Include NONPLUS and just set the extras we need for 64-bit kernels.
This commit is contained in:
eeh
parent
068c76fc80
commit
dfe3516515
|
|
@ -1,395 +1,10 @@
|
|||
# $NetBSD: NONPLUS64,v 1.16 2000/07/27 14:34:10 mrg Exp $
|
||||
# $NetBSD: NONPLUS64,v 1.17 2000/08/02 02:23:58 eeh Exp $
|
||||
|
||||
include "arch/sparc64/conf/std.sparc64"
|
||||
include "arch/sparc64/conf/NONPLUS"
|
||||
|
||||
maxusers 64
|
||||
#ident "GENERIC64-$Revision: 1.17 $"
|
||||
|
||||
## System kernel configuration. See options(4) for more detail.
|
||||
|
||||
|
||||
# Options for variants of the Sun SPARC architecure.
|
||||
# We currently support three architecture types; at least one is required.
|
||||
options SUN4U # sun4u - Ultra 140 and 170
|
||||
options __ELF__ # we use elf
|
||||
options _LP64 # we're using a 64-bit compiler
|
||||
makeoptions SPARC64_BINARIES=1
|
||||
|
||||
## System options specific to the sparc machine type
|
||||
|
||||
## Use a faster console than the PROM's slow drawing routines. Not needed
|
||||
## for headless (no framebuffer) machines.
|
||||
#options RASTERCONSOLE # fast rasterop console
|
||||
#options FONT_GALLANT12x22 # the console font
|
||||
#options FONT_BOLD8x16 # a somewhat smaller font
|
||||
|
||||
#### System options that are the same for all ports
|
||||
|
||||
## Root device configuration: change the ?'s if you are going to use a
|
||||
## nonstandard root partition (other than where the kernel is booted from)
|
||||
## and/or nonstandard root type (not ffs or nfs). Normally this can be
|
||||
## automagically determined at boot time.
|
||||
|
||||
config netbsd root on ? type ?
|
||||
|
||||
## UVM options.
|
||||
options UVM_PAGE_TRKOWN
|
||||
options UVMHIST
|
||||
#options UVMHIST_PRINT # Loud!
|
||||
|
||||
## System call tracing (see ktrace(1)).
|
||||
options KTRACE
|
||||
|
||||
## Collect statistics on kernel malloc's and free's. This does have a
|
||||
## significant performance hit on slower machines, so it is intended for
|
||||
## diagnostic use only.
|
||||
options KMEMSTATS
|
||||
|
||||
## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2))
|
||||
options SYSVMSG # System V message queues
|
||||
options SYSVSEM # System V semaphores
|
||||
options SYSVSHM # System V shared memory
|
||||
#options SHMMAXPGS=1024 # 1024 pages is the default
|
||||
|
||||
## Loadable kernel module support; still under development.
|
||||
options LKM
|
||||
|
||||
## NFS boot options; default on sparc is the bootparam protocol
|
||||
options NFS_BOOT_BOOTPARAM
|
||||
#options NFS_BOOT_BOOTP
|
||||
#options NFS_BOOT_DHCP
|
||||
|
||||
#### Debugging options
|
||||
|
||||
## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
|
||||
## serial console break or keyboard reset, where the PROM would normally
|
||||
## intercept. DDB_HISTORY_SIZE adds up/down arrow command history.
|
||||
options DDB # kernel dynamic debugger
|
||||
options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
||||
options DDB_ONPANIC # see also sysctl(8): `ddb.onpanic'
|
||||
|
||||
## You may also use gdb, on another computer connected to this machine over
|
||||
## a serial port. Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is
|
||||
## a dev_t encoded device number of the serial port to use.
|
||||
## (0xc01 = ttya, 0xc02 = ttyb.)
|
||||
#options KGDB # support for kernel gdb
|
||||
#options KGDBDEV=0xc01 # kgdb device number (this sample is `ttyb')
|
||||
#options KGDBRATE=38400 # baud rate
|
||||
|
||||
|
||||
## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
|
||||
## such that gdb(1) can be used on a kernel coredump.
|
||||
|
||||
makeoptions DEBUG="-g"
|
||||
|
||||
|
||||
## Adds code to the kernel that does internal consistency checks, and will
|
||||
## cause the kernel to panic if corruption of internal data structures
|
||||
## is detected.
|
||||
options DIAGNOSTIC # extra kernel sanity checking
|
||||
|
||||
## Enable (possibly expensive) debugging code that may also display messages
|
||||
## on the system console
|
||||
options DEBUG
|
||||
|
||||
## Enable printing of spl() transisions -- really slow
|
||||
##
|
||||
#options SPLDEBUG
|
||||
|
||||
## Make SCSI error messages more verbose when explaining their meanings.
|
||||
options SCSIVERBOSE
|
||||
|
||||
## `INSECURE' turns off the kernel security level (securelevel = 0 always).
|
||||
## This allows writing to /dev/mem, loading kernel modules while multi-user,
|
||||
## and other insecurities good only for development work. Do not use this
|
||||
## option on a production machine.
|
||||
#options INSECURE
|
||||
|
||||
## Allow non-root users to grab /dev/console with programs such as xconsole.
|
||||
## `xconsole' therefore does not need setuid root with this option enabled.
|
||||
#options UCONSOLE
|
||||
|
||||
## `FDSCRIPTS' allows non-readable but executable scripts by providing a
|
||||
## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS',
|
||||
## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
|
||||
## opaque file mechanism. Perl calls this "secure setuid scripts."
|
||||
|
||||
#options FDSCRIPTS
|
||||
#options SETUIDSCRIPTS
|
||||
|
||||
## Options for compatibility with previous releases foreign system binaries.
|
||||
## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up
|
||||
## additional user-level utilities or system configuration files. See
|
||||
## compat_sunos(8) and compat_svr4(8).
|
||||
|
||||
options COMPAT_43 # 4.3BSD system interfaces
|
||||
options COMPAT_10 # NetBSD 1.0 binary compatibility
|
||||
options COMPAT_11 # NetBSD 1.1 binary compatibility
|
||||
options COMPAT_12 # NetBSD 1.2 binary compatibility
|
||||
options COMPAT_13 # NetBSD 1.3 binary compatibility
|
||||
options COMPAT_14 # NetBSD 1.4 binary compatibility
|
||||
options COMPAT_NETBSD32 # NetBSD/sparc binary compatibility
|
||||
options COMPAT_SUNOS # SunOS 4.x binary compatibility
|
||||
options COMPAT_SVR4 # SunOS 5.x binary compatibility
|
||||
options EXEC_ELF32 # Exec module for SunOS 5.x binaries.
|
||||
options EXEC_ELF64 # Exec module for SunOS 5.x binaries.
|
||||
options SYSCALL_DEBUG
|
||||
options EXEC_AOUT # execve(2) support for a.out binaries
|
||||
|
||||
## File systems. You probably need at least one of FFS or NFS.
|
||||
file-system FFS # Berkeley Fast Filesystem
|
||||
file-system NFS # Sun NFS-compatible filesystem client
|
||||
file-system KERNFS # kernel data-structure filesystem
|
||||
file-system NULLFS # NULL layered filesystem
|
||||
file-system MFS # memory-based filesystem
|
||||
file-system FDESC # user file descriptor filesystem
|
||||
file-system UMAPFS # uid/gid remapping filesystem
|
||||
file-system LFS # Log-based filesystem (still experimental)
|
||||
file-system PORTAL # portal filesystem (still experimental)
|
||||
file-system PROCFS # /proc
|
||||
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
||||
file-system UNION # union file system
|
||||
file-system MSDOSFS # MS-DOS FAT filesystem(s).
|
||||
|
||||
## File system options.
|
||||
options NFSSERVER # Sun NFS-compatible filesystem server
|
||||
options QUOTA # FFS quotas
|
||||
#options FFS_EI # FFS Endian Independent support
|
||||
#options SOFTDEP # FFS soft updates support.
|
||||
|
||||
## Network protocol support. In most environments, INET is required.
|
||||
options INET # IP (Internet Protocol) v4
|
||||
options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility
|
||||
#options GATEWAY # packet forwarding ("router switch")
|
||||
#options MROUTING # packet forwarding of multicast packets
|
||||
#options DIRECTED_BROADCAST # allow broadcasts through routers
|
||||
#options NS # Xerox NS networking
|
||||
#options NSIP # Xerox NS tunneling over IP
|
||||
options ISO,TPIP # OSI networking
|
||||
#options EON # OSI tunneling over IP
|
||||
#options CCITT,LLC,HDLC # X.25 packet switched protocol
|
||||
options NETATALK # AppleTalk (over Ethernet) protocol
|
||||
#options NTP # Network Time Protocol in-kernel support
|
||||
#options PPS_SYNC # Add serial line synchronization for NTP
|
||||
#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs.
|
||||
#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
|
||||
options PPP_BSDCOMP # Add BSD compression to ppp device
|
||||
options PPP_DEFLATE # Add deflate (libz) compression to ppp device
|
||||
options PPP_FILTER # Add active filters for ppp (via bpf)
|
||||
|
||||
|
||||
|
||||
#### Main bus and CPU .. all systems.
|
||||
mainbus0 at root
|
||||
cpu0 at mainbus0 # UPA bus for the moment
|
||||
|
||||
#### Bus types found on SPARC systems.
|
||||
|
||||
sbus0 at mainbus0 # sun4c and sun4u
|
||||
#pci* at mainbus0 # pci buses
|
||||
#ebus* at pci? # ebus devices
|
||||
|
||||
#### Standard system devices -- all required for a given architecture
|
||||
|
||||
## Auxiliary system registers -- We use the OBP for power management
|
||||
#auxio* at ebus? # auxio registers
|
||||
#auxio* at sbus? slot ? offset ? # auxio registers
|
||||
|
||||
# We also need:
|
||||
# bpp0 at sbus0 # parallel port
|
||||
# ecpp0 at pci0 # parallel port ?
|
||||
|
||||
## Mostek clock
|
||||
clock0 at sbus0 slot ? offset ?
|
||||
#clock0 at pci0
|
||||
|
||||
## Timer chip
|
||||
timer0 at mainbus0
|
||||
|
||||
#### Serial port configuration
|
||||
|
||||
## Zilog 8530 serial chips. Each has two-channels.
|
||||
## zs0 is ttya and ttyb. zs1 is the keyboard and mouse.
|
||||
zs0 at sbus0 slot ? offset ?
|
||||
zstty0 at zs0 channel 0 # ttya
|
||||
zstty1 at zs0 channel 1 # ttyb
|
||||
|
||||
zs1 at sbus0 slot ? offset ?
|
||||
kbd0 at zs1 channel 0 # keyboard
|
||||
ms0 at zs1 channel 1 # mouse
|
||||
|
||||
## PCI machines apparently have serial ports
|
||||
## called `se' and `su'
|
||||
|
||||
## Part of a PC87332VLJ?
|
||||
#se0 at ebus? #
|
||||
#kbd0 at su1 channel 0 # keyboard
|
||||
#ms0 at su1 channel 1 # mouse
|
||||
|
||||
## These are two SAB82532 controllers
|
||||
#su0 at ebus? # ttya
|
||||
#su1 at ebus? # ttyb
|
||||
|
||||
|
||||
#### Disk controllers and disks
|
||||
|
||||
#
|
||||
|
||||
## The following flags may be set for the NCR53c94 based esp driver:
|
||||
## bits 0-7: disable disconnect/reselect for the corresponding target
|
||||
## bits 8-15: disable synchronous negotiation for target [bit-8]
|
||||
|
||||
## sun4/300, sun4c, sun4m on-board SCSI, and FSBE/S SBus SCSI cards.
|
||||
## Both `dma' and `esp' are needed in all cases.
|
||||
## Two kinds of additional SBus SCSI interfaces are available. One uses
|
||||
## "esp at sbus" like the sun4c on-board; the other uses "esp at dma".
|
||||
|
||||
## sun4/300 SCSI - an NCR53c94 or equivalent behind
|
||||
## an LSI Logic DMA controller
|
||||
|
||||
dma* at sbus? slot ? offset ? # SBus
|
||||
esp* at dma? flags 0x0000 # SBus
|
||||
scsibus* at esp?
|
||||
|
||||
## FAS support missing
|
||||
#fas* at sbus? slot ? offset ? flags 0x0000 # fast/wide NCR derivative
|
||||
#scsi* at pci? # 53C875 "glm" compatible
|
||||
|
||||
|
||||
## Qlogic ISP SBus SCSI Card
|
||||
#isp* at sbus? slot ? offset ?
|
||||
#scsibus* at isp?
|
||||
|
||||
## These entries find devices on all SCSI busses and assign
|
||||
## unit numbers dynamically.
|
||||
sd0 at scsibus? target 0 lun 0 # SCSI disks
|
||||
sd1 at scsibus? target 1 lun 0 # SCSI disks
|
||||
sd2 at scsibus? target 2 lun 0 # SCSI disks
|
||||
sd3 at scsibus? target 3 lun 0 # SCSI disks
|
||||
sd4 at scsibus? target 4 lun 0 # SCSI disks
|
||||
sd5 at scsibus? target 5 lun 0 # SCSI disks
|
||||
sd6 at scsibus? target 6 lun 0 # SCSI disks
|
||||
sd* at scsibus? target ? lun ? # SCSI disks
|
||||
st* at scsibus? target ? lun ? # SCSI tapes
|
||||
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
|
||||
ch* at scsibus? target ? lun ? # SCSI changer devices
|
||||
ss* at scsibus? target ? lun ? # SCSI scanners
|
||||
uk* at scsibus? target ? lun ? # unknown SCSI
|
||||
|
||||
|
||||
## Floppy controller and drive found on SPARCstations.
|
||||
|
||||
#fdc0 at sbus0
|
||||
#fdc0 at pci? # Called fdthree?
|
||||
#fd* at fdc0 # the drive itself
|
||||
|
||||
|
||||
## A disk-like interface to files. Can be used to create floppy, CD,
|
||||
## miniroot images, etc.
|
||||
|
||||
pseudo-device vnd 4
|
||||
|
||||
## Concatenated and striped disks; with this, you can create a software-based
|
||||
## disk array similar to a "RAID 0" setup. See ccd(4).
|
||||
|
||||
pseudo-device ccd 4
|
||||
|
||||
## Memory disk device, used on boot floppies with compressed
|
||||
## kernel-plus-root-disk images.
|
||||
|
||||
#pseudo-device md 1
|
||||
|
||||
|
||||
#### Network interfaces
|
||||
|
||||
## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue
|
||||
## Three flavors of additional SBus ethernets are available. One attaches
|
||||
## directly like the sun4c on-board, one uses the ledma device like the
|
||||
## sun4m on-board, and one uses the lebuffer device.
|
||||
|
||||
ledma0 at sbus0 slot ? offset ? # sun4m on-board
|
||||
le0 at ledma0 # sun4m on-board
|
||||
#le* at sbus? slot ? offset ? # SBus
|
||||
#ledma* at sbus? slot ? offset ? # SBus
|
||||
#le* at ledma? # SBus
|
||||
#lebuffer0 at sbus? slot ? offset ? # SBus
|
||||
#le0 at lebuffer? # SBus
|
||||
lebuffer* at sbus? slot ? offset ? # SBus
|
||||
le* at lebuffer? # SBus
|
||||
|
||||
#hme0 at sbus0 slot ? offset ?
|
||||
#network* at pci? # "hme" compatible
|
||||
|
||||
## Loopback network interface; required
|
||||
pseudo-device loop
|
||||
|
||||
## SLIP and CSLIP interfaces, for IP over a serial line.
|
||||
pseudo-device sl 2
|
||||
|
||||
## PPP, the successor to SLIP. See pppd(8).
|
||||
pseudo-device ppp 2
|
||||
|
||||
## Starmode Radio IP, a special hardware network device.
|
||||
#pseudo-device strip 1
|
||||
|
||||
## Network "tunnel" device, allowing protocol stacks to run in the userland.
|
||||
## This is used by the third-party user-mode "ppp" program, and others.
|
||||
pseudo-device tun 4
|
||||
|
||||
## Berkeley Packet Filter, required to run RARPD. A generic C-language
|
||||
## interface that allows selective examining of incoming packets.
|
||||
pseudo-device bpfilter 8
|
||||
|
||||
## IP Filter, used in firewall and NAT applications. See ipnat(8) for
|
||||
## one example of the use of the IP Filter.
|
||||
pseudo-device ipfilter
|
||||
|
||||
|
||||
#### Audio and video devices
|
||||
|
||||
## /dev/audio support (`audiocs' plus `audio')
|
||||
##
|
||||
audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231
|
||||
audio* at audiocs0
|
||||
|
||||
|
||||
## Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m
|
||||
## systems. If your sun4 system has a cgfour installed in the P4 slot,
|
||||
## the P4 entries for "bwtwo" will attach to the overlay plane of the
|
||||
## "cgfour".
|
||||
|
||||
#bwtwo0 at sbus0 slot ? offset ? # sun4c and sun4m
|
||||
#bwtwo* at sbus? slot ? offset ? #
|
||||
|
||||
## Sun "cgthree" Sbus color framebuffer
|
||||
#cgthree0 at sbus? slot ? offset ?
|
||||
#cgthree* at sbus? slot ? offset ?
|
||||
|
||||
## Sun "cgsix" accelerated color framebuffer.
|
||||
cgsix0 at sbus? slot ? offset ?
|
||||
cgsix* at sbus? slot ? offset ?
|
||||
|
||||
## Sun "tcx" accelerated color framebuffer.
|
||||
#tcx0 at sbus? slot ? offset ?
|
||||
#tcx* at sbus? slot ? offset ?
|
||||
|
||||
# Sun "cgfourteen" accelerated 24-bit framebuffer.
|
||||
#cgfourteen0 at obio0 # sun4m
|
||||
|
||||
## Sun FFB not supported
|
||||
#ffb* at upa?
|
||||
|
||||
#### Other device configuration
|
||||
|
||||
## Pseudo ttys, required for network logins and programs like screen.
|
||||
## 32 is a good number for average systems; you may have as many as you
|
||||
## like, though 256 is more or less the upper limit. Increasing this
|
||||
## number still requires you to run /dev/MAKEDEV to create the files
|
||||
## for the ptys.
|
||||
|
||||
pseudo-device pty 32 # pseudo-ttys (for network, etc.)
|
||||
|
||||
## Random device, used to implement /dev/random (a source of random noise),
|
||||
## and generate randomness for some kernel formulae.
|
||||
## THIS DEVICE IS EXPERIMENTAL; use at your own risk.
|
||||
|
||||
#pseudo-device rnd
|
||||
options _LP64 # we're using a 64-bit compiler
|
||||
options COMPAT_NETBSD32 # NetBSD/sparc binary compatibility
|
||||
options EXEC_ELF64 # Exec module for sparc64 & SunOs 5.x binaries.
|
||||
makeoptions _LP64=1
|
||||
|
|
|
|||
Loading…
Reference in New Issue