thorpej
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
pk
ec34e18063
Don't map sbus `registers' on sun4c (i.e. sbus @ mainbus); it's almost
...
certainly not the control space we want..
1998-09-20 20:08:52 +00:00
pk
0a6347a24d
Provide an error entry point like sbus and memory.
1998-09-19 16:45:43 +00:00
pk
812eb8c1da
Add %b format strings.
1998-09-19 16:44:59 +00:00
pk
25d48215a2
Map Sbus control registers.
1998-09-19 15:49:50 +00:00
pk
8381b55bd7
Add a bunch of SBus control register definitions.
1998-09-19 15:48:55 +00:00
pk
e21c0b3450
Need to cast sbus attach `prom_vaddrs' field.
1998-09-07 07:15:51 +00:00
pk
c4c4e35608
Undo last change (we're passing the address of a pointer here).
1998-09-07 07:11:11 +00:00
eeh
484ce04810
The `address' field from the prom is really an unsigned 32-bit value.
...
Make it so.
1998-09-05 22:29:49 +00:00
eeh
5dc93bd9fe
Remove function naming conflict.
1998-09-05 22:15:51 +00:00
pk
b39d7e33be
Assign my copyrights to TNF.
1998-09-05 15:42:41 +00:00
pk
2c9a80baf4
Assign my copyrights to TNF.
1998-09-05 14:01:08 +00:00
pk
6f2539f8a6
getpropA() => getprop().
1998-08-30 21:26:46 +00:00
pk
fe6b9295a8
Adjust for some small changes in lsi64854 back-end driver.
1998-08-29 21:43:00 +00:00
pk
e4091cb757
Split `esp' driver and DMA engine into separate front-end files.
...
The Sbus front-ends have all been moved to `sys/dev/sbus', while
the `obio' front-ends remain here.
1998-08-29 20:49:35 +00:00
pk
1f0567dd53
Nuke unnecessary header files.
1998-08-29 20:38:38 +00:00
pk
8e0c62893c
Remove cache flush from dma_espintr(); the bus dma routines take care
...
of that now. Hence we no longer need <sparc/cpuvar.h>.
1998-08-28 20:14:36 +00:00
pk
ca868d7da6
Specify our boundary restriction when allocating DMAble memory.
1998-08-28 20:07:52 +00:00
pk
f6a208ce6b
Nuke Dprintf; fix formats.
1998-08-28 08:57:38 +00:00
mrg
82571f5403
move isp sbus attachment to dev/sbus
1998-08-27 11:41:24 +00:00
pk
c6905522d2
These files are no longer used.
1998-08-24 07:23:10 +00:00
pk
66795e62e7
Move sparc_vme_dmamem_map() outside `#ifdef SUN4M'
1998-08-23 10:40:38 +00:00
pk
2a6be00de5
Rename DVMA constants.
1998-08-23 10:05:53 +00:00
pk
666587112f
Use bus_dmamem_{alloc,free} instead of the old VM hack.
1998-08-23 10:04:56 +00:00
pk
f318f15bc3
Convert to [pv]addr_t.
1998-08-21 14:07:37 +00:00
pk
363b678b9e
Flesh out more of the sun4 busdma functions.
1998-08-20 20:46:59 +00:00
augustss
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
mycroft
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
mycroft
129cbf95ee
Minor edit.
1998-08-15 05:16:41 +00:00
mycroft
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
mycroft
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
eeh
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
mjacob
5ad5bb35af
minor change to make the message less linux like
1998-08-12 00:03:23 +00:00
pk
a0818b4b8b
Use bus_dmamem_alloc/bus_dmamem_map.
1998-07-31 22:21:35 +00:00
pk
519f1f7f0e
Convert to bus dma.
1998-07-31 15:53:11 +00:00
pk
c206cad36e
Convert to bus_dma.
1998-07-31 12:45:48 +00:00
thorpej
ecf815f930
Back out previous; it is perfectly reasonable, and desirable, to print out
...
debugging info ifdef DEBUG.
1998-07-31 02:10:12 +00:00
mjacob
36f9ab27ce
>We're not Linux. If we still want driver version strings to be displayed
...
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
1998-07-31 01:56:49 +00:00
pk
af89712b25
Use bus_dma_*() instead of dvma_mapin/dvma_mapout.
1998-07-30 22:42:04 +00:00
pk
32a5557426
Adapt to changes in the base bus_dma* functions.
1998-07-30 22:29:34 +00:00
pk
741c837f77
Get to DMA map functions through parent tag, instead of calling some base
...
functions directly.
1998-07-30 18:54:06 +00:00
pk
9104b183fa
Lots of things have moved to <dev/sbus/sbusvar.h>
1998-07-29 18:45:57 +00:00
pk
402a052405
Deal with sbus attach args changes.
1998-07-29 18:44:22 +00:00
pk
9e4d2f9b53
Switch to new sbus attach arguments layout.
1998-07-29 18:42:32 +00:00
pk
58d952ce7d
Deal with sbus attch args changes.
...
Use sbus_destroy_attach_args().
1998-07-29 18:37:23 +00:00
pk
426330f642
We no longer need to get the register sets by ourselves.
1998-07-29 18:36:08 +00:00
pk
718ff722b7
In the reset() function, preserve the current cable selection bit.
...
If in auto media select mode, this avoids losing carrier every time
the lance code decides to re-initialize.
1998-07-29 16:10:57 +00:00
pk
cc0d537633
GC.
1998-07-28 14:04:08 +00:00
pk
14f4493376
Magma driver has been moved to <dev/sbus>.
1998-07-28 00:19:22 +00:00
pk
4ca3b5c079
We no longer use these.
1998-07-28 00:06:23 +00:00
pk
3d9b1710a7
This file is now in dev/sbus.
1998-07-28 00:05:41 +00:00
pk
c7a2e942b0
Split the `le' driver front-ends into separate files.
...
The sbus and lebuffer front-end have moved to dev/sbus.
1998-07-27 23:59:11 +00:00
pk
eec66e52bd
Get headers from <dev/sbus>
1998-07-27 22:34:48 +00:00
pk
d1f03e068a
<sparc/dev/sbusvar.h> => <dev/sbus/sbusvar.h>
1998-07-27 19:32:42 +00:00
pk
db822a6c0a
These files are now in <dev/sbus>.
1998-07-27 19:17:50 +00:00
pk
e92f09b2b7
SBU_BURST_* are now in <dev/sbus/sbusvar.h>
1998-07-27 19:16:49 +00:00
mrg
c5e180526b
these have moved to sys/dev/sbus.
1998-07-27 05:48:42 +00:00
pk
c6124a986a
This file is no longer used.
1998-07-25 22:19:25 +00:00
pk
91f18e727f
Remove conditionals on SUN4C+SUN4M.
...
A few cosmetic changes.
1998-07-24 21:08:16 +00:00
drochner
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
thorpej
9df67db949
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:18:38 +00:00
mjacob
99ff11f6b7
locking now out of main framework for isp_reset/isp_init
1998-07-18 21:02:06 +00:00
mjacob
bc355c6b3f
new framework
1998-07-15 19:59:45 +00:00
jonathan
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
jonathan
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
jonathan
dbe5213b11
Split arch/sparc/dev/amd7930.c into:
...
* MI sys/dev/ic/{am7930.c,am7930var.h} chipset driver
* sparc frontend.
Presere revision history (this time).
TODO: bus.h'ify, and padded register mappings.
1998-06-24 11:09:23 +00:00
pk
3f6155e843
Update from Iain for the parallel port stuff.
1998-06-07 21:14:17 +00:00
thorpej
1c6a275e9c
Only attempt the powerdown if the power register was mapped.
1998-06-06 21:40:20 +00:00
mrg
ff6c535817
sync with other md_root.c files.
1998-06-06 05:12:54 +00:00
mrg
428a0d387a
remove old (now broken) memory disks hooks code.
1998-06-05 15:00:10 +00:00
mrg
135e6dc7e0
make this work with new md root stuff.
1998-06-05 14:57:55 +00:00
pk
87fe4d9ea1
Update from Iain on the parallel port stuff.
1998-06-03 22:38:31 +00:00
pk
229ff62ff7
Do not assume that a parallel component is always configured.
...
Squash compiler warnings if MAGMA_DEBUG is on.
1998-05-20 22:08:10 +00:00
pk
4e62cce89a
Magma SBus serial & parallel port driver from Iain Hibbert.
1998-05-19 23:58:54 +00:00
kleink
d2db996158
Fix some arithmetics lossage on typeless pointers.
1998-05-07 21:13:23 +00:00
chs
8cacea4ea0
fix a timing problem with polled output on sun4c's.
1998-04-23 04:06:17 +00:00
pk
90b5c246c6
Skeleton code for the SBus expander box.
1998-04-18 19:00:17 +00:00
pk
98e9f557c2
No need to export bus_intr_establish().
1998-04-07 20:43:58 +00:00
pk
beb02e6b82
Use bus space methods to implement the vme bus space functions.
1998-04-07 20:21:55 +00:00
pk
b333d0bb62
The bus space functions now take care of "pass-through" methods.
1998-04-07 20:20:03 +00:00
pk
fbc1fe8213
bus_space_mmap() has changed to take a `bus_space_handle_t *' argument,
...
like other bus space methods.
1998-04-07 20:18:17 +00:00
pk
3f455e21d9
The bus space functions now take care of "pass-through" methods.
1998-04-07 20:11:54 +00:00
pk
e3e74bd0d5
Factor out bus code into separate files.
1998-03-31 21:05:04 +00:00
pk
be4108fec1
Replace direct `sparc_bus_map()' calls with bus space map method.
1998-03-30 14:21:38 +00:00
mycroft
d4da63c6c3
Eliminate cs_heldchar. It is not necessary in my version of the driver.
1998-03-30 02:41:21 +00:00
pk
b782c3448c
obio_bus_probe() => bus_space_probe()
1998-03-29 22:10:32 +00:00
pk
2ad26b801c
Fill in the bus tag's `bus_space_unmap' method.
1998-03-29 22:06:58 +00:00
pk
82663a0330
Implement `_obio_bus_map()' and insert it into the obio bus' bus tag.
...
Remove obio_bus_probe().
1998-03-29 22:05:05 +00:00
pk
f658122053
Check for a valid PROM virtual address.
1998-03-25 23:15:07 +00:00
pk
23521d1c5f
Fix yank-and-put error in sbus attach code.
...
Misc. cleanup.
1998-03-23 17:37:04 +00:00
pk
4730d097ad
Only print interesting interrupt levels.
1998-03-23 17:21:52 +00:00
pk
279df61dbe
Fill in the pointers the MI back-end expects correctly.
...
Add comment and diagram explaining the memory layout (to be revisited..).
1998-03-22 22:12:52 +00:00
pk
405ec57e9f
Lift the tilde a bit.
1998-03-22 20:24:05 +00:00
pk
e6a2630760
Direct the Sbus bus map function through the bus tag.
1998-03-21 22:03:33 +00:00
pk
681b358c19
Account for bus_space(9)-style bus attachment scheme.
1998-03-21 20:30:49 +00:00
pk
232fa45996
Add bus tags to softc.
1998-03-21 20:29:57 +00:00
pk
a21d934940
Add bus tags.
...
Add interrupt chaining facility (currently used for `le'; the `esp'
device should follow).
1998-03-21 20:28:44 +00:00
pk
087da728f2
Add bus tags to softc.
1998-03-21 20:25:12 +00:00
pk
c99d62cc8a
Account for changed bus attachment scheme.
1998-03-21 20:23:38 +00:00
pk
be7f5a7031
Switch to a bus_space(9)-based device attachment scheme.
...
The dma & lebuffer devices behave like busses to accommodate the
OBP layout. For practical purposes, they are implemented as
Sbus "extensions".
1998-03-21 20:23:09 +00:00
pk
69fe6f242f
Account for changed bus attachment scheme.
1998-03-21 20:11:30 +00:00
pk
165120cfaf
Sbus attach arguments and map function prototypes go here.
1998-03-21 20:10:07 +00:00
pk
77f499595c
Switch to a bus_space(9)-based device attachment scheme.
...
- device attachment arguments contain bus-specific
address and interrupt levels.
- devices must call back on bus map functions to get their
addresses and interrupt levels translated properly.
- sun4m's obio bus is treated like an Sbus slot.
- the sun4-style obio bus has its own attach arguments
and map functions.
1998-03-21 19:55:31 +00:00
pk
73f387899e
#define several register bank offsets, so we don't need to refer to
...
structure fields.
1998-03-21 19:45:45 +00:00
pk
83cec33afc
Split the fb_setsize() utility in two separate functions: one to be
...
used by OBP machines and another one for sun4/eeprom machines.
1998-03-21 19:42:00 +00:00
pk
d22f956657
Remove `_NEW_I82586'.
1998-02-28 01:15:51 +00:00
mrg
d90485202c
- add defopt's for UVM, UVMHIST and PMAP_NEW.
...
- remove unnecessary UVMHIST_DECL's.
1998-02-10 14:08:44 +00:00
pk
334b20bbd6
Define a `DMA_FLUSH' macro; dma chip revs 0 & 1 have a different bit
...
to reset the internal state engine.
1998-02-07 22:41:27 +00:00
chs
abf50cf8c3
add UVM stuff.
1998-02-07 17:28:18 +00:00
pk
0725302eac
vme_bus_probe() takes an `offset' argument.
1998-02-06 00:22:41 +00:00
pk
86f595fb3e
This file has been moved to dev/vme a while ago.
1998-02-05 22:14:35 +00:00
mrg
5e91ce6ef1
initial import of the new virtual memory system, UVM, into -current.
...
UVM was written by chuck cranor <chuck@maria.wustl.edu>, with some
minor portions derived from the old Mach code. i provided some help
getting swap and paging working, and other bug fixes/ideas. chuck
silvers <chuq@chuq.com> also provided some other fixes.
this is the sparc portion.
this will be KNF'd shortly. :-)
1998-02-05 07:57:48 +00:00
pk
90be3b559d
Use vme_bus_probe() in si_attach().
1998-02-04 20:50:47 +00:00
thorpej
8abe76d2f0
Add offset and length parameters to bus_dmamap_sync(), used for specifiying
...
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
thorpej
99cc8482d1
Change the last argument of bus_dmamap_sync() from bus_dmasync_op_t to int,
...
and allow more than one synchronization operation to be specified in
a single call. Dissallow mixing of PRE and POST operations.
1998-02-04 01:57:27 +00:00
pk
bee3aa34cc
Account for changed vme_bus_probe() arguments.
1998-02-04 01:04:48 +00:00
pk
f060ed68ba
sparc_vme_probe(): handle callback argument.
1998-02-04 01:01:14 +00:00
thorpej
2538ed1062
Use offsetof() from libkern.h
1998-01-28 02:23:04 +00:00
pk
72f0ab269f
These drivers are now in dev/vme.
...
The `ie' driver has been split in a VME and OBIO front-end. The latter
lives on in this directory as `if_ie_obio.c'
1998-01-25 20:33:54 +00:00
pk
531a4b2d77
sparc/obio bus front-end to the i82586 driver.
1998-01-25 19:50:50 +00:00
pk
8bc346d14a
All VME stuff is gone from here.
1998-01-25 19:44:43 +00:00
pk
d44f401c95
bus_tmp() => obio_bus_tmp()
1998-01-25 16:49:33 +00:00
pk
333b6319fc
Convert to new VME interface.
1998-01-25 16:38:01 +00:00
pk
4efb52487a
Split si & sw attach routines, and make the si part use the new VME interface.
1998-01-25 16:37:08 +00:00
pk
f8ba1e0bd9
sparc/VME bus implementation.
1998-01-25 16:06:25 +00:00
mrg
c71457ab4a
KNF, and use splzs over splhigh in one place.
1998-01-21 05:54:39 +00:00
thorpej
1adb4489a6
Update for changes to config.
1998-01-12 20:23:38 +00:00
mrg
7069ab9961
don't call fb_unblank if NFB < 0
1998-01-08 10:56:36 +00:00
perry
015e898c02
RCSID Police.
1998-01-05 07:02:46 +00:00
chuck
d76941843e
fix mixer code that was clearly untested:
...
- allow get/set of enums SUNAUDIO_SOURCE and SUNAUDIO_OUTPUT rather
than returning EINVAL
- add missing SUNAUDIO_MONITOR_CLASS case in query_devinfo
- convert SUNAUDIO_MONITOR case from a MIXER_CLASS to a MIXER_VALUE
like it is supposed to be
- the labels for outputs/record class were swapped: fix it
this patch allows "mixerctl" to work properly on a sparc
1997-12-06 03:20:56 +00:00
mjacob
40ef7dd007
handle case of no keyboard configured
1997-12-03 22:32:05 +00:00
pk
ff4f5f4528
If necessary, defer console output until TX interrupt handler runs.
1997-11-12 22:18:54 +00:00
mycroft
9e82e84056
Handle CDTRCTS, for silly Mac-like connector on some models (e.g. IPX).
1997-11-03 11:33:17 +00:00
mycroft
ec5fd4954e
Set rr0_dcd.
...
Don't set DCD_IE and CTS_IE here; let the MI code do it.
Handle MDMBUF.
1997-11-02 08:05:06 +00:00
gwr
aa67eda78f
Correct zs_unit in zs_kgdb_init().
...
Similar problem as zs.c:consinit().
1997-10-22 17:03:35 +00:00
gwr
9053a6f401
Correct the values of zs_unit in consinit(),
...
so ddb will work on the keyboard/display.
1997-10-22 14:39:38 +00:00
pk
004f196dcf
Nuke 5.25 inch formats.
1997-10-19 23:29:47 +00:00
pk
a0d6bae726
Add an odd-ball japanese floppy format (PR#2903).
...
A good time to get rid of the hard-coded floppy sector size.
1997-10-19 22:29:21 +00:00
christos
7507e6a5e9
Make this compile again.
1997-10-19 20:34:54 +00:00
augustss
e7029fc0da
Make the audio API (almost) SunOS compatible.
...
The changes is to allow some limited mixer manipulation through
the audio device (instead of the mixer device).
This rendered 4 methods in audio_hw_if unused so garbage collect these.
1997-10-19 07:41:33 +00:00
gwr
0308bf1ac6
Use common zs code.
1997-10-17 23:59:44 +00:00
mycroft
b328298e4c
Fix up includes.
1997-10-16 10:49:00 +00:00
mycroft
3081c6f8cf
AudioC[A-Z] -> AudioC[a-z]
...
AudioElinear -> AudioEslinear
1997-10-11 12:43:51 +00:00
jtc
4229acf79d
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 08:37:20 +00:00
thorpej
3b4ad2b60e
Copyright assigned to The NetBSD Foundation.
1997-10-05 18:15:51 +00:00
pk
dc4f93c2a1
Collect sbus status and configuration registers in `struct sbusreg'.
1997-09-14 19:17:25 +00:00
pk
c635b25325
In kbdattach() (the pseudo-device attach routine) wait for the keyboard
...
reset sequence to complete. Just sending the reset command and rushing
off -- like it used to do -- might cause the keyboard's response to get
lost in case the remaining kernel initialization decides to interact
with the console (RB_ASK!) by calling cngetc(), which goes off polling
within the PROM.
1997-09-13 19:12:18 +00:00
pk
0bd088474a
Turn on D_DSBL_WRINVAL on `ledma'.
1997-09-09 20:54:48 +00:00
pk
84877e89f6
Allow a BREAK to cause a kgdb_connect().
1997-08-31 21:26:37 +00:00
augustss
a79408b6c7
Change match routine to use "audio" as the ROM name.
1997-08-27 22:42:23 +00:00
augustss
c58d387b0f
Fix prototype for amd7930_set_params.
1997-08-27 22:33:59 +00:00
bouyer
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
augustss
6616d47838
- Change audio_hw_if a little: set_param now sets the play and record modes
...
at the same time instead by using two different calls. This enables
it to check more easily if the combined mode is all right.
- Improve the error checking in audio.c.
- Add a new audio property, AUDIO_PROP_INDEPENDENT, show if the
play and record settings are independent.
- Fix some buglets in audio.c.
1997-08-24 22:31:23 +00:00
augustss
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
mjacob
419960bd0e
Changes for PCI Qlogic ISP2100 meant a few minor changes.
1997-08-16 00:33:04 +00:00
pk
dd07701791
Do not use `rasterconsole' by default on this framebuffer.
1997-08-07 19:12:30 +00:00
augustss
658656bb99
Audio changes:
...
- Change the way attach and open works to allow multiple audio
devices.
- Split the mulaw.c file into two to avoid dragging in mulaw
convertsion when they are not needed. Add 16 bit alaw/mulaw tables.
- Change the way audio properties are gotten.
- Recognize more versions os SoundBlaster.
1997-07-31 22:33:08 +00:00
fair
fc96112975
fix editing boo-boo
1997-07-29 17:55:38 +00:00
fair
4c351f243e
%x -> 0x%x
1997-07-29 09:58:04 +00:00
augustss
a63034762b
Audio: Remove the machine dependant code I put in audio.c by mistake.
...
This adds another method to audio_hw_if. Also remove a field from
audio_hw_if that was not read-only.
1997-07-28 20:56:05 +00:00
augustss
d58bc6796f
audio: Simplify handling of AUDIO_SETFD and committing of encoding mode.
1997-07-27 23:51:48 +00:00
augustss
9745684ebe
Changes to the sudio system:
...
- It is now possible to handle devices that want "looping" DMA,
e.g. the SoundBlaster correctly. The WSS and SB drivers use this.
To do this several new methods were introduced in audio_hw_if.
- Different silence handling (forced by previous change).
- The audio driver can now be mmap()-ed, but due to problems in
the VM system only for writing for now.
- The OSS (Linux) audio emulation takes advantage of some of the
new features.
1997-07-27 01:16:32 +00:00
pk
0e6ca8da9f
Use `target selection with DMA' by default.
1997-07-19 21:57:01 +00:00
pk
63fa13065c
#include "locators.h"
1997-07-19 21:43:54 +00:00
jtk
ca1bba150a
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 03:16:39 +00:00
jtk
9388f271a9
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 02:12:50 +00:00
pk
af86c62d61
Get console tty size from raster console if applicable.
1997-07-07 23:30:22 +00:00
pk
3c1b9ba29b
Install media functions only if something useful can be returned.
1997-07-07 16:28:44 +00:00
thorpej
7c03f46228
Don't print a warning if the returned transfer count is less than 0.
...
This can happen during perfectly normal operation if:
(a) We are using DMA to select a target, and
(b) we are interrupted by another target reselecting us.
Per discussion with Paul Krannenburg.
1997-06-26 00:31:20 +00:00
thorpej
cf016f61f4
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:56:28 +00:00
pk
f9d3344f9c
xysize(): only call xyopen()/xyclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:47:00 +00:00
pk
4269e0eab1
xdsize(): only call xdopen()/xdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:45:03 +00:00
pk
1ab49e584f
Avoid "false positives" in match routines.
1997-06-10 20:59:10 +00:00
pk
2851bca951
vme_establishintr: remove SUN4 arch check; this now works on sun4m as well.
1997-06-10 20:57:48 +00:00
thorpej
38b9b3385b
Update for changes in the core ISP driver.
1997-06-08 06:35:45 +00:00
pk
7de2a6f83d
Use the `ranges' property to deal with VMEbus address spaces.
1997-06-07 19:16:23 +00:00
pk
af40331aec
Add some VME address modifiers used by vmebus_translate().
1997-06-07 19:10:57 +00:00
pk
d7b698b984
Set `rr_iospace' to PMAP_OBIO when translating relative sbus addresses.
1997-06-01 22:10:39 +00:00
pk
ec02e14ae2
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:16:06 +00:00
pk
3137152cb5
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:16:04 +00:00
pk
954e31e49a
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:16:02 +00:00
pk
821f712972
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:15:58 +00:00
pk
fb5c729d4a
Use `rr_iospace' to track the MMU page type bits. On sun4c/sun4m the
...
iospace value is always learned from the PROM; on sun4, we infer it
from the BUS_* parameters.
This obsoletes the `bustype' argument in bus_tmp().
1997-05-24 20:08:41 +00:00
pk
ae61406a77
Replace bus_tmp() by mapdev() equivalent.
1997-05-19 19:59:36 +00:00
pk
f88bf0a6e9
Replace bus_tmp() with mapdev() equivalent.
1997-05-19 19:56:26 +00:00
pk
c0036ae48d
Remove bus_tmp(); it's just a special case of mapdev().
1997-05-18 21:26:22 +00:00
pk
18a4aeea23
A bit of framework for sun4m VME busses.
1997-05-18 19:37:37 +00:00
pk
72d640a497
Tweak gain curve (from nsayer@kfu.com; PR#2909)
1997-05-15 22:32:56 +00:00
augustss
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
augustss
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
pk
a05df4e228
* finish off support for the 82077 chip as found on sun4m machines.
...
* add non-dma mode bit to `specify command', so formatting disks starts
working (thanks to Jeremy Cooper for finding out about this).
1997-05-02 13:03:44 +00:00
augustss
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
pk
547d95a029
Remove esp FLUSH when residual bytes are present in FIFO, the ncr53c9x
...
driver will flush when necessary. Doing the FLUSH here interferes
with DMA-enabled target selection.
1997-04-27 22:12:40 +00:00
pk
2357b53997
Avoid race for the chip's interrupt pending status bits in zscnputc()
...
by introducing a single-character queue to defer kernel console output
until the transmitter interrupt handler runs.
1997-04-14 21:26:28 +00:00
mrg
bb07095632
as per discussion with torek, allow TC=1. also add option
...
to allow TC=0. the zilog documentation says not to allow
TC=0 -- however, i tested this and it "does work", as far
as i could tell, so, allow this use if so desired.
1997-04-09 13:15:13 +00:00
pk
cc7899605a
Move "range" property description out of generic `romaux'.
...
Allocate room for this property when needed in bus attachment.
1997-04-08 20:08:20 +00:00
pk
efeeba419f
sun4c and sun4m `aux' register bits differ slightly.
1997-04-07 21:00:34 +00:00
pk
d1603d004b
Use sc_hwreset() hook to reset ledma (if applicable).
1997-04-04 20:29:23 +00:00
pk
cd9e3a7b59
Remove bogon from otherwise unused fdchwintr() function.
1997-03-31 20:27:32 +00:00
pk
f62b65006f
Clamp burst sizes to maximum value of parent.
...
Reset ledma from leattach().
1997-03-23 22:54:26 +00:00
mycroft
7a55cafeeb
Implement set_format.
1997-03-20 16:51:38 +00:00
thorpej
9018eb5208
Use if_media to select media (or autoselect rules) on the Sun4m.
1997-03-17 03:24:26 +00:00
pk
27b2f0ec7c
Fix a `new-ARP' pasto.
1997-03-15 22:13:55 +00:00
is
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
cjs
ca5f101ba7
Remove code that stops transfers of >63K. The Sun 4 doesn't have this
...
limitation, and minphys() is supposed to catch this on other architectures.
1997-03-14 19:57:20 +00:00
cgd
e36a5ca4de
change microcode array definitions from "unsigned short" to the more
...
correct u_int16_t, and remove bogus casts that the old definition
required.
1997-03-13 04:07:44 +00:00
mycroft
919efaeb60
Make the microcode table const.
1997-03-13 03:33:03 +00:00
mycroft
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
cgd
cf26d31ad2
NetBSD RCS ID tweaks, a few comment block tweaks. Also, make copyright
...
notices consistent (per Matt Jacob).
1997-03-12 21:06:41 +00:00
cgd
099e30a322
ISP 10x0 driver from Matthew Jacob of NASA Ames Research Center.
...
(March 12, 1997 version).
1997-03-12 20:44:50 +00:00
pk
d8fc2afd1e
Replace cpumod' with
cpuinfo.cpu_type' equivalents.
1997-03-10 23:01:40 +00:00
pk
3811437545
Redo attach code somewhat. Have a go at matching le's and lebuffer's on
...
machines where the PROM does not provide a parent/child relationship.
1997-03-10 22:58:22 +00:00
pk
9119c9c189
Add a field indicating this instance has attached to an `le', so we
...
can have a go at matching le's and lebuffer's on machines where the
PROM does not provide a parent/child relationship.
1997-03-10 22:56:54 +00:00
thorpej
e33bdc63ae
Update for MI 53c9x driver.
1997-02-27 01:30:05 +00:00
thorpej
5464afa761
Convert the SPARC esp driver to be a front-end for the MI 53c9x driver.
1997-02-27 01:16:19 +00:00
gwr
2de163471e
Minimal changes to adapt to removal of NCR5380_PERMIT_RESELECT.
...
This driver should be updated to allow per-target control over
disconnect/reselect, but I will leave that to the port masters.
1997-02-26 22:29:08 +00:00
thorpej
2525eee053
Use new machine-independent mountroothook code.
1997-01-31 02:15:54 +00:00
thorpej
e256e03227
Arrange the code that sets the options flags such that the user can
...
completely override the defaults (including disabling DMA) in the
kernel config file.
1997-01-23 02:11:23 +00:00
pk
a0f6df960f
RAMDISK_HOOKS => MEMORY_DISK_HOOKS
1997-01-01 23:46:29 +00:00
pk
d5b11782b5
rename: ramdisk => md
1996-12-28 23:27:00 +00:00
pk
bb12d8fd9a
Prevent `unused function' warning (from Robert Evans; PR#2770).
1996-12-23 01:46:30 +00:00
pk
2f296724a8
Not all sun4m's have an `auxio'.
1996-12-10 23:24:56 +00:00
pk
841d1ec634
Comply with recent autoconfiguration changes. Diffs graciously
...
supplied by Chris Demetriou.
1996-12-10 22:54:46 +00:00
thorpej
d502e68402
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
pk
92c4c71040
Finish import of floppy formatting code; not really usable yet, lots of
...
data overruns.
1996-12-10 14:44:53 +00:00
thorpej
ef5333043b
Copyright assigned to The NetBSD Foundation.
1996-12-09 17:46:44 +00:00
pk
837dd8e3e1
Import formatting code from the i386 version.
...
Revise communication between hw & sw interrupt handler.
1996-12-08 23:40:32 +00:00
pk
6b31797b23
Detect `lebuffer' parents and use the provided buffer.
1996-12-06 22:07:59 +00:00
pk
31b46bcf59
Special Lance buffer glue.
1996-12-06 21:52:01 +00:00
pk
b2f875fce9
Handle Sbus burst settings in dma reset().
1996-11-28 10:30:34 +00:00
pk
7e3ef21ca4
Fix typo in D_BURST* macros.
1996-11-28 09:37:34 +00:00
pk
4d21d576ef
Add some `DMA ESC gate array' specific constants.
1996-11-27 21:50:42 +00:00
pk
13ad3421cd
DMA draining macros have moved to dma.c
1996-11-27 21:49:53 +00:00
pk
c7f438cd11
Handle the `ESC gate array' variant of the DMA engine, including an
...
essential bug work-around. Graciously supplied by David Miller.
Also re-arrange the macros that do the dma drain song-and-dance for
better clarity.
1996-11-27 21:48:19 +00:00
pk
c0a9fe4e7a
Cancel any queued timer events before re-scheduling a timeout, so esp_abort()
...
can be called from other places besides the timeout handler.
1996-11-27 21:34:59 +00:00
pk
4526babc82
Pay attention to DMA errors as reported by DMAINTR() returning -1. If this
...
happens reset everything.
Re-schedule a timeout when first attempting to abort an operation.
1996-11-27 21:24:20 +00:00
pk
c1274b3cff
Stabilize timeout values in fdcresult() and out_fdc() by adding delay()s.
...
Noted by Jason Thorpe over in the i386 driver.
1996-11-27 21:14:33 +00:00
pk
3cb63476b7
One control block per target is insufficient if you have a full complement
...
of targets attached and access those simultaneously (like in a ccd(4) array).
We (now) allocate (somewhat arbitrarily) three per target.
Noticed by Marshall Midden.
1996-11-22 22:36:57 +00:00
pk
89b8591c60
Add explicit casts to `%l*' formatted arguments.
1996-11-16 23:14:58 +00:00
thorpej
35c9c776fe
Use bitmask_snprintf().
1996-11-13 06:13:39 +00:00
cgd
000ff895c3
sync with alpha version
1996-11-12 21:06:21 +00:00
pk
92d21510ef
Drop in a sun4m version of AUDIO_SET_SWINTR; thanks to Nick Sayer for
...
the reminder.
1996-11-01 23:32:15 +00:00
pk
4dd0b24bf9
Make sure to refer to `sc_ovtype' only when SUN4 is defined, as noted
...
by `r.evans@ic.ac.uk'.
Also, explicitly testwhether we're dealing with a pfour.
1996-10-20 19:18:00 +00:00
christos
8d9699acda
backout previous kprintf change
1996-10-13 02:59:55 +00:00
christos
7d1960f502
backout previous kprintf change
1996-10-13 02:59:38 +00:00
christos
0039d4aa0c
backout previous kprintf change
1996-10-13 02:59:25 +00:00
christos
19d8368f2f
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:44:42 +00:00
thorpej
5c34a4ce35
Use FBTYPE_RESERVED3 for our `unknown' fbtype ... RESERVED1 seems to
...
have disappeared.
1996-10-04 20:35:53 +00:00
thorpej
3db7555465
Returning ENODEV is not correct in a poll entry point. Instead, since
...
read/write returns an error, use seltrue().
1996-10-04 20:34:33 +00:00
abrown
7557090650
Add cgfourteen_poll() entry point to sync with recent changes in frame
...
buffer cdev code.
1996-10-01 00:06:45 +00:00