9baf1fff99
NEC RISCserver 2200 support by bob meader <bob@cci.net>.
...
Now NetBSD works with RISCserver 2200.
2000-08-03 23:58:23 +00:00
b3e0af3d32
Fix a problem uncovered by rev 1.5 of pcibios.c:
...
Avoid interpreting the upper 32 bits of 64-bit BARs as a 32-bit BAR.
Otherwise, the code would assume that the value 0 was incorrect and either:
(a) [on bus 0] "fix up" the address to some nonzero value, thus placing
the decoded address range outside of 32-bit address space, or
(b) [elsewhere] completely disable the device.
The fact that this behaviour depends on the bus number of the device is
already XXX'd.
XXX: This will need revisiting if and when we ever want to handle a PCI bus
XXX: with more than 32 bits of address space on an i386.
The onboard Adaptec 7890 on my Dell Precision Workstation 410 works again.
2000-08-03 20:10:45 +00:00
dd5c54d05c
Add fpu emulation instrumentation and fixup FCMP and FCMPE emulation for v9.
...
And rename the 128-bit `x' routines to `q' to match v9 terminology:
i - 32-bit int
x - 64-bit int
s - 32-bit fp
d - 64-bit fp
q - 128-bit fp
2000-08-03 18:32:07 +00:00
ac06675f56
add COMPAT_14
2000-08-03 11:30:30 +00:00
9b50348e47
set internal register correctly (SH4)
2000-08-03 08:19:26 +00:00
e8b50cf289
Use the same idiom for iterating over allproc as everywhere else in the kernel.
2000-08-02 22:47:44 +00:00
7abe1d5edf
Garbage collection.
2000-08-02 22:26:35 +00:00
345d748512
PDB_BOOT and PDB_BOOT1 should not be the same value.
2000-08-02 22:25:45 +00:00
7ec33e899f
Get kernel profiling to work. Now if only gprof worked....
2000-08-02 22:24:38 +00:00
81b49011ff
uvm_inherit.h was removed, and doesn't seem to be needed here.
2000-08-02 15:24:40 +00:00
cf62d07e82
Fix bug that trashed the SPT if any copy* function were used before
...
the first swtch().
2000-08-02 12:13:22 +00:00
e049977033
check _BYTE_ORDER instead of BYTE_ORDER
2000-08-02 11:32:41 +00:00
2c691df1ec
uvm/uvm_inherit.h was removed.
2000-08-02 09:06:56 +00:00
eef346a5ec
Don't try to change subordinate bus number if pchb != grackle (for now).
2000-08-02 09:02:46 +00:00
d6945520db
Use cpu_intr() definition from mips/cpu.h instead of local one
...
like other mips ports.
2000-08-02 08:57:15 +00:00
8d300a3b14
setregs() cache sync turns out not to be needed with kern_exec 1.104
...
(which was 2 weeks after our internal trees full sync).
2000-08-02 06:46:47 +00:00
0cbe0d600f
fix oversight introduced in previous my commmitment (revision 1.4),
...
pointed out by Michael Shalayeff <mickey@openbsd.org>.
2000-08-02 02:54:41 +00:00
dfe3516515
Include NONPLUS and just set the extras we need for 64-bit kernels.
2000-08-02 02:23:58 +00:00
e1cf55c8a8
Make mips3_FlushICache() convert a0 into a KSEG0 + virtual index like
...
the _2way and mips3_FlushDCache(). This lets all mips3 cache ops accept
user virtual addresss w/o a tlb miss. Since this is now done in both
ICache flush routines, no need to do it in pmap.c. Fixed R4400
stability problems with setregs() cache flushing.
2000-08-01 23:38:26 +00:00
e6bdec31fd
Fix vmapbuf() to call uvm_km_valloc_perfer_wait() call, but trunc_page()
...
to the prefer arg so we free the correct page.
2000-08-01 22:45:05 +00:00
a8cd48f9e6
`mem' is now a pointer, not an array. Fixes kernel coredumps.
2000-08-01 16:49:47 +00:00
8d6c85d001
Remove hack for unswapped read/write_multi in swapped space.
...
Driver now uses read/write_multi_stream_2.
2000-08-01 13:08:39 +00:00
43b5c0039c
Enable rnd.
2000-08-01 08:23:37 +00:00
37ae63598b
Add midi at clcs.
2000-08-01 08:16:54 +00:00
ae581ace81
reserve AGP space to avoid resource conflict.
2000-08-01 05:23:59 +00:00
57d2ec0b98
Overhaul cache flush code and coredump code.
2000-08-01 00:40:15 +00:00
568dca001c
Cleanup trapstate handling and garbage collect old stuff.
2000-08-01 00:36:05 +00:00
e5a87444c7
Cleanup trapframe and TSTATE handling.
2000-08-01 00:34:13 +00:00
6f9bfddd60
Add UVM_PAGEIDLE_ZERO.
2000-08-01 00:31:15 +00:00
cacbbd1117
Garbage collection.
2000-08-01 00:28:55 +00:00
d09c8ea0f1
Revamp cache flush routines.
2000-08-01 00:28:02 +00:00
07fc19421d
Pull in <machine/frame.h> to define BIAS and CC64FSZ.
2000-08-01 00:25:02 +00:00
aeb88321db
Call the parent bus dvmamap_unload function to clear the cache rather
...
than do it ourselves.
2000-08-01 00:22:41 +00:00
3094e3b89d
include <sys/types.h> to define u_int.
2000-07-31 23:40:02 +00:00
3f1e17a340
Define bus_space_*_stream_N functions as their non-stream counterparts.
2000-07-31 22:43:46 +00:00
3ce3697584
Add bus_space_*_stream_N functions.
2000-07-31 22:40:25 +00:00
bd823b939e
Fix code to read a string from the nubus board--it was not terminating
...
the string properly when the string on the board is longer than the
pre-allocated space.
2000-07-31 22:39:17 +00:00
ede765839e
Look for fpu files in the sparc subdirectory where they now reside.
2000-07-31 22:17:05 +00:00
9c331f1f89
use 'makeoptions LDSCRIPTBASE="sh.x"' (or shl.x) to select ldscript file
2000-07-31 20:57:45 +00:00
2cc07c0541
Add a DIAGNOSTIC panic if (count-using) bus_space macros are called with
...
a count of zero. Some drivers do this accidentally and some bus_space
implementations will fail if count is passed as zero (they are set up in
a do-{}-while structure).
2000-07-31 14:59:15 +00:00
978acd5367
sync with GENERIC32; enable rnd
2000-07-31 13:21:45 +00:00
ec14782383
hardcode onboard "hme" to "hme0"
2000-07-31 13:16:24 +00:00
b5ce82b4a0
define BDPRINTF in the !DEBUG case to nothing. PR#10688.
2000-07-31 05:40:22 +00:00
3717acff97
We may wish to install from an SMC-based ethernet, too.
2000-07-31 02:06:48 +00:00
f5882c7ffa
Make sure that bus_space read/write functions that take a count will not be
...
called if count is zero. The smc91cxx driver, for example, may try to call
bus_space_write_multi_2() with a count of 0.
2000-07-30 23:17:23 +00:00
2f76646af1
Some uncommitted poking around. No functional change.
2000-07-30 21:48:54 +00:00
1e909ae3ca
Add SMC-based ethernet and nsphy (AsanteFAST) and ukphy (just in case).
2000-07-30 21:46:39 +00:00
e74ae8ee59
M.d. glue for nubus SMC 91cxx-based cards--including Focus Interlan and
...
AsanteFAST.
2000-07-30 21:43:40 +00:00
fb9995989b
Make bus_space_write_region_2 usage match prototype.
2000-07-30 21:41:59 +00:00
d13747524c
Fixup for bogus assumptions about bus_space_handle_t.
2000-07-30 21:40:49 +00:00
c131e0d1b7
Remove unsupported Focus hardware--this is now probed in if_sm_nubus.
2000-07-30 21:40:09 +00:00
2bb296de77
Update hack to point to bus_space_handle base address.
2000-07-30 21:39:16 +00:00
9c85d4dc6a
Add byte-swap and stride options to bus_space. Allocate as normal, then
...
call mac68k_bus_space_handle_swapped() or mac68k_bus_space_handle_set_stride().
Stride is untested. Swapped code works for SMC ethernet.
2000-07-30 21:38:02 +00:00
a3f6fd2274
Add nubus attachment for smc91cxx driver.
2000-07-30 21:36:04 +00:00
77a537a1ba
Use M_SOFTINTR for soft interrupt sructures
2000-07-30 16:39:18 +00:00
537da4726d
Refresh screen when the system resume.
2000-07-30 11:16:54 +00:00
5f1e746912
Remove duplicated entry 22 in chrtoblk table.
...
Pointed out by Greg Kritsch on port-macppc mailing list.
2000-07-30 07:17:27 +00:00
1483e8c25e
Fix "suggest parentheses around assignment ..." warning in normally
...
unused code segment.
2000-07-30 06:11:38 +00:00
b5e3ec56a8
Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.)
2000-07-30 04:41:15 +00:00
bb1a798cbe
Move from sys/dev/apm. And rename apm -> apmdev.
2000-07-30 04:29:22 +00:00
d760e0b407
Add code to read the EISA configuration NVRAM as set up by
...
an EISA Configuration Utility. Code to access this data
is forthcoming.
XXX This could probably be made MI at some point.
2000-07-29 23:18:46 +00:00
e25636b5da
g/c RB_DFLTROOT
...
I've tried hard to find also various usage() messages and remove the
appropriate flag from there as well, hopefully all occurences are covered.
2000-07-29 20:06:27 +00:00
25e447156e
Fix printf format string. (recently SECDAY changed from unsigned long to int)
2000-07-29 11:11:53 +00:00
f23a2f015d
Set hostid.
2000-07-29 08:21:43 +00:00
44c9e5e16e
Really make this work for `dependall'. Also strip bootst.bug before
...
running it through wrtvid.
2000-07-28 20:08:20 +00:00
fe3f6176b4
Make 64-bit stack traces look prettier.
2000-07-28 19:10:33 +00:00
652a74ef51
Don't dump if there's no address space reserved for it.
2000-07-28 19:08:25 +00:00
0505a9e28a
Eliminate the other %:, using vsnprintf followed by printf.
2000-07-28 15:40:24 +00:00
85ae8ebac7
Prototype netintr().
2000-07-28 14:58:01 +00:00
ce9fd05593
Avoid a nonstandard %: format: printf("%:", fmt, ap) -> vprintf(fmt, ap)
2000-07-28 14:46:37 +00:00
4d52022987
Comment tidying
2000-07-28 09:54:56 +00:00
61edac627c
Convert the arm26 rtc driver to use pk's new todr(9) interface internally.
...
Nothing outside the driver will notice until we get proper MI I^2C.
2000-07-27 23:51:43 +00:00
379de37900
Make these work for the `dependall' target.
2000-07-27 21:06:53 +00:00
4a353b5330
Moving to a default of 64 PTYs.
2000-07-27 17:53:35 +00:00
b63ed164a1
convert PRID handling to use macros on an int, not bit-fields.
...
there's no reason to use bit-fields, and they just complexity to
the header.
2000-07-27 17:29:05 +00:00
0d5db1f645
Bump DFLDSIZ to 32MB since 16MB is no longer enough for some
...
parts of `make build'.
2000-07-27 14:48:58 +00:00
256fc99a68
include the 32-bit kernel, not myself
2000-07-27 14:39:50 +00:00
8b5a1a1dea
do the 32 bit / 64 bit name swap, as per GENERIC.
2000-07-27 14:38:45 +00:00
cc41b6af8f
remove COMPAT_AOUT option.
2000-07-27 14:34:06 +00:00
8f4e16a29e
G/C some obsolete HP-UX related flags, and prevent multiple
...
inclusion while I'm here.
2000-07-27 14:26:15 +00:00
110b948408
G/C MDP_HPUXTRACE since it is never set anywhere, so we don't actually
...
support HP-UX processes doing the tracing.
2000-07-27 14:25:14 +00:00
a254dae933
ebus sc_is is a pointer now, already.
2000-07-27 14:17:10 +00:00
dea4c479f5
intr_list_handler() should only take one argument. it ignored the 2nd anyway.
2000-07-27 14:13:50 +00:00
556a915306
add commented LOCKDEBUG
2000-07-27 14:10:25 +00:00
2726e45533
fix warnings.
2000-07-27 13:59:26 +00:00
270fd5cc55
delete unused variable.
2000-07-27 13:58:54 +00:00
eafc0ade2d
fix warnings.
2000-07-27 13:57:23 +00:00
926ed939b6
Fix grammatical error in panic msg
2000-07-27 10:12:31 +00:00
3eae1609f1
Fix to actually compile MIPS1 only.
2000-07-27 08:28:36 +00:00
e4a0934c13
Do not attempt mips3 style cache flush on mips1 in setregs() as it
...
is illegal to flush on user addresses. In theory the race exists
on MIPS1, but it is rather unlikely in common use. I have
seen it with regress/sys/kern/sigtramp on a QED 5231 system.
2000-07-27 06:28:06 +00:00
4adc7b9704
add nops after jals in PANIC and PRINTF. (these macros are often used in
...
code which has noreorder set, and they're not used with nops afterwards,
as is appropriate in that case, so put the nops in the macros.)
2000-07-27 05:01:06 +00:00
63466a9699
Un __P.
2000-07-26 21:50:48 +00:00
2079f86890
On-board devices on psycho machines seem to have the `interrupt' property
...
in the parent bus format (i.e. an INO) rather than being represented as
an PCI interrupt line. Provide a hack to work around this in pci_attach_hook().
2000-07-26 17:46:56 +00:00
ca2a49c4cf
Back-out vmapbuf() change for now as locally it has been found to sleep
...
in some circumstances that don't sleep when not using pmap_prefer().
2000-07-26 16:24:38 +00:00
1d79c50d61
Oops, forgot a debug return.
2000-07-26 15:16:55 +00:00
e668bc0310
Use the mk48txx driver for time-of-day clock access.
2000-07-26 13:39:36 +00:00
785d8d91b9
Remove unused <sys/dev/ic/intersil7170.h>
...
Remove unused `extern struct idprom idprom'
Pull in <dev/clock_subr.h>
2000-07-26 12:39:20 +00:00
97c8ae87cd
nmi files.
2000-07-26 12:37:14 +00:00
f9374fe05f
Add bi interrupt allocator. Should be somewhere else.
2000-07-26 11:55:55 +00:00
e50ddafc0b
Add badaddr() field.
2000-07-26 11:55:01 +00:00
550bb5fbb2
Make yeartonum/numtoyear visible.
2000-07-26 11:54:32 +00:00
c034e1d483
VAX-specific bi support changes.
2000-07-26 11:53:30 +00:00
9c3b3ed9c6
Discover the KA88 cpu.
2000-07-26 11:50:51 +00:00
3a73106b1b
KA88 console support.
2000-07-26 11:50:16 +00:00
0aeb2853f9
Support for a machine-specific badaddr handler.
2000-07-26 11:48:50 +00:00
b38b1995fa
Support for the KA88 CPU and the NMI backplane.
2000-07-26 11:47:15 +00:00
851da6dda0
Remove the use of global "mastercpu", the world is different now.
2000-07-26 11:44:25 +00:00
001420d7ea
Remove unneeded include.
2000-07-26 11:42:41 +00:00
4a3cba7a65
Pull in <dev/clock_subr.h>.
2000-07-26 11:28:36 +00:00
5d162e9bcf
Add Sigma Designs L-View and AsanteFAST product codes.
2000-07-26 04:36:16 +00:00
98cdbc4cc9
Remove advertising clause with my name.
2000-07-26 04:35:46 +00:00
11142830f9
Switch back to newvers_stand.sh. Dunno why it bombed the first time.
2000-07-25 21:53:55 +00:00
f343e5777c
Add `dma' to the `early device' list, since we need it before an `esp'
...
is configured. Traced and tested by Julian Coleman.
2000-07-25 21:50:03 +00:00
2f335ce72b
Nuke __BROKEN_DK_ESTABLISH, and add __HAVE_DEVICE_REGISTER.
2000-07-25 20:52:27 +00:00
714a495a4a
Duh, hp300 -> sparc64.
2000-07-25 20:48:19 +00:00
234b20f27c
Put back missing newvers.sh.
2000-07-25 20:47:44 +00:00
71538e8894
Fix mips3 outofworld to panic cleanly even if shutdown path misses K2.
...
Previously we jal to panic which never cleared the tlb fault, so if
on the course of shutdown (like a doshutdownhooks() callback) missed
K2, it would panic again. Fix by setting EPC to panic() and eret.
2000-07-25 18:06:49 +00:00
3a90817270
Add option to apply additional mask to the SR at run-time for MIPS3 platforms.
...
By default this is off, and only slightly changes the code to load SR when
a temp register is available. This can be used by the platform code to
handle slow to clear interrupts (our case) or to mask off any interrupt
any interrupt at run-time. This can be very useful for embedded platforms
that have less than desirable interrupt properties.
2000-07-25 17:56:05 +00:00
219910d2e6
add disabled LOCKDEBUG; re-enable all the phy drivers
2000-07-25 17:26:36 +00:00
320361c474
Re-instate a couple of delay slot NOPs marked `XXX spitfire bug?'
2000-07-25 15:15:32 +00:00
6c80daae8d
Ignore all undefined bits in the Tadpole microcontroller status register.
...
Only the low nibble is defined, and on at least one 3gx (mine) there is an
undefined bit which reads as a one -- bit 6 (0x40). This screwed tctrl_intr()
which would loop forever, thinking it always had new events to process.
2000-07-25 09:57:59 +00:00
46ab3e89fb
Use libsa alloc().
2000-07-25 06:26:18 +00:00
dd54c272e5
Add ofwboot.{mrg,xcf} to CLEANFILES.
2000-07-25 06:22:05 +00:00
8dc7633036
Make this compile again.
2000-07-25 06:18:23 +00:00
13f68a994d
Enable console in initppc().
2000-07-25 05:44:27 +00:00
7cf89e2181
Allocate temporary buffer to copy OF page table dynamically
...
rather than static variable.
2000-07-25 05:41:30 +00:00
e651decb55
We don't need to include the # VIA VT82C686A integrated AC'97 Audio as it
...
is integrated into the Southbridge on a number of i386 motherboards - we
won't be seeing that in a mac. :-)
2000-07-25 02:33:30 +00:00
a6d6bce652
Add a bunch of pci audio drivers. Most are commented out as they haven't
...
been tested on macppc. But I tested the eap for playback and it's fine.
2000-07-25 01:39:22 +00:00
05587c68ae
Correct typo in comment.
2000-07-25 00:11:36 +00:00
747fe6b40d
French/Finnish/German/Norwegian keyboard support; ported by Thomas Runge from the i386 pccons.c. Minus the iso8859-1 to pc437 translation which isn't needed on the DNARD.
2000-07-24 22:05:27 +00:00
ee0e9a4283
French/Finnish/German/Norwegian keyboard support; ported by Thomas Runge
...
from the i386 pccons.c. Minus the iso8859-1 to pc437 translation which
isn't needed on the DNARD.
2000-07-24 21:56:09 +00:00
7dad7ceb84
Use new uvm_km_valloc_prefer_wait() in vmapbuf(). This lets the K2
...
mapping of b_data have the same virtual index, so the mapping does
not degenerate into uncached in pmap_enter().
2000-07-24 20:16:29 +00:00
0cd22457c9
add netboot.bin to CLEANFILES
2000-07-24 18:43:16 +00:00
921705c3eb
cleanup Makefiles, put common stuff to Makefile.booters, ditch unnecessary
...
stuff
make this all compile with -Wall -Wno-main -Wmissing-prototypes
-Wstrict-prototypes -Werror , also compilable on 1.4.1
label itself as NetBSD/mvme68k instead of "BSD" in bootblock message
move bugcrt.c to libbug, remove bugcrt directory (bugcrt is still built
and used separately to rest of libbug)
convert sboot to use ordinary mvme68 libsa, instead of copying needed
stuff in libc_sa.c
convert to use version info generated by sys/conf/newvers_stand.sh
instead of previous version.c files, add necessary 'version' files
put chiptotime() to separate libsa file (used also by sboot/clock.c)
Thanks to Steve Woodford for help with this. Note that -current build
might be hosed by this change, will be addressed by Steve shortly.
2000-07-24 18:39:01 +00:00
b77782d785
Optimization to pmap_zero_page(): we only need to use the first 16 FP regs,
...
as in bzero().
2000-07-24 16:21:02 +00:00
fe9795a1e5
Fix a whitespace glitch.
2000-07-24 16:08:18 +00:00
a0ae8e1ecb
Pull in the bzero() changes from libc for real, with a couple of kernel-
...
specific hacks:
* Make the bias handling depend on STKB, so it switches correctly for 32-bit
kernels.
* Use the 32-bit stw/ld for 32-bit kernels.
* Add a few `-STKB's that were missed in the previous change.
2000-07-24 15:57:07 +00:00
751028f9c1
CopyToBuffer/CopyFromBuffer are used by sii/xsii and nothing else.
2000-07-24 15:07:02 +00:00
98127a7ee3
Cosmetic & readability:
...
- local label cleanup in interrupt handling code;
- in debugging sections when testing `intrdebug': use a unique
local label (97) to enhanced clarity;
- comment-out unused code;
- kill a bug as the satisfying result of doing all of the above.
2000-07-24 14:55:56 +00:00
f054f5b190
Allow probe for SCSI tape drives even if no SCSI disk drives are configured.
2000-07-24 11:44:33 +00:00
78abb015f5
G/C the IIO* #defines. They're no longer needed.
2000-07-24 11:20:47 +00:00
a943e81da4
Delete kernfs.
2000-07-24 10:04:10 +00:00
2688608c2b
Pass the boot partition number into the loaded kernel, in preparation
...
for doing away with __BROKEN_DK_ESTABLISH.
2000-07-24 09:25:53 +00:00
1045aba51d
Define UVM_PAGE_IDLE_ZERO.
2000-07-24 09:14:56 +00:00
a95d924d4d
Fix delay slot error in the SUN4_MMU3L startup code.
2000-07-24 08:48:03 +00:00
2933116823
Fix stack issues in bzero.
2000-07-24 07:40:40 +00:00
2f13e00500
Revert the previous change for now. I don't have time to debug it tonight.
2000-07-24 06:30:34 +00:00
ac182d9c19
Er, eliminate the -p link option as well, which just outputs huge amounts
...
of spooge.
2000-07-24 04:54:16 +00:00
711ffefeac
Nuke lderr.
2000-07-24 04:45:49 +00:00
0c2ad746ea
Slight rearrangement.
2000-07-24 04:39:01 +00:00
4cbff173ea
Fix an obvious error that would cause fpu_ftoxi() to drop the upper half.
...
The compiler even emitted a warning for this...
2000-07-24 04:13:45 +00:00
bdc8c86c9e
asm volatile --> __asm __volatile
2000-07-24 04:11:03 +00:00
b65d3e93c9
Make this a bit safer against errors by using some .tmp files.
2000-07-24 02:00:39 +00:00
62fe935649
Give this a prayer of working with obj dirs.
2000-07-24 01:55:59 +00:00
8de9ab874b
Make this at least pretend to compile.
2000-07-24 01:51:44 +00:00
51b68e1fdd
Fix compiler warnings.
2000-07-24 01:49:37 +00:00
2f39009bda
Fix multiple problems with floating point and structure handling.
2000-07-23 21:36:56 +00:00
41167b7f9a
__BROKEN_CONFIG_UNIT_USAGE is no longer required for mvme68k.
2000-07-23 20:51:18 +00:00
2f194db83c
G/C cf_unit. It wasn't really being used in a meaningfull way.
2000-07-23 20:50:21 +00:00
e98c241a12
Make these work with obj directories.
2000-07-23 20:40:44 +00:00
acbf46fbf4
Copy bzero change from libc.
2000-07-23 20:39:14 +00:00
aa381d4db2
Add WSEMUL_VT100 to configuration files using wsdisplay.
...
And update my current configuration. (MIMORI)
2000-07-23 10:06:43 +00:00
999ba2b285
Give 64-bit processes access to a full 64-bit address space (90% of which
...
they can't use anyway, but that's another issue.)
2000-07-23 07:02:19 +00:00
526bc1de59
Include <machine/frame.h> to get the definition of BIAS and CC64FSZ.
2000-07-23 06:57:55 +00:00
46a7cab70a
make this usable for for userland asm, which needs CC64FSZ
2000-07-23 06:15:33 +00:00
f6ce16a43b
Fix up alignment of incoming payloads. BOOTP at least now works.
2000-07-22 21:30:54 +00:00
a57e77c50f
Minor comment update; remove unused code.
2000-07-22 21:23:05 +00:00
87143d03cf
Include <sys/systm.h>, if only for printf() prototype.
2000-07-22 19:43:03 +00:00
a86a9c61c4
better message from John Hawkinson <jhawk@MIT.EDU>
2000-07-22 17:43:36 +00:00
9c47f8b134
Read the ECID from each podule just before we launch the kernel. This means
...
that the ROM page registers on the podules are likely to end up pointing at
the page with the ECID in it, so NetBSD can recognise the podules.
This is necessary for my i-cubed EtherLan cards, at least.
2000-07-22 15:36:15 +00:00
2e61c1bdb7
Correct spelling and capitalisation of "EtherLan".
...
Add EtherLan 100Lk (8-bit mini-podule).
2000-07-22 15:05:47 +00:00
733c04149a
Experimental MQ200 video driver. It's just copy of bivideo plus power
...
management routine.
2000-07-22 08:53:33 +00:00
d84cab3012
vrkiu_getc() will call over and over. but we want to see 'not implemented'
...
only once.
2000-07-22 08:26:00 +00:00
db17c07fd3
mb_bus_space_init() had been removed accidentally when KGDB was supported.
...
It's need for initialize system_bus_iot.
2000-07-22 06:02:46 +00:00
a6f212052a
Enable emulation for everything but 7xx/8xxxx
2000-07-22 05:03:23 +00:00
ecdd72f783
Overwrite color map of rasops.
2000-07-22 03:46:53 +00:00
21d18c459f
do bootblock versioning standard way via sys/conf/newvers_stand.sh, keep what
...
was previously called "subversion" as "build", remove old cruft from newvers.sh
XXX very lighly tested build on NetBSD/hp300 1.4.1, though could not do full
XXX build due to toolchain differences to -current
2000-07-21 22:26:19 +00:00
01d7296690
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
sync the message in boot/version with other ports using newvers_stand.sh
2000-07-21 22:06:11 +00:00
ab07c9d5a9
switch to sys/conf/newvers_stand.sh for generation of version file
...
sync the message in boot/version with other ports using newvers_stand.sh
2000-07-21 22:02:54 +00:00
d89f124868
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
sync the message in boot/version with other ports using newvers_stand.sh
2000-07-21 21:57:23 +00:00
0ebf73d4cf
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
2000-07-21 21:54:54 +00:00
20933708ec
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
2000-07-21 21:42:25 +00:00
4c97163e2d
switch to sys/conf/newvers_stand.sh for generation of version files, no
...
functional changes
2000-07-21 21:34:27 +00:00
911d661dad
switch to sys/conf/newvers_stand.sh for generation of version files
...
move the vers.c depend/build goo to Makefile.bootprogs and remove
explicit rules in other Makefiles
sync the message in */version files with other ports using newvers_stand.sh
XXX the new depend rules were tested to limited extend (also with obj dirs)
XXX on i386 and should be ok; the changes should not otherwise influence build
2000-07-21 21:25:18 +00:00
1cce37b1f4
Make this compile again.
2000-07-21 20:18:35 +00:00
d6d63e19fe
G/C a debugging printf left over from the last commit.
2000-07-21 08:08:38 +00:00
263f73d7f4
Now we're running 64-bit userland don't panic the system if a process steps
...
into the address space hole.
2000-07-20 23:29:50 +00:00
0e306bace6
kgdb support for the vr hpcmips machines.
...
From Ethan Solomita (ethan@geocast.com ).
2000-07-20 21:03:36 +00:00
0a25b480c6
Clean up disassembly of sparc v9 insns and handling of negative values.
2000-07-20 20:43:21 +00:00
83e678b1a4
Implement generic soft interrupts for mvme68k.
...
Based on Jason Thorpe's Alpha implementation.
2000-07-20 20:40:34 +00:00
da2949153f
Disable dtide since it doesn't work (and probably never will -- the card's
...
brain-dead).
2000-07-20 20:27:11 +00:00
6744ec9f53
Include locore.S in the main assembly mkdep.
2000-07-20 20:26:32 +00:00
b5d3226a07
General tidying up, notably:
...
- Get the Ethernet address from the card's description string, rather than
relying on RISC OS to set it.
- Don't mention this is a SEEQ8005 -- that's all an "ea" can be.
- Use format_bytes to display the amount of buffer RAM.
2000-07-20 20:25:10 +00:00
2ebdfcd251
Make pmap_prefer() use a global setting based on cache size
...
instead of assuming 64KB. This allows best fit and will
support bigger caches.
2000-07-20 18:33:40 +00:00
c8b819c2ed
Include kgdb hooks in trap.c. Include bits of DDB code for kgdb also. Remove
...
some local prototypes that are in headers now.
2000-07-20 18:14:46 +00:00
4badffe2c1
For now, alias `network' to `hme'.
2000-07-20 16:29:03 +00:00
71169064c4
Since `intrcnt' points to an array of long ints, reserve the appropriate
...
amount of space depending on _LP64. Provide macros to load/store signed
and unsigned long ints.
Also, make the `intrcnt' and `intrpending' arrays 16 entries long, as on
sparc/v9 interrupt #15 is just a regular interrupt.
2000-07-20 13:28:39 +00:00
23f2392b19
don't define TAILQ_FOREACH, it's in sys/queue.h now.
2000-07-20 03:44:46 +00:00
d8d3c52075
Move masked status and instr into jal cpu_intr delay slot.
2000-07-20 00:43:07 +00:00
5938072101
In FPU excepton code, send SIGILL if no one claims the instruction.
...
SIGFPE is still delivered where appropriate.
2000-07-19 22:05:02 +00:00
96122c2884
Do mtpr(0, PR_TBIA), not mtpr(1, PR_TBIA). This has worked on all CPUs
...
except for KA88.
2000-07-19 21:08:06 +00:00
64d555c075
Improve outofworld: to include the vaddr. Removed unused mips3_Set64bit
...
and an #if 1.
2000-07-19 20:46:00 +00:00
b14e1fbbd4
Tpyo
2000-07-19 20:29:45 +00:00
f079e15d48
- Remove asc driver, since it doesn't work
...
- Reduce maxusers to 2
2000-07-19 19:41:48 +00:00
32ee71ac65
Fix stacktrace() to have an 8 byte aligned stack. On our platform previously
...
it would hang-up. logstacktrace() actually was the same as stacktrace() so
just make it an XLEAF() for now. Include some DDB code for KGDB compilation.
2000-07-19 18:56:36 +00:00
8b8bf4501b
At the start of the kernel, keep the MIPS3_SR_DIAG_BEV setting
...
on mips3 systems, until the kernel actually hooks the vectors.
This makes it easier to debug early problems if the firmware
has provides an exception handler.
2000-07-19 18:38:41 +00:00
38c659cca5
Include ELF support by default.
2000-07-19 18:29:21 +00:00
8e9ff5814e
More ELF changes (a.out still works).
2000-07-19 18:15:01 +00:00
9faf26ffb5
This file is obsolsete.
2000-07-19 17:39:57 +00:00
8c2ce5b135
New configuration, based on GENERIC, but small enough to fit on a system
...
with 4Mb of RAM (I hope).
2000-07-19 16:39:30 +00:00
6996dd8691
Fix merge problem.
2000-07-19 15:48:25 +00:00
25f8633edd
Add an option to poll the ROM console from hardclock you can break into DDB
...
even if callouts are disabled.
2000-07-19 15:41:53 +00:00
e72ba11928
In cpu_switch(), load value *after* checking that the base register
...
is not NULL.
2000-07-19 14:00:24 +00:00
5867f914e8
Add (commented out) "options TCVERBOSE".
2000-07-19 10:42:22 +00:00
e3fc09812a
make myetheraddr() work even if the clock hasn't been setup yet
2000-07-19 10:20:09 +00:00
422e1b7236
Disable interrupt interlock using ih->ih_pending field. Seems to cause
...
more problems than it solves.
2000-07-19 04:36:42 +00:00
625dc5189f
Miscellaneous cleanup.
2000-07-19 03:24:07 +00:00
d66b7dcc2d
Switch to loadfile instead of exec. Now we can load a.out or ELF kernels.
2000-07-19 02:39:11 +00:00
ad99ca5ed2
use size_t instead of u_int.
2000-07-19 01:02:52 +00:00
ab5d2882a0
Move KA630 definitions from boot/boot/consio.c to here.
2000-07-19 01:01:58 +00:00
15c6bb6dbd
ELFify (udiv -> __udiv, urem -> __rem)
2000-07-19 01:01:02 +00:00
732a08c3c3
Put the assembly consio routines in a separate file so it can deal with
...
a.out/ELF differences.
2000-07-19 00:59:20 +00:00
9b4c867626
Add support for loading a 2nd stage boot in either a.out or ELF.
...
Add support for loading a 2nd stage boot directly to it's desired address
if possible.
cleanup use of u_int/size_t.
2000-07-19 00:58:23 +00:00
067b7521b5
Fix PIC bugs.
2000-07-18 22:38:11 +00:00
59a7148fe9
address casts: long -> u_long
2000-07-18 20:19:56 +00:00
db76bf893e
Cast pointer to `u_long' (not `long') for correct results.
2000-07-18 20:15:36 +00:00
602e908589
Correct args usage comment in probeget.
...
Whitespace cleanup.
2000-07-18 20:14:45 +00:00
1d14ce3842
probeget: 9 -> 0x9
2000-07-18 19:27:57 +00:00
c0e91fb184
If `ih_pending' is set simply return from the trap, don't schedule another
...
soft interrupt.
2000-07-18 19:25:26 +00:00
a49fddc9b3
openfirmware: don't lower %pil
2000-07-18 12:52:56 +00:00
9cb57a12a7
Change KERNBASE to 0xe0000000 to give more room for KVA. This is the maximum
...
amount of KVA that is supportable on the ns32532.
2000-07-18 12:45:49 +00:00
36b85ab9c7
hexadecimal constant in "options" value doesn't need quotation.
2000-07-18 11:41:32 +00:00
87b0dd6e6a
make PCIBIOS_IRQS_HINT patchable.
2000-07-18 11:37:56 +00:00
34270e85bd
Use probeget() in pci_config_read() for the psycho, to avoid bus
...
faults when probing PCI space.
2000-07-18 11:37:31 +00:00
073e24cd1b
Set up register bank sharing bwteen psycho A & B based on matching
...
physical addresses. Allocate IOMMU state separately and refer to it
from both psycho_softc's.
2000-07-18 11:35:03 +00:00
52e3dc4e56
use I386_PCI_INTERRUPT_LINE_NO_CONNECTION instead of magic number.
2000-07-18 11:24:09 +00:00
663add1b20
use PCI_INTERRUPT_PIN_MAX and I386_PCI_INTERRUPT_LINE_NO_CONNECTION,
...
instead of magic number
2000-07-18 11:23:28 +00:00
81858d7c01
- Use PCIBIOS_PRINTV().
...
- Use PCI_INTERRUPT_PIN_MAX and I386_PCI_INTERRUPT_LINE_NO_CONNECTION
instead of magic number.
the Following changes are
{Modified with,Approved by} UCHIYAMA Yasushi <uch@netbsd.org>:
- Do not touch a PIRQ router, if the PIRQ is already routed
by the BIOS, or no appropriate IRQ is found for the PIRQ.
The latter prevents a panic on the machine of Frank van der Linden.
- Do not modify a PCI Interrupt Configuration register,
if it is already set by the BIOS, even if it is inconsistent
with the PCI IRQ routing table provided by the BIOS.
(The PCI Interrupt Configuration register seems to be more reliable
than the PCI IRQ routing table.)
This is needed to prevent a incorrect header_fixup() caused
by the incorrect PIR table on a Panasonic Let's Note AL-N2T516J5.
Provide "options PCIBIOS_INTR_FIXUP_FORCE" to retain
previous behavior, i.e. believe the PCI IRQ routing table
and ignore the PCI Interrupt Configuration register.
Although I'm not sure this is really needed.
- Do not modify a PCI Interrupt Configuration register,
if appropriate IRQ is not found for the link.
- Move a pciintr_icu_getclink() call and a pciintr_icu_get_intr()
call from pciintr_link_fixup() to pciintr_link_alloc(),
and only allocate pciintr_link_map if those calls succeeded.
This reduces number of calls of pciintr_icu_getclink(),
and also avoid necessity to validate a clink value in
ICU's {get,set}_{intr,trigger}() functions.
The sanity checks are not removed yet, though.
- Fix uninitialized usage of variable `bitmap' on stage 3
of pciintr_link_fixup().
- Remove a member variable `old_irq' from struct pciintr_link_map.
- Always use 0x%02x for printf format of canonical link value.
- Use DIAGNOSTIC instead of PCIINTR_DEBUG for really weird situation.
2000-07-18 11:22:36 +00:00
b01ab37ef6
use PCIBIOS_PRINTV() defined in pcibios.h, instead of homegrown DPRINTF().
2000-07-18 11:18:04 +00:00
698b2b1173
- define pcibiosverbose here, instead of each C source.
...
- use PIR_DEVFUNC_{DEVICE,FUNCTION}.
2000-07-18 11:15:25 +00:00
0e8343265b
- define PCIBIOS_PRINTV() as pcibiosverbose printf() here,
...
instead of DPRINTF() in each C source.
- define PIR_DEVFUNC_{DEVICE,FUNCTION}
2000-07-18 11:14:06 +00:00
2f9cb9c128
add several debug printf which can be enabled by PIIX_DEBUG.
2000-07-18 11:10:22 +00:00
9a7e0d82ac
- deal with FIRESTAR_PIR_SELECT_PIRQ case on set/get_trigger(),
...
to prevent a panic on a Panasonic Let's Note AL-N2T516J5.
- add several debug printf which can be enabled by FIRESTARDEBUG.
by UCHIYAMA Yasushi <uch@netbsd.org>
- use I386_PCI_INTERRUPT_LINE_NO_CONNECTION instead of magic number.
2000-07-18 11:07:20 +00:00
b8a6bd6e11
add "#define I386_PCI_INTERRUPT_LINE_NO_CONNECTION 0xff"
2000-07-18 11:00:35 +00:00
f7dacc7a8e
Use spl*_noprof routines to raise and lower spl for kernel profiling.
...
This keeps the SR management more contained in locore, and should
be roughly the same performance as the .text size is less. Talked
to simonb and he was ok with this change.
2000-07-18 06:25:32 +00:00
ea0cb4c30e
Clear the ISDN TXPTR/RXPTR/OVRN interrupt bits here. Based on
...
a suggestion by Gregory McGarry.
2000-07-18 06:10:06 +00:00
faaa100d6e
#if 0 some dumpsys() debugging messages
2000-07-18 05:18:35 +00:00
d2626038cd
kill dead files.
2000-07-18 04:21:17 +00:00
040268c10e
s/auxreg/auxio/
2000-07-18 04:17:23 +00:00
8e5b35a55a
Fix FP exception handling that was recently broken and would not
...
run src/regress cleanly. Need to save and restore the frame pointer
for fpemul_sig*().
2000-07-18 00:41:18 +00:00
5961b67774
if MIPS3_ENABLE_CLOCK_INTR is defined, set MIPS3_[HARD_]INT_MASK
...
appropriately. This supports ports that use the internal clock.
Add 2 diag register defines that are specific to QED processors.
2000-07-17 23:35:13 +00:00
0e0c4d24e8
Move platform db_trap callback from arch/mips into ddb as suggested by
...
jhawk. This callback is used by platform code to manage things like
watchdogs that should be disabled while in ddb. Done as a callback
for processors such as mips that support lots of different systems.
2000-07-17 19:57:49 +00:00
1d1b0968f1
IF we're changing hz, change tick accordingly too.
2000-07-17 18:32:25 +00:00
ec726f07ca
Kill typos in interrupt code.
2000-07-17 17:06:00 +00:00
0eb897823b
There is no music device - g.c. its cdev_decl.
2000-07-17 16:57:19 +00:00
71ccd6200d
Add (but commented) COMPAT_PECOFF entry.
2000-07-17 14:37:53 +00:00
966115ff9e
probeget: do the same song and dance as ld*a() macros in ctlreg.h do.
2000-07-17 14:08:43 +00:00
efabca31b5
Make memcpy() the favored interface an swizzle the args for ovbcopy. Also
...
move bcopy XLEAF here from locore.S. For 64b clean compilation add a
ld/sd section to the block copy.
2000-07-17 07:37:50 +00:00
2fd0d88f44
Use <uvm/uvm_extern.h> instead of vm/vm.h
2000-07-17 07:06:13 +00:00
116a6f8233
Pull in geocast mips ddb improvements and start bringing in kgdb support.
...
Add ddb support for QED opcodes, fill in enough routines so "next" usually
works, kdbpoke support for any size. Add callback that ports can hook when
entering and leaving ddb. This can be used for things like turning
off watchdogs while in ddb.
2000-07-17 07:04:19 +00:00
fc1ba82306
Make this compile again: restore missing prototype.
2000-07-17 06:53:42 +00:00
d63c5d05ce
Catch up with d_mmap parameter change. From Steve Peurifoy via PR #10603 .
2000-07-17 06:52:31 +00:00
b4f5693f98
Repair format type mismatch in DEBUG code. From Steve Peurifoy via PR #10603 .
2000-07-17 06:51:18 +00:00
196f358a96
Correct return type of grfaddr(). From Steve Peurifoy via PR #10603 .
2000-07-17 06:50:32 +00:00
5edc9ef4a4
When computing the segment size, consider the maximum segment
...
size in the DMA map.
2000-07-17 04:47:56 +00:00
f96915efa5
Changes so that the kernel can be compiled under __ELF__.
2000-07-17 02:54:04 +00:00
5d9fda1ecd
switch size_t, ptrdiff_t, & ssize_t to long int (signed or unsigned) for
...
__ELF__.
2000-07-17 02:52:24 +00:00
77c0fe57cf
convert to use version template and newvers_stand.sh script for generating
...
bootblock revision strings, use bootbock_name[] (i.e. "NetBSD/sun3")
in initial bootblock messages instead of just "NetBSD"
while here, do sligh Makefile cleanup to share more code between them and also
to make buildable on NetBSD 1.4.1 (my test compile system)
get rid of the XX define hack for netboot & ufsboot, build xxboot.c as
part of libsa - previos main() was renamed to xxboot_main(), main()
is now in respective conf.c files and calls xxboot_main() with
appropriate name of boot block type
XXX I had no chance to actually test the resulting bootblocks, but the
changes were fairly streightforward and should no influence functionality of
boot code
2000-07-16 21:56:12 +00:00
d9151a2dc8
Add a uuencoded tokenised BASIC version of BBBB, since it can't yet be
...
generated without RISC OS.
2000-07-16 12:54:04 +00:00
87dbab4963
Warn about <8bpp screen modes.
...
Fix a typo in "page in use" message.
2000-07-16 12:46:50 +00:00
480203ba75
change intptr_t and uintptr_t to long and unsigned long respectively. This
...
is a noop on 32 bit machines, but it makes lint quiet and it is more correct.
2000-07-16 02:18:11 +00:00
2890290b0f
Add com* at obio0. (Tadpole & JavaStation)
2000-07-15 19:59:53 +00:00
1d97a430c4
Enhance this so it support the com port on the JavaStation 1 as well as
...
the tadpole internal modem.
2000-07-15 19:57:03 +00:00
83e844cf03
Add a prototype for netintr()
2000-07-15 19:17:19 +00:00
b3b275a389
The install ramdisk has grown somewhat, and now overwrites the
...
`ie' chip's packet buffer... Moving it up to just below the netboot
image (4MB) should leave room for a few more year's bloat. ;-)
2000-07-15 16:04:24 +00:00
eb5863f522
#ifdef BOOT_DEBUG --> BDPRINTF(PDB_BOOT, (...))
2000-07-15 14:26:39 +00:00
4eacbabe76
Make 64-bit stack tracebacks look decent.
2000-07-14 21:07:10 +00:00
6667752114
Move some macro definitions out of genassym and into locore.s
2000-07-14 21:04:16 +00:00
3143adecfb
Tell gcc that stores clobber "memory". Probably makes no difference since
...
they should not be used to access normal memory anyway.
2000-07-14 21:02:11 +00:00
41da794863
Make all the inline functions static.
2000-07-14 21:00:17 +00:00
7b6085ff22
Add support for 64-bit PIC and dynamic linking.
2000-07-14 20:59:07 +00:00
1dfa0ec96d
Use cpu_intr() definition from mips/cpu.h instead of local one.
2000-07-14 18:35:38 +00:00
9de310aebe
Use per-PBM control/status register addresses provided by the PROM.
...
Print version/implementation info.
2000-07-14 15:13:35 +00:00
04fe9636ba
Provide details on the `psy_csr' register.
2000-07-14 15:09:51 +00:00
8258c0e780
Fix padding in struct pci_ctl.
2000-07-14 13:17:12 +00:00
e5a9cce870
Cast physmem to u_int64_t before applying ctob().
2000-07-14 13:15:44 +00:00
68edef1bf6
Back out previous for now; it requires a system wide prototype change.
2000-07-14 09:58:52 +00:00
2d699aa6ce
Change some comment formatting.
2000-07-14 08:21:14 +00:00
0688add8e8
Take care of prototype changes for console probe and console getc.
2000-07-14 08:18:49 +00:00
500013914e
Make timebase frequency value adjustable.
2000-07-14 05:53:31 +00:00
c32ffb8447
Make `physmem' an `unsigned int', so it can properly represent large memory
...
configurations.
2000-07-14 00:02:35 +00:00
5942ac860b
switch to sys/conf/newvers_stand.sh for generating vers.c
2000-07-13 22:25:14 +00:00
9c15bcabda
switch to sys/conf/newvers_stand.sh for generating vers.c
...
sync comments in */version with i386
2000-07-13 22:18:12 +00:00
f6330c6500
switch to sys/conf/newvers_stand.sh for generating vers.c
...
sync comments in */version with i386
add a hack to ${PROG} target so that symlinks machine, pmax, mips are
created properly even when building on NetBSD/pmax 1.4.1
2000-07-13 22:18:08 +00:00
1fa850b0ef
config file for Dreamcast
2000-07-13 18:11:53 +00:00
e527d66d55
Fix mem_no. Pointed out by cgd.
2000-07-13 18:10:38 +00:00
e633c4ca18
don't initialize BSC when BSC is already initialized (e.g. Dreamcast)
2000-07-13 18:02:10 +00:00
ca051b5fb3
fix some obvious paste errors in 'uk' cdev inits
2000-07-13 17:40:34 +00:00
9da8631e2b
printf() format for 64-bit integers `tf_pc' and `tf_npc'.
2000-07-13 16:44:03 +00:00
ef9531850e
Add comment that overriding the sysctl defines in machine/cpu.h
...
breaks userland binary compatiabiltiy between mips ports. Move
check down so common values are always defined here.
2000-07-13 07:37:11 +00:00
soda