Fixed typo on previous commit of expat.
Note that this moves the location of openssl, so other packages that
make use of openssl may or may not require rebuilding as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41458 a95241bf-73f2-0310-859d-f6bbb57e9c96
written first/last depending on the operation to avoid modifying entries that
are still unmasked or unmasking entries that aren't set up yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41457 a95241bf-73f2-0310-859d-f6bbb57e9c96
have unexpected side effects once we shift them more than 30 bits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41452 a95241bf-73f2-0310-859d-f6bbb57e9c96
informational only, but most of these entries actually need to be handled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41450 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Actually program the IO-APIC ID when configuring the IO-APIC.
* Moved some debug output around.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41447 a95241bf-73f2-0310-859d-f6bbb57e9c96
mark the ISA interrupts as unusable and then use ioapic_is_interrupt_available
to determine if that vector is possibly taken by an IO-APIC. If IO-APICs are
not used, this will simply always return false, leaving all vectors free for
MSI use.
* The msi_init() now has to be done after a potential IO-APIC init, so it is now
done after ioapic_init() instead of inside apic_init().
* Add apic_disable_local_ints() to clear the local ints on the local APIC once
we are in APIC mode (i.e. the IO-APIC is set up and we don't need the external
routing anymore).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41445 a95241bf-73f2-0310-859d-f6bbb57e9c96
multiple IO-APICs every IO-APIC was initialized to the standard mapping before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41434 a95241bf-73f2-0310-859d-f6bbb57e9c96
we got. If the routing is possible with the limited IO-APICs everythings good,
if not we will simply fail at the routing preparation stage where we can still
fall back gracefully. This makes things a bit more error resilient.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41432 a95241bf-73f2-0310-859d-f6bbb57e9c96
number. This accounts for possible gaps in the IO-APIC GSI mappings. Since most
of the time there will be only a single IO-APIC the extra overhead is relatively
small.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41431 a95241bf-73f2-0310-859d-f6bbb57e9c96
the same for the first IO-APIC in the bootloader (also using the MADT), but
here we can use the ACPI module. The enumerated IO-APICs are added to the list
and should be usable from there on. For lack of hardware I wasn't able to really
test that though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41430 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some TODOs regarding register write order that might have bad side
effects.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41428 a95241bf-73f2-0310-859d-f6bbb57e9c96
functional change intended.
* Use an appropriately sized sLevelTriggeredInterrupts for each controller type.
This also fixes an out of bound access for IO-APICs with more than 32 entries
and also returns the right mode in such cases.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41426 a95241bf-73f2-0310-859d-f6bbb57e9c96
* changes next_log to their actual type instead of void*
* the field this_phy now includes the item type, it simplifies things.
* isochronous transfer descriptors are linked in the periodic frame list first,
and points to existing interrupt transfer descriptors.
This is still work in progress. Yet it's worth committing as it doesn't seem to
have impacts, and is required for the UVC SoC project. Tested basically with
usb_webcam to receive UVC stream headers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41424 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the length of the sHaikuRevision character array symbol needs to be set explicitly,
as using either _SYS_NAMELEN or sizeof(utsname::version) will only return the values
for the host, which may not match ours, thus potentially causing problems when using
sHaikuRevision
* add headers/private/system_revision.h which defines SYSTEM_REVISION_LENGTH to 128
* adjust definitions of sHaikuRevision in libroot and kernel accordingly
utsname::version is shorter than SYSTEM_REVISION_LENGTH, but that doesn't cause any harm
until we have indeed switched to a DVCS (in which case longer revision strings will be
cut off by 'uname').
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41421 a95241bf-73f2-0310-859d-f6bbb57e9c96
already. This allows to detect invalid settings before starting to enable
IRQ routing and therefore allows to gracefully fall back to PIC mode on error.
* Actually read the number of IO-APIC entries before using that number in
routing preparation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41416 a95241bf-73f2-0310-859d-f6bbb57e9c96
gracefully in such cases (resulting in the IO-APIC not being used).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41415 a95241bf-73f2-0310-859d-f6bbb57e9c96
vectors at all. It'd also not work for multi IO-APIC setups which we don't
support yet (but are relatively rare anyway).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41414 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add boot item support to radeon hd driver
* add edid storage to shared info
* add pull of active monitor VESA EDID to radeon hd driver (until AtomBios complete)
* EDID pulled in driver now passed to create_display_modes
* move registers to external stock xorg radeon hd register headers (lic. allows it)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41411 a95241bf-73f2-0310-859d-f6bbb57e9c96
hardwired GSIs and updated on configuring the link devices, is used for that.
This doesn't guarantee optimal results as some link devices may not be
configurable to some IRQs and we might fill up their slots this way. Most of
the time this should be good enough though.
* Take the BIOS assigned IRQ white list into account when assigning IRQs in the
ISA range and avoid assigning to non white listed IRQs. Quite probably it'd be
ok to use all of the IRQs present in the possible IRQ list, but let's play it
safe...
* Also white listed are the IRQs that were set on the link device before
reconfiguration.
* Some cleanup, use references instead of pointers where applicable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41401 a95241bf-73f2-0310-859d-f6bbb57e9c96
configuration that doesn't require any link device changes and will only
prepare for updating the pci_info. Enabling then does the link device setup
and updates the pci_info with the new IRQ values.
* Configuring link devices now takes into account that multiple devices may
share a single link device, meaning that the sharing PCI devices can't be
configured independently.
We still only blindly configure the first possible IRQ on the link devices, but
now we actually have all the information to change that. Working on that next.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41400 a95241bf-73f2-0310-859d-f6bbb57e9c96
independently. Matching will happen first to enumerate and match all devices.
Updating will happen after configuring all link devices, so once we know the
final GSI of all entries. The info about matching functions is kept in a
bitmask in the table entry.
* Move routing table entry handling out of the loop into it's own function to
faciliate early returns.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41399 a95241bf-73f2-0310-859d-f6bbb57e9c96
Those can be used to white list PCI IRQs in ISA space (<= 15) as those are
basically guaranteed not to overlap with ISA devices. Those white listed entries
can then be used if we only have a 16 pin IO-APIC or if there are only legacy
IRQ resources available for configuration (i.e. ones with bitmasks of 16 bits,
limiting their range to IRQs 0-15).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41397 a95241bf-73f2-0310-859d-f6bbb57e9c96
using the already parsed pci_info data from the PCI module. This removes the
need to iterate over all of the pci_infos for each routing table entries which
makes this an order of magnitude less expensive. Heavily inspired by the
corresponding FreeBSD code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41395 a95241bf-73f2-0310-859d-f6bbb57e9c96
