47dabcfc3f
Support files to use wskbd/wsmouse on VAXen with DZ-like chips.
...
From Matthew Fredette (fredette@MIT.EDU ).
2000-12-02 17:03:55 +00:00
23eb2da75d
Accept the "Utför" key as a giant ctrl-alt key. On LK201 "Ctrl" and
...
"Compose" cannot be pressed at the same time.
2000-12-02 16:57:41 +00:00
2b69243845
Add AHC_NO_TAGS option to switch off tagged queueing. Done because
...
tagged queueing has a severe performance impact (60%) on write
throughput with UBC. Needs investigation.
2000-12-02 14:53:01 +00:00
a51ea43fd6
Make this compile again (on i386).
2000-12-01 04:37:54 +00:00
d736ce5086
We don't need <sys/proc.h>, <sys/user.h> and <machine/cpu.h>.
2000-11-30 23:21:39 +00:00
55fa60c3e5
De-__P().
2000-11-30 23:12:43 +00:00
58b6f2ef7d
KNF patrol && De-__P().
2000-11-30 23:06:44 +00:00
03903e1da8
KNF patrol.
2000-11-30 23:01:03 +00:00
ec15125b5b
Don't restrict I/O space to 16-bits on the Promise Ultra/33 boards.
...
Empirical evidence suggests that the board works just fine with
an I/O address >= 0x10000.
2000-11-30 18:11:40 +00:00
786dc5161c
Clarify RX status header length and some cosmetics.
2000-11-30 15:51:57 +00:00
fd4d074b27
After rev 1.16 rtk driver uses the CRC from the chip,
...
so no need to adjust Rx address for it. Fixes kern/11301.
2000-11-30 15:33:04 +00:00
64222ad03a
Fix some printf formats, and remove SPARC-specific debugging stuff.
2000-11-30 14:41:46 +00:00
7006bcd449
Fix two cases of reversed arguments to printf();
2000-11-30 09:58:03 +00:00
99a39489d8
Pass the right size of object (in this case, a trailer) to fwohci_buf_pktget.
...
Since the fp_trail is a pointer to trailer, we have to pass sizeof(*fp_trail)
instead of sizeof(fp_trail).
2000-11-30 06:59:08 +00:00
a89beb967d
Make this file compiles on alpha even if FW_DEBUG is defined.
2000-11-30 06:42:26 +00:00
4792308b32
Pass the right max segment size to bus_dmamap_create.
2000-11-30 06:36:43 +00:00
9e7aa98aa6
Add TAG QUEUE support to the ncr53c9x driver.
2000-11-30 00:19:25 +00:00
14f5ab8928
ANSI'ify.
2000-11-29 18:22:17 +00:00
972c941cf6
Fix typo in comment reported by Tetsuya Isaki in kern/11587.
2000-11-29 12:49:56 +00:00
435b4c7b35
Fix c896 support. If the first mem bar is 64bit, then the second one will
...
be too. And offset for the 2nd being after the 1st by a 64-bit bar, not
32-bit.
2000-11-29 02:00:38 +00:00
454f740bd4
Use AC97_REG_* constants rather than defining them ourselves.
2000-11-28 16:57:16 +00:00
997701c6c1
Define additional AC'97 registers.
2000-11-28 16:54:17 +00:00
92f11ef3d3
BUG FIX: change enable sequence for 16-bit pcmcia cards. This change
...
provides better (not perfect) reset sequence. The most significant
change is asserting output enable reg before power up. Stop routing
interrupt during reset.
2000-11-28 09:11:36 +00:00
443bd6369f
Device driver for the built-in audio on Intel ICH, ICH0, ICH2,
...
and i440MX chipsets. Based on a driver by Michael Shalayeff,
modified somewhat by me to use bus_dma properly, and fix some
audio encoding emulation bugs.
Thanks to Manuel Bouyer for testing and feedback.
2000-11-28 05:12:29 +00:00
1aa6c9fb10
Add prep support. change all __foo__ to foo. We don't __foo__ in the kernel
2000-11-27 21:51:02 +00:00
02aaf95f67
BUG FIX: pccbb turns off PC Cards' power on the bus in shutdown hook.
...
Some machines cannot reboot without this fix.
2000-11-27 09:04:32 +00:00
aeda8d3b77
Initial integration of the Unified Buffer Cache project.
2000-11-27 08:39:39 +00:00
25491e6a22
Power management (well, suspend/resume) is now implemented. Remove
...
it from the TODO list.
2000-11-27 02:37:14 +00:00
248928c7cf
Add a powerhook to reload AC97 registers after a resume.
...
Sound now works after suspend/resume on my Sony PCG-Z505S
2000-11-27 01:56:53 +00:00
7ec52ba411
Improve a debug message.
2000-11-26 21:05:02 +00:00
88bf6139e5
Regen.
2000-11-26 21:04:43 +00:00
63dfc5b570
Add an Intel camera (rfom OpenBSD).
2000-11-26 21:04:20 +00:00
04a83acaf7
lsu -> ld
2000-11-26 19:24:24 +00:00
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
ee170a5528
Avoid a possible stall.
2000-11-26 16:16:04 +00:00
3c9d9276dc
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
...
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2000-11-26 11:08:57 +00:00
d76cf8b502
Add multiple include detection - all userland installed headers are now
...
safe.
2000-11-26 06:03:24 +00:00
12269bd46c
Don't try to use ultra-dma on sis chips with revision 0xd0. It loses
...
immediately with a lost interrupt on udma mode 2, downgrades to mode 1
at which point it silently corrupts data on high disk activity. This
happens on two out of 3 machines I own that exhibit high disk activity.
2000-11-26 04:59:18 +00:00
2e93099aff
Replace sfb_copycols() which can run better job in some degree.
...
It still fails on certain conditions, thus is left commented out.
copycols() is done by a generic routine which works correctly.
2000-11-25 11:43:42 +00:00
1e1862bc57
Add another font from 4.4BSD-Lite2/luna68k.
2000-11-24 15:47:15 +00:00
b974ee7790
Add TC option card descriptions, which are commented out before NetBSD/pmax
...
yields local implementations to them.
2000-11-24 05:02:26 +00:00
fa19fe52db
adjust the spinlock macros in the non-MULTIPROCESSOR, non-LOCKDEBUG case
...
so that gcc will think that static spinlock are used.
this allows us to remove the ugly conditionalization of
static spinlock declarations.
2000-11-24 03:59:07 +00:00
f6b62f776c
avoid division and remainder operations for devices where
...
the sector size is DEV_BSIZE (ie. practically everything).
2000-11-24 00:17:35 +00:00
0661e6718b
- fix an error in uninitialized variable reference.
...
- add a missing function argument declaration.
- minor comment adjustments.
2000-11-22 06:59:08 +00:00
efadefb53f
In uhci_intr(), only warn about power state confusion if the
...
interrupt was actually for us.
2000-11-22 05:50:59 +00:00
a622a1b6d2
Remove obsolete comment.
2000-11-22 00:32:24 +00:00
690b28f91e
Add a couple of fonts used on Sony NEWS.
...
Generated from (recently removed) sys/arch/newsmips/dev/fnt{,24}.c.
2000-11-21 11:44:45 +00:00
ce10334de9
Fix errors in color lookup table initialization. Glyph is rendered
...
in visible color now.
2000-11-21 07:42:02 +00:00
290a66c213
Reduce probe noise.
2000-11-21 05:23:37 +00:00
1a5d87c9fa
Regen.
2000-11-21 00:25:43 +00:00
219abdb871
Typo.
2000-11-21 00:25:35 +00:00
6faa85c6d3
Note 3Com card support.
2000-11-21 00:25:20 +00:00
6f8985cf15
Regen.
2000-11-21 00:25:04 +00:00
7736bcc821
Add Prolific printer adapter.
2000-11-21 00:24:12 +00:00
e38c89a886
s/iRDA/IrDA/
2000-11-21 00:20:30 +00:00
1964a728da
add moxa
2000-11-20 19:27:16 +00:00
c27af44fc0
Add an attachment for MOXA 168P isa multiport card. This code was
...
written by Christoph Badura.
This was reported to work by user of this code. It's not tested
by me, but it's probably more useful in tree anyway.
2000-11-20 19:24:39 +00:00
2819c7b688
Use DMA from mbuf instead of copy in transmit.
...
Still use memcpy in receiving because we must use buffer fill mode
and many packets may share single receive buffer.
XXX: Workaround(?) for CXD3222: it fails to DMA for selfid packet according
to code placement. I'm not sure about the reason (cache? timing? bug?).
Fixed the bug: transmitter sometimes stop and OACTIVE bit of if_fw
never be cleared.
Fixed the bug: freeing free buffer.
Enable ieee1394_drain and ieee1394_watchdog for loss of fragment.
2000-11-20 12:12:18 +00:00
c62d17a551
rationalize the use of b_flags for geteblk() buffers.
...
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
2000-11-20 08:24:08 +00:00
4e1e677996
regen.
...
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:23:13 +00:00
e51b1f604e
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:22:13 +00:00
d81861796a
Add support for Intel ICH2
2000-11-19 15:32:24 +00:00
acc196c4a9
Initialize ring buffer pointers when the ring buffer is allocated.
...
(comsoft() can be invoked before comopen() on serial consoles; a character
received before the console is opened "for real" can result in a fatal trap
unless the ring buffer pointers are initialized early)
2000-11-18 15:46:23 +00:00
0aea00f57c
Regen.
2000-11-18 05:29:27 +00:00
cec0022eeb
Add some 3D Labs products, from XFree86, via groo@netbsd.org
2000-11-18 05:29:00 +00:00
1e533cd38c
Pull up FreeBSD changes:
...
1.39:
Have if_ti stop "hiding" the softc pointer in the buffer region. Rather,
use the available void * passed to the free routine and pass the softc
pointer through there.
1.33:
Add support for the Netgear GA620T copper gigabit card.
1.32:
Tweak probe message so that 1000baseSX and 1000baseT cards are
explicitly identified.
1.31:
Update the Tigon driver to support 1000baseTX gigE over copper AceNIC
cards. This basically involves switching to the 12.4.13 firmware, plus
a couple of minor tweaks to the driver.
NetBSD changes:
get rid of ti_inuse, the mbuf ref counting code should call ti_free() when
needed.
Use hardware 802.1q support.
2000-11-17 19:33:25 +00:00
54e36dbaa6
Update to firmware 12.4.13+wpaul, from FreeBSD
2000-11-17 19:23:35 +00:00
42681a6a9f
Supports ETHERCAP_VLAN_MTU. Tested on sbus hme on Ultra/1.
...
Thanks to Andrei Petrov for the hint !
2000-11-17 19:08:00 +00:00
4046a1bd78
if AC97_CODEC_DOES_VRA is not supported, only print warning than
...
hw Variable Rate Audio is not supported and continue attaching the driver.
This is I believe more correct than what was done in rev 1.5
2000-11-15 21:06:33 +00:00
ef36370776
Regen.
2000-11-15 14:36:50 +00:00
d57ee8b358
Add Sony memory stick.
2000-11-15 14:36:09 +00:00
503701f0d3
OF_nextprop: make OUT argument type `void *'
2000-11-15 14:27:26 +00:00
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
c0122f4013
Add fwlynx PCI attachment
2000-11-14 23:40:44 +00:00
ffd7494144
Add openfirm
2000-11-14 23:37:58 +00:00
617742b256
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-14 23:37:20 +00:00
1936d0565a
some cleanup. Add back OFIOCGETOPTNODE.
2000-11-14 21:10:05 +00:00
a790bc7690
Add OFIOCGETOPTNODE (now that I know how to implement it).
2000-11-14 21:07:26 +00:00
99fac6ed3e
need uvm/uvm_extern.h for PAGE_SIZE
2000-11-14 19:44:34 +00:00
cfe0892ed3
NBPG -> PAGE_SIZE
2000-11-14 18:42:55 +00:00
60f33f91c2
Pull in <uvm/uvm_extern.h>
2000-11-14 18:35:10 +00:00
275539f03c
NBPG -> PAGE_SIZE
2000-11-14 18:21:00 +00:00
34a57dc139
Regen.
2000-11-14 16:20:55 +00:00
41e8f20175
Add Alteon and netgear 1000baseT variants of the gigabit ethernet adapter.
...
From FreeBSD
2000-11-14 16:20:20 +00:00
1ae6bcbbf0
Acerscan 320U doesn't do strings right. From FreeBSD.
2000-11-14 15:33:04 +00:00
ab324086df
Set the open flag when opening the scanner.
2000-11-14 13:57:16 +00:00
f1c77e81db
Add support for link fragmentation and reassemble for IEEE-1394.
...
XXX: drain is still not yet implemented, thus memory leak will occur
in case of any of fragment lost.
2000-11-14 11:14:55 +00:00
fbf62501af
Mark the "TOSHIBA, XM-4101TASUNSLCD" CD-R for a-sync operation only.
2000-11-14 08:52:35 +00:00
7d085e8e51
Add openfirmio which is an ioctl interface to OpenFirmware.
2000-11-14 06:45:54 +00:00
3b275bc230
Add OF_nextprop and OF_setprop prototypes.
2000-11-14 06:44:12 +00:00
1365092255
de __P'd.
2000-11-14 06:42:27 +00:00
4c54ce2034
Define ncr53c9x_ioctl() and use it to start sync negotiation.
2000-11-13 15:24:22 +00:00
089961e7c5
- use jumbo rx if mtu is too big to fit in one mbuf, not when larger than
...
ETHERMTU.
- add support for ETHERCAP_VLAN_MTU.
2000-11-12 18:32:43 +00:00
ad9bda9339
Change `nvram size' data type to `bus_size_t'.
2000-11-11 11:59:42 +00:00
035ceca5b2
Add note about time-of-day and interval timer programming on this chip
...
are combined into the same (write-only!) control register.
2000-11-11 11:18:07 +00:00
526def8fd1
Add a function to retrieve the size of the on-chip NVRAM area.
2000-11-11 11:03:31 +00:00
6836c0bd28
Update frlengths after a isoc transfer.
...
Suggested by Yuri <yuri@tsoft.com>
2000-11-10 14:11:49 +00:00
1bfab105b0
Don't try to set CM_OVER_DATA feature if features cannot be set.
...
From Ryutaroh MATSUMOTO <ryutaroh@ss.titech.ac.jp> in PR # 11428.
2000-11-10 14:08:32 +00:00
0510b1739c
Update documentation link. From OpenBSD.
2000-11-10 13:53:23 +00:00
9a10107274
Some OpenBSD defines. From aaron@monkey.org
2000-11-10 13:52:28 +00:00
da071ce468
Remove lonely splx in fw_detach.
2000-11-10 03:45:09 +00:00
a7398324e3
Regen for ELSA WaveLan IDs
2000-11-10 01:03:29 +00:00
e00d559554
Add ELSA WaveLAN card & a noname clone(?)
2000-11-10 01:02:32 +00:00
c8c52e320a
Match controllers hiding behind a Symbios 53c1510; thanks to Jonathan Lemon
...
<jlemon@flugsvamp.com> for providing clarification.
2000-11-09 18:19:40 +00:00
611c77c7df
unused variable
2000-11-09 17:20:24 +00:00
01dc7ef4f3
TODO
2000-11-09 15:04:55 +00:00
0129c52c7d
- A few minor changes (typos and the like).
...
- Use SPLs in iop_msg_send() and not the interrupt mask - it accesses
shared resources lower down.
2000-11-09 12:51:36 +00:00
9a41c41bed
Install only headers that are useful to userspace (ioctl interface is not
...
finished, but will be here soon).
2000-11-09 12:34:05 +00:00
71b0c155a0
Support for MI console magic framework.
2000-11-08 23:41:42 +00:00
faa5920bd2
Use the MI console magic sequence framework.
2000-11-08 23:13:03 +00:00
45b672fb47
Add iop, iopsp.
2000-11-08 19:56:20 +00:00
5854b30016
Add glue for iop.
2000-11-08 19:46:27 +00:00
3785a081f1
Recurse into i2o/.
2000-11-08 19:45:49 +00:00
d49fd13524
Add support for I2O adapters and SCSI/FC-AL/BSA class devices. This needs
...
more testing with different configurations, and work in a number of areas
(which I'm not able to do for a little while), but is at least functional
and stable on i386 with DPT adapters.
2000-11-08 19:45:30 +00:00
918971bc20
Initial import of some of the definitions for the Serial Bus Protocol V2.
...
Which is used for SCSI over IEEE1394.
2000-11-08 19:27:08 +00:00
891c4efd74
- Pull in some updates from FreeBSD - mainly clarifications. Thanks to
...
Mike Smith <msmith@freebsd.org> for pointing these out.
- Ensure that we get AENs: reserve one CCB/command block for parameter
retrieval, and chain AEN retrievals that are the result of an interrupt.
2000-11-08 19:23:50 +00:00
142ab5b1ec
Move lsu stuff to more logical locations, and push queueing into the lsu
...
driver.
2000-11-08 19:20:33 +00:00
d0c3ebd9d8
Make the test for dmareg >= 0x10000 quirked on IDE_16BIT_IOSPACE
2000-11-08 18:22:27 +00:00
88cbfbe36d
Move guts of pciide_print_modes() to wdc_print_modes() so that non-pciide
...
wdc drivers (like macppc's obio IDE interface) can use it. Also add
support to both wd attach line and to wdc_print_modes() to print
Ultra/{33,66,100} for respective UDMA modes (From Manuel Bouyer).
2000-11-08 17:57:36 +00:00
d764c4d540
One more fix to multicast hash computation. Submitter confirms that
...
with this fix, multicast does indeed work properly on the EPIC.
From Zdenek Salvet <salvet@ics.muni.cz>.
2000-11-08 15:20:29 +00:00
5b19fc8512
Add powerhook and shutdownhook to support Notebook.
...
Use PAGE_SIZE instead of OHCI_PAGE_SIZE for each DMA mem.
OHCI_PAGE_SIZE(2kB) will be round up PAGE_SIZE, anyway.
XXX: need more sophisticated way to manage buffer.
Clear IntEvent first not to lose SelfIDCompleted in multiple bus reset.
Be careful not to clear BusReset int event in SelfID duration to follow
the OHCI spec.
Initiate BusReset if selfid is not completed within 3sec after busreset.
2000-11-08 06:00:18 +00:00
d522d7acc9
Add fwlynx & fwnode.
2000-11-07 18:45:46 +00:00
b666be4488
Add more names:
...
MI: hifn, intersil7170, neo, siop_common, sysmon_envsys, sysmon_wdog
i386: mca
newsmips: dmac, spifi, xafb
2000-11-07 15:33:53 +00:00
232e2c5ef9
Regen.
2000-11-07 13:53:59 +00:00
0dc9fd53b9
Just print 'Intel' for their other OUI.
2000-11-07 13:53:42 +00:00
5a356af882
Regen.
2000-11-06 22:32:49 +00:00
75367f830a
Add some OUIs and models. From OpenBSD.
2000-11-06 22:32:26 +00:00
5d7a16ff8c
make it compilable with FW_DEBUG
2000-11-05 23:04:00 +00:00
b6b3ee8657
remove what looks to be a bit of leftover debug code.
2000-11-05 23:00:10 +00:00
1c76b8d14d
fix types in debug code.
2000-11-05 22:59:27 +00:00
f0bd09f42d
Merge in my some of my stuff.
2000-11-05 22:35:56 +00:00
43ff857e29
Don't allow use of mapreg is they are at or above 0x10000 in I/O space. (in
...
other words, if the address uses bits in the top 16 bits, don't use it).
2000-11-05 21:14:59 +00:00
d458239a94
When doing the cacheflush for MIPS1, adjust the length to account for
...
an unaligned buffer. The last word of the buffer was not getting flushed
if the buffer was unaligned and fit in a single DMA segment. Now dump(8)
works on both MIPS1 and MIPS3 DECstations.
2000-11-05 21:02:13 +00:00
0f1770e08d
make compilable without FW_DEBUG
2000-11-05 19:43:32 +00:00
e83458422f
First Prototype implementation of network interface part for IEEE1394 (if_fw).
...
Current status:
Only OHCI chip is supported (fwohci).
ping (IPv4) works with Sony's implementation (SmartConnect) on Win98.
sometimes works but not stable.
Not implemented yet:
IRM (Isochronous Resource Manager) functionality.
Link layer fragmentation.
Topology map.
More to do:
clean ups
MCAP
charactor device part
dhcp
There is no entry in GENERIC config file yet.
Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 17:17:12 +00:00
1363813e0d
Two things off the TODO list.
2000-11-05 16:44:08 +00:00
cde4f7415c
Add mmap support (i386-specific for the moment).
2000-11-05 16:24:45 +00:00
5a8a59d459
Weed out the Dell and HP versions which are known to work in
...
WSS emulation mode (i.e. won't work in AC'97 mode).
2000-11-05 16:13:17 +00:00
70b3814a53
Add NeoMagic 256 audio.
2000-11-05 06:46:03 +00:00
f945fc008d
Driver for NeoMagic 256 audio. Based on the OpenBSD driver, which is
...
in turn based on the FreeBSD driver, ported to NetBSD and somewhat
modified by me. Thanks to Matt Thomas for testing.
2000-11-05 06:43:45 +00:00
aac73109ae
Feh, fix st00p1d braino in last.
2000-11-05 05:41:25 +00:00
fce3c3a6a8
pcweasel carries the sysmon_wdog attribute.
2000-11-05 04:07:30 +00:00
8e0eb1dc12
viaenv carries the sysmon_envsys attribute.
2000-11-05 04:06:53 +00:00
e67f5e66bc
Split the envsys and watchdog parts of sysmon into their own
...
files.
2000-11-05 04:06:13 +00:00
3b5fce6c46
Invert the sense of i82586_init()'s return value so that
...
it matches what ether_ioctl() expects.
2000-11-04 19:48:38 +00:00
95b9ab0ebc
Add a device driver for the Middle Digital, Inc. PC-Weasel serial
...
console board. This glues into the `pcdisplay' driver and provides
support for the watchdog timer function on the PC-Weasel.
2000-11-04 18:47:20 +00:00
7575e3d5e9
Update comment regarding watchdog timer toggle.
2000-11-04 18:44:28 +00:00
c48d521bdb
Add a watchog timer framework to the system monitor.
2000-11-04 18:37:19 +00:00
232ac6b3d1
Print the vendor and chip id in the DPRINTF with 0x%x and not just %d.
2000-11-04 18:28:19 +00:00
f3c38af11b
Regen.
2000-11-04 16:43:14 +00:00
601bcf9813
Add a couple NeoMagic products. From OpenBSD.
2000-11-04 16:41:57 +00:00
f3030960da
Add quirks for a Fuji camera.
2000-11-04 15:54:36 +00:00
05d5f37522
Shadow the AC'97 codec registers. This adds two capabilities:
...
* support devices that crash when reading the codec registers; a flags
interface is added to the host interface and one flag is defined
(AC97_HOST_DONT_READ).
* new API (restore_ports) for restoring the user's settings. This
can be useful after an APM resume after a suspend to disk.
From OpenBSD.
2000-11-04 08:07:14 +00:00
0bb6525f5b
Add some more codec IDs. From OpenBSD.
2000-11-04 05:45:57 +00:00
96d994ecae
regen.
2000-11-03 16:31:51 +00:00
10885fbd47
Oops
2000-11-03 16:31:01 +00:00
62d4f894dc
Regen.
2000-11-03 15:57:33 +00:00
3789452cb3
Pequr Technology is now called ServerWorks.
2000-11-03 15:54:02 +00:00
8ba559d056
st_touch_tape(): Pass XS_CTL_SILENT to st_mode_select().
2000-11-03 12:08:41 +00:00
4c7351ec7d
* st_touch_tape(): start probing at the block size from the sense data if
...
we have it.
* st_unmount(): reset density to the device default. This prevents using
stale density values after changing to a medium with different density.
Section 9.3.3 of the SCSI specs states that a device shall return the
density value specified in the last succesfull MODE SELECT after an
unload operation, in case it is not able to automatically determine
the density of the new medium.
2000-11-03 10:46:18 +00:00
e3aaa6c1ab
* Per st(4), retrieving status and setting modes on the control device
...
should succeed even if no media is loaded.
* In stopen(), check the return value of st_mount_tape().
2000-11-03 10:22:02 +00:00
d3ca42abf0
Add support for Socket Comm. PC Card Ethernet, and tidy up naming.
2000-11-03 09:07:24 +00:00
39355e9743
Make this compilie with LANCE_REVC_BUG.
2000-11-03 06:21:32 +00:00
d952450835
Wrap function declaration with "#ifndef sun3/#endif"
...
because sun3 does not have bus_space(9) support and
it have not switched to MI intersil7170 driver.
XXX We should split this into intersil7170{reg,var}.h ?
2000-11-03 05:23:07 +00:00
9702e75aa1
Sync with FreeBSD: Add a scanner. Fix a pasto.
2000-11-03 04:00:15 +00:00
930c4cf062
First attempt at multicast stuff. I suspect it doesn't work.
...
Use ether_ioctl -- saves 300 bytes of text.
2000-11-03 00:25:36 +00:00
42e564ed45
Remove unnecessary includes.
...
Add a compiled-in RCSID.
2000-11-02 21:56:46 +00:00
13234acd0f
Convert to using ether_ioctl().
...
G/C huge swathes of unused code and outdated comments.
2000-11-02 21:42:41 +00:00
f5f7066fc8
When a read DMA transfer is interrupted by a disconnect on the IOASIC SCSI
...
and the buffer is not 8-byte aligned, it leaves a partial transfer in the
SDRx registers. This could cause data corruption in dump(8) because the
read-ahead buffers are allocated on a non-aligned address. When the read
DMA transfer is interrupted and the current DMA position is not aligned,
call the dma_end() routine to flush the SDRx register contents to the
buffer.
2000-11-02 21:00:04 +00:00
b2429742a5
Print out product info on attach.
2000-11-02 18:55:46 +00:00
f71476a62f
Introduce ST_Q_ERASE_NOIMM, a quirk indicating that the device rejects
...
an ERASE command with the `Immed' bit on.
Use it on the VIPER 21247 & 21531.
2000-11-02 13:34:59 +00:00
e4958f1fe6
Prevent printing sense information twice.
2000-11-02 13:12:58 +00:00
5bf3b4ba22
regen
2000-11-02 07:16:16 +00:00
24429db457
add support:
...
MELCO LPC2-TX
Telecom Device TCD-HPC100
MACNICA ME1-JEIDA
2000-11-02 07:15:43 +00:00
41cfcbebb0
Fix two bugs.
...
- Doesn't fail ne_pcmcia_attach() if ne_pcmcia_ax88190_set_iobase() failed.
- Check whether LIOBASE register is writable or not (dirty hack!).
Fix PR. 11285
2000-11-02 07:04:46 +00:00
9c058471c3
Remove useless check for SDEV_MEDIA_LOADED from st_read_block_limits().
...
This command should work whether or not media is present in the device.
2000-11-02 00:56:59 +00:00
3867a66a9a
* In st_touch_tape(), don't bail out if the MODE SELECT fails since we are,
...
after all, probing the device for acceptable parameters.
* In st_loadquirks(), copy mode-specific quirks from the quirk table
to `st_softc'; otherwise all such quirks save ST_Q_FORCE_BLKSIZE are ignored.
2000-11-02 00:52:15 +00:00
507aaec04c
Adapt to the new line discipline scheme.
2000-11-02 00:01:44 +00:00
9350b8913d
Adapt to new line discipline scheme.
2000-11-01 23:57:14 +00:00
2a860a3de9
Adapt to the new line discipline scheme.
2000-11-01 23:54:57 +00:00
55fd5a2fb0
Pass along the bus frequency too, for devices that need it.
2000-11-01 06:18:45 +00:00
34ed153955
Fix warning in a debug printf.
2000-11-01 06:17:32 +00:00
f5ba0a3942
fb_is_console(): we must match on the `fb' propery in a V0 PROMs root node
...
only after establishing that the PROM output device is a frame buffer device.
2000-10-31 21:54:35 +00:00
97e5badeae
Line up columns in #define list.
2000-10-31 15:16:26 +00:00
f9a51c7b15
Clean up a #define that doesn't belong. Oops. That's what I get for
...
working this late.
2000-10-31 08:06:14 +00:00
37486bb837
Get the bpp driver to work properly.
2000-10-31 06:32:06 +00:00
a7fcd8b686
Fix hanging token ring when data size is multiple of 514, using
...
patch in PR/11316 by YAMAMOTO Takashi.
This fixes random hangs I experienced, and probably also
remedies PR/11300 and PR/9321.
2000-10-31 01:22:08 +00:00
55b8e84db5
Delete more files before import.
2000-10-28 14:51:08 +00:00
d91eb6a0c3
Replace remaining vm_offset_t's in NetBSD code by vaddr_t; remove now
...
unnecessary casts added by thorpej in 1.11 of bktr_core.c. Strike one
from the TODO list.
2000-10-28 14:50:27 +00:00
134608261c
Merge 2.17 changes to trunk.
2000-10-28 14:31:57 +00:00
9732164f76
Import release 2.17 of the bktr driver.
...
Changes: Integration of some NetBSD changes. (FreeBSD version now is also
usable as a KLD (~= LKM).)
2000-10-28 14:17:40 +00:00
d214b09b47
Increase initial Tx drain threshold to 512 bytes.
...
My macppc complains about transmit FIFO underrun every time.
2000-10-28 08:36:57 +00:00
4295299769
Regen.
2000-10-27 22:43:44 +00:00
86342bb610
Add a bunch of Intel PCI chipsets. From OpenBSD.
2000-10-27 22:43:28 +00:00
1b15310aaa
Regen.
2000-10-27 17:37:02 +00:00
24cba36ced
Add a bunch of Pequr (ServerWorks) products. From OpenBSD.
2000-10-27 17:36:44 +00:00
8a54846748
Fix errors in initializing the software copy of 256 entry colormap
...
stored in device softc. rasops_cmap[] array is orginazed in 256
iteration of 3 byte long RBG triplet, which does not match with
struct wsdisplay_cmap design.
2000-10-27 07:24:04 +00:00
528e314143
Work around a fatal firmware bug on some boards. From msmith@freebsd.org.
2000-10-26 14:43:50 +00:00
a4df364077
METHOD CHANGE: Use CIS_FUNCE data which is decoded by pcmcia_cis.c,
...
instead of decode cis tuple by itself. This change leads to suppress
one power-cycling.
2000-10-25 09:32:11 +00:00
b44679b7ec
Bugfix: reset 16-bit pcmcia in chip initialisation sequence.
2000-10-25 09:15:58 +00:00
a675063a0d
Add a hack to try and figure out if the TI UTUSB41 hub is bus powered
...
despite claiming to be self powered (it's important to know so that the
power budget can be met).
2000-10-24 15:01:26 +00:00
372ae0a636
The all time favourite hub, TI UTUSB41, doesn't report power right. :(
2000-10-24 14:57:35 +00:00
5cc8d65338
Adda quirk for hubs that do not report bus powered status in a normal way.
2000-10-24 14:56:09 +00:00
94e36acb29
Tell usbd_set_config_no() to be verbose. It's nice to know whyit fails.
2000-10-24 14:53:59 +00:00
71fc3f6ee2
Regen.
2000-10-24 14:51:51 +00:00
963138bceb
Add Apple's cool new mouse.
2000-10-24 14:51:24 +00:00
7817cc2ba7
another Ricochet quirk, this time a well-known one. No device strings are provided from it.
2000-10-24 03:59:16 +00:00
fc92601259
Fixes related to QUEUE FULL status:
...
- move status handling in siop_scsicmd_end(), it's better than in siop_intr()
- define 2 internal SIOP status, for "no status reported by device" and
reset condition
- add a list of "urgent" command, to be executed before the list of command
queued the normal way; this is used for command which got aborted
by a QUEUE FULL and have to be requeued in order.
- Don't accept to send a Q_TAG message not immediatly folowing a IDENTIFY
2000-10-23 23:18:10 +00:00
cce4838c1f
Add ram size to struct properties, and pass it to the bus independant part.
2000-10-23 14:57:23 +00:00
7777f61cbe
Rearrange for script changes (scheduler core in main script, command part
...
of the scheduler in command table).
Add tagged command queuing support.
2000-10-23 14:56:16 +00:00
5113af09e3
Regen
2000-10-23 14:54:50 +00:00
7ae5c097e5
Rearrange things a bit to have less jumps
...
Install the core of the scheduler in main script (so it's in RAM when there is
one), and avoid jump in the common case. The command part of the scheduler now
lives in host memory, with tables.
Add template for a tag switch.
2000-10-23 14:53:53 +00:00
3b7321e1c0
Allow conditionnal branch like "JUMP foo, IF FALSE"
...
The branch will never be taken as is, but the driver can patch the script.
2000-10-23 14:51:51 +00:00
96562d2d4f
Add missing splx() call.
2000-10-23 11:27:52 +00:00
644aa13a51
Fixed the value of TULIPF_DBO; which was accidentaly shared with the same
...
value of TULIPF_BLE. Pointed out by Enami-san.
2000-10-23 04:05:21 +00:00
365f7337ea
make ucom into a random source, type TTY
2000-10-22 19:01:44 +00:00
eb27dda01d
Add a new quirk: ASSUME_CM_OVER_DATA.
...
Set this on the Metricom Ricochet GS USB modem.
This particular modem breaks if the USB command to enable the feature
CM_OVER_DATA. Since it appears to wake up in that mode already,
just pretend it is already on, and don't try to set it.
Since this commit is happening over my Ricochet modem, I assume it works
now.
2000-10-22 08:20:09 +00:00
0a481d850d
fix SBus bursting *correctly* this time
2000-10-22 03:04:50 +00:00
2ebf1a0cd0
Ops, sync the script DMA map when the script RAM *don't* exists.
2000-10-21 13:56:17 +00:00
833dea96d1
- tsleep()/wakeup_one() will hurt when under load, so use a queue instead.
...
- Don't copy to or from the aligned buffer unless there's a need to.
2000-10-20 15:14:25 +00:00
5e0c8a6d51
- ca -> lsu
...
- Note twe.
2000-10-20 11:47:43 +00:00
e999ecae48
Support ETHERCAP_VLAN_MTU. Tested on a sparc 2 with:
...
le0 at sbus0 slot 0 offset 0xc00000 level 5: address 00:00:3b:86:19:92
le0: 8 receive buffers, 2 transmit buffers
2000-10-20 09:40:26 +00:00
0c6aa8d3ed
ensure DMA mappings are not mapped streamable. fixes ethernet problems on
...
ultrasparc sbus class machines. from eeh.
2000-10-20 06:08:02 +00:00
3af567c485
rework to use bus_dmamem_map() then bus_dmamem_load(), rather than
...
bus_dmamem_load_raw() then bus_dmamem_map().
tested on SS2 and SS5 and sbus cards.
2000-10-20 05:57:50 +00:00
25f61791dd
Only install wsconsio.h, wsdisplay_usl_io.h, wsksymdef.h and wsksymvar.h
...
into /usr/include/dev/wscons.
2000-10-20 05:32:47 +00:00
d349cdf1ef
Move disk_busy() and disk_unbusy() to more sane locations. Values
...
reported by 'systat iostat' and friends are now much more correct for
RAIDframe devices. Thanks to Andrew Doran for poking me about this,
and for suggestions on and review of the changes.
2000-10-20 02:24:45 +00:00
16a062538b
Nuke unused includes, sort decls.
2000-10-19 15:31:20 +00:00
e05c79ba66
Regen.
2000-10-19 15:29:14 +00:00
5110b7e58d
Add Compaq IEAS.
2000-10-19 15:28:50 +00:00
67fe5fbbb4
Update for lsu; untested.
2000-10-19 14:28:46 +00:00
e9b69699e0
Hook in twe.
2000-10-19 14:24:44 +00:00
9813a10184
Driver for the 3ware Escalade family of RAID controllers.
2000-10-19 14:11:30 +00:00
b3434771a3
El-cheapo disk driver for RAID controllers. If this bugs you, let me know.
2000-10-19 14:06:02 +00:00
ad74c7dbd6
- Put comment about wsevent structure counts 0 for the left most mouse
...
button with a bit coding improvement.
- signed char -> int to hold integer values. Contributed 16 insn savings.
2000-10-19 10:27:04 +00:00
d239df5374
Adapt for script change: don't assume Ent_lun_switch_entry == 0
2000-10-19 07:22:06 +00:00
8561c00a0a
Regen
2000-10-19 07:20:33 +00:00
67618a69ae
Move restore_scntl3 before the lun switch, to ease freeing of unused lun
...
slots.
2000-10-19 07:20:16 +00:00
5247e9db0b
Regen.
2000-10-19 05:52:15 +00:00
24477b4281
Add the ICS Advent PCI-WDT500/501 watchdog timer boards.
2000-10-19 05:51:34 +00:00
f629a0ae67
Ops, add proper bus_dmamap_sync() calls for reselect switch operations.
2000-10-18 20:06:54 +00:00
9d3f5d7fbd
Adapt for new lun switch script.
...
Implement SCBUSACCEL ioctl.
Snapshot of work in progress on tagged queuing: we can send/receive
queue tag messages. Infrastructure to manage multiple commands per
devices not here yet.
2000-10-18 17:06:52 +00:00
b66120e445
Regen
2000-10-18 17:01:46 +00:00
75246b83c0
Redo the target/lun sw in a better way, and handle queue tag messages.
2000-10-18 17:01:13 +00:00
9836ff3913
Looks like frame size isn't checked; just say we can do VLAN MTU.
...
Tested with a SMC9432TX.
2000-10-18 16:49:13 +00:00
8ec46d1679
Fix off by one error when using RETURN, WHEN/IF ...
2000-10-18 16:05:23 +00:00
cecccb23b2
quiet chatty boot messages
2000-10-17 17:39:10 +00:00
f87b1573c3
Support ETHERCAP_VLAN_MTU by ignoring the EX_UPD_ERROR and EX_UPD_OVERSIZED
...
status bits. Tested with a 3c905-TX.
2000-10-17 16:16:52 +00:00
5cc13a273b
Support ETHERCAP_VLAN_MTU. It seems the chip doesn't check the frame size.
...
Tested with a NetVin 5000 and a WD8013EBT.
2000-10-17 16:14:42 +00:00
8130f0ec5d
Add a cis decoding function which decodes some CISTPL_FUNCE tuples for
...
disk and network functions.
2000-10-17 10:13:46 +00:00
8a526d9513
Remove sc_lance_dmam field from ioasic_softc structure. It was obsoluted
...
by the removal of ioasic_lance_dma_setup() made in if_le_ioasic.c 1.15.
2000-10-17 09:45:49 +00:00
f3d4ccd750
Have consistent #if's for machine dependent clauses.
2000-10-17 09:27:22 +00:00
1fd2521475
- efforts to merge TC Alpha and IOASIC DECstation, derived from Mattias
...
Drochner's work made in nisimura-pmax-wscons branch. Still a little
to do before useful for DECstation. MI softintr required.
- allow wildcard matchs to have zstty/zskbd/zsms in default hardware
configuration.
- abandon to check zs_ioasic_cnattach() return value; it doesn't fail.
- have zs_ioasic_cnattach() serial line parameters hardcoded inside, in
symmetry with zs_ioasic_lk201_cnattach().
2000-10-17 08:55:43 +00:00
f9a49b32bf
Don't touch a failed component at all. Thanks to Robert Elz (kre) for
...
noting the problem and providing additional comments.
2000-10-17 03:39:41 +00:00
6444136d42
cosmetic change.
2000-10-17 01:50:40 +00:00
1da5a95dc5
Oops, wdt_msec is a short, not a char.
2000-10-17 00:34:41 +00:00
4b0c3e182c
Fix a typo in an constant name that is currently unused.
2000-10-16 23:03:45 +00:00
a5e3251d5f
Register definitions for the Middle Digital, Inc. PC-Weasel
...
serial console board.
2000-10-16 22:59:24 +00:00
d01f7f6e2b
correct memory size to be mapped. PR 11242.
2000-10-16 10:26:41 +00:00
c64069308b
Make changes relevant to changes in WWN defaults.
...
Also fix egregious bug where we would never decrement
the islocked recursion counter. I guess this means
that we don't recurse on this platform! All of this should
go away when we have real lock primitives to use in drivers.
2000-10-16 05:18:15 +00:00
c7c2783178
Change some of the WWN macros- eliminate PORT_FROM_NODE_WWN and make
...
sure we have a DEFAULT_{PORT,NODE}WWN and ISP_{NODE,PORT}WWN macro
as a requirement for all platforms.
2000-10-16 05:16:56 +00:00
ffdbddbd79
Add in commented-out hiwater measurement.
...
Remove egregious older bug which had us refusing to log into
fabric devices unless they were NL ports. Whuff.
2000-10-16 05:15:55 +00:00
298ec0ecd9
Clarify/cleanup how node and port names are derived from nvram. Remove
...
clause 2 of licence. Remember to print initiator ID (LOGINFO level).
2000-10-16 05:15:05 +00:00
7cc31292b3
Turn on 32 byte bursting for ISP
2000-10-16 05:13:13 +00:00
3607efd3d7
Remember to establish default PORT WWN. Add in some LOGDEBUG2 messages
...
for the dma mapping code.
2000-10-16 05:12:26 +00:00
8ddb5fd594
roll SBus f/w to latest released level (1.37)
2000-10-16 05:10:37 +00:00
4318834442
Don't trim off the FCS, pass it up.
2000-10-15 19:56:31 +00:00
b4bbac9584
add Ricochet GS USB modem
2000-10-15 17:53:17 +00:00
83666f01fa
Shuffle printfs around so they look right when we've got a drive attached.
2000-10-14 23:45:57 +00:00
b885772956
The input packet has the FCS attached to set M_HASFCS before passing up.
...
Revove eh = ... since it's no longer used.
2000-10-14 20:06:02 +00:00
ca7bd5f302
Make sure wsmouseopen() returns ENXIO when no VSXXX mouse is attached.
2000-10-14 08:51:51 +00:00
c8d4a6140c
Regen
2000-10-14 06:23:21 +00:00
30dbba4dd1
Add ATI Mobility M3 (both PCI and AGP).
2000-10-14 06:12:46 +00:00
6e67f82712
Fix wi_intr() to avoid touching card registers during insert/remove events,
...
when sharing an interrupt with other devices:
check sc->sc_enabled, and drop the interrupt if its' off.
Also check for IFF_RUNNING, on advice of Enami Tsugotomo.
2000-10-13 19:15:08 +00:00
86974d7235
Regen.
2000-10-13 18:16:53 +00:00
67c8e3701d
A bunch of scanners.
2000-10-13 18:16:36 +00:00
764c5e3eea
Recognize HP 5300C.
2000-10-13 16:18:48 +00:00
8abfde6138
Regen.
2000-10-13 16:18:22 +00:00
54480a36e4
Add HP 5300C.
2000-10-13 16:18:02 +00:00
2898929f94
Revert previous since the finnish keymap is already present under
...
the name "sv". Note to myself: Read PRs completely before acting.
Note to Santa Claus: I want a mailing list that carries all follow
ups to PRs!
2000-10-13 12:53:23 +00:00
b5b3e28ce7
Add uscanner.
2000-10-13 12:31:10 +00:00
3a05d9ba7b
Avoid empty strings for vendor&product.
2000-10-12 23:11:04 +00:00
4ed4915295
Regen.
2000-10-12 22:51:42 +00:00
0b0fb8e466
Add Kingston KNU101TX Ethernet adapter.
2000-10-12 22:51:20 +00:00
06ab77c680
typo fix in comment (stallen -> stolen)
2000-10-12 12:42:52 +00:00
8a9e5b82d3
typo in comment (consifuration -> configuration)
2000-10-12 12:42:03 +00:00
38fd6528ac
Add finnish keymap, from Heikki Kallasjoki in PR/11186.
2000-10-12 12:41:22 +00:00
3a909c64a6
Use splnet instead of splimp in wi_ioctl.
2000-10-12 04:50:58 +00:00
4c00a9d6aa
Bail out initailzation on buffer allocation failure.
2000-10-12 03:29:59 +00:00
fc40c38df6
Minor fixup for a printf(). Noted by Robert Elz.
2000-10-12 03:28:49 +00:00
32e7a2cd70
hifn7751 crypto card driver. from openbsd.
...
does nothing useful at this moment - initailize the chip, that's all.
TODO: crypto logic framework in kernel (see openbsd sys/crypto)
TODO: ipsec frontend (need major rework in ipsec tree - should start with busywait)
TODO: character device frontend
2000-10-12 02:59:59 +00:00
8d7ce38746
regen
2000-10-12 02:54:13 +00:00
429b0af909
pci device ID for hifn 7751-based crypto cards. from openbsd.
2000-10-12 02:52:58 +00:00
b204f9e433
Use ether_ioctl.
2000-10-12 02:24:08 +00:00
2383226766
Silence format warning.
2000-10-11 22:03:33 +00:00
2198741306
Use ether_ioctl().
2000-10-11 16:57:45 +00:00
fcde56c9ba
Add flags to indicate that tlp_init() should set some more BUSMODE bits.
...
TULIPF_BLE /* data is big endian */
TULIPF_DBO /* descriptor is big endian */
These setting is required for Big-endian bus front-end (such as APbus for
newsmips) to work with tulip. Also,
sc_maxburst
member is added to the tulip_softc to limit the maximum burst length.
This member defaults to zero which means no restriction for burst length.
2000-10-11 14:59:52 +00:00
0abaf0f210
Fix compilation errors: unused variable & missing function return values.
2000-10-10 23:33:52 +00:00
41bb27ce0d
Regen.
2000-10-10 12:38:24 +00:00
1f06d9f822
Another vendor&product code.
2000-10-10 12:38:00 +00:00
8adc2fb7f3
Don't free unallocated pointer in detach (can happen if detach happens
...
before attach has finished).
2000-10-10 12:37:01 +00:00
b69ea2a63d
make it work right on non-32bit arch. from kjc@csl.sony.co.jp
2000-10-10 10:15:00 +00:00
64c818a7e2
Emit a warning when a symbol is undefined.
2000-10-09 15:57:56 +00:00
db6fba6bdf
Move inclusion of rnd.h and sys/rnd.h from tulip.c to tulipvar.h.
2000-10-09 14:31:01 +00:00
ca88e2b6bd
Make tulip a random source.
2000-10-09 12:54:28 +00:00
cc577ca5c6
Regen.
2000-10-08 23:57:10 +00:00
b132b36f4d
Add a few more devices (from FreeBSD).
2000-10-08 23:56:53 +00:00
62fb025c5c
Regen.
2000-10-08 21:26:47 +00:00
447c19ac22
Add another DLINK adapter.
2000-10-08 21:26:26 +00:00
966f1692e1
Don't use a plural `s' if there is only one button.
2000-10-08 20:52:18 +00:00
b6db5a8622
Regen.
2000-10-08 20:51:30 +00:00
3598b417a3
Add a Fuji camera.
2000-10-08 20:51:00 +00:00
a3dbabc67b
Update for current PCI device class/subclass and capability codes.
...
(also, tweak the I2O subclass string to be "standard" -- the removal
of version info didn't extend that far.)
2000-10-07 18:58:13 +00:00
34f3869cdc
Change int->bus_addr_t in com_kgdb_attach() prototype.
...
Compiles again with KGDB enabled.
2000-10-06 21:12:01 +00:00
f6bf6762ab
Ops, disable debugging messages.
2000-10-06 20:07:10 +00:00
c8ad9b6302
Regen
2000-10-06 16:39:22 +00:00
171adcf634
Fix recurent typo: shed->sched
2000-10-06 16:39:04 +00:00
e353a6d9b2
Adapt for reselect handling from the script. While here, fix typo
...
(SIOP_SCXFER -> SIOP_SXFER).
2000-10-06 16:35:13 +00:00
eae96f0267
Regen
2000-10-06 16:31:31 +00:00
c67eef4e7d
Handle reselect entirely in script; for this provide a script area,
...
modified by the driver, which will load the appropriate DSA for a given
target/lun.
2000-10-06 16:31:17 +00:00
5df1120c67
Add some more completion status codes.
2000-10-05 11:23:05 +00:00
2e6cb6a878
When 802.1Q MTU, we have to ignore the Frame Too Long errors, and there's no
...
need to disable RWT and JAB.
2000-10-05 07:22:43 +00:00
7ce859b8d0
Allow 16-bit only speakers to work.
2000-10-05 01:35:07 +00:00
cc135eb39f
Add MI mk48txx.
2000-10-04 18:44:24 +00:00
d11ef545cd
Enable sanity checks in mk48txx_gettime().
...
(Many news68k have dead NVRAM.)
2000-10-04 17:00:45 +00:00
a2c02690af
only VT82C586A rev >= 6 supports Ultra-DMA. From OpenBSD.
2000-10-04 09:34:09 +00:00
5d4d9ec965
Update with uscanner.c
2000-10-04 02:45:07 +00:00
c068cf3953
Regen.
2000-10-04 02:09:37 +00:00
9d09a17e7c
Add more vendors.
2000-10-04 02:09:07 +00:00
5fcde4924f
Support ETHERCAP_VLAN_MTU by igorning Receive Watchdog and Transmit Jabber
...
errors if VLANs are configured on the interface.
2000-10-03 23:35:55 +00:00
cbfe7605c9
Support ETHERCAP_VLAN_MTU by doing extra error checking upon packet
...
reception and saving other "bad frames" (i.e. ones that are larger
than the standard Ethernet frame length) if we have VLANs configured
on the interface.
2000-10-03 23:35:02 +00:00
5d4fa9b0ce
Revert rev 1.31 of bha.c (and associtated changes in the headers and
...
config glue files).
Fixes PR kern/9841. Tested by Tracy J. Di Marco White with a bt948
and 6 disks.
2000-10-03 14:07:36 +00:00
91959d389e
Typo in comment.
2000-10-03 13:54:02 +00:00
33e8ebeef3
1970 -> POSIX_BASE_YEAR
2000-10-03 13:52:39 +00:00
df9baa1d7a
Move #define POSIX_BASE_YEAR to clock_subr.h.
2000-10-03 13:41:07 +00:00
5c0aabad0d
For SECDAY, use "24 * 60 * 60" rather than "86400".
2000-10-03 13:00:30 +00:00
623aae812b
Only probe for drive 0. Fix es problem reported by Nathan Williams
...
<nathanw@MIT.EDU>.
2000-10-03 04:33:03 +00:00
7edd5d54bc
Add support for the ADMtek AN983 and AN985.
2000-10-03 04:32:00 +00:00
4462a44b87
Regen: ADMtek AN985
2000-10-03 02:59:05 +00:00
618e7b93c6
Add ADMtek AN985 10/100 Ethernet.
2000-10-03 02:58:30 +00:00
10da4aa927
Add MI md_root.c, per discussion on tech-kern.
2000-10-02 15:22:32 +00:00
903ae58e7b
I2O subclasses currently have nothing to do with the protocol version.
2000-10-02 14:48:13 +00:00
1af3d80bce
fix compilation without INET.
2000-10-02 03:53:07 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
3e401aa14d
upl(4) is a IPv4 only device.
2000-10-01 11:35:28 +00:00
dcfcbaf8ae
- Add ioctl commands to wsdisplay which set/get some LCD status,
...
backlight, brightness and contrast.
- Add 9 command key symbols which make wskbd to call wsdisplay's
iocontrol.
- Add special key map variant KB_MACHDEP. This variant does not
have any real keymap but it's just a placeholder for machine dependent
maps which will be overwrite by machine dependent keyboard driver.
2000-10-01 03:29:12 +00:00
9a37177d17
fix 16BPP support (for next68k), from Timm Wetzel.
2000-09-29 06:29:47 +00:00
710c43c745
6 -> ETHER_ADDR_LEN
2000-09-28 10:56:57 +00:00
f4ef578da7
6 -> ETHER_ADDR_LEN
2000-09-28 10:29:42 +00:00
ab9b015dce
6 -> ETHER_ADDR_LEN
2000-09-28 10:10:14 +00:00
b4b2cdf575
Replace misused DIAGNOSTIC with WI_DEBUG.
2000-09-28 06:29:41 +00:00
ragge