Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images
specially built for this purpose.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Up until now, the EXTI implementation had 16 inbound GPIOs connected to
the 16 outbound GPIOs of STM32L4x5 SYSCFG.
The EXTI actually handles 40 lines (namely 5 from STM32L4x5 USART
devices which are already implemented in QEMU).
In order to connect USART devices to EXTI, this commit consolidates
constants `EXTI_NUM_INTERRUPT_OUT_LINES` (40) and
`EXTI_NUM_GPIO_EVENT_IN_LINES` (16) into `EXTI_NUM_LINES` (40).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
-----BEGIN PGP SIGNATURE-----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=fLCx
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240702' of https://github.com/philmd/qemu into staging
Misc HW patches queue
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaDiSQACgkQ4+MsLN6t
# wN4jmBAA2kxwFAGbKvokANDAZBwWmJdnuIPcqS+jdo/wCuQXOo1ROADd3NFlgQWx
# z1xOv/LiAmQiUeeiP+nlA8gWCdW93PErU07og1p1+N2D1sBO6oG5QDlT/tTFuEGd
# IL21jG2xWkEemd3PSN2pHKrytpS0e4S0cNZIKgTUTKdv+Mb2ZEiQi7K4zUTjcmjz
# nlsSjTXdyKBmoiqNGhITWfbR2IUWjtCpzUO44ceqXd5HDpvfGhpKI7Uwun1W2xNU
# yw1XrAFd64Qhd/lvc28G1DLfDdtRIoaRGxgLzQbU6621s0o50Ecs6TNHseuUAKvd
# tQhOtM8IEuZ6jVw8nswCPIcJyjbeY29kjI4WmD2weF1fZbDey6Emlrf+dkJUIuCb
# TximyTXw3rb1nREUVsEQLF69BKjTjE5+ETaplcTWGHCoH2+uA/5MqygalTH1Ub9W
# TwVWSUwpNvIJ3RTsT20YVowkill8piF+ECldTKzJuWjqDviiJDoMm5EFdkkcUB20
# nMyhGoiXtiQ4NYU0/B6HbHOXZkqLbhWcx9G281xJ+RRwjUyVxXD3zHGR9AoOp9ls
# EAo/2URJtGN95LJmzCtaD+oo0wRZ5+7lmnqHPPXkYUdwFm4bhe3dP4NggIrS0cXn
# 19wvBqQuPwywxIbFEu6327YtfPRcImWIlFthWnm9lUyDmbOqDKw=
# =fLCx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:59:16 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240702' of https://github.com/philmd/qemu: (22 commits)
Remove inclusion of hw/hw.h from files that don't need it
net/vmnet: Drop ifdef for macOS versions older than 12.0
block/file-posix: Drop ifdef for macOS versions older than 12.0
audio: Drop ifdef for macOS versions older than 12.0
hvf: Drop ifdef for macOS versions older than 12.0
hw/ide/macio: switch from using qemu_allocate_irq() to qdev input GPIOs
system/physmem: Fix reference to dump-guest-core
docs: document special exception for machine type deprecation & removal
hw/i386: remove obsolete manual deprecation reason string of i440fx machines
hw/ppc: remove obsolete manual deprecation reason string of spapr machines
hw: skip registration of outdated versioned machine types
hw: set deprecation info for all versioned machine types
include/hw: temporarily disable deletion of versioned machine types
include/hw: add macros for deprecation & removal of versioned machines
hw/i386: convert 'q35' machine definitions to use new macros
hw/i386: convert 'i440fx' machine definitions to use new macros
hw/m68k: convert 'virt' machine definitions to use new macros
hw/ppc: convert 'spapr' machine definitions to use new macros
hw/s390x: convert 'ccw' machine definitions to use new macros
hw/arm: convert 'virt' machine definitions to use new macros
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
hw/hw.h only contains the prototype of hw_error() nowadays, so
files that don't use this function don't need to include this
header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240701132649.58345-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This prevents the IRQs from being leaked when the macio IDE device is used.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240628160334.653168-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Shutdown requests are normally hardware dependent.
By extending pvpanic to also handle shutdown requests, guests can
submit such requests with an easily implementable and cross-platform
mechanism.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-5-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The different components of pvpanic duplicate the list of supported
events. Move it to the shared header file to minimize changes when new
events are added.
MST: tweak: keep header included in pvpanic.c to avoid header
dependency, rebase.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-3-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AST2700 have two SCU controllers which are SCU and SCUIO.
Both SCU and SCUIO registers are not compatible previous SOCs
, introduces new registers and adds ast2700 scu, sucio class init handler.
The pclk divider selection of SCUIO is defined in SCUIO280[20:18] and
the pclk divider selection of SCU is defined in SCU280[25:23].
Both of them are not compatible AST2600 SOCs, adds a get_apb_freq function
and trace-event for AST2700 SCU and SCUIO.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[clg: Fixed spelling : Unhandeled -> Unhandled ]
The SDRAM memory controller(DRAMC) controls the access to external
DDR4 and DDR5 SDRAM and power up to DDR4 and DDR5 PHY.
The DRAM memory controller of AST2700 is not backward compatible
to previous chips such AST2600, AST2500 and AST2400.
Max memory is now 8GiB on the AST2700. Introduce new
aspeed_2700_sdmc and class with read/write operation and
reset handlers.
Define DRAMC necessary protected registers and
unprotected registers for AST2700 and increase
the register set to 0x1000.
Add unlocked property to change controller protected status.
Incrementing the version of vmstate to 2.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 SLI engine is designed to accelerate the
throughput between cross-die connections.
It have CPU_SLI at CPU die and IO_SLI at IO die.
Introduce dummy AST2700 SLI and SLIIO models.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instantiate the whole clock tree and using the Clock multiplexers and
the PLLs defined in the previous commits. This allows to statically
define the clock tree and easily follow the clock signal from one end to
another.
Also handle three-phase reset now that we have defined a known base
state for every object.
(Reset handling based on hw/misc/zynq_sclr.c)
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-5-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This object represents the PLLs and their channels. The PLLs allow for a
more fine-grained control of the clocks frequency.
The migration handling is based on hw/misc/zynq_sclr.c.
Three phase reset will be handled in a later commit.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-4-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This object is used to represent every multiplexer in the clock tree as
well as every clock output, every presecaler, frequency multiplier, etc.
This allows to use a generic approach for every component of the clock tree
(except the PLLs).
The migration handling is based on hw/misc/zynq_sclr.c.
Three phase reset will be handled in a later commit.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240303140643.81957-3-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add the necessary files to add a simple RCC implementation with just
reads from and writes to registers. Also instantiate the RCC in the
STM32L4x5_SoC. It is needed for accurate emulation of all the SoC
clocks and timers.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove last two includes of hw/ide/intarnal.h outside of hw/ide and
replace them with newly added public header to allow moving internal.h
into hw/ide to really stop exposing it.
Fixes: a11f439a0e (hw/ide: Stop exposing internal.h to non-IDE files)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240223142633.933694E6004@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Specs are available here:
https://www.nxp.com/docs/en/data-sheet/PCA9554_9554A.pdf
This is a simple model supporting the basic registers for GPIO
mode. The device also supports an interrupt output line but the
model does not yet support this.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Allow external devices to drive pca9552 input pins by adding
input GPIO's to the model. This allows a device to connect
its output GPIO's to the pca9552 input GPIO's.
In order for an external device to set the state of a pca9552
pin, the pin must first be configured for high impedance (LED
is off). If the pca9552 pin is configured to drive the pin low
(LED is on), then external input will be ignored.
Here is a table describing the logical state of a pca9552 pin
given the state being driven by the pca9552 and an external device:
PCA9552
Configured
State
| Hi-Z | Low |
------+------+-----+
External Hi-Z | Hi | Low |
Device ------+------+-----+
State Low | Low | Low |
------+------+-----+
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This field is not set. Remove it along with the dead
code it was guarding.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-7-philmd@linaro.org>
Since previous commit the MIPSITUState::cpu0 field is not
used anymore. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-6-philmd@linaro.org>
Previous commit removed the MT*C0(SAAR) helpers which
were the only calls to itc_reconfigure() out of hw/,
we can reduce its scope and declare it statically.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-3-philmd@linaro.org>
The MPS2 SCC device is broadly the same for all FPGA images, but has
minor differences in the behaviour of the CFG registers depending on
the image. In many cases we don't really care about the functionality
controlled by these registers and a reads-as-written or similar
behaviour is sufficient for the moment.
For the AN536 the required behaviour is:
* A_CFG0 has CPU reset and halt bits
- implement as reads-as-written for the moment
* A_CFG1 has flash or ATCM address 0 remap handling
- QEMU doesn't model this; implement as reads-as-written
* A_CFG2 has QSPI select (like AN524)
- implemented (no behaviour, as with AN524)
* A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits"
- QEMU doesn't care about these, so use the existing
RAZ behaviour for convenience
* A_CFG4 is board rev (like all other images)
- no change needed
* A_CFG5 is ACLK frq in hz (like AN524)
- implemented as reads-as-written, as for other boards
* A_CFG6 is core 0 vector table base address
- implemented as reads-as-written for the moment
* A_CFG7 is core 1 vector table base address
- implemented as reads-as-written for the moment
Make the changes necessary for this; leave TODO comments where
appropriate to indicate where we might want to come back and
implement things like CPU reset.
The other aspects of the device specific to this FPGA image (like the
values of the board ID and similar registers) will be set via the
device's qdev properties.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-8-peter.maydell@linaro.org
Linux writes zeroes at bootup into the default ports for LASI audio and
LASI floppy controller to reset those devices. Allow writing to those
registers to avoid HPMCs.
Signed-off-by: Helge Deller <deller@gmx.de>
"target/arm/cpu.h" is target specific, any file including it
becomes target specific too, thus this is the same for any file
including "hw/misc/xlnx-versal-crl.h".
"hw/misc/xlnx-versal-crl.h" doesn't require any target specific
definition however, only the target-agnostic QOM definitions
from "target/arm/cpu-qom.h". Include the latter header to avoid
tainting unnecessary objects as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-14-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although very similar to the STM32F4xx EXTI, STM32L4x5 EXTI generates
more than 32 event/interrupt requests and thus uses more registers
than STM32F4xx EXTI which generates 23 event/interrupt requests.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240109160658.311932-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
-----BEGIN PGP SIGNATURE-----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=TA1/
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu into staging
* Add compat machines for QEMU 9.0
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWCtYsRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWLnw//cNJrxG0V+j0iakX+C7HRumVrLBDI4KYY
# Cp2Hx92SyeQ0Kk8DJS6JueTV0SLjMsV77APu2YPH7ELmPlk+CB9gqmV7xVoYNvsm
# QbRPlIjFw8MHLekadc2A+C+pn48tWACoOdBEDIfazKrxybnf0B57RC/fIfMKHjbs
# 2ALCoFbbgphs7yWuzTHK8ayKaGMhUVkWfzHQwpnq899olHyZBhkl951uKJA6VmLx
# KvggePkpszLjmmXA8MH1hDCcizki31cB0ZKTbQFCyE42s2S3Hvg0GueU90O7Y1cj
# lS5tPVQxyEhUYMLL+/hudlf2OYqVn2BalB7ieUQIy6rG8yoc9zxfIKQi0ccl+2oA
# s8HRq5S0bSjtilQogU1LQL/Gk6W1/N9MmnhKvCGB+BTK5KX7s4EQk02y9gGZm/8s
# pMErMyaXTG4dLiTAK42VgMVDqCYvzBmE+Gj91OmoUR7fb+VMrsWxeBFxMPDn+VtL
# TMJegIFsjw2QCSitcU4v+nP0qtKgXGbuZtrGXKabrxH5PmeQFJDSM7TwpTK4qvjK
# QMIQKBbz8BfJnUzN8qAaaJEpp1T5tcMJClKtfcgxq/+VyaSaHLmD0cljqBC+g+y7
# FTo+fa7oYx44sAlqapdEXBSGn4T+J26iuCef13CCCiPfYBv/tk3b2E0AWHj4y58I
# +VpInjUaPBQ=
# =TA1/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Dec 2023 04:36:11 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu:
tests/unit/test-qmp-event: Replace fixture by global variables
tests/unit/test-qmp-event: Simplify event emission check
tests/unit/test-qmp-event: Drop superfluous mutex
tests/qtest/npcm7xx_pwm-test: Only do full testing in slow mode
qemu-options: Clarify handling of commas in options parameters
tests/qtest/migration-test: Fix analyze-migration.py for s390x
qom/object: Limit type names to alphanumerical and some few special characters
tests/unit/test-io-task: Rename "qemu:dummy" to avoid colon in the name
memory: Remove "qemu:" prefix from the "qemu:ram-discard-manager" type name
hw: Replace anti-social QOM type names (again)
docs/system/arm: Fix for rename of type "xlnx.bbram-ctrl"
target: Restrict 'sysemu/reset.h' to system emulation
hw/s390x/ipl: Remove unused 'exec/exec-all.h' included header
hw/misc/mips_itu: Remove unnecessary 'exec/exec-all.h' header
hw/ppc/spapr_hcall: Remove unused 'exec/exec-all.h' included header
system/qtest: Restrict QTest API to system emulation
system/qtest: Include missing 'hw/core/cpu.h' header
MAINTAINERS: Add some more vmware-related files to the corresponding section
hw: Add compat machines for 9.0
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QOM type names containing ',' result in awful UI. We got rid of them
in v6.0.0 (commit e178113ff6 hw: Replace anti-social QOM type names).
A few have crept back since:
xlnx,cframe-reg
xlnx,efuse
xlnx,pmc-efuse-cache
xlnx,versal-cfu-apb
xlnx,versal-cfu-fdro
xlnx,versal-cfu-sfr
xlnx,versal-crl
xlnx,versal-efuse
xlnx,zynqmp-efuse
These are all device types. They can't be plugged with -device /
device_add, except for "xlnx,efuse" (I'm not sure that one is
intentional).
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-aarch64 -device xlnx,,pmc-efuse-cache,help
They can also be used with -global, where you must *not* double the
comma:
$ qemu-system-aarch64 -global xlnx,efuse.drive-index=2
Trap for the unwary.
"xlnx,efuse", "xlnx,versal-efuse", "xlnx,pmc-efuse-cache",
"xlnx-zynqmp-efuse" are from v6.2.0, "xlnx,versal-crl" is from v7.1.0,
and the remainder are new.
Rename them all to "xlnx-FOO", like commit e178113ff6 did.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-ID: <20231117114457.177308-3-thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It seems that the url changed a bit, and it triggers an error. Fix the URLs so
the documentation can be reached again.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20231124143505.1493184-3-fkonrad@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a non-cryptographic grade implementation of the
model for the True Random Number Generator (TRNG) component
in AMD/Xilinx Versal device family.
This implements all 3 modes defined by the actual hardware
specs, all of which selectable by guest software at will
at anytime:
1) PRNG mode, in which the generated sequence is required to
be reproducible after reseeded by the same 384-bit value
as supplied by guest software.
2) Test mode, in which the generated sequence is required to
be reproducible ater reseeded by the same 128-bit test
seed supplied by guest software.
3) TRNG mode, in which non-reproducible sequence is generated
based on periodic reseed by a suitable entropy source.
This model is only intended for non-real world testing of
guest software, where cryptographically strong PRNG or TRNG
is not needed.
This model supports versions 1 & 2 of the device, with
default to be version 2; the 'hw-version' uint32 property
can be set to 0x0100 to override the default.
Other implemented properties:
- 'forced-prng', uint64
When set to non-zero, mode 3's entropy source is implemented
as a deterministic sequence based on the given value and other
deterministic parameters.
This option allows the emulation to test guest software using
mode 3 and to reproduce data-dependent defects.
- 'fips-fault-events', uint32, bit-mask
bit 3: Triggers the SP800-90B entropy health test fault irq
bit 1: Triggers the FIPS 140-2 continuous test fault irq
Signed-off-by: Tong Ho <tong.ho@amd.com>
Message-id: 20231031184611.3029156-2-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- MAINTAINERS updates (Zoltan, Thomas)
- Fix cutils::get_relocated_path on Windows host (Akihiko)
- Housekeeping in Memory APIs (Marc-André)
- SDHCI fix for SDMA transfer (Lu, Jianxian)
- Various QOM/QDev/SysBus cleanups (Philippe)
- Constify QemuInputHandler structure (Philippe)
-----BEGIN PGP SIGNATURE-----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=9dZy
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20231019' of https://github.com/philmd/qemu into staging
Misc hardware patch queue
- MAINTAINERS updates (Zoltan, Thomas)
- Fix cutils::get_relocated_path on Windows host (Akihiko)
- Housekeeping in Memory APIs (Marc-André)
- SDHCI fix for SDMA transfer (Lu, Jianxian)
- Various QOM/QDev/SysBus cleanups (Philippe)
- Constify QemuInputHandler structure (Philippe)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmUxnKAACgkQ4+MsLN6t
# wN6UPw//abFZgckpxDYow4UfMu7esvkhICBvXjqDEdX2U/PBYmef049T5RVW8oDm
# NWnxRA9XydzTeToH56tU2tjXbjWKF5LcJVwrCNl6XFRdLYaR3hzejm96hX99C89J
# PB/2ineeAwidBoFfgjkvz0FLRr1ePaN74YXedPSHzywG+0dAOvpNUubbsggn3i5k
# 1wTlgfDvL6iz8NMEOSBp6cv5D4Ix0WshkqlCac0gQ74lYSM1tk/EeRiSy2IHWQQB
# 4FHd9Wo9brzLQCbhbb4FapTK0POScy0LebzRWOWfLtyWS+FRBC3kxO126I67CwMb
# XRS4YgBqC3U7IGsbzV+fWP01pVeJRzZ1vrv4vdiIYvqTdgNlmFbGjJUwEmPmrokt
# q5UreAjMUNLMEXiY6QHFq3N5I+UMY1jslcf7K/ZwDqSlqaquAe+gbnQOAMXDYgb6
# GWsBrLM2WA5E9ObbxsHdxgZqW1NxcWJpSBvjNiOV9t/jqoqpxYwHr5HAvR1xUwm+
# qRKRayRpLlX/Yad4NlvJaH5jvsMrI4bnxTYWVevLvYzc07Xo3dVxW1c+P+WCdjfM
# O3bLAvwO7Mw7GRiSNpU8zTbRJu/dS4NWDWZ24u606Cy7qD/qouz89JjkKVYYSFkX
# vNp7YOenPf4K6pak/lC3NOLIPlYmnnCLv3RCiaO6wHi4bk1yEBU=
# =9dZy
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 14:16:16 PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20231019' of https://github.com/philmd/qemu: (46 commits)
ui/input: Constify QemuInputHandler structure
hw/net: Declare link using static DEFINE_PROP_LINK() macro
hw/dma: Declare link using static DEFINE_PROP_LINK() macro
hw/scsi/virtio-scsi: Use VIRTIO_SCSI_COMMON() macro
hw/display/virtio-gpu: Use VIRTIO_DEVICE() macro
hw/block/vhost-user-blk: Use DEVICE() / VIRTIO_DEVICE() macros
hw/virtio/virtio-pmem: Replace impossible check by assertion
hw/s390x/css-bridge: Realize sysbus device before accessing it
hw/isa: Realize ISA bridge device before accessing it
hw/arm/virt: Realize ARM_GICV2M sysbus device before accessing it
hw/acpi: Realize ACPI_GED sysbus device before accessing it
hw/pci-host/bonito: Do not use SysBus API to map local MMIO region
hw/misc/allwinner-dramc: Do not use SysBus API to map local MMIO region
hw/misc/allwinner-dramc: Move sysbus_mmio_map call from init -> realize
hw/i386/intel_iommu: Do not use SysBus API to map local MMIO region
hw/i386/amd_iommu: Do not use SysBus API to map local MMIO region
hw/audio/pcspk: Inline pcspk_init()
hw/intc/spapr_xive: Do not use SysBus API to map local MMIO region
hw/intc/spapr_xive: Move sysbus_init_mmio() calls around
hw/ppc/pnv: Do not use SysBus API to map local MMIO region
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When prototyping a heterogenous machine including the ITU,
we get:
include/hw/misc/mips_itu.h:76:5: error: unknown type name 'MIPSCPU'
MIPSCPU *cpu0;
^
MIPSCPU is declared in the target specific "cpu.h" header,
but we don't want to include it, because "cpu.h" is target
specific and its inclusion taints all files including
"mips_itu.h", which become target specific too. We can
however use the 'ArchCPU *' type in the public header.
By keeping the TYPE_MIPS_CPU QOM type check in the link
property declaration, QOM core code will still check the
property is a correct MIPS CPU.
TYPE_MIPS_ITU is still built per-(MIPS)target, but its header
can now be included by other targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231009171443.12145-4-philmd@linaro.org>
We already provide "hw/misc/mips_itu.h" to declare prototype
related to MIPSITUState. Move itc_reconfigure() declaration
there.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231009171443.12145-3-philmd@linaro.org>
The file is obviously related to the raspberrypi machine, so
it should reside in hw/arm/ instead of hw/misc/. And while we're
at it, also adjust the wildcard in MAINTAINERS so that it covers
this file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231012073458.860187-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MacOS toolbox ROM calculates the number of branches that can be executed
per millisecond as part of its timer calibration. Since modern hosts are
considerably quicker than original hardware, the negative counter reaches zero
before the calibration completes leading to division by zero later in
CALCULATESLOD.
Instead of trying to fudge the timing loop (which won't work for TimeDBRA/TimeSCCDB
anyhow), use the pattern of access to the VIA1 registers to detect when SETUPTIMEK
has finished executing and write some well-known good timer values to TimeDBRA
and TimeSCCDB taken from real hardware with a suitable scaling factor.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It is needed because it defines the BIOSConfig area.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20231004083806.757242-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The djMEMC controller is used to store information related to the physical memory
configuration.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004083806.757242-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Introduce a model of Xilinx Versal's Configuration Frame broadcast
controller (CFRAME_BCAST_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-7-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame controller
(CFRAME_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20230831165701.2016397-6-francisco.iglesias@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's Single
Frame Read port (CFU_SFR).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-5-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's data out
port (CFU_FDRO).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-4-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of the software programming interface (CFU_APB) of
Xilinx Versal's Configuration Frame Unit.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-3-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the Xilinx Configuration Frame Interface (CFI) for transmitting
CFI data packets between the Xilinx Configuration Frame Unit models
(CFU_APB, CFU_FDRO and CFU_SFR), the Xilinx CFRAME controller (CFRAME_REG)
and the Xilinx CFRAME broadcast controller (CFRAME_BCAST_REG) models (when
emulating bitstream programming and readback).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20230831165701.2016397-2-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
