550bb5fbb2
Make yeartonum/numtoyear visible.
2000-07-26 11:54:32 +00:00
c034e1d483
VAX-specific bi support changes.
2000-07-26 11:53:30 +00:00
9c3b3ed9c6
Discover the KA88 cpu.
2000-07-26 11:50:51 +00:00
3a73106b1b
KA88 console support.
2000-07-26 11:50:16 +00:00
0aeb2853f9
Support for a machine-specific badaddr handler.
2000-07-26 11:48:50 +00:00
b38b1995fa
Support for the KA88 CPU and the NMI backplane.
2000-07-26 11:47:15 +00:00
851da6dda0
Remove the use of global "mastercpu", the world is different now.
2000-07-26 11:44:25 +00:00
001420d7ea
Remove unneeded include.
2000-07-26 11:42:41 +00:00
4a3cba7a65
Pull in <dev/clock_subr.h>.
2000-07-26 11:28:36 +00:00
5d162e9bcf
Add Sigma Designs L-View and AsanteFAST product codes.
2000-07-26 04:36:16 +00:00
98cdbc4cc9
Remove advertising clause with my name.
2000-07-26 04:35:46 +00:00
11142830f9
Switch back to newvers_stand.sh. Dunno why it bombed the first time.
2000-07-25 21:53:55 +00:00
f343e5777c
Add `dma' to the `early device' list, since we need it before an `esp'
...
is configured. Traced and tested by Julian Coleman.
2000-07-25 21:50:03 +00:00
2f335ce72b
Nuke __BROKEN_DK_ESTABLISH, and add __HAVE_DEVICE_REGISTER.
2000-07-25 20:52:27 +00:00
714a495a4a
Duh, hp300 -> sparc64.
2000-07-25 20:48:19 +00:00
234b20f27c
Put back missing newvers.sh.
2000-07-25 20:47:44 +00:00
71538e8894
Fix mips3 outofworld to panic cleanly even if shutdown path misses K2.
...
Previously we jal to panic which never cleared the tlb fault, so if
on the course of shutdown (like a doshutdownhooks() callback) missed
K2, it would panic again. Fix by setting EPC to panic() and eret.
2000-07-25 18:06:49 +00:00
3a90817270
Add option to apply additional mask to the SR at run-time for MIPS3 platforms.
...
By default this is off, and only slightly changes the code to load SR when
a temp register is available. This can be used by the platform code to
handle slow to clear interrupts (our case) or to mask off any interrupt
any interrupt at run-time. This can be very useful for embedded platforms
that have less than desirable interrupt properties.
2000-07-25 17:56:05 +00:00
219910d2e6
add disabled LOCKDEBUG; re-enable all the phy drivers
2000-07-25 17:26:36 +00:00
320361c474
Re-instate a couple of delay slot NOPs marked `XXX spitfire bug?'
2000-07-25 15:15:32 +00:00
6c80daae8d
Ignore all undefined bits in the Tadpole microcontroller status register.
...
Only the low nibble is defined, and on at least one 3gx (mine) there is an
undefined bit which reads as a one -- bit 6 (0x40). This screwed tctrl_intr()
which would loop forever, thinking it always had new events to process.
2000-07-25 09:57:59 +00:00
46ab3e89fb
Use libsa alloc().
2000-07-25 06:26:18 +00:00
dd54c272e5
Add ofwboot.{mrg,xcf} to CLEANFILES.
2000-07-25 06:22:05 +00:00
8dc7633036
Make this compile again.
2000-07-25 06:18:23 +00:00
13f68a994d
Enable console in initppc().
2000-07-25 05:44:27 +00:00
7cf89e2181
Allocate temporary buffer to copy OF page table dynamically
...
rather than static variable.
2000-07-25 05:41:30 +00:00
e651decb55
We don't need to include the # VIA VT82C686A integrated AC'97 Audio as it
...
is integrated into the Southbridge on a number of i386 motherboards - we
won't be seeing that in a mac. :-)
2000-07-25 02:33:30 +00:00
a6d6bce652
Add a bunch of pci audio drivers. Most are commented out as they haven't
...
been tested on macppc. But I tested the eap for playback and it's fine.
2000-07-25 01:39:22 +00:00
05587c68ae
Correct typo in comment.
2000-07-25 00:11:36 +00:00
747fe6b40d
French/Finnish/German/Norwegian keyboard support; ported by Thomas Runge from the i386 pccons.c. Minus the iso8859-1 to pc437 translation which isn't needed on the DNARD.
2000-07-24 22:05:27 +00:00
ee0e9a4283
French/Finnish/German/Norwegian keyboard support; ported by Thomas Runge
...
from the i386 pccons.c. Minus the iso8859-1 to pc437 translation which
isn't needed on the DNARD.
2000-07-24 21:56:09 +00:00
7dad7ceb84
Use new uvm_km_valloc_prefer_wait() in vmapbuf(). This lets the K2
...
mapping of b_data have the same virtual index, so the mapping does
not degenerate into uncached in pmap_enter().
2000-07-24 20:16:29 +00:00
0cd22457c9
add netboot.bin to CLEANFILES
2000-07-24 18:43:16 +00:00
921705c3eb
cleanup Makefiles, put common stuff to Makefile.booters, ditch unnecessary
...
stuff
make this all compile with -Wall -Wno-main -Wmissing-prototypes
-Wstrict-prototypes -Werror , also compilable on 1.4.1
label itself as NetBSD/mvme68k instead of "BSD" in bootblock message
move bugcrt.c to libbug, remove bugcrt directory (bugcrt is still built
and used separately to rest of libbug)
convert sboot to use ordinary mvme68 libsa, instead of copying needed
stuff in libc_sa.c
convert to use version info generated by sys/conf/newvers_stand.sh
instead of previous version.c files, add necessary 'version' files
put chiptotime() to separate libsa file (used also by sboot/clock.c)
Thanks to Steve Woodford for help with this. Note that -current build
might be hosed by this change, will be addressed by Steve shortly.
2000-07-24 18:39:01 +00:00
b77782d785
Optimization to pmap_zero_page(): we only need to use the first 16 FP regs,
...
as in bzero().
2000-07-24 16:21:02 +00:00
fe9795a1e5
Fix a whitespace glitch.
2000-07-24 16:08:18 +00:00
a0ae8e1ecb
Pull in the bzero() changes from libc for real, with a couple of kernel-
...
specific hacks:
* Make the bias handling depend on STKB, so it switches correctly for 32-bit
kernels.
* Use the 32-bit stw/ld for 32-bit kernels.
* Add a few `-STKB's that were missed in the previous change.
2000-07-24 15:57:07 +00:00
751028f9c1
CopyToBuffer/CopyFromBuffer are used by sii/xsii and nothing else.
2000-07-24 15:07:02 +00:00
98127a7ee3
Cosmetic & readability:
...
- local label cleanup in interrupt handling code;
- in debugging sections when testing `intrdebug': use a unique
local label (97) to enhanced clarity;
- comment-out unused code;
- kill a bug as the satisfying result of doing all of the above.
2000-07-24 14:55:56 +00:00
f054f5b190
Allow probe for SCSI tape drives even if no SCSI disk drives are configured.
2000-07-24 11:44:33 +00:00
78abb015f5
G/C the IIO* #defines. They're no longer needed.
2000-07-24 11:20:47 +00:00
a943e81da4
Delete kernfs.
2000-07-24 10:04:10 +00:00
2688608c2b
Pass the boot partition number into the loaded kernel, in preparation
...
for doing away with __BROKEN_DK_ESTABLISH.
2000-07-24 09:25:53 +00:00
1045aba51d
Define UVM_PAGE_IDLE_ZERO.
2000-07-24 09:14:56 +00:00
a95d924d4d
Fix delay slot error in the SUN4_MMU3L startup code.
2000-07-24 08:48:03 +00:00
2933116823
Fix stack issues in bzero.
2000-07-24 07:40:40 +00:00
2f13e00500
Revert the previous change for now. I don't have time to debug it tonight.
2000-07-24 06:30:34 +00:00
ac182d9c19
Er, eliminate the -p link option as well, which just outputs huge amounts
...
of spooge.
2000-07-24 04:54:16 +00:00
711ffefeac
Nuke lderr.
2000-07-24 04:45:49 +00:00
0c2ad746ea
Slight rearrangement.
2000-07-24 04:39:01 +00:00
4cbff173ea
Fix an obvious error that would cause fpu_ftoxi() to drop the upper half.
...
The compiler even emitted a warning for this...
2000-07-24 04:13:45 +00:00
bdc8c86c9e
asm volatile --> __asm __volatile
2000-07-24 04:11:03 +00:00
b65d3e93c9
Make this a bit safer against errors by using some .tmp files.
2000-07-24 02:00:39 +00:00
62fe935649
Give this a prayer of working with obj dirs.
2000-07-24 01:55:59 +00:00
8de9ab874b
Make this at least pretend to compile.
2000-07-24 01:51:44 +00:00
51b68e1fdd
Fix compiler warnings.
2000-07-24 01:49:37 +00:00
2f39009bda
Fix multiple problems with floating point and structure handling.
2000-07-23 21:36:56 +00:00
41167b7f9a
__BROKEN_CONFIG_UNIT_USAGE is no longer required for mvme68k.
2000-07-23 20:51:18 +00:00
2f194db83c
G/C cf_unit. It wasn't really being used in a meaningfull way.
2000-07-23 20:50:21 +00:00
e98c241a12
Make these work with obj directories.
2000-07-23 20:40:44 +00:00
acbf46fbf4
Copy bzero change from libc.
2000-07-23 20:39:14 +00:00
aa381d4db2
Add WSEMUL_VT100 to configuration files using wsdisplay.
...
And update my current configuration. (MIMORI)
2000-07-23 10:06:43 +00:00
999ba2b285
Give 64-bit processes access to a full 64-bit address space (90% of which
...
they can't use anyway, but that's another issue.)
2000-07-23 07:02:19 +00:00
526bc1de59
Include <machine/frame.h> to get the definition of BIAS and CC64FSZ.
2000-07-23 06:57:55 +00:00
46a7cab70a
make this usable for for userland asm, which needs CC64FSZ
2000-07-23 06:15:33 +00:00
f6ce16a43b
Fix up alignment of incoming payloads. BOOTP at least now works.
2000-07-22 21:30:54 +00:00
a57e77c50f
Minor comment update; remove unused code.
2000-07-22 21:23:05 +00:00
87143d03cf
Include <sys/systm.h>, if only for printf() prototype.
2000-07-22 19:43:03 +00:00
a86a9c61c4
better message from John Hawkinson <jhawk@MIT.EDU>
2000-07-22 17:43:36 +00:00
9c47f8b134
Read the ECID from each podule just before we launch the kernel. This means
...
that the ROM page registers on the podules are likely to end up pointing at
the page with the ECID in it, so NetBSD can recognise the podules.
This is necessary for my i-cubed EtherLan cards, at least.
2000-07-22 15:36:15 +00:00
2e61c1bdb7
Correct spelling and capitalisation of "EtherLan".
...
Add EtherLan 100Lk (8-bit mini-podule).
2000-07-22 15:05:47 +00:00
733c04149a
Experimental MQ200 video driver. It's just copy of bivideo plus power
...
management routine.
2000-07-22 08:53:33 +00:00
d84cab3012
vrkiu_getc() will call over and over. but we want to see 'not implemented'
...
only once.
2000-07-22 08:26:00 +00:00
db17c07fd3
mb_bus_space_init() had been removed accidentally when KGDB was supported.
...
It's need for initialize system_bus_iot.
2000-07-22 06:02:46 +00:00
a6f212052a
Enable emulation for everything but 7xx/8xxxx
2000-07-22 05:03:23 +00:00
ecdd72f783
Overwrite color map of rasops.
2000-07-22 03:46:53 +00:00
21d18c459f
do bootblock versioning standard way via sys/conf/newvers_stand.sh, keep what
...
was previously called "subversion" as "build", remove old cruft from newvers.sh
XXX very lighly tested build on NetBSD/hp300 1.4.1, though could not do full
XXX build due to toolchain differences to -current
2000-07-21 22:26:19 +00:00
01d7296690
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
sync the message in boot/version with other ports using newvers_stand.sh
2000-07-21 22:06:11 +00:00
ab07c9d5a9
switch to sys/conf/newvers_stand.sh for generation of version file
...
sync the message in boot/version with other ports using newvers_stand.sh
2000-07-21 22:02:54 +00:00
d89f124868
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
sync the message in boot/version with other ports using newvers_stand.sh
2000-07-21 21:57:23 +00:00
0ebf73d4cf
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
2000-07-21 21:54:54 +00:00
20933708ec
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
2000-07-21 21:42:25 +00:00
4c97163e2d
switch to sys/conf/newvers_stand.sh for generation of version files, no
...
functional changes
2000-07-21 21:34:27 +00:00
911d661dad
switch to sys/conf/newvers_stand.sh for generation of version files
...
move the vers.c depend/build goo to Makefile.bootprogs and remove
explicit rules in other Makefiles
sync the message in */version files with other ports using newvers_stand.sh
XXX the new depend rules were tested to limited extend (also with obj dirs)
XXX on i386 and should be ok; the changes should not otherwise influence build
2000-07-21 21:25:18 +00:00
1cce37b1f4
Make this compile again.
2000-07-21 20:18:35 +00:00
d6d63e19fe
G/C a debugging printf left over from the last commit.
2000-07-21 08:08:38 +00:00
263f73d7f4
Now we're running 64-bit userland don't panic the system if a process steps
...
into the address space hole.
2000-07-20 23:29:50 +00:00
0e306bace6
kgdb support for the vr hpcmips machines.
...
From Ethan Solomita (ethan@geocast.com ).
2000-07-20 21:03:36 +00:00
0a25b480c6
Clean up disassembly of sparc v9 insns and handling of negative values.
2000-07-20 20:43:21 +00:00
83e678b1a4
Implement generic soft interrupts for mvme68k.
...
Based on Jason Thorpe's Alpha implementation.
2000-07-20 20:40:34 +00:00
da2949153f
Disable dtide since it doesn't work (and probably never will -- the card's
...
brain-dead).
2000-07-20 20:27:11 +00:00
6744ec9f53
Include locore.S in the main assembly mkdep.
2000-07-20 20:26:32 +00:00
b5d3226a07
General tidying up, notably:
...
- Get the Ethernet address from the card's description string, rather than
relying on RISC OS to set it.
- Don't mention this is a SEEQ8005 -- that's all an "ea" can be.
- Use format_bytes to display the amount of buffer RAM.
2000-07-20 20:25:10 +00:00
2ebdfcd251
Make pmap_prefer() use a global setting based on cache size
...
instead of assuming 64KB. This allows best fit and will
support bigger caches.
2000-07-20 18:33:40 +00:00
c8b819c2ed
Include kgdb hooks in trap.c. Include bits of DDB code for kgdb also. Remove
...
some local prototypes that are in headers now.
2000-07-20 18:14:46 +00:00
4badffe2c1
For now, alias `network' to `hme'.
2000-07-20 16:29:03 +00:00
71169064c4
Since `intrcnt' points to an array of long ints, reserve the appropriate
...
amount of space depending on _LP64. Provide macros to load/store signed
and unsigned long ints.
Also, make the `intrcnt' and `intrpending' arrays 16 entries long, as on
sparc/v9 interrupt #15 is just a regular interrupt.
2000-07-20 13:28:39 +00:00
23f2392b19
don't define TAILQ_FOREACH, it's in sys/queue.h now.
2000-07-20 03:44:46 +00:00
d8d3c52075
Move masked status and instr into jal cpu_intr delay slot.
2000-07-20 00:43:07 +00:00
5938072101
In FPU excepton code, send SIGILL if no one claims the instruction.
...
SIGFPE is still delivered where appropriate.
2000-07-19 22:05:02 +00:00
96122c2884
Do mtpr(0, PR_TBIA), not mtpr(1, PR_TBIA). This has worked on all CPUs
...
except for KA88.
2000-07-19 21:08:06 +00:00
64d555c075
Improve outofworld: to include the vaddr. Removed unused mips3_Set64bit
...
and an #if 1.
2000-07-19 20:46:00 +00:00
b14e1fbbd4
Tpyo
2000-07-19 20:29:45 +00:00
f079e15d48
- Remove asc driver, since it doesn't work
...
- Reduce maxusers to 2
2000-07-19 19:41:48 +00:00
32ee71ac65
Fix stacktrace() to have an 8 byte aligned stack. On our platform previously
...
it would hang-up. logstacktrace() actually was the same as stacktrace() so
just make it an XLEAF() for now. Include some DDB code for KGDB compilation.
2000-07-19 18:56:36 +00:00
8b8bf4501b
At the start of the kernel, keep the MIPS3_SR_DIAG_BEV setting
...
on mips3 systems, until the kernel actually hooks the vectors.
This makes it easier to debug early problems if the firmware
has provides an exception handler.
2000-07-19 18:38:41 +00:00
38c659cca5
Include ELF support by default.
2000-07-19 18:29:21 +00:00
8e9ff5814e
More ELF changes (a.out still works).
2000-07-19 18:15:01 +00:00
9faf26ffb5
This file is obsolsete.
2000-07-19 17:39:57 +00:00
8c2ce5b135
New configuration, based on GENERIC, but small enough to fit on a system
...
with 4Mb of RAM (I hope).
2000-07-19 16:39:30 +00:00
6996dd8691
Fix merge problem.
2000-07-19 15:48:25 +00:00
25f8633edd
Add an option to poll the ROM console from hardclock you can break into DDB
...
even if callouts are disabled.
2000-07-19 15:41:53 +00:00
e72ba11928
In cpu_switch(), load value *after* checking that the base register
...
is not NULL.
2000-07-19 14:00:24 +00:00
5867f914e8
Add (commented out) "options TCVERBOSE".
2000-07-19 10:42:22 +00:00
e3fc09812a
make myetheraddr() work even if the clock hasn't been setup yet
2000-07-19 10:20:09 +00:00
422e1b7236
Disable interrupt interlock using ih->ih_pending field. Seems to cause
...
more problems than it solves.
2000-07-19 04:36:42 +00:00
625dc5189f
Miscellaneous cleanup.
2000-07-19 03:24:07 +00:00
d66b7dcc2d
Switch to loadfile instead of exec. Now we can load a.out or ELF kernels.
2000-07-19 02:39:11 +00:00
ad99ca5ed2
use size_t instead of u_int.
2000-07-19 01:02:52 +00:00
ab5d2882a0
Move KA630 definitions from boot/boot/consio.c to here.
2000-07-19 01:01:58 +00:00
15c6bb6dbd
ELFify (udiv -> __udiv, urem -> __rem)
2000-07-19 01:01:02 +00:00
732a08c3c3
Put the assembly consio routines in a separate file so it can deal with
...
a.out/ELF differences.
2000-07-19 00:59:20 +00:00
9b4c867626
Add support for loading a 2nd stage boot in either a.out or ELF.
...
Add support for loading a 2nd stage boot directly to it's desired address
if possible.
cleanup use of u_int/size_t.
2000-07-19 00:58:23 +00:00
067b7521b5
Fix PIC bugs.
2000-07-18 22:38:11 +00:00
59a7148fe9
address casts: long -> u_long
2000-07-18 20:19:56 +00:00
db76bf893e
Cast pointer to `u_long' (not `long') for correct results.
2000-07-18 20:15:36 +00:00
602e908589
Correct args usage comment in probeget.
...
Whitespace cleanup.
2000-07-18 20:14:45 +00:00
1d14ce3842
probeget: 9 -> 0x9
2000-07-18 19:27:57 +00:00
c0e91fb184
If `ih_pending' is set simply return from the trap, don't schedule another
...
soft interrupt.
2000-07-18 19:25:26 +00:00
a49fddc9b3
openfirmware: don't lower %pil
2000-07-18 12:52:56 +00:00
9cb57a12a7
Change KERNBASE to 0xe0000000 to give more room for KVA. This is the maximum
...
amount of KVA that is supportable on the ns32532.
2000-07-18 12:45:49 +00:00
36b85ab9c7
hexadecimal constant in "options" value doesn't need quotation.
2000-07-18 11:41:32 +00:00
87b0dd6e6a
make PCIBIOS_IRQS_HINT patchable.
2000-07-18 11:37:56 +00:00
34270e85bd
Use probeget() in pci_config_read() for the psycho, to avoid bus
...
faults when probing PCI space.
2000-07-18 11:37:31 +00:00
073e24cd1b
Set up register bank sharing bwteen psycho A & B based on matching
...
physical addresses. Allocate IOMMU state separately and refer to it
from both psycho_softc's.
2000-07-18 11:35:03 +00:00
52e3dc4e56
use I386_PCI_INTERRUPT_LINE_NO_CONNECTION instead of magic number.
2000-07-18 11:24:09 +00:00
663add1b20
use PCI_INTERRUPT_PIN_MAX and I386_PCI_INTERRUPT_LINE_NO_CONNECTION,
...
instead of magic number
2000-07-18 11:23:28 +00:00
81858d7c01
- Use PCIBIOS_PRINTV().
...
- Use PCI_INTERRUPT_PIN_MAX and I386_PCI_INTERRUPT_LINE_NO_CONNECTION
instead of magic number.
the Following changes are
{Modified with,Approved by} UCHIYAMA Yasushi <uch@netbsd.org>:
- Do not touch a PIRQ router, if the PIRQ is already routed
by the BIOS, or no appropriate IRQ is found for the PIRQ.
The latter prevents a panic on the machine of Frank van der Linden.
- Do not modify a PCI Interrupt Configuration register,
if it is already set by the BIOS, even if it is inconsistent
with the PCI IRQ routing table provided by the BIOS.
(The PCI Interrupt Configuration register seems to be more reliable
than the PCI IRQ routing table.)
This is needed to prevent a incorrect header_fixup() caused
by the incorrect PIR table on a Panasonic Let's Note AL-N2T516J5.
Provide "options PCIBIOS_INTR_FIXUP_FORCE" to retain
previous behavior, i.e. believe the PCI IRQ routing table
and ignore the PCI Interrupt Configuration register.
Although I'm not sure this is really needed.
- Do not modify a PCI Interrupt Configuration register,
if appropriate IRQ is not found for the link.
- Move a pciintr_icu_getclink() call and a pciintr_icu_get_intr()
call from pciintr_link_fixup() to pciintr_link_alloc(),
and only allocate pciintr_link_map if those calls succeeded.
This reduces number of calls of pciintr_icu_getclink(),
and also avoid necessity to validate a clink value in
ICU's {get,set}_{intr,trigger}() functions.
The sanity checks are not removed yet, though.
- Fix uninitialized usage of variable `bitmap' on stage 3
of pciintr_link_fixup().
- Remove a member variable `old_irq' from struct pciintr_link_map.
- Always use 0x%02x for printf format of canonical link value.
- Use DIAGNOSTIC instead of PCIINTR_DEBUG for really weird situation.
2000-07-18 11:22:36 +00:00
b01ab37ef6
use PCIBIOS_PRINTV() defined in pcibios.h, instead of homegrown DPRINTF().
2000-07-18 11:18:04 +00:00
698b2b1173
- define pcibiosverbose here, instead of each C source.
...
- use PIR_DEVFUNC_{DEVICE,FUNCTION}.
2000-07-18 11:15:25 +00:00
0e8343265b
- define PCIBIOS_PRINTV() as pcibiosverbose printf() here,
...
instead of DPRINTF() in each C source.
- define PIR_DEVFUNC_{DEVICE,FUNCTION}
2000-07-18 11:14:06 +00:00
2f9cb9c128
add several debug printf which can be enabled by PIIX_DEBUG.
2000-07-18 11:10:22 +00:00
9a7e0d82ac
- deal with FIRESTAR_PIR_SELECT_PIRQ case on set/get_trigger(),
...
to prevent a panic on a Panasonic Let's Note AL-N2T516J5.
- add several debug printf which can be enabled by FIRESTARDEBUG.
by UCHIYAMA Yasushi <uch@netbsd.org>
- use I386_PCI_INTERRUPT_LINE_NO_CONNECTION instead of magic number.
2000-07-18 11:07:20 +00:00
b8a6bd6e11
add "#define I386_PCI_INTERRUPT_LINE_NO_CONNECTION 0xff"
2000-07-18 11:00:35 +00:00
f7dacc7a8e
Use spl*_noprof routines to raise and lower spl for kernel profiling.
...
This keeps the SR management more contained in locore, and should
be roughly the same performance as the .text size is less. Talked
to simonb and he was ok with this change.
2000-07-18 06:25:32 +00:00
ea0cb4c30e
Clear the ISDN TXPTR/RXPTR/OVRN interrupt bits here. Based on
...
a suggestion by Gregory McGarry.
2000-07-18 06:10:06 +00:00
faaa100d6e
#if 0 some dumpsys() debugging messages
2000-07-18 05:18:35 +00:00
d2626038cd
kill dead files.
2000-07-18 04:21:17 +00:00
040268c10e
s/auxreg/auxio/
2000-07-18 04:17:23 +00:00
8e5b35a55a
Fix FP exception handling that was recently broken and would not
...
run src/regress cleanly. Need to save and restore the frame pointer
for fpemul_sig*().
2000-07-18 00:41:18 +00:00
5961b67774
if MIPS3_ENABLE_CLOCK_INTR is defined, set MIPS3_[HARD_]INT_MASK
...
appropriately. This supports ports that use the internal clock.
Add 2 diag register defines that are specific to QED processors.
2000-07-17 23:35:13 +00:00
0e0c4d24e8
Move platform db_trap callback from arch/mips into ddb as suggested by
...
jhawk. This callback is used by platform code to manage things like
watchdogs that should be disabled while in ddb. Done as a callback
for processors such as mips that support lots of different systems.
2000-07-17 19:57:49 +00:00
1d1b0968f1
IF we're changing hz, change tick accordingly too.
2000-07-17 18:32:25 +00:00
ec726f07ca
Kill typos in interrupt code.
2000-07-17 17:06:00 +00:00
0eb897823b
There is no music device - g.c. its cdev_decl.
2000-07-17 16:57:19 +00:00
71ccd6200d
Add (but commented) COMPAT_PECOFF entry.
2000-07-17 14:37:53 +00:00
966115ff9e
probeget: do the same song and dance as ld*a() macros in ctlreg.h do.
2000-07-17 14:08:43 +00:00
efabca31b5
Make memcpy() the favored interface an swizzle the args for ovbcopy. Also
...
move bcopy XLEAF here from locore.S. For 64b clean compilation add a
ld/sd section to the block copy.
2000-07-17 07:37:50 +00:00
2fd0d88f44
Use <uvm/uvm_extern.h> instead of vm/vm.h
2000-07-17 07:06:13 +00:00
116a6f8233
Pull in geocast mips ddb improvements and start bringing in kgdb support.
...
Add ddb support for QED opcodes, fill in enough routines so "next" usually
works, kdbpoke support for any size. Add callback that ports can hook when
entering and leaving ddb. This can be used for things like turning
off watchdogs while in ddb.
2000-07-17 07:04:19 +00:00
fc1ba82306
Make this compile again: restore missing prototype.
2000-07-17 06:53:42 +00:00
d63c5d05ce
Catch up with d_mmap parameter change. From Steve Peurifoy via PR #10603 .
2000-07-17 06:52:31 +00:00
b4f5693f98
Repair format type mismatch in DEBUG code. From Steve Peurifoy via PR #10603 .
2000-07-17 06:51:18 +00:00
196f358a96
Correct return type of grfaddr(). From Steve Peurifoy via PR #10603 .
2000-07-17 06:50:32 +00:00
5edc9ef4a4
When computing the segment size, consider the maximum segment
...
size in the DMA map.
2000-07-17 04:47:56 +00:00
f96915efa5
Changes so that the kernel can be compiled under __ELF__.
2000-07-17 02:54:04 +00:00
5d9fda1ecd
switch size_t, ptrdiff_t, & ssize_t to long int (signed or unsigned) for
...
__ELF__.
2000-07-17 02:52:24 +00:00
77c0fe57cf
convert to use version template and newvers_stand.sh script for generating
...
bootblock revision strings, use bootbock_name[] (i.e. "NetBSD/sun3")
in initial bootblock messages instead of just "NetBSD"
while here, do sligh Makefile cleanup to share more code between them and also
to make buildable on NetBSD 1.4.1 (my test compile system)
get rid of the XX define hack for netboot & ufsboot, build xxboot.c as
part of libsa - previos main() was renamed to xxboot_main(), main()
is now in respective conf.c files and calls xxboot_main() with
appropriate name of boot block type
XXX I had no chance to actually test the resulting bootblocks, but the
changes were fairly streightforward and should no influence functionality of
boot code
2000-07-16 21:56:12 +00:00
d9151a2dc8
Add a uuencoded tokenised BASIC version of BBBB, since it can't yet be
...
generated without RISC OS.
2000-07-16 12:54:04 +00:00
87dbab4963
Warn about <8bpp screen modes.
...
Fix a typo in "page in use" message.
2000-07-16 12:46:50 +00:00
480203ba75
change intptr_t and uintptr_t to long and unsigned long respectively. This
...
is a noop on 32 bit machines, but it makes lint quiet and it is more correct.
2000-07-16 02:18:11 +00:00
2890290b0f
Add com* at obio0. (Tadpole & JavaStation)
2000-07-15 19:59:53 +00:00
1d97a430c4
Enhance this so it support the com port on the JavaStation 1 as well as
...
the tadpole internal modem.
2000-07-15 19:57:03 +00:00
83e844cf03
Add a prototype for netintr()
2000-07-15 19:17:19 +00:00
b3b275a389
The install ramdisk has grown somewhat, and now overwrites the
...
`ie' chip's packet buffer... Moving it up to just below the netboot
image (4MB) should leave room for a few more year's bloat. ;-)
2000-07-15 16:04:24 +00:00
eb5863f522
#ifdef BOOT_DEBUG --> BDPRINTF(PDB_BOOT, (...))
2000-07-15 14:26:39 +00:00
4eacbabe76
Make 64-bit stack tracebacks look decent.
2000-07-14 21:07:10 +00:00
6667752114
Move some macro definitions out of genassym and into locore.s
2000-07-14 21:04:16 +00:00
3143adecfb
Tell gcc that stores clobber "memory". Probably makes no difference since
...
they should not be used to access normal memory anyway.
2000-07-14 21:02:11 +00:00
41da794863
Make all the inline functions static.
2000-07-14 21:00:17 +00:00
7b6085ff22
Add support for 64-bit PIC and dynamic linking.
2000-07-14 20:59:07 +00:00
1dfa0ec96d
Use cpu_intr() definition from mips/cpu.h instead of local one.
2000-07-14 18:35:38 +00:00
9de310aebe
Use per-PBM control/status register addresses provided by the PROM.
...
Print version/implementation info.
2000-07-14 15:13:35 +00:00
04fe9636ba
Provide details on the `psy_csr' register.
2000-07-14 15:09:51 +00:00
8258c0e780
Fix padding in struct pci_ctl.
2000-07-14 13:17:12 +00:00
e5a9cce870
Cast physmem to u_int64_t before applying ctob().
2000-07-14 13:15:44 +00:00
68edef1bf6
Back out previous for now; it requires a system wide prototype change.
2000-07-14 09:58:52 +00:00
2d699aa6ce
Change some comment formatting.
2000-07-14 08:21:14 +00:00
0688add8e8
Take care of prototype changes for console probe and console getc.
2000-07-14 08:18:49 +00:00
500013914e
Make timebase frequency value adjustable.
2000-07-14 05:53:31 +00:00
c32ffb8447
Make `physmem' an `unsigned int', so it can properly represent large memory
...
configurations.
2000-07-14 00:02:35 +00:00
5942ac860b
switch to sys/conf/newvers_stand.sh for generating vers.c
2000-07-13 22:25:14 +00:00
9c15bcabda
switch to sys/conf/newvers_stand.sh for generating vers.c
...
sync comments in */version with i386
2000-07-13 22:18:12 +00:00
f6330c6500
switch to sys/conf/newvers_stand.sh for generating vers.c
...
sync comments in */version with i386
add a hack to ${PROG} target so that symlinks machine, pmax, mips are
created properly even when building on NetBSD/pmax 1.4.1
2000-07-13 22:18:08 +00:00
1fa850b0ef
config file for Dreamcast
2000-07-13 18:11:53 +00:00
e527d66d55
Fix mem_no. Pointed out by cgd.
2000-07-13 18:10:38 +00:00
e633c4ca18
don't initialize BSC when BSC is already initialized (e.g. Dreamcast)
2000-07-13 18:02:10 +00:00
ca051b5fb3
fix some obvious paste errors in 'uk' cdev inits
2000-07-13 17:40:34 +00:00
9da8631e2b
printf() format for 64-bit integers `tf_pc' and `tf_npc'.
2000-07-13 16:44:03 +00:00
ef9531850e
Add comment that overriding the sysctl defines in machine/cpu.h
...
breaks userland binary compatiabiltiy between mips ports. Move
check down so common values are always defined here.
2000-07-13 07:37:11 +00:00
c0f74e1bda
remove memreg.h.
2000-07-13 06:30:16 +00:00
22820972ac
remove vaddrs.h
2000-07-13 06:25:55 +00:00
81ec8bef47
remove old (bogus) comment.
2000-07-13 06:23:07 +00:00
3eedcb3009
Whitespace police.
2000-07-13 05:47:39 +00:00
d5a1bec37e
bump some system values.
2000-07-13 05:40:51 +00:00
cb551c438d
Reflect the new reality.
2000-07-13 03:18:22 +00:00
841f05f1b2
Use <machine/asm.h>
2000-07-13 03:17:21 +00:00
20b3698aee
Include libkern.h
2000-07-13 03:13:40 +00:00
98ffc615b2
Use <machine/asm.h>. (e.g. prepare for ELF)
2000-07-13 03:13:05 +00:00
c0708e9ff1
Clean up bios_reg a little, and add support for accessing
...
the byte variants of the registers (e.g. %ah, %al, etc.).
2000-07-12 22:58:12 +00:00
7e8f67ad97
No need to fetch the psycho's own registers as thet are already passed
...
down from the parent bus. Also account for the difference in `reg'
properties in psycho vs sabre chips.
2000-07-12 21:49:44 +00:00
f56554a578
If there is no "interrupt-map" property on the ebus node, assume the
...
child "interrupt" properties are already in a format suitable for
the parent bus.
2000-07-12 21:07:36 +00:00
c8f528ad5e
switch to MI newvers_stand.sh version info generator
2000-07-12 21:05:35 +00:00
1204c1faaf
Oops, treat 2100A_A500 just like 2100_A500 in every place necessary.
2000-07-12 21:02:14 +00:00
3182af4432
- Add Jensen support/devices.
...
- Add commented-out Sable/Lynx support/devices.
- Switch from `ncr' to `siop' by default.
- Add some missing `scsibus' configs to INSTALL.
2000-07-12 20:54:38 +00:00
249773b538
Deal with another odd need of the Sable/Lynx systems, which need to
...
have an ISA chipset present before the PCI-EISA bridge has been
attached (because the STDIO module has an ISA DMA-using device,
the floppy controller, connected to it).
2000-07-12 20:50:00 +00:00
a66c3e663c
Code to support the DEC 2000/300 (DECpc AXP 150, a.k.a. "Jensen")
...
systems. Thanks to Gyenes Istvan for the rounds of testing.
2000-07-12 20:36:07 +00:00
55c41121ff
Change from `ncr' to `siop' by default.
2000-07-12 20:27:25 +00:00
42c89508c0
Uncomment the `fdc at sableio' lines.
2000-07-12 20:20:54 +00:00
1f45545899
Add UltraSPARC III specific flag bit. Currently ignored.
2000-07-11 21:55:11 +00:00
dc6054c8b0
add OBJCOPY?=objcopy
2000-07-11 18:47:09 +00:00
dafe13f724
callout()->callout_reset()
2000-07-11 18:46:22 +00:00
f6812b853b
Only define machdep sysctls if CPU_MAXID is not defined by machine/cpu.h.
...
This lets mips ports have additional machdep sysctl. Define CPUISMIPS3
for MIPS1+MIPS2 as cpu_arch >= 3 to support mips4. Add cpu_intr()
prototype so this is defined in one place.
2000-07-11 06:34:57 +00:00
6b28794054
Add support for 3 QED special2 opcodes.
2000-07-11 06:27:58 +00:00
54a85cb3af
For 64b clean 32b compilation, do not bother setting SX And KX.
...
The current code does not maintain these in SR, and they are not
needed by 32b kernel code for mips3/4 instructions.
2000-07-11 06:26:08 +00:00
4f051180a0
- Use PMAD-BA name for device match logic. It's not a real TURBOchannel
...
device and the id string is not found in option ROM string, but
ULTRIX/OSF1 call it so anyway.
- Squash IOASIC DMA buffer allocation into device attach() sequence.
2000-07-11 04:10:25 +00:00
77e30d85bf
Oops.
2000-07-11 01:15:47 +00:00
e3c19eafd0
Update comment.
2000-07-11 01:02:44 +00:00
dcbf69bf94
Update mips3_locore_vec cache functions for mips3_L1TwoWayCache. Add cast
...
for clean compilation with _MIPS_BSD_API_LP32_64CLEAN set.
2000-07-10 23:21:16 +00:00
f7d523ebb6
make buildable with -Wall -Werror
2000-07-10 22:48:25 +00:00
b3c2dd691c
make compilable with -Wall -Werror
2000-07-10 22:01:16 +00:00
42c88111e1
explicitly specify main() return type (make buildable with
...
-Wall -Werror)
2000-07-10 21:30:31 +00:00
010c198b37
In setregs() flush sigreturn trampoline code from the d (MIPS3) and i cache.
...
Tested on geocast RM5231 platform. This fixes a race in
regress/sys/kern/sigtramp. Some other ports do the same thing.
2000-07-10 21:12:13 +00:00
27a5ba9e0a
use <sys/exec_aout.h> instead of <a.out.h> - this is supposed
...
to be standalone after all
2000-07-10 20:36:15 +00:00
7e272173bd
no need to include <a.out.h> here
2000-07-10 20:33:49 +00:00
f10d7699fc
Break into debugger by typing `+++++',
2000-07-10 20:24:23 +00:00
e8ebb2a377
use mips3 cache op.
...
invalidate -> write-back invalidate
(although NetBSD/hpcmips run on write-through mode.)
suggested by cgd.
2000-07-10 16:23:18 +00:00
c71d0f69c6
Forgot a debug printf.
2000-07-10 10:45:21 +00:00
5ae755e1bf
Save registers for eventually later usage.
...
Use REI to clear pipes after code copy.
2000-07-10 10:42:27 +00:00
baec928850
NODESIZE -> BI_NODESIZE.
2000-07-10 10:40:38 +00:00
ed83213bf2
Add support for VAX 6000 + VAX 8000. Tweak console routines.
...
Create a fake RPB if either netbooted (on machine without RPB) or
loaded from console storage (without VMB intervention).
2000-07-10 10:38:23 +00:00
175e6ad859
Add code that allows the boot blocks to be loaded by VMB.EXE, and
...
also have optional MTPR printf available.
2000-07-10 09:55:36 +00:00
8658157274
Nexus vector number is 0x14-0x17, not 14-17! Fortunately, 3 wrong did
...
one right. Pointed out by Kenn Humborg (kenn@linux.ie ).
2000-07-10 09:14:32 +00:00
7403ef3d00
Need to include <sys/exec_elf.h> to make things happy. So much for adding
...
dead code.
2000-07-10 01:15:17 +00:00
048f1387db
Function signature for bus_intr_establish() changed.
2000-07-10 01:11:14 +00:00
1cfb5e6456
Grab and use the memory model info from the flags in the ELF header.
2000-07-09 22:39:17 +00:00
ec71379542
Use TSO memory model for 32-bit userland.
2000-07-09 22:02:32 +00:00
e5cd515b89
Upgrate interrupt handling:
...
1) use interrupt vectors for specific zs chips rather than polling
all of them.
2) use softintr_schedule() and schedule it for a particular device
rather than poll all devices.
2000-07-09 21:58:43 +00:00
f43ab74a43
Shuffle around some fields to waste less space on LP64.
2000-07-09 21:55:24 +00:00
406e0f779f
Add a `device class' interrupt level argument (from machine/intr.h)
...
to bus_interrupt_establish().
It's currently only used in sparc64/dev/psycho.c to assign a CPU interrupt
level to devices in PCI slots.
2000-07-09 20:57:41 +00:00
2a57393a0f
Re-arrange headers; drop <machine/cpu.h>.
2000-07-09 20:38:34 +00:00
230b3462ea
uncomment part which has been accidentaly commented out in last commit
2000-07-09 14:16:02 +00:00
f61c58e333
fix accidentaly dropped dependance on wrtvid
2000-07-09 14:11:10 +00:00
0b9b0cbc03
backout previous change, this should not have been committed (yet)
2000-07-09 14:07:06 +00:00
26e11b6af2
Make buildable on NetBSD/mvme68k 1.4.1.
2000-07-09 13:47:33 +00:00
152f5c5f28
remove unused variable.
2000-07-09 13:35:54 +00:00
f6cf4e5f93
move struct sys_config from mca_machdep.c to mca_machdep.h
...
fix copyright (overlooked in original commit)
use bitmask_snprintf() instead of printf("...%b") (though that part is commented
out anyway ATM)
2000-07-09 10:35:11 +00:00
1566e57da8
Simplify address decode logic for memory parity error condition.
...
XXX Need to have a better reporting message here.
2000-07-09 09:14:29 +00:00
3c55597b94
Add a patchwork prototype declaration for netintr().
2000-07-09 08:08:20 +00:00
194f2ce04e
Comment clarification in this file. Have consistent terminology, ATC
...
instead of TLB.
2000-07-09 07:14:18 +00:00
9ad7bd8d37
Increase the example DDB_HISTORY_SIZE.
2000-07-09 01:36:06 +00:00
33090b8b89
Enable DDB history.
2000-07-09 01:35:52 +00:00
4087b4e418
Do the interrupt fixup for all busses, not just bus 0.
...
This is necessary on some machines with multiple onboard PCI busses.
2000-07-09 00:42:47 +00:00
0ef0f52d06
Turn on DDB history by default.
2000-07-09 00:41:24 +00:00
5a7cb20576
gdb requires a `struct fpstate' so provide one.
2000-07-08 19:25:14 +00:00
eb1939c85f
printf format paranoia
2000-07-08 17:09:02 +00:00
26b0bc1c2e
printf format safety
2000-07-08 17:08:35 +00:00
6a6ee4aa91
cleanup way vers.c file is created/compiled
2000-07-08 15:40:53 +00:00
50dc07c081
get the version number differently - instead of using RCS version number
...
of version file, take version from last line of that file as the part from
start of the line to ':'
2000-07-08 15:36:05 +00:00
89ccc75157
use _C_LABEL() for bootversion, instead of hardcoding the reference as _bootversion
2000-07-08 14:41:04 +00:00
404e6e3a61
Drop KERNFS
2000-07-08 11:33:24 +00:00
fba6fe287b
* Redo previous; set PIR on 604 and 7400 only.
...
* printf clean-up.
2000-07-08 07:23:17 +00:00
065b56c096
backout part of previous: turn off intrdebug, and another debug message
2000-07-08 05:04:01 +00:00
7314c0eba6
Clear the reservation in __cpu_simple_lock_try even if it failed to lock.
...
(From ws@tools.de )
2000-07-08 04:36:56 +00:00
d770f87fef
Pullover rev 1.320 - rev 1.358 of GENERIC to IOPENER, and merge conflicts.
...
Add GENERIC rev in "from:" line to aid in future merging.
Major highlights include SOFTDEP, and, err, 4 blank lines.
2000-07-08 03:24:36 +00:00
71f3f1c282
Pullup rev 1.233 - rev 1.358 of GENERIC to CARDBUS, and merge conflicts.
...
Add GENERIC rev in "from:" line to aid future merging.
Major highlights include COMPAT_14, COMPAT_AOUT, NTFS, OVERLAY,
SOFTDEP, INET6, IPSEC, pcic iosiz changes, cz, dpt, rtk (cardbus!),
awi, cnw, ray, wi, xi, joy, and gif.
2000-07-08 02:47:02 +00:00
7fb0549d87
Add ep* at isapnp and ep* at isa.
...
3c509 works fine on my CATS.
2000-07-08 01:24:35 +00:00
2c1dc518bd
Changes for readability:
...
- #define LP64 dependent STACKFRAME macro once
- use a LOAD_ASCIZ macro for setting up the format string
for debug messages.
2000-07-07 23:28:28 +00:00
468c727a28
Temporary fix to prevent the clock from stopping on UIIi machines.
2000-07-07 19:59:36 +00:00
14b1b05f10
Rename GENERIC to GENERIC32 and GENERIC64 to GENERIC to allow snapshots to
...
build properly.
2000-07-07 19:11:56 +00:00
2b69bc2115
BUFCACHE=20
2000-07-07 14:22:57 +00:00
446c144ae3
Set PIR only if MULTIPROCESSOR is defined.
2000-07-07 13:22:06 +00:00
b91804af6c
split up debug flags so i can turn off some of them
2000-07-07 13:10:34 +00:00
cacf690261
Try both the BOOTPARAM and DHCP protocol (in that order as is the custom
...
with Sun machines).
2000-07-07 12:59:16 +00:00
4b21f66d57
work around a bug passing arguments to iommu_dvma_load_raw()
2000-07-07 12:53:29 +00:00
c0f4ea2a12
check that this *entry* is BUSCLASS_NONE (not the current device) in
...
bus_compatible(). fixes boot device detection on sbus. while i'm here,
sprinkle DPRINTF()s in the boot device detection code.
2000-07-07 12:44:47 +00:00
9a6c45e283
options BUFCACHE=20, plus a 64 bit config.
2000-07-07 08:44:16 +00:00
3f2289a3d7
Handle bus_dma aligment properly.
2000-07-07 02:50:19 +00:00
2c9058efbb
Oops, g/c some stuff from previous.
2000-07-06 23:29:13 +00:00
059d5818cf
include "opt_multiprocessor.h".
2000-07-06 23:27:29 +00:00
9ad1103d98
Make it compile with "options MULTIPROCESSOR".
2000-07-06 22:56:22 +00:00
65780061bd
Define some more CTB formats.
2000-07-06 22:46:54 +00:00
db5c144019
make sure ofwboot.xcf gets installed
2000-07-06 19:42:55 +00:00
089ed65ef7
Add NMI and XMI outcommented, the same with VAX 6400 and VAX 8000.
2000-07-06 18:04:56 +00:00
0e29b678ce
Add xmi_mainbus.c file.
2000-07-06 17:43:38 +00:00
63852b4193
Some defines for the 6000/400 CPU.
2000-07-06 17:42:49 +00:00
443db45277
Framework for the mainbus-XMI block. Not completely finished.
2000-07-06 17:41:37 +00:00
b98189c9f5
CPU support for the 6000/400 CPU. No support for spinning up the
...
slave processor yet, though.
2000-07-06 17:40:00 +00:00
d5e70ee279
Add code to support loading of kernel directly via MOP.
...
This is only intended for development purposes, not production use.
2000-07-06 17:37:40 +00:00
6bf625c8c0
Recognise VAX 6000/400.
2000-07-06 17:36:22 +00:00
5c50116697
Console Communication Area (CCA) layout description.
...
Used on for example VAX 6000 machines.
2000-07-06 17:34:29 +00:00
6a1f10a7d5
Added two new options to the bootblock: -V turns on verbose mode and -D
...
makes it load but not execute. If fcode-debug? is enabled in the firmware
an arbitrary file can then be loaded with:
ok " <path>" do-boot
2000-07-06 17:15:07 +00:00
63d57aa16a
Fixup counter-timer interrupt lossage.
2000-07-06 14:13:05 +00:00
7f0eba7ad8
make spllower() return void.
2000-07-06 04:31:04 +00:00
212a0a08d2
Implement powerpc spin lock functions.
2000-07-06 03:52:25 +00:00
c4f2dfb0b9
Enable "old partition ID" compatibility by default, just as in biosboot.
2000-07-06 03:39:53 +00:00
4c19b21f72
3c503 works on alpha, add:
...
ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
2000-07-05 18:40:47 +00:00
417c4e6dc1
include GENERIC, instead of defining all the options and devices.
2000-07-05 16:19:48 +00:00
f67a6a75d2
More reduce size.
2000-07-05 16:18:02 +00:00
73db3f2b79
First attempt to spin up the secondary processor on 180MP and 200MP.
...
XXX Need more work.
2000-07-05 16:02:38 +00:00
f6d8b8e963
We want to index the PCI `interrupt clear' registers with the Interrupt
...
Number Offset. (this stuff needs a serious cleanup).
2000-07-05 12:11:59 +00:00
c019fa32ca
Revert a bit of the last change to make this compile again.
2000-07-05 07:33:52 +00:00
bd29eb7984
regenerate
2000-07-05 04:10:15 +00:00
502fc00210
Comment out EON ISO-over-ip tunneling pseudo-driver, and document as
...
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.
2000-07-05 04:07:22 +00:00
7b6a572aae
zs_ioasic external declarations are stored in zs_ioasicvar.h.
2000-07-05 03:06:53 +00:00
534c33a095
Use dev/tc/ directory for DEC3000 Z85C30s.
2000-07-05 02:50:39 +00:00
728e424e54
Repopulate 4 files, zs_ioasic.c and zs_ioasicvar.h from arch/alpha/tc,
...
zskbd.c and zsms.c from dev/dec/, respectively. No functionality
change this time.
2000-07-05 02:48:50 +00:00
b513be4daa
s/#include/include/
2000-07-04 22:25:06 +00:00
0cc7c0e470
Report spurious VME interrupts only #ifdef DEBUG for now. The i82586
...
based `ie1' board seems to cause this for no apparent reason.
2000-07-04 22:22:56 +00:00
87803a8f14
amigappc: siop -> asiop
2000-07-04 14:18:06 +00:00
3214045e75
GC dead code.
2000-07-04 14:05:34 +00:00
3cffbb811c
Pass correct argument to the console channel close routine.
2000-07-04 13:57:40 +00:00
fe19ad9450
struct db_variable has changed. Change db_spec_regs prototype and make
...
this compile again.
2000-07-04 06:23:49 +00:00
168faa04b6
Oops.. Forgot to grow chrtoblktb[]. Pointed out by tsubai.
2000-07-04 05:48:36 +00:00
4dcd114ad5
Unnecessary to include <dev/tc/tcreg.h>.
2000-07-04 02:37:51 +00:00
1de4ec68b4
Repopulate TCDS dual channel SCSI adapter to MI dev/tc, squashing
...
internals for better layering between TCDS DMA ASIC and ASC SCSI
controller.
2000-07-04 02:22:08 +00:00
93f987a210
The `si' driver has been transformed into an MI VME frontend.
2000-07-03 23:30:33 +00:00
8fbc28d991
Revert WEAK_ALIAS back to ELF only.
...
Change ALTENTRY so there is no change of alignment or section
2000-07-03 23:05:32 +00:00
7878bcc14c
Don't bother with minor printing, except on the LCA CPUs (because
...
that tells us if we have a 21066 or 21068).
2000-07-03 21:21:26 +00:00
047b6f9582
* Remove MAX_DMA_LEN & si_minphys().
...
* Disable the DMA engine when setting up a DMA transfer, just in case
the 5380 driver didn't instruct us to do so already.
* More useful debug output when entering the "left-over bytes" case after
a DMA transfer finishes.
2000-07-03 20:55:12 +00:00
968524445a
Prevent interrupts from being posted if they are active and deprecate polled
...
interrupts. This seems to eliminate the spurious interrupts.
2000-07-03 17:56:06 +00:00
10e6c623b3
Print the system serial number.
2000-07-03 17:52:33 +00:00
58c36586cd
Use the same IPLs as everyone else.
2000-07-03 17:42:37 +00:00
16fd30ec1d
- add a bus class check to the conversion of prom names to NetBSD driver
...
names, as we need to convert `pci' to both `psycho' and `simba'. add
a member to dev_compat_table[] for this, using BUSCLASS_NONE for when
we don't care (all other cases, currently). add `ide' -> `pciide' and
`disk' -> `wd' mappings here, also.
- "psycho" is a BUSCLASS_MAINBUS device; it has UPA attachment semantics.
this fixes bootpath detection for IDE disks.
2000-07-03 14:38:05 +00:00
df788ce137
A few tweaks. Still not a real driver.
2000-07-03 12:50:09 +00:00
d08e3b12a4
Stabilize ADB support for some non-Apple ADB peripherals. This is the
...
second (and final) part of the fix for PR 10086. (There are no longer
any infinite-wait busy loops in the ADB driver!)
2000-07-03 08:59:26 +00:00
4f1fa84a93
Rework ALTENTRY a bit.
2000-07-03 04:24:56 +00:00
959b8d8a1e
Make cross-compile friendly
2000-07-03 04:24:12 +00:00
88067a43e3
Build a boot_big.net (based at 700000) in addition to boot.net,
...
allowing you to netboot a kernel with a ramdisk inside on systems
where memory is laid out to allow this.
2000-07-03 02:04:02 +00:00
01bd2a3496
The `rpb_phys_address_size' field is really 2 32-bit fields,
...
`rpb_phys_address_size' and `rpb_extended_va_size', per Brown Book.
2000-07-03 01:47:48 +00:00
01d5ad3ab6
White-space improvements.
2000-07-03 01:17:35 +00:00
2310f6d755
Add `ahc' (Adaptec 2940, et.al. SCSI controller); it is known to work.
2000-07-02 21:11:26 +00:00
da62d2ef12
Avoid attaching on the Mac TV, as this system seems to not be
...
completely backward compatible to the II-series sound hardware.
2000-07-02 21:10:14 +00:00
56cc62bbec
Return the full width of the counter here.
2000-07-02 21:05:14 +00:00
95497e28ce
Add video hardware info for the Performa 550 and Macintosh TV.
2000-07-02 20:59:58 +00:00
f504adf782
Clean up interrupt handling some more.
2000-07-02 16:13:21 +00:00
f3e6e48cb8
update to reality:
...
- TRAPWIN is defined in locore.s
- don't config netbsd_wd0
- enable MSDOSFS and FFS_IE
- enable INET6 & IPSEC*
- enable ipfilter
- comment sbus & zs at sbus
- enable scsi devices seeing we have scsi bus support
- hardwire the onboard hme as 'hme0'
- disable audiocs for now
- disable rnd for now
2000-07-02 15:02:29 +00:00
585f7645bf
iommu_dvmamap_load*(), pass an alignment constraint, as well as
...
EX_BOUNDZERO, to extent_alloc(). this fixes problems with it
(extent_alloc()) returning incorrect values, when the start of
the extent is not aligned as strongly as the requested area..
raw access to ide disks now works.
2000-07-02 14:00:38 +00:00
15c79c03c2
use bitmask_snprintf().
2000-07-02 13:35:35 +00:00
9ec4bcf95b
whoops; turn off trapdebug again.
2000-07-02 12:39:01 +00:00
45b6ec5476
Experimental APM compatible power management.
2000-07-02 10:01:30 +00:00
0b9c36b715
undef PS after inclusion of net/netisr.h to avoid conflict w/ machine/reg.h
2000-07-02 05:43:43 +00:00
a5c13f9ad4
Kwality control:
...
* put #includes of opt headers and headers to get protos used by
net/netisr_dispatch.h in net/netisr.h (if !defined(_LOCORE)) (rather than
in netisr_dispatch.h itself, and potentially nowhere, respectively).
* require netisr.h to be included before netisr_dispatch.h.
* minor additional cleanup of both netisr.h and netisr_dispatch.h.
* clean up uses to remove now-unnecessary header file inclusions, and
local prototypes of the fns.
* convert netisr dispatch implementations which didn't use
netisr_dispatch.h (pc532) to use it.
2000-07-02 04:40:33 +00:00
87ca5edd6f
Include all the files necessary to prototype all the network soft interrupts.
2000-07-01 21:52:05 +00:00
cbb53d3ebd
Add audio, midi, and sequencer devices. Copied from ports alpha and i386.
...
Note: this does not mean internal audio's working. :-( It means I'm trying
to get my eap card to work.
2000-07-01 21:25:11 +00:00
27eeb4183b
Uncomment lots of stuff. This _is_ a GENERIC kernel, after all.
2000-07-01 17:38:07 +00:00
86e199a889
Actually check which netisrs are needed rather than running them all.
...
(oops)
2000-07-01 17:33:55 +00:00
c9e87920af
GCC 2.96 wants the = constraint first. Older gcc(s) don't care.
2000-07-01 06:43:42 +00:00
5ccb0f3e95
Add ELF support.
2000-07-01 06:42:54 +00:00
c9e3b4a94f
a.out allow weak symbols too.
2000-07-01 06:42:06 +00:00
e9b3d6fc85
GCC 2.96 wants the = constraint first. Also change to be a bit more
...
efficient. Instead of using indirect register access, change the
constraint to memory and use the value directly. This allow PC-rel
access among other things.
2000-07-01 06:41:06 +00:00
54a2dbe16a
More GCC 2.96 changes.
2000-07-01 06:38:53 +00:00
e6b451c8a6
fix wrong comment.
2000-07-01 03:35:07 +00:00
556a964467
<vm/vm.h> -> <uvm/uvm_extern.h> changes i forgot to commit
2000-07-01 03:34:05 +00:00
707e41f21e
Fix interrupt delivery on UltraSPARC IIi machines.
2000-06-30 22:58:01 +00:00
3250ce2976
Reserve a page for dumping the kernel.
2000-06-30 22:17:53 +00:00
edf0a0d67e
Pass the abst to alpha_pci_mem_unmap() so that the real size of the
...
mapped area can be unmapped.
2000-06-30 18:19:28 +00:00
d738f90fd7
raise MSIZE from 128 to 256.
...
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)
portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.
2000-06-30 17:55:11 +00:00
d76ae83df8
add PULLDOWN_TEST for all the platforms.
...
XXX should be moved to somewhere else when stabilized
2000-06-30 17:10:15 +00:00
8231e1afca
fix typo
2000-06-30 03:35:32 +00:00
0d7f238097
no more vm includes
2000-06-30 00:00:26 +00:00
ff9280f4ee
This seems to fix the problem in __semctl13.c without breaking anyghing else.
2000-06-29 20:15:24 +00:00
51909a9fd4
Changed my mind about these..
2000-06-29 15:48:13 +00:00
41ba2b7c48
Move a few things from ip32.c.
2000-06-29 15:44:10 +00:00
eaa7fc4ca8
Add spllpt. More interrupt changes needed..
2000-06-29 15:36:48 +00:00
9a05dad1da
zs can be used on several busses, so define it here.
2000-06-29 15:20:27 +00:00
9beea749f1
Hack: disable R5K L2 cache for now, pending (working) changed cache ops.
2000-06-29 15:18:41 +00:00
008a325614
Just a stub. Needs different register accesses than other 8-bit MACE
...
deviecs..
2000-06-29 15:16:17 +00:00
221de2dffb
Minimal locore_machdep.S.
2000-06-29 15:10:44 +00:00
079ce66c6d
Uncomment HPC inclusion for now.
2000-06-29 15:10:14 +00:00
8906c1b836
Fix bus_space_read_region_{2,4,8}().
2000-06-29 14:10:16 +00:00
b7e36aabb5
When winding down a DMA transfer, don't complain about the actual
...
transfer count being smaller than the minimum transfer size for which
we would use DMA. The device may be disconnecting, to complete the
transaction at a later time. Just let the 5380 engine proceed acting
on the current SCSI bus phase.
2000-06-29 14:06:40 +00:00
853a455109
enable SOFTDEP.
2000-06-29 11:42:30 +00:00
80bb8049ba
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 09:02:51 +00:00
c88e94a407
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 08:58:45 +00:00
b564830503
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 08:44:03 +00:00
47ef8ee92b
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 08:32:34 +00:00
ca5133d3fb
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 08:22:17 +00:00
7bf55b1ed1
remove include of <vm/vm.h>.
2000-06-29 08:19:21 +00:00
28d898391b
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 08:10:45 +00:00
471e57ff1e
remove include of <vm/vm.h>.
2000-06-29 08:07:48 +00:00
4fa952b49a
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 07:58:50 +00:00
fa00dc597a
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 07:44:02 +00:00
8daa58f52b
remove include of <vm/vm.h> and <machine/pmap.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 07:40:05 +00:00
4f253c9e18
When mapping non-cacheable memory with bus_space_map, make sure we use the
...
precise (serialized) way.
2000-06-29 07:40:04 +00:00
4d14e81c0b
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 07:37:53 +00:00
ffa869113a
Get 060 CacheCopyBack support in line with the amiga (and working ;-)
2000-06-29 07:36:16 +00:00
9c11d316b4
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 07:18:57 +00:00
7e590c46fe
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 07:07:52 +00:00
7e975cacbe
un-__P, clean up spacing a little bit, put fwd struct decl(s) near top
...
rather than embedded. no functional changes.
2000-06-29 06:00:43 +00:00
ragge