451d8d47e1
Added support for creating a bus_dma tag for the mbmem bus.
2001-04-18 03:34:54 +00:00
5f19315baa
Now define IPL_BIO.
2001-04-18 03:30:14 +00:00
68230340aa
Fixed a bug in db_write_text where on exit we would bash
...
a PTE in whatever user context happened to be set on
entry.
2001-04-18 03:19:21 +00:00
cb893abf13
typo
...
PGOFFSET -> PGOFSET
2001-04-18 01:35:14 +00:00
1bf3f87777
Fix a problem with kcopy()/copyin()/copyout() on MP systems
...
that became apparent when UBC was added: store a pointer to
the process itself, not a pointer to ci->ci_curproc.
This gets us back to where we were before UBC went in: MP
kernels get to single-user mode, and can run processes on
both CPUs, but things go south when we try to come into
multi-user mode.
2001-04-18 00:38:10 +00:00
a51a1d8cdd
- Get rid of the prot bits in the mem_clusters[] array when
...
reserving RAM in the bus_mem extent map. Problem pointed
out by Artur Grabowski.
- Work around a slightly annoying bit of behavior exhibited by
the UP1000 firmware. The UP1000 firmware reports the space
consumed by the "ISA hole" in the same MDDT entry as two
chunks of RAM (on either side of the hole) used by the PALcode,
all as one "reserved for PALcode" chunk. We must take this
into account when reserving RAM in the bus_mem extent map.
2001-04-17 21:52:00 +00:00
4485b7f720
pmap_enter():
...
* turn ad-hoc `pmap resources allocated during sleep' into a panic condition
(this should all be prevented by higher level VM locking).
* arrange for ENOMEM to be returned if PMAP_CANFAIL is on, and malloc()
and/or pool_get() fail.
2001-04-17 20:14:46 +00:00
58165a53a2
Make masked interrupts don't bring CPU out of idle mode.
2001-04-17 17:12:40 +00:00
cfa894dce0
Use idle mode in process waiting idle loop.
2001-04-17 16:14:57 +00:00
de8e20334a
Map a page needed for entering idle mode.
...
Also, use zero memory at physaddr 0xe0000000 to clean D cache.
2001-04-17 16:10:47 +00:00
ffe7f4da8a
Fix a bug crept in the previous revision. Call dosoftints() after
...
reenabling interrupts.
2001-04-17 16:07:13 +00:00
a78b59337f
Overhaul interrupt handlers.
...
- Set the match register before calling hardclock() to prevent
clockintr lossage.
- Better handling of match register overrun case.
2001-04-17 15:58:51 +00:00
0c1210c6b3
Make the debugging hack needed for DEBUG_BEFOREMMU functional again.
2001-04-17 15:53:04 +00:00
5373b5ab86
Special care must be taken in order to run statclock at 128Hz.
...
For now, change statclock rate to 64Hz for simplicity.
Thanks to Ross Harvey for pointing out this issue.
2001-04-17 15:49:02 +00:00
cdc83120a7
fix SINGLE_VRIP_BASE condition.
2001-04-17 15:45:20 +00:00
af9740eeee
Initialize platid in hpc_machdep().
2001-04-17 15:33:39 +00:00
a8106b2b59
Fix typo. kbdparam.h -> kdbparam.h.
...
RP12685
2001-04-17 15:19:41 +00:00
40c8d08347
Oops, intptrs are always long integers.
2001-04-17 13:46:02 +00:00
97683d27ae
- definition for vr cpu identify.
...
- definition for vr cpu group identify.
2001-04-17 11:13:16 +00:00
6456e9d8a9
increase maxsegs of esp main dma map by one to avoid error
...
tweak esp glue to read xfer_len from dma map
add some debugging checks for dma driver invariants
read DD_LIMIT instead of DD_SAVED_LIMIT on scsi dma shutdowns
2001-04-17 03:42:24 +00:00
fa84b1d943
make sure that dm_segs is last field of next68k_bus_dmamap,
...
so that variable length allocations work
2001-04-16 21:36:58 +00:00
7b97ef04ca
Enable clockswitching on sa110 (with it disabled the core clock runs at the speed of the memory bus)
2001-04-16 18:09:56 +00:00
074987f4a3
Ensure that we have some idea what a label_t is, even in userland.
2001-04-16 17:30:32 +00:00
18c1bea288
Oops, properly mark a memory operand as both an input and an
...
output as necessary.
2001-04-16 17:05:22 +00:00
020a050984
Randomize the statclock period properly. We use the same algorithm as the
...
sparc port.
2001-04-16 14:12:38 +00:00
b2bff5fc7f
add receive ethernet bpf tap
...
keep receive ethernet crc and set M_HASFCS
change bus_dma MD fields to keep xfer_len for entire map
instead of per segment
turn off automatic dma restarts in preparation for changing
scsi driver to handle them.
add dma debugging routines to keep history of dma states
tweak checking for unusual dma limit register
2001-04-16 14:12:12 +00:00
511ae4853c
Remove extra whitespace after \.
2001-04-16 13:45:31 +00:00
00ec577a8e
add VR4122 specified register definitions.
...
XXX: vrip.c is not yet supported VR4122.
2001-04-16 09:55:56 +00:00
8a19f18c0b
fix typo in comment.
2001-04-16 09:17:05 +00:00
1bd443444b
In splx(), don't call spl0() unless the ssir != 0.
2001-04-15 23:26:05 +00:00
00f815f803
Clean up soft interrupt related stuff a bit.
2001-04-15 23:07:34 +00:00
9e3772786d
Add header files for PPC and SSP register definitions.
2001-04-15 17:27:26 +00:00
1875326646
Use the second channel to generate 128Hz statclock interrupts.
...
top(1) reports more accurate CPU times (user/sys/intr/idle) now.
2001-04-15 17:19:32 +00:00
f06533a1ee
Add definitions of C99 integer format conversion macros.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-15 17:13:04 +00:00
739cb75837
Add definitions of C99 specified-width integer type limits.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-15 15:29:02 +00:00
c544d84b41
Catch up with ansi.h rev. 1.12: define SIZE_T_MAX and SSIZE_MAX as long
...
integer constants in ELF environments.
2001-04-15 14:16:08 +00:00
80ad23a5da
Catch up with ansi.h rev. 1.12: define intptr_t and uintptr_t as long
...
integers in ELF environments, like is done with ptrdiff_t.
2001-04-15 13:38:19 +00:00
05859f4c8e
Add __COMPILER_UINT64__="unsigned __int64" syncing with the change
...
of arch/mips/include/int_types.h, revision 1.4.
2001-04-15 12:27:32 +00:00
5a15be6a18
Don't panic on a stray IRQ, just log it and hope it goes away. This works for
...
my acemidi card at least.
2001-04-15 11:59:43 +00:00
60f9754d4b
Add __COMPILER_UINT64__="unsigned __int64" syncing with the change
...
of arch/mips/include/int_types.h, revision 1.4.
The version of the binaries are '1.17.3 2001.04.15'
2001-04-15 10:10:43 +00:00
75f6b62025
Add long-missing(!) <machine/math.h>.
2001-04-14 22:48:31 +00:00
cdcf9f46c5
Add definitions of C99 integer constant macros.
...
Tidy Makefiles up a little.
2001-04-14 22:46:19 +00:00
a7c20e5788
Add definitions of C99 integer constant macros.
2001-04-14 22:38:33 +00:00
cee3528adc
When checking if an IRQ is active, check for _all_ the right bits' being set,
...
not just some of them.
2001-04-14 19:58:58 +00:00
763e66f5de
Initial commit of wsmouse driver for the IOMD quadratic mouse.
2001-04-14 19:22:43 +00:00
e0e3b230c1
Remember to initialise the interrupt handle.
...
Bugs like this are my penalty for having my only supported podule in slot 0.
2001-04-14 18:39:20 +00:00
9beeeabe1b
Define a PAGER_MAP_SIZE of 4MB for the benefit of low-memory models.
...
XXX: This may still not be low enough for models with less than 8MB RAM...
2001-04-14 16:02:24 +00:00
4e845e001a
Accidently left COMCONSOLE configured
2001-04-14 14:51:04 +00:00
72eb64fead
Propagate __HAVE_GENERIC_SOFTINTR to assembly files.
2001-04-14 13:56:02 +00:00
dd8c947561
Implement a real microtime() by reading the timer counter register.
...
On mvme147 this gives 6.25uS resolution, and 1uS on all other boards.
2001-04-14 13:53:05 +00:00
c605c91bdf
Fix bootline argument passing from the Bug PROM.
2001-04-14 13:43:07 +00:00
7affdab52e
Add definitions of C99 minimum-width and greatest-width integer types.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-14 12:19:49 +00:00
8b3fc18a1f
Generic soft interrupt implementation for NetBSD/i386. This could
...
probably be tuned somewhat, but this is a stop-gap measure to hold
us until Bill Sommerfeld's new interrupt code comes in from the
MP branch.
2001-04-14 06:49:30 +00:00
c025377acc
Cleanup of attachment code of framebuffers
2001-04-14 02:25:43 +00:00
e964ad79cf
Change the softintr implementation to be a bit more cache friendly
...
(though, sigh, slightly more expensive at softintr_schedule() time).
2001-04-14 00:45:13 +00:00
bf2dcec4f5
Remove the use of splimp() from the NetBSD kernel. splnet()
...
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
d3c7885319
Make sure that every time we touch the referenced/modified bits, we do a
...
pmap_update_page() to get all the mappings of that page up-to-date.
2001-04-13 16:37:28 +00:00
362ba8300c
Include USB and 1394 support (sun models now have them).
2001-04-13 16:26:41 +00:00
991d163aa2
Remove code from pmap_fault() that ws trying to do referenced/modified
...
emulation on kernel pages (and getting it wrong).
2001-04-13 15:09:35 +00:00
7b00aef2da
Rev 1.3 accidentally undid rev 1.2. Re-do it.
2001-04-13 14:50:47 +00:00
ac01781de7
Make UBC_WINSHIFT a constant.
2001-04-13 12:40:16 +00:00
fbc07662f5
$NetBSD$ tag cleanup
2001-04-13 08:11:44 +00:00
eb0cfc6af5
s/$Id$/$NetBSD$/
2001-04-13 08:09:07 +00:00
9133b51cd8
Replace the 'unsigned __COMPILER_INT64__' construct with a new name,
...
__COMPILER_UINT64__, to be supplied - if such a case is made, it shouldn't
be assumed that the unsigned type-specifier may be applied to it.
2001-04-12 22:01:18 +00:00
fdeb609887
Place a remark ... the old vidcconsole code can't handle the comconsole
...
not yet for it is called early in the init_arm() ... this needs to be
patched one day so it can be called very early; but is this possible ?
2001-04-12 21:54:06 +00:00
242cca702b
Part one of the COMCONSOLE repair ... it works now but the video console
...
is effectively dead instead... this needs work. Also the boottime switching
to the vidcconsole would be good.
2001-04-12 20:15:06 +00:00
0d8e6faeb2
splimp -> splvm
2001-04-12 19:43:46 +00:00
316dcc474b
splvec.splimp -> splvec.splvm
2001-04-12 19:21:20 +00:00
023e07a194
splimp -> spluba
2001-04-12 19:16:56 +00:00
c031c366f6
Add spluba().
2001-04-12 19:16:06 +00:00
9b2337e9d8
splimp -> splbio.
2001-04-12 18:34:56 +00:00
89fb12c497
splimp -> splhigh when frobbing netisr.
2001-04-12 18:28:40 +00:00
0f05a2b35c
splimp -> splhigh for frobbing the netisr.
2001-04-12 18:26:26 +00:00
f5940ea000
splimp -> splvm (XXX Time critical sections, but don't want to block
...
the clock).
2001-04-12 18:22:55 +00:00
ba0a86fa22
There are no level1 or level7 interrupts possible on the Milan...
2001-04-12 09:09:56 +00:00
8507fcec54
Update these for Milan addresses.
2001-04-12 07:17:30 +00:00
7a46b74c7b
splimp -> splbio.
2001-04-12 06:20:59 +00:00
b614ba3c5c
splimp -> splhigh
2001-04-12 06:08:44 +00:00
ff7a879497
splimp -> splvm
2001-04-12 06:07:42 +00:00
11c012efcc
Just switch the RI_CENTER off for now ... just to avoid troubles with
...
the hardware scrolling code...
2001-04-12 00:42:50 +00:00
62ec61f5e9
fix comment.
2001-04-11 20:13:52 +00:00
bb1594b20b
Integrated security review for signal delivery by Wolfgang Solfrank
2001-04-11 19:41:02 +00:00
3f7694f804
Adapt these for use on the Milan.
2001-04-11 14:45:07 +00:00
5dd91b669c
add VR4101 specific BCU registers.
...
add VR4122 specific BCU registers.
add cpu specific comments.
2001-04-11 08:52:59 +00:00
68d21310de
opt_vr41x1.h -> opt_vr41xx.h.
...
add 'options VR41XX' and kill 'options VR41X1'.
add 'options VR4101' (not yet supported)
add 'options VR4102'
add 'options VR4111'
add 'options VR4121'
add 'options VR4122' (not yet supported)
add 'options VR4181' (not yet supported)
these are for config level size optimization.
currenty, no optimization codes are exist.
NOTE: there are some incompatibility in VR4181 & VR4101 &
VR4102,4111,4121 group & VR4122.
GENERIC (for VR41XX series) has options VR4102, VR4111, VR4121.
2001-04-11 08:23:26 +00:00
4290b6b288
Make sure that this will compile on a big-endian system.
2001-04-11 01:47:18 +00:00
d039e70428
Remove the "asc" driver. It's never worked, and we should have an MI version
...
sometime.
2001-04-10 21:33:00 +00:00
247d880fc9
The Milan uses the U0 pin to switch the pci-bridge between little & big
...
endian mode. That's why I moved the 'wired' flag to U1.
2001-04-10 19:51:00 +00:00
dcc1c6a9fb
Take NFDISA into account.
2001-04-10 19:36:20 +00:00
4c8caed00d
Apply a bandage to delay() so that it takes a more suitable time on
...
StrongARM Risc PCs. It really should be replaced entirely, but I've got more
important bugs to fix.
2001-04-10 19:08:42 +00:00
edde8b993b
Add a DIAGNOSTIC check to see if delay() waits long enough (it doesn't on
...
my machine).
2001-04-10 18:58:56 +00:00
dc0e725f9d
full[tc]flush from GLOBAL -> ASLOCAL.
2001-04-10 13:59:10 +00:00
7d1452855c
Fix bus_space_write_multi_* in the memory case; the asm constraints
...
were wrong.
2001-04-10 12:59:32 +00:00
b27eda4ead
Added.
2001-04-10 12:46:26 +00:00
1dfde059ab
Use fb_setsize_eeprom to do some intialization of the
...
fb structure.
2001-04-10 12:44:12 +00:00
bb09d2bc78
Fixed a bug where we were trying to map the board RAM
...
using the physical address of the board registers.
2001-04-10 12:42:51 +00:00
ca414a50ad
In prom_init, when making our local copy of the bootparams,
...
be sure to calculate the shift in terms of chars, not struct
bootparams, and don't shift undefined arguments.
2001-04-10 12:40:53 +00:00
8efc1dcff9
Fixed has_context to return true on the kernel pmap,
...
which always has context zero. This was causing panics
under DIAGNOSTIC.
2001-04-10 12:39:56 +00:00
857e8fbc6b
The mainbus doesn't define a device name in the attach args
...
after attaching the special busses, so just match when it
isn't, instead of calling strcmp with it.
2001-04-10 12:37:49 +00:00
c6871b7720
Make softintr_handler return one, not zero, to properly
...
claim the interrupt. Added special bus_space_probe
handling to sun2_bus_map.
2001-04-10 12:33:09 +00:00
af0a9202ce
Under DIAGNOSTIC, disabled a test that was using an
...
instruction not available on the 68010. Also removed
more old sun3 cache-related code.
2001-04-10 12:29:10 +00:00
c4973c2333
In fpu_probe, now be sure to return FPU_NONE. Returning
...
FPU_UNKNOWN was causing confusion in cpu_switch.
2001-04-10 12:27:40 +00:00
0cb40c9174
Define a very small UBC_NWINS to keep UBC from eating all kernel VM.
2001-04-10 12:24:05 +00:00
0050ddd2b2
Be paranoid, #undef PAGER_MAP_SIZE before defining it.
2001-04-10 12:23:14 +00:00
eeea1bcd05
g/c transfer_check
2001-04-10 10:09:45 +00:00
3e3afaaac3
Regen. again...
2001-04-10 07:03:49 +00:00
e3d2d361fd
The Hades also uses the TT030 like SCSI driver. Remove 'mouse' here...
2001-04-10 06:46:01 +00:00
2d38da2932
Initial MILAN generic config
2001-04-10 06:39:36 +00:00
e409b5d5df
Regen.
2001-04-10 06:39:10 +00:00
99047718f0
fdisa needs-flag...
2001-04-10 06:37:08 +00:00
30f5357c6e
Move dma.c away from the mainbus floppy and make it a separate entity with
...
tag 'mbdma'.
2001-04-10 06:36:08 +00:00
e159fdc910
files.atari:
...
Defopt motherboard type and make ym2149.c dependend on 'standard' atari
boards.
Configfiles:
Add pseudo device mouse. It got dropped in the moves by accident.
2001-04-10 06:28:38 +00:00
dfaa29355b
Add a config file for the Milan. Note that you cannot build a working Milan
...
kernel yet. There are still quite some bits missing in the repository.
2001-04-10 05:56:25 +00:00
1e08d983e3
Move GENERIC to GENERIC.in . This avoids confusion since GENERIC is not a
...
standalone config file anymore.
2001-04-10 05:52:14 +00:00
422ddeb55b
In cpu_fork(), initialize u_pcb.pcb_context[8] so that the newly
...
spawned kthread/process runs at IPL_0 instead of whatever IPL the
parent was running at.
This appears to fix the NTP clock stability problems observed on some
alpha systems; the clock appears stable even when there's heavy
raidframe (i.e., kthread-intensive) I/O under way.
2001-04-10 00:27:00 +00:00
cd24bc13e7
Account for the number of counter ticks that elapse while statintr()
...
processing takes place. This prevents stat clock skew by a factor
approximately proportional to stathz (not a serious problem if stathz==100;
but considerable already if stathz==1000).
2001-04-09 21:28:50 +00:00
2c2e7aca80
Add macro to convert a counter register value to microseconds.
2001-04-09 21:17:33 +00:00
986e7f8f1c
Interrupt latency fix from sparc port. (Hm. One insn instead of 5).
2001-04-09 21:15:42 +00:00
b6c1c5d49a
Altentries should also be marked as functions, to keep linker happy.
2001-04-09 20:31:20 +00:00
3e6eaba006
The old vidc console code can't handle all display depths
2001-04-09 19:33:22 +00:00
ba53dd71d7
Re-enable setmode() in wscons implementation.
2001-04-09 19:23:32 +00:00
b592059273
Just some pretty printing for 640 width screens
2001-04-09 19:22:42 +00:00
a0daff5647
proc_trampoline(): mave the new process run at base interrupt priority level.
...
This is especially important for in-kernel processes started from here,
which would otherwise keep running at splclock().
2001-04-09 18:18:48 +00:00
e0d02d24d5
Mark syscalls as functions.
2001-04-09 15:52:59 +00:00
e9d5de6e98
Patch the hardware scrolling to be only used when using VRAM until it is
...
working perfectly with DRAM only.
2001-04-09 13:59:44 +00:00
3aabea5c70
Remove '_KERNEL' conditionalizing. This break userland apps.
...
Noted by Steve Allan.
2001-04-09 05:35:32 +00:00
2a7597f49e
Make this compile w/o ukbd.
2001-04-08 08:53:31 +00:00
ed0aea79a7
Make the NC start run again ... it didnt detect the start of the DRAM good
...
enough.
2001-04-07 20:57:24 +00:00
179671f564
automatically restart dma for unexpected shutdowns
2001-04-07 13:02:55 +00:00
b2e3cc1a2e
continue to tweak nextdma detection of xfer length
...
add check to esp driver for incomplete transfers, but still does not handle them.
2001-04-07 11:29:50 +00:00
824065dc0a
Don't call "is_a1200()" again after its result was stored in the "softc"
...
structure.
2001-04-07 05:09:27 +00:00
adc78de568
Regen.
2001-04-06 21:55:11 +00:00
54d70d6eef
Add a 'ser0' device to all. Add ne2000, 3Com 3c59x/3c90x and ESS Solo-1
...
support to the Hades.
2001-04-06 21:53:39 +00:00
666b4cf417
A successful compile is near.
2001-04-06 17:17:58 +00:00
1c69191831
Fix typo - s/dbcst/dcbst/.
2001-04-06 16:48:11 +00:00
ec984a04ad
Added.
2001-04-06 15:05:55 +00:00
3ff14b7ac5
vm/vm.h -> uvm/uvm_extern.h
...
Cleaned up definitions of cputype and mmutype.
mon.h -> promlib.h, and use all of the new prom_
functions instead of the old mon_ functions.
Removed all of the old mon_ capturing code to
promlib.c.
2001-04-06 14:59:09 +00:00
e3edb8d20c
Gratuitous comment changes.
2001-04-06 14:52:56 +00:00
6529ec2635
Now include machine/promlib.h instead of machine/mon.h, and
...
use the new prom_ functions instead of the old mon_ functions.
Added the internal _pmap_extract_pmeg function, and removed
some old Sun3 cache-related code.
2001-04-06 14:52:19 +00:00
353ad332f0
Added some support for the old-school 'g0' and 'g4' monitor
...
hooks, and removed some old Sun3 cache and interrupt-register
related code.
2001-04-06 14:36:08 +00:00
06c28be1fe
Install byte_swap.h on make includes.
2001-04-06 14:11:20 +00:00
20293ce870
Added.
2001-04-06 13:13:01 +00:00
d8d78f2801
Added a prototype for the internal function _pmap_extract_pmeg,
...
used by the bus_dma implementation when double-mapping pages
by hand.
Now define PMAP_OBMEM for completeness.
2001-04-06 13:12:06 +00:00
874e89c74d
Added an internal bus_space flag to find and use PROM mappings.
...
Added an internal bus_dma flag to mark when a map has been
loaded by double-mapping pages by hand, outside of the pmap.
Added more prototypes for our bus_dma implementation.
2001-04-06 13:09:10 +00:00
85c6ec3b50
Now use the proper DVMA map size depending on what
...
machine type we're on.
Removed all prototypes, since we're going bus_dma.
2001-04-06 13:03:14 +00:00
14dbdf5518
Negative exit code cleanup: Replace exit(-x) with exit(x).
...
As seen on tech-userlevel.
2001-04-06 11:13:45 +00:00
ff71a021ca
There is no /usr/include/hpcarm/disklabel_acorn.h.
2001-04-06 11:10:57 +00:00
e482ee9d62
add rnd (for ssh/sshd) and couple comments
2001-04-06 06:44:08 +00:00
3180bc6ac6
Fix a couple of bugs including kernel_pt_table[] range overflow.
...
I thought some incompatiblity with gcc-2.95.3 prevented booting,
but the actual reason was this silly overflow.
2001-04-06 05:38:01 +00:00
0eb01da9c9
Two preliminary NC kernel definition files....
2001-04-05 22:34:28 +00:00
1b2003f235
Apply patches for the NC ... not really in the line of the merge but at least
...
its in the source tree for now.
2001-04-05 22:33:12 +00:00
9411be7c80
Re-enable the old "ea" and "eb" drivers under the names "oea" and "oeb".
...
These shouldn't last long, but they may be useful until I hammer all the bugs
out of the new version.
2001-04-05 20:31:50 +00:00
b672929b7f
Support uni-north based models. (XXX not complete)
2001-04-05 19:55:01 +00:00
b44dca831b
Since the NC's seem to have trouble with the OS_HeapSort, i've implemented
...
my own sorting routine (bubblesort). Also replaced a declaration for BASIC
seemed to mess things up.
2001-04-05 19:17:17 +00:00
d9de58f3e1
Ansify. Replace bcopy/bzero with memcpy/memset. Clean up formatting.
...
Clean up debug messages. No significant functional changes.
2001-04-05 18:06:45 +00:00
a9e0aabf3f
Correct input volume settings.
2001-04-05 14:21:31 +00:00
1324cab42e
And commit the generated files.
2001-04-05 12:25:15 +00:00
6b22a0776c
Forgot this in previous commit.
2001-04-05 12:22:10 +00:00
fb0acfc293
Major overhaul in the config files. The idea is to have the major part of
...
the generic options in GENERIC instead of duplicated all over the place.
To generate a config file, run 'makeconf'. This script uses cpp to combine
a '.in' file and GENERIC to a real config file.
2001-04-05 12:21:30 +00:00
b01df63489
Assume USB keyboard when `usb-kbd-ihandles is not found.
2001-04-05 10:10:26 +00:00
eb4f61df19
Regenerate this file from cvs repository in order to get back original
...
copyright.
2001-04-05 09:58:05 +00:00
4db02d75fa
initialize zsaddr to intio address space in zs_attach
...
addresses pr 6770
in the future, zs should be upgraded to use NEXT68k_INTIO_BUS_SPACE
instead of using IIOV directly.
2001-04-05 05:35:12 +00:00
0c6af3e769
comment out M68030, since we do not yet support NeXT 68030 computers
2001-04-05 04:42:42 +00:00
14688b4513
check for a 68040 MMU before using the TBIA instruction
...
addresses PR 10409
code grabbed from mvme68k locore.s
2001-04-05 04:37:43 +00:00
1e812ee6cf
remove unused cache operations, we now use shared m68k/cacheops.c
2001-04-05 04:23:56 +00:00
d2b84b36d2
Removing an old unused include
2001-04-04 21:40:20 +00:00
8008708109
Hmm... these were just plain wrong ... it should be more sane now
2001-04-04 21:11:07 +00:00
3a27b85296
This only works with data registers.
2001-04-04 19:53:05 +00:00
9d0e339af2
Fix a big memory allocation bug in the bootloader; i underdementioned
...
a piece
2001-04-04 17:13:28 +00:00
4678df7c23
Cosmetic change
2001-04-04 17:08:07 +00:00
41e535a424
Remove an unused variable which was caused on KERN_* error code removal.
2001-04-04 16:43:04 +00:00
0929f3662e
* Missing PROM_OPENFIRM: case in getdevtype() and prom_getether().
...
* In getdevtype(), use prom_instance_to_package() to get to the device node.
From Valeriy E. Ushakov on port-sparc@netbsd.org .
2001-04-04 15:41:46 +00:00
570716506c
Add rnd.
2001-04-04 10:18:28 +00:00
c8ff6232b7
Restore #endif which was mistakenly removed in previous.
2001-04-03 22:46:03 +00:00
15fbc5943f
Added a comented out COMPAT_LINUX option in GENERIC kernels of PowerPC ports
2001-04-03 19:50:43 +00:00
d95ba2eb80
Remove gratuitous setting of SYSDIR;
...
it is set in sys/kern/Make.tags.inc
2001-04-03 17:12:23 +00:00
c84d3343d1
add standard NetBSD RCS Id on top
2001-04-03 13:10:26 +00:00
6601895830
add vrc4172pwm for MC-R510, MC-R520.
2001-04-03 09:02:24 +00:00
bda486229f
This machine hasn't existed for some time.
2001-04-02 14:46:48 +00:00
4b9911dfd2
Finally implement the BREAK key in the wskbd ! :)
...
The BREAK key is a wierd one that gives an extra prelude.
2001-04-02 12:34:34 +00:00
ecca88089a
Override NFS read and write size to default to 32k for the i386 here
...
(can be overridden from a config file).
2001-04-02 11:48:18 +00:00
dacfad3be3
Clear interrupt latch after interrupts are processed, not before.
2001-04-02 09:54:16 +00:00
6c04c75c6c
No longer clobber the DMACSR_SETENABLE bit in the dma interrupt
...
Add the ability to handle unexpected dma shutdowns
2001-04-02 05:29:43 +00:00
a5523b0bfd
remove unused ifmedia fields
2001-04-02 05:29:42 +00:00
dff3edd66d
removed unused mediachange routines
...
changed ethernet receive to handle unexpected dma shutdowns
2001-04-02 05:29:42 +00:00
235c2b2545
reenabled flushcount diagnostic check.
...
tweaked formatting on hex dump debugging routine
2001-04-02 05:29:42 +00:00
403a09df61
resync with mvme68k
2001-04-02 05:28:38 +00:00
10e361a3bf
in the 386 case of copyout(), reload "len" from the stack after verifying
...
write permission since pcb_onfault will clobber %eax if we fault.
2001-04-01 23:54:14 +00:00
8a08e12c86
slighly adjust comment
2001-04-01 23:14:02 +00:00
12f7f9e0de
Make it compile again ... removed an unused variable
2001-04-01 20:16:25 +00:00
321ff3e0db
Remove the VIDC start video programming from the Vsync to when its moved; this
...
also solves problems with the interrupts being disabled in ddb resulting in no
scrolling :(
2001-04-01 20:08:18 +00:00
b98dc685a3
Be sure that all kernel stack pages are valid after swapin. Fixes PR#12520.
2001-04-01 19:18:42 +00:00
4b7f5e2feb
Add hardware scrolling to the RiscPC wscons implementation.
...
There are still some minor oddities esp. at startup but after that it
functions OK.
The scrolling speed is increased *dramatically* and allmost even faster
compared to the old vidcconsole code; *NOT* tested yet on non-VRAM machines.
2001-04-01 16:58:05 +00:00
29cf89ce1a
Bump BtNetBSD version number to 0.95 ... forgot that
2001-04-01 16:50:24 +00:00
85dc2162fb
Correct vBufA offset. (currenly not used)
2001-04-01 15:14:36 +00:00
42fc57ff46
Remove gpio. It's not a time to use separate gpio node yet.
2001-04-01 10:42:34 +00:00
158796407f
Adjust timing for pmu99. Internal keyboard of recent PowerBooks
...
should work now.
2001-04-01 10:40:45 +00:00
36f2be46e8
purge the cache on BUS_DMASYNC_PREREAD instead of BUS_DMASYNC_POSTREAD
2001-04-01 01:42:51 +00:00
ad8c9f3a7e
Wcd attacment code for the Milan. The Milan has the standard dual IDE port
...
hardware. A Milan specific attachment is needed to modify the iot so that
the streaming methods do a byteswap.
Configure like:
wdcisa0 at isa? port 0x1f0 irq 14
wdcisa1 at isa? port 0x170 irq 15
2001-03-31 20:24:10 +00:00
a054ccd1d4
Add a tag to the fdcisa.c and isa/fd.c files. So they won't be used
...
unnecessary (and cause trouble).
2001-03-31 20:13:19 +00:00
101035dac6
Add EtherN/EtherI card support + EtherH media auto detection support.
...
Based on updated patch from Mike Pumford, originally submitted in
port-arm32/8765.
2001-03-31 15:32:46 +00:00
fe9328ad71
Reorder so that basic devices attach first.
2001-03-31 13:49:44 +00:00
2303009aeb
Add SA11[01]0 DMA controller register definitions.
...
(I forgot to commit this a week ago.)
2001-03-31 13:13:22 +00:00
4f12f94c95
Protect spl changing functions from interrupts.
2001-03-31 12:53:59 +00:00
c1244a5828
Remove cons_init(com), which prevents compiling in com_pcmcia.c.
2001-03-31 12:52:31 +00:00
02811d05f2
Fix a bug which caused interrupt loss.
2001-03-31 12:49:21 +00:00
2efdaff40e
Set hardware interrupt masks in sa11x0_intr_{establish,disestablish}.
2001-03-31 12:48:10 +00:00
129f529148
Back out most of rev 1.4 so that it compiles again.
2001-03-31 12:36:53 +00:00
dfddb1e107
Increase spl_masks[] size by one and set the extra element to 0.
...
irq_entry accesses here.
2001-03-31 12:22:37 +00:00
fab65b55e4
(Untested) recognition of KA55.
2001-03-31 11:50:45 +00:00
9a6b7bcffa
Support for the 4000/600 cache, from Lord Isildur. (mrfusion@vaxpower.org)
2001-03-31 11:50:12 +00:00
267271c1b2
Explain some SA_* options - reading compressed kernels, netboot
...
Useful for stripping down bootcode.
2001-03-31 09:45:11 +00:00
1a1b6fb6d2
Match XpressAudio.
2001-03-31 09:24:37 +00:00
92e327c226
Match PNP0320 (Japanese 106-key keyboard A01).
...
- We could use this information to determine the default keymap (?)
- Match more keyboards? (e.g.strncmp(idstr, "PNP03", 5))
2001-03-31 09:20:40 +00:00
5f670bebfc
Initialize the entire pmap table before populating it.
...
This addresses pr 7174
Thanks to Christian Limapch for diagnosing the problem.
2001-03-31 09:05:21 +00:00
c13ba16f2b
Fix an uninitialized variable reference in cpu_fork().
...
Reported by Tad Hunt <tad@entrisphere.com>.
2001-03-31 07:50:59 +00:00
41833a3286
comment out device register structure definitions, used for reference only.
...
remove unnecessary BUS_SPACE_MAP_LINEAR when mapping ethernet dma registers.
2001-03-31 06:56:54 +00:00
803c0c7eda
Add driver for AT1720 MCA cards. This uses generic MB86960 support code,
...
and shares some bits with ISA AT1700 driver. Gee, this one was really
easy :)
This card turned out to be quite good performer - I get about 360KB/s
on 386DX PS/2 machine, which is best of all supported cards so far.
2001-03-31 00:43:04 +00:00
2ceebb6c0e
Remove unnecessary test of tp->t_linesw against NULL; they are results
...
of confusion while correcting compilation error after t_line is
replaced with t_linesw.
2001-03-31 00:35:21 +00:00
6b982beac1
Call softintr_init()
2001-03-31 00:10:03 +00:00
3e4cc841a7
Add softintr and ISA bus support
2001-03-31 00:08:34 +00:00
a03b2aaaf0
Reverse previous commit - isa headers don't belong in /usr/include
2001-03-31 00:05:57 +00:00
d3a8b4016e
Add isa_machdep.h and isapnp_machdep.h
2001-03-30 23:59:19 +00:00
0ca4ab64ac
Add ISA serial port device
2001-03-30 23:54:45 +00:00
9641e5d860
Probe ISA bus devices
2001-03-30 23:52:05 +00:00
dd068f675e
Changes to interrupt architecture for softintr support
2001-03-30 23:51:14 +00:00
cdba0ef41c
Add some ISA bus cards
2001-03-30 23:49:37 +00:00
7cf783665e
Please preserve copyright notices modified by Ben Harris since the a.out and
...
ELF structure loadings are of his design from BBBB
2001-03-30 23:49:06 +00:00
1b6e2e02dd
Add files for ISA bus and softintr support
2001-03-30 23:47:58 +00:00
8cd59636b4
Support for ISA expansion slot in Mips 3230
...
The ISA Bus on this machine doesn't support DMA, and all interrupt lines
are wire-OR'ed together. Mileage may vary if sharing interrupts.
Tested cards:
com: 8250 and 16550 UART's (8 bit)
ec: 3com Etherlink II (8 bit)
we: SMC 8013 Ethernet (16 bit) [work in progress]
Probes, ARP in both directions works, sends clean packets,
tcpdump show correct packets on receive, NDP for IPv6 works,
netstat -s shows nothing strange.. but doesn't talk TCP/IP!
2001-03-30 23:45:18 +00:00
7d798b3ef7
Initial ELF kernel loading for RiscPC/A7000/NC based on Ben Harris's work
...
Since arm32 isnt switched to ELF yet its not completely tested; It loads
a kernel but then hangs on symbol table loading; propably a ELF/a.out
symbol table conflict.
Also cleaned up the code a bit
2001-03-30 23:44:58 +00:00
154a3bba69
use MI softintr
2001-03-30 23:28:00 +00:00
5d03735614
Move most interrupt functionality to arch/mipsco/mipsco/interrupt.c
...
Remove old style soft interrupts to favor MI softintr support
2001-03-30 23:26:29 +00:00
09d79c4b1f
New data structures and prototypes for MI softintr support
2001-03-30 23:23:37 +00:00
273d283d25
Implement MI softintr functions (softintr_establish, softintr_schedule etc)
2001-03-30 23:21:30 +00:00
9477a9256c
Re-implement bus_space(9) functions:
...
- Correctly handle striding of data
- Better support for endian neutral access
- Correctly implement _stream variants of bus_space functions that can
byte swap. This reverses the automatic byte swapping done in hardware
for 16 bit ISA bus cards
2001-03-30 23:17:03 +00:00
a22b0cbf4d
Optimize bswap16() and bswap32() functions to inline assembly.
2001-03-30 20:00:05 +00:00
7cd0069dfc
Make this compile without com.
2001-03-30 16:32:02 +00:00
c5496871db
fix comment.
2001-03-30 15:59:17 +00:00
a9a5dcd043
Add yds at pci and children.
...
Alpha and i386 are the only tested ports.
2001-03-30 14:47:48 +00:00
355086c412
The `speed' statistic from the RNG was brought to you by the letter `B' and
...
the letter `S'. I don't think anyone will miss it.
2001-03-30 12:05:02 +00:00
a6a587a71e
Track prototype change to isa_fillw() that avoids passing u_short as an arg.
2001-03-30 11:21:33 +00:00
5ba1d71d33
Don't reference nonexistent register on R96. (and maybe R94 too)
2001-03-30 09:10:48 +00:00
70a7bcb64b
Remove ncr53c9x_dmaselect
2001-03-30 07:49:07 +00:00
cce60f68dc
Added.
2001-03-29 21:07:56 +00:00
d6b50e1598
add fas configuration
2001-03-29 18:54:58 +00:00
6386dedebe
When attached, do not change brightness if the value is zero.
2001-03-29 17:44:50 +00:00
cc5ddb2b20
Make `trace' useful even w/o symbols and add /f option to dump parameters.
2001-03-29 14:58:08 +00:00
fb96b4d88c
Added.
2001-03-29 04:58:52 +00:00
22a64b5a3e
Added.
2001-03-29 04:35:09 +00:00
fbd8636feb
Added.
2001-03-29 04:16:21 +00:00
da500dc6be
Removed some sun3 references.
2001-03-29 04:07:54 +00:00
1c9cc1b092
use NCR_F_DMASELECT instead of ncr53c9x_dmaselect
2001-03-29 03:30:19 +00:00
6095b6e2ff
Added.
2001-03-29 03:24:19 +00:00
0640ad6ace
When the endians are little, they are little.
2001-03-29 03:23:33 +00:00
3eb7866aaa
Added support for the 68010 bus error frame.
2001-03-28 23:08:15 +00:00
a8c0b619da
support umct USB-serial device
2001-03-28 18:45:07 +00:00
676bacb4ea
include "opt_ddb.h" explicitely
2001-03-28 18:03:49 +00:00
7f28cbe9dc
Fix an obvious typo.
2001-03-28 17:33:07 +00:00
fdce371144
objcopy -> ${OBJCOPY}
2001-03-28 17:04:44 +00:00
864a597f2d
Define ${OBJCOPY}.
...
XXX: Should we use ${CROSSDIR} here or not?
2001-03-28 17:03:48 +00:00
2deceb396c
Brought up-to-date with revision 1.124 of the Sun3 pmap.
2001-03-28 14:15:11 +00:00
a8cd6c5401
Added.
2001-03-28 13:47:58 +00:00
5677634e50
Small comment correction.
2001-03-28 13:04:57 +00:00
221f247a25
Add some missing functionality.
...
- wait READY signal in enable function
- use tsleep for large delays
- implement disable function
2001-03-27 18:06:39 +00:00
b6aa1dfc2b
Compile vsbus_dma.c if vax53, hinted by Michael Kukat.
2001-03-27 18:01:59 +00:00
e84bc939c9
On alternate Tuesdays, SRM uses a different method of identifying
...
PCI interrupts routed to the ISA ICU.
2001-03-27 01:39:51 +00:00
a97039b0ae
pmap_release(), pmap_pinit() and the `pm_regstore' field are obsolete.
2001-03-26 23:18:51 +00:00
4de5b658ad
Use a pool cache for pmap allocation. The cached pmap structures include
...
a ready-to-use level 1 page table (on sun4m) and MMU context.
A simple `fork()' test shows an improvement in spent system time of
around 4 percent (which is just a bit disappointing, IMO, but it's
an improvement nonetheless).
2001-03-26 23:12:03 +00:00
104bada017
Missing KERNEL_PROC_LOCK() in the WIN_OF trap code.
2001-03-26 21:58:34 +00:00
10e66b85b1
Ensure that my last change compiles with warnings enabled.
2001-03-26 19:56:32 +00:00
2ff606560c
Do not save/restore the kernel SR since we are no longer trying to copy
...
it in pmap_activate(). Pointed out by ws in a private message.
2001-03-26 18:52:29 +00:00
ded6fe39cd
bump version to 1.9: ELF and MI loadfile().
2001-03-26 15:36:48 +00:00
20ba07f2fe
- add dev_noimpl(xxx,yyy) macro to replace "(dev_type_xxx((*))) yyy",
...
and use appropriately
- create more helper macros:
. cdev__xyz_init(c,n), such as cdev__ocri_init() for
/* open, close, read, ioctl */, etc.
. cdev__xRy_init(c,n), where nullop is used instead of enodev to dummy out
method `R' and the comments now read /* xxx (read) yyy */ instead
. cdev__xyz_t_init(c,n,t) - as per cdev__xyz_init, but sets d_type = t
as well
- use seltrue instead of dev_noimpl(poll,*), as (IIRC) cdevsw.d_poll should
always DTRT WRT returning a valid result. (a few devices previously
incorrectly returned ENODEV)
- use dev_noimpl(stop,enodev) instead of dev_noimpl(stop,nullop) if tty
== 0, because it doesn't matter if dev_type_stop isn't implemented in that
case, and it allows the use of the cdev__xyz_init macros. certain ports
(sparc,sparc64,x68k) used the nullop method for dev_type_stop in a few
drivers, whereas everything else uses enodev
- ensure that the comments are accurate WRT the behaviour of a given entry
2001-03-26 12:33:22 +00:00
7e28d29b32
- MI loadfile() returns a file descriptor, not errno.
...
(error is printed in MI loadfile() anyway)
- Make sure to try to load all default kernel names,
including netbsd.sun3[x].
Now sun3 ELF based miniroot works properly on my 3/80.
2001-03-26 11:54:50 +00:00
09bedcf84f
Add GENERIC_TINY config for low memory (and slow) machines.
2001-03-26 10:25:34 +00:00
6c5da9bd76
o Change initialization for config_hook() base lcd control.
...
o Fix backlight control in case that light is controlable but not be
able to get status.
o change some verbose prints.
2001-03-26 09:40:45 +00:00
887d70ab8f
CONFIG_HOOK_GET support for get current port status.
2001-03-26 08:57:02 +00:00
903b8688da
The interface to `setdisplay' was implemented wrong. The utility stated the number
...
of bits per pixel instead of the log2_bpp as assumed (since the rest uses this).
2001-03-25 21:25:35 +00:00
113c9ed888
recompile.
2001-03-25 17:16:33 +00:00
e78f561e10
speed up physical address detect routine. (MemoryManager_VirtualCopy)
2001-03-25 17:14:53 +00:00
24beb5ffb9
support 'reverse video' option.
2001-03-25 17:14:04 +00:00
c31816f70c
selectable serial console speed.
2001-03-25 17:13:15 +00:00
0e72b76163
Missing changes to the last update, making this compile (and work) again.
2001-03-25 16:14:00 +00:00
ed26af9e66
recognize hpcboot.exe's ELF symbol table.
2001-03-25 15:15:18 +00:00
44e4c53338
Add MQ200_USECRT option, which enables CRT output on MC/R530.
...
This is kernel configuration option and you can't enable and disable CRT
dynamically for now.
2001-03-25 13:06:52 +00:00
bea77d06a2
Add #ifndef _HPC_PLATID_H_.
2001-03-25 12:17:35 +00:00
b53fce84d3
Add an autoconfig node for PCI-MCA bridges. Configures MCA bridges
...
via callback. This beast is very rare, present only on some IBM PCs.
Code was copied off pceb.
2001-03-25 09:54:10 +00:00
5b36d84a9c
Don't panic until DEFCON 1.
2001-03-25 06:38:50 +00:00
a45ca84ab5
Verbose display of machine check errors on AS200/400 boxes.
2001-03-25 05:52:38 +00:00
8edd158910
MI(ish) EtherB driver using the MI SEEQ 8005 driver. Very lightly tested.
2001-03-25 01:09:36 +00:00
cbe4d910da
It might be useful if I actually filled in the interrupt handle for
...
podulebus_irq_establish() to use.
2001-03-25 00:56:58 +00:00
f283c0a504
Use ${THISSH3} instead of ../.. ; not everyone builds in ../compile/FOO
2001-03-24 18:26:11 +00:00
c5956b89f8
change backlihght parameter value type to int8_t.
2001-03-24 16:08:36 +00:00
8c78f7fad3
add vrc4172pwm for MC/R520A(MobilePro770)
2001-03-24 15:56:59 +00:00
1907b28be1
add MobilePro770(MC/R520A) parameters.
2001-03-24 15:53:37 +00:00
478c6ce6b9
Adjust to new hardware driver <-> isdn layer 2 and above sheme.
2001-03-24 12:45:15 +00:00
132a113507
Do not hardcode the kernel segment register, and do not load the kernel
...
segment register in pmap_activate().
2001-03-24 05:30:57 +00:00
728aee3ccb
Some bios's when apm is disabled [or even some functions of it are disabled],
...
they keep giving error 0x30b. Unfortunately this keeps happening every second
making the console unusable. Keep track of the last error that occurred and
if the last 10 times apm was called the same error was returned, give up and
exit the apm thread.
2001-03-24 02:07:54 +00:00
8bd452c648
Create an MI Ether3 driver. It's derived from the arm26 driver, which uses
...
my MI SEEQ 8005 driver, which is based on the arm32 ea driver.
2001-03-24 00:14:52 +00:00
2714607c72
Add podulebus_shift_tag, which generates a bus_space_tag_t with a specified
...
address shift (stride). This is necessary because many podules have standard
chips with odd address-bus wiring to allow for using LDM for
bus_space_*_multi_*().
2001-03-24 00:10:42 +00:00
75b7bea508
Add MCA we(4) attachment for WD80x3 cards and clones. Tested with
...
WD8003W/A, card provided by David Brownlee (thanks!). The SMC Elite stuff not
tested since I don't have any; hopefully it's correct, should match
information in ADF files.
The MCA-specific init quirk taken from Linux smc-mca.c driver.
I don't quite grok why it works, but it does *cross fingers*.
The WD8003W/A seems to be quite a good choice. I get like 340KB/s on my
machine, where 3c523 does only like 310KB/s. The numbers would be probably
even better with faster CPU than 386DX :)
2001-03-23 19:25:35 +00:00
d2f3ad2de2
Support machdep.booted_kernel sysctl.
2001-03-23 11:10:10 +00:00
8f5f11180a
o add sysctl machdep.booted_kernel support.
...
o add sysctl machdep.root_devoce support.
2001-03-23 11:09:49 +00:00
95a27e3b60
Remove devices which don't exist on floppy based models.
...
Now boot floppy fits 1.4MB again.
2001-03-23 09:30:49 +00:00
7ed6dadd10
Handle bootargs passed by hpcboot.
...
Change stack pointer initialization.
2001-03-23 08:58:14 +00:00
3bf1867147
Rebuild after the bootarg change.
2001-03-23 08:51:23 +00:00
59b3c088fe
Pass bootargs like usual function calls.
...
Initialize sp register to more useful value.
2001-03-23 08:48:12 +00:00
07b77f05ce
Have LINEBYTES for jornada720.
2001-03-23 08:46:56 +00:00
5aa49b6404
Delete unused uvtopte() macro.
2001-03-23 01:27:59 +00:00
b47f68b66c
fix 'show registers' mis-aligned access, PR11580
2001-03-22 22:20:28 +00:00
40de0e48b0
add ELF kernel linker script.
2001-03-22 18:35:33 +00:00
5a79dd1121
load symbol table to DDB if ELF kernel.
2001-03-22 18:34:08 +00:00
7060cad775
recompile.
2001-03-22 18:30:49 +00:00
4e6c980fa0
add HD64461 UART serial console.
...
add SH3 SCI console method
add SH3 TMU register dump
use generic serial console when companion chip is unknown.
2001-03-22 18:27:51 +00:00
a7876b44d8
add file logging method.
2001-03-22 18:26:45 +00:00
044f4eb367
fix calcurating kernend bug.
2001-03-22 18:23:08 +00:00
87aeed6110
fix file handle leek.
2001-03-22 18:21:02 +00:00
bf58a25f9b
weakly machine dependent configuration moved to machine_config.cpp
2001-03-22 18:20:35 +00:00
62bef7c830
fix file pointer bug.
2001-03-22 18:19:36 +00:00
f0190d355c
add machine independent serial console method. (use WinCE API)
2001-03-22 18:19:09 +00:00
985f960311
add HP Jornada 690 Hungarian, German entry and
...
my target machines (CASIO Cassiopeia A-55V, HITACHI PERSONA HPW-650PA).
2001-03-22 18:16:13 +00:00
031c6d8c24
Add MCA ep(4) attachment, for 3Com 3c529-type cards. Tested with 3c529-TP,
...
provided to me by David Brownlee (thanks!).
Performance of this card is quite poor on my PS/2 with 386DX, like 100KB/s
at best, but as low as 5KB/s when transferring bigger files due to
packet overruns. It would be good to revisit this later, probably by
teaching the ic code to use RX Early.
2001-03-22 16:54:45 +00:00
74786e7894
remove overzealous locking changes.
2001-03-22 15:56:43 +00:00
23d323f4f9
Sync with amiga 1.15.
...
Make this compile again (when building the LKMs).
2001-03-22 12:47:11 +00:00
b711716241
A bit of ELF support. From scw.
2001-03-22 12:46:19 +00:00
2282e42ec2
Fix type in pliptransmit declaration (C version). Noticed by
...
Tyrel Beede <tb90@mail.csuchico.edu>.
2001-03-22 08:14:23 +00:00
0fa02bb6e6
sync with sparc64.
2001-03-22 06:21:43 +00:00
e563dea3f6
sync with sparc64 (just some debug messages.)
2001-03-22 06:21:15 +00:00
ce8902b7fe
Merge my MP tree. At this point, Daystar dual 604 card (i.e. Power Macintosh
...
9500/180MP and 9600/200MP) runs at least into single-user mode, possibly
multi-user mode (not stable yet).
2001-03-22 04:11:46 +00:00
2d6322c3be
Handle ELF symbol table.
2001-03-22 03:45:39 +00:00
9f60674a47
now that duplicated stuff has been moved to sys/conf.h, remove unnecessary
...
defs for: lpt, joy, pc
2001-03-21 23:42:14 +00:00
723cd818d8
move duplicate definitions for:
...
pc, lpt, joy, ocis, apm, satlink, i4bctl, i4brbch, i4btel, i4btrc, i4b
from the port-specific arch/*/*/conf.c files into sys/conf.h
2001-03-21 22:25:52 +00:00
4a933b0a25
VAX_STYP_690 added, from Lord Isildur.
2001-03-21 21:11:13 +00:00
912c115675
s/vm_page_alloc_memory/uvm_pglistalloc/ in panic message.
2001-03-21 18:40:28 +00:00
7e9512010c
Oops. I forgot this line.
2001-03-21 17:43:39 +00:00
4b32677535
Map DMA controller and disable its DMA channels.
2001-03-21 17:42:37 +00:00
f8dab8e69a
Make card insertion/removal work.
...
XXX powerdown and {io,mem}_unmap are still missing.
2001-03-21 16:16:35 +00:00
7c429e90c2
Handle interrupt polarity.
2001-03-21 16:08:34 +00:00
f1b9737b90
Fix nit.
2001-03-21 14:48:30 +00:00
d16849a006
Make this compile again.
2001-03-21 14:40:00 +00:00
b0b31f8cfc
Rebuild binaries after ELF symbol table support.
2001-03-21 14:18:28 +00:00
8c60f09e43
- Use ${PRINTOBJDIR}
...
- size -> ${SIZE}
2001-03-21 14:08:03 +00:00
358a8ee71a
Load ELF symbol table for DDB.
2001-03-21 14:06:25 +00:00
5b519fb0f9
Fill in framebuffer address for jornada720.
2001-03-21 14:05:10 +00:00
45480ac3bc
Move rules to create m68k and machine symlinks to common Makefile.inc.
2001-03-21 13:43:58 +00:00
577fa61b83
Enable interrupts before calling interrupt handler(s).
2001-03-21 11:38:39 +00:00
34e44075e0
- Remove "NOMAN= yes"
...
- Use "WARNS?= 1" rather than add warning options to COPTS.
2001-03-21 11:08:52 +00:00
650e6506dc
Remove "NOxxx= yes" lines since "MKxxx= no" is enough.
2001-03-21 11:02:24 +00:00
9ae0cb4d12
Make sure to create m68k and machine symlinks to include loadfile_machdep.h.
2001-03-21 10:58:54 +00:00
47e6a41505
only lock the kernel around sy_call if !SYCALL_MPSAFE
2001-03-21 09:01:16 +00:00
11fe9ca446
use ubc_winshift instead of ubc_winsize in pmaps to set up kernel
...
virtual space. the latter isn't initialized yet when the value is needed.
fixes PR 12440.
2001-03-21 03:16:05 +00:00
af58b235e0
adapt to systems with out interrupt-map & interrupt-map-mask properties.
2001-03-21 01:33:47 +00:00
b54ea24924
Merge in4_cksum().
2001-03-21 00:38:47 +00:00
de59def2f2
Remove spurious #define mod_base.
2001-03-20 23:29:07 +00:00
998606396f
Move struct podule_list and struct podule_description to podulebus.h.
...
They're MI, even if only arm32 actually uses them at present.
2001-03-20 23:27:04 +00:00
86d6442c28
Move machine-dependent podulebus headers to <machine/podulebus_machdep.h>.
...
<dev/podulebus/podulebus.h> is the canonical file to include, and includes
<machine/podulebus_machdep.h>.
<arch/${MACHINE}/poudulebus/podulebus.h> remains for backward compatibility.
2001-03-20 22:59:39 +00:00
61e80eef9b
As Richard Earnshaw pointed out, bus_space_copy_1() and bus_space_copy_2()
...
had the wrong names and did the wrong things. Both are now fixed.
2001-03-20 22:56:16 +00:00
df2b9ae2bd
Initial commit of wscons for the RiscPC/A7000 arm32 family. There is still lots
...
to do notably the mouse, some issues about 4 bpp modes and most of all Xwscons !
This code will still allow usage of the old vidcconsole complete with X etc.
Note that the wscons code can now only be booted with the new bootloader but
kernels compiled with vidcconsole can still be booted the old way.
2001-03-20 18:20:53 +00:00
1f21d8b280
hpcarm kernel is ELF.
2001-03-20 18:01:49 +00:00
b4095cd8bf
support HITACHI PERSONA configuration.
2001-03-20 16:05:42 +00:00
889e6d332a
initialize TMU
2001-03-20 16:04:01 +00:00
39081f8af1
make HD64461 UART module usable on HITACHI PERSONA
2001-03-20 16:03:28 +00:00
dc7eafe744
Redo previous. Instead of defining another type, mask upper bits of pvr.
2001-03-20 15:52:07 +00:00
482f11868a
Added dependency for "VIDCCONSOLE" (old console code) for the physcon char
...
device on console (makedev(4,0)) to aid in wscons transition.
2001-03-20 15:39:16 +00:00
adbed15428
Replace `bitsperpixel' by `log2_bpp' for thats the value that is in it
...
and not the number of bits per pixel !
2001-03-20 12:52:03 +00:00
e8f67fd5b7
`bitsperpixel' in the bootconfig structure is replaced by `log2_bpp'
...
for thats the value that is in it anyway and not the number of bits per pixel !
This to avoid confusion.
2001-03-20 12:50:08 +00:00
2ac5b2f7cf
Replace `bitsperpixel' by `log2_bpp' for thats the value that is in it
...
and not the number of bits per pixel !
2001-03-20 12:48:37 +00:00
96184e84cf
Add a diagnostic when we encounter an unknown boot device type.
2001-03-20 05:51:35 +00:00
7fec679447
sync to GENERIC 1.400
2001-03-20 05:49:32 +00:00
0fe2c0aedc
These have moved to sys/dev/podulebus.
2001-03-20 00:13:16 +00:00
2c4e09f4c9
Revert last change, which shouldn't have applied to this file.
2001-03-20 00:04:28 +00:00
23836945a3
Redefine bus_space_addr_t to be a raw address, for compatibility with arm32
...
podulebus drivers.
2001-03-20 00:03:10 +00:00
34cca2e23e
Pull in shared podulebus drivers.
2001-03-20 00:01:37 +00:00
2821b16ef4
Quick hack implementation of region ops. Not very pretty, but good enough
...
to get ei(4) working on arm32.
2001-03-19 23:56:45 +00:00
4d5762c860
This file depends on <machine/io.h>.
2001-03-19 23:03:59 +00:00
e7cc62cc44
A few #defines for the common podulebus API.
2001-03-19 22:59:13 +00:00
51e6b460ab
Slightly smaller code and tune for StrongARM.
2001-03-19 22:51:51 +00:00
1360c6c34c
add com at mca, bpfilter
...
add comment for elmc, describing what it is for
2001-03-19 22:08:17 +00:00
1c300d3ee8
Make pa_*_base bus_addr_ts.
2001-03-19 21:03:47 +00:00
7ba79ec9f4
Switch news68k to ELF:
...
- Move options EXEC_ELF32 to std.news68k
2001-03-19 17:06:11 +00:00
e0694eb01f
Switch news68k to ELF:
...
- Move options EXEC_ELF32 to std.news68k
- Add options COMPAT_AOUT_M68K to each config file
2001-03-19 16:59:19 +00:00
0b2a9fa53d
kill QUOTA on everglades.
2001-03-19 05:35:51 +00:00
c40daf0aed
change uvm_winsize to uvm_winshift so that we can avoid division
...
by a non-constant value.
2001-03-19 00:29:03 +00:00
e47583af2c
missed some KERN_FAILUREs.
2001-03-18 23:43:53 +00:00
77d7115444
Spelling mistake (saftey -> safety). No functional change.
2001-03-18 18:49:37 +00:00
e533061fce
in mem_access_fault*(), when invoking the pcb_onfault mechanism, pass the
...
return value of uvm_fault() to the onfault routine via %o0. users of
pcb_onfault now return this value to their callers rather than always
returning EFAULT. this allows i/o errors in VOP_GETPAGES() to be returned
back to read(), etc.
2001-03-18 17:11:22 +00:00
f8ffa07954
Always restore the spl value when returning form physconkbd.
2001-03-18 17:03:26 +00:00
62dd3b3608
Fix a couple of cases where we could return without restoring the
...
SPL value. Fixes a problem with the Xserver on A7000 kernels.
2001-03-18 17:00:56 +00:00
614827277d
Switch over to using podulebus_irq_establish().
2001-03-18 16:58:55 +00:00
5c98fe3fec
Gratuitous change of signature for podulebus_irq_establish(). It now takes
...
an opaque podulebus_intr_handle_t, which can be found in podulebus_attach_args.
It's actually the slot number, but don't tell anyone.
2001-03-18 15:56:04 +00:00
846f79ea76
LAMB uses nonstandard timer frequency. set TIMER_FREQ to appropriate
...
value (otherwise severe clock delay will result).
http://www.wildlab.com/bbs/logview.cgi?pg=9&no=521
2001-03-18 15:24:14 +00:00
3bb2b205f9
show the cpu a process is running on in proc
2001-03-18 14:24:10 +00:00
45d39a2030
redo previous slightly differently.
2001-03-18 14:10:34 +00:00
e82b5bb630
"mach slock" for simple_locks
2001-03-18 14:06:10 +00:00
949f93d279
If uvm_fault() returns an error, pass it on to the pcb_onfault handler
...
if there is one. They already arrange to return it to their callers.
2001-03-18 14:04:04 +00:00
1fae55f3ae
in trap(), when invoking the pcb_onfault mechanism, pass the return value
...
of uvm_fault() to the onfault routine via %eax. users of pcb_onfault now
return this value to their callers rather than always returning EFAULT.
this allows i/o errors in VOP_GETPAGES() to be returned back to read(), etc.
2001-03-18 02:53:09 +00:00
6c42a5d73a
Move over to using podulebus_irq_establish.
2001-03-18 01:31:03 +00:00
63059bd6dc
Remove redundant sc_ih from struct ea_softc.
2001-03-18 01:30:30 +00:00
b369fdfd44
Use podulebus_irq_establish().
...
To avoid complexity, don't bother with ea_irq_claim() and ea_irq_release() any
more. This driver will be replaced with an MI one soon eough -- it just
happened to be convenient for me to test.
2001-03-18 00:00:43 +00:00
f98a674d6d
Add podulebus_irq_establish(), with the same spec as the arm26 one.
2001-03-17 23:58:43 +00:00
d7e64c2e21
Method array for a really big inter-byte offset.
2001-03-17 22:03:12 +00:00
16198f2b92
Podulebus convergence:
...
pa_memc_[th] -> pa_mod_[th]
Add pa_easi_*
Add pa_*_base
Add pa_slot_flags to indicate whether EASI is supported.
2001-03-17 21:56:06 +00:00
14d2d5706f
Conditionalize inclusion of the interrupt handlers for 'kbd', 'zs' and
...
'ncrscsi' since they are not present on the Milan.
2001-03-17 20:56:31 +00:00
697e84ed46
Update for new location of podules.h and podule_data.h
2001-03-17 20:34:43 +00:00
e6a3d0d5c9
Move generated files from sys/arch/arm32/podulebus to sys/dev/podulebus.
2001-03-17 20:32:00 +00:00
255336b13c
Migrate known-podules list from arch/arm32/podulebus to dev/podulebus.
2001-03-17 19:05:19 +00:00
17b6222740
Small beginnings of podulebus convergence: Have podule drivers print colons
...
in attach messages, rather than doing it in podulebusprint().
2001-03-17 18:46:25 +00:00
bfc2063e69
Create an ARM2-specific undefined-instruction handler which deals with the
...
undef/SWI bug and handles emulating SWP.
Untested bacuse my ARM2 machine isn't currently set up.
2001-03-17 18:12:09 +00:00
3261555469
bump maxusers to 8
2001-03-17 09:55:32 +00:00
f3d3e9a30e
add elmc(4)
...
convert from memory disk to diskless-type config
2001-03-17 09:53:54 +00:00
0fcd32a415
"mach cpu" is MP only.
2001-03-17 01:54:17 +00:00
a5fdf3f1cf
Atari specific stuff to implement the Milan floppy. The Milan uses standard
...
ISA floppy hardware. Configure as:
fdcisa0 at isa? port 0x3f0 irq 6 drq 2
2001-03-16 21:31:55 +00:00
fab9e9b3bb
sc_port_units was set incorrectly at probe time.
2001-03-16 19:57:49 +00:00
9dfd56f6dc
Make this compile with "options DEBUG" again.
2001-03-16 18:11:57 +00:00
cda43785c6
Add comment on what 'overtemp' is about. OK'd by eeh.
2001-03-16 10:47:25 +00:00
e44f962032
steal a few mach commands from sparc64. add a #if 0'ed "mach cpu"
2001-03-16 10:28:53 +00:00
48fc32e16e
#ifdef DDB, add new function cpu_debug_dump(). define CPU_INFO_ITERATOR and
...
CPU_INFO_FOREACH.
2001-03-16 10:26:11 +00:00
e679c63257
Accept 8000Hz (XXX).
2001-03-15 19:55:16 +00:00
5eab0287fb
Use write-through caching for video ram. (Disabled by default, for now.)
2001-03-15 19:48:04 +00:00
4382a59d64
Add ulinear16 support.
...
Return EINVAL if specified rate is not available.
2001-03-15 19:42:42 +00:00
054158f994
HD64461 UART module support.
2001-03-15 17:30:55 +00:00
106c0aee60
setup bootinfo.bi_cnuse at bootloader phase.
2001-03-15 17:24:45 +00:00
123c25cc93
Remove PAGER_MAP_SIZE definition -- use default value. Instead, decrease
...
VM_MAX_KERNEL_BUF.
2001-03-15 16:06:59 +00:00
ac3bc537bd
eliminate the KERN_* error codes in favor of the traditional E* codes.
...
the mapping is:
KERN_SUCCESS 0
KERN_INVALID_ADDRESS EFAULT
KERN_PROTECTION_FAILURE EACCES
KERN_NO_SPACE ENOMEM
KERN_INVALID_ARGUMENT EINVAL
KERN_FAILURE various, mostly turn into KASSERTs
KERN_RESOURCE_SHORTAGE ENOMEM
KERN_NOT_RECEIVER <unused>
KERN_NO_ACCESS <unused>
KERN_PAGES_LOCKED <unused>
2001-03-15 06:10:32 +00:00
ef26546e15
lock the kernel around calling interrupt stubs.
2001-03-15 03:20:43 +00:00
122b3a0e67
sprinkle KERNEL_LOCK() and KERNEL_PROC_LOCK() where they're missing. add
...
SYSCALL_DEBUG support to trap.c.
2001-03-15 03:01:39 +00:00
c08eec9f47
Use hpc/hpc/disksubr.c.
2001-03-14 14:47:40 +00:00
300d398485
Move references to arm/arm/disksubr*.c from files.arm to
...
files.{arm26,arm32,dnard}.
2001-03-14 14:39:45 +00:00
b612a766a7
Handle overtemp intr.
2001-03-14 00:52:19 +00:00
c3c5158d00
Change the value of tf_pc in undefined-instruction handlers on arm32. It now
...
always points to the undefined instruction in question. It's up to the
handler to advance it to the next instruction if it wants execution to
continue there. This is how things have always worked on arm26.
2001-03-13 23:56:48 +00:00
ce3ad2275b
Update FPU detection to use remove_coproc_handler().
2001-03-13 23:51:48 +00:00
a7ba6bb441
Update for new linked-list undefined-instruction handler.
2001-03-13 21:00:13 +00:00
aebf9049d4
Update to use install_coproc_handler_static(), since install_coproc_handler()
...
isn't safe this early.
XXX hpcarm should use db_machine_init() to do this.
2001-03-13 20:52:48 +00:00
c72a18bddc
Separate out the SIGTRAP (gdb breakpoint) generator from undefinedinstruction()
...
so it's no longer a special case.
2001-03-13 20:22:02 +00:00
db1f089718
Initialise the undefined-instruction handler at startup.
2001-03-13 20:20:43 +00:00
bb17ec14d3
Conditionalise inclusion of opt_compat_svr4.h for the benefit of LKMs.
2001-03-13 18:47:19 +00:00
2e79fe1ec7
add SH4 configuration.
...
(SH) don't access SCIF if the Windows CE's COM1 is not connected to SCIF.
2001-03-13 16:31:29 +00:00
43bd337868
Update for recent changes to the MI i82586 driver.
...
(added 'why' argument to the channel attention hook function)
2001-03-13 16:31:14 +00:00
ae8397d1f8
comment out:options WSDISPLAY_DEFAULTSCREENS=4
2001-03-13 03:44:23 +00:00
e2e5c62d49
Make this compile again (when building the LKMs).
2001-03-12 21:00:02 +00:00
c1faa5c059
enabled COMPAT_LINUX for sandpoint
2001-03-12 20:10:06 +00:00
c79d6f4378
Fix typo in comment reported by Yuji Yamano in kern/12391.
2001-03-12 17:26:37 +00:00
9f1a6e07a4
Round up block size to at least NBPG bytes.
2001-03-12 15:41:52 +00:00
ee1d25e7bd
* assume backlight is on if backlight value cannot get.
...
* move the lcd control codes used config_hook_call()
in *_hardpower() to *_power().
2001-03-12 08:54:25 +00:00
859d83dd22
* vrc4172pwm_get_light() return the value masked by VRC2_PWM_LCDEN_MASK.
...
* when resume from suepend, restore saved value instead of always on.
2001-03-12 08:46:27 +00:00
1bb261e173
Fix interrupt handling somewhat so that break signal gets DDB.
2001-03-12 03:27:18 +00:00
e4a4f09fa8
Make this compile again; chan_attn() prototype has changed.
2001-03-11 20:24:52 +00:00
1c10294eb2
ELF ABI requires address to be returned in A0.
...
Change an external reference from absolute address to PC-relative.
2001-03-11 20:15:02 +00:00
5a182288c0
ELF ABI requires address to be returned in A0.
2001-03-11 20:10:04 +00:00
fredette