Currently, we have no way to expose the arch-specific default cache
model because the cache model is sometimes related to the CPU model
(e.g., i386).
Since the user might configure "default" level, any comparison with
"default" is meaningless before the machine knows the specific level
that "default" refers to.
We can only check the correctness of the cache topology after the arch
loads the user-configured cache model from MachineState.smp_cache and
consumes the special "default" level by replacing it with the specific
level.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-6-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add cache_supported flags in SMPCompatProps to allow machines to
configure various caches support.
And check the compatibility of the cache properties with the
machine support in machine_parse_smp_cache().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-5-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The x86 and ARM need to allow user to configure cache properties
(current only topology):
* For x86, the default cache topology model (of max/host CPU) does not
always match the Host's real physical cache topology. Performance can
increase when the configured virtual topology is closer to the
physical topology than a default topology would be.
* For ARM, QEMU can't get the cache topology information from the CPU
registers, then user configuration is necessary. Additionally, the
cache information is also needed for MPAM emulation (for TCG) to
build the right PPTT.
Define smp-cache related enumeration and properties in QAPI, so that
user could configure cache properties for SMP system through -machine in
the subsequent patch.
Cache enumeration (CacheLevelAndType) is implemented as the combination
of cache level (level 1/2/3) and cache type (data/instruction/unified).
Currently, separated L1 cache (L1 data cache and L1 instruction cache)
with unified higher-level cache (e.g., unified L2 and L3 caches), is the
most common cache architectures.
Therefore, enumerate the L1 D-cache, L1 I-cache, L2 cache and L3 cache
with smp-cache object to add the basic cache topology support. Other
kinds of caches (e.g., L1 unified or L2/L3 separated caches) can be
added directly into CacheLevelAndType if necessary.
Cache properties (SmpCacheProperties) currently only contains cache
topology information, and other cache properties can be added in it
if necessary.
Note, define cache topology based on CPU topology level with two
reasons:
1. In practice, a cache will always be bound to the CPU container
(either private in the CPU container or shared among multiple
containers), and CPU container is often expressed in terms of CPU
topology level.
2. The x86's cache-related CPUIDs encode cache topology based on APIC
ID's CPU topology layout. And the ACPI PPTT table that ARM/RISCV
relies on also requires CPU containers to help indicate the private
shared hierarchy of the cache. Therefore, for SMP systems, it is
natural to use the CPU topology hierarchy directly in QEMU to define
the cache topology.
With smp-cache QAPI support, add smp cache topology for machine by
parsing the smp-cache object list.
Also add the helper to access/update cache topology level of machine.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-4-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cache topology needs to be defined based on CPU topology levels. Thus,
define CPU topology enumeration in qapi/machine.json to make it generic
for all architectures.
To match the general topology naming style, rename CPU_TOPO_LEVEL_* to
CPU_TOPOLOGY_LEVEL_*, and rename SMT and package levels to thread and
socket.
Also, enumerate additional topology levels for non-i386 arches, and add
a CPU_TOPOLOGY_LEVEL_DEFAULT to help future smp-cache object to work
with compatibility requirement of arch-specific cache topology models.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241101083331.340178-3-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the follow-up change, the CPU topology enumeration will be moved to
QAPI. And considerring "invalid" should not be exposed to QAPI as an
unsettable item, so, as a preparation for future changes, remove
"invalid" level from the current CPU topology enumeration structure
and define it by a macro instead.
Due to the removal of the enumeration of "invalid", bit 0 of
CPUX86State.avail_cpu_topo bitmap will no longer correspond to "invalid"
level, but will start at the SMT level. Therefore, to honor this change,
update the encoding rule for CPUID[0x1F].
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-2-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Include the missing "qemu/units.h" to fix when refactoring code:
../hw/core/machine.c:743:34: error: use of undeclared identifier 'MiB'
743 | mc->default_ram_size = 128 * MiB;
| ^
../hw/core/machine.c:750:44: error: use of undeclared identifier 'TiB'
750 | mc->smbios_memory_device_size = 2047 * TiB;
| ^
and "qemu/error-report.h" to fix:
../hw/core/machine.c:1029:13: error: call to undeclared function 'error_report' [-Wimplicit-function-declaration]
1029 | error_report("NUMA node %" PRIu16 " is missing, use "
| ^
../hw/core/machine.c:1240:9: error: call to undeclared function 'warn_report' [-Wimplicit-function-declaration]
1240 | warn_report("CPU model %s is deprecated -- %s",
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240930221900.59525-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replace DEFINE_MACHINE() by DEFINE_TYPES(), converting the
class_init() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-6-philmd@linaro.org>
The machine datasheet mentions the GPIO device as 'xps_gpio'.
Rename it accordingly to easily find its documentation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-5-philmd@linaro.org>
By default the machine's CPU endianness is 'big' order
('little-endian' property set to %false).
This corresponds to the default when this machine was added;
see commits 6a8b1ae202 "microblaze: Add petalogix s3a1800dsp
MMU linux ref-design." and 72b675caac "microblaze: Hook into
the build-system." which added:
[ "$target_cpu" = "microblaze" ] && target_bigendian=yes
Later commit 877fdc12b1 ("microblaze: Allow targeting
little-endian mb") added little-endian support, forgetting
to set the CPU endianness to little-endian. Not an issue
since this property was never used, but we will use it soon,
so explicit the endianness to get the expected behavior.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-4-philmd@linaro.org>
The petalogix-ml605 machine was explicitly added as little-endian only
machine in commit 00914b7d97 ("microblaze: Add PetaLogix ml605 MMU
little-endian ref design"). Mark the big-endian version as deprecated.
When the xlnx-zynqmp-pmu machine's CPU was added in commit 133d23b3ad
("xlnx-zynqmp-pmu: Add the CPU and memory"), its 'endianness' property
was set to %true, thus wired in little endianness.
Both machine are included in the big-endian system binary, while their
CPU is working in little-endian. Unlikely to work as it. Deprecate now
as broken config so we can remove soon.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-3-philmd@linaro.org>
Alias the 'endian' property as 'little-endian' because the 'ENDI'
bit is set when the endianness is in little order, and unset in
big order.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20241105130431.22564-2-philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <3f61b85c-9382-4520-a1ce-5476eb16fb56@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Fixed eMMC size calculation
* Fixed IRQ definitions on AST2700
* Added RTC support to AST2700
* Fixed timer IRQ status on AST2600
* Improved SDHCI model with new registers
* Added -nodefaults support to AST1030
* Provided a way to use an eMMC device without boot partitions
-----BEGIN PGP SIGNATURE-----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=ms8H
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20241104' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fixed eMMC size calculation
* Fixed IRQ definitions on AST2700
* Added RTC support to AST2700
* Fixed timer IRQ status on AST2600
* Improved SDHCI model with new registers
* Added -nodefaults support to AST1030
* Provided a way to use an eMMC device without boot partitions
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmcoo4oACgkQUaNDx8/7
# 7KGYAQ/9GWiwM7SHFD/WTEo6iClQCk+Do3pzGXZPQq7WLqYhBU8mYwSaqMDUtXj+
# MQVywyLxSYaKdCKessN0haATyzEDVRtxKwIRnbrSDWWnxG8NGj2esOTsU6/wgfD4
# FqARaMH91FQB6rY8QbmbGmqTJ1QbWEPXj7v2piJol5dvI2Oe8iqn/6z1Cv4NMXwh
# aYHwSVwcHLD9tfmyXP0DKN/XHLC4pTAOoU96ajcN6RRW+D6vuQEsQq0caZt8CHQc
# I2oSptU+RZF2DPbSeEB42y9I138/kQzTIaVnbBN//NLRwbzRsLlXhA92F2CJyDrD
# FGNQyynteil8F7M5Oab47fFia1QF/v4G45VOAsHpT1tLBsZPKJdRwfLLqDPZbVbG
# 2lAVuukqW0gKoEHsXfVsDzcIxpX81SlUsccHY4kCxsRNnwSzCWaDK9OOTx3CAxjG
# CzzDgQszNr/12dzkWExIhLpMhQNeiUXX1veAH/jzbjyRAKxzjkDYaX2lUC3MfmqX
# irjmzOU0AbtComv4ybeBqtqNmQvUx5/y993Hgakc9mqqCoAm/Fn4qtx6uW5vSSZJ
# w4heyWbzcLp5RIzSYZypWlmgI+3bJgJq2aX276MYqAe3m8PnUCkuW9NTsfb+ARMl
# XGExHPNrAsw7eiiQsTa7Byt/jkEf3KmEp8ye+3cAvJwPgxlDyys=
# =ms8H
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 10:35:54 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20241104' of https://github.com/legoater/qemu:
aspeed: Don't set always boot properties of the emmc device
aspeed: Support create flash devices via command line for AST1030
hw/sd/aspeed_sdhci: Introduce Capabilities Register 2 for SD slot 0 and 1
hw/timer/aspeed: Fix interrupt status does not be cleared for AST2600
hw/timer/aspeed: Fix coding style
aspeed/soc: Support RTC for AST2700
hw/arm/aspeed_ast27x0: Avoid hardcoded '256' in IRQ calculation
hw/arm/aspeed_ast27x0: Use bsa.h for PPI definitions
hw/sd/sdcard: Fix calculation of size when using eMMC boot partitions
hw/arm: enable at24c with aspeed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmcoEicACgkQZ7MCdqhi
HK5M8Q//fz+ZkJndXkBjb1Oinx+q+eVtNm2JrvcWIsXyhG3K+6VxYPp69H+SRv/Z
TWuUqMQPxq8mhQvBJlDAttp/oaUEiOcCRvs/iUoBN12L4mVxXfdoT88TZ4frN3eP
8bePq+DW2N/7gpmsJm5CyEZPpcf9AjVHgLRp3KYFkOJ/14uzvuwnocU39gl+2IUh
MXHTedQgMNXaKorJXk1NVdM6NxMuVhOvwxAs6ya2gwhxyA5tteo5PiQOnDJWkejf
xg3RRsNzGYcs1Qg/3kFIf3RfEB0aYbPxROM8IfPaJWKN5KnMggj/JAkHyK1x/V3J
wml7+cB0doMt/yRiuYJhXpyrtOqpvjRWPA6RhxECWW2kwrovv8NAF8IrFnw9NvOQ
QC66ZaaFcbAcFrVT1e/iggU76d01II6m4OAgKcXw+FRHgps4VU9y83j7ApNnNUWN
IXp9hkzoHi5VwX0FrG4ELUr2iEf1HASMvM8EZ/0AxzWj5iNtQB8lFsrEdaGVXyIS
M5JaJeNjCn4koCyYaFSctH5eKtbzIwnGWnDcdTwaOuQ+9itBvY8O+HZalE6sAc5S
kLFZ7i/Ut/qxbY5pMumt8LKD4pR1SsOxFB8dJCmn/f/tvRGtIVsoY6btNe4M0+24
42MxZbWO6W379C32bwbtsPiGA+aLSgShjP4cWm9cgRjz4RJFnwg=
=vmIG
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu into staging
* Various bug fixes
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmcoEicACgkQZ7MCdqhi
# HK5M8Q//fz+ZkJndXkBjb1Oinx+q+eVtNm2JrvcWIsXyhG3K+6VxYPp69H+SRv/Z
# TWuUqMQPxq8mhQvBJlDAttp/oaUEiOcCRvs/iUoBN12L4mVxXfdoT88TZ4frN3eP
# 8bePq+DW2N/7gpmsJm5CyEZPpcf9AjVHgLRp3KYFkOJ/14uzvuwnocU39gl+2IUh
# MXHTedQgMNXaKorJXk1NVdM6NxMuVhOvwxAs6ya2gwhxyA5tteo5PiQOnDJWkejf
# xg3RRsNzGYcs1Qg/3kFIf3RfEB0aYbPxROM8IfPaJWKN5KnMggj/JAkHyK1x/V3J
# wml7+cB0doMt/yRiuYJhXpyrtOqpvjRWPA6RhxECWW2kwrovv8NAF8IrFnw9NvOQ
# QC66ZaaFcbAcFrVT1e/iggU76d01II6m4OAgKcXw+FRHgps4VU9y83j7ApNnNUWN
# IXp9hkzoHi5VwX0FrG4ELUr2iEf1HASMvM8EZ/0AxzWj5iNtQB8lFsrEdaGVXyIS
# M5JaJeNjCn4koCyYaFSctH5eKtbzIwnGWnDcdTwaOuQ+9itBvY8O+HZalE6sAc5S
# kLFZ7i/Ut/qxbY5pMumt8LKD4pR1SsOxFB8dJCmn/f/tvRGtIVsoY6btNe4M0+24
# 42MxZbWO6W379C32bwbtsPiGA+aLSgShjP4cWm9cgRjz4RJFnwg=
# =vmIG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 00:15:35 GMT
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu: (67 commits)
MAINTAINERS: Remove myself as reviewer
MAINTAINERS: Remove myself from XIVE
MAINTAINERS: Remove myself from the PowerNV machines
hw/ppc: Consolidate ppc440 initial mapping creation functions
hw/ppc: Consolidate e500 initial mapping creation functions
tests/qtest: Add XIVE tests for the powernv10 machine
pnv/xive2: TIMA CI ops using alternative offsets or byte lengths
pnv/xive2: TIMA support for 8-byte OS context push for PHYP
pnv/xive: Update PIPR when updating CPPR
pnv/xive: Add special handling for pool targets
ppc/xive2: Support "Pull Thread Context to Odd Thread Reporting Line"
ppc/xive2: Change context/ring specific functions to be generic
ppc/xive2: Support "Pull Thread Context to Register" operation
ppc/xive2: Allow 1-byte write of Target field in TIMA
ppc/xive2: Dump the VP-group and crowd tables with 'info pic'
ppc/xive2: Dump more NVP state with 'info pic'
pnv/xive2: Support for "OS LGS Push" TIMA operation
ppc/xive2: Support TIMA "Pull OS Context to Odd Thread Reporting Line"
pnv/xive2: Define OGEN field in the TIMA
pnv/xive: TIMA patch sets pre-req alignment and formatting changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove dead code which always returns success, since PRCHK will have a
value of zero.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Link: https://lore.kernel.org/r/20241022222105.3609223-1-arun.kka@samsung.com
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the NPDGL and NPDAL fields to support large alignment and
granularities.
Signed-off-by: Ayush Mishra <ayush.m55@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Link: https://lore.kernel.org/r/20241001012833.3551820-1-ayush.m55@samsung.com
[k.jensen: renamed the enum values]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for the I/O Command Set Independent Namespace Data
Structure (CNS 8h and 1fh).
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Link: https://lore.kernel.org/r/20240925004407.3521406-1-arun.kka@samsung.com
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* Various fixes, improvements and additions for the functional test suite
* Restore the sh4eb target
* Fix the OpenBSD VM test
* Re-enable the pci-bridge device on s390x
* Minor clean-ups / fixes for the next-cube machine
-----BEGIN PGP SIGNATURE-----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=CTOw
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-11-04' of https://gitlab.com/thuth/qemu into staging
* Remove the redundant macOS-15 CI job
* Various fixes, improvements and additions for the functional test suite
* Restore the sh4eb target
* Fix the OpenBSD VM test
* Re-enable the pci-bridge device on s390x
* Minor clean-ups / fixes for the next-cube machine
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmcoyoQRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVwRg/+M8RWxOW5M2GmEfAj/e1IatLS2eXek6fE
# YOCPxvc5VK5rjXzcRKNqNKP53gBkF0PRho68b3IkBI6ylDOdzdRcDYsi8CSLWbG4
# O6heGJRzn9HyIS+UShAoqoj9l7lxODcZvEJK2ueiy/Hri/Zc4TpullLhSgAPKTgn
# Ln75nd+hWwS9e0df1BSOBax2iEU/2j1yuBVCcFgFHH8K39Wqrs6Xtyay9yPjYLUg
# pHNGObikrLF47KGI5yZ22/iVgwr5yhd3KzycjbxHVccCqZSsGl2xkCBwKNlIodRO
# RMhTzUhOMi/RSjvdSbM5d2Nh4aCJ5mNzzWSUklHdYWnrMOv6uECJ0h2o0ve5L4kT
# jtTGTcLe8a+JsDs+UxeVWqqlUf4w8Vv0DRky6D6ln25hcqrOveJE++o58FHFt/AX
# jEolRU5k2tMpOSMgE3wAi5BVCttpI3Idly/IC+rntMjQOTwdKPlgfcBIqQmXI6M8
# dM6oUf9WnIr/CAt7qG6QjCONjeBmuMlZV4+v7xdqFsJpwCTyo6k3LwoHx3pTC73z
# 6x0SmpeDoTzdw6B7O1HlLNllW7hd2/5GQ5qTH+E1pKAktkOf3MQeSD6qQEMjwH7T
# e7hNUV+APgtDqpnQ0xcTL5AwNAkDGKoKBmaIp0vlwGUET55fw5N0Wb6Oo9LOgeFl
# yqi5GxIuJu4=
# =CTOw
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 13:22:12 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-11-04' of https://gitlab.com/thuth/qemu:
tests/functional: Convert the OrangePi tests to the functional framework
tests/functional: Convert BananaPi tests to the functional framework
tests/functional: Convert the tcg_plugins test
next-cube: remove cpu parameter from next_scsi_init()
next-cube: fix up compilation when DEBUG_NEXT is enabled
hw/s390x: Re-enable the pci-bridge device on s390x
tests/functional: Fix the s390x and ppc64 tuxrun tests
tests/vm/openbsd: Remove the "Time appears wrong" workaround
tests/functional: Add a test for sh4eb
Revert "Remove the unused sh4eb target"
tests/functional: make cached asset files read-only
tests/functional: make tuxrun disk images writable
.gitlab-ci.d/cirrus: Remove the macos-15 job
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Please pull a single commit, which updates SeaBIOS-hppa
to version 17.
If comes with some important firmware and SCSI fixes and
prepares for futher development to support 64-bit HP-UX
and MPE/UX in the future.
New PDC functions & general enhancements:
- Add PDC_MODEL_GET_INSTALL_KERNEL firmware call
- Add PDC_PAT_EVENT firmware call
- Support ENTRY_IO_BOOTOUT
- Prefer memory-access over io-access of GSP serial port
- Disable LMMIO_DIRECT0 range during modification
- Small optimizations in IODC call
Fixes:
- esp-scsi: indicate acceptance of MESSAGE IN phase data
- Avoid crash when booting without SCSI controller
- Remove exec flag from hppa-firmware.img
- Fix LMMIO detection for PCI cards on Astro/Elroy
- Avoid trashing MPE IPL bootloader stack
- HP-UX 11 64-bit saves number of RAM pages in PAGE0 at 0x33c
- Fix return value of PDC_CACHE/PDC_CACHE_RET_SPID for space id hashing
- Allow PDC functions to act when called in narrow mode
- pcidevice: Use portaddr_t for io port addresses
Cleanups:
- Change default make target to "parisc"
- Clean the "out-64" directory on "make clean"
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZyfV0AAKCRD3ErUQojoP
X63XAP9sxLngebfWXdb9YI4+3N2xBpT772tQha3QYdejF0QvrAEAwpB8g8MFHHz3
QKZfvPERw2nBhjtpf+Dl9iexoKh8YQI=
=MjU+
-----END PGP SIGNATURE-----
Merge tag 'seabios-hppa-v17-pull-request' of https://github.com/hdeller/qemu-hppa into staging
SeaBIOS-hppa v17 pull request
Please pull a single commit, which updates SeaBIOS-hppa
to version 17.
If comes with some important firmware and SCSI fixes and
prepares for futher development to support 64-bit HP-UX
and MPE/UX in the future.
New PDC functions & general enhancements:
- Add PDC_MODEL_GET_INSTALL_KERNEL firmware call
- Add PDC_PAT_EVENT firmware call
- Support ENTRY_IO_BOOTOUT
- Prefer memory-access over io-access of GSP serial port
- Disable LMMIO_DIRECT0 range during modification
- Small optimizations in IODC call
Fixes:
- esp-scsi: indicate acceptance of MESSAGE IN phase data
- Avoid crash when booting without SCSI controller
- Remove exec flag from hppa-firmware.img
- Fix LMMIO detection for PCI cards on Astro/Elroy
- Avoid trashing MPE IPL bootloader stack
- HP-UX 11 64-bit saves number of RAM pages in PAGE0 at 0x33c
- Fix return value of PDC_CACHE/PDC_CACHE_RET_SPID for space id hashing
- Allow PDC functions to act when called in narrow mode
- pcidevice: Use portaddr_t for io port addresses
Cleanups:
- Change default make target to "parisc"
- Clean the "out-64" directory on "make clean"
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZyfV0AAKCRD3ErUQojoP
# X63XAP9sxLngebfWXdb9YI4+3N2xBpT772tQha3QYdejF0QvrAEAwpB8g8MFHHz3
# QKZfvPERw2nBhjtpf+Dl9iexoKh8YQI=
# =MjU+
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 03 Nov 2024 19:58:08 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'seabios-hppa-v17-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 17
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZyXbXgAKCRBAov/yOSY+
37a9BADZ7vI2idWNXdH+mLNDZNSOxfdKp6ggNgKS3S48Hi2zR72MEhwvR9dGlHDL
98agrbV7/jI9Z+0dLAxvlyl1MvXfnn2sXYgUuZp6IAaQzFBa11HBAK7UFh3sTA4A
gD4oPwl8AdJiFvDN6vNjS+dO0ls+j/YMaoLkAKLv15dlWtg4Rw==
=EZnr
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241102' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241102
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZyXbXgAKCRBAov/yOSY+
# 37a9BADZ7vI2idWNXdH+mLNDZNSOxfdKp6ggNgKS3S48Hi2zR72MEhwvR9dGlHDL
# 98agrbV7/jI9Z+0dLAxvlyl1MvXfnn2sXYgUuZp6IAaQzFBa11HBAK7UFh3sTA4A
# gD4oPwl8AdJiFvDN6vNjS+dO0ls+j/YMaoLkAKLv15dlWtg4Rw==
# =EZnr
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 02 Nov 2024 07:57:18 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241102' of https://gitlab.com/gaosong/qemu:
target/loongarch: Add steal time support on migration
hw/loongarch/boot: Use warn_report when no kernel filename
linux-headers: Update to Linux v6.12-rc5
linux-headers: loongarch: Add kvm_para.h
linux-headers: Add unistd_64.h
target/loongarch/kvm: Implement LoongArch PMU extension
target/loongarch: Implement lbt registers save/restore function
target/loongarch: Add loongson binary translation feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the OrangePi tests from tests/avocado/boot_linux_console.py into
a new file dedicated for OrangePi tests in the functional framework
and update the hash sums of the assets to sha256 along the way.
For the buildroot image and the Armbian image, we've got to switch to
a newer version since the old images have been removed from the server,
and the NetBSD image has been moved to the archive, so we need to update
this URL as well.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241029092440.25021-3-thuth@redhat.com>
Move the BananaPi tests from tests/avocado/boot_linux_console.py into
a new file dedicated for Banana Pi tests in the functional framework.
Update the hash sums of the assets to sha256 along the way and fix the
broken link for the buildroot image from storage.kernelci.org.
(Note: The test_arm_bpim2u_openwrt_22_03_3 test is currently broken
due to a regression in commit 4c2c047469 ("target/arm: Fix usage of MMU
indexes when EL3 is AArch32") - it works if that commit gets reverted)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241029092440.25021-2-thuth@redhat.com>
A straight forward conversion, only the usual changes were required
here (i.e. adjustment for asset downloading, machine selection).
Message-ID: <20241023051754.813412-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The parameter is not used.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241023085852.1061031-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These were accidentally introduced by my last series.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241023085852.1061031-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e779e5c05a ("hw/pci-bridge: Add a Kconfig switch for the
normal PCI bridge") added a config switch for the pci-bridge, so
that the device is not included in the s390x target anymore (since
the pci-bridge is not really useful on s390x).
However, it seems like libvirt is still adding pci-bridge devices
automatically to the guests' XML definitions (when adding a PCI
device to a non-zero PCI bus), so these guests are now broken due
to the missing pci-bridge in the QEMU binary.
To avoid disruption of the users, let's re-enable the pci-bridge
device on s390x for the time being.
Message-ID: <20241024130405.62134-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I forgot to add the tests to the meson.build file and looks
like I even managed to somehow mix up the hashsums in the
ppc64 test!
Message-ID: <20241023141919.930689-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Seems like the server now reports the right time again, so we have
to drop the workaround to get the installer working again.
Message-ID: <20241023072414.827732-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we are aware of binaries that are available for sh4eb,
we should make sure that there are no regressions with this
target and test it regularly in our CI.
Message-ID: <20241024082735.42324-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 73ceb12960.
The "r2d" machine can work in big endian mode, see:
https://lore.kernel.org/qemu-devel/d6755445-1060-48a8-82b6-2f392c21f9b9@landley.net/
So the reasoning for removing sh4eb was wrong.
Message-ID: <20241024082735.42324-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Rob Landley <rob@landley.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This ensures that if a functional test runs QEMU with a writable
disk pointing to a cached asset, an error will be reported, rather
than silently modifying the cache file.
As an example, tweaking test_sbsaref.py to set snapshot=off,
results in a clear error:
Command: ./build/qemu-system-aarch64 ...snip... -drive file=/var/home/berrange/.cache/qemu/download/44cdbae275ef1bb6dab1d5fbb59473d4f741e1c8ea8a80fd9e906b531d6ad461,format=raw,snapshot=off -cpu max,pauth=off
Output: qemu-system-aarch64: Could not open '/var/home/berrange/.cache/qemu/download/44cdbae275ef1bb6dab1d5fbb59473d4f741e1c8ea8a80fd9e906b531d6ad461': Permission denied
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241025092659.2312118-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The zstd command will preserve the input archive permissions on the
output file. So when we decompress the readonly cached image, the
resulting per-test run private disk image will also be readonly.
We need it to be writable, so make it so.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241025092659.2312118-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cirrus-CI stopped providing the possibility to run macOS 15 jobs.
Quoting https://cirrus-ci.org/guide/macOS/ :
"Cirrus CI Cloud only allows ghcr.io/cirruslabs/macos-runner:sonoma image ..."
If you still try to run a Sequoia image, it gets automatically "upgraded"
to Sonoma instead. So the macos-15 job in the QEMU CI now does not
make sense anymore, thus let's remove it.
Message-ID: <20241021124722.139348-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
v2:
- Patch "migration: Move cpu-throttle.c from system to migration",
fix build on MacOS, and subject spelling
NOTE: checkpatch.pl could report a false positive on this branch:
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#21:
{include/sysemu => migration}/cpu-throttle.h | 0
That's covered by "F: migration/" entry.
Changelog:
- Peter's cleanup patch on migrate_fd_cleanup()
- Peter's cleanup patch to introduce thread name macros
- Hanna's error path fix for vmstate subsection save()s
- Hyman's auto converge enhancement on background dirty sync
- Peter's additional tracepoints for save state entries
- Thomas's build fix for OpenBSD in dirtyrate.c
- Peter's deprecation of query-migrationthreads command
- Peter's cleanup/fixes from the "export misc.h" series
- Maciej's two small patches from multifd+vfio series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZyTbVRIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wan3wD+L4TVNDc34Hy4mvWu7u1lCOePX0GBdUEc
oEeBGblwbrcBAIR8d+5z9O5YcWH1coozG1aUC4qCtSHHk5TGbJk4/UUD
=XB5Q
-----END PGP SIGNATURE-----
Merge tag 'migration-20241030-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request for softfreeze
v2:
- Patch "migration: Move cpu-throttle.c from system to migration",
fix build on MacOS, and subject spelling
NOTE: checkpatch.pl could report a false positive on this branch:
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#21:
{include/sysemu => migration}/cpu-throttle.h | 0
That's covered by "F: migration/" entry.
Changelog:
- Peter's cleanup patch on migrate_fd_cleanup()
- Peter's cleanup patch to introduce thread name macros
- Hanna's error path fix for vmstate subsection save()s
- Hyman's auto converge enhancement on background dirty sync
- Peter's additional tracepoints for save state entries
- Thomas's build fix for OpenBSD in dirtyrate.c
- Peter's deprecation of query-migrationthreads command
- Peter's cleanup/fixes from the "export misc.h" series
- Maciej's two small patches from multifd+vfio series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZyTbVRIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wan3wD+L4TVNDc34Hy4mvWu7u1lCOePX0GBdUEc
# oEeBGblwbrcBAIR8d+5z9O5YcWH1coozG1aUC4qCtSHHk5TGbJk4/UUD
# =XB5Q
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Nov 2024 13:44:53 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20241030-pull-request' of https://gitlab.com/peterx/qemu:
migration/multifd: Zero p->flags before starting filling a packet
migration/ram: Add load start trace event
migration: Drop migration_is_idle()
migration: Drop migration_is_setup_or_active()
migration: Unexport ram_mig_init()
migration: Unexport dirty_bitmap_mig_init()
migration: Take migration object refcount earlier for threads
migration: Deprecate query-migrationthreads command
migration/dirtyrate: Silence warning about strcpy() on OpenBSD
tests/migration: Add case for periodic ramblock dirty sync
migration: Support periodic RAMBlock dirty bitmap sync
migration: Remove "rs" parameter in migration_bitmap_sync_precopy
migration: Move cpu-throttle.c from system to migration
migration: Stop CPU throttling conditionally
accel/tcg/icount-common: Remove the reference to the unused header file
migration: Ensure vmstate_save() sets errp
migration: Put thread names together with macros
migration: Cleanup migrate_fd_cleanup() on accessing to_dst_file
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-ga on a NetBSD -current VM terminates with a SIGSEGV upon receiving
'guest-set-time' command...
Core was generated by `qemu-ga'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x000000000cd37a40 in ga_pipe_read_str (fd=fd@entry=0xffffff922a20, str=str@entry=0xffffff922a18)
at ../qga/commands-posix.c:88
88 *str[len] = '\0';
[Current thread is 1 (process 1112)]
(gdb) bt
#0 0x000000000cd37a40 in ga_pipe_read_str (fd=fd@entry=0xffffff922a20, str=str@entry=0xffffff922a18)
at ../qga/commands-posix.c:88
#1 0x000000000cd37b60 in ga_run_command (argv=argv@entry=0xffffff922a90,
action=action@entry=0xcda34b8 "set hardware clock to system time", errp=errp@entry=0xffffff922a70, in_str=0x0)
at ../qga/commands-posix.c:164
#2 0x000000000cd380c4 in qmp_guest_set_time (has_time=<optimized out>, time_ns=<optimized out>,
errp=errp@entry=0xffffff922ad0) at ../qga/commands-posix.c:304
#3 0x000000000cd253d8 in qmp_marshal_guest_set_time (args=<optimized out>, ret=<optimized out>, errp=0xffffff922b48)
at qga/qga-qapi-commands.c:193
#4 0x000000000cd4e71c in qmp_dispatch (cmds=cmds@entry=0xcdf5b18 <ga_commands>, request=request@entry=0xf3c711a4b000,
allow_oob=allow_oob@entry=false, cur_mon=cur_mon@entry=0x0) at ../qapi/qmp-dispatch.c:220
#5 0x000000000cd36524 in process_event (opaque=0xf3c711a79000, obj=0xf3c711a4b000, err=0x0) at ../qga/main.c:677
#6 0x000000000cd526f0 in json_message_process_token (lexer=lexer@entry=0xf3c711a79018, input=0xf3c712072480,
type=type@entry=JSON_RCURLY, x=28, y=1) at ../qobject/json-streamer.c:99
#7 0x000000000cd93860 in json_lexer_feed_char (lexer=lexer@entry=0xf3c711a79018, ch=125 '}', flush=flush@entry=false)
at ../qobject/json-lexer.c:313
#8 0x000000000cd93a00 in json_lexer_feed (lexer=lexer@entry=0xf3c711a79018,
buffer=buffer@entry=0xffffff922d10 "{\"execute\":\"guest-set-time\"}\n", size=<optimized out>)
at ../qobject/json-lexer.c:350
#9 0x000000000cd5290c in json_message_parser_feed (parser=parser@entry=0xf3c711a79000,
buffer=buffer@entry=0xffffff922d10 "{\"execute\":\"guest-set-time\"}\n", size=<optimized out>)
at ../qobject/json-streamer.c:121
#10 0x000000000cd361fc in channel_event_cb (condition=<optimized out>, data=0xf3c711a79000) at ../qga/main.c:703
#11 0x000000000cd3710c in ga_channel_client_event (channel=<optimized out>, condition=<optimized out>, data=0xf3c711b2d300)
at ../qga/channel-posix.c:94
#12 0x0000f3c7120d9bec in g_main_dispatch () from /usr/pkg/lib/libglib-2.0.so.0
#13 0x0000f3c7120dd25c in g_main_context_iterate_unlocked.constprop () from /usr/pkg/lib/libglib-2.0.so.0
#14 0x0000f3c7120ddbf0 in g_main_loop_run () from /usr/pkg/lib/libglib-2.0.so.0
#15 0x000000000cda00d8 in run_agent_once (s=0xf3c711a79000) at ../qga/main.c:1522
#16 run_agent (s=0xf3c711a79000) at ../qga/main.c:1559
#17 main (argc=<optimized out>, argv=<optimized out>) at ../qga/main.c:1671
(gdb)
The commandline options used on the host machine...
qemu-system-aarch64 \
-machine type=virt,pflash0=rom \
-m 8G \
-cpu host \
-smp 8 \
-accel hvf \
-device virtio-net-pci,netdev=unet \
-device virtio-blk-pci,drive=hd \
-drive file=netbsd.qcow2,if=none,id=hd \
-netdev user,id=unet,hostfwd=tcp::2223-:22 \
-object rng-random,filename=/dev/urandom,id=viornd0 \
-device virtio-rng-pci,rng=viornd0 \
-serial mon:stdio \
-display none \
-blockdev node-name=rom,driver=file,filename=/opt/homebrew/Cellar/qemu/9.0.2/share/qemu/edk2-aarch64-code.fd,read-only=true \
-chardev socket,path=/tmp/qga_netbsd.sock,server=on,wait=off,id=qga0 \
-device virtio-serial \
-device virtconsole,chardev=qga0,name=org.qemu.guest_agent.0
This patch rectifies the operator precedence while assigning the NUL
terminator.
Fixes: c3f32c13a3
Signed-off-by: Sunil Nimmagadda <sunil@nimmagadda.net>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/m15xppk9qg.fsf@nimmagadda.net
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reported by clang++, but not by g++.
../qga/vss-win32/provider.cpp:48:6: error: no previous prototype for function 'LockModule' [-Werror,-Wmissing-prototypes]
48 | void LockModule(BOOL lock)
| ^
../qga/vss-win32/provider.cpp:48:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
48 | void LockModule(BOOL lock)
| ^
| static
../qga/vss-win32/provider.cpp:531:13: error: no previous prototype for function 'DllMain' [-Werror,-Wmissing-prototypes]
531 | BOOL WINAPI DllMain(HINSTANCE hinstDll, DWORD dwReason, LPVOID lpReserved)
| ^
../qga/vss-win32/provider.cpp:531:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
531 | BOOL WINAPI DllMain(HINSTANCE hinstDll, DWORD dwReason, LPVOID lpReserved)
| ^
| static
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20241031040426.772604-7-pierrick.bouvier@linaro.org
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Commit e554e45b44 ("aspeed: Tune eMMC device properties to reflect
HW strapping") added support to boot from an eMMC device by setting
the boot properties of the eMMC device. This change made the
assumption that the device always has boot areas.
However, if the machine boots from the flash device (or -kernel) and
uses an eMMC device without boot areas, support would be broken. This
impacts the ast2600-evb machine which can choose to boot from flash or
eMMC using the "boot-emmc" machine option.
To provide some flexibility for Aspeed machine users to use different
flavors of eMMC devices (with or without boot areas), do not set the
eMMC device boot properties when the machine is not configured to boot
from eMMC. However, this approach makes another assumption about eMMC
devices, namely that eMMC devices from which the machine does not boot
do not have boot areas.
A preferable alternative would be to add support for user creatable
eMMC devices and define the device boot properties on the QEMU command
line :
-blockdev node-name=emmc0,driver=file,filename=mmc-ast2600-evb.raw \
-device emmc,bus=sdhci-bus.2,drive=emmc0,boot-partition-size=1048576,boot-config=8
This is a global change requiring more thinking. Nevertheless, in the
case of the ast2600-evb machine booting from an eMMC device and when
default devices are created, the proposed change still makes sense
since the device is required to have boot areas.
Cc: Jan Luebbe <jlu@pengutronix.de>
Fixes: e554e45b44 ("aspeed: Tune eMMC device properties to reflect
HW strapping")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a "if-statement" in aspeed_minibmc_machine_init function. If users add
"-nodefaults" in command line, the flash devices should be created by users
setting. Otherwise, the flash devices are created at machine init.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The size of SDHCI capabilities register is 64bits, so introduces new
Capabilities Register 2 for SD slot 0 (0x144) and SD slot1 (0x244).
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[ clg: Fixed code alignment ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of AST2600 description, interrupt status set by HW
and clear to "0" by software writing "1" on the specific bit.
Therefore, if firmware set the specific bit "1" in the interrupt status
register(0x34), the specific bit of "s->irq_sts" should be cleared 0.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Fixes: fadefada4d ("aspeed/timer: Add support for IRQ status register on the AST2600")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The RTC controller between AST2600 and AST2700 are identical. Add RTC model for
AST2700 RTC support. The RTC controller registers base address is start at
0x12C0_F000 and its alarm interrupt is connected to GICINT13.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
When calculating the index into the GIC's GPIO array for per-CPU
interrupts, we have to start with the number of SPIs. The code
currently hard-codes this to 'NUM_IRQS = 256'. However the number of
SPIs is set separately and implicitly by the value of
AST2700_MAX_IRQ, which is the number of SPIs plus 32 (since it is
what we set the GIC num-irq property to).
Define AST2700_MAX_IRQ as the total number of SPIs; this brings
AST2700 into line with AST2600, which defines AST2600_MAX_IRQ as the
number of SPIs not including the 32 internal interrupts. We can then
use AST2700_MAX_IRQ instead of the hardcoded 256.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use the private peripheral interrupt definitions from bsa.h instead
of defining them locally.
Note that bsa.h defines these values as INTID values, which are all
16 greater than the PPI values that we were previously using. So we
refactor the code to use INTID-based values to match that.
This is the same thing we did in commit d40ab068c0 for sbsa-ref.
It removes the "same constant, different values" confusion where this
board code and bsa.h both define an ARCH_GIC_MAINT_IRQ, and allows us
to use symbolic names for the timer interrupt IDs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The sd_bootpart_offset() function calculates the *runtime* offset which
changes as the guest switches between accessing the main user data area
and the boot partitions by writing to the EXT_CSD_PART_CONFIG_ACC_MASK
bits, so it shouldn't be used to calculate the main user data area size.
Instead, subtract the boot_part_size directly (twice, as there are two
identical boot partitions defined by the eMMC spec).
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Fixes: c8cb19876d ("hw/sd/sdcard: Support boot area in emmc image")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
