will return consistent values. This helps with debug measurements for the time
being. Obviously we'll have to think of something different when we support
speed-stepping on models with frequency-dependent TSCs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30287 a95241bf-73f2-0310-859d-f6bbb57e9c96
theoretically write the given page.
* page writer: Fixed the incorrect check whether a temporary page can be
written by using the new CanWritePage().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30281 a95241bf-73f2-0310-859d-f6bbb57e9c96
bytes.
* strlcpy() isn't a particularly good string compare function.
* BDebugEventInputStream::_GetData():
- Also need to reset fBufferPosition to 0 when the buffer is empty.
- Fixed read position.
BDebugEventInputStream does now actually read the files written by
BDebugEventOutputStream.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30273 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reworked some of the transfer handling after reading the specs.
* Ensure that the device selection bit is set correctly for all commands.
* Generally disable interrupts and enable them only when expecting a DMA one.
* Renamed disk failure to device fault according to specs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30248 a95241bf-73f2-0310-859d-f6bbb57e9c96
system profiling interface and added classes BDebugEvent{Input,Ouput}Stream for
reading/writing those files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30244 a95241bf-73f2-0310-859d-f6bbb57e9c96
passed in a structure now, so it is easier to extend it and ignore unused
parameters.
* One can now select which system profiling events one is interested in.
* Added scheduling events to the system profiling interface. Those are pretty
much the ones recorded when scheduler tracing is enabled. Still missing are
the "wait object" events that allow to interpret what a thread is waiting
for.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30243 a95241bf-73f2-0310-859d-f6bbb57e9c96
input_server filter if the screen saver should be run could be confused if
additional option flags were turned on. I've removed the SAVER_DISABLED
definition completely. Also, I renamed the confusing "fEnabled" member, which
really means "saver already running".
Thanks a lot! Fixes ticket #3474.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30207 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointed out, there is also an unsolvable race condition with BFS that other
file systems should share.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30204 a95241bf-73f2-0310-859d-f6bbb57e9c96
profiling events.
* profile: Avoid using get_{team,thread}_info() in common code paths. The
system profiling mode is asynchronous, so the team or thread in question
could already be gone.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30193 a95241bf-73f2-0310-859d-f6bbb57e9c96
debug context now. That's all it needs.
* Added the option "-a" to the profile command line tool. It triggers profiling
of the whole system. There are still some issues, particularly image related
ones.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30129 a95241bf-73f2-0310-859d-f6bbb57e9c96
methods that used an "event mask" field. There was no need to introduce
a "flags" field for the same purpose.
* Renamed protected DefaultNotificationService methods (removed "_" prefix).
* Adjusted the code providing a notification service accordingly.
* Changed the event message several notification services generated by renaming
the "opcode" field to "event".
* Implemented the TEAM_ADDED event and also added a TEAM_EXEC event.
* Added notifications for threads and images.
* Added visitor-like iteration functions for teams, threads, and images.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30126 a95241bf-73f2-0310-859d-f6bbb57e9c96
headers/private/shared is newer, though with small interface changes.
* Removed the unnecessary Debug.h include in
headers/private/shared/ObjectList.h.
* Adjusted sources using these headers, mostly by adding missing includes.
* Lots of automatic whitespace cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30123 a95241bf-73f2-0310-859d-f6bbb57e9c96
removed it from the public namespace, and made it only visible when linking.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30071 a95241bf-73f2-0310-859d-f6bbb57e9c96
for binary compatibility).
* Always round the bar thickness, or we get drawing artefacts.
* Cleaned up the header following our coding style.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30070 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the BParameterWeb::{Start|Stop}Watching() methods again, as the same
thing can be achieved using the BMediaRoster already (even though it doesn't
seem to work yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30058 a95241bf-73f2-0310-859d-f6bbb57e9c96
but doesn't really do anything more than before.
* It also replaces everything IDE with ATA counterparts and cleans up a lot
of the definitions.
* Cleaning up the old ATA bus_manager as well as some license headers missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30049 a95241bf-73f2-0310-859d-f6bbb57e9c96
as on Dano - since the functionality is already there, those two functions
aren't really needed, though, so we could remove them again.
* Cleaned up DataExchange.h, and added basic reply/request structs for anything
that needs an area.
* BControllable now uses a helper class ReceiveTransfer to deal with requests
with areas.
* Major style cleanup of MediaRoster.cpp, though one could still bury some
hours there...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30045 a95241bf-73f2-0310-859d-f6bbb57e9c96
stubs.
* However, without a working Dano at hand, I can't really implement something
compatible, so I'll postpone this to some later point.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30030 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adapted and cleaned up ParameterWeb.cpp.
* Fixed some copy&paste bugs in the BTextParameter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30029 a95241bf-73f2-0310-859d-f6bbb57e9c96
* renamed _FindXXXWordBoundary() methods to _Previous/_NextWordBoundary()
since the respective per-char methods are named this way
* started to work on improving the behaviour of page-up/page-down
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30012 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This fixes the problem when a socket changes something with regards to its
parent.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30000 a95241bf-73f2-0310-859d-f6bbb57e9c96
* reverted my recent change that caused Mail to always show the end
of mails 8-) and now invoke ScrollToOffset() wherever it was missing
(mostly in keyboard-related methods)
* _DoInsertText() only moves the caret if the text has been inserted
in front of the caret, not after it
* overhauled selection by char/word/line and their extension mechanism
(which now behaves as the haiku shell)
* use strnlen() instead of strlen() in those versions of Insert() which
accept a length parameter, as strlen can potentially waste a lot of
cycles skipping the whole string, when all we want is to clamp the length.
* cleanup (some of it automatic removal of trailing whitespace)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29995 a95241bf-73f2-0310-859d-f6bbb57e9c96
better, though :-)
* Also fixed a mixup of the unintuitive argument order of our
atomic_test_and_set(); I guess I will change that sooner or later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29994 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed DoublyLinkedList::Size() to Count(), since it actually counts the
items (ie. O(n)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29979 a95241bf-73f2-0310-859d-f6bbb57e9c96
* optimized unmapping of a single page that was rather inefficient
for large areas
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29978 a95241bf-73f2-0310-859d-f6bbb57e9c96
kits/shared since i plan to use it in other places like Tracker. Animated replicants like
ActivityMonitor wont stall anymore when initiating the drag. (On the desktop, Tracker's mouse
tracking still busy loops sometimes, that's next on my list).
I had asynchronous long click detection (one button mouse support) in it but decided to get rid of
it, it adds unneeded complexity in the code and is even getting in your way sometimes (ex: now you can
take your time to drag the dragger, you wont be interrupted). If we want to reimplement that
someday it should be done system wide anyway (only Tracker and replicants have that 'feature'
AFAIK).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29972 a95241bf-73f2-0310-859d-f6bbb57e9c96
we request the drawing via Invalidate() - this make use of the app-server's
potential double buffering, whenever that is active. This change reduces
flickering in VESA mode considerably.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29962 a95241bf-73f2-0310-859d-f6bbb57e9c96
custom provided one. Incidentally makes #1775 (that i'll reopen in a moment, see r29947) a
lot less likely to happen for most users since it can now only happen with those
customized popups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29949 a95241bf-73f2-0310-859d-f6bbb57e9c96
the protocoll less prone to errors, reduces possible points of failure and
most importantly, reduces the number of function calls to the link API.
I only know the numbers for StrokeLine(), which I tested via the Benchmark
test app. With this change, drawing random colored and positioned lines
actually doubled in speed. On the BView side, the calls to
ServerLink::Attach() only halfed, while on the app_server side, the number
of calls to ServerLink::Read() is now 1/4th. It will also be worth
investigating why the link stuff is so slow at all. I also optimized
BView::DrawString() a lot in this change, but I don't have any numbers
yet. Some other commands which used multiple Attach()/Read() calls were
also optimized, at least the most important ones. Begin/EndLineArray() was
also pretty bad on the app_server side.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29937 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the TimeZoneView less error prone, and also actually use Haiku code (the
previous check didn't work since it used #if, not #ifdef).
* Also took the liberty to rename our boot loader to haiku_loader, since I had
to update the nasm binary anyway. Updated the assembly sources to nasm 2.0.
* I haven't found where the synth location in the MIDI code is specified,
though.
* Also, NetBootArchive, and FloppyBootImage haven't been updated yet. Will do
so next.
* Some optional packages still put their license to beos/etc/licenses. I didn't
update them yet, as we'll probably do so anyway at some point. Also, I think
we might want to introduce a common/data/licenses instead for those.
* If you encounter any problems, please tell!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29876 a95241bf-73f2-0310-859d-f6bbb57e9c96
the current thread, now. Implemented by introducing a new base class
KernelRequest which has respective attributes.
* Server: RequestThreadContext does now also save the request that is being
processed. Furthermore some space has been reserved for file system specific
data, which can be initialized by the new
FileSystem::InitRequestThreadContext().
* FUSE library: Implemented fuse_get_context() using the new
RequestThreadContext feature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29872 a95241bf-73f2-0310-859d-f6bbb57e9c96
on screen (ie including the decorator border and tab). Plus the necessary
refactoring as well as some TODO notes about windows with the tab on the left
side.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29820 a95241bf-73f2-0310-859d-f6bbb57e9c96
(mostly at least). Also disables -Werror for the binutils, but those should
be fixed eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29804 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add some more operator
* adjust some functions to behave properly an invalid values
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29792 a95241bf-73f2-0310-859d-f6bbb57e9c96
an existing background. It's not supported by many frame types yet, but BButton
and TextControl frames work as well as the soft recessed frame which many
controls use.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29762 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved the bit in order not to clash with the tile options.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29754 a95241bf-73f2-0310-859d-f6bbb57e9c96
FreeBSD version (r188928). Note to JiSheng: I did have to fix fwcontrol.c line
111, looked like a last minute change to me.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29752 a95241bf-73f2-0310-859d-f6bbb57e9c96
newly created dir. The VFS really doesn't need it and for some file systems
it might not be easy to get by. Several file systems (e.g. rootfs and fat)
were ignoring the parameter anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29719 a95241bf-73f2-0310-859d-f6bbb57e9c96
which makes the resessed frame blend better with the surroundings. This can
be seen best in Keymap, where a different color is set on some buttons, but
the resessed frame should still be the same across all those buttons.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29716 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fix broken Time_t function
* take the missing days into account when adding months
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29713 a95241bf-73f2-0310-859d-f6bbb57e9c96
light-weight read-write lock, that doesn't use a semaphore itself. Locking
and unlocking has to be done via methods of RWLockManager. This combo allows
lots of locks without risking to hit the semaphore limit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added AutoLocker constructor with the locking strategy as parameter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29685 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed dead code which was for drawing a BButton like R5.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29677 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Add support for reading the size of internals buffers of the bt chips
- Add support for Resetting the Device
- Add broadcom vendor command fro writting the bdaddr
- clean up the debug output
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29669 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _InitMenuBar() had the meaning of fixedSize reversed. The layout-mode
constructors pass fixedSize = true accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29664 a95241bf-73f2-0310-859d-f6bbb57e9c96
result in the BMenuField not always drawing all of the frame around the
menu bar correctly, for example cutting off at left for divider = 0.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29660 a95241bf-73f2-0310-859d-f6bbb57e9c96
ported software:
* If the macro B_USE_POSITIVE_POSIX_ERRORS is defined the POSIX error code
constants (ENOMEM, EINTR,...) will have positive values.
* Introduced the macros B_TO_{POSITIVE,NEGATIVE}_ERROR() which do convert a
given error code to a positive/negative value.
* Added static library libposix_error_mapper.a that overrides all POSIX
functions (save the ones I forgot to add :-)) directly meddling with error
codes (having them as parameter or returning them) dealing with the
positive<->negative error code conversions. The functions have hidden
visibility, so they affect only the shared object they are linked into.
* So ideally all one has to do is to build a ported software with
-DB_USE_POSITIVE_POSIX_ERRORS and -lposix_error_mapper and be good with
respect to error code problems.
* Potential issues:
- When mixing ported and Haiku native code, i.e. using Haiku native code in
a ported software or using a ported library in a Haiku native application
care must be taken to convert error codes where the two interface. That's
what the B_TO_{POSITIVE,NEGATIVE}_ERROR() macros are supposed to be used
for.
- A ported static library can obviously not be linked directly against
-lposix_error_mapper. The shared object linking a against the ported static
library has to do that. The previous point applies when that causes mixing
with Haiku native code.
- When dependent ported libraries are used probably all of them should use
the error mapping.
Comments welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29653 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Implement mechanism GetProperty to retrieve detailed information about the LocalDevice
- Generic BluetoothDevice interface changed and adapted
- Implement ReadLocalVersion to be aware of the bluetooth specification supported by our localdevice
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29639 a95241bf-73f2-0310-859d-f6bbb57e9c96
flags would not tell anything, since B_SINGLE_LAUNCH equals 0.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29636 a95241bf-73f2-0310-859d-f6bbb57e9c96
TODO: Adjust BScrollBar to use it.
TODO: Make it virtual like the others, but I don't want to break Vision and
other native Haiku apps just now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29630 a95241bf-73f2-0310-859d-f6bbb57e9c96
device additions/removals can be monitored.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29582 a95241bf-73f2-0310-859d-f6bbb57e9c96
We do some caching using a hash table indexed by the operations vector.
* Pass the vnode capabilities to the kernel module.
* In the kernel tailor the operation vectors for volumes and vnodes passed to
the VFS according to the respective capabilities. This way those vectors look
pretty much like those from the client FS. This saves unnecessary calls when
hooks are not implemented and should also fix compatibility problems in cases
where not implementing a hook and returning an error don't mean the same to
the VFS.
* Inlined some of the kernel module Volume class getters.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29572 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Send() now also gets the message to send as parameter.
- Added methods to reserve and unreserve space in the buffer.
* RequestAllocator: Uses the port buffer reservation methods now. This allows
to let more than one RequestAllocator use a Port in a stack-like manner.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29565 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Change Port::Receive() semantics. It does no longer use the buffer associated
with the object. Instead it allocates heap memory for the caller. Since
there's only one caller who clones the message anyway, we save one copy this
way (though we have an additional syscall in userland) and don't overwrite
a request being prepared for sending.
* Changed RequestAllocator::ReadRequest() to also read the request from the
port.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29563 a95241bf-73f2-0310-859d-f6bbb57e9c96
the header is used for compiling with -std=c99 or -std=gnu99 and GCC4, which
has a reverted meaning of "extern inline" (now standard compliant).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29558 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pass the request offset and length with the DoIORequest. This allows us to
already get the first vecs for do_iterative_fd_io() in userland, saving a
trip back and forth.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29546 a95241bf-73f2-0310-859d-f6bbb57e9c96
implementations that can be used by subsystems that want to have a pretty
standard service. Only the latter is really complete, though.
* The notification manager is now available earlier in the boot process.
* Added notifications to teams/ports (only add/remove).
* The network notification implementation is now using the
DefaultUserNotificationService.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29543 a95241bf-73f2-0310-859d-f6bbb57e9c96
part.
* Implemented a good part of the kernel part for the support of
do_iterative_fd_io(). The forwarding of the callbacks are missing yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29540 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Add strings for all bluetooth manufacturers
- Add a bunch of strings for each command
- Add methods to get string given a manufacturer code or a command code
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29526 a95241bf-73f2-0310-859d-f6bbb57e9c96
an on-stack structure for the request in a hash table when forwarding the
io() hook. Create a new object (HaikuKernelIORequest) instead and store it
in a hash table in HaikuKernelFileSystem.
* Some work on the userland side of do_iterative_fd_io().
* Added some missing requests in UserlandFSUtil::is_{kernel,userland}_request().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29505 a95241bf-73f2-0310-859d-f6bbb57e9c96
can be checked.
* Make the usb_keyboard module check the presence of the needed debugger
commands to avoid the error messages in case of them being unavailable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29472 a95241bf-73f2-0310-859d-f6bbb57e9c96
GCC 4.3 and above (conforming to the standard when compiled with -std=c99
or -std=gnu99), define the inline functions as "static inline". I've had
another patch that maintains the previous behavior, but as titer pointed
out, we have no code in our repo that overrides the inlined functions
with their own version, and doing so for any other code would be
problematic, since for example Linux libio.h #defines these as macros.
In any case, I don't really know what I am doing, so please correct me
if I did something stupid! :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29471 a95241bf-73f2-0310-859d-f6bbb57e9c96
IORequest.{h,cpp}.
* Introduced public <io_requests.h> header. Currently it only declares the
single function BFS uses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29446 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved new statics to the cpp file as it seems we don't usually expose such internals in our public headers
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29443 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Don't delete fStream if we don't own it, would crash ShelfTest on quit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29439 a95241bf-73f2-0310-859d-f6bbb57e9c96
HashMap and HashSet classes to use the kernel utils OpenHashTable instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29429 a95241bf-73f2-0310-859d-f6bbb57e9c96
RecursiveLock in the kernel.
* Several adjustments according to UserlandFS header changes.
* Re-added reiserfs to image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29410 a95241bf-73f2-0310-859d-f6bbb57e9c96
file cache are missing yet -- requires some refactoring in Volume.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29402 a95241bf-73f2-0310-859d-f6bbb57e9c96
/system/servers, now.
* Got rid of the dispatcher application. It was the entity the kernel module
talked to when mounting a yet unknown FS. It started the client FS server
applications. Now the kernel module starts them directly. They use
respectively named ports, so the kernel module can find them when already
running.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29377 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The I/O context related vfs_*() functions have io_context* instead of void*
parameters/return values, now.
* vfs_new_io_context(): Lock the parent I/O context before getting its table
size. Otherwise the table size could change until we do.
* vfs_resize_fd_table(): Fixed use of MutexLocker. We created only a temporary
object, not one with function scope.
* Renamed load_image_etc() to load_image_internal() and added a parameter for
specifying the parent team of the one to create.
* Introduced a kernel private load_image_etc() with a few more arguments than
load_image().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29375 a95241bf-73f2-0310-859d-f6bbb57e9c96
at a time is supported and volume as well as start time are not taken into
account. For reasons I don't feel like investigating right now all the
BMediaTrack calls in the BTrackReader end up as pure virtual function calls
though, so it's unusable for now.
* Fix leaking the temporary buffer in BSound.
* Whitespace cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29374 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Split the FSCapabilities bit mask into three bit masks for the FS, the
volume, and the vnodes, since we have three independent FS interface
structures, now. The latter is not supported in the kernel add-on, yet.
* Server:
- Temporarily removed some things from the build (the BeOS interface
and the cache implementations).
- Some WIP in HaikuKernelVolume and [haiku_]kernel_emu.{h,cpp}.
- Added HaikuKernelNode, which wraps fs_vnode for the client FS.
The server is still quite a bit away from being buildable again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29323 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel module compiles again, though newer features like VM file support,
asynchronous I/O, and FS layers aren't supported yet. The userland code is
still completely out of sync and won't even compile.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29318 a95241bf-73f2-0310-859d-f6bbb57e9c96
stored now.
* Extended the debugger message for B_DEBUGGER_MESSAGE_HANDED_OVER by the
causing thread.
* Also send B_DEBUGGER_MESSAGE_HANDED_OVER to the debugger to which the team
was handed over. The message will be the very first one the debugger gets
from the team in question.
* Some harmless refactoring (added thread_hit_serious_debug_event()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29302 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added debugger commands to resolve usb_ids to pipes.
* Adjusted the physical memory allocator to be usable in a slimmed down mode
when running inside the kernel debugger.
* Implemented USB keyboard support for KDL through a kernel debugger add-on.
* Added kgetc() and made use of it where previously individual methods were used
to ensure that reading characters always goes through the kernel debugger
add-ons and the other methods.
This has some preconditions to meet though:
1) The keyboard must be in the boot protocol (currently the case but needs to
be revisited once we have a full usb_hid).
2) The keyboard must be attached to a UHCI root port (i.e. not use EHCI or OHCI,
also not through hubs unless those are USB 1.1).
3) the usb_hid driver has to be opened for this to work. This means that for the
time between initializing USB and when usb_hid is opened by the input_server
there is no keyboard support.
Also note that this has no way of detecting hot-plug, meaning that you can't
re-attach your USB keyboard from the hub to the root port once in KDL.
On the bright side of things, since this is a non-destructive mechanism it is
possible to enter and leave KDL without loosing the USB state.
Tested OK in QEMU, not tested on real hardware yet, will see in a few minutes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29291 a95241bf-73f2-0310-859d-f6bbb57e9c96
needed at all when used as intended. Thanks Ingo for the explanation on how this
is intended to work. Adjusted the overlay fs accordingly and updated/reverted
the changes to the other filesystems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29250 a95241bf-73f2-0310-859d-f6bbb57e9c96
been mounted. This is to allow layered filesystems to setup internal data that
requires all the sub/super volumes to be available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29248 a95241bf-73f2-0310-859d-f6bbb57e9c96
It causes the interrupt handler to be inserted at the very end of the list
instead of at the top. It is intended to be used as a workaround when a
interrupt handler cannot know if it actually handled the interrupt. This
should never be used by native drivers. Also if we know that the result is
not valid because of this flag we won't disable the vector in case we count
many unhandled interrupts as those numbers are then unreliable.
* Moved B_NO_LOCK_VECTOR to be a private flag as well.
* Made the interrupt handler list a simple manually maintaned singly linked list
instead of the doubly linked one used with insque and remque as it greatly
simplifies things for such an easy use case and is more compact.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29241 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fixed a typo in method name.
Please forgive me Stephan if I just screw your next commit...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29240 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Softer recessed frame for BMenuField to distinguish more from BButton
and make it slightly more similar to BTextControl.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29235 a95241bf-73f2-0310-859d-f6bbb57e9c96
overheard that they looked too ninety-ish.
TODO: The code behind this is work in progress. The basic idea
is to extract all drawing code into a new class BControlLook,
of which there is a global instance be_control_look, instantiated
in InterfaceDefs.cpp. At the moment, all the old drawing code is
still there, and the usage of be_control_look is inside if-bodies
checking the instance against NULL. In another words, by not
instanitating be_control_look, you can revert back to the old look.
BControlLook's job is to provide reusable methods for drawing
certain types of frames, backgrounds and labels, so that application
developers can make controls that re-use the same drawing code
as built-in controls and adopt to changes made there. I have added
the notion of "borders". Each of the frame drawing methods can be
made to draw certain borders only, which is supposed to help when
controls shall visually attach. This feature is not fully explored
at all ATM.
TODO: Update BColumnListView header view and BStringItem text
spacing. Update other apps where it makes sense to use BControlLook.
For the moment, only Tracker and LaunchBox are updated. More...
NOTE: The new look is not very radically different, so that existing
apps do not immediately look too ugly or out of place.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29221 a95241bf-73f2-0310-859d-f6bbb57e9c96
Renamed BGradient::color_step to BGradient::ColorStop
as it's called everywhere else. Also renamed BGradient::gradient_type
to just BGradient::Type. Renamed BGradient::Type() to GetType().
* Simplification of method names in Painter.cpp. Some not yet
complete and yet inactive code to accelerate vertical gradients
(bypassing AGG for this special case).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29214 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove the previous method of applying the overlay by flags. In the future the
overlay can just be mounted as a filesystem layer. This is probably how layers
were intended to work in the first place.
* Move the filesystem module info and filesystem name from the fs_mount to the
fs_volume structure. Filesystem layering is done by having multiple layered
volumes and we want to be able to have a different fs per layer.
* Adapt VFS code to this move.
* Implement mounting layered filesystems. Specifying multiple filesystems
separated by a colon on mount will cause the layers to be set up and the
corresponding filesystems to be mounted at that layer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29199 a95241bf-73f2-0310-859d-f6bbb57e9c96
node. That is needed for a layered filesystem to be able to construct a full
fs_vnode out of a volume/inode pair.
* Adapt places where get_vnode is used. Sadly this is a C API and we can't just
use a default NULL for that argument.
* Introduce a flag B_VNODE_WANTS_OVERLAY_SUB_NODE that can be returned in the
flags field of a fs get_vnode call. A filesystem can use this flag to indicate
that it doesn't support the full set of fs features (attributes, write support)
and it'd like to have unsupported calls emulated by an overlay sub node.
* Add a perliminary overlay filesystem that emulates file attributes using files
on a filesystem where attributes aren't supported. It does currently only
support reading attributes/attribute directories though. All other calls are
just passed through to the super filesystem.
* Adjust places where a HAS_FS_CALL() is taken as a guarantee that the operation
is supported. For the overlay filesystem we may later return a B_UNSUPPORTED,
so make sure that in that case proper fallback options are taken.
* Make the iso9660 filesystem request overlay sub nodes. This can be fine tuned
later to only trigger where there are features on a CD that need emulation
at all.
If you happened to know the attribute file format and location you could build
an iso with read-only attribute support now. Note that this won't be enough to
get a bootable iso-only image as the query and index support is yet missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29177 a95241bf-73f2-0310-859d-f6bbb57e9c96
support _POSIX_VDISABLE at all. It's even questionable whether the value
(unsigned char)-2 is a good choice.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29137 a95241bf-73f2-0310-859d-f6bbb57e9c96
add the const in any case. As Axel points out these are C functions and we do
not affect binary compatibility by changing their signature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29124 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enable -Werror on GCC4 builds as well (limited to the same selected targets).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29118 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Replaced the use of offsetof() for structs that aren't PODs. Add a
offset_of_member() macro to util/khash.h because that's what it's used for
in our cases.
* Change the signature of add_debugger_command()/remove_debugger_command() on
GCC > 2 to avoid the depricated conversion from string constants to char *.
* Adding some "suggested" parenthesis. I know that not everyone likes that, but
it pointed out at least one bug that is fixed here as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29113 a95241bf-73f2-0310-859d-f6bbb57e9c96
* DoLayout did not work as expected, after the call
the scrollbars would have an 1px offset inside the target
* the target needs to be resized while setting a new border, otherwise
it would overlap the border and give some drawing artefacts
- I'm still unsure if the behavior change introduced with the layout stuff is nice
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29103 a95241bf-73f2-0310-859d-f6bbb57e9c96
- This means that buffers with a initial size of 0 work now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29006 a95241bf-73f2-0310-859d-f6bbb57e9c96
build. I sure hope that this doesn't break the build for anyone else.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28992 a95241bf-73f2-0310-859d-f6bbb57e9c96
bug #2237. Thanks!
* Cleaned up the file a bit (removed the _P() and fixed indentation).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28961 a95241bf-73f2-0310-859d-f6bbb57e9c96
register. Therefore "cc" should be added to the clobber list. Adding that here
as it's part of a patch attached to the freetype bugtracker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28945 a95241bf-73f2-0310-859d-f6bbb57e9c96
constraint, so I replaced it with a "d" input and "=d" output constraint
instead, which should be equivalent. Please yell if my logic is flawed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28944 a95241bf-73f2-0310-859d-f6bbb57e9c96
- This has the side effect that now it actually works.
- This also indirectly fix BNetEndpoint usage of BNetBuffer.
- Added DynamicBuffer (the underlying buffer implementation) to the Jamfile.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28928 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Default buffer size is now set to 1 instead of 0, which would cause the
construction without a given size to fail.
- Added copy constructor.
- Changed _GrowToFit() to have a boolean parameter to indicate if we want
to resize the buffer to an exact size. Used by the copy constructor.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28924 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Will be used by the new (R5 compatible) NetBuffer class.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28918 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is a very welcome addition.
* There are a few issues, and maybe questionable decisions (like the dependence
on ACPI), but I see no reason why it shouldn't be added in its current form
already.
* Unfortunately, I could not test it yet, though, as the CPU of my laptop is
not supported; will see if I can find a supported hardware, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28903 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implementing dirname and basename
I removed dirname from glibc/misc and reimplemented in order
to (hopefully) keep thing tidy.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28888 a95241bf-73f2-0310-859d-f6bbb57e9c96
* whitespace cleanup, etc
* some renaming to fit Haiku style
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28856 a95241bf-73f2-0310-859d-f6bbb57e9c96
old invalid user listeners yet, though (ie. if a team dies).
* Implemented userland network monitor functions.
* Added a few notifications to the network stack, even though this part isn't
complete yet (especially notify_interface_changed()).
* Added optional debug output to the notifications module.
* Added the module to the image, it basically works now (tested).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28825 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Implement DeviceClass for easy analisys of discovered devices's type.
- Make harder the intantiation of RemoteDevices.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28809 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Compiles, but doesn't work at all yet. For those who wonder: the networking
notifications are put into a separate module, so that the network stack can
be unloaded without losing connection, IOW user applications will continue
to retrieve notifications when the stack is loaded again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28790 a95241bf-73f2-0310-859d-f6bbb57e9c96
now resize with the tab view. There is probably a more elegant way overriding
DoLayout(), but this should do for the time being.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28706 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The BTabView can now be used with layout management. In this setup, children
views are managed by a BCardLayout and are hidden/shown instead of removed/
added when (de)activated.
Thanks a lot!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28701 a95241bf-73f2-0310-859d-f6bbb57e9c96
broke everything. If the added item has no chance to calculate it's height,
_RecalcItemTops() won't work of course. Whatever this was supposed to fix,
there has to be a correct way.
* Override BView::SetFont() to update all the items. I remember wanting to
implement this, that's why I refactored a _FontChanged() method, but I
obviousy never did...
* Moved the AttachedToWindow() and FrameMoved() implementations to a more
logical position in the file.
* Implement B_PAGE_UP/DOWN key presses. Don't know if that's what the BeOS
implementation did, will check later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28671 a95241bf-73f2-0310-859d-f6bbb57e9c96
a message.
* The DesktopSettings class is now using that to send the new
AS_SYSTEM_FONT_CHANGED message to all windows.
* The ServerWindow now propagates font changes to its decorator, causing it
to update its drawing. That means changing the bold font in the "Fonts"
preferences application will instantly change all window titles.
* Factored out a _RebuildAndRedrawAfterWindowChange() out of several Desktop
methods, simplifying some code.
* The DefaultDecorator no longer calls _DoLayout() twice (through SetLook()),
but instead calls the new _UpdateFont() method now also called by
FontsChanged(), and SetLook().
* BWindow::GetDecoratorSettings() now also includes "tab frame" BRect with the
exact footprint of the tab, allowing apps to know the size of the tab to
position itself accordingly.
* Automatic white space cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28664 a95241bf-73f2-0310-859d-f6bbb57e9c96
it to the stream. This caused Read()/Write() to need two syscalls for nothing
(this only caused the actual stream to share the same position with the
BBufferIO, something you just cannot rely on when using buffered I/O).
* Anyway, this reduces the time VirtualBox needs to open some RAW test images
from over 4 minutes to less than 15 seconds...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28662 a95241bf-73f2-0310-859d-f6bbb57e9c96
the libiconv that was available for R5
* cleaned up iconv.h
* moved public libiconv headers (iconv.h and localcharset.h) into a
specific folder in headers/libs
* renamed config.h to libiconv_config.h in order to circumvent strange
problems with regex.c from glibc picking it up
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28630 a95241bf-73f2-0310-859d-f6bbb57e9c96
the endian doesn't matter for them. While I consider code that relies on this
as broken (as they don't follow the standard), it doesn't hurt, anyway; this
closes ticket #3121.
* Header cleanup, added license.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28625 a95241bf-73f2-0310-859d-f6bbb57e9c96
Make sure the comments are C style in headers that are included by POSIX
headers.
Thanks! Should fix#2870.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28598 a95241bf-73f2-0310-859d-f6bbb57e9c96
the per-root-image breadth-first sorted image array. Instead we have a
per-image hook function to resolve the symbols. The default function
uses the sLoadedImages list directly, which is breadth-first sorted
anyway. There's also a BeOS function for old-style symbol resolution
and one for add-ons, which lacks a proper implementation yet (just
uses old-style ATM).
* Made the dl*() functions POSIX compliant:
- dlopen() does no longer use load_add_on(), but loads the object as a
library. It also properly supports a NULL name, now -- the previous
"_APP_" work-around did only work, if this soname was set on the
program (unlikely for programs using this API).
- Implemented RTLD_{GLOBAL,LOCAL}.
- dlsym() looks up symbols properly now, i.e. not just in the given
image, but breadth-first for an actual image or in load order for
the global scope. It also supports the not-quite POSIX RTLD_DEFAULT
and RTLD_NEXT extensions. Our RTLD_NEXT finds more symbols than in
Linux (also in later dlopen()ed libraries), but that should be fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28568 a95241bf-73f2-0310-859d-f6bbb57e9c96
class/namespace. Renamed the B_GRADIENT_* types to TYPE_* as the context
is already given.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28564 a95241bf-73f2-0310-859d-f6bbb57e9c96
gWidthBuffer.
* Tracker PoseView now uses BPrivate::gWidthBuffer instead of it's own
instance.
* TextView.h and PoseView.h are now a little cleaner.
* InterfaceDefs.cpp now deletes gWidthBuffer in _fini_interface_kit_().
* Added binary compatibility support for NetPositive in WidthBuffer.h and .cpp.
Obviously it kind of defeats the purpose of having WidthBuffer neatly tucked
away in the BPrivate namespace, but Haiku should run NetPositive, I guess.
Fixes#2879.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28532 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fix _SetTime(), was using the wrong * operator, resulting in
an overflow at some point that lead to the mentioned jumping
fixes 2878 and 3057
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28524 a95241bf-73f2-0310-859d-f6bbb57e9c96
as public defines. They are now called THREAD_{MIN|MAX}_SET_PRIORITY to
better reflect what they are for. Minimum priority is now 1, ie. you no
longer can set another thread to the idle priority. This fixes part of
ticket #2959.
* set_thread_priority() will no longer allow to change the priority of the
idle thread to something else. This fixes the rest of ticket #2959.
* Automatic whitespace cleanup in OS.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28521 a95241bf-73f2-0310-859d-f6bbb57e9c96
discarding their changes. This functionality currently only works correctly
when no transactions are used.
* Started test application for the block cache, doesn't do anything yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28496 a95241bf-73f2-0310-859d-f6bbb57e9c96
can export a structure containing callback hooks invoked by the
runtime loader when certain image events occur (image loaded,
relocated, initialized, etc.).
* Also added a mechanism to patch image symbols. For an image callback
functions can be installed that patch symbols exported or imported by
the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28475 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added new(mynothrow) operators which avoid clashes when also linking
against libgcc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28474 a95241bf-73f2-0310-859d-f6bbb57e9c96
<runtime_loader.h>, since it isn't a kernel <-> userland interface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28456 a95241bf-73f2-0310-859d-f6bbb57e9c96
add-on) we create a breadth-first sorted image list and use that to
search for symbols.
* Added support for preloading libraries. The environment variable
LD_PRELOAD can contain a whitespace-separated list of shared objects
that will be loaded before the program. This allows to replace
symbols without changing the executable or libraries.
* Resolved TODO in load_program() regarding the order of remapping the
images and initializing the dependencies (problem fixed in r28453).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28455 a95241bf-73f2-0310-859d-f6bbb57e9c96
- code is disabled yet as the bootloader doesn't have add_boot_item.. will need to pass via kernel args
- add a GetFileMap() method to the vfs, and implement it in FAT code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28445 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented Synaptics touchpad support in the PS2 bus_manager by
refactoring/splitting the structure some and adding touchpad device
handling.
* Implemented Touchpad input_server device add-on
* Created Touchpad preflet for configuring advances Synaptics touchpad
options like scroll region (both horizontal and vertical) as well
as other neat stuff
Thanks a lot, Clemens!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28416 a95241bf-73f2-0310-859d-f6bbb57e9c96
mode informations are available.
* This is passed to the graphics card when the mode is set in the hopes that it
will be more conforming.
* Not yet tested on real hardware, though, therefore the VESA driver doesn't
do anything like this yet. I will test next, but please report any problems
with this nonetheless.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28390 a95241bf-73f2-0310-859d-f6bbb57e9c96
that conveniently bridge BVolumes/mount points with BPartitions.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28346 a95241bf-73f2-0310-859d-f6bbb57e9c96
ide_mask_sector_count_48, and ide_mask_LBA_*_48 were all wrong.
* Using the high byte in LBA48 mode should work now, too (wasn't written
to the IDE controller before, but that shouldn't have been a problem yet with
today's disks).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28340 a95241bf-73f2-0310-859d-f6bbb57e9c96
