qemu/target/riscv/cpu.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

2231 lines
69 KiB
C
Raw Normal View History

/*
* QEMU RISC-V CPU
*
* Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
* Copyright (c) 2017-2018 SiFive, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu/qemu-print.h"
#include "qemu/ctype.h"
#include "qemu/log.h"
#include "cpu.h"
#include "cpu_vendorid.h"
#include "pmu.h"
#include "internals.h"
#include "time_helper.h"
#include "exec/exec-all.h"
#include "qapi/error.h"
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
#include "qapi/visitor.h"
#include "qemu/error-report.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "fpu/softfloat-helpers.h"
#include "sysemu/kvm.h"
target/riscv: skip features setup for KVM CPUs As it is today it's not possible to use '-cpu host' if the RISC-V host has RVH enabled. This is the resulting error: $ ./qemu/build/qemu-system-riscv64 \ -machine virt,accel=kvm -m 2G -smp 1 \ -nographic -snapshot -kernel ./guest_imgs/Image \ -initrd ./guest_imgs/rootfs_kvm_riscv64.img \ -append "earlycon=sbi root=/dev/ram rw" \ -cpu host qemu-system-riscv64: H extension requires priv spec 1.12.0 This happens because we're checking for priv spec for all CPUs, and since we're not setting env->priv_ver for the 'host' CPU, it's being default to zero (i.e. PRIV_SPEC_1_10_0). In reality env->priv_ver does not make sense when running with the KVM 'host' CPU. It's used to gate certain CSRs/extensions during translation to make them unavailable if the hart declares an older spec version. It doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs are available [1]. 'priv_ver' is just one example. We're doing a lot of feature validation and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs. Validating the feature set for those CPUs is a KVM problem that should be handled in KVM specific code. The new riscv_cpu_realize_tcg() helper contains all validation logic that are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're running TCG and, if it's the case, proceed with the usual TCG realize() logic. [1] lib/sbi/sbi_hart.c, hart_detect_features() Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-06 13:17:19 +03:00
#include "sysemu/tcg.h"
#include "kvm_riscv.h"
#include "tcg/tcg.h"
/* RISC-V CPU definitions */
static const char riscv_single_letter_exts[] = "IEMAFDQCPVH";
struct isa_ext_data {
const char *name;
int min_version;
int ext_enable_offset;
};
#define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \
{#_name, _min_ver, offsetof(struct RISCVCPUConfig, _prop)}
/*
* From vector_helper.c
* Note that vector data is stored in host-endian 64-bit chunks,
* so addressing bytes needs a host-endian fixup.
*/
#if HOST_BIG_ENDIAN
#define BYTE(x) ((x) ^ 7)
#else
#define BYTE(x) (x)
#endif
/*
* Here are the ordering rules of extension naming defined by RISC-V
* specification :
* 1. All extensions should be separated from other multi-letter extensions
* by an underscore.
* 2. The first letter following the 'Z' conventionally indicates the most
* closely related alphabetical extension category, IMAFDQLCBKJTPVH.
* If multiple 'Z' extensions are named, they should be ordered first
* by category, then alphabetically within a category.
* 3. Standard supervisor-level extensions (starts with 'S') should be
* listed after standard unprivileged extensions. If multiple
* supervisor-level extensions are listed, they should be ordered
* alphabetically.
* 4. Non-standard extensions (starts with 'X') must be listed after all
* standard extensions. They must be separated from other multi-letter
* extensions by an underscore.
*
* Single letter extensions are checked in riscv_cpu_validate_misa_priv()
* instead.
*/
static const struct isa_ext_data isa_edata_arr[] = {
ISA_EXT_DATA_ENTRY(zicbom, PRIV_VERSION_1_12_0, ext_icbom),
ISA_EXT_DATA_ENTRY(zicboz, PRIV_VERSION_1_12_0, ext_icboz),
ISA_EXT_DATA_ENTRY(zicond, PRIV_VERSION_1_12_0, ext_zicond),
ISA_EXT_DATA_ENTRY(zicsr, PRIV_VERSION_1_10_0, ext_icsr),
ISA_EXT_DATA_ENTRY(zifencei, PRIV_VERSION_1_10_0, ext_ifencei),
ISA_EXT_DATA_ENTRY(zihintpause, PRIV_VERSION_1_10_0, ext_zihintpause),
ISA_EXT_DATA_ENTRY(zawrs, PRIV_VERSION_1_12_0, ext_zawrs),
ISA_EXT_DATA_ENTRY(zfbfmin, PRIV_VERSION_1_12_0, ext_zfbfmin),
ISA_EXT_DATA_ENTRY(zfh, PRIV_VERSION_1_11_0, ext_zfh),
ISA_EXT_DATA_ENTRY(zfhmin, PRIV_VERSION_1_11_0, ext_zfhmin),
ISA_EXT_DATA_ENTRY(zfinx, PRIV_VERSION_1_12_0, ext_zfinx),
ISA_EXT_DATA_ENTRY(zdinx, PRIV_VERSION_1_12_0, ext_zdinx),
ISA_EXT_DATA_ENTRY(zca, PRIV_VERSION_1_12_0, ext_zca),
ISA_EXT_DATA_ENTRY(zcb, PRIV_VERSION_1_12_0, ext_zcb),
ISA_EXT_DATA_ENTRY(zcf, PRIV_VERSION_1_12_0, ext_zcf),
ISA_EXT_DATA_ENTRY(zcd, PRIV_VERSION_1_12_0, ext_zcd),
ISA_EXT_DATA_ENTRY(zce, PRIV_VERSION_1_12_0, ext_zce),
ISA_EXT_DATA_ENTRY(zcmp, PRIV_VERSION_1_12_0, ext_zcmp),
ISA_EXT_DATA_ENTRY(zcmt, PRIV_VERSION_1_12_0, ext_zcmt),
ISA_EXT_DATA_ENTRY(zba, PRIV_VERSION_1_12_0, ext_zba),
ISA_EXT_DATA_ENTRY(zbb, PRIV_VERSION_1_12_0, ext_zbb),
ISA_EXT_DATA_ENTRY(zbc, PRIV_VERSION_1_12_0, ext_zbc),
ISA_EXT_DATA_ENTRY(zbkb, PRIV_VERSION_1_12_0, ext_zbkb),
ISA_EXT_DATA_ENTRY(zbkc, PRIV_VERSION_1_12_0, ext_zbkc),
ISA_EXT_DATA_ENTRY(zbkx, PRIV_VERSION_1_12_0, ext_zbkx),
ISA_EXT_DATA_ENTRY(zbs, PRIV_VERSION_1_12_0, ext_zbs),
ISA_EXT_DATA_ENTRY(zk, PRIV_VERSION_1_12_0, ext_zk),
ISA_EXT_DATA_ENTRY(zkn, PRIV_VERSION_1_12_0, ext_zkn),
ISA_EXT_DATA_ENTRY(zknd, PRIV_VERSION_1_12_0, ext_zknd),
ISA_EXT_DATA_ENTRY(zkne, PRIV_VERSION_1_12_0, ext_zkne),
ISA_EXT_DATA_ENTRY(zknh, PRIV_VERSION_1_12_0, ext_zknh),
ISA_EXT_DATA_ENTRY(zkr, PRIV_VERSION_1_12_0, ext_zkr),
ISA_EXT_DATA_ENTRY(zks, PRIV_VERSION_1_12_0, ext_zks),
ISA_EXT_DATA_ENTRY(zksed, PRIV_VERSION_1_12_0, ext_zksed),
ISA_EXT_DATA_ENTRY(zksh, PRIV_VERSION_1_12_0, ext_zksh),
ISA_EXT_DATA_ENTRY(zkt, PRIV_VERSION_1_12_0, ext_zkt),
ISA_EXT_DATA_ENTRY(zve32f, PRIV_VERSION_1_10_0, ext_zve32f),
ISA_EXT_DATA_ENTRY(zve64f, PRIV_VERSION_1_10_0, ext_zve64f),
ISA_EXT_DATA_ENTRY(zve64d, PRIV_VERSION_1_10_0, ext_zve64d),
ISA_EXT_DATA_ENTRY(zvfbfmin, PRIV_VERSION_1_12_0, ext_zvfbfmin),
ISA_EXT_DATA_ENTRY(zvfbfwma, PRIV_VERSION_1_12_0, ext_zvfbfwma),
ISA_EXT_DATA_ENTRY(zvfh, PRIV_VERSION_1_12_0, ext_zvfh),
ISA_EXT_DATA_ENTRY(zvfhmin, PRIV_VERSION_1_12_0, ext_zvfhmin),
ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx),
ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin),
ISA_EXT_DATA_ENTRY(smaia, PRIV_VERSION_1_12_0, ext_smaia),
ISA_EXT_DATA_ENTRY(smstateen, PRIV_VERSION_1_12_0, ext_smstateen),
ISA_EXT_DATA_ENTRY(ssaia, PRIV_VERSION_1_12_0, ext_ssaia),
ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf),
ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc),
ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu),
ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval),
ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot),
ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt),
ISA_EXT_DATA_ENTRY(xtheadba, PRIV_VERSION_1_11_0, ext_xtheadba),
ISA_EXT_DATA_ENTRY(xtheadbb, PRIV_VERSION_1_11_0, ext_xtheadbb),
ISA_EXT_DATA_ENTRY(xtheadbs, PRIV_VERSION_1_11_0, ext_xtheadbs),
ISA_EXT_DATA_ENTRY(xtheadcmo, PRIV_VERSION_1_11_0, ext_xtheadcmo),
ISA_EXT_DATA_ENTRY(xtheadcondmov, PRIV_VERSION_1_11_0, ext_xtheadcondmov),
ISA_EXT_DATA_ENTRY(xtheadfmemidx, PRIV_VERSION_1_11_0, ext_xtheadfmemidx),
ISA_EXT_DATA_ENTRY(xtheadfmv, PRIV_VERSION_1_11_0, ext_xtheadfmv),
ISA_EXT_DATA_ENTRY(xtheadmac, PRIV_VERSION_1_11_0, ext_xtheadmac),
ISA_EXT_DATA_ENTRY(xtheadmemidx, PRIV_VERSION_1_11_0, ext_xtheadmemidx),
ISA_EXT_DATA_ENTRY(xtheadmempair, PRIV_VERSION_1_11_0, ext_xtheadmempair),
ISA_EXT_DATA_ENTRY(xtheadsync, PRIV_VERSION_1_11_0, ext_xtheadsync),
ISA_EXT_DATA_ENTRY(xventanacondops, PRIV_VERSION_1_12_0, ext_XVentanaCondOps),
};
static bool isa_ext_is_enabled(RISCVCPU *cpu,
const struct isa_ext_data *edata)
{
bool *ext_enabled = (void *)&cpu->cfg + edata->ext_enable_offset;
return *ext_enabled;
}
static void isa_ext_update_enabled(RISCVCPU *cpu,
const struct isa_ext_data *edata, bool en)
{
bool *ext_enabled = (void *)&cpu->cfg + edata->ext_enable_offset;
*ext_enabled = en;
}
const char * const riscv_int_regnames[] = {
"x0/zero", "x1/ra", "x2/sp", "x3/gp", "x4/tp", "x5/t0", "x6/t1",
"x7/t2", "x8/s0", "x9/s1", "x10/a0", "x11/a1", "x12/a2", "x13/a3",
"x14/a4", "x15/a5", "x16/a6", "x17/a7", "x18/s2", "x19/s3", "x20/s4",
"x21/s5", "x22/s6", "x23/s7", "x24/s8", "x25/s9", "x26/s10", "x27/s11",
"x28/t3", "x29/t4", "x30/t5", "x31/t6"
};
const char * const riscv_int_regnamesh[] = {
"x0h/zeroh", "x1h/rah", "x2h/sph", "x3h/gph", "x4h/tph", "x5h/t0h",
"x6h/t1h", "x7h/t2h", "x8h/s0h", "x9h/s1h", "x10h/a0h", "x11h/a1h",
"x12h/a2h", "x13h/a3h", "x14h/a4h", "x15h/a5h", "x16h/a6h", "x17h/a7h",
"x18h/s2h", "x19h/s3h", "x20h/s4h", "x21h/s5h", "x22h/s6h", "x23h/s7h",
"x24h/s8h", "x25h/s9h", "x26h/s10h", "x27h/s11h", "x28h/t3h", "x29h/t4h",
"x30h/t5h", "x31h/t6h"
};
const char * const riscv_fpr_regnames[] = {
"f0/ft0", "f1/ft1", "f2/ft2", "f3/ft3", "f4/ft4", "f5/ft5",
"f6/ft6", "f7/ft7", "f8/fs0", "f9/fs1", "f10/fa0", "f11/fa1",
"f12/fa2", "f13/fa3", "f14/fa4", "f15/fa5", "f16/fa6", "f17/fa7",
"f18/fs2", "f19/fs3", "f20/fs4", "f21/fs5", "f22/fs6", "f23/fs7",
"f24/fs8", "f25/fs9", "f26/fs10", "f27/fs11", "f28/ft8", "f29/ft9",
"f30/ft10", "f31/ft11"
};
const char * const riscv_rvv_regnames[] = {
"v0", "v1", "v2", "v3", "v4", "v5", "v6",
"v7", "v8", "v9", "v10", "v11", "v12", "v13",
"v14", "v15", "v16", "v17", "v18", "v19", "v20",
"v21", "v22", "v23", "v24", "v25", "v26", "v27",
"v28", "v29", "v30", "v31"
};
static const char * const riscv_excp_names[] = {
"misaligned_fetch",
"fault_fetch",
"illegal_instruction",
"breakpoint",
"misaligned_load",
"fault_load",
"misaligned_store",
"fault_store",
"user_ecall",
"supervisor_ecall",
"hypervisor_ecall",
"machine_ecall",
"exec_page_fault",
"load_page_fault",
"reserved",
"store_page_fault",
"reserved",
"reserved",
"reserved",
"reserved",
"guest_exec_page_fault",
"guest_load_page_fault",
"reserved",
"guest_store_page_fault",
};
static const char * const riscv_intr_names[] = {
"u_software",
"s_software",
"vs_software",
"m_software",
"u_timer",
"s_timer",
"vs_timer",
"m_timer",
"u_external",
"s_external",
"vs_external",
"m_external",
"reserved",
"reserved",
"reserved",
"reserved"
};
static void riscv_cpu_add_user_properties(Object *obj);
const char *riscv_cpu_get_trap_name(target_ulong cause, bool async)
{
if (async) {
return (cause < ARRAY_SIZE(riscv_intr_names)) ?
riscv_intr_names[cause] : "(unknown)";
} else {
return (cause < ARRAY_SIZE(riscv_excp_names)) ?
riscv_excp_names[cause] : "(unknown)";
}
}
static void set_misa(CPURISCVState *env, RISCVMXL mxl, uint32_t ext)
{
env->misa_mxl_max = env->misa_mxl = mxl;
env->misa_ext_mask = env->misa_ext = ext;
}
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
#ifndef CONFIG_USER_ONLY
static uint8_t satp_mode_from_str(const char *satp_mode_str)
{
if (!strncmp(satp_mode_str, "mbare", 5)) {
return VM_1_10_MBARE;
}
if (!strncmp(satp_mode_str, "sv32", 4)) {
return VM_1_10_SV32;
}
if (!strncmp(satp_mode_str, "sv39", 4)) {
return VM_1_10_SV39;
}
if (!strncmp(satp_mode_str, "sv48", 4)) {
return VM_1_10_SV48;
}
if (!strncmp(satp_mode_str, "sv57", 4)) {
return VM_1_10_SV57;
}
if (!strncmp(satp_mode_str, "sv64", 4)) {
return VM_1_10_SV64;
}
g_assert_not_reached();
}
uint8_t satp_mode_max_from_map(uint32_t map)
{
/* map here has at least one bit set, so no problem with clz */
return 31 - __builtin_clz(map);
}
const char *satp_mode_str(uint8_t satp_mode, bool is_32_bit)
{
if (is_32_bit) {
switch (satp_mode) {
case VM_1_10_SV32:
return "sv32";
case VM_1_10_MBARE:
return "none";
}
} else {
switch (satp_mode) {
case VM_1_10_SV64:
return "sv64";
case VM_1_10_SV57:
return "sv57";
case VM_1_10_SV48:
return "sv48";
case VM_1_10_SV39:
return "sv39";
case VM_1_10_MBARE:
return "none";
}
}
g_assert_not_reached();
}
static void set_satp_mode_max_supported(RISCVCPU *cpu,
uint8_t satp_mode)
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
{
bool rv32 = riscv_cpu_mxl(&cpu->env) == MXL_RV32;
const bool *valid_vm = rv32 ? valid_vm_1_10_32 : valid_vm_1_10_64;
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
for (int i = 0; i <= satp_mode; ++i) {
if (valid_vm[i]) {
cpu->cfg.satp_mode.supported |= (1 << i);
}
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
}
}
/* Set the satp mode to the max supported */
static void set_satp_mode_default_map(RISCVCPU *cpu)
{
cpu->cfg.satp_mode.map = cpu->cfg.satp_mode.supported;
}
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
#endif
static void riscv_any_cpu_init(Object *obj)
{
RISCVCPU *cpu = RISCV_CPU(obj);
CPURISCVState *env = &cpu->env;
#if defined(TARGET_RISCV32)
set_misa(env, MXL_RV32, RVI | RVM | RVA | RVF | RVD | RVC | RVU);
#elif defined(TARGET_RISCV64)
set_misa(env, MXL_RV64, RVI | RVM | RVA | RVF | RVD | RVC | RVU);
#endif
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(RISCV_CPU(obj),
riscv_cpu_mxl(&RISCV_CPU(obj)->env) == MXL_RV32 ?
VM_1_10_SV32 : VM_1_10_SV57);
#endif
env->priv_ver = PRIV_VERSION_LATEST;
/* inherited from parent obj via riscv_cpu_init() */
cpu->cfg.ext_ifencei = true;
cpu->cfg.ext_icsr = true;
cpu->cfg.mmu = true;
cpu->cfg.pmp = true;
}
#if defined(TARGET_RISCV64)
static void rv64_base_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
/* We set this in the realise function */
set_misa(env, MXL_RV64, 0);
riscv_cpu_add_user_properties(obj);
/* Set latest version of privileged specification */
env->priv_ver = PRIV_VERSION_LATEST;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(RISCV_CPU(obj), VM_1_10_SV57);
#endif
}
static void rv64_sifive_u_cpu_init(Object *obj)
{
RISCVCPU *cpu = RISCV_CPU(obj);
CPURISCVState *env = &cpu->env;
set_misa(env, MXL_RV64, RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
env->priv_ver = PRIV_VERSION_1_10_0;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(RISCV_CPU(obj), VM_1_10_SV39);
#endif
/* inherited from parent obj via riscv_cpu_init() */
cpu->cfg.ext_ifencei = true;
cpu->cfg.ext_icsr = true;
cpu->cfg.mmu = true;
cpu->cfg.pmp = true;
}
static void rv64_sifive_e_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
RISCVCPU *cpu = RISCV_CPU(obj);
set_misa(env, MXL_RV64, RVI | RVM | RVA | RVC | RVU);
env->priv_ver = PRIV_VERSION_1_10_0;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(cpu, VM_1_10_MBARE);
#endif
/* inherited from parent obj via riscv_cpu_init() */
cpu->cfg.ext_ifencei = true;
cpu->cfg.ext_icsr = true;
cpu->cfg.pmp = true;
}
static void rv64_thead_c906_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
RISCVCPU *cpu = RISCV_CPU(obj);
set_misa(env, MXL_RV64, RVG | RVC | RVS | RVU);
env->priv_ver = PRIV_VERSION_1_11_0;
cpu->cfg.ext_zfh = true;
cpu->cfg.mmu = true;
cpu->cfg.ext_xtheadba = true;
cpu->cfg.ext_xtheadbb = true;
cpu->cfg.ext_xtheadbs = true;
cpu->cfg.ext_xtheadcmo = true;
cpu->cfg.ext_xtheadcondmov = true;
cpu->cfg.ext_xtheadfmemidx = true;
cpu->cfg.ext_xtheadmac = true;
cpu->cfg.ext_xtheadmemidx = true;
cpu->cfg.ext_xtheadmempair = true;
cpu->cfg.ext_xtheadsync = true;
cpu->cfg.mvendorid = THEAD_VENDOR_ID;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(cpu, VM_1_10_SV39);
#endif
/* inherited from parent obj via riscv_cpu_init() */
cpu->cfg.pmp = true;
}
static void rv64_veyron_v1_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
RISCVCPU *cpu = RISCV_CPU(obj);
set_misa(env, MXL_RV64, RVG | RVC | RVS | RVU | RVH);
env->priv_ver = PRIV_VERSION_1_12_0;
/* Enable ISA extensions */
cpu->cfg.mmu = true;
target/riscv/cpu.c: fix veyron-v1 CPU properties Commit 7f0bdfb5bfc2 ("target/riscv/cpu.c: remove cfg setup from riscv_cpu_init()") removed code that was enabling mmu, pmp, ext_ifencei and ext_icsr from riscv_cpu_init(), the init() function of TYPE_RISCV_CPU, parent type of all RISC-V CPUss. This was done to force CPUs to explictly enable all extensions and features it requires, without any 'magic values' that were inherited by the parent type. This commit failed to make appropriate changes in the 'veyron-v1' CPU, added earlier by commit e1d084a8524a. The result is that the veyron-v1 CPU has ext_ifencei, ext_icsr and pmp set to 'false', which is not the case. The reason why it took this long to notice (thanks LIU Zhiwei for reporting it) is because Linux doesn't mind 'ifencei' and 'icsr' being absent in the 'riscv,isa' DT, implying that they're both present if the 'i' extension is enabled. OpenSBI also doesn't error out or warns about the lack of 'pmp', it'll just not protect memory pages. Fix it by setting them to 'true' in rv64_veyron_v1_cpu_init() like 7f0bdfb5bfc2 already did with other CPUs. Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Fixes: 7f0bdfb5bfc2 ("target/riscv/cpu.c: remove cfg setup from riscv_cpu_init()") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230620152443.137079-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-20 18:24:43 +03:00
cpu->cfg.ext_ifencei = true;
cpu->cfg.ext_icsr = true;
cpu->cfg.pmp = true;
cpu->cfg.ext_icbom = true;
cpu->cfg.cbom_blocksize = 64;
cpu->cfg.cboz_blocksize = 64;
cpu->cfg.ext_icboz = true;
cpu->cfg.ext_smaia = true;
cpu->cfg.ext_ssaia = true;
cpu->cfg.ext_sscofpmf = true;
cpu->cfg.ext_sstc = true;
cpu->cfg.ext_svinval = true;
cpu->cfg.ext_svnapot = true;
cpu->cfg.ext_svpbmt = true;
cpu->cfg.ext_smstateen = true;
cpu->cfg.ext_zba = true;
cpu->cfg.ext_zbb = true;
cpu->cfg.ext_zbc = true;
cpu->cfg.ext_zbs = true;
cpu->cfg.ext_XVentanaCondOps = true;
cpu->cfg.mvendorid = VEYRON_V1_MVENDORID;
cpu->cfg.marchid = VEYRON_V1_MARCHID;
cpu->cfg.mimpid = VEYRON_V1_MIMPID;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(cpu, VM_1_10_SV48);
#endif
}
static void rv128_base_cpu_init(Object *obj)
{
if (qemu_tcg_mttcg_enabled()) {
/* Missing 128-bit aligned atomics */
error_report("128-bit RISC-V currently does not work with Multi "
"Threaded TCG. Please use: -accel tcg,thread=single");
exit(EXIT_FAILURE);
}
CPURISCVState *env = &RISCV_CPU(obj)->env;
/* We set this in the realise function */
set_misa(env, MXL_RV128, 0);
riscv_cpu_add_user_properties(obj);
/* Set latest version of privileged specification */
env->priv_ver = PRIV_VERSION_LATEST;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(RISCV_CPU(obj), VM_1_10_SV57);
#endif
}
#else
static void rv32_base_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
/* We set this in the realise function */
set_misa(env, MXL_RV32, 0);
riscv_cpu_add_user_properties(obj);
/* Set latest version of privileged specification */
env->priv_ver = PRIV_VERSION_LATEST;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(RISCV_CPU(obj), VM_1_10_SV32);
#endif
}
static void rv32_sifive_u_cpu_init(Object *obj)
{
RISCVCPU *cpu = RISCV_CPU(obj);
CPURISCVState *env = &cpu->env;
set_misa(env, MXL_RV32, RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
env->priv_ver = PRIV_VERSION_1_10_0;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(RISCV_CPU(obj), VM_1_10_SV32);
#endif
/* inherited from parent obj via riscv_cpu_init() */
cpu->cfg.ext_ifencei = true;
cpu->cfg.ext_icsr = true;
cpu->cfg.mmu = true;
cpu->cfg.pmp = true;
}
static void rv32_sifive_e_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
RISCVCPU *cpu = RISCV_CPU(obj);
set_misa(env, MXL_RV32, RVI | RVM | RVA | RVC | RVU);
env->priv_ver = PRIV_VERSION_1_10_0;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(cpu, VM_1_10_MBARE);
#endif
/* inherited from parent obj via riscv_cpu_init() */
cpu->cfg.ext_ifencei = true;
cpu->cfg.ext_icsr = true;
cpu->cfg.pmp = true;
}
static void rv32_ibex_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
RISCVCPU *cpu = RISCV_CPU(obj);
set_misa(env, MXL_RV32, RVI | RVM | RVC | RVU);
env->priv_ver = PRIV_VERSION_1_11_0;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(cpu, VM_1_10_MBARE);
#endif
cpu->cfg.epmp = true;
/* inherited from parent obj via riscv_cpu_init() */
cpu->cfg.ext_ifencei = true;
cpu->cfg.ext_icsr = true;
cpu->cfg.pmp = true;
}
static void rv32_imafcu_nommu_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
RISCVCPU *cpu = RISCV_CPU(obj);
set_misa(env, MXL_RV32, RVI | RVM | RVA | RVF | RVC | RVU);
env->priv_ver = PRIV_VERSION_1_10_0;
#ifndef CONFIG_USER_ONLY
set_satp_mode_max_supported(cpu, VM_1_10_MBARE);
#endif
/* inherited from parent obj via riscv_cpu_init() */
cpu->cfg.ext_ifencei = true;
cpu->cfg.ext_icsr = true;
cpu->cfg.pmp = true;
}
#endif
#if defined(CONFIG_KVM)
static void riscv_host_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
#if defined(TARGET_RISCV32)
set_misa(env, MXL_RV32, 0);
#elif defined(TARGET_RISCV64)
set_misa(env, MXL_RV64, 0);
#endif
riscv_cpu_add_user_properties(obj);
}
#endif /* CONFIG_KVM */
static ObjectClass *riscv_cpu_class_by_name(const char *cpu_model)
{
ObjectClass *oc;
char *typename;
char **cpuname;
cpuname = g_strsplit(cpu_model, ",", 1);
typename = g_strdup_printf(RISCV_CPU_TYPE_NAME("%s"), cpuname[0]);
oc = object_class_by_name(typename);
g_strfreev(cpuname);
g_free(typename);
if (!oc || !object_class_dynamic_cast(oc, TYPE_RISCV_CPU) ||
object_class_is_abstract(oc)) {
return NULL;
}
return oc;
}
static void riscv_cpu_dump_state(CPUState *cs, FILE *f, int flags)
{
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
int i, j;
uint8_t *p;
#if !defined(CONFIG_USER_ONLY)
if (riscv_has_ext(env, RVH)) {
qemu_fprintf(f, " %s %d\n", "V = ", env->virt_enabled);
}
#endif
qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "pc ", env->pc);
#ifndef CONFIG_USER_ONLY
{
static const int dump_csrs[] = {
CSR_MHARTID,
CSR_MSTATUS,
CSR_MSTATUSH,
/*
* CSR_SSTATUS is intentionally omitted here as its value
* can be figured out by looking at CSR_MSTATUS
*/
CSR_HSTATUS,
CSR_VSSTATUS,
CSR_MIP,
CSR_MIE,
CSR_MIDELEG,
CSR_HIDELEG,
CSR_MEDELEG,
CSR_HEDELEG,
CSR_MTVEC,
CSR_STVEC,
CSR_VSTVEC,
CSR_MEPC,
CSR_SEPC,
CSR_VSEPC,
CSR_MCAUSE,
CSR_SCAUSE,
CSR_VSCAUSE,
CSR_MTVAL,
CSR_STVAL,
CSR_HTVAL,
CSR_MTVAL2,
CSR_MSCRATCH,
CSR_SSCRATCH,
CSR_SATP,
CSR_MMTE,
CSR_UPMBASE,
CSR_UPMMASK,
CSR_SPMBASE,
CSR_SPMMASK,
CSR_MPMBASE,
CSR_MPMMASK,
};
for (int i = 0; i < ARRAY_SIZE(dump_csrs); ++i) {
int csrno = dump_csrs[i];
target_ulong val = 0;
RISCVException res = riscv_csrrw_debug(env, csrno, &val, 0, 0);
/*
* Rely on the smode, hmode, etc, predicates within csr.c
* to do the filtering of the registers that are present.
*/
if (res == RISCV_EXCP_NONE) {
qemu_fprintf(f, " %-8s " TARGET_FMT_lx "\n",
csr_ops[csrno].name, val);
}
}
}
#endif
for (i = 0; i < 32; i++) {
qemu_fprintf(f, " %-8s " TARGET_FMT_lx,
riscv_int_regnames[i], env->gpr[i]);
if ((i & 3) == 3) {
qemu_fprintf(f, "\n");
}
}
if (flags & CPU_DUMP_FPU) {
for (i = 0; i < 32; i++) {
qemu_fprintf(f, " %-8s %016" PRIx64,
riscv_fpr_regnames[i], env->fpr[i]);
if ((i & 3) == 3) {
qemu_fprintf(f, "\n");
}
}
}
if (riscv_has_ext(env, RVV) && (flags & CPU_DUMP_VPU)) {
static const int dump_rvv_csrs[] = {
CSR_VSTART,
CSR_VXSAT,
CSR_VXRM,
CSR_VCSR,
CSR_VL,
CSR_VTYPE,
CSR_VLENB,
};
for (int i = 0; i < ARRAY_SIZE(dump_rvv_csrs); ++i) {
int csrno = dump_rvv_csrs[i];
target_ulong val = 0;
RISCVException res = riscv_csrrw_debug(env, csrno, &val, 0, 0);
/*
* Rely on the smode, hmode, etc, predicates within csr.c
* to do the filtering of the registers that are present.
*/
if (res == RISCV_EXCP_NONE) {
qemu_fprintf(f, " %-8s " TARGET_FMT_lx "\n",
csr_ops[csrno].name, val);
}
}
uint16_t vlenb = cpu->cfg.vlen >> 3;
for (i = 0; i < 32; i++) {
qemu_fprintf(f, " %-8s ", riscv_rvv_regnames[i]);
p = (uint8_t *)env->vreg;
for (j = vlenb - 1 ; j >= 0; j--) {
qemu_fprintf(f, "%02x", *(p + i * vlenb + BYTE(j)));
}
qemu_fprintf(f, "\n");
}
}
}
static void riscv_cpu_set_pc(CPUState *cs, vaddr value)
{
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
if (env->xl == MXL_RV32) {
env->pc = (int32_t)value;
} else {
env->pc = value;
}
}
hw/core: Add CPUClass.get_pc Populate this new method for all targets. Always match the result that would be given by cpu_get_tb_cpu_state, as we will want these values to correspond in the logs. Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> (target/sparc) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- Cc: Eduardo Habkost <eduardo@habkost.net> (supporter:Machine core) Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> (supporter:Machine core) Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org> (reviewer:Machine core) Cc: Yanan Wang <wangyanan55@huawei.com> (reviewer:Machine core) Cc: Michael Rolnik <mrolnik@gmail.com> (maintainer:AVR TCG CPUs) Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> (maintainer:CRIS TCG CPUs) Cc: Taylor Simpson <tsimpson@quicinc.com> (supporter:Hexagon TCG CPUs) Cc: Song Gao <gaosong@loongson.cn> (maintainer:LoongArch TCG CPUs) Cc: Xiaojuan Yang <yangxiaojuan@loongson.cn> (maintainer:LoongArch TCG CPUs) Cc: Laurent Vivier <laurent@vivier.eu> (maintainer:M68K TCG CPUs) Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> (reviewer:MIPS TCG CPUs) Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> (reviewer:MIPS TCG CPUs) Cc: Chris Wulff <crwulff@gmail.com> (maintainer:NiosII TCG CPUs) Cc: Marek Vasut <marex@denx.de> (maintainer:NiosII TCG CPUs) Cc: Stafford Horne <shorne@gmail.com> (odd fixer:OpenRISC TCG CPUs) Cc: Yoshinori Sato <ysato@users.sourceforge.jp> (reviewer:RENESAS RX CPUs) Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> (maintainer:SPARC TCG CPUs) Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (maintainer:TriCore TCG CPUs) Cc: Max Filippov <jcmvbkbc@gmail.com> (maintainer:Xtensa TCG CPUs) Cc: qemu-arm@nongnu.org (open list:ARM TCG CPUs) Cc: qemu-ppc@nongnu.org (open list:PowerPC TCG CPUs) Cc: qemu-riscv@nongnu.org (open list:RISC-V TCG CPUs) Cc: qemu-s390x@nongnu.org (open list:S390 TCG CPUs)
2022-09-30 20:31:21 +03:00
static vaddr riscv_cpu_get_pc(CPUState *cs)
{
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
/* Match cpu_get_tb_cpu_state. */
if (env->xl == MXL_RV32) {
return env->pc & UINT32_MAX;
}
return env->pc;
}
static void riscv_cpu_synchronize_from_tb(CPUState *cs,
const TranslationBlock *tb)
{
if (!(tb_cflags(tb) & CF_PCREL)) {
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
RISCVMXL xl = FIELD_EX32(tb->flags, TB_FLAGS, XL);
tcg_debug_assert(!(cs->tcg_cflags & CF_PCREL));
if (xl == MXL_RV32) {
env->pc = (int32_t) tb->pc;
} else {
env->pc = tb->pc;
}
}
}
static bool riscv_cpu_has_work(CPUState *cs)
{
#ifndef CONFIG_USER_ONLY
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
/*
* Definition of the WFI instruction requires it to ignore the privilege
* mode and delegation registers, but respect individual enables
*/
return riscv_cpu_all_pending(env) != 0;
#else
return true;
#endif
}
static void riscv_restore_state_to_opc(CPUState *cs,
const TranslationBlock *tb,
const uint64_t *data)
{
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
RISCVMXL xl = FIELD_EX32(tb->flags, TB_FLAGS, XL);
target_ulong pc;
if (tb_cflags(tb) & CF_PCREL) {
pc = (env->pc & TARGET_PAGE_MASK) | data[0];
} else {
pc = data[0];
}
if (xl == MXL_RV32) {
env->pc = (int32_t)pc;
} else {
env->pc = pc;
}
env->bins = data[1];
}
static void riscv_cpu_reset_hold(Object *obj)
{
#ifndef CONFIG_USER_ONLY
uint8_t iprio;
int i, irq, rdzero;
#endif
CPUState *cs = CPU(obj);
RISCVCPU *cpu = RISCV_CPU(cs);
RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(cpu);
CPURISCVState *env = &cpu->env;
if (mcc->parent_phases.hold) {
mcc->parent_phases.hold(obj);
}
#ifndef CONFIG_USER_ONLY
env->misa_mxl = env->misa_mxl_max;
env->priv = PRV_M;
env->mstatus &= ~(MSTATUS_MIE | MSTATUS_MPRV);
if (env->misa_mxl > MXL_RV32) {
/*
* The reset status of SXL/UXL is undefined, but mstatus is WARL
* and we must ensure that the value after init is valid for read.
*/
env->mstatus = set_field(env->mstatus, MSTATUS64_SXL, env->misa_mxl);
env->mstatus = set_field(env->mstatus, MSTATUS64_UXL, env->misa_mxl);
if (riscv_has_ext(env, RVH)) {
env->vsstatus = set_field(env->vsstatus,
MSTATUS64_SXL, env->misa_mxl);
env->vsstatus = set_field(env->vsstatus,
MSTATUS64_UXL, env->misa_mxl);
env->mstatus_hs = set_field(env->mstatus_hs,
MSTATUS64_SXL, env->misa_mxl);
env->mstatus_hs = set_field(env->mstatus_hs,
MSTATUS64_UXL, env->misa_mxl);
}
}
env->mcause = 0;
env->miclaim = MIP_SGEIP;
env->pc = env->resetvec;
env->bins = 0;
env->two_stage_lookup = false;
env->menvcfg = (cpu->cfg.ext_svpbmt ? MENVCFG_PBMTE : 0) |
(cpu->cfg.ext_svadu ? MENVCFG_HADE : 0);
env->henvcfg = (cpu->cfg.ext_svpbmt ? HENVCFG_PBMTE : 0) |
(cpu->cfg.ext_svadu ? HENVCFG_HADE : 0);
/* Initialized default priorities of local interrupts. */
for (i = 0; i < ARRAY_SIZE(env->miprio); i++) {
iprio = riscv_cpu_default_priority(i);
env->miprio[i] = (i == IRQ_M_EXT) ? 0 : iprio;
env->siprio[i] = (i == IRQ_S_EXT) ? 0 : iprio;
env->hviprio[i] = 0;
}
i = 0;
while (!riscv_cpu_hviprio_index2irq(i, &irq, &rdzero)) {
if (!rdzero) {
env->hviprio[irq] = env->miprio[irq];
}
i++;
}
/* mmte is supposed to have pm.current hardwired to 1 */
env->mmte |= (EXT_STATUS_INITIAL | MMTE_M_PM_CURRENT);
#endif
env->xl = riscv_cpu_mxl(env);
riscv_cpu_update_mask(env);
cs->exception_index = RISCV_EXCP_NONE;
env->load_res = -1;
set_default_nan_mode(1, &env->fp_status);
#ifndef CONFIG_USER_ONLY
if (cpu->cfg.debug) {
riscv_trigger_init(env);
}
if (kvm_enabled()) {
kvm_riscv_reset_vcpu(cpu);
}
#endif
}
static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
{
RISCVCPU *cpu = RISCV_CPU(s);
CPURISCVState *env = &cpu->env;
info->target_info = &cpu->cfg;
switch (env->xl) {
case MXL_RV32:
info->print_insn = print_insn_riscv32;
break;
case MXL_RV64:
info->print_insn = print_insn_riscv64;
break;
case MXL_RV128:
info->print_insn = print_insn_riscv128;
break;
default:
g_assert_not_reached();
}
}
static void riscv_cpu_validate_v(CPURISCVState *env, RISCVCPUConfig *cfg,
Error **errp)
{
int vext_version = VEXT_VERSION_1_00_0;
if (!is_power_of_2(cfg->vlen)) {
error_setg(errp, "Vector extension VLEN must be power of 2");
return;
}
if (cfg->vlen > RV_VLEN_MAX || cfg->vlen < 128) {
error_setg(errp,
"Vector extension implementation only supports VLEN "
"in the range [128, %d]", RV_VLEN_MAX);
return;
}
if (!is_power_of_2(cfg->elen)) {
error_setg(errp, "Vector extension ELEN must be power of 2");
return;
}
if (cfg->elen > 64 || cfg->elen < 8) {
error_setg(errp,
"Vector extension implementation only supports ELEN "
"in the range [8, 64]");
return;
}
if (cfg->vext_spec) {
if (!g_strcmp0(cfg->vext_spec, "v1.0")) {
vext_version = VEXT_VERSION_1_00_0;
} else {
error_setg(errp, "Unsupported vector spec version '%s'",
cfg->vext_spec);
return;
}
} else {
qemu_log("vector version is not specified, "
"use the default value v1.0\n");
}
env->vext_ver = vext_version;
}
static void riscv_cpu_validate_priv_spec(RISCVCPU *cpu, Error **errp)
{
CPURISCVState *env = &cpu->env;
int priv_version = -1;
if (cpu->cfg.priv_spec) {
if (!g_strcmp0(cpu->cfg.priv_spec, "v1.12.0")) {
priv_version = PRIV_VERSION_1_12_0;
} else if (!g_strcmp0(cpu->cfg.priv_spec, "v1.11.0")) {
priv_version = PRIV_VERSION_1_11_0;
} else if (!g_strcmp0(cpu->cfg.priv_spec, "v1.10.0")) {
priv_version = PRIV_VERSION_1_10_0;
} else {
error_setg(errp,
"Unsupported privilege spec version '%s'",
cpu->cfg.priv_spec);
return;
}
env->priv_ver = priv_version;
}
}
static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu)
{
CPURISCVState *env = &cpu->env;
int i;
/* Force disable extensions if priv spec version does not match */
for (i = 0; i < ARRAY_SIZE(isa_edata_arr); i++) {
if (isa_ext_is_enabled(cpu, &isa_edata_arr[i]) &&
(env->priv_ver < isa_edata_arr[i].min_version)) {
isa_ext_update_enabled(cpu, &isa_edata_arr[i], false);
#ifndef CONFIG_USER_ONLY
warn_report("disabling %s extension for hart 0x" TARGET_FMT_lx
" because privilege spec version does not match",
isa_edata_arr[i].name, env->mhartid);
#else
warn_report("disabling %s extension because "
"privilege spec version does not match",
isa_edata_arr[i].name);
#endif
}
}
}
static void riscv_cpu_validate_misa_mxl(RISCVCPU *cpu, Error **errp)
{
RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(cpu);
CPUClass *cc = CPU_CLASS(mcc);
CPURISCVState *env = &cpu->env;
/* Validate that MISA_MXL is set properly. */
switch (env->misa_mxl_max) {
#ifdef TARGET_RISCV64
case MXL_RV64:
case MXL_RV128:
cc->gdb_core_xml_file = "riscv-64bit-cpu.xml";
break;
#endif
case MXL_RV32:
cc->gdb_core_xml_file = "riscv-32bit-cpu.xml";
break;
default:
g_assert_not_reached();
}
if (env->misa_mxl_max != env->misa_mxl) {
error_setg(errp, "misa_mxl_max must be equal to misa_mxl");
return;
}
}
/*
* Check consistency between chosen extensions while setting
* cpu->cfg accordingly.
*/
target/riscv: rework write_misa() write_misa() must use as much common logic as possible. We want to open code just the bits that are exclusive to the CSR write operation and TCG internals. Our validation is done with riscv_cpu_validate_set_extensions(), but we need a small tweak first. When enabling RVG we're doing: env->misa_ext |= RVI | RVM | RVA | RVF | RVD; env->misa_ext_mask = env->misa_ext; This works fine for realize() time but this can potentially overwrite env->misa_ext_mask if we reutilize the function for write_misa(). Instead of doing misa_ext_mask = misa_ext, sum up the RVG extensions in misa_ext_mask as well. This won't change realize() time behavior (misa_ext_mask will be == misa_ext) and will ensure that write_misa() won't change misa_ext_mask by accident. After that, rewrite write_misa() to work as follows: - mask the write using misa_ext_mask to avoid enabling unsupported extensions; - suppress RVC if the next insn isn't aligned; - disable RVG if any of RVG dependencies are being disabled by the user; - assign env->misa_ext and run riscv_cpu_validate_set_extensions(). On error, rollback env->misa_ext to its original value, logging a GUEST_ERROR to inform the user about the failed write; - handle RVF and MSTATUS_FS and continue as usual. Let's keep write_misa() as experimental for now until this logic gains enough mileage. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230517135714.211809-12-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-17 16:57:14 +03:00
void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
{
CPURISCVState *env = &cpu->env;
Error *local_err = NULL;
/* Do some ISA extension error checking */
if (riscv_has_ext(env, RVG) &&
!(riscv_has_ext(env, RVI) && riscv_has_ext(env, RVM) &&
riscv_has_ext(env, RVA) && riscv_has_ext(env, RVF) &&
riscv_has_ext(env, RVD) &&
cpu->cfg.ext_icsr && cpu->cfg.ext_ifencei)) {
warn_report("Setting G will also set IMAFD_Zicsr_Zifencei");
cpu->cfg.ext_icsr = true;
cpu->cfg.ext_ifencei = true;
env->misa_ext |= RVI | RVM | RVA | RVF | RVD;
target/riscv: rework write_misa() write_misa() must use as much common logic as possible. We want to open code just the bits that are exclusive to the CSR write operation and TCG internals. Our validation is done with riscv_cpu_validate_set_extensions(), but we need a small tweak first. When enabling RVG we're doing: env->misa_ext |= RVI | RVM | RVA | RVF | RVD; env->misa_ext_mask = env->misa_ext; This works fine for realize() time but this can potentially overwrite env->misa_ext_mask if we reutilize the function for write_misa(). Instead of doing misa_ext_mask = misa_ext, sum up the RVG extensions in misa_ext_mask as well. This won't change realize() time behavior (misa_ext_mask will be == misa_ext) and will ensure that write_misa() won't change misa_ext_mask by accident. After that, rewrite write_misa() to work as follows: - mask the write using misa_ext_mask to avoid enabling unsupported extensions; - suppress RVC if the next insn isn't aligned; - disable RVG if any of RVG dependencies are being disabled by the user; - assign env->misa_ext and run riscv_cpu_validate_set_extensions(). On error, rollback env->misa_ext to its original value, logging a GUEST_ERROR to inform the user about the failed write; - handle RVF and MSTATUS_FS and continue as usual. Let's keep write_misa() as experimental for now until this logic gains enough mileage. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230517135714.211809-12-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-17 16:57:14 +03:00
env->misa_ext_mask |= RVI | RVM | RVA | RVF | RVD;
}
if (riscv_has_ext(env, RVI) && riscv_has_ext(env, RVE)) {
error_setg(errp,
"I and E extensions are incompatible");
return;
}
if (!riscv_has_ext(env, RVI) && !riscv_has_ext(env, RVE)) {
error_setg(errp,
"Either I or E extension must be set");
return;
}
if (riscv_has_ext(env, RVS) && !riscv_has_ext(env, RVU)) {
error_setg(errp,
"Setting S extension without U extension is illegal");
return;
}
if (riscv_has_ext(env, RVH) && !riscv_has_ext(env, RVI)) {
error_setg(errp,
"H depends on an I base integer ISA with 32 x registers");
return;
}
if (riscv_has_ext(env, RVH) && !riscv_has_ext(env, RVS)) {
error_setg(errp, "H extension implicitly requires S-mode");
return;
}
if (riscv_has_ext(env, RVF) && !cpu->cfg.ext_icsr) {
error_setg(errp, "F extension requires Zicsr");
return;
}
if ((cpu->cfg.ext_zawrs) && !riscv_has_ext(env, RVA)) {
error_setg(errp, "Zawrs extension requires A extension");
return;
}
if (cpu->cfg.ext_zfh) {
cpu->cfg.ext_zfhmin = true;
}
if (cpu->cfg.ext_zfhmin && !riscv_has_ext(env, RVF)) {
error_setg(errp, "Zfh/Zfhmin extensions require F extension");
return;
}
if (cpu->cfg.ext_zfbfmin && !riscv_has_ext(env, RVF)) {
error_setg(errp, "Zfbfmin extension depends on F extension");
return;
}
if (riscv_has_ext(env, RVD) && !riscv_has_ext(env, RVF)) {
error_setg(errp, "D extension requires F extension");
return;
}
if (riscv_has_ext(env, RVV)) {
riscv_cpu_validate_v(env, &cpu->cfg, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
/* The V vector extension depends on the Zve64d extension */
cpu->cfg.ext_zve64d = true;
}
/* The Zve64d extension depends on the Zve64f extension */
if (cpu->cfg.ext_zve64d) {
cpu->cfg.ext_zve64f = true;
}
/* The Zve64f extension depends on the Zve32f extension */
if (cpu->cfg.ext_zve64f) {
cpu->cfg.ext_zve32f = true;
}
if (cpu->cfg.ext_zve64d && !riscv_has_ext(env, RVD)) {
error_setg(errp, "Zve64d/V extensions require D extension");
return;
}
if (cpu->cfg.ext_zve32f && !riscv_has_ext(env, RVF)) {
error_setg(errp, "Zve32f/Zve64f extensions require F extension");
return;
}
if (cpu->cfg.ext_zvfh) {
cpu->cfg.ext_zvfhmin = true;
}
if (cpu->cfg.ext_zvfhmin && !cpu->cfg.ext_zve32f) {
error_setg(errp, "Zvfh/Zvfhmin extensions require Zve32f extension");
return;
}
if (cpu->cfg.ext_zvfh && !cpu->cfg.ext_zfhmin) {
error_setg(errp, "Zvfh extensions requires Zfhmin extension");
return;
}
if (cpu->cfg.ext_zvfbfmin && !cpu->cfg.ext_zfbfmin) {
error_setg(errp, "Zvfbfmin extension depends on Zfbfmin extension");
return;
}
if (cpu->cfg.ext_zvfbfmin && !cpu->cfg.ext_zve32f) {
error_setg(errp, "Zvfbfmin extension depends on Zve32f extension");
return;
}
if (cpu->cfg.ext_zvfbfwma && !cpu->cfg.ext_zvfbfmin) {
error_setg(errp, "Zvfbfwma extension depends on Zvfbfmin extension");
return;
}
/* Set the ISA extensions, checks should have happened above */
if (cpu->cfg.ext_zhinx) {
cpu->cfg.ext_zhinxmin = true;
}
if ((cpu->cfg.ext_zdinx || cpu->cfg.ext_zhinxmin) && !cpu->cfg.ext_zfinx) {
error_setg(errp, "Zdinx/Zhinx/Zhinxmin extensions require Zfinx");
return;
}
if (cpu->cfg.ext_zfinx) {
if (!cpu->cfg.ext_icsr) {
error_setg(errp, "Zfinx extension requires Zicsr");
return;
}
if (riscv_has_ext(env, RVF)) {
error_setg(errp,
"Zfinx cannot be supported together with F extension");
return;
}
}
if (cpu->cfg.ext_zce) {
cpu->cfg.ext_zca = true;
cpu->cfg.ext_zcb = true;
cpu->cfg.ext_zcmp = true;
cpu->cfg.ext_zcmt = true;
if (riscv_has_ext(env, RVF) && env->misa_mxl_max == MXL_RV32) {
cpu->cfg.ext_zcf = true;
}
}
if (riscv_has_ext(env, RVC)) {
cpu->cfg.ext_zca = true;
if (riscv_has_ext(env, RVF) && env->misa_mxl_max == MXL_RV32) {
cpu->cfg.ext_zcf = true;
}
if (riscv_has_ext(env, RVD)) {
cpu->cfg.ext_zcd = true;
}
}
if (env->misa_mxl_max != MXL_RV32 && cpu->cfg.ext_zcf) {
error_setg(errp, "Zcf extension is only relevant to RV32");
return;
}
if (!riscv_has_ext(env, RVF) && cpu->cfg.ext_zcf) {
error_setg(errp, "Zcf extension requires F extension");
return;
}
if (!riscv_has_ext(env, RVD) && cpu->cfg.ext_zcd) {
error_setg(errp, "Zcd extension requires D extension");
return;
}
if ((cpu->cfg.ext_zcf || cpu->cfg.ext_zcd || cpu->cfg.ext_zcb ||
cpu->cfg.ext_zcmp || cpu->cfg.ext_zcmt) && !cpu->cfg.ext_zca) {
error_setg(errp, "Zcf/Zcd/Zcb/Zcmp/Zcmt extensions require Zca "
"extension");
return;
}
if (cpu->cfg.ext_zcd && (cpu->cfg.ext_zcmp || cpu->cfg.ext_zcmt)) {
error_setg(errp, "Zcmp/Zcmt extensions are incompatible with "
"Zcd extension");
return;
}
if (cpu->cfg.ext_zcmt && !cpu->cfg.ext_icsr) {
error_setg(errp, "Zcmt extension requires Zicsr extension");
return;
}
if (cpu->cfg.ext_zk) {
cpu->cfg.ext_zkn = true;
cpu->cfg.ext_zkr = true;
cpu->cfg.ext_zkt = true;
}
if (cpu->cfg.ext_zkn) {
cpu->cfg.ext_zbkb = true;
cpu->cfg.ext_zbkc = true;
cpu->cfg.ext_zbkx = true;
cpu->cfg.ext_zkne = true;
cpu->cfg.ext_zknd = true;
cpu->cfg.ext_zknh = true;
}
if (cpu->cfg.ext_zks) {
cpu->cfg.ext_zbkb = true;
cpu->cfg.ext_zbkc = true;
cpu->cfg.ext_zbkx = true;
cpu->cfg.ext_zksed = true;
cpu->cfg.ext_zksh = true;
}
/*
* Disable isa extensions based on priv spec after we
* validated and set everything we need.
*/
riscv_cpu_disable_priv_spec_isa_exts(cpu);
}
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
#ifndef CONFIG_USER_ONLY
static void riscv_cpu_satp_mode_finalize(RISCVCPU *cpu, Error **errp)
{
bool rv32 = riscv_cpu_mxl(&cpu->env) == MXL_RV32;
uint8_t satp_mode_map_max;
uint8_t satp_mode_supported_max =
satp_mode_max_from_map(cpu->cfg.satp_mode.supported);
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
if (cpu->cfg.satp_mode.map == 0) {
if (cpu->cfg.satp_mode.init == 0) {
/* If unset by the user, we fallback to the default satp mode. */
set_satp_mode_default_map(cpu);
} else {
/*
* Find the lowest level that was disabled and then enable the
* first valid level below which can be found in
* valid_vm_1_10_32/64.
*/
for (int i = 1; i < 16; ++i) {
if ((cpu->cfg.satp_mode.init & (1 << i)) &&
(cpu->cfg.satp_mode.supported & (1 << i))) {
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
for (int j = i - 1; j >= 0; --j) {
if (cpu->cfg.satp_mode.supported & (1 << j)) {
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
cpu->cfg.satp_mode.map |= (1 << j);
break;
}
}
break;
}
}
}
}
satp_mode_map_max = satp_mode_max_from_map(cpu->cfg.satp_mode.map);
/* Make sure the user asked for a supported configuration (HW and qemu) */
if (satp_mode_map_max > satp_mode_supported_max) {
error_setg(errp, "satp_mode %s is higher than hw max capability %s",
satp_mode_str(satp_mode_map_max, rv32),
satp_mode_str(satp_mode_supported_max, rv32));
return;
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
}
/*
* Make sure the user did not ask for an invalid configuration as per
* the specification.
*/
if (!rv32) {
for (int i = satp_mode_map_max - 1; i >= 0; --i) {
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
if (!(cpu->cfg.satp_mode.map & (1 << i)) &&
(cpu->cfg.satp_mode.init & (1 << i)) &&
(cpu->cfg.satp_mode.supported & (1 << i))) {
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
error_setg(errp, "cannot disable %s satp mode if %s "
"is enabled", satp_mode_str(i, false),
satp_mode_str(satp_mode_map_max, false));
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
return;
}
}
}
/* Finally expand the map so that all valid modes are set */
for (int i = satp_mode_map_max - 1; i >= 0; --i) {
if (cpu->cfg.satp_mode.supported & (1 << i)) {
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
cpu->cfg.satp_mode.map |= (1 << i);
}
}
}
#endif
static void riscv_cpu_finalize_features(RISCVCPU *cpu, Error **errp)
{
#ifndef CONFIG_USER_ONLY
Error *local_err = NULL;
riscv_cpu_satp_mode_finalize(cpu, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
#endif
}
static void riscv_cpu_validate_misa_priv(CPURISCVState *env, Error **errp)
{
if (riscv_has_ext(env, RVH) && env->priv_ver < PRIV_VERSION_1_12_0) {
error_setg(errp, "H extension requires priv spec 1.12.0");
return;
}
}
target/riscv: skip features setup for KVM CPUs As it is today it's not possible to use '-cpu host' if the RISC-V host has RVH enabled. This is the resulting error: $ ./qemu/build/qemu-system-riscv64 \ -machine virt,accel=kvm -m 2G -smp 1 \ -nographic -snapshot -kernel ./guest_imgs/Image \ -initrd ./guest_imgs/rootfs_kvm_riscv64.img \ -append "earlycon=sbi root=/dev/ram rw" \ -cpu host qemu-system-riscv64: H extension requires priv spec 1.12.0 This happens because we're checking for priv spec for all CPUs, and since we're not setting env->priv_ver for the 'host' CPU, it's being default to zero (i.e. PRIV_SPEC_1_10_0). In reality env->priv_ver does not make sense when running with the KVM 'host' CPU. It's used to gate certain CSRs/extensions during translation to make them unavailable if the hart declares an older spec version. It doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs are available [1]. 'priv_ver' is just one example. We're doing a lot of feature validation and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs. Validating the feature set for those CPUs is a KVM problem that should be handled in KVM specific code. The new riscv_cpu_realize_tcg() helper contains all validation logic that are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're running TCG and, if it's the case, proceed with the usual TCG realize() logic. [1] lib/sbi/sbi_hart.c, hart_detect_features() Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-06 13:17:19 +03:00
static void riscv_cpu_realize_tcg(DeviceState *dev, Error **errp)
{
RISCVCPU *cpu = RISCV_CPU(dev);
CPURISCVState *env = &cpu->env;
Error *local_err = NULL;
riscv_cpu_validate_misa_mxl(cpu, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
riscv_cpu_validate_priv_spec(cpu, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
riscv_cpu_validate_misa_priv(env, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
if (cpu->cfg.epmp && !cpu->cfg.pmp) {
/*
* Enhanced PMP should only be available
* on harts with PMP support
*/
error_setg(errp, "Invalid configuration: EPMP requires PMP support");
return;
}
riscv_cpu_validate_set_extensions(cpu, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
#ifndef CONFIG_USER_ONLY
target/riscv: skip features setup for KVM CPUs As it is today it's not possible to use '-cpu host' if the RISC-V host has RVH enabled. This is the resulting error: $ ./qemu/build/qemu-system-riscv64 \ -machine virt,accel=kvm -m 2G -smp 1 \ -nographic -snapshot -kernel ./guest_imgs/Image \ -initrd ./guest_imgs/rootfs_kvm_riscv64.img \ -append "earlycon=sbi root=/dev/ram rw" \ -cpu host qemu-system-riscv64: H extension requires priv spec 1.12.0 This happens because we're checking for priv spec for all CPUs, and since we're not setting env->priv_ver for the 'host' CPU, it's being default to zero (i.e. PRIV_SPEC_1_10_0). In reality env->priv_ver does not make sense when running with the KVM 'host' CPU. It's used to gate certain CSRs/extensions during translation to make them unavailable if the hart declares an older spec version. It doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs are available [1]. 'priv_ver' is just one example. We're doing a lot of feature validation and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs. Validating the feature set for those CPUs is a KVM problem that should be handled in KVM specific code. The new riscv_cpu_realize_tcg() helper contains all validation logic that are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're running TCG and, if it's the case, proceed with the usual TCG realize() logic. [1] lib/sbi/sbi_hart.c, hart_detect_features() Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-06 13:17:19 +03:00
CPU(dev)->tcg_cflags |= CF_PCREL;
if (cpu->cfg.ext_sstc) {
riscv_timer_init(cpu);
}
if (cpu->cfg.pmu_num) {
if (!riscv_pmu_init(cpu, cpu->cfg.pmu_num) && cpu->cfg.ext_sscofpmf) {
cpu->pmu_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
riscv_pmu_timer_cb, cpu);
}
}
#endif
target/riscv: skip features setup for KVM CPUs As it is today it's not possible to use '-cpu host' if the RISC-V host has RVH enabled. This is the resulting error: $ ./qemu/build/qemu-system-riscv64 \ -machine virt,accel=kvm -m 2G -smp 1 \ -nographic -snapshot -kernel ./guest_imgs/Image \ -initrd ./guest_imgs/rootfs_kvm_riscv64.img \ -append "earlycon=sbi root=/dev/ram rw" \ -cpu host qemu-system-riscv64: H extension requires priv spec 1.12.0 This happens because we're checking for priv spec for all CPUs, and since we're not setting env->priv_ver for the 'host' CPU, it's being default to zero (i.e. PRIV_SPEC_1_10_0). In reality env->priv_ver does not make sense when running with the KVM 'host' CPU. It's used to gate certain CSRs/extensions during translation to make them unavailable if the hart declares an older spec version. It doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs are available [1]. 'priv_ver' is just one example. We're doing a lot of feature validation and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs. Validating the feature set for those CPUs is a KVM problem that should be handled in KVM specific code. The new riscv_cpu_realize_tcg() helper contains all validation logic that are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're running TCG and, if it's the case, proceed with the usual TCG realize() logic. [1] lib/sbi/sbi_hart.c, hart_detect_features() Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-06 13:17:19 +03:00
}
static void riscv_cpu_realize(DeviceState *dev, Error **errp)
{
CPUState *cs = CPU(dev);
RISCVCPU *cpu = RISCV_CPU(dev);
RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(dev);
Error *local_err = NULL;
cpu_exec_realizefn(cs, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
if (tcg_enabled()) {
riscv_cpu_realize_tcg(dev, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
}
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
riscv_cpu_finalize_features(cpu, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
riscv_cpu_register_gdb_regs_for_features(cs);
qemu_init_vcpu(cs);
cpu_reset(cs);
mcc->parent_realize(dev, errp);
}
#ifndef CONFIG_USER_ONLY
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
static void cpu_riscv_get_satp(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
RISCVSATPMap *satp_map = opaque;
uint8_t satp = satp_mode_from_str(name);
bool value;
value = satp_map->map & (1 << satp);
visit_type_bool(v, name, &value, errp);
}
static void cpu_riscv_set_satp(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
RISCVSATPMap *satp_map = opaque;
uint8_t satp = satp_mode_from_str(name);
bool value;
if (!visit_type_bool(v, name, &value, errp)) {
return;
}
satp_map->map = deposit32(satp_map->map, satp, 1, value);
satp_map->init |= 1 << satp;
}
static void riscv_add_satp_mode_properties(Object *obj)
{
RISCVCPU *cpu = RISCV_CPU(obj);
if (cpu->env.misa_mxl == MXL_RV32) {
object_property_add(obj, "sv32", "bool", cpu_riscv_get_satp,
cpu_riscv_set_satp, NULL, &cpu->cfg.satp_mode);
} else {
object_property_add(obj, "sv39", "bool", cpu_riscv_get_satp,
cpu_riscv_set_satp, NULL, &cpu->cfg.satp_mode);
object_property_add(obj, "sv48", "bool", cpu_riscv_get_satp,
cpu_riscv_set_satp, NULL, &cpu->cfg.satp_mode);
object_property_add(obj, "sv57", "bool", cpu_riscv_get_satp,
cpu_riscv_set_satp, NULL, &cpu->cfg.satp_mode);
object_property_add(obj, "sv64", "bool", cpu_riscv_get_satp,
cpu_riscv_set_satp, NULL, &cpu->cfg.satp_mode);
}
}
static void riscv_cpu_set_irq(void *opaque, int irq, int level)
{
RISCVCPU *cpu = RISCV_CPU(opaque);
CPURISCVState *env = &cpu->env;
if (irq < IRQ_LOCAL_MAX) {
switch (irq) {
case IRQ_U_SOFT:
case IRQ_S_SOFT:
case IRQ_VS_SOFT:
case IRQ_M_SOFT:
case IRQ_U_TIMER:
case IRQ_S_TIMER:
case IRQ_VS_TIMER:
case IRQ_M_TIMER:
case IRQ_U_EXT:
case IRQ_VS_EXT:
case IRQ_M_EXT:
if (kvm_enabled()) {
kvm_riscv_set_irq(cpu, irq, level);
} else {
riscv_cpu_update_mip(env, 1 << irq, BOOL_TO_MASK(level));
}
break;
case IRQ_S_EXT:
if (kvm_enabled()) {
kvm_riscv_set_irq(cpu, irq, level);
} else {
env->external_seip = level;
riscv_cpu_update_mip(env, 1 << irq,
BOOL_TO_MASK(level | env->software_seip));
}
break;
default:
g_assert_not_reached();
}
} else if (irq < (IRQ_LOCAL_MAX + IRQ_LOCAL_GUEST_MAX)) {
/* Require H-extension for handling guest local interrupts */
if (!riscv_has_ext(env, RVH)) {
g_assert_not_reached();
}
/* Compute bit position in HGEIP CSR */
irq = irq - IRQ_LOCAL_MAX + 1;
if (env->geilen < irq) {
g_assert_not_reached();
}
/* Update HGEIP CSR */
env->hgeip &= ~((target_ulong)1 << irq);
if (level) {
env->hgeip |= (target_ulong)1 << irq;
}
/* Update mip.SGEIP bit */
riscv_cpu_update_mip(env, MIP_SGEIP,
BOOL_TO_MASK(!!(env->hgeie & env->hgeip)));
} else {
g_assert_not_reached();
}
}
#endif /* CONFIG_USER_ONLY */
static void riscv_cpu_init(Object *obj)
{
RISCVCPU *cpu = RISCV_CPU(obj);
cpu_set_cpustate_pointers(cpu);
#ifndef CONFIG_USER_ONLY
qdev_init_gpio_in(DEVICE(cpu), riscv_cpu_set_irq,
IRQ_LOCAL_MAX + IRQ_LOCAL_GUEST_MAX);
#endif /* CONFIG_USER_ONLY */
}
target/riscv: introduce riscv_cpu_add_misa_properties() Ever since RISCVCPUConfig got introduced users are able to set CPU extensions in the command line. User settings are reflected in the cpu->cfg object for later use. These properties are used in the target/riscv/cpu.c code, most notably in riscv_cpu_validate_set_extensions(), where most of our realize time validations are made. And then there's env->misa_ext, the field where the MISA extensions are set, that is read everywhere else. We need to keep env->misa_ext updated with cpu->cfg settings, since our validations rely on it, forcing us to make register_cpu_props() write cpu->cfg.ext_N flags to cover for named CPUs that aren't used named properties but also needs to go through the same validation steps. Failing to so will make those name CPUs fail validation (see c66ffcd5358b for more info). Not only that, but we also need to sync env->misa_ext with cpu->cfg again during realize() time to catch any change the user might have done, since the rest of the code relies on that. Making cpu->cfg.ext_N and env->misa_ext reflect each other is not needed. What we want is a way for users to enable/disable MISA extensions, and there's nothing stopping us from letting the user write env->misa_ext directly. Here are the artifacts that will enable us to do that: - RISCVCPUMisaExtConfig will declare each MISA property; - cpu_set_misa_ext_cfg() is the setter for each property. We'll write env->misa_ext and env->misa_ext_mask with the appropriate misa_bit; cutting off cpu->cfg.ext_N from the logic; - cpu_get_misa_ext_cfg() is a getter that will retrieve the current val of the property based on env->misa_ext; - riscv_cpu_add_misa_properties() will be called in register_cpu_props() to init all MISA properties from the misa_ext_cfgs[] array. With this infrastructure we'll start to get rid of each cpu->cfg.ext_N attribute in the next patches. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406180351.570807-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-06 21:03:35 +03:00
typedef struct RISCVCPUMisaExtConfig {
const char *name;
const char *description;
target_ulong misa_bit;
bool enabled;
} RISCVCPUMisaExtConfig;
static void cpu_set_misa_ext_cfg(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
const RISCVCPUMisaExtConfig *misa_ext_cfg = opaque;
target_ulong misa_bit = misa_ext_cfg->misa_bit;
RISCVCPU *cpu = RISCV_CPU(obj);
CPURISCVState *env = &cpu->env;
bool value;
if (!visit_type_bool(v, name, &value, errp)) {
return;
}
if (value) {
env->misa_ext |= misa_bit;
env->misa_ext_mask |= misa_bit;
} else {
env->misa_ext &= ~misa_bit;
env->misa_ext_mask &= ~misa_bit;
}
}
static void cpu_get_misa_ext_cfg(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
const RISCVCPUMisaExtConfig *misa_ext_cfg = opaque;
target_ulong misa_bit = misa_ext_cfg->misa_bit;
RISCVCPU *cpu = RISCV_CPU(obj);
CPURISCVState *env = &cpu->env;
bool value;
value = env->misa_ext & misa_bit;
visit_type_bool(v, name, &value, errp);
}
target/riscv/cpu: add misa_ext_info_arr[] Next patch will add KVM specific user properties for both MISA and multi-letter extensions. For MISA extensions we want to make use of what is already available in misa_ext_cfgs[] to avoid code repetition. misa_ext_info_arr[] array will hold name and description for each MISA extension that misa_ext_cfgs[] is declaring. We'll then use this new array in KVM code to avoid duplicating strings. Two getters were added to allow KVM to retrieve the 'name' and 'description' for each MISA property. There's nothing holding us back from doing the same with multi-letter extensions. For now doing just with MISA extensions is enough. It is worth documenting that even using the __bultin_ctz() directive to populate the misa_ext_info_arr[] we are forced to assign 'name' and 'description' during runtime in riscv_cpu_add_misa_properties(). The reason is that some Gitlab runners ('clang-user' and 'tsan-build') will throw errors like this if we fetch 'name' and 'description' from the array in the MISA_CFG() macro: ../target/riscv/cpu.c:1624:5: error: initializer element is not a compile-time constant MISA_CFG(RVA, true), ^~~~~~~~~~~~~~~~~~~ ../target/riscv/cpu.c:1619:53: note: expanded from macro 'MISA_CFG' {.name = misa_ext_info_arr[MISA_INFO_IDX(_bit)].name, \ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ gcc and others compilers/builders were fine with that change. We can't ignore failures in the Gitlab pipeline though, so code was changed to make every runner happy. As a side effect, misa_ext_cfg[] is no longer a 'const' array because it must be set during runtime. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706101738.460804-12-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-06 13:17:29 +03:00
typedef struct misa_ext_info {
const char *name;
const char *description;
} MISAExtInfo;
#define MISA_INFO_IDX(_bit) \
__builtin_ctz(_bit)
#define MISA_EXT_INFO(_bit, _propname, _descr) \
[MISA_INFO_IDX(_bit)] = {.name = _propname, .description = _descr}
static const MISAExtInfo misa_ext_info_arr[] = {
MISA_EXT_INFO(RVA, "a", "Atomic instructions"),
MISA_EXT_INFO(RVC, "c", "Compressed instructions"),
MISA_EXT_INFO(RVD, "d", "Double-precision float point"),
MISA_EXT_INFO(RVF, "f", "Single-precision float point"),
MISA_EXT_INFO(RVI, "i", "Base integer instruction set"),
MISA_EXT_INFO(RVE, "e", "Base integer instruction set (embedded)"),
MISA_EXT_INFO(RVM, "m", "Integer multiplication and division"),
MISA_EXT_INFO(RVS, "s", "Supervisor-level instructions"),
MISA_EXT_INFO(RVU, "u", "User-level instructions"),
MISA_EXT_INFO(RVH, "h", "Hypervisor"),
MISA_EXT_INFO(RVJ, "x-j", "Dynamic translated languages"),
MISA_EXT_INFO(RVV, "v", "Vector operations"),
MISA_EXT_INFO(RVG, "g", "General purpose (IMAFD_Zicsr_Zifencei)"),
};
static int riscv_validate_misa_info_idx(uint32_t bit)
{
int idx;
/*
* Our lowest valid input (RVA) is 1 and
* __builtin_ctz() is UB with zero.
*/
g_assert(bit != 0);
idx = MISA_INFO_IDX(bit);
g_assert(idx < ARRAY_SIZE(misa_ext_info_arr));
return idx;
}
const char *riscv_get_misa_ext_name(uint32_t bit)
{
int idx = riscv_validate_misa_info_idx(bit);
const char *val = misa_ext_info_arr[idx].name;
g_assert(val != NULL);
return val;
}
const char *riscv_get_misa_ext_description(uint32_t bit)
{
int idx = riscv_validate_misa_info_idx(bit);
const char *val = misa_ext_info_arr[idx].description;
g_assert(val != NULL);
return val;
}
#define MISA_CFG(_bit, _enabled) \
{.misa_bit = _bit, .enabled = _enabled}
static RISCVCPUMisaExtConfig misa_ext_cfgs[] = {
MISA_CFG(RVA, true),
MISA_CFG(RVC, true),
MISA_CFG(RVD, true),
MISA_CFG(RVF, true),
MISA_CFG(RVI, true),
MISA_CFG(RVE, false),
MISA_CFG(RVM, true),
MISA_CFG(RVS, true),
MISA_CFG(RVU, true),
MISA_CFG(RVH, true),
MISA_CFG(RVJ, false),
MISA_CFG(RVV, false),
MISA_CFG(RVG, false),
};
target/riscv: introduce riscv_cpu_add_misa_properties() Ever since RISCVCPUConfig got introduced users are able to set CPU extensions in the command line. User settings are reflected in the cpu->cfg object for later use. These properties are used in the target/riscv/cpu.c code, most notably in riscv_cpu_validate_set_extensions(), where most of our realize time validations are made. And then there's env->misa_ext, the field where the MISA extensions are set, that is read everywhere else. We need to keep env->misa_ext updated with cpu->cfg settings, since our validations rely on it, forcing us to make register_cpu_props() write cpu->cfg.ext_N flags to cover for named CPUs that aren't used named properties but also needs to go through the same validation steps. Failing to so will make those name CPUs fail validation (see c66ffcd5358b for more info). Not only that, but we also need to sync env->misa_ext with cpu->cfg again during realize() time to catch any change the user might have done, since the rest of the code relies on that. Making cpu->cfg.ext_N and env->misa_ext reflect each other is not needed. What we want is a way for users to enable/disable MISA extensions, and there's nothing stopping us from letting the user write env->misa_ext directly. Here are the artifacts that will enable us to do that: - RISCVCPUMisaExtConfig will declare each MISA property; - cpu_set_misa_ext_cfg() is the setter for each property. We'll write env->misa_ext and env->misa_ext_mask with the appropriate misa_bit; cutting off cpu->cfg.ext_N from the logic; - cpu_get_misa_ext_cfg() is a getter that will retrieve the current val of the property based on env->misa_ext; - riscv_cpu_add_misa_properties() will be called in register_cpu_props() to init all MISA properties from the misa_ext_cfgs[] array. With this infrastructure we'll start to get rid of each cpu->cfg.ext_N attribute in the next patches. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406180351.570807-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-06 21:03:35 +03:00
static void riscv_cpu_add_misa_properties(Object *cpu_obj)
{
int i;
for (i = 0; i < ARRAY_SIZE(misa_ext_cfgs); i++) {
target/riscv/cpu: add misa_ext_info_arr[] Next patch will add KVM specific user properties for both MISA and multi-letter extensions. For MISA extensions we want to make use of what is already available in misa_ext_cfgs[] to avoid code repetition. misa_ext_info_arr[] array will hold name and description for each MISA extension that misa_ext_cfgs[] is declaring. We'll then use this new array in KVM code to avoid duplicating strings. Two getters were added to allow KVM to retrieve the 'name' and 'description' for each MISA property. There's nothing holding us back from doing the same with multi-letter extensions. For now doing just with MISA extensions is enough. It is worth documenting that even using the __bultin_ctz() directive to populate the misa_ext_info_arr[] we are forced to assign 'name' and 'description' during runtime in riscv_cpu_add_misa_properties(). The reason is that some Gitlab runners ('clang-user' and 'tsan-build') will throw errors like this if we fetch 'name' and 'description' from the array in the MISA_CFG() macro: ../target/riscv/cpu.c:1624:5: error: initializer element is not a compile-time constant MISA_CFG(RVA, true), ^~~~~~~~~~~~~~~~~~~ ../target/riscv/cpu.c:1619:53: note: expanded from macro 'MISA_CFG' {.name = misa_ext_info_arr[MISA_INFO_IDX(_bit)].name, \ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ gcc and others compilers/builders were fine with that change. We can't ignore failures in the Gitlab pipeline though, so code was changed to make every runner happy. As a side effect, misa_ext_cfg[] is no longer a 'const' array because it must be set during runtime. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706101738.460804-12-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-06 13:17:29 +03:00
RISCVCPUMisaExtConfig *misa_cfg = &misa_ext_cfgs[i];
int bit = misa_cfg->misa_bit;
misa_cfg->name = riscv_get_misa_ext_name(bit);
misa_cfg->description = riscv_get_misa_ext_description(bit);
target/riscv: introduce riscv_cpu_add_misa_properties() Ever since RISCVCPUConfig got introduced users are able to set CPU extensions in the command line. User settings are reflected in the cpu->cfg object for later use. These properties are used in the target/riscv/cpu.c code, most notably in riscv_cpu_validate_set_extensions(), where most of our realize time validations are made. And then there's env->misa_ext, the field where the MISA extensions are set, that is read everywhere else. We need to keep env->misa_ext updated with cpu->cfg settings, since our validations rely on it, forcing us to make register_cpu_props() write cpu->cfg.ext_N flags to cover for named CPUs that aren't used named properties but also needs to go through the same validation steps. Failing to so will make those name CPUs fail validation (see c66ffcd5358b for more info). Not only that, but we also need to sync env->misa_ext with cpu->cfg again during realize() time to catch any change the user might have done, since the rest of the code relies on that. Making cpu->cfg.ext_N and env->misa_ext reflect each other is not needed. What we want is a way for users to enable/disable MISA extensions, and there's nothing stopping us from letting the user write env->misa_ext directly. Here are the artifacts that will enable us to do that: - RISCVCPUMisaExtConfig will declare each MISA property; - cpu_set_misa_ext_cfg() is the setter for each property. We'll write env->misa_ext and env->misa_ext_mask with the appropriate misa_bit; cutting off cpu->cfg.ext_N from the logic; - cpu_get_misa_ext_cfg() is a getter that will retrieve the current val of the property based on env->misa_ext; - riscv_cpu_add_misa_properties() will be called in register_cpu_props() to init all MISA properties from the misa_ext_cfgs[] array. With this infrastructure we'll start to get rid of each cpu->cfg.ext_N attribute in the next patches. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406180351.570807-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-06 21:03:35 +03:00
target/riscv: add KVM specific MISA properties Using all TCG user properties in KVM is tricky. First because KVM supports only a small subset of what TCG provides, so most of the cpu->cfg flags do nothing for KVM. Second, and more important, we don't have a way of telling if any given value is an user input or not. For TCG this has a small impact since we just validating everything and error out if needed. But for KVM it would be good to know if a given value was set by the user or if it's a value already provided by KVM. Otherwise we don't know how to handle failed kvm_set_one_regs() when writing the configurations back. These characteristics make it overly complicated to use the same user facing flags for both KVM and TCG. A simpler approach is to create KVM specific properties that have specialized logic, forking KVM and TCG use cases for those cases only. Fully separating KVM/TCG properties is unneeded at this point - in fact we want the user experience to be as equal as possible, regardless of the acceleration chosen. We'll start this fork with the MISA properties, adding the MISA bits that the KVM driver currently supports. A new KVMCPUConfig type is introduced. It'll hold general information about an extension. For MISA extensions we're going to use the newly created getters of misa_ext_infos[] to populate their name and description. 'offset' holds the MISA bit (RVA, RVC, ...). We're calling it 'offset' instead of 'misa_bit' because this same KVMCPUConfig struct will be used to multi-letter extensions later on. This new type also holds a 'user_set' flag. This flag will be set when the user set an option that's different than what is already configured in the host, requiring KVM intervention to write the regs back during kvm_arch_init_vcpu(). Similar mechanics will be implemented for multi-letter extensions as well. There is no need to duplicate more code than necessary, so we're going to use the existing kvm_riscv_init_user_properties() to add the KVM specific properties. Any code that is adding a TCG user prop is then changed slightly to verify first if there's a KVM prop with the same name already added. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706101738.460804-13-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-06 13:17:30 +03:00
/* Check if KVM already created the property */
if (object_property_find(cpu_obj, misa_cfg->name)) {
continue;
}
target/riscv: introduce riscv_cpu_add_misa_properties() Ever since RISCVCPUConfig got introduced users are able to set CPU extensions in the command line. User settings are reflected in the cpu->cfg object for later use. These properties are used in the target/riscv/cpu.c code, most notably in riscv_cpu_validate_set_extensions(), where most of our realize time validations are made. And then there's env->misa_ext, the field where the MISA extensions are set, that is read everywhere else. We need to keep env->misa_ext updated with cpu->cfg settings, since our validations rely on it, forcing us to make register_cpu_props() write cpu->cfg.ext_N flags to cover for named CPUs that aren't used named properties but also needs to go through the same validation steps. Failing to so will make those name CPUs fail validation (see c66ffcd5358b for more info). Not only that, but we also need to sync env->misa_ext with cpu->cfg again during realize() time to catch any change the user might have done, since the rest of the code relies on that. Making cpu->cfg.ext_N and env->misa_ext reflect each other is not needed. What we want is a way for users to enable/disable MISA extensions, and there's nothing stopping us from letting the user write env->misa_ext directly. Here are the artifacts that will enable us to do that: - RISCVCPUMisaExtConfig will declare each MISA property; - cpu_set_misa_ext_cfg() is the setter for each property. We'll write env->misa_ext and env->misa_ext_mask with the appropriate misa_bit; cutting off cpu->cfg.ext_N from the logic; - cpu_get_misa_ext_cfg() is a getter that will retrieve the current val of the property based on env->misa_ext; - riscv_cpu_add_misa_properties() will be called in register_cpu_props() to init all MISA properties from the misa_ext_cfgs[] array. With this infrastructure we'll start to get rid of each cpu->cfg.ext_N attribute in the next patches. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406180351.570807-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-06 21:03:35 +03:00
object_property_add(cpu_obj, misa_cfg->name, "bool",
cpu_get_misa_ext_cfg,
cpu_set_misa_ext_cfg,
NULL, (void *)misa_cfg);
object_property_set_description(cpu_obj, misa_cfg->name,
misa_cfg->description);
object_property_set_bool(cpu_obj, misa_cfg->name,
misa_cfg->enabled, NULL);
}
}
static Property riscv_cpu_extensions[] = {
/* Defaults for standard extensions */
DEFINE_PROP_UINT8("pmu-num", RISCVCPU, cfg.pmu_num, 16),
DEFINE_PROP_BOOL("sscofpmf", RISCVCPU, cfg.ext_sscofpmf, false),
DEFINE_PROP_BOOL("Zifencei", RISCVCPU, cfg.ext_ifencei, true),
DEFINE_PROP_BOOL("Zicsr", RISCVCPU, cfg.ext_icsr, true),
DEFINE_PROP_BOOL("Zihintpause", RISCVCPU, cfg.ext_zihintpause, true),
DEFINE_PROP_BOOL("Zawrs", RISCVCPU, cfg.ext_zawrs, true),
DEFINE_PROP_BOOL("Zfh", RISCVCPU, cfg.ext_zfh, false),
DEFINE_PROP_BOOL("Zfhmin", RISCVCPU, cfg.ext_zfhmin, false),
DEFINE_PROP_BOOL("Zve32f", RISCVCPU, cfg.ext_zve32f, false),
DEFINE_PROP_BOOL("Zve64f", RISCVCPU, cfg.ext_zve64f, false),
DEFINE_PROP_BOOL("Zve64d", RISCVCPU, cfg.ext_zve64d, false),
DEFINE_PROP_BOOL("mmu", RISCVCPU, cfg.mmu, true),
DEFINE_PROP_BOOL("pmp", RISCVCPU, cfg.pmp, true),
DEFINE_PROP_BOOL("sstc", RISCVCPU, cfg.ext_sstc, true),
DEFINE_PROP_STRING("priv_spec", RISCVCPU, cfg.priv_spec),
DEFINE_PROP_STRING("vext_spec", RISCVCPU, cfg.vext_spec),
DEFINE_PROP_UINT16("vlen", RISCVCPU, cfg.vlen, 128),
DEFINE_PROP_UINT16("elen", RISCVCPU, cfg.elen, 64),
DEFINE_PROP_BOOL("smstateen", RISCVCPU, cfg.ext_smstateen, false),
DEFINE_PROP_BOOL("svadu", RISCVCPU, cfg.ext_svadu, true),
DEFINE_PROP_BOOL("svinval", RISCVCPU, cfg.ext_svinval, false),
DEFINE_PROP_BOOL("svnapot", RISCVCPU, cfg.ext_svnapot, false),
DEFINE_PROP_BOOL("svpbmt", RISCVCPU, cfg.ext_svpbmt, false),
DEFINE_PROP_BOOL("zba", RISCVCPU, cfg.ext_zba, true),
DEFINE_PROP_BOOL("zbb", RISCVCPU, cfg.ext_zbb, true),
DEFINE_PROP_BOOL("zbc", RISCVCPU, cfg.ext_zbc, true),
DEFINE_PROP_BOOL("zbkb", RISCVCPU, cfg.ext_zbkb, false),
DEFINE_PROP_BOOL("zbkc", RISCVCPU, cfg.ext_zbkc, false),
DEFINE_PROP_BOOL("zbkx", RISCVCPU, cfg.ext_zbkx, false),
DEFINE_PROP_BOOL("zbs", RISCVCPU, cfg.ext_zbs, true),
DEFINE_PROP_BOOL("zk", RISCVCPU, cfg.ext_zk, false),
DEFINE_PROP_BOOL("zkn", RISCVCPU, cfg.ext_zkn, false),
DEFINE_PROP_BOOL("zknd", RISCVCPU, cfg.ext_zknd, false),
DEFINE_PROP_BOOL("zkne", RISCVCPU, cfg.ext_zkne, false),
DEFINE_PROP_BOOL("zknh", RISCVCPU, cfg.ext_zknh, false),
DEFINE_PROP_BOOL("zkr", RISCVCPU, cfg.ext_zkr, false),
DEFINE_PROP_BOOL("zks", RISCVCPU, cfg.ext_zks, false),
DEFINE_PROP_BOOL("zksed", RISCVCPU, cfg.ext_zksed, false),
DEFINE_PROP_BOOL("zksh", RISCVCPU, cfg.ext_zksh, false),
DEFINE_PROP_BOOL("zkt", RISCVCPU, cfg.ext_zkt, false),
DEFINE_PROP_BOOL("zdinx", RISCVCPU, cfg.ext_zdinx, false),
DEFINE_PROP_BOOL("zfinx", RISCVCPU, cfg.ext_zfinx, false),
DEFINE_PROP_BOOL("zhinx", RISCVCPU, cfg.ext_zhinx, false),
DEFINE_PROP_BOOL("zhinxmin", RISCVCPU, cfg.ext_zhinxmin, false),
target/riscv: implement Zicbom extension Zicbom is the Cache-Block Management extension defined in the already ratified RISC-V Base Cache Management Operation (CBO) ISA extension [1]. The extension contains three instructions: cbo.clean, cbo.flush and cbo.inval. All of them must be implemented in the same group as LQ and cbo.zero due to overlapping patterns. All these instructions can throw a Illegal Instruction/Virtual Instruction exception, similar to the existing cbo.zero. The same check_zicbo_envcfg() is used to handle these exceptions. Aside from that, these instructions also need to handle page faults and guest page faults. This is done in a new check_zicbom_access() helper. As with Zicboz, the cache block size for Zicbom is also configurable. Note that the spec determines that Zicbo[mp] and Zicboz can have different cache sizes (Section 2.7 of [1]), so we also include a 'cbom_blocksize' to go along with the existing 'cboz_blocksize'. They are set to the same size, so unless users want to play around with the settings both sizes will be the same. [1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Signed-off-by: Christoph Muellner <cmuellner@linux.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230224132536.552293-4-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-24 16:25:35 +03:00
DEFINE_PROP_BOOL("zicbom", RISCVCPU, cfg.ext_icbom, true),
DEFINE_PROP_UINT16("cbom_blocksize", RISCVCPU, cfg.cbom_blocksize, 64),
DEFINE_PROP_BOOL("zicboz", RISCVCPU, cfg.ext_icboz, true),
DEFINE_PROP_UINT16("cboz_blocksize", RISCVCPU, cfg.cboz_blocksize, 64),
DEFINE_PROP_BOOL("zmmul", RISCVCPU, cfg.ext_zmmul, false),
DEFINE_PROP_BOOL("zca", RISCVCPU, cfg.ext_zca, false),
DEFINE_PROP_BOOL("zcb", RISCVCPU, cfg.ext_zcb, false),
DEFINE_PROP_BOOL("zcd", RISCVCPU, cfg.ext_zcd, false),
DEFINE_PROP_BOOL("zce", RISCVCPU, cfg.ext_zce, false),
DEFINE_PROP_BOOL("zcf", RISCVCPU, cfg.ext_zcf, false),
DEFINE_PROP_BOOL("zcmp", RISCVCPU, cfg.ext_zcmp, false),
DEFINE_PROP_BOOL("zcmt", RISCVCPU, cfg.ext_zcmt, false),
/* Vendor-specific custom extensions */
DEFINE_PROP_BOOL("xtheadba", RISCVCPU, cfg.ext_xtheadba, false),
DEFINE_PROP_BOOL("xtheadbb", RISCVCPU, cfg.ext_xtheadbb, false),
DEFINE_PROP_BOOL("xtheadbs", RISCVCPU, cfg.ext_xtheadbs, false),
DEFINE_PROP_BOOL("xtheadcmo", RISCVCPU, cfg.ext_xtheadcmo, false),
DEFINE_PROP_BOOL("xtheadcondmov", RISCVCPU, cfg.ext_xtheadcondmov, false),
DEFINE_PROP_BOOL("xtheadfmemidx", RISCVCPU, cfg.ext_xtheadfmemidx, false),
DEFINE_PROP_BOOL("xtheadfmv", RISCVCPU, cfg.ext_xtheadfmv, false),
DEFINE_PROP_BOOL("xtheadmac", RISCVCPU, cfg.ext_xtheadmac, false),
DEFINE_PROP_BOOL("xtheadmemidx", RISCVCPU, cfg.ext_xtheadmemidx, false),
DEFINE_PROP_BOOL("xtheadmempair", RISCVCPU, cfg.ext_xtheadmempair, false),
DEFINE_PROP_BOOL("xtheadsync", RISCVCPU, cfg.ext_xtheadsync, false),
DEFINE_PROP_BOOL("xventanacondops", RISCVCPU, cfg.ext_XVentanaCondOps, false),
/* These are experimental so mark with 'x-' */
DEFINE_PROP_BOOL("x-zicond", RISCVCPU, cfg.ext_zicond, false),
/* ePMP 0.9.3 */
DEFINE_PROP_BOOL("x-epmp", RISCVCPU, cfg.epmp, false),
DEFINE_PROP_BOOL("x-smaia", RISCVCPU, cfg.ext_smaia, false),
DEFINE_PROP_BOOL("x-ssaia", RISCVCPU, cfg.ext_ssaia, false),
DEFINE_PROP_BOOL("x-zvfh", RISCVCPU, cfg.ext_zvfh, false),
DEFINE_PROP_BOOL("x-zvfhmin", RISCVCPU, cfg.ext_zvfhmin, false),
DEFINE_PROP_BOOL("x-zfbfmin", RISCVCPU, cfg.ext_zfbfmin, false),
DEFINE_PROP_BOOL("x-zvfbfmin", RISCVCPU, cfg.ext_zvfbfmin, false),
DEFINE_PROP_BOOL("x-zvfbfwma", RISCVCPU, cfg.ext_zvfbfwma, false),
DEFINE_PROP_END_OF_LIST(),
};
target/riscv/cpu: set cpu->cfg in register_cpu_props() There is an informal contract between the cpu_init() functions and riscv_cpu_realize(): if cpu->env.misa_ext is zero, assume that the default settings were loaded via register_cpu_props() and do validations to set env.misa_ext. If it's not zero, skip this whole process and assume that the board somehow did everything. At this moment, all SiFive CPUs are setting a non-zero misa_ext during their cpu_init() and skipping a good chunk of riscv_cpu_realize(). This causes problems when the code being skipped in riscv_cpu_realize() contains fixes or assumptions that affects all CPUs, meaning that SiFive CPUs are missing out. To allow this code to not be skipped anymore, all the cpu->cfg.ext_* attributes needs to be set during cpu_init() time. At this moment this is being done in register_cpu_props(). The SiFive boards are setting their own extensions during cpu_init() though, meaning that they don't want all the defaults from register_cpu_props(). Let's move the contract between *_cpu_init() and riscv_cpu_realize() to register_cpu_props(). Inside this function we'll check if cpu->env.misa_ext was set and, if that's the case, set all relevant cpu->cfg.ext_* attributes, and only that. Leave the 'misa_ext' = 0 case as is today, i.e. loading all the defaults from riscv_cpu_extensions[]. register_cpu_props() can then be called by all the cpu_init() functions, including the SiFive ones. This will make all CPUs behave more in line with what riscv_cpu_realize() expects. This will also make the cpu_init() functions even more alike, but at this moment we would need some design changes in how we're initializing extensions/attributes (e.g. some CPUs are setting cfg options after register_cpu_props(), so we can't simply add the function to a common post_init() hook) to make a common cpu_init() code across all CPUs. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230113175230.473975-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-13 20:52:29 +03:00
/*
* Add CPU properties with user-facing flags.
*
* This will overwrite existing env->misa_ext values with the
* defaults set via riscv_cpu_add_misa_properties().
target/riscv/cpu: set cpu->cfg in register_cpu_props() There is an informal contract between the cpu_init() functions and riscv_cpu_realize(): if cpu->env.misa_ext is zero, assume that the default settings were loaded via register_cpu_props() and do validations to set env.misa_ext. If it's not zero, skip this whole process and assume that the board somehow did everything. At this moment, all SiFive CPUs are setting a non-zero misa_ext during their cpu_init() and skipping a good chunk of riscv_cpu_realize(). This causes problems when the code being skipped in riscv_cpu_realize() contains fixes or assumptions that affects all CPUs, meaning that SiFive CPUs are missing out. To allow this code to not be skipped anymore, all the cpu->cfg.ext_* attributes needs to be set during cpu_init() time. At this moment this is being done in register_cpu_props(). The SiFive boards are setting their own extensions during cpu_init() though, meaning that they don't want all the defaults from register_cpu_props(). Let's move the contract between *_cpu_init() and riscv_cpu_realize() to register_cpu_props(). Inside this function we'll check if cpu->env.misa_ext was set and, if that's the case, set all relevant cpu->cfg.ext_* attributes, and only that. Leave the 'misa_ext' = 0 case as is today, i.e. loading all the defaults from riscv_cpu_extensions[]. register_cpu_props() can then be called by all the cpu_init() functions, including the SiFive ones. This will make all CPUs behave more in line with what riscv_cpu_realize() expects. This will also make the cpu_init() functions even more alike, but at this moment we would need some design changes in how we're initializing extensions/attributes (e.g. some CPUs are setting cfg options after register_cpu_props(), so we can't simply add the function to a common post_init() hook) to make a common cpu_init() code across all CPUs. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230113175230.473975-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-13 20:52:29 +03:00
*/
static void riscv_cpu_add_user_properties(Object *obj)
{
Property *prop;
DeviceState *dev = DEVICE(obj);
2023-07-06 13:17:24 +03:00
#ifndef CONFIG_USER_ONLY
if (kvm_enabled()) {
kvm_riscv_init_user_properties(obj);
}
#endif
target/riscv: introduce riscv_cpu_add_misa_properties() Ever since RISCVCPUConfig got introduced users are able to set CPU extensions in the command line. User settings are reflected in the cpu->cfg object for later use. These properties are used in the target/riscv/cpu.c code, most notably in riscv_cpu_validate_set_extensions(), where most of our realize time validations are made. And then there's env->misa_ext, the field where the MISA extensions are set, that is read everywhere else. We need to keep env->misa_ext updated with cpu->cfg settings, since our validations rely on it, forcing us to make register_cpu_props() write cpu->cfg.ext_N flags to cover for named CPUs that aren't used named properties but also needs to go through the same validation steps. Failing to so will make those name CPUs fail validation (see c66ffcd5358b for more info). Not only that, but we also need to sync env->misa_ext with cpu->cfg again during realize() time to catch any change the user might have done, since the rest of the code relies on that. Making cpu->cfg.ext_N and env->misa_ext reflect each other is not needed. What we want is a way for users to enable/disable MISA extensions, and there's nothing stopping us from letting the user write env->misa_ext directly. Here are the artifacts that will enable us to do that: - RISCVCPUMisaExtConfig will declare each MISA property; - cpu_set_misa_ext_cfg() is the setter for each property. We'll write env->misa_ext and env->misa_ext_mask with the appropriate misa_bit; cutting off cpu->cfg.ext_N from the logic; - cpu_get_misa_ext_cfg() is a getter that will retrieve the current val of the property based on env->misa_ext; - riscv_cpu_add_misa_properties() will be called in register_cpu_props() to init all MISA properties from the misa_ext_cfgs[] array. With this infrastructure we'll start to get rid of each cpu->cfg.ext_N attribute in the next patches. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406180351.570807-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-06 21:03:35 +03:00
riscv_cpu_add_misa_properties(obj);
for (prop = riscv_cpu_extensions; prop && prop->name; prop++) {
qdev_property_add_static(dev, prop);
}
riscv: Allow user to set the satp mode RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-03 16:12:50 +03:00
#ifndef CONFIG_USER_ONLY
riscv_add_satp_mode_properties(obj);
#endif
}
static Property riscv_cpu_properties[] = {
DEFINE_PROP_BOOL("debug", RISCVCPU, cfg.debug, true),
#ifndef CONFIG_USER_ONLY
DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),
#endif
DEFINE_PROP_BOOL("short-isa-string", RISCVCPU, cfg.short_isa_string, false),
DEFINE_PROP_BOOL("rvv_ta_all_1s", RISCVCPU, cfg.rvv_ta_all_1s, false),
DEFINE_PROP_BOOL("rvv_ma_all_1s", RISCVCPU, cfg.rvv_ma_all_1s, false),
target/riscv: allow MISA writes as experimental At this moment, and apparently since ever, we have no way of enabling RISCV_FEATURE_MISA. This means that all the code from write_misa(), all the nuts and bolts that handles how to properly write this CSR, has always been a no-op as well because write_misa() will always exit earlier. This seems to be benign in the majority of cases. Booting an Ubuntu 'virt' guest and logging all the calls to 'write_misa' shows that no writes to MISA CSR was attempted. Writing MISA, i.e. enabling/disabling RISC-V extensions after the machine is powered on, seems to be a niche use. After discussions in the mailing list, most notably in [1], we reached the consensus that this code is not suited to be exposed to users because it's not well tested, but at the same time removing it is a bit extreme because we would like to fix it, and it's easier to do so with the code available to use instead of fetching it from git log. The approach taken here is to get rid of RISCV_FEATURE_MISA altogether and use a new experimental flag called x-misa-w. The default value is false, meaning that we're keeping the existing behavior of doing nothing if a write_misa() is attempted. As with any existing experimental flag, x-misa-w is also a temporary flag that we need to remove once we fix write_misa(). [1] https://lists.gnu.org/archive/html/qemu-devel/2023-02/msg05092.html Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20230222185205.355361-4-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-22 21:51:58 +03:00
/*
* write_misa() is marked as experimental for now so mark
* it with -x and default to 'false'.
*/
DEFINE_PROP_BOOL("x-misa-w", RISCVCPU, cfg.misa_w, false),
DEFINE_PROP_END_OF_LIST(),
};
static gchar *riscv_gdb_arch_name(CPUState *cs)
{
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
switch (riscv_cpu_mxl(env)) {
case MXL_RV32:
return g_strdup("riscv:rv32");
case MXL_RV64:
case MXL_RV128:
return g_strdup("riscv:rv64");
default:
g_assert_not_reached();
}
}
static const char *riscv_gdb_get_dynamic_xml(CPUState *cs, const char *xmlname)
{
RISCVCPU *cpu = RISCV_CPU(cs);
if (strcmp(xmlname, "riscv-csr.xml") == 0) {
return cpu->dyn_csr_xml;
} else if (strcmp(xmlname, "riscv-vector.xml") == 0) {
return cpu->dyn_vreg_xml;
}
return NULL;
}
#ifndef CONFIG_USER_ONLY
static int64_t riscv_get_arch_id(CPUState *cs)
{
RISCVCPU *cpu = RISCV_CPU(cs);
return cpu->env.mhartid;
}
#include "hw/core/sysemu-cpu-ops.h"
static const struct SysemuCPUOps riscv_sysemu_ops = {
.get_phys_page_debug = riscv_cpu_get_phys_page_debug,
.write_elf64_note = riscv_cpu_write_elf64_note,
.write_elf32_note = riscv_cpu_write_elf32_note,
.legacy_vmsd = &vmstate_riscv_cpu,
};
#endif
#include "hw/core/tcg-cpu-ops.h"
static const struct TCGCPUOps riscv_tcg_ops = {
.initialize = riscv_translate_init,
.synchronize_from_tb = riscv_cpu_synchronize_from_tb,
.restore_state_to_opc = riscv_restore_state_to_opc,
#ifndef CONFIG_USER_ONLY
.tlb_fill = riscv_cpu_tlb_fill,
.cpu_exec_interrupt = riscv_cpu_exec_interrupt,
.do_interrupt = riscv_cpu_do_interrupt,
.do_transaction_failed = riscv_cpu_do_transaction_failed,
.do_unaligned_access = riscv_cpu_do_unaligned_access,
.debug_excp_handler = riscv_cpu_debug_excp_handler,
.debug_check_breakpoint = riscv_cpu_debug_check_breakpoint,
.debug_check_watchpoint = riscv_cpu_debug_check_watchpoint,
#endif /* !CONFIG_USER_ONLY */
};
static bool riscv_cpu_is_dynamic(Object *cpu_obj)
{
return object_dynamic_cast(cpu_obj, TYPE_RISCV_DYNAMIC_CPU) != NULL;
}
static void cpu_set_mvendorid(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
bool dynamic_cpu = riscv_cpu_is_dynamic(obj);
RISCVCPU *cpu = RISCV_CPU(obj);
uint32_t prev_val = cpu->cfg.mvendorid;
uint32_t value;
if (!visit_type_uint32(v, name, &value, errp)) {
return;
}
if (!dynamic_cpu && prev_val != value) {
error_setg(errp, "Unable to change %s mvendorid (0x%x)",
object_get_typename(obj), prev_val);
return;
}
cpu->cfg.mvendorid = value;
}
static void cpu_get_mvendorid(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
bool value = RISCV_CPU(obj)->cfg.mvendorid;
visit_type_bool(v, name, &value, errp);
}
static void cpu_set_mimpid(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
bool dynamic_cpu = riscv_cpu_is_dynamic(obj);
RISCVCPU *cpu = RISCV_CPU(obj);
uint64_t prev_val = cpu->cfg.mimpid;
uint64_t value;
if (!visit_type_uint64(v, name, &value, errp)) {
return;
}
if (!dynamic_cpu && prev_val != value) {
error_setg(errp, "Unable to change %s mimpid (0x%" PRIu64 ")",
object_get_typename(obj), prev_val);
return;
}
cpu->cfg.mimpid = value;
}
static void cpu_get_mimpid(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
bool value = RISCV_CPU(obj)->cfg.mimpid;
visit_type_bool(v, name, &value, errp);
}
target/riscv/cpu.c: restrict 'marchid' value 'marchid' shouldn't be set to a different value as previously set for named CPUs. For all other CPUs it shouldn't be freely set either - the spec requires that 'marchid' can't have the MSB (most significant bit) set and every other bit set to zero, i.e. 0x80000000 is an invalid 'marchid' value for 32 bit CPUs. As with 'mimpid', setting a default value based on the current QEMU version is not a good idea because it implies that the CPU implementation changes from one QEMU version to the other. Named CPUs should set 'marchid' to a meaningful value instead, and generic CPUs can set to any valid value. For the 'veyron-v1' CPU this is the error thrown if 'marchid' is set to a different val: $ ./build/qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,marchid=0x80000000 qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.marchid=0x80000000: Unable to change veyron-v1-riscv-cpu marchid (0x8000000000010000) And, for generics CPUs, this is the error when trying to set to an invalid val: $ ./build/qemu-system-riscv64 -M virt -nographic -cpu rv64,marchid=0x8000000000000000 qemu-system-riscv64: can't apply global rv64-riscv-cpu.marchid=0x8000000000000000: Unable to set marchid with MSB (64) bit set and the remaining bits zero Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706101738.460804-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-06 13:17:23 +03:00
static void cpu_set_marchid(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
bool dynamic_cpu = riscv_cpu_is_dynamic(obj);
RISCVCPU *cpu = RISCV_CPU(obj);
uint64_t prev_val = cpu->cfg.marchid;
uint64_t value, invalid_val;
uint32_t mxlen = 0;
if (!visit_type_uint64(v, name, &value, errp)) {
return;
}
if (!dynamic_cpu && prev_val != value) {
error_setg(errp, "Unable to change %s marchid (0x%" PRIu64 ")",
object_get_typename(obj), prev_val);
return;
}
switch (riscv_cpu_mxl(&cpu->env)) {
case MXL_RV32:
mxlen = 32;
break;
case MXL_RV64:
case MXL_RV128:
mxlen = 64;
break;
default:
g_assert_not_reached();
}
invalid_val = 1LL << (mxlen - 1);
if (value == invalid_val) {
error_setg(errp, "Unable to set marchid with MSB (%u) bit set "
"and the remaining bits zero", mxlen);
return;
}
cpu->cfg.marchid = value;
}
static void cpu_get_marchid(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
bool value = RISCV_CPU(obj)->cfg.marchid;
visit_type_bool(v, name, &value, errp);
}
static void riscv_cpu_class_init(ObjectClass *c, void *data)
{
RISCVCPUClass *mcc = RISCV_CPU_CLASS(c);
CPUClass *cc = CPU_CLASS(c);
DeviceClass *dc = DEVICE_CLASS(c);
ResettableClass *rc = RESETTABLE_CLASS(c);
device_class_set_parent_realize(dc, riscv_cpu_realize,
&mcc->parent_realize);
resettable_class_set_parent_phases(rc, NULL, riscv_cpu_reset_hold, NULL,
&mcc->parent_phases);
cc->class_by_name = riscv_cpu_class_by_name;
cc->has_work = riscv_cpu_has_work;
cc->dump_state = riscv_cpu_dump_state;
cc->set_pc = riscv_cpu_set_pc;
hw/core: Add CPUClass.get_pc Populate this new method for all targets. Always match the result that would be given by cpu_get_tb_cpu_state, as we will want these values to correspond in the logs. Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> (target/sparc) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- Cc: Eduardo Habkost <eduardo@habkost.net> (supporter:Machine core) Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> (supporter:Machine core) Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org> (reviewer:Machine core) Cc: Yanan Wang <wangyanan55@huawei.com> (reviewer:Machine core) Cc: Michael Rolnik <mrolnik@gmail.com> (maintainer:AVR TCG CPUs) Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> (maintainer:CRIS TCG CPUs) Cc: Taylor Simpson <tsimpson@quicinc.com> (supporter:Hexagon TCG CPUs) Cc: Song Gao <gaosong@loongson.cn> (maintainer:LoongArch TCG CPUs) Cc: Xiaojuan Yang <yangxiaojuan@loongson.cn> (maintainer:LoongArch TCG CPUs) Cc: Laurent Vivier <laurent@vivier.eu> (maintainer:M68K TCG CPUs) Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> (reviewer:MIPS TCG CPUs) Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> (reviewer:MIPS TCG CPUs) Cc: Chris Wulff <crwulff@gmail.com> (maintainer:NiosII TCG CPUs) Cc: Marek Vasut <marex@denx.de> (maintainer:NiosII TCG CPUs) Cc: Stafford Horne <shorne@gmail.com> (odd fixer:OpenRISC TCG CPUs) Cc: Yoshinori Sato <ysato@users.sourceforge.jp> (reviewer:RENESAS RX CPUs) Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> (maintainer:SPARC TCG CPUs) Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (maintainer:TriCore TCG CPUs) Cc: Max Filippov <jcmvbkbc@gmail.com> (maintainer:Xtensa TCG CPUs) Cc: qemu-arm@nongnu.org (open list:ARM TCG CPUs) Cc: qemu-ppc@nongnu.org (open list:PowerPC TCG CPUs) Cc: qemu-riscv@nongnu.org (open list:RISC-V TCG CPUs) Cc: qemu-s390x@nongnu.org (open list:S390 TCG CPUs)
2022-09-30 20:31:21 +03:00
cc->get_pc = riscv_cpu_get_pc;
cc->gdb_read_register = riscv_cpu_gdb_read_register;
cc->gdb_write_register = riscv_cpu_gdb_write_register;
cc->gdb_num_core_regs = 33;
cc->gdb_stop_before_watchpoint = true;
cc->disas_set_info = riscv_cpu_disas_set_info;
#ifndef CONFIG_USER_ONLY
cc->sysemu_ops = &riscv_sysemu_ops;
cc->get_arch_id = riscv_get_arch_id;
#endif
cc->gdb_arch_name = riscv_gdb_arch_name;
cc->gdb_get_dynamic_xml = riscv_gdb_get_dynamic_xml;
cc->tcg_ops = &riscv_tcg_ops;
object_class_property_add(c, "mvendorid", "uint32", cpu_get_mvendorid,
cpu_set_mvendorid, NULL, NULL);
object_class_property_add(c, "mimpid", "uint64", cpu_get_mimpid,
cpu_set_mimpid, NULL, NULL);
target/riscv/cpu.c: restrict 'marchid' value 'marchid' shouldn't be set to a different value as previously set for named CPUs. For all other CPUs it shouldn't be freely set either - the spec requires that 'marchid' can't have the MSB (most significant bit) set and every other bit set to zero, i.e. 0x80000000 is an invalid 'marchid' value for 32 bit CPUs. As with 'mimpid', setting a default value based on the current QEMU version is not a good idea because it implies that the CPU implementation changes from one QEMU version to the other. Named CPUs should set 'marchid' to a meaningful value instead, and generic CPUs can set to any valid value. For the 'veyron-v1' CPU this is the error thrown if 'marchid' is set to a different val: $ ./build/qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,marchid=0x80000000 qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.marchid=0x80000000: Unable to change veyron-v1-riscv-cpu marchid (0x8000000000010000) And, for generics CPUs, this is the error when trying to set to an invalid val: $ ./build/qemu-system-riscv64 -M virt -nographic -cpu rv64,marchid=0x8000000000000000 qemu-system-riscv64: can't apply global rv64-riscv-cpu.marchid=0x8000000000000000: Unable to set marchid with MSB (64) bit set and the remaining bits zero Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706101738.460804-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-06 13:17:23 +03:00
object_class_property_add(c, "marchid", "uint64", cpu_get_marchid,
cpu_set_marchid, NULL, NULL);
device_class_set_props(dc, riscv_cpu_properties);
}
static void riscv_isa_string_ext(RISCVCPU *cpu, char **isa_str,
int max_str_len)
{
char *old = *isa_str;
char *new = *isa_str;
int i;
for (i = 0; i < ARRAY_SIZE(isa_edata_arr); i++) {
if (cpu->env.priv_ver >= isa_edata_arr[i].min_version &&
isa_ext_is_enabled(cpu, &isa_edata_arr[i])) {
new = g_strconcat(old, "_", isa_edata_arr[i].name, NULL);
g_free(old);
old = new;
}
}
*isa_str = new;
}
char *riscv_isa_string(RISCVCPU *cpu)
{
int i;
const size_t maxlen = sizeof("rv128") + sizeof(riscv_single_letter_exts);
char *isa_str = g_new(char, maxlen);
char *p = isa_str + snprintf(isa_str, maxlen, "rv%d", TARGET_LONG_BITS);
for (i = 0; i < sizeof(riscv_single_letter_exts) - 1; i++) {
if (cpu->env.misa_ext & RV(riscv_single_letter_exts[i])) {
*p++ = qemu_tolower(riscv_single_letter_exts[i]);
}
}
*p = '\0';
if (!cpu->cfg.short_isa_string) {
riscv_isa_string_ext(cpu, &isa_str, maxlen);
}
return isa_str;
}
static gint riscv_cpu_list_compare(gconstpointer a, gconstpointer b)
{
ObjectClass *class_a = (ObjectClass *)a;
ObjectClass *class_b = (ObjectClass *)b;
const char *name_a, *name_b;
name_a = object_class_get_name(class_a);
name_b = object_class_get_name(class_b);
return strcmp(name_a, name_b);
}
static void riscv_cpu_list_entry(gpointer data, gpointer user_data)
{
const char *typename = object_class_get_name(OBJECT_CLASS(data));
int len = strlen(typename) - strlen(RISCV_CPU_TYPE_SUFFIX);
qemu_printf("%.*s\n", len, typename);
}
void riscv_cpu_list(void)
{
GSList *list;
list = object_class_get_list(TYPE_RISCV_CPU, false);
list = g_slist_sort(list, riscv_cpu_list_compare);
g_slist_foreach(list, riscv_cpu_list_entry, NULL);
g_slist_free(list);
}
#define DEFINE_CPU(type_name, initfn) \
{ \
.name = type_name, \
.parent = TYPE_RISCV_CPU, \
.instance_init = initfn \
}
target/riscv: add TYPE_RISCV_DYNAMIC_CPU This new abstract type will be used to differentiate between static and non-static CPUs in query-cpu-definitions. All generic CPUs were changed to be of this type. Named CPUs are kept as TYPE_RISCV_CPU and will still be considered static. This is the output of query-cpu-definitions after this change for the riscv64 target: $ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio {"QMP": {"version": (...)} {"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}} {"return": {}} {"execute": "query-cpu-definitions"} {"return": [ {"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false}, {"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": true, "deprecated": false}, {"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false}, {"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false}, {"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": true, "deprecated": false}, {"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": true, "deprecated": false}, {"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": true, "deprecated": false} ]} Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230411183511.189632-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-11 21:35:11 +03:00
#define DEFINE_DYNAMIC_CPU(type_name, initfn) \
{ \
.name = type_name, \
.parent = TYPE_RISCV_DYNAMIC_CPU, \
.instance_init = initfn \
}
static const TypeInfo riscv_cpu_type_infos[] = {
{
.name = TYPE_RISCV_CPU,
.parent = TYPE_CPU,
.instance_size = sizeof(RISCVCPU),
.instance_align = __alignof__(RISCVCPU),
.instance_init = riscv_cpu_init,
.abstract = true,
.class_size = sizeof(RISCVCPUClass),
.class_init = riscv_cpu_class_init,
},
target/riscv: add TYPE_RISCV_DYNAMIC_CPU This new abstract type will be used to differentiate between static and non-static CPUs in query-cpu-definitions. All generic CPUs were changed to be of this type. Named CPUs are kept as TYPE_RISCV_CPU and will still be considered static. This is the output of query-cpu-definitions after this change for the riscv64 target: $ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio {"QMP": {"version": (...)} {"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}} {"return": {}} {"execute": "query-cpu-definitions"} {"return": [ {"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false}, {"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": true, "deprecated": false}, {"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false}, {"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false}, {"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": true, "deprecated": false}, {"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": true, "deprecated": false}, {"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": true, "deprecated": false} ]} Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230411183511.189632-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-11 21:35:11 +03:00
{
.name = TYPE_RISCV_DYNAMIC_CPU,
.parent = TYPE_RISCV_CPU,
.abstract = true,
},
DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_ANY, riscv_any_cpu_init),
#if defined(CONFIG_KVM)
DEFINE_CPU(TYPE_RISCV_CPU_HOST, riscv_host_cpu_init),
#endif
#if defined(TARGET_RISCV32)
target/riscv: add TYPE_RISCV_DYNAMIC_CPU This new abstract type will be used to differentiate between static and non-static CPUs in query-cpu-definitions. All generic CPUs were changed to be of this type. Named CPUs are kept as TYPE_RISCV_CPU and will still be considered static. This is the output of query-cpu-definitions after this change for the riscv64 target: $ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio {"QMP": {"version": (...)} {"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}} {"return": {}} {"execute": "query-cpu-definitions"} {"return": [ {"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false}, {"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": true, "deprecated": false}, {"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false}, {"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false}, {"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": true, "deprecated": false}, {"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": true, "deprecated": false}, {"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": true, "deprecated": false} ]} Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230411183511.189632-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-11 21:35:11 +03:00
DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE32, rv32_base_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_IBEX, rv32_ibex_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31, rv32_sifive_e_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34, rv32_imafcu_nommu_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34, rv32_sifive_u_cpu_init),
#elif defined(TARGET_RISCV64)
target/riscv: add TYPE_RISCV_DYNAMIC_CPU This new abstract type will be used to differentiate between static and non-static CPUs in query-cpu-definitions. All generic CPUs were changed to be of this type. Named CPUs are kept as TYPE_RISCV_CPU and will still be considered static. This is the output of query-cpu-definitions after this change for the riscv64 target: $ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio {"QMP": {"version": (...)} {"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}} {"return": {}} {"execute": "query-cpu-definitions"} {"return": [ {"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false}, {"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": true, "deprecated": false}, {"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false}, {"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false}, {"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": true, "deprecated": false}, {"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": true, "deprecated": false}, {"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": true, "deprecated": false} ]} Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230411183511.189632-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-11 21:35:11 +03:00
DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE64, rv64_base_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51, rv64_sifive_e_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54, rv64_sifive_u_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SHAKTI_C, rv64_sifive_u_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_THEAD_C906, rv64_thead_c906_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_VEYRON_V1, rv64_veyron_v1_cpu_init),
target/riscv: add TYPE_RISCV_DYNAMIC_CPU This new abstract type will be used to differentiate between static and non-static CPUs in query-cpu-definitions. All generic CPUs were changed to be of this type. Named CPUs are kept as TYPE_RISCV_CPU and will still be considered static. This is the output of query-cpu-definitions after this change for the riscv64 target: $ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio {"QMP": {"version": (...)} {"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}} {"return": {}} {"execute": "query-cpu-definitions"} {"return": [ {"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false}, {"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": true, "deprecated": false}, {"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false}, {"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false}, {"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": true, "deprecated": false}, {"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": true, "deprecated": false}, {"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": true, "deprecated": false} ]} Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230411183511.189632-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-11 21:35:11 +03:00
DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE128, rv128_base_cpu_init),
#endif
};
DEFINE_TYPES(riscv_cpu_type_infos)