Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
88,453 Commits 606 Branches 0 Tags 3.1 GiB
be8254f3a8
Commit Graph

824 Commits

Author SHA1 Message Date
sato
3f9cc29da9 fix vr4181 register offset. 2001-08-21 10:31:26 +00:00
jdolecek
74954dadf9 use unsigned variable types as appropriate 2001-08-05 18:07:51 +00:00
sato
0e356bc8ef fix VR4122 some unit address. 2001-08-04 14:08:46 +00:00
shin
ad4858224a make this file compilable without TX39IRDEBUG. 2001-08-02 04:30:01 +00:00
sato
c84f4a5476 adhoc battery event creation for some vr machines. 
XXX: temporary
this file is needed with vrpiu.c rev1.14
 2001-07-22 10:40:09 +00:00
takemura
64b6b76a21 You must set 'HPCFB_SWAP_*' if bytes are stored in reverse order, i.e. 
little endian like order, however, usage of 'HPCFB_SWAP_*' was widely
misunderstood because it reminded you of 'RI_BSWAP' in raster operation.
Please note that 'RI_BSWAP' indicate that frame buffer byte order is different
from natural order of system while 'HPCFB_REVORDER_*' is independent of
system byte order.
 2001-07-22 09:56:39 +00:00
thorpej
babefc5331 Add BUS_DMA_READ and BUS_DMA_WRITE flags, that hint the back-end 
at dmamap load time that the mapping will be used for a unidirectional
transfer of the specified direction.
 2001-07-19 15:32:10 +00:00
sato
9ae3738ab5 adhoc battery event creation for some vr machines. 
XXX: temporary
 2001-07-19 13:11:27 +00:00
toshii
e267c67b60 "infomation" -> "information" 2001-07-17 01:37:43 +00:00
enami
8b9f679d56 Adapt with recent md_root.c change; now you can put a root filesystem image 
into separate file if boot loader allows.
 2001-07-03 02:37:06 +00:00
uch
6c492e4e70 fix hpcio configuration. 2001-06-14 16:55:34 +00:00
uch
ea54d618ea ANSI KNF. and change my copyright to TNF copyright. 2001-06-14 11:09:55 +00:00
sato
4cc6a0ac93 fix 'mask clock to PIU' 2001-06-14 08:43:41 +00:00
uch
0774d04303 (TX39) switch from TX local I/O manager to hpcio 2001-06-13 19:09:07 +00:00
sato
01b21ab7a1 register VRIP_INTR_BAT handler to vrip_intr_establish(). 2001-06-13 16:05:59 +00:00
enami
4553af4ee5 Add minimal support for vr4122/vrc4173 pci. 2001-06-13 07:32:47 +00:00
enami
3df61fa9d9 Generic softintr for hpcmips. 2001-06-13 06:03:10 +00:00
enami
43b992855b Comment about start address of LED unit in vr4122. 2001-06-11 10:04:27 +00:00
sato
a2c4938b03 not set HPCFB_SWAP_BYTE 2001-06-11 09:36:44 +00:00
sato
c1922a2158 not set HPCFB_SWAP_BYTE. 2001-06-11 09:21:15 +00:00
enami
1c426d533e make GENERIC compile again. 2001-06-11 06:11:01 +00:00
enami
48a9b87617 Move some struct definition into header file. 2001-06-11 06:04:55 +00:00
enami
79524e25e0 - add comment about start address of PMU in vr4122. 
- wrap long line.
- add regsiter offset found in PMU of vr4122.
 2001-06-11 06:02:21 +00:00
enami
d011344fca Cosmetic changes; lineup some struct members. 2001-06-11 05:56:21 +00:00
enami
1898d1dcc6 - make this file compile even if either hpcfb or vrkiu isn't included. 
- introduce new cpp symbol VR_FIND_DRAMLIM not to probe dram beyound this.
  for example, MP-C303 hangs hard if memoy beyond 0x03800000 is probed.
 2001-06-11 05:52:21 +00:00
enami
f81775f030 Cosmetic changes. 2001-06-11 05:24:06 +00:00
enami
2bcc128c2b Print space after colon. 2001-06-11 05:22:10 +00:00
enami
3dabdff631 Cosmetic changes: 
- Use tab instead of many spaces
- options<SPC><TAB>
 2001-06-11 05:17:45 +00:00
sato
9d87ee4b59 add MC-R700, 730 touch panel parameter 2001-06-10 12:37:43 +00:00
chs
821ec03ed9 replace vm_map{,_entry}_t with struct vm_map{,_entry} *. 2001-06-02 18:09:08 +00:00
enami
f998b62e15 Fix commnet; hpcmips isn't x86 architecture. 2001-05-31 02:30:04 +00:00
lukem
d84d2c6c85 add missing #include "opt_kgdb.h" 2001-05-30 15:24:23 +00:00
mrg
67afbd6270 use _KERNEL_OPT 2001-05-30 11:57:16 +00:00
chs
e44e9dec8a replace vm_page_t with struct vm_page *. 2001-05-26 21:27:02 +00:00
uch
7fd9577e9e fix WSDISPLAYIO_PUTCMAP bug. 2001-05-21 18:37:30 +00:00
enami
6ae30e0e6e Don't touch GIU{USE,TERM}UPDN_REG_W if ONLY_VR4122 is defined. 
XXX ... for now.  better way is needed.
 2001-05-18 01:41:39 +00:00
enami
c7db455f32 Fix fomula to calcurate TClock; TClock = VTClock / tdiv, not PClock / tdiv. 
The manual is inconsistient about this.
 2001-05-17 13:10:46 +00:00
enami
c74dc48133 Use VRIP_SIU_ADDR instead of 0x0c000000 for base address of serial console 
or kgdb connection.
 2001-05-17 06:00:22 +00:00
enami
f2649e3000 Include opt_vr41xx.h and vrcpudef.h 2001-05-17 05:25:32 +00:00
sato
e82d2d52c6 vr4122 releted definition. 2001-05-17 05:04:30 +00:00
enami
fb619e9a70 Calc. cpu speed for VR4122. 2001-05-16 10:49:18 +00:00
takemura
b8cf6af7cb Fix description about frame buffer type. 2001-05-12 10:08:59 +00:00
shin
6fbde674dd don't define TAILQ_EMPTY here. TAILQ_EMPTY is defined in <sys/queue.h>. 2001-05-09 11:57:05 +00:00
uch
5dd9fe4aa5 set allocatable PCMCIA I/O space size. 2001-05-08 18:08:02 +00:00
takemura
54d9a46bbc Vrc4172 GPIO support. This device is currently configured on PenCentra 130. 2001-05-06 14:25:15 +00:00
hubertf
b866d429c1 vlan does not belong to group of IPv6 pseudo-devices 2001-05-06 01:54:19 +00:00
takemura
4cfc3259b6 Add entry for 'PenCentra 130'. 
The version number is '1.17.5 2001.05.05'.
 2001-05-05 14:42:41 +00:00
takemura
a44e218942 Fix Makefile to generate dummy pbsdboot/opt_spec_platform.h, which will 
be created by config(8) when you compile kernel. And update binary files.
The version number is '1.17.4 2001.05.05'.
 2001-05-05 08:26:11 +00:00
takemura
83a1287ab0 Add wrapper header files. 2001-05-05 08:14:21 +00:00
shin
66ff05bcae change maxusers 8 -> 10. 
without this change, 'make build' will fail.
 2001-05-05 05:04:27 +00:00
scw
2963ff5c58 Add l_poll' to struct linesw' and provide an xxxpoll() entry point 
in each tty driver to indirect through it.

This allows tty line-disciplines to handle poll(2) system calls.
 2001-05-02 10:32:08 +00:00
takemura
a8304325bf Fix 'busname' to attach nodes correctly. 2001-05-01 00:25:16 +00:00
takemura
26b0905dd0 Machine independent GPIO interface. 2001-04-30 11:42:17 +00:00
uch
f0df5e196f delete noisy debug message. 2001-04-24 17:09:54 +00:00
thorpej
e553a6caf0 Do the first allocsys() pass (the pass that computes sizes) before 
calling pmap_bootstrap(); pmap_bootstrap() needs some of the size
information computed by allocsys().
 2001-04-24 15:41:38 +00:00
thorpej
1c3a62e066 Sprinkle pmap_update() calls after calls to: 
- pmap_enter()
- pmap_remove()
- pmap_protect()
- pmap_kenter_pa()
- pmap_kremove()
as described in pmap(9).

These calls are relatively conservative.  It may be possible to
optimize these a little more.
 2001-04-24 04:30:50 +00:00
thorpej
079c2e0ac9 Call pmap_bootstrap() before calling uvm_pageboot_alloc(), so that 
the kernel virtual address space bounds will be set up.
 2001-04-23 23:50:22 +00:00
sato
25bed1d297 fix memcpy argument in SPEC_PLATFORM&BOOT_STANDALONE case. 2001-04-23 11:31:15 +00:00
sato
40e5d08ed9 set specified platid when BOOT_STANDALONE & SPEC_PLATFORM=xx specified. 2001-04-23 10:13:02 +00:00
thorpej
5871b80f00 Use uvm_pageboot_alloc() for early memory allocation, rather than 
calling pmap_steal_memory() directly.  On these platforms, since
uvm_pageboot_alloc() is a wrapper around pmap_steal_memory(), there
is no functional change.  This is merely for API consistency.
 2001-04-22 18:21:48 +00:00
shin
2d7f52d2c7 add Serial Line IP (sl). 2001-04-22 02:06:34 +00:00
shin
22b4360d24 add config files for installation. 2001-04-22 02:01:43 +00:00
sato
5c43977ed6 - fix comment for MCR/530. 
- add MCR/530A(MobilePro780) PWCTL_COM0 device.
- add MC-R520A(MobilePro770) BTN_COVER device,
   but commented because of no checking.
- add MC/R530A(MobilePro780) BTN_COVER device,
   but commented because of no checking.
 2001-04-21 15:56:55 +00:00
sato
9804ab7c49 add VR4181 vrip register maps. 
add VR4181 vrip intr levels.
 2001-04-21 14:46:36 +00:00
sato
05c9ce0788 add VR4181 BCU register definitions. 
add routines for VR4181.
 2001-04-21 14:44:40 +00:00
sato
a797d869ed dump io setting: DPRINTF->VPRINTF 2001-04-21 10:32:38 +00:00
sato
355c78fa22 enlarge MSGBUFSIZE for -v option. 2001-04-20 12:08:45 +00:00
sato
f3f40df128 options<TAB><TAB> -> options<SPACE><TAB> 2001-04-20 12:07:49 +00:00
sato
12a0a0a537 - support VR4122 vrip register map. 
- support VR4122 ICU register map.
- support VR4122 intr levels.
XXX: currently if 'options VR4122' is defined,
XXX: cannot specify 'options VR4121','options VR4111', 'options VR4102'.
XXXX: i have not the VR4122 based hardware.. so no check for VR4122.
 2001-04-18 11:07:26 +00:00
sato
553d85e2d4 missing includes in last commit (rev1.6->1.7). 2001-04-18 11:00:30 +00:00
sato
d4262d1ab3 use VRIP_CMU_ADDR in vr/vripreg.h 2001-04-18 10:48:58 +00:00
sato
9d92917cd6 check platid if 'options VR41XX' and 'options TX39XX' are both defined. 
XXX: currently this case is missconfiguration and not compilable.
XXX: because all codes are not supported this case yet.
 2001-04-18 10:42:39 +00:00
sato
cdc83120a7 fix SINGLE_VRIP_BASE condition. 2001-04-17 15:45:20 +00:00
takemura
a8106b2b59 Fix typo. kbdparam.h -> kdbparam.h. 
RP12685
 2001-04-17 15:19:41 +00:00
sato
97683d27ae - definition for vr cpu identify. 
- definition for vr cpu group identify.
 2001-04-17 11:13:16 +00:00
sato
00ec577a8e add VR4122 specified register definitions. 
XXX: vrip.c is not yet supported VR4122.
 2001-04-16 09:55:56 +00:00
sato
8a19f18c0b fix typo in comment. 2001-04-16 09:17:05 +00:00
kleink
f06533a1ee Add definitions of C99 integer format conversion macros. 
XXX Fastest minimum-width integer types haven't been decided upon yet.
 2001-04-15 17:13:04 +00:00
kleink
739cb75837 Add definitions of C99 specified-width integer type limits. 
XXX Fastest minimum-width integer types haven't been decided upon yet.
 2001-04-15 15:29:02 +00:00
takemura
60f9754d4b Add __COMPILER_UINT64__="unsigned __int64" syncing with the change 
of arch/mips/include/int_types.h, revision 1.4.

The version of the binaries are '1.17.3 2001.04.15'
 2001-04-15 10:10:43 +00:00
kleink
cdcf9f46c5 Add definitions of C99 integer constant macros. 
Tidy Makefiles up a little.
 2001-04-14 22:46:19 +00:00
kleink
a7c20e5788 Add definitions of C99 integer constant macros. 2001-04-14 22:38:33 +00:00
kleink
7affdab52e Add definitions of C99 minimum-width and greatest-width integer types. 
XXX Fastest minimum-width integer types haven't been decided upon yet.
 2001-04-14 12:19:49 +00:00
thorpej
bf2dcec4f5 Remove the use of splimp() from the NetBSD kernel. splnet() 
and only splnet() is allowed for the protection of data structures
used by network devices.
 2001-04-13 23:29:55 +00:00
itojun
fbc07662f5 $NetBSD$ tag cleanup 2001-04-13 08:11:44 +00:00
itojun
eb0cfc6af5 s/$Id$/$NetBSD$/ 2001-04-13 08:09:07 +00:00
thorpej
316dcc474b splvec.splimp -> splvec.splvm 2001-04-12 19:21:20 +00:00
sato
5dd91b669c add VR4101 specific BCU registers. 
add VR4122 specific BCU registers.
add cpu specific comments.
 2001-04-11 08:52:59 +00:00
sato
68d21310de opt_vr41x1.h -> opt_vr41xx.h. 
add 'options VR41XX' and kill 'options VR41X1'.

add 'options VR4101' (not yet supported)
add 'options VR4102'
add 'options VR4111'
add 'options VR4121'
add 'options VR4122' (not yet supported)
add 'options VR4181' (not yet supported)
these are for config level size optimization.
currenty, no optimization codes are exist.
NOTE: there are some incompatibility in VR4181 & VR4101 &
VR4102,4111,4121 group & VR4122.

GENERIC (for VR41XX series) has options VR4102, VR4111, VR4121.
 2001-04-11 08:23:26 +00:00
wiz
14dbdf5518 Negative exit code cleanup: Replace exit(-x) with exit(x). 
As seen on tech-userlevel.
 2001-04-06 11:13:45 +00:00
sato
6601895830 add vrc4172pwm for MC-R510, MC-R520. 2001-04-03 09:02:24 +00:00
uch
c5496871db fix comment. 2001-03-30 15:59:17 +00:00
sato
6c5da9bd76 o Change initialization for config_hook() base lcd control. 
o Fix backlight control in case that light is controlable but not be
  able to get status.
o change some verbose prints.
 2001-03-26 09:40:45 +00:00
sato
887d70ab8f CONFIG_HOOK_GET support for get current port status. 2001-03-26 08:57:02 +00:00
uch
ed26af9e66 recognize hpcboot.exe's ELF symbol table. 2001-03-25 15:15:18 +00:00
takemura
44e4c53338 Add MQ200_USECRT option, which enables CRT output on MC/R530. 
This is kernel configuration option and you can't enable and disable CRT
dynamically for now.
 2001-03-25 13:06:52 +00:00
sato
c5956b89f8 change backlihght parameter value type to int8_t. 2001-03-24 16:08:36 +00:00
sato
8c78f7fad3 add vrc4172pwm for MC/R520A(MobilePro770) 2001-03-24 15:56:59 +00:00
sato
1907b28be1 add MobilePro770(MC/R520A) parameters. 2001-03-24 15:53:37 +00:00
sato
8f5f11180a o add sysctl machdep.booted_kernel support. 
o add sysctl machdep.root_devoce support.
 2001-03-23 11:09:49 +00:00