A bad (broken or malicious) 9p client (guest) could cause QEMU host to
crash by sending a 9p 'Treaddir' request with a numeric file ID (FID) that
was previously opened for a file instead of an expected directory:
#0 0x0000762aff8f4919 in __GI___rewinddir (dirp=0xf) at
../sysdeps/unix/sysv/linux/rewinddir.c:29
#1 0x0000557b7625fb40 in do_readdir_many (pdu=0x557bb67d2eb0,
fidp=0x557bb67955b0, entries=0x762afe9fff58, offset=0, maxsize=131072,
dostat=<optimized out>) at ../hw/9pfs/codir.c:101
#2 v9fs_co_readdir_many (pdu=pdu@entry=0x557bb67d2eb0,
fidp=fidp@entry=0x557bb67955b0, entries=entries@entry=0x762afe9fff58,
offset=0, maxsize=131072, dostat=false) at ../hw/9pfs/codir.c:226
#3 0x0000557b7625c1f9 in v9fs_do_readdir (pdu=0x557bb67d2eb0,
fidp=0x557bb67955b0, offset=<optimized out>,
max_count=<optimized out>) at ../hw/9pfs/9p.c:2488
#4 v9fs_readdir (opaque=0x557bb67d2eb0) at ../hw/9pfs/9p.c:2602
That's because V9fsFidOpenState was declared as union type. So the
same memory region is used for either an open POSIX file handle (int),
or a POSIX DIR* pointer, etc., so 9p server incorrectly used the
previously opened (valid) POSIX file handle (0xf) as DIR* pointer,
eventually causing a crash in glibc's rewinddir() function.
Root cause was therefore a missing check in 9p server's 'Treaddir'
request handler, which must ensure that the client supplied FID was
really opened as directory stream before trying to access the
aforementioned union and its DIR* member.
Cc: qemu-stable@nongnu.org
Fixes: d62dbb51f7 ("virtio-9p: Add fidtype so that we can do type ...")
Reported-by: Akihiro Suda <suda.kyoto@gmail.com>
Tested-by: Akihiro Suda <suda.kyoto@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1t8GnN-002RS8-E2@kylie.crudebyte.com>
(cherry picked from commit 042b4ebfd2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If a host chooses to use the SQHD "hint" in the CQE to know if there is
room in the submission queue for additional commands, it may result in a
situation where there are not enough internal resources (struct
NvmeRequest) available to process the command. For a lack of a better
term, the host may "over-commit" the device (i.e., it may have more
inflight commands than the queue size).
For example, assume a queue with N entries. The host submits N commands
and all are picked up for processing, advancing the head and emptying
the queue. Regardless of which of these N commands complete first, the
SQHD field of that CQE will indicate to the host that the queue is
empty, which allows the host to issue N commands again. However, if the
device has not posted CQEs for all the previous commands yet, the device
will have less than N resources available to process the commands, so
queue processing is suspended.
And here lies an 11 year latent bug. In the absense of any additional
tail updates on the submission queue, we never schedule the processing
bottom-half again unless we observe a head update on an associated full
completion queue. This has been sufficient to handle N-to-1 SQ/CQ setups
(in the absense of over-commit of course). Incidentially, that "kick all
associated SQs" mechanism can now be killed since we now just schedule
queue processing when we return a processing resource to a non-empty
submission queue, which happens to cover both edge cases. However, we
must retain kicking the CQ if it was previously full.
So, apparently, no previous driver tested with hw/nvme has ever used
SQHD (e.g., neither the Linux NVMe driver or SPDK uses it). But then OSv
shows up with the driver that actually does. I salute you.
Fixes: f3c507adcd ("NVMe: Initial commit for new storage interface")
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2388
Reported-by: Waldemar Kozaczuk <jwkozaczuk@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 9529aa6bb4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
migration/savevm.c contains some calls to vmstate_save() that are
followed by migrate_set_error() if the integer return value indicates an
error. migrate_set_error() requires that the `Error *` object passed to
it is set. Therefore, vmstate_save() is assumed to always set *errp on
error.
Right now, that assumption is not met: vmstate_save_state_v() (called
internally by vmstate_save()) will not set *errp if
vmstate_subsection_save() or vmsd->post_save() fail. Fix that by adding
an *errp parameter to vmstate_subsection_save(), and by generating a
generic error in case post_save() fails (as is already done for
pre_save()).
Without this patch, qemu will crash after vmstate_subsection_save() or
post_save() have failed inside of a vmstate_save() call (unless
migrate_set_error() then happen to discard the new error because
s->error is already set). This happens e.g. when receiving the state
from a virtio-fs back-end (virtiofsd) fails.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Link: https://lore.kernel.org/r/20241015170437.310358-1-hreitz@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit 37dfcba1a0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Our implementation of the indexed version of SVE SDOT/UDOT/USDOT got
the calculation of the inner loop terminator wrong. Although we
correctly account for the element size when we calculate the
terminator for the first iteration:
intptr_t segend = MIN(16 / sizeof(TYPED), opr_sz_n);
we don't do that when we move it forward after the first inner loop
completes. The intention is that we process the vector in 128-bit
segments, which for a 64-bit element size should mean (1, 2), (3, 4),
(5, 6), etc. This bug meant that we would iterate (1, 2), (3, 4, 5,
6), (7, 8, 9, 10) etc and apply the wrong indexed element to some of
the operations, and also index off the end of the vector.
You don't see this bug if the vector length is small enough that we
don't need to iterate the outer loop, i.e. if it is only 128 bits,
or if it is the 64-bit special case from AA32/AA64 AdvSIMD. If the
vector length is 256 bits then we calculate the right results for the
elements in the vector but do index off the end of the vector. Vector
lengths greater than 256 bits see wrong answers. The instructions
that produce 32-bit results behave correctly.
Fix the recalculation of 'segend' for subsequent iterations, and
restore a version of the comment that was lost in the refactor of
commit 7020ffd656 that explains why we only need to clamp segend to
opr_sz_n for the first iteration, not the later ones.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2595
Fixes: 7020ffd656 ("target/arm: Macroize helper_gvec_{s,u}dot_idx_{b,h}")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241101185544.2130972-1-peter.maydell@linaro.org
(cherry picked from commit e6b2fa1b81)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A typo in the loop over SMT threads to set irq level for doorbells
when storing to DPDES meant everything was aimed at the CPU executing
the instruction.
Cc: qemu-stable@nongnu.org
Fixes: d24e80b2ae ("target/ppc: Add msgsnd/p and DPDES SMT support")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit 0324d236d2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
divdu (without a dot) sometimes updates cr0, even though it shouldn't.
The reason is that gen_op_arith_divd() checks Rc(ctx->opcode), which is
not initialized. This field is initialized only for instructions that
go through decode_legacy(), and not decodetree.
There already was a similar issue fixed in commit 86e6202a57
("target/ppc: Make divw[u] handler method decodetree compatible.").
It's not immediately clear what else may access the uninitialized
ctx->opcode, so instead of playing whack-a-mole and changing the check
to compute_rc0, simply initialize ctx->opcode.
Cc: qemu-stable@nongnu.org
Fixes: 99082815f1 ("target/ppc: Add infrastructure for prefixed insns")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit c9b8a13a88)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vcompress packs vl or less fields into vd, so the tail starts after the
last packed field. This could be more clearly expressed in the ISA,
but for now this thread helps to explain it:
https://github.com/riscv/riscv-v-spec/issues/796
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241030043538.939712-1-antonb@tenstorrent.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit c128d39ede)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We do not have control in the default 'riscv-aia' default value. We can
try to set it to a specific value, in this case 'auto', but there's no
guarantee that the host will accept it.
Couple with this we're always doing a 'qemu_log' to inform whether we're
ended up using the host default or if we managed to set the AIA mode to
the QEMU default we wanted to set.
Change the 'riscv-aia' description to better reflect how the option
works, and remove the two informative 'qemu_log' that are now unneeded:
if no message shows, riscv-aia was set to the default or uset-set value.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241028182037.290171-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit fd16cfb299)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When failing to set the selected AIA mode, 'aia_mode' is left untouched.
This means that 'aia_mode' will not reflect the actual AIA mode,
retrieved in 'default_aia_mode',
This is benign for now, but it will impact QMP query commands that will
expose the 'aia_mode' value, retrieving the wrong value.
Set 'aia_mode' to 'default_aia_mode' if we fail to change the AIA mode
in KVM.
While we're at it, rework the log/warning messages to be a bit less
verbose. Instead of:
KVM AIA: default mode is emul
qemu-system-riscv64: warning: KVM AIA: failed to set KVM AIA mode
We can use a single warning message:
qemu-system-riscv64: warning: KVM AIA: failed to set KVM AIA mode 'auto', using default host mode 'emul'
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241028182037.290171-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit d201a127e1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The section 4.5.2 of the RISC-V AIA specification says that any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode.
If an interrupt is asserted before the driver configs its interrupt
type to APLIC, it's pending bit will not be set except a relevant
write to a setip or setipnum register. When we write the interrupt
type to sourcecfg register, if the APLIC device doesn't check
rectified input value and update the pending bit, this interrupt
might never becomes pending.
For APLIC.m, we can manully set pending by setip or setipnum
registers in driver. But for APLIC.w, the pending status totally
depends on the rectified input value, we can't control the pending
status via mmio registers. In this case, hw should check and update
pending status for us when writing sourcecfg registers.
Update QEMU emulation to handle "pre-existing" interrupts.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241004104649.13129-1-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 2ae6cca1d3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The reads to in_clrip[x] registers return rectified input values of the
interrupt sources.
A rectified input value of an interrupt source is defined by the section
"4.5.2 Source configurations (sourcecfg[1]–sourcecfg[1023])" of the RISC-V
AIA specification as:
"rectified input value = (incoming wire value) XOR (source is inverted)"
Update the riscv_aplic_read_input_word() implementation to match the above.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 0678e9f29c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The RISC-V unprivileged specification "31.3.11. State of Vector
Extension at Reset" has a note that recommends vtype.vill be set on
reset as part of ensuring that the vector extension have a consistent
state at reset.
This change now makes QEMU consistent with Spike which sets vtype.vill
on reset.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240930165258.72258-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit f8c1f36a2e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to PLIC specification (chapter 5), there
is only one case, when interrupt is claimed. Fix
PLIC controller to match this behavior.
Signed-off-by: Sergey Makarov <s.makarov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240918140229.124329-3-s.makarov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit a84be2baa9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ensure that riscv_cpu_sxl returns MXL_RV32 when runningRV32 in an
RV64 QEMU.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Fixes: 05e6ca5e15 ("target/riscv: Ignore reserved bits in PTE for RV64")
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240919055048.562-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 929e4277c1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The register VXSAT should be RW only to the first bit.
The remaining bits should be 0.
The RISC-V Instruction Set Manual Volume I: Unprivileged Architecture
The vxsat CSR has a single read-write least-significant bit (vxsat[0])
that indicates if a fixed-point instruction has had to saturate an output
value to fit into a destination format. Bits vxsat[XLEN-1:1]
should be written as zeros.
Signed-off-by: Evgenii Prokopiev <evgenii.prokopiev@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241002084436.89347-1-evgenii.prokopiev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 5a60026cad)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Pass the stage size to step function callback, otherwise do_setm
would hang when size is larger then page size because stage size
would underflow. This fix changes do_setm to be more inline with
do_setp.
Cc: qemu-stable@nongnu.org
Fixes: 0e92818887 ("target/arm: Implement the SET* instructions")
Signed-off-by: Ido Plat <ido.plat1@ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025024909.799989-1-ido.plat1@ibm.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit bab209af35)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In regime_is_user() we assert if we're passed an ARMMMUIdx_E10_*
mmuidx value. This used to make sense because we only used this
function in ptw.c and would never use it on this kind of stage 1+2
mmuidx, only for an individual stage 1 or stage 2 mmuidx.
However, when we implemented FEAT_E0PD we added a callsite in
aa64_va_parameters(), which means this can now be called for
stage 1+2 mmuidx values if the guest sets the TCG_ELX.{E0PD0,E0PD1}
bits to enable use of the feature. This will then result in
an assertion failure later, for instance on a TLBI operation:
#6 0x00007ffff6d0e70f in g_assertion_message_expr
(domain=0x0, file=0x55555676eeba "../../target/arm/internals.h", line=978, func=0x555556771d48 <__func__.5> "regime_is_user", expr=<optimised out>)
at ../../../glib/gtestutils.c:3279
#7 0x0000555555f286d2 in regime_is_user (env=0x555557f2fe00, mmu_idx=ARMMMUIdx_E10_0) at ../../target/arm/internals.h:978
#8 0x0000555555f3e31c in aa64_va_parameters (env=0x555557f2fe00, va=18446744073709551615, mmu_idx=ARMMMUIdx_E10_0, data=true, el1_is_aa32=false)
at ../../target/arm/helper.c:12048
#9 0x0000555555f3163b in tlbi_aa64_get_range (env=0x555557f2fe00, mmuidx=ARMMMUIdx_E10_0, value=106721347371041) at ../../target/arm/helper.c:5214
#10 0x0000555555f317e8 in do_rvae_write (env=0x555557f2fe00, value=106721347371041, idxmap=21, synced=true) at ../../target/arm/helper.c:5260
#11 0x0000555555f31925 in tlbi_aa64_rvae1is_write (env=0x555557f2fe00, ri=0x555557fbeae0, value=106721347371041) at ../../target/arm/helper.c:5302
#12 0x0000555556036f8f in helper_set_cp_reg64 (env=0x555557f2fe00, rip=0x555557fbeae0, value=106721347371041) at ../../target/arm/tcg/op_helper.c:965
Since we do know whether these mmuidx values are for usermode
or not, we can easily make regime_is_user() handle them:
ARMMMUIdx_E10_0 is user, and the other two are not.
Cc: qemu-stable@nongnu.org
Fixes: e4c93e44ab ("target/arm: Implement FEAT_E0PD")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20241017172331.822587-1-peter.maydell@linaro.org
(cherry picked from commit 1505b651fd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The patch fixes the following errors generated by GCC 14.2:
../src/net/tap-win32.c:343:19: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 176 [-Werror=format-truncation=]
343 | "%s\\%s\\Connection",
| ^~
344 | NETWORK_CONNECTIONS_KEY, enum_name);
| ~~~~~~~~~
../src/net/tap-win32.c:341:9: note: 'snprintf' output between 92 and 347 bytes into a destination of size 256
341 | snprintf(connection_string,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
342 | sizeof(connection_string),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
343 | "%s\\%s\\Connection",
| ~~~~~~~~~~~~~~~~~~~~~
344 | NETWORK_CONNECTIONS_KEY, enum_name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/net/tap-win32.c:242:58: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 178 [-Werror=format-truncation=]
242 | snprintf (unit_string, sizeof(unit_string), "%s\\%s",
| ^~
243 | ADAPTER_KEY, enum_name);
| ~~~~~~~~~
../src/net/tap-win32.c:242:9: note: 'snprintf' output between 79 and 334 bytes into a destination of size 256
242 | snprintf (unit_string, sizeof(unit_string), "%s\\%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
243 | ADAPTER_KEY, enum_name);
| ~~~~~~~~~~~~~~~~~~~~~~~
../src/net/tap-win32.c:620:52: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 245 [-Werror=format-truncation=]
620 | snprintf (device_path, sizeof(device_path), "%s%s%s",
| ^~
621 | USERMODEDEVICEDIR,
622 | device_guid,
| ~~~~~~~~~~~
../src/net/tap-win32.c:620:5: note: 'snprintf' output between 16 and 271 bytes into a destination of size 256
620 | snprintf (device_path, sizeof(device_path), "%s%s%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
621 | USERMODEDEVICEDIR,
| ~~~~~~~~~~~~~~~~~~
622 | device_guid,
| ~~~~~~~~~~~~
623 | TAPSUFFIX);
| ~~~~~~~~~~
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2607
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 75fe36b4e8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The net/af-xdp.c code is enabled when the libxdp library is present,
however, it also has direct API calls to bpf_xdp_query_id &
bpf_xdp_detach which are provided by the libbpf library.
As a result if building with --disable-libbpf, but libxdp gets
auto-detected, we'll fail to link QEMU
/usr/bin/ld: libcommon.a.p/net_af-xdp.c.o: undefined reference to symbol 'bpf_xdp_query_id@@LIBBPF_0.7.0'
There are two bugs here
* Since we have direct libbpf API calls, when building
net/af-xdp.c, we must tell meson that libbpf is a
dependancy, so that we directly link to it, rather
than relying on indirect linkage.
* When must skip probing for libxdp at all, when libbpf
is not found, raising an error if --enable-libxdp was
given explicitly.
Fixes: cb039ef3d9
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 1f37280b37)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
GitHub's CodeQL reports a critical error which is fixed by using the MIN macro:
Unsigned difference expression compared to zero
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Cc: qemu-stable@nongnu.org
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit e29bc931e1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
fix system target name, and remove --disable-system (which deactivates
system target).
Found using: make docker-test-build@debian-loongarch-cross V=1
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241020213759.2168248-1-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241023113406.1284676-10-alex.bennee@linaro.org>
(cherry picked from commit 24be5341fb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When git fails the rather terse backtrace only indicates it failed
without some useful context. Add some to make the log a little more
useful.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241023113406.1284676-11-alex.bennee@linaro.org>
(cherry picked from commit 97f116f9c6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vfio_state_pending_exact() is used to update migration core how much
device data is left for the device migration. Currently, the sum of
pre-copy and stop-copy sizes of the VFIO device are reported.
The pre-copy size is obtained via the VFIO_MIG_GET_PRECOPY_INFO ioctl,
which returns the amount of device data available to be transferred
while the device is in the PRE_COPY states.
The stop-copy size is obtained via the VFIO_DEVICE_FEATURE_MIG_DATA_SIZE
ioctl, which returns the total amount of device data left to be
transferred in order to complete the device migration.
According to the above, current implementation is wrong -- it reports
extra overlapping data because pre-copy size is already contained in
stop-copy size. Fix it by reporting only stop-copy size.
Fixes: eda7362af9 ("vfio/migration: Add VFIO migration pre-copy support")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
(cherry picked from commit 3b5948f808)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
do_setcontext() copies the target sigmask without endianness handling
and then uses target_to_host_sigset_internal(), which expects a
byte-swapped one. Use target_to_host_sigset() instead.
Fixes: bcd4933a23 ("linux-user: ppc signal handling")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241017125811.447961-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 8704132805)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If one thread modifies the mappings and another thread prints them,
a situation may occur that the printer thread sees a guest mapping
without a corresponding host mapping, leading to a crash in
open_self_maps_2().
Cc: qemu-stable@nongnu.org
Fixes: 7b7a3366e1 ("linux-user: Use walk_memory_regions for open_self_maps")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241014203441.387560-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit bbd5630a75)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix in linux-user/syscall.c due to missing v9.0.0-421-g59272469bd13
"user: Use get_task_state() helper")
The probe_access_full_mmu function was designed for this purpose,
and does not report the memory operation event to plugins.
Cc: qemu-stable@nongnu.org
Fixes: 6d03226b42 ("plugins: force slow path when plugins instrument memory ops")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241013184733.1423747-3-richard.henderson@linaro.org>
(cherry picked from commit 115ade42d5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When translating virtual to physical address with a guest CPU that
supports nested paging (NPT), we need to perform every page table walk
access indirectly through the NPT, which we correctly do.
However, we treat real mode (no page table walk) special: In that case,
we currently just skip any walks and translate VA -> PA. With NPT
enabled, we also need to then perform NPT walk to do GVA -> GPA -> HPA
which we fail to do so far.
The net result of that is that TCG VMs with NPT enabled that execute
real mode code (like SeaBIOS) end up with GPA==HPA mappings which means
the guest accesses host code and data. This typically shows as failure
to boot guests.
This patch changes the page walk logic for NPT enabled guests so that we
always perform a GVA -> GPA translation and then skip any logic that
requires an actual PTE.
That way, all remaining logic to walk the NPT stays and we successfully
walk the NPT in real mode.
Cc: qemu-stable@nongnu.org
Fixes: fe441054bb ("target-i386: Add NPT support")
Signed-off-by: Alexander Graf <graf@amazon.com>
Reported-by: Eduard Vlad <evlad@amazon.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240921085712.28902-1-graf@amazon.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit b56617bbcb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This pointer needs to be reset after overflow just like
code_buf and code_ptr.
Cc: qemu-stable@nongnu.org
Fixes: 57a269469d ("tcg: Infrastructure for managing constant pools")
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit a7cfd751fb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
s->offset and s->size are only set at the end of the function and still
contain the old values when formatting the error message. Print the
parameters with the new values that we actually checked instead.
Fixes: 500e243420 ('raw-format: Split raw_read_options()')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240829185527.47152-1-kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 04bbc3ee52)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In commit 52b10c9c0c in 2023 the QAPI MapEntry struct was
updated to add a 'compressed' field. That commit updated a number
of iotest expected-output files, but missed 211, which is vdi
specific. The result is that
./check -vdi
and more specifically
./check -vdi 211
fails because the expected and actual output don't match.
Update the reference output.
Cc: qemu-stable@nongnu.org
Fixes: 52b10c9c0c ("qemu-img: map: report compressed data blocks")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20241008164708.2966400-4-peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit d60bd080e7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Rather than waiting for the completion of migration on the source side,
wait for it on the destination QEMU side to avoid accessing the TPM TIS
memory mapped registers before QEMU could restore their state. This
error condition could be triggered on busy systems where the destination
QEMU did not have enough time to restore the TIS state while the test case
was already reading its registers. The test case was for example reading
the STS register and received an unexpected value (0xffffffff), which
lead to a segmentation fault later on due to trying to read 0xffff bytes
from the TIS into a buffer.
Cc: <qemu-stable@nongnu.org>
Reported-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
(cherry picked from commit d9280ea317)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Zhiyi reported an infinite loop issue in VFIO use case. The cause of that
was a separate discussion, however during that I found a regression of
dirty sync slowness when profiling.
Each KVMMemoryListerner maintains an array of kvm memslots. Currently it's
statically allocated to be the max supported by the kernel. However after
Linux commit 4fc096a99e ("KVM: Raise the maximum number of user memslots"),
the max supported memslots reported now grows to some number large enough
so that it may not be wise to always statically allocate with the max
reported.
What's worse, QEMU kvm code still walks all the allocated memslots entries
to do any form of lookups. It can drastically slow down all memslot
operations because each of such loop can run over 32K times on the new
kernels.
Fix this issue by making the memslots to be allocated dynamically.
Here the initial size was set to 16 because it should cover the basic VM
usages, so that the hope is the majority VM use case may not even need to
grow at all (e.g. if one starts a VM with ./qemu-system-x86_64 by default
it'll consume 9 memslots), however not too large to waste memory.
There can also be even better way to address this, but so far this is the
simplest and should be already better even than before we grow the max
supported memslots. For example, in the case of above issue when VFIO was
attached on a 32GB system, there are only ~10 memslots used. So it could
be good enough as of now.
In the above VFIO context, measurement shows that the precopy dirty sync
shrinked from ~86ms to ~3ms after this patch applied. It should also apply
to any KVM enabled VM even without VFIO.
NOTE: we don't have a FIXES tag for this patch because there's no real
commit that regressed this in QEMU. Such behavior existed for a long time,
but only start to be a problem when the kernel reports very large
nr_slots_max value. However that's pretty common now (the kernel change
was merged in 2021) so we attached cc:stable because we'll want this change
to be backported to stable branches.
Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240917163835.194664-2-peterx@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5504a81261)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in accel/kvm/kvm-all.c and accel/kvm/trace-events)
DisplaySurface may be free before the pixman image is freed, since the
image is refcounted and used by different objects, including pending
dbus messages.
Furthermore, setting the destroy function in
create_displaysurface_from() isn't appropriate, as it may not be used,
and may be overriden as in ramfb.
Set the destroy function when the shared handle is set, use the HANDLE
directly for destroy data, using a single common helper
qemu_pixman_win32_image_destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-5-marcandre.lureau@redhat.com>
(cherry picked from commit 330ef31deb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: c3f21b065a ("hw/intc/arm_gicv3_cpuif: Support vLPIs")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3db74afec3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Returning a raw areg does not preserve the value if the areg
is subsequently modified. Fixes, e.g. "jsr (sp)", where the
return address is pushed before the branch.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2483
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240813000737.228470-1-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 352cc9f300)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In tcg_out_qemu_ldst_i128, we need a non-zero index register,
which we then use as a base register in several address modes.
Since we always have TCG_REG_TMP2 available, use that.
Cc: qemu-stable@nongnu.org
Fixes: 526cd4ec01 ("tcg/ppc: Support 128-bit load/store")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2597
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-By: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 3213da7b95)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the fallback when STDBRX is not available, avoid clobbering
TCG_REG_TMP1, which might be h.base, which is still in use.
Use TCG_REG_TMP2 instead.
Cc: qemu-stable@nongnu.org
Fixes: 01a112e2e9 ("tcg/ppc: Reorg tcg_out_tlb_read")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-By: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 4cabcb89b1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Comparing a string of 4 bytes only works in little-endian.
Adjust bulk bswap to only apply to the note payload.
Perform swapping of the note header manually; the magic
is defined so that it does not need a runtime swap.
Fixes: 83f990eb5a ("linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2596
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 2884596f5f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
load_flt_binary() calls load_flat_file() -> page_set_flags().
page_set_flags() must be called with the mmap_lock held,
otherwise it aborts:
$ qemu-arm -L stm32/lib/ stm32/bin/busybox
qemu-arm: ../accel/tcg/user-exec.c:505: page_set_flags: Assertion `have_mmap_lock()' failed.
Aborted (core dumped)
Fix by taking the lock in load_flt_binary().
Fixes: fbd3c4cff6 ("linux-user/arm: Mark the commpage executable")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2525
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240822095045.72643-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit a9ee641bd4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mips64el cross setup is very broken for bullseye which has now
entered LTS support so is unlikely to be fixed. While we still can't
build the container with all packages for bookworm due to a single
missing dependency that will hopefully get fixed in due course. For
the sake of keeping the CI green we disable the problematic packages
via the lcitool's mappings.yml file.
See also: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1081535
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Disable the problematic packages via lcitool's mappings.yml]
Message-ID: <20241002080333.127172-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit c60473d292)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix in tests/docker/dockerfiles/debian-mips64el-cross.docker)
When we are building for OSS-Fuzz, we want to ensure that the fuzzer
targets are actually created, regardless of leaks. Leaks will be
detected by the subsequent tests of the individual fuzz-targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240527150001.325565-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 3e964275d6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target_ulong is typedef'ed as a 32-bit integer when building the
qemu-system-arm target, and this is smaller than the size of an
intermediate physical address when LPAE is being used.
Given that Linux may place leaf level user page tables in high memory
when built for LPAE, the kernel will crash with an external abort as
soon as it enters user space when running with more than ~3 GiB of
system RAM.
So replace target_ulong with vaddr in places where it may carry an
address value that is not representable in 32 bits.
Fixes: f3639a64f6 ("target/arm: Use softmmu tlbs for page table walking")
Cc: qemu-stable@nongnu.org
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240927071051.1444768-1-ardb+git@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 67d762e716)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow overlapping request by removing the assert that made it
impossible. There are only two callers:
1. block_copy_task_create()
It already asserts the very same condition before calling
reqlist_init_req().
2. cbw_snapshot_read_lock()
There is no need to have read requests be non-overlapping in
copy-before-write when used for snapshot-access. In fact, there was no
protection against two callers of cbw_snapshot_read_lock() calling
reqlist_init_req() with overlapping ranges and this could lead to an
assertion failure [1].
In particular, with the reproducer script below [0], two
cbw_co_snapshot_block_status() callers could race, with the second
calling reqlist_init_req() before the first one finishes and removes
its conflicting request.
[0]:
> #!/bin/bash -e
> dd if=/dev/urandom of=/tmp/disk.raw bs=1M count=1024
> ./qemu-img create /tmp/fleecing.raw -f raw 1G
> (
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev raw,node-name=node0,file.driver=file,file.filename=/tmp/disk.raw \
> --blockdev raw,node-name=node1,file.driver=file,file.filename=/tmp/fleecing.raw \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "copy-before-write", "file": "node0", "target": "node1", "node-name": "node3" } }
> {"execute": "blockdev-add", "arguments": { "driver": "snapshot-access", "file": "node3", "node-name": "snap0" } }
> {"execute": "nbd-server-start", "arguments": {"addr": { "type": "unix", "data": { "path": "/tmp/nbd.socket" } } } }
> {"execute": "block-export-add", "arguments": {"id": "exp0", "node-name": "snap0", "type": "nbd", "name": "exp0"}}
> EOF
> ) &
> sleep 5
> while true; do
> ./qemu-nbd -d /dev/nbd0
> ./qemu-nbd -c /dev/nbd0 nbd:unix:/tmp/nbd.socket:exportname=exp0 -f raw -r
> nbdinfo --map 'nbd+unix:///exp0?socket=/tmp/nbd.socket'
> done
[1]:
> #5 0x000071e5f0088eb2 in __GI___assert_fail (...) at ./assert/assert.c:101
> #6 0x0000615285438017 in reqlist_init_req (...) at ../block/reqlist.c:23
> #7 0x00006152853e2d98 in cbw_snapshot_read_lock (...) at ../block/copy-before-write.c:237
> #8 0x00006152853e3068 in cbw_co_snapshot_block_status (...) at ../block/copy-before-write.c:304
> #9 0x00006152853f4d22 in bdrv_co_snapshot_block_status (...) at ../block/io.c:3726
> #10 0x000061528543a63e in snapshot_access_co_block_status (...) at ../block/snapshot-access.c:48
> #11 0x00006152853f1a0a in bdrv_co_do_block_status (...) at ../block/io.c:2474
> #12 0x00006152853f2016 in bdrv_co_common_block_status_above (...) at ../block/io.c:2652
> #13 0x00006152853f22cf in bdrv_co_block_status_above (...) at ../block/io.c:2732
> #14 0x00006152853d9a86 in blk_co_block_status_above (...) at ../block/block-backend.c:1473
> #15 0x000061528538da6c in blockstatus_to_extents (...) at ../nbd/server.c:2374
> #16 0x000061528538deb1 in nbd_co_send_block_status (...) at ../nbd/server.c:2481
> #17 0x000061528538f424 in nbd_handle_request (...) at ../nbd/server.c:2978
> #18 0x000061528538f906 in nbd_trip (...) at ../nbd/server.c:3121
> #19 0x00006152855a7caf in coroutine_trampoline (...) at ../util/coroutine-ucontext.c:175
Cc: qemu-stable@nongnu.org
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240712140716.517911-1-f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
(cherry picked from commit 6475155d51)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The XT check for the lxvx/stxvx instructions is currently
inverted. This was introduced during the move to decodetree.
>From the ISA:
Chapter 7. Vector-Scalar Extension Facility
Load VSX Vector Indexed X-form
lxvx XT,RA,RB
if TX=0 & MSR.VSX=0 then VSX_Unavailable()
if TX=1 & MSR.VEC=0 then Vector_Unavailable()
...
Let XT be the value 32×TX + T.
The code currently does the opposite:
if (paired || a->rt >= 32) {
REQUIRE_VSX(ctx);
} else {
REQUIRE_VECTOR(ctx);
}
This was already fixed for lxv/stxv at commit "2cc0e449d1 (target/ppc:
Fix lxv/stxv MSR facility check)", but the indexed forms were missed.
Cc: qemu-stable@nongnu.org
Fixes: 70426b5bb7 ("target/ppc: moved stxvx and lxvx from legacy to decodtree")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20240911141651.6914-1-farosas@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 8bded2e73e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The loop in the 32-bit case of the vector compare operation
was incorrectly incrementing by 8 bytes per iteration instead
of 4 bytes. This caused the function to process only half of
the intended elements.
Cc: qemu-stable@nongnu.org
Fixes: 9622c697d1 (tcg: Add gvec compare with immediate and scalar operand)
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240904142739.854-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 9d8d5a5b90)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The Neoverse-V1 TRM is a bit confused about the layout of the
ID_AA64ISAR1_EL1 register, and so its table 3-6 has the wrong value
for this ID register. Trust instead section 3.2.74's list of which
fields are set.
This means that we stop incorrectly reporting FEAT_XS as present, and
now report the presence of FEAT_BF16.
Cc: qemu-stable@nongnu.org
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240917161337.3012188-1-peter.maydell@linaro.org
(cherry picked from commit 8676007eff)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The follow-up transactions may use the data in the attribution, so keep
the value of attribution from the function parameter just as
flatview_translate() above.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Cc: qemu-stable@nongnu.org
Fixes: f26404fbee ("Make address_space_map() take a MemTxAttrs argument")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240912070404.2993976-2-fea.wang@sifive.com
Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit d8d5ca4004)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix due to lack of
v9.1.0-134-g637b0aa13956 "softmmu: Support concurrent bounce buffers"
v9.0.0-564-g69e78f1b3484 "system/physmem: Per-AddressSpace bounce buffering")
