fe02fcfe1e
GENERIC configration includes Cassiopeia E-55 CF card support.
2000-03-08 14:53:33 +00:00
5913106c36
add '%INCLUDES'.
2000-03-07 04:17:27 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
5c2ef51018
Add '\Storage Card1\netbsd'.
2000-03-06 13:24:12 +00:00
84b24dcb3a
cosmetic change.
2000-03-05 10:03:16 +00:00
775240e015
Delete #ifdef USE_RASTERCONS lines, which are not used.
2000-03-05 08:49:06 +00:00
45db29b1b3
Delete #ifdef USE_RASTERCONS lines, which are not used.
2000-03-05 06:24:33 +00:00
303401ce32
Change bus_addr_t and bus_size_t from u_int32_t to u_long.
...
Add -Werror option to kernel Makefile.
2000-03-05 05:22:12 +00:00
2aad5afc67
Add ISA DMA support entries. (It's dummy. I don't know if it work or not.)
2000-03-05 04:34:06 +00:00
062700843c
Make it easier to cross-compile with this. moreover.
2000-03-04 19:52:26 +00:00
937f50798e
adjust retry count for TX3922
2000-03-04 19:36:34 +00:00
06f8a39446
timeout when DMA interrupt lost.
2000-03-04 19:35:36 +00:00
ac09284927
Change 'irq' locater encoding. You can use port# 0. You should use 0xff
...
for unspecified port#. Also, You can specify interrupt level/edge, high/low
and through/hold.
2000-03-04 13:43:19 +00:00
bac061b47f
sync with my latest.
2000-03-04 11:41:48 +00:00
461e3d82a4
adjust SIBSCLK to 9.216MHz (TX3922)
2000-03-04 11:39:29 +00:00
630279a800
add device file interface for UCB1200
2000-03-03 19:54:34 +00:00
8e89a8db7e
cosmetic change
2000-03-03 17:09:57 +00:00
8cc92d88cf
Add USB tty device.
2000-02-29 19:08:54 +00:00
32817a3257
WSMOUSE_SCALIBCOORDS had not worked because ioctrl code was wrong.
2000-02-28 12:34:31 +00:00
dc8f1b2cb9
UCB1200 GPIO support.
2000-02-27 16:37:50 +00:00
c26429fac5
UCB1200 GPIO routines.
2000-02-27 16:34:13 +00:00
fc0a27a970
cosmetic changes
2000-02-27 16:28:13 +00:00
b22af17c02
Add 'Sharp HC-1200' and divide MC-CS1x into MC-CS11, 12 and 13.
2000-02-27 05:47:34 +00:00
e0f169f58e
change power up sequence.
2000-02-26 15:16:19 +00:00
d4c8fabc4a
fix lost interrupt bug.
2000-02-26 15:14:19 +00:00
2d3ab1ef0c
stop memory probing at first memory image.
...
this is necessary for MC-CS12.
2000-02-25 11:20:20 +00:00
54ffe9e871
Only pay attention to controller 1 on the pcic. It appears that on this
...
machine it mirrors (but is not usable as) controller 0.
XXX Need to find a way to detect this automatically.
2000-02-25 05:28:42 +00:00
01ef320ff1
Add `\My Documents\' to the menu of kernel locations.
2000-02-25 03:38:59 +00:00
108b65903a
Fix an obscure bug:
...
If we enter DDB from the keyboard, kc_scandata[] wasn't updated before the
debugger was entered, and the first call to cngetc() would see the ESC and
stack another DDB entry on top. This was... poor.
2000-02-25 00:42:47 +00:00
71b18d9041
Make it easier to cross-compile with this.
2000-02-24 21:59:13 +00:00
d7e9d324f9
reflect recent <mips/types.h>: mips is now vm_offset_t/vm_size_t clean
2000-02-22 12:29:56 +00:00
7a91879a6d
delete warning.
2000-02-22 04:11:24 +00:00
26f41e8f13
support non-contiguous memory.
...
patch from Mycroft <root@ihack.net> and uch@netbsd.org .
tested hardware:
VR4121 IBM WorkPad z50 (48MB, 16MB)
VR4121 NEC Mobile Gear II MC/R730
TX3912 Compaq C-series 810 (20MB), 2010c (20MB, 16MB)
TX3922 Sharp Telios HC-AJ2 (32MB)
2000-02-21 13:46:02 +00:00
fa120e391e
On [port-hpcmips-ja@jp.netbsd.org:1764]
...
suz@hpc.bs1.fc.nec.co.jp (Koji Suzuki) writes
Sample configration for cassipeia E-55 & E-500
// wdc1 line deleted from original.
2000-02-19 15:01:33 +00:00
fb5d3e9da4
Enable DDB history.
2000-02-19 06:58:28 +00:00
e7cfaf8f5b
Actually, it looks like the mouse is there.
2000-02-18 23:11:20 +00:00
640bdcd6cf
Document some things that are missing.
2000-02-18 23:10:01 +00:00
f1d350ea27
Somewhat scaled-down config for a WorkPad.
...
Uses WSEMUL_SUN so I can get multi-line scrolling.
2000-02-18 20:52:15 +00:00
fec6c976f3
Make the z50 tab key work.
2000-02-18 06:54:47 +00:00
c41cbbb8b7
Fix obvious typo.
2000-02-17 22:16:31 +00:00
760d110b96
Regen.
2000-02-17 21:31:39 +00:00
b95959c4c8
Give platid_name_table_size a type.
2000-02-17 21:31:13 +00:00
14af97fa26
add Sharp HC-1200
2000-02-14 07:22:19 +00:00
2d09174cce
regen.
2000-02-14 07:19:25 +00:00
f009580118
add Sharp HC-1200
2000-02-14 06:55:36 +00:00
e9c7fb4c36
change ramdisk size.
2000-02-12 13:48:46 +00:00
49ac0acd83
delete NKMEMCLUSTERS from configuration files.
2000-02-12 03:21:06 +00:00
160bf15b09
Add com0's power control ID.
2000-02-11 03:20:17 +00:00
18452e3667
- add GPIO related comments.
...
- add IBM WorkPad z50 buttons.
2000-02-10 08:45:44 +00:00
709f6f50a2
show edge/level infomation in attach message.
2000-02-10 08:37:07 +00:00
e19b30ff0a
delete \n in cpu_model.
2000-02-10 08:34:08 +00:00
1dd1e143a9
add machine model name to cpu_model.
2000-02-10 02:15:01 +00:00
549e292ae4
update MINYEAR.
2000-02-10 02:06:16 +00:00
968822bd48
The pwctl writes ZERO as on if active=0.
2000-02-09 14:39:06 +00:00
0694de05ed
Fix Work Pad z50's entry.
2000-02-09 13:03:31 +00:00
ad591b78f4
CLOCK_RATE: 256-> 128.
...
reduce timer interrupts because hpcmips machines are lower cpu power.
2000-02-09 10:41:18 +00:00
06aa6ffcb9
Delete dupicated 'z50'.
2000-02-06 14:02:42 +00:00
1a8f3a2b75
Add platid_name() which retrieves the platform name.
2000-02-06 08:47:03 +00:00
a4746f91c3
choose first keymap that matches.
...
Otherwise, the NEC MobilePro 770 chooses the wrong one.
This is consistent with keymap searching order from before revision 1.12,
although I haven't investigated why choosing the last match instead of the first
causes the MobilePro 770 to lose
2000-02-06 06:29:22 +00:00
be8a1b19f0
more CR/NL -> NL conversion (some crept in)
2000-02-05 03:25:26 +00:00
7d16ac338c
add __BROKEN_CONFIG_UNIT_USAGE #define, becuase these ports do very
...
wrong things with device configuration data "cf_unit" information.
2000-02-05 00:13:22 +00:00
11ee920b54
rename printf.c to winprintf.c, nuke inclusion of libsa's printf.c
...
in winprintf.c, and directly include libsa's printf.c in the project.
2000-02-03 19:46:21 +00:00
dd74df567d
no more need for one-liners to include libsa .c files. just name them
...
directly in the project file.
2000-02-03 19:32:37 +00:00
ed17755cec
clean up lists: get rid of bogus extra spaces, backslash -> slash
...
(vc doesn't care, in paths of source files), sort, etc.
2000-02-03 19:27:56 +00:00
ff6ae74e98
tolerate newlines in the list variables, and clean up the config files
...
to match. no more ridiculously long lines, now!
2000-02-03 19:16:47 +00:00
8d0ed726af
nuke inclusion of compat.h
2000-02-03 03:21:52 +00:00
00e405865e
nuke inclusion of compat.h, fix typo in comment about #ifdef
2000-02-03 03:21:23 +00:00
239dc2e799
add __STDC__ to CPP define list
2000-02-03 03:20:33 +00:00
c84d83a616
nuke inclusion of compat.h
2000-02-03 03:20:03 +00:00
19c2a289e7
add bzero.c to file list, add __STDC__ to CPP define list
2000-02-03 03:19:11 +00:00
ce844666c1
stub to pull in libsa bzero.c
2000-02-03 03:18:28 +00:00
3772a52ffc
just use __int64 and unsigned __int64 rather than *INT64TYPE
2000-02-03 03:17:23 +00:00
62bc319e2c
add '#ifdef VR41X1' for TX3900.
2000-02-02 03:14:31 +00:00
11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
dbbc9025d2
Add 'Reverse Video' check box.
...
Now 'Black-on-White screen is default.
2000-01-31 12:45:29 +00:00
fdd3f14b2a
add BTN_COVER for MC-R700, MC/R730.
2000-01-31 11:44:01 +00:00
ae6160e233
CPU specific idle hook and VR idle routine.
2000-01-28 15:08:36 +00:00
48205b1acc
Delete unused lines.
2000-01-28 15:02:11 +00:00
e35089652c
platid regen.
2000-01-28 06:22:53 +00:00
8f9ba8c314
add MC/R730
2000-01-28 06:22:10 +00:00
69cb6f62a5
add MC/R730 platid.
2000-01-28 06:21:49 +00:00
76d3003c00
- add MC-R510 & MC-R530 cover button.
...
- add MC-R530 application dial button.
- add comment for no RTC_OFFSET.
2000-01-27 06:55:26 +00:00
6591d38772
- modify debug stuff.
...
default all disable.
2000-01-27 06:28:41 +00:00
9dbdea95dd
- show bus clock freq setting and memory clock freq setting in boot time.
2000-01-27 06:25:54 +00:00
674bb73d1e
- fix using uninitialized argument of bitdisp64().
2000-01-27 06:23:05 +00:00
b59afe2607
- fb_mmap(): treate about unaligned framebuffer memory (MC-R510).
2000-01-27 06:18:03 +00:00
8eb798e603
define a "BUS_SPACE_MAP_PREFETCHABLE" flag which basically means that
...
device accesses are idempotent (but should not be cached by the CPU)
2000-01-25 22:13:17 +00:00
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
7e5ff67457
Add commented out "ident"-command
2000-01-23 23:46:04 +00:00
56c6e7faaf
Add a menu item for MC-R430.
...
Change frame buffer type of MC-R530, which had been inversed B/W.
2000-01-22 11:03:16 +00:00
251cab4f98
Add platform ID of MC-R430.
2000-01-22 10:51:29 +00:00
5b9cd9b86f
Fix a problem which is reported in PR port-hpcmips/9207.
...
Vrkiu_cngetc() had returned WSCONS_EVENT_ALL_KEYS_UP if there are no event to
report. Modification keys like shift-key had been canceled by that event.
2000-01-22 09:12:35 +00:00
7d6a332830
change miniroot size.
2000-01-21 11:29:53 +00:00
87e1b0f9b7
Add overlay to kernel configs.
2000-01-20 19:12:28 +00:00
a0397a2573
Move callout initialization to a single location; no need to duplicate
...
that code all over the place.
2000-01-19 20:05:30 +00:00
e61f177ab1
STRIP -> STRIPPROG
2000-01-19 16:29:54 +00:00
0b9af6bdce
check whether tv_usec >= 1000000
2000-01-19 02:52:16 +00:00
c241e27b63
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:37:58 +00:00
af0112be28
move keymap initialization into vrkiu_init().
2000-01-17 12:22:37 +00:00
114d690d03
delete unused codes.
2000-01-17 04:06:06 +00:00
f3689bd429
- no need
...
-- rtc inherit offset from WinCE.
-- keymap set by plat id.
2000-01-17 03:11:12 +00:00
0a5ac26680
enable TX3922 write-back cache.
...
flip Telios fg/bg color.
2000-01-16 23:30:13 +00:00
f96d767523
add platform dependent TX39 UART module hook.
...
remove delay from tc5165buf interrupt handler.
backlight config_hook.
2000-01-16 21:47:00 +00:00
e8460d1fcb
disable noisy boot message.
2000-01-16 21:39:36 +00:00
dac63389a8
call config_hook_init before autoconfiguration.
...
initalize hr_mode.
2000-01-16 20:01:41 +00:00
1e74db1306
RCS Id.
2000-01-16 11:14:49 +00:00
9a222ad604
remove .cvsignore files; if the tree doesn't clean completely, that's a bug
2000-01-16 08:27:40 +00:00
45dec0d12e
Convert CR/LF -> LF.
2000-01-16 03:07:22 +00:00
0a98216e35
fix mobilon hc-4100 keymap.
2000-01-14 18:37:58 +00:00
ee917c935b
TX39 IR module (connected to TX39 UARTB module)
2000-01-13 17:53:35 +00:00
d4cd1dcd2f
change '-G 32' to '-G 30' to avoid overflow(TX3912).
2000-01-13 05:32:41 +00:00
e838d6a869
these are needed due to the change in rev 1.16 of mips/include/mips_param.h
2000-01-12 19:33:18 +00:00
67fd1bd089
add clean and distclean targets. Clean cleans out build-generated bits.
...
Distclean does that, plus removes other files windows is likely to
generate to make things unclean (.opt workspace options files, as well
as automatically updated versions of .dsp/.dsw files). This means
that if you distclean: your workspace options may be reset to the defaults
(hey, you did tell it to clean everything out!), and any modifications
that you incorrectly made to the .dsp/.dsw files w/o using the templates
and UNIX-based auto-generation will be clobbered.
2000-01-12 19:19:16 +00:00
a0628e8583
set limit value and local saved configuration. return -1 if calibration failed.
2000-01-12 15:00:47 +00:00
dce2bc94e0
add UCB1200 sound module ucbsnd (core implementation only)
...
UCB1200 touch panel module moved to ucbtp and sync with vrpiu.
2000-01-12 14:56:17 +00:00
5078d19283
foist my automatically generated evil upon the world.
2000-01-12 02:46:33 +00:00
ce9a9c483e
taking evil to the next level: config files, templates, and scripts
...
to automatically generate project (.dsp) and workspace (.dsw) files
from configuration scripts for the bits that have to be built
on windows. you build by saying 'make winfiles' here in stand,
then check in (on UNIX). The versions that windows sees have to have
CR-NL line termination, so for proper use with samba the generated
files contain CRs and must be checked in on UNIX (NOT from Windows
CVS).
2000-01-12 02:33:54 +00:00
7817a37e38
WSMOUSE_SCALIBCOORDS/WSMOUSE_GCALIBCOORDS support.
2000-01-10 14:07:58 +00:00
3e70433d39
fix TX39IO port debug routine bug. (TX3912)
2000-01-09 18:56:37 +00:00
b4d582b776
md_root.c: #include "opt_mdsize.h"
...
machdep.c: add 'ifdef' to compile without 'options DDB'
2000-01-09 07:59:51 +00:00
2c751cff39
add options for sysinst (memory disk size etc.)
2000-01-09 07:57:43 +00:00
355d8b383f
add Vadem Clio and Sharp Tripad
2000-01-09 07:55:57 +00:00
ce3b031d6d
TX3912 touch panel support
...
TX3912 SIB module + ADC part of UCB1200 (companion chip of TX3912)
2000-01-08 21:07:02 +00:00
169eab5405
Update binary for MC-R530 and SHARP Mobilon HC-4100.
2000-01-08 05:25:44 +00:00
ba04c55ed3
Absolute pointing device support.
...
- Wsmouse_input() get new argument 'flag', which indicates whether x/y/z are
relative or absolute.
- Wsmouse get new io controls, WSMOUSEIO_SCALIBCOORDS and
WSMOUSEIO_GCALIBCOORDS.
2000-01-08 02:57:22 +00:00
d998f29223
p7416buf and tc5165buf are merged.
2000-01-07 15:19:12 +00:00
db8644e2c9
4bit greyscale mode currently disabled. (change to 2bit greyscale)
2000-01-07 15:10:50 +00:00
f60ef90127
implement IT8368 legacy attr mode. Mobilon requires it.
2000-01-06 18:14:25 +00:00
75961aa95f
change overrun interrupt treatment.
2000-01-06 18:11:23 +00:00
6c7f28e845
add debug draw routines.
2000-01-06 18:10:42 +00:00
f0d09739ad
regen.
2000-01-06 18:08:54 +00:00
06a9750042
add SHARP Mobilon HC-4100 entry.
2000-01-06 18:07:53 +00:00
9243684aaa
fix MC/R530 parameter.
2000-01-06 06:24:29 +00:00
44ae4c89f4
- Update for changes to 'struct wsdisplay_font'.
...
- Add RCS Id string. This should probably be in 'othersrc'.
2000-01-05 18:49:13 +00:00
42a0e30299
We can mmap frame buffer. Sorry, we had not been able to map it.
2000-01-05 15:12:42 +00:00
f56a7d0967
clean up boot message.
2000-01-03 18:29:03 +00:00
c6376f2e26
Change tx_poll_establish implementation and interface.
2000-01-03 18:24:03 +00:00
74ea35cd39
Now you can specify Windows raw device no to load the kernel in the style:
...
n:/netbsd (n=1..9)
2000-01-03 05:59:40 +00:00
28087acb02
Change COPTS to "-Os -mmemcpy" for size reduction.
...
Suggested by Simon Burge.
2000-01-01 04:46:22 +00:00
54fac7be8f
add MSDOSFS
...
delete redundant kernel 'config' lines.
add new option '-b={wd0,sd0,nfs}' to change boot device.
2000-01-01 02:22:35 +00:00
7626f63930
compile kernel with
...
-mips2 -G 32
for size reduction. Suggested by Castor Fu.
2000-01-01 02:15:38 +00:00
b4e898bafb
Fix MCS3 address.
1999-12-31 16:07:29 +00:00
d136e27a9c
Before attach card, check card is detected.
1999-12-30 16:50:43 +00:00
3e0dc7b316
VR41xx's PIU (Touch panel I/F unit) suport.
...
Currently it emulates relative pointing device like mouse, but it should
behave like an absolute pointing device. It needs more works in wsmouse side.
1999-12-28 03:15:16 +00:00
02464c54d0
Implement PCMCIA controller power up/reset.
1999-12-27 18:49:20 +00:00
0818609296
Update version no and executable binary for Compaq Aero 1530.
1999-12-27 01:56:18 +00:00
3c457707e6
add
...
Compaq Aero 1530
1999-12-26 17:27:53 +00:00
c81c09d71b
regen.
1999-12-26 17:21:59 +00:00
667e234adf
add platid:
...
Compaq Aero MODEL 1530
1999-12-26 17:21:03 +00:00
d034b79aa3
clean up.
1999-12-26 17:06:02 +00:00
124aa3ecd0
totaly rewritten.
1999-12-26 17:05:28 +00:00
fbae81d242
regen.
1999-12-26 05:51:25 +00:00
5723de16d3
add platid for MC/R530, INTERTOP CX310(IT310).
1999-12-26 05:50:59 +00:00
36380814c1
coding style clean up.
1999-12-23 17:24:30 +00:00
26125dde8a
Fix tx39clock_get bug.
1999-12-23 16:58:48 +00:00
0028029538
Add TX39IO_MFIOOUTPORT_OFF option (debugging use)
1999-12-23 16:58:07 +00:00
9481f398a2
Detect overrun interrupt. and add spl.
1999-12-23 16:57:14 +00:00
115925987c
Off LCD power when serial console.
1999-12-23 16:56:16 +00:00
11e6c54cfc
C99: Define a NAN macro in <math.h> which evaulates to a constant expression of
...
a single-precision quiet NaN; only to be defined on platforms that do support
this value.
1999-12-23 10:15:05 +00:00
98a2a24647
New button handler and power controller with configurable hooking mechanism.
1999-12-23 06:26:08 +00:00
508a4e8fd6
Implement TX3912/22 clock/timer module.
1999-12-22 15:35:33 +00:00
79adf0a66b
display CPU clock at boot time(Ex. NEC VR4121 rev0.0 131.072MHz).
1999-12-16 13:09:02 +00:00
9751951da4
add CPU pipeline clock calculation function for VR41xx.
...
display CPU clock at boot time(Ex. NEC VR4121 rev0.0 131.072MHz).
1999-12-16 12:10:02 +00:00
30c02c0abe
- support WSDISPLAYIO_GTYPE. (but currently return WSDISPLAY_TYPE_UNKNOWN.)
...
- support WSDISPLAYOP_GINFO. (but cmsize maybe not correct.. )
- not display kernel message when group 't' ioctl.
- support mmap()
1999-12-16 09:46:56 +00:00
b92082a557
- dump some pmu registers at attach.
1999-12-16 09:37:33 +00:00
0941c3a3c9
- cleanup a little..
1999-12-16 09:36:19 +00:00
63a8704a00
- initialize vrdsu_softc sc_iot member in vrdsuattach().
1999-12-14 04:21:10 +00:00
254fb071e7
- Vr4102 does not have PMUWAIT_REG_W register, so comment it.
...
- Vr4121 only have PMUDIV_REG_W register, so comment it.
1999-12-13 06:53:01 +00:00
93482f6705
- change some comments.
...
- vr4102 have not BCUCNT3_REG_W register, so comment it.
1999-12-13 03:11:36 +00:00
0ad989b87a
remove unreferrenced header file.
1999-12-12 18:40:33 +00:00
78a5012f77
add Telios keyboard (tc5165buf) information.
1999-12-12 17:11:20 +00:00
97c3960184
SHARP Telios keyboard driver TOSHIBA TC5165 (tentative)
1999-12-12 17:10:01 +00:00
b2098820d6
Telios keyboard support.
1999-12-12 17:08:37 +00:00
f76253722c
clean up
1999-12-12 17:07:13 +00:00
573725bd34
set stop timer interval.
1999-12-12 17:06:22 +00:00
7780f42e8c
update comment.
1999-12-12 17:05:38 +00:00
c8296edee4
code clean up.
1999-12-12 17:04:55 +00:00
e91bafa460
Replace unused keys with IGN instead of UNK for NEC MobilePro 750c,
...
to match usage of other systems.
Also, modify ALT keys to return AltL keysym so debugger key sequence
will work.
1999-12-11 08:23:29 +00:00
a9fc09cb1a
I've took 1 for i.
1999-12-11 03:29:26 +00:00
9fb0ec1daf
Recompile to support MobilePro 750 and Mobile Gear II for DoCoMo.
1999-12-11 02:58:22 +00:00
a29e89ddf6
regen.
1999-12-10 09:14:27 +00:00
5b17c4459e
change MG2 for Docomo,MCR-500A platid
1999-12-10 09:13:06 +00:00
d4524d28d7
MobilePro750c keyboard mapping table contributed by "Castor Fu" <castor@geocast.com>
1999-12-09 03:14:06 +00:00
20e8996454
add mobilepro750c_keytrans
1999-12-09 03:03:55 +00:00
30f0c17cb2
add entry for NEC MobilePro 750c
1999-12-09 02:51:30 +00:00
a565cabff0
Regen.
1999-12-09 02:48:43 +00:00
f169738a6b
add NEC MobilePro 750c a.k.a. MCR_500A
1999-12-09 02:47:24 +00:00
4765859db3
vrbcu related change.
1999-12-09 02:15:27 +00:00
30dbdb3a28
- cleanup a little.
...
- vrbcu_vrip_getcpuid()
- exported prototype move to header.
1999-12-09 02:14:00 +00:00
22f343c7ba
- tail \n
...
- add needs-flag for vrbcu & vrpmu.
1999-12-09 01:56:23 +00:00
bf823f92da
fix typo.
1999-12-08 16:22:10 +00:00
a46d11d667
don't define DEBUG in source code.
1999-12-08 15:57:12 +00:00
395dc11439
sync with skbd.
1999-12-08 15:54:11 +00:00
866a7053d6
MITUBISHI M38813 keyboard controller.
1999-12-08 15:51:07 +00:00
7584977dc8
Remove old keyboard driver for Compaq C.
...
Add driver
PHILIPS 74ALVC1624? buffer chip + simple keyboard driver.
1999-12-08 15:49:18 +00:00
d93cbc13dd
add MobileGearII for DoCoMo
1999-12-08 07:34:58 +00:00
2952df34ed
Regen.
1999-12-08 07:30:28 +00:00
7c4f8a7f07
add MobileGearII for DoCoMo
1999-12-08 07:29:24 +00:00
2335cc052c
add Compaq PRESARIO 213
1999-12-08 05:35:30 +00:00
d7ec450645
regen
1999-12-08 05:27:07 +00:00
b06bff8f39
add Compaq PRESARIO 213
1999-12-08 05:25:11 +00:00
1ff57633a7
- clear all intr status and show old status when attached.
1999-12-08 01:54:59 +00:00
0df4960b03
- PMUINT_ALL, PMUINT2_ALL.
...
- some registers.
1999-12-08 01:51:56 +00:00
2c24f58ba1
Vr41xx LED control register definitions.
1999-12-08 01:43:58 +00:00
dd4be4cdba
Fix iocorrect defines.
1999-12-07 17:53:04 +00:00
7dd8599060
supply power.
1999-12-07 17:37:21 +00:00
90c7b962a6
frame buffer device support.
1999-12-07 17:25:00 +00:00
1bf65c154a
Supply power before attaching socket.
1999-12-07 17:23:54 +00:00
e96dc9806b
changing power up sequence.
...
disable all power before probing plum2 devices.
1999-12-07 17:21:45 +00:00
af18379afb
TX3922, tx39_poll_intr uses stop timer interrupt as sampling interrupt.
1999-12-07 17:11:05 +00:00
704572cafe
clean up boot message.
1999-12-07 17:08:10 +00:00
c6dcc983e5
- fix typo.
...
- MINYEAR is 1999.
1999-12-07 05:02:01 +00:00
64ea52288d
cleanup a little..
1999-12-07 04:54:54 +00:00
0893832078
update for changed struct wsdisplay_accessops:show_screen signature.
...
no functional changes
1999-12-06 19:25:56 +00:00
0513268399
CL* discarding.
1999-12-04 21:13:19 +00:00
21574acbba
You can push power key to reboot when halt in vr_reboot.
1999-12-04 14:23:35 +00:00
b5c8739b96
Unify vr_reset and vr_powerdown.
1999-12-04 10:55:17 +00:00
19a5b325f3
Print input/output/interrupt settings.
1999-12-04 10:15:34 +00:00
adf3bfa79d
Fix file mode of pbsdboot.exe.
1999-12-04 02:43:48 +00:00
1917e12c8a
CS:CARD1/CARD2 8bit port support.
1999-12-03 18:15:41 +00:00
8ccf786b08
remove nonrequired include file line (fb.h)
1999-12-02 18:50:54 +00:00
9bd4956230
BUSSPACEDEBUG -> BUS_SPACE_DEBUG
1999-12-02 18:41:56 +00:00
85afb0e66b
bicons_getc: calls vrkiu_getc() when vrkiu is configurated only.
1999-11-30 18:42:02 +00:00
8b86f850f6
make platid_test compile again.
1999-11-30 15:11:00 +00:00
e3285cc801
commet out non-working code.
1999-11-29 17:23:04 +00:00
616ab352ae
tx39.c (tx_cons_init): fb_cnattach moved to tx3912video.c (tx3912video_attach):
1999-11-29 17:21:21 +00:00
ce5757bb6b
fix Fujitsu INTERTOP CX300 keymap.
1999-11-29 02:20:20 +00:00
82cd5e5ce2
add Fujitsu INTERTOP CX300.
1999-11-29 02:20:11 +00:00
f972baf686
Add definition for VR's special instructions.
1999-11-28 12:11:45 +00:00
943c083676
PowerOff code. (not yet completely)
...
'halt -p' availavle.
not yet all power off...
cannot exit poweroff mode. (reset required..)
1999-11-28 10:59:05 +00:00
62009df24f
Add new device vrdsu, with which we can hard reset the VR41xx CPU.
...
Why don't you try shutdown comand with option '-r ?
1999-11-28 04:29:37 +00:00
b006c3cae6
Fix frame buffer type for NEC MC-R520 and -R520A.
...
Add a menu item for IBM WorkPad z50.
1999-11-27 13:17:44 +00:00
6783a346b9
Fix date in copyright string.
1999-11-25 16:40:19 +00:00
6378e492c1
RAMDISK = GENERIC + md
1999-11-23 05:08:25 +00:00
1cf30597ea
forgot to change 'VRKIU_LAYOUT' to 'PCKBD_LAYOUT'.
1999-11-22 02:14:30 +00:00
e9a0023b37
bring in content of GENERIC.v6 into GENERIC.
...
remove GENERIC.v6 file (as it is part of GENERIC now).
"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.
if you have problem compiling with INET6 on archs I do not have access to,
please contact me.
XXX what to do with arch/arm32/SHARK{,.v6}?
1999-11-21 14:00:37 +00:00
312ac4e1e1
add scan code mapping for
...
IBM WorkPad z50
NEC MobilePro 770, 800
Sharp Tripad PV6000 / Vadem Clio
NEC MC-CS series
Fujitsu Intertop CX300
change keyboard layout according to model(default).
add options PCKBD_LAYOUT to override default.
1999-11-21 12:53:57 +00:00
a16b5d0ff6
Regen.
1999-11-21 12:49:07 +00:00
26fe8d79e2
regen.
1999-11-21 12:48:44 +00:00
85bb334fd0
add IBM WorkPad z50
1999-11-21 12:48:25 +00:00
69af3df31f
add MCCS comctrl (GPIO 14)
...
add IBM WorkPad z50
1999-11-21 12:47:33 +00:00
40fbdc840c
add wscons to compile
1999-11-21 12:46:51 +00:00
3abbbd219e
Add entries for Mobile Pro 770(MC-R520A) and Mobile Pro 800(MC-R700A).
1999-11-21 07:58:49 +00:00
4c747fe97d
TX3912/3922 support
1999-11-21 07:04:31 +00:00
fe6ca23b78
add new function vr_fb_init, vr_mem_init.
1999-11-21 07:01:54 +00:00
5bd99e89d8
add fb_init, mem_init member to struct platform.
1999-11-21 06:59:41 +00:00
0816e8d336
when frame buffer address is not specified, don't try to access.
1999-11-21 06:53:21 +00:00
9a758aab34
PLUM2(TC6358TB) TX3922 companion chip
1999-11-21 06:50:26 +00:00
a8b695c150
ITE IT8368E PCMCIA controller
1999-11-21 06:48:58 +00:00
480704756f
Compaq C-series keyboard driver
1999-11-21 06:48:02 +00:00
takemura