Use vrsub.vi to subtract from a constant.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extend comparison results from mask registers to SEW-width elements,
following recommendations in The RISC-V SPEC Volume I (Version 20240411).
This aligns with TCG's cmp_vec behavior by expanding compare results to
full element width: all 1s for true, all 0s for false.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241007025700.47259-7-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The RISC-V vector instruction set utilizes the LMUL field to group
multiple registers, enabling variable-length vector registers. This
implementation uses only the first register number of each group while
reserving the other register numbers within the group.
In TCG, each VEC_IR can have 3 types (TCG_TYPE_V64/128/256), and the
host runtime needs to adjust LMUL based on the type to use different
register groups.
This presents challenges for TCG's register allocation. Currently, we
avoid modifying the register allocation part of TCG and only expose the
minimum number of vector registers.
For example, when the host vlen is 64 bits and type is TCG_TYPE_V256, with
LMUL equal to 4, we use 4 vector registers as one register group. We can
use a maximum of 8 register groups, but the V0 register number is reserved
as a mask register, so we can effectively use at most 7 register groups.
Moreover, when type is smaller than TCG_TYPE_V256, only 7 registers are
forced to be used. This is because TCG cannot yet dynamically constrain
registers with type; likewise, when the host vlen is 128 bits and
TCG_TYPE_V256, we can use at most 15 registers.
There is not much pressure on vector register allocation in TCG now, so
using 7 registers is feasible and will not have a major impact on code
generation.
This patch:
1. Reserves vector register 0 for use as a mask register.
2. When using register groups, reserves the additional registers within
each group.
Signed-off-by: Huang Shiyuan <swung0x48@outlook.com>
Co-authored-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241007025700.47259-3-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move detection code out of tcg, similar to other hosts.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill the new argument from any condition within the opcode.
Not yet used within any backend.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define as 0 for all tcg backends.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The movcond opcode is now mandatory for backends to implement.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231026041404.1229328-7-richard.henderson@linaro.org>
The movcond opcode is now mandatory for backends to implement.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231026041404.1229328-4-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This hook may emit code at the beginning of the TB.
Suggested-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass vece to tcg_target_const_match() to allow correct interpretation of
const args of vector ops.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908022302.180442-4-c@jia.je>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20230823065335.1919380-4-mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a new opcode for negative setcond.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the separate defines with TCG_TARGET_HAS_extr_i64_i32,
so that the two parts of backend-specific type changing cannot
be out of sync.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: <20230822175127.1173698-1-richard.henderson@linaro.org>
Often, the only thing we need to know about the TCG host
is the register size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect the layout of ArchCPU from TCG compilation.
Pass the relative offset of 'env' and 'neg.tlb.f' as a parameter.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes CPUTLBEntry agnostic to the address size of the guest.
When 32-bit addresses are in effect, we can simply read the low
32 bits of the 64-bit field. Similarly when we need to update
the field for setting TLB_NOTDIRTY.
For TCG backends that could in theory be big-endian, but in
practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON
to document and ensure this is not accidentally missed.
For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway,
to document the reason for the adjustment.
For sparc64 and ppc64, always perform a 64-bit load, and rely on
the following 32-bit comparison to ignore the high bits.
Rearrange mips and ppc if ladders for clarity.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last use was removed by e77c89fb08.
Fixes: e77c89fb08 ("cputlb: Remove static tlb sizing")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement with and without Zicond. Without Zicond, we were letting
the middle-end expand to a 5 insn sequence; better to use a branch
over a single insn.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out a helper function, tcg_out_setcond_int, which does not
always produce the complete boolean result, but returns a set of
flags to do so.
Based on 21af161984, the same improvement for loongarch64.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The instruction is a combined zero-extend and add.
Use it for exactly that.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define a useful subset of the extensions. Probe for them
via compiler pre-processor feature macros and SIGILL.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest page size from TCG compilation.
While this could be done via exec/target_page.h, we want to cache
the value across multiple memory access operations, so we might
as well initialize this early.
The changes within tcg/ are entirely mechanical:
sed -i s/TARGET_PAGE_BITS/s->page_bits/g
sed -i s/TARGET_PAGE_MASK/s->page_mask/g
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts, we cannot simply rely on TCGContext.addr_bits,
as we need one or two host registers to represent the guest address.
Create the new opcodes and update all users. Since we have not
yet eliminated TARGET_LONG_BITS, only one of the two opcodes will
ever be used, so we can get away with treating them the same in
the backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add opcodes for backend support for 128-bit memory operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the unparameterized TCG_TARGET_HAS_MEMORY_BSWAP macro
with a function with a memop argument.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The system is required to emulate unaligned accesses, even if the
hardware does not support it. The resulting trap may or may not
be more efficient than the qemu slow path. There are linux kernel
patches in flight to allow userspace to query hardware support;
we can re-evaluate whether to enable this by default after that.
In the meantime, softmmu now matches useronly, where we already
assumed that unaligned accesses are supported.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of using helper_unaligned_{ld,st}, use the full load/store helpers.
This will allow the fast path to increase alignment to implement atomicity
while not immediately raising an alignment exception.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
Hoist the qemu_{ld,st}_helpers arrays to tcg.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_TMP[0-2], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
