b6b83e2ec3
delint; use MAX(sizeof(..),sizeof(..)) instead of max(...) for array size
2001-05-15 14:03:27 +00:00
13a9902fc6
delint: can't have an empty case item at the end of a switch; need a ; at least
2001-05-15 13:53:20 +00:00
ae0203ee27
Correct arguments to bus_dmamap_create(), and add a reset routine for the v3
...
interface.
2001-05-15 12:49:37 +00:00
0071e88a8c
fixed mistake.
...
major version and minor version were made reverse.
2001-05-15 11:45:50 +00:00
08d33f4cc0
Fix indentation in recent commit.
2001-05-15 09:06:15 +00:00
4afb07bd12
getting prism2 firm ver routine to wi_get_id().
...
if firm ver is more than 0.8c3, promiscuous mode is off.
typo WI_RID_STA_IDENEITY -> WI_RID_STA_IDENTITY
2001-05-15 09:01:27 +00:00
0aae41bf84
Clean up comment about unregistering callbacks
2001-05-15 06:54:07 +00:00
c3967bca55
Various small changes.
...
Clean up one bug in a DPRINTF in arrs_input which could panic on some packets.
Gut the ack/response functionality and clean it up so all packets get checked
correctly and the abuf struct isn't used once the ab_cb has happened (there
still could be ack packets waiting to be processed at that time).
Finally, add some documentation explaining read/write/inreg and their
purpose/argument calling.
2001-05-15 06:52:30 +00:00
d91da495a9
Back out last change until I get fwohci rototilled better for checking the ack bits. Makes things compile again.
2001-05-15 06:30:30 +00:00
caa399b739
WEP cannot be used when Prism2 Firm version is lower than 0.8.3.
...
Although WEP is used in Windows also in an old firm,
because WEP is processed by the windows driver side.
If Prism2 Firm version is more than 0.8.3, WEP does work without 'Promiscuous ON'.
2001-05-15 04:27:22 +00:00
4d4231d0e9
Add support for "Corega FEther CB-TXD".
...
kern/12709: from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
2001-05-15 04:26:23 +00:00
b003ab3d9c
Regen.
2001-05-15 04:25:12 +00:00
0f5babc5cb
Add product "Corega FEther CB-TXD". Modified from kern/12709.
...
from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
2001-05-15 04:24:28 +00:00
2970b99ac9
It enabled it to control roaming mode and authentication mode.
...
Roaming mode can change value into 'firm mode' and disable.
Authentication mode can change into 'Open System authentication'
and 'Shared Key Authentication' with Prism2 chip.
wi_get_id() was introduced in order that chip might judge automatically
whether it is Prism2 chip. Therefore, a pp_prism2 entry in
"struct wi_pcmcia_product" became unnecessary.
2001-05-15 04:14:06 +00:00
38c798fe9f
Encapsulate name declarations in macros in preparation for adding
...
conditionally-compiled code for the DP83820.
2001-05-15 03:06:21 +00:00
edfd12a9b1
Define the register/descriptor differences between the DP83815 and the
...
DP83820. The DP83820 definitions are wrapped in #ifdef DP83820, since
there are enough differences that a single binary object would not be
able to efficiently drive both the DP83815 and DP83820.
2001-05-15 02:19:05 +00:00
bdb6ea6ecc
Regen; added DP83820 Gigabit Ethernet chip.
2001-05-14 22:37:24 +00:00
285931ff50
Add product ID for the National Semiconductor DP83820 Gigabit Ethernet
...
chip.
2001-05-14 22:36:06 +00:00
2573405952
Add latent vendor entries for ServerWorks and Winbond IDE controllers.
...
No code to use them as yet.
2001-05-14 20:41:27 +00:00
bc980d7eba
Use SCSI/ATAPI common definition for MODE_{SELECT,SENSE}{,_BIG}. Define
...
functions to send theses commands in scsipi_base.c and use them instead
of ad-hoc commands setups.
2001-05-14 20:35:27 +00:00
85c02ac331
epintr(): eliminate write-only variable 'addrandom'
2001-05-14 09:28:49 +00:00
6ff7de5716
remove unneeded #includes, fix typo
2001-05-14 08:01:23 +00:00
1f7c685ce3
remove //-commented debugging stuff
2001-05-14 07:35:33 +00:00
497bb809df
do not use the synchronous read mode for MCA 3c529
2001-05-14 07:03:50 +00:00
61ca5f641b
Remove ackcb. It's a duplicate of existing functionality.
2001-05-14 06:51:36 +00:00
98139fa8b9
Make sure and zero out the malloc'd abufs before using them.
2001-05-14 05:46:41 +00:00
7f2de75450
Corega FEther PCC-TXD works fine.
2001-05-14 01:44:42 +00:00
9a107674e5
regen
2001-05-14 01:43:42 +00:00
70f4199532
add product Corega FEther PCC-TXD
2001-05-14 01:41:16 +00:00
2cd8833615
Change the comment about sucky performance to recommendation to remove
...
DIAGNOSTIC/DEBUG from the kernel. This helped to boost the performance
on my test machine from ~5KB/s to like 800KB/s for ftp test, and
to like 700KB/s for netio test. I wouldn't have imagined the options
are THAT costly ....
2001-05-13 20:43:04 +00:00
9654c235a7
Note TS11 (ts).
2001-05-13 15:34:25 +00:00
59b29023fd
Update the TS11 driver to useable state.
...
Thanks to Michael Kukat for providing a machine to test this driver.
2001-05-13 15:32:40 +00:00
f66126b9f0
Moved from sys/arch/vax/uba/.
2001-05-13 15:30:10 +00:00
637bffc245
Add bus type to softc.
2001-05-13 15:23:37 +00:00
3790f44eac
Add a retries counter to abuf
2001-05-13 05:02:08 +00:00
880b3e6a6f
Add locators support
2001-05-13 05:01:42 +00:00
a3263e073a
Turn off PCMCIADEBUG by default. This should get set with options in a config file
2001-05-13 04:24:51 +00:00
95cc3bf342
Turn off PCMCIACISDEBUG by default. This should get set with options in a config file
2001-05-13 04:24:28 +00:00
6cf92c7dba
Turn off PCMCIADEBUG by default. This should get set with options in a config file
2001-05-13 04:23:46 +00:00
6f62797262
Don't leak memory in case of a realloc failure.
...
Reported by: grendel@heorot.stanford.edu (Ted U)
2001-05-12 19:18:57 +00:00
bfd7dcb931
Add first pass generic ack callback code (to eventually replace mbuf specific code).
...
Change ab_node's to ab_req.
Fix a bug where setting BIBValid on OHCI 1.0 chips (this is a reserved bit
on 1.0)
2001-05-11 06:10:44 +00:00
29499573cd
Change ab_node's to ab_req.
...
Use read/write instead of input/output.
Fix a bug in attach where the abuf wasn't getting zero'd out.
2001-05-11 06:09:01 +00:00
5bf1559a64
Rename input/output to read/write to match ieee1394var.h
2001-05-11 06:07:40 +00:00
2d235c864f
Add some notes
2001-05-11 06:07:02 +00:00
b4974f0526
Add first pass of generalized hooks for packet completion (i.e. ack) codes. This will eventually replace the mbuf code when it moves back to if_fw.c where it belongs.
2001-05-11 06:06:03 +00:00
6dc32302f3
Add mask for getting the ACK bits out of the status area of a DMA context descriptor
2001-05-11 06:04:49 +00:00
b7d6b60f87
Change abuf to include both requestor and responder softc's (for dealing with requests from other nodes later).
...
Add a callback so the ACK bits can be looked at if wanted.
Change the input/output pointers to proper proto's and rename to read/write.
2001-05-11 06:03:55 +00:00
32a67a12cd
Remove extraneous prototype
2001-05-11 06:00:17 +00:00
0f8a2c610f
Add MI cprofb (used on shark and netwinder)
2001-05-11 04:47:55 +00:00
240de9a426
Definitions for the Dallas Semiconductor DS1286/DS1386 Real Time Clock.
...
From Rafal K. Boni.
2001-05-11 02:07:09 +00:00
18e25d5feb
Add a flag to suppress SCC reset at attach time.
...
From Rafal K. Boni.
2001-05-11 01:40:48 +00:00
ba2882488a
Despite what the hardware docs say, the global reset command is not
...
done when the command-in-progress bit has been cleared. The 1ms
time that is mentioned also seems wrong; 20,000us is not enough
on at least one machine. So, do a delay(100000) in ex_reset.
Fortunately, this function is only called when the card is
attached or when hardware failure is suspected.
While here, only mask one 1 bit in the 'reset hack' case.
2001-05-10 22:57:44 +00:00
8aad07ad6a
Add missing printf().
2001-05-10 09:41:19 +00:00
59f85c4e3e
Ansify a function I forgot last time.
2001-05-09 19:33:07 +00:00
6300e455b4
Make sure `bhlc' is initialzed before we consult it to determine
...
the number of functions on the card.
2001-05-09 18:16:39 +00:00
330ab2b636
Print a clock frequency of the chip.
2001-05-09 16:24:43 +00:00
94b7017e7f
Point out where the documentation is wrong.
2001-05-09 12:08:44 +00:00
f82cb49523
Add FireWire OHCI controller on Cardbus.
2001-05-09 12:07:40 +00:00
7ac3b0b5a9
Ansify.
2001-05-09 12:07:01 +00:00
c37a0f8fb8
Fix grammaer in error message.
2001-05-09 12:06:25 +00:00
ecdf760718
fix locking problem of event queue access.
2001-05-08 17:23:09 +00:00
09858f6fc8
change promisc mode in case of SIOCSIFFLAGS of wi_ioctl.
...
Fix indentation.
2001-05-08 16:42:49 +00:00
dbb7276f40
fix RCS Id.
2001-05-08 14:46:06 +00:00
1480c8fae2
delay(10) is too much enough for command waiting routine.
2001-05-08 13:42:04 +00:00
a9bf1b0410
delint
2001-05-07 08:15:41 +00:00
3db21b039c
We map in by MLX_EISA_SLOT_OFFSET, so remember that when accessing the
...
IOCONF registers. Pointed out by thorpej.
2001-05-06 20:34:41 +00:00
8311862915
Add amd766 support. Rename some variables to 7x6 now that it supports
...
both 756 and 766.
2001-05-06 20:06:35 +00:00
ae9cc4fa8a
Add an (untested) EISA front-end for the `mlx' driver.
2001-05-06 19:54:59 +00:00
95450fbced
Make provision for resetting the board at start-up.
2001-05-06 19:53:04 +00:00
d4d6497c45
Regen.
2001-05-06 19:44:14 +00:00
0c528fcfc0
Add some Mylex products.
2001-05-06 19:43:54 +00:00
06fc2f85cc
Since __HAVE_OLD_DISKLABEL, DISKMINOR(u, p) isn't continuous over "p"
...
anymore. So we can't pass a range to vdevgone() but have to loop over the
partitions explicitely.
(otherwise the next device unit will be killed)
2001-05-06 18:30:56 +00:00
fda35ea62c
Add dmc.
2001-05-06 17:38:36 +00:00
816247df06
Add il, dmc, ts and if_uba.
2001-05-06 17:37:52 +00:00
09a79adad2
Driver for the DMC-11/DMR-11 DDCMP interface, (untested) from 4.4BSD.
2001-05-06 17:36:04 +00:00
9fce66b9a0
Regen.
2001-05-06 16:10:45 +00:00
6e51539959
Add some IDs for the AMD760 chipset, as specified in the datasheet.
2001-05-06 16:09:38 +00:00
bb0a481471
Add il + ifuba.
2001-05-06 15:32:47 +00:00
7026635893
Driver for the Interlan NI1010 Ethernet Controller, from 4.4BSD.
2001-05-06 15:30:46 +00:00
93011fb5f6
Use if_uba + ether_ioctl routines. Removed ~150 lines of duplicated code.
2001-05-06 15:27:48 +00:00
9b9db3a6bd
Back from the dead, but now changed to use the bus_dma interface.
...
Still to do:
- ubaresets
- BDP handling
2001-05-06 15:21:44 +00:00
9bf58a757b
Add missing break statement.
2001-05-06 14:32:35 +00:00
54d9a46bbc
Vrc4172 GPIO support. This device is currently configured on PenCentra 130.
2001-05-06 14:25:15 +00:00
3446a61cb3
Fix a typo from thorpej_scsipi merge. No-sense information with retval == 0
...
should only print if SCSIPI_DEBUG is defined.
2001-05-06 11:31:08 +00:00
8bb5cfe6aa
divided into PCMCIA attachment and common code of wi.
...
since if_wi_ieee.h does not depend for pcmcia,
sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .
2001-05-06 03:26:38 +00:00
bef8b534cc
Now that we can do it, print "HPT366" or "HPT370" depending on PCI revision.
2001-05-04 18:38:36 +00:00
7e9f9eaaa1
Better support for VIA chipsets: look at the product/rev ID of the ISA bridge
...
to guess the pciide capabilities, rather than trying to guess it by ourselve.
Add preliminary support for the 686b (Ultra/100) guessed from FreeBSD/linux
driver (datasheet not publically available, I contacted via).
Let chip-specific map routine do the autoconf printf if ide_name is NULL
(they may have more details about the controller than we have in pciide_attach)
2001-05-04 15:25:05 +00:00
956a71c1c5
Add pci bus number to pci_attach_args, as suggested by Jason on tech-kern
...
(needed for pciide)
2001-05-04 15:13:17 +00:00
5b3932d176
Implement polled command mode, and use it for writing system dump
...
and for initial autoconf probes; the latter eliminates need for
deferred configuration (and makes dmesg a bit nicer).
g/c EDF_IODONE flag - protect against interrupt by calling tsleep()
at splbio in worker thread
g/c unneeded stuff, improve some autoconf messages
2001-05-04 12:58:34 +00:00
27155d9a6d
Add an ATAPI front-end to the st driver. Completely untested for now,
...
but st at scsi should still work :)
2001-05-04 07:48:56 +00:00
e3f2f91bfb
Split pci and eisa/isa attachment calls, plus misc cleanup.
2001-05-03 20:34:54 +00:00
487447a9bf
Bump values of the number of up- and downlaod descriptors such that
...
saturating a 100Mbit link will not lead to running out of them.
2001-05-03 17:59:24 +00:00
dcd7e604ed
Make weasel watchdog timer work reliably with help from <thorpej@zembu.com>
...
Remaining issues to deal with:
- recognize when watchdog timer is deactivated on the Weasel.
- deactivate weasel watchdog timer if we pop into ddb.
2001-05-03 17:55:47 +00:00
c58375dd6a
Well, 16us is certainly more than 500 nanoseconds, but 1us is too, right?
...
This change improves elmc performance to ~350KB/s on my 386DX,
which is better than even WD8003.
2001-05-03 11:17:36 +00:00
893ab0ad39
export dec_boot.h
2001-05-03 05:26:08 +00:00
f29b37329e
Change to DPRINTF/DPRINTFN for debug output.
2001-05-03 04:42:11 +00:00
3aa56ffc5a
Retabify to correct style. Also, change to using DPRINTF interface for debug output.
2001-05-03 04:41:34 +00:00
4e54f2d907
Style police. Got the tab'ing correct
2001-05-03 04:37:43 +00:00
58b62ea0cf
Correct playing mu-law and linear.
2001-05-03 02:09:11 +00:00
ff3917c60f
Oops, it contained some debug code.
2001-05-02 13:34:33 +00:00
63a7c0b5ad
Add IBM SCSI Adapter support to the list - this is the last thing
...
I'm aware Linux MCA supports and NetBSD not
2001-05-02 13:32:21 +00:00
63958eee01
One item off TODO list - we check for MCA bus presence via bios call
2001-05-02 13:20:31 +00:00
af80ef9d9a
Add vs for x68k.
2001-05-02 13:01:19 +00:00
1a9388aa50
Software codec for Oki MSM6258 voice synthesizer.
...
Recording untested.
2001-05-02 12:53:31 +00:00
399af9e4a8
X68k built-in voice synthesizer supports 4bit ADPCM.
2001-05-02 12:49:41 +00:00
90b27e80b9
Redo attachement of scsi/atapibus, so that atapibus at umass works again
2001-05-02 11:24:01 +00:00
2963ff5c58
Add `l_poll' to `struct linesw' and provide an xxxpoll() entry point
...
in each tty driver to indirect through it.
This allows tty line-disciplines to handle poll(2) system calls.
2001-05-02 10:32:08 +00:00
6baecd7e87
Don't forget to init chan_bustype.
2001-05-02 10:31:41 +00:00
28d47d8db3
Use same type for first field of struct ata_atapi_attach and struct
...
scsipi_channel, so umass has better chances of working on big-endian systems.
2001-05-02 09:47:45 +00:00
796f5b43a7
delint
2001-05-01 16:40:03 +00:00
4dbb3cf591
Add a few more items
2001-05-01 13:57:41 +00:00
43800774d5
Add hpcarm devices (sacc, sacom, sacpcic, saip, saost).
2001-05-01 12:44:40 +00:00
37ed68b3e4
Avoid null pointer dereference.
2001-05-01 06:17:23 +00:00
d483a2c9e2
Fix whitespace usage (fow now, previously existing code only just due to
...
my time shortage):
- Use 8 column for basic indent.
- Use 4 space for 2nd level indent.
- Use tab instead of 8 spaces.
- Don't put space before function call operator. That's unary operator.
- Wrap lines so that it fits in 80 columns.
2001-05-01 06:15:42 +00:00
5044375656
Wrap some variable definitions with #ifdef FW_DEBUG that only apply in debug mode.
2001-05-01 05:17:40 +00:00
f58c020bfc
Remove some one-off debug printf's
2001-05-01 05:17:08 +00:00
9625a01e94
Change to IPL_BIO
2001-05-01 05:10:30 +00:00
af20295c95
Extend ieee1394_abuf to include read/write operations cleanly.
...
Add ieee1394_attach_args
Add sc1394_configrom_len
Add list links for nodelists from parent bus.
2001-05-01 04:48:11 +00:00
370ee1f0f0
Add a 64bit version of CSR_BASE
2001-05-01 04:48:10 +00:00
59c9536fe4
Add proc struct for kthread, interrupt handler flags, and nodelist
2001-05-01 04:48:10 +00:00
06dd6e0f40
Extensive changes from fwnode integration
...
Move interrupt routine to simply updating state flags and ack'ing interrupts
Move main processing into kthread
Change IPL level to IPL_BIO and try not to hold splbio very much if at all.
Add baseline support for attaching/detaching/updating fwnode's.
Start adding higher level API which isn't tied to if_fw/mbuf's
2001-05-01 04:48:10 +00:00
b44a25d8d6
Initial checkin for fwnode code. Needs extensive cleanup
2001-05-01 04:48:10 +00:00
cd6ceaf2cd
Put in the structure for fwnode/fwscsi
2001-05-01 04:48:10 +00:00
59bde215a7
Initial checkin for fwnode support
2001-05-01 04:46:23 +00:00
46ebed2ee8
Initial checkin for fwnode support
2001-05-01 04:19:20 +00:00
b2230effa3
Doesn't need fwohci include's. Change struct device to ieee1394_softc.
2001-05-01 04:18:29 +00:00
a8304325bf
Fix 'busname' to attach nodes correctly.
2001-05-01 00:25:16 +00:00
d3a64bd0d8
Add code to recognize and set media on GMII (Gigabit MII) PHYs.
...
802.3 doens't specify ANAR or ANLPAR bits for GMII. Need to
use PHY-specific registers for this, for now, which means we
need specific drivers for the Gigabit-capable PHYs (I think the
most common is the BCM5400).
2001-04-30 19:49:08 +00:00
63604adafa
Add a bunch of Gig-E definitions.
2001-04-30 19:21:03 +00:00
19b0c05827
Ops, don't forget to increment li->used for each tagged command.
2001-04-30 13:58:32 +00:00
2cc0fbbe14
remplace /*
...
*/
with
#ifdef notdef
#endif
to avoid:
../../../../dev/ic/hmereg.h:275: warning: `/*' within comment
2001-04-30 12:22:42 +00:00
26b0905dd0
Machine independent GPIO interface.
2001-04-30 11:42:17 +00:00
4ca3c858b6
Copy of sys/arch/hpcmips/vr/button_vrgiu.c.
2001-04-30 10:10:18 +00:00
c732b45553
Copy of sys/arch/hpcmips/vr/pwctl_vrgiu.c.
2001-04-30 10:09:14 +00:00
1a5e77115a
Place holder until real fwscsi code is fleshed out.
2001-04-30 09:06:27 +00:00
dfc69462fd
First pass at the overall TODO list. Some of these may come off before I get the full code checked in even
2001-04-30 09:05:40 +00:00
98182717b8
Rework implementation notes/ideas with a more fleshed out example.
2001-04-30 09:02:38 +00:00
00085e9fc8
Add MI osiop.
2001-04-30 04:53:41 +00:00
0ceded7d3b
Generated from osiop.ss rev. 1.1:
...
Initial compiled script for 53c710.
2001-04-30 04:49:57 +00:00
613923b42e
Add a MI driver for the Symbios/NCR 53c710 SCSI controller.
...
This is based on amiga's siop driver, but converted to use
bus_space(9) functions and modified to fit bus_dma(9) framework.
Currently tested on NetBSD/arc with jazzio 53c710 SCSI,
which really requires bus_dma(9) functions :-)
Sync transfers and disconnect/reconnect are also working.
TODO:
- Test under more heavy load
- Clean up osiop_checkintr() hander
- Reorganize command queue and sync negotiation handling more suitable
for thorpej-scsipi mid-layer
- Re-think defered interrupt handling for amiga
2001-04-30 04:47:50 +00:00
b3b4a527b3
remove trigraph
2001-04-30 03:53:19 +00:00
5de219fbef
delint
2001-04-30 03:49:12 +00:00
c83fa97ec8
remove trigraph
2001-04-30 03:48:06 +00:00
52a1d62934
delint
2001-04-30 03:45:35 +00:00
786063e4da
use #if 0 rather than // or /* to comment out blocks of code
2001-04-30 03:43:09 +00:00
f863105161
remove some lint, including ansifying funcs
2001-04-30 02:55:08 +00:00
36d8e99d14
Cast args correctly to match format strings.
2001-04-30 02:49:04 +00:00
5a6772df26
Cast base correctly for format string.
2001-04-30 02:46:20 +00:00
9d02aae3a9
minor lint
2001-04-30 02:44:53 +00:00
85772a1cef
remove some lint
2001-04-30 02:34:58 +00:00
abf1970c82
delint newline in string
2001-04-30 02:17:55 +00:00
599ac910c6
this is _C_ not _C++_, and // is NOT valid in _C_
2001-04-30 01:34:04 +00:00
d2ac513298
remove some lint
2001-04-30 01:19:40 +00:00
afdcbf7e55
Correct formatting. Put the port and the ethernet address in their own
...
line.
XXX: it is stupid that pcmcia_io_map() prints " port 0xNNN[-0xMMM]". This
makes the printing code confusing.
2001-04-29 20:12:01 +00:00
3ae161c702
don't put a trailing comma in pcmcia_devinfo. All the drivers use
...
printf("%s\n", devinfo) and it looks stupid.
2001-04-29 20:10:24 +00:00
c3736bf111
Use ubmemalloc() for data structures. Remove unused vars. KNF.
2001-04-29 12:32:18 +00:00
b83fe1a852
Correct register address map for 53c710.
2001-04-29 11:20:44 +00:00
a2d52d0ed4
Add #define for 1394 ROM signature
2001-04-29 08:37:04 +00:00
acc17cc823
Set the delta for the particular source so telling mixerctl to decrease the
...
volume (using --) adjusts it far enough to stick.
2001-04-29 02:47:25 +00:00
1346d56311
- don't wait when called from interrupt context (basically this means we
...
can't sleep in HBA drivers)
- pool_get can fail, so return XS_RESOURCE_SHORTAGE instead of panic()
- don't try to bzero() a NULL pointer
2001-04-28 15:09:42 +00:00
e67bc465a2
Make it compile with DEBUG after SCSI changes.
2001-04-28 14:48:39 +00:00
862125c057
Don't forget to set XS_CTL_DATA_OUT (that was removed in previous).
2001-04-28 09:33:25 +00:00
335ac52a5b
Use simple tags for read and write, unless B_ORDERED is set, in
...
which case we use an ordered tag.
2001-04-28 04:11:31 +00:00
74b15b27a2
Don't forget to call psw_done() !
2001-04-27 21:36:58 +00:00
2758818d81
regen - SKNET cards
2001-04-27 18:04:14 +00:00
3367b801f2
Add driver for SKNET Personal and MC+ - AMD Lance 7990 based ethernet cards.
...
Both models tested and seem to be quite stable and fast.
Thanks to:
- Hans Hubner <hans@Huebner.org> for giving me the cards for testing
- Georg Klug of Syskonnect, who provided me with hw docs for these cards,
very promptly and willingly - I wish all vendors would be like this
- Alfred Arnold, Linux SKNET driver author, for giving me valuable Syskonnect
contact :)
2001-04-27 18:03:40 +00:00
b28d00fa02
Introduce mca_match_disabled() - this returns true if cards with particular
...
id should be handled even through it's marked as disabled in POS registers.
There are some cards which need this due to nonstandard hw design.
2001-04-27 17:52:51 +00:00
d66e548d92
Introduce mca_match_disabled() - this returns true if cards with particular
...
id should be handled even through it's marked as disabled in POS registers.
There are some cards which need this due to nonstandard hw design.
2001-04-27 17:11:45 +00:00
6589e65051
Don't panic if the memory size is "weird", but instead compute
...
reasonable transmit/receive buffer count.
This is needed for e.g. SKNET adapters, which use top 30 bytes of 16KB
memory to map registers and PROM and hence not all the memory is
available for buffers.
2001-04-27 17:08:02 +00:00
af5fd4c7d8
Stopgap measure for PR kern/12762: cut the number of openings per device
...
to 16 or 4 (depending on capabilities of adapter), as it was before
thorpej_scsipi integration
Waiting feedback to known whenever the problem with openings set to AHC_SCB_MAX
existed before.
2001-04-27 14:49:11 +00:00
55ffdd0e46
make this compile with the new scsi framework
2001-04-27 08:06:33 +00:00
a7d2fe8275
Use uballoc()/ubmemalloc() for data structure allocation.
2001-04-26 20:05:46 +00:00
6bfb730eba
Use ubmemalloc() to get mapped uba memory.
...
Only copy mbufs if there are more than two in a mbuf chain (on transmit).
This squeezed another 5% out of the DEUNA. (now closing up to 100 K/s :-)
2001-04-26 19:36:07 +00:00
014984b747
Add functions to allocate mapped-in qbus memory.
2001-04-26 19:16:07 +00:00
596cc0bc10
Cast the config block buffer to (u_int8_t *) when reading it
...
from ISA memory space.
2001-04-26 17:58:28 +00:00
e5422a382f
Explictly include <machine/pio.h> (since this driver uses
...
i386 pio instructions -- XXX BROKEN).
2001-04-26 17:57:47 +00:00
856411129e
Disable tagged queuing for now, it causes commands timeouts.
...
Note that it's not worse since thorpej_scsipi integration: tagged queuing
was not used before, because of a tag message rejected at probe time.
2001-04-26 17:09:39 +00:00
d032d80637
Redo xfer sync/wide/tag notification again: we need to notify upper layer
...
that we can do tag.
Start sync/wide nego at first command, but wait ADAPTER_REQ_SET_XFER_MODE
to notify upper level.
2001-04-26 16:56:53 +00:00
03941a12da
- Fix typo in comment.
2001-04-26 08:23:22 +00:00
0d6646292e
- Fix typo in comment.
...
- Add (missed)powerhook_disestablish() in ex_detach().
- Sync with below. Original commit log message:
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2001-04-26 08:21:51 +00:00
360780f37e
s/\<PROTO_ATAPI/C&/
2001-04-26 03:59:32 +00:00
38ba8564f5
Add esm.
2001-04-25 18:32:10 +00:00
937a7a3ed9
Pull up the thorpej_scsipi branch to main branch.
...
This is a completely rewritten scsipi_xfer execution engine, and the
associated changes to HBA drivers. Overview of changes & features:
- All xfers are queued in the mid-layer, rather than doing so in an
ad-hoc fashion in individual adapter drivers.
- Adapter/channel resource management in the mid-layer, avoids even trying
to start running an xfer if the adapter/channel doesn't have the resources.
- Better communication between the mid-layer and the adapters.
- Asynchronous event notification mechanism from adapter to mid-layer and
peripherals.
- Better peripheral queue management: freeze/thaw, sorted requeueing during
recovery, etc.
- Clean separation of peripherals, adapters, and adapter channels (no more
scsipi_link).
- Kernel thread for each scsipi_channel makes error recovery much easier
(no more dealing with interrupt context when recovering from an error).
- Mid-layer support for tagged queueing: commands can have the tag type
set explicitly, tag IDs are allocated in the mid-layer (thus eliminating
the need to use buggy tag ID allocation schemes in many adapter drivers).
- support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command
will be requeued, or a REQUEST SENSE will be sent as appropriate.
Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 17:53:04 +00:00
94e69e110f
Initialise all function's latency timer and cacheline size.
2001-04-25 09:29:36 +00:00
3d8f9a4f4f
Set function-in-use flag before calling power control function in
...
order to prevent turn on power twice. This change does not prevent
power-off/power-on conflicts.
2001-04-25 09:20:32 +00:00
4d24d9a940
Regen.
2001-04-25 03:07:19 +00:00
3e4456d049
Spell "portege" correctly - it's a computer, not a car.
2001-04-25 03:06:11 +00:00
6f6fe2f3ad
Spell occurred correctly.
2001-04-25 02:33:08 +00:00
ad44e79f90
It appears there's a race condition when disabling a channel that causes us to
...
need to explicitly relatch the interrupt when firing it up again. So, in the
trigger routines, explicitly disable and reenable the interrupt to relatch it,
like we do in the interrupt routine.
Also clean up some broken loop overrun checks.
My ES1371 seems to be more reliable now, but I'm not going to pretend to fully
understand this chip.
2001-04-24 21:03:33 +00:00
115f4e4207
print the drq together with irq, slot info
2001-04-24 09:15:06 +00:00
09062a99f9
one less
2001-04-23 09:36:01 +00:00
1fe3261554
Add constant for SKNET Ethernet Card
2001-04-23 06:10:09 +00:00
15224351ef
Compact autoconf info by printing the IRQ number together
...
with 'at mca0 slot foo' info.
2001-04-23 06:10:08 +00:00
a0c30da432
Add comment set spec id to macro types
2001-04-23 00:57:32 +00:00
7c87238caa
Add Model id as a valid generic type
2001-04-23 00:57:05 +00:00
3d1c1edbc5
g/c edc_dev_status[]
2001-04-22 20:02:38 +00:00
d0a98e1d18
fix edc_dump_status_block() to correctly print Command Error Code and
...
Device Error Code/Status when appropriate
add one item to TODO - need support for kernel memory crash dumps (to be
implemented "soon")
2001-04-22 20:00:59 +00:00
27253eea15
Use uvm_pageboot_alloc() rather than pmap_steal_memory().
2001-04-22 16:44:41 +00:00
9aba6e0cc4
Add arcpp.
2001-04-22 15:03:22 +00:00
85f0e37b44
edc_dump_status_block(): print RBA # and block count as unsigned
2001-04-22 13:00:24 +00:00
912e570671
Introduce machdep mca_disk_[un]busy(), which turn on/off disk LED.
...
Call as appropriate from the ESDI disk driver
2001-04-22 11:52:18 +00:00
8927d6f1be
Fix serious bug in bounce buf handling - the EDF_BOUNCEBUF flag needs
...
to be cleared always in edmcadone(), otherwise if there is a write
via bounce buffer followed by read directly to buf, the read operation
would return trashed data (the buf data would get overwritten
by contents of bounce buffer in edmcadone()).
Reset b_resid as necessary when the i/o is done, too.
g/c some unneeded stuff, use lockmgr()-style locking in ed_[un]lock(),
better avoid some deadlocks
These changes make the driver quite a bit more stable. It's actually
reliable enough to be possible to newfs the drive and use it for
read/write filesystem now.
2001-04-22 11:32:49 +00:00
68ec0583b4
Add latches (arm26).
2001-04-22 00:27:18 +00:00
e53804bd4b
Preliminary support for Acard ATP850/860 UDMA PCI IDE controllers.
...
XXX Currently disabled by default because it has some problems on macppc.
XXX Maybe some more initialization is needed, but there is few information
XXX about the chips.
2001-04-21 16:36:37 +00:00
8dfe3efca7
space -> tab
2001-04-21 16:10:54 +00:00
e815501ea9
Regen from pcidevs rev. 1.318:
...
> Correct an entry for Acard UDMA IDE controller.
> The chip is actually marked as ATP860-A, not ATP860R.
2001-04-21 13:32:25 +00:00
42f78f411a
Correct an entry for Acard UDMA IDE controller.
...
The chip is actually marked as ATP860-A, not ATP860R.
2001-04-21 13:28:52 +00:00
f39a68828d
Make sure to check SC_ACCEL_TAGS in ncr53c9x_ioctl()
...
even if sync transfer is disabled or not supported.
2001-04-21 07:28:22 +00:00
64eed5859d
Clean up ncr53c9x_select():
...
- Define NCR_F_SELATN3 for sc_features and use it to check if the chip
supports SELATN3 command
- Make conditions of sending messages a bit simpler.
2001-04-21 05:35:20 +00:00
f2e3f6d5d4
Cosmetics. (tab/space etc.)
2001-04-20 17:32:33 +00:00
31d512c2e3
Added support for the chipset used on the Sun2 "sc" SCSI adapters.
...
A little rough around the edges, but definitely a starting point.
2001-04-20 16:35:22 +00:00
1351706593
Fix a few race conditions ... the VSYNC update flag could be cleared
...
resulting in a blank screen when f.e. a setcursor ioctl was called
after the screenblanker had enabled the screen again ... the actual
switching on was then never performed at VSYNC.
A simple |= instead of = does the trick ... just leave the other bits
on please :)
2001-04-20 11:53:06 +00:00
4d5eec3337
regen
2001-04-20 11:19:51 +00:00
a20a13451f
Add support for IBM Multi-Protocol Communications Adapter. Card provided
...
by Hans Hubner <hans@huebner.org>.
We only support the card in "serial" mode. BISYNC nor SDLC modes are
not supported.
2001-04-20 11:19:27 +00:00
1df81c3607
regen
2001-04-20 10:05:16 +00:00
b973e27bba
Add support for NeoTecH Single RS-232 Async. Adapter, SM110. Tested
...
with card provided by Hans Hubner <hans@huebner.org>.
Also pretty the autoconf attach messages a little.
2001-04-20 10:03:35 +00:00
640bbf7e9f
regen
2001-04-20 07:38:11 +00:00
a98cbd0740
Add MCA ne(4) attachment for Novell NE/2 Ethernet adapter and clones.
...
Tested with NE/2 card provided to me by Hans Hubner <hans@Huebner.ORG>.
The Compex and Arco cards were not tested. According to Linux ne2 driver,
they should work same way as NE/2.
2001-04-20 07:37:42 +00:00
3ec26e703f
regen
2001-04-20 07:10:40 +00:00
6daeb5ba7b
add two Novell NE/2 compatible products
2001-04-20 07:10:12 +00:00
6939f3af70
regen
2001-04-19 18:38:50 +00:00
1420958f33
Add couple cards I got from Hans Hubner <hans@Huebner.ORG>
2001-04-19 18:38:23 +00:00
5452e8a704
dasd --> edc
2001-04-19 17:42:49 +00:00
dbf91c827d
Use "edc" instead of "dasd". As pointed out by Soren, dasd doesn't
...
mean anything special in IBM-talk. And edc better matches prior art, too.
2001-04-19 17:17:28 +00:00
e4cc721094
Correct the opcode for SCSI_MODE_SENSE_BIG.
2001-04-19 10:16:25 +00:00
2355b2e1e7
add dasd and ed at dasd?
2001-04-19 07:47:50 +00:00
361e520ce0
one less - ESDI support is written (albeit the driver needs to be tested more)
...
add some additional comments
2001-04-19 07:33:00 +00:00
24729c94cf
regen
2001-04-19 07:31:17 +00:00
fd1d702ab7
Add a driver for IBM ESDI disk controllers. Tested with IBM Integ. ESDI Fixed
...
Disk & Controller only at the moment.
This driver still needs some touchup (error recovery is not quite
good, MCA DMA controller goo should be moved to driver independant
location), but is working enough to be usable for others. And I
want this under CVS control :)
Thanks to Scott Telford <st@epcc.ed.ac.uk> for providing me docs for
these devices (IBM DASD Storage Interface Specification for MCA rev. 2.2).
2001-04-19 07:30:24 +00:00
af2e19db8f
Remove stuff I didn't mean to commit yet.
2001-04-19 00:50:22 +00:00
72a04bd497
Add HP 3400.
2001-04-19 00:47:49 +00:00
fc1271af53
Regen.
2001-04-19 00:47:30 +00:00
3d2488184c
Add a Lexar CF reader. (From FreeBSD)
2001-04-19 00:47:12 +00:00
4747025b48
ctype-like functions are now in libkern.
2001-04-18 15:40:58 +00:00
caf5e03906
Add Mobile Pro 780 own keymap. This resolves the arrow key problem on
...
Mobile Pro 780.
2001-04-18 14:01:06 +00:00
7f8c2c6de2
fix typo in comment - s/splio()/splbio()/
2001-04-18 05:40:03 +00:00
109656b0a7
rewrite suspend/resume routine. If you suspend while playing audio,
...
clcs and clct continue playing when resume.
2001-04-18 01:35:06 +00:00
6fe345e833
"asc" doesn't exist on arm26 any more.
2001-04-17 23:51:07 +00:00
a7a9126e0e
Regen.
2001-04-17 14:30:01 +00:00
6a59be7d6b
Add Bt760 Ethernet.
2001-04-17 14:29:47 +00:00
23f20b8af6
Update DEVNAMES for the new wscons devices for arm32 wich i had forgotten.
2001-04-17 10:33:21 +00:00
6497b0a623
Regen.
2001-04-17 08:38:23 +00:00
7dfc3d8076
Add a Xirlink camera. From PR 11570.
2001-04-17 08:38:01 +00:00
264c404593
Clean up formatting a little.
...
Split protocol variable into wire and command protocols.
2001-04-17 00:50:13 +00:00
f14db62d03
Add a DIAGNOSTIC.
2001-04-17 00:05:33 +00:00
d71d51409d
"acemidi" podulebus device.
2001-04-16 20:14:04 +00:00
14dceb11ef
Regen.
2001-04-16 10:42:39 +00:00
6f4ae4bff8
Add lots of storage devices.
2001-04-16 10:42:19 +00:00
22a18cbcb3
Add macro for extracting the whole key as one byte value.
2001-04-16 01:09:31 +00:00
bafbeaf802
Use the bi-directional protocol if the printer supports it.
...
This is the way that e.g. HP recommends (but then some of their printers
have a bug that makes the input pipe useless anyway).
Also try reset both the 1.0 and 1.1 ways.
2001-04-16 00:18:06 +00:00
b1b0b4bc9a
Regen.
2001-04-15 22:33:37 +00:00
9c6b6d7b02
Add more HP devices.
2001-04-15 22:33:23 +00:00
849d818db4
Remove some unused variables.
2001-04-15 15:01:35 +00:00
b86cb140c5
Use a better symbolic name.
2001-04-15 10:26:36 +00:00
595f18daf9
Add quirk for printers that cannot handle bidir mode (not used yet).
2001-04-15 09:38:01 +00:00
d828968798
Regen.
2001-04-15 09:28:31 +00:00
3865f3dfc7
Add a bunch of HP printers.
2001-04-15 09:28:12 +00:00
d62038a18e
Add Aztech sound card found in HP Kayaks.
2001-04-15 03:31:37 +00:00
69337b1dd0
Correct some typos. Add 2 more macro's to extract data from directory entries. Add $
2001-04-15 00:21:38 +00:00
6c7d3e3521
Add rudimentary support for the ACE Midi-Connect card which abs gave me.
...
Currently it appears as a "com" port, which is less than useful, and
occasionally generates stray interrupts. "stty -f /dev/tty00 31250 raw"
does enable it to talk to a nearby MIDI device, though.
2001-04-14 20:39:23 +00:00
7e0b361d84
Fix for kernel alignment crash reported on port-alpha. A developer went on
...
a happy code sweep (in the kernel!) and constified a random selection of
kernel objects. This changed the alignment of the previously-aligned-by-
accident seqprog array, and exposed a lurking bug. I can't decide if this
is good or bad.
2001-04-14 19:37:17 +00:00
bf2dcec4f5
Remove the use of splimp() from the NetBSD kernel. splnet()
...
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
c18a98953b
Regen for moved Trident CyberBlade entry
2001-04-13 19:01:28 +00:00
1384b9cebc
Move the Trident CyberClade entry where it belongs.
2001-04-13 19:00:31 +00:00
b5c707b2b6
Make it link with debug flag.
2001-04-13 12:51:43 +00:00
939159f6d0
Make it compile with debug.
2001-04-13 12:42:40 +00:00
bcdfccea3c
Split the umass driver into the part that handles the X-over-USB protocol
...
(umass.c) and the part that handles scsibus/atapibus (umassbus.c).
This way the must port specific stuff can be removed from umass.c.
2001-04-13 12:24:10 +00:00
38c02444d9
Finally get rid of the UGLY and EVIL hack for avoiding tsleep().
2001-04-13 11:19:58 +00:00
cbcea5e84c
Do mii frobbing in process context.
...
Now we can finally get rid of the evil USBD_NO_TSLEEP hack in the aue driver.
2001-04-13 11:17:11 +00:00
b728f196e9
Comment out some flag stuff that isn't used. Someone should take a look
...
at this. There is something fishy with the mii code, the last argument to
mii_attach() is not being used in any meaningful way.
2001-04-13 11:14:55 +00:00
205b10ed17
Add a flag to mii_flags which will cause autonegotiation to use tsleep()
...
instead of callout. This way adapters which need a process context for
PHY register access (e.g. USB adapters) have a chance.
2001-04-13 11:12:36 +00:00
c5a768d097
Add support for ADMtek AN985.
2001-04-13 00:18:11 +00:00
ed7afd2ad6
Regen.
2001-04-12 23:56:13 +00:00
23b1e2c46e
Some new device (from FreeBSD).
2001-04-12 23:55:58 +00:00
9071f4edbb
Make sure all tasks are remove on detach.
2001-04-12 23:54:56 +00:00
f13ec50e47
Clean up bus dma code for request/response queues.
2001-04-12 21:40:56 +00:00
c5a6653add
Use IPL_NET for now -- the only use of 1394 right now is for network
...
interfaces (IPv{4,6}-over-1394), and this allows us to get rid of
some evil interrupt mixing issues in the 1394 network code right now.
2001-04-12 21:39:31 +00:00
67e357f0a9
splimp -> splvm.
...
This, like all other uses of spl*() in VAX code, needs to be
scrutinized.
2001-04-12 20:38:25 +00:00
5da5b5ae5b
Upon inspection of a 4000/600 dmesg, change the splbios to splubas.
...
XXX THIS CODE IS SERIOUSLY BROKEN! MSCP DEVICES ARE BLOCK I/O DEVICES,
AND THUS SPLBIO SHOULD BLOCK THEIR INTERRUPTS. The VAX port really
needs to get virtualized spl*() levels.
2001-04-12 20:13:26 +00:00
376be9fdf3
splimp -> spluba.
2001-04-12 20:08:09 +00:00
63edf2e11d
Protect the call to uba_done() with spluba().
2001-04-12 20:07:40 +00:00
ae66f2ea53
splimp -> splbio.
2001-04-12 20:05:12 +00:00
3d6b1bec1e
splimp -> splnet
2001-04-12 20:04:24 +00:00
06b19d90b8
splimp -> splbio
2001-04-12 20:03:35 +00:00
669641cb9d
splimp -> splvm (it's questionable whether or not this is really
...
the right level at all -- maybe splhigh? Anyway, XXX comment added
as well).
2001-04-12 19:45:25 +00:00
909f3d7efb
splimp -> splvm (use IPL_IMP needs to be revisited).
2001-04-12 18:18:31 +00:00
477b193d09
support T1 card (LMC1200) properly. PR 12331 (patch from openbsd).
...
change DLT type to cisco HDLC, as lmc driver is hardwired to cisco HDLC
on driver attach. XXX we may need to revisit this, as if_spppsubr may want
to alter this later.
2001-04-12 07:50:54 +00:00
321e957c86
regen.
2001-04-12 07:47:16 +00:00
2ce6b3ba60
change symbol for LMC T1 card. part of PR 12331.
2001-04-12 07:46:00 +00:00
bc6820dd0d
Regen.
2001-04-12 06:26:49 +00:00
ece3db982d
Add UltraSparc IIe PCI interface.
2001-04-12 06:26:20 +00:00
a3fd502107
Nuke some unneeded splimp.
2001-04-12 03:16:56 +00:00
d94ce2f426
splimp -> splnet
2001-04-12 03:10:35 +00:00
5274818efc
Switch to USB_USE_SOFTINTR. The callout hack does indeed work
...
fine for systems without generic soft interrupts, even if it is
a little sub-optimal. Consider it a penalty for ports not
implementing a kernel API.
Addresses kern/11957. The PR has been open for 4 months, and
I have work blocked on the continued existence of splimp() in
the networking code.
2001-04-12 01:39:04 +00:00
f305e19aeb
Only if __HAVE_GENERIC_SOFT_INTERRUPTS is then splusb == splsoftnet
...
(because we register the interrupt with IPL_SOFTNET). However, if
we're using a callout, then splusb == splsoftclock (because the
callouts happen from the softclock interrupt).
Note that splsoftnet blocks softclock interrupts, but this is
meant to better describe what's going on.
2001-04-12 01:18:24 +00:00
745ab257dc
Put back all header files defining ioctls
2001-04-11 19:07:36 +00:00
b7f59127c9
re-add bt8xx.h (needed for fxtv, without which bktr is pretty much useless)
2001-04-11 09:07:21 +00:00
76c2f6d190
Regen.
2001-04-11 08:44:06 +00:00
c2b7bb4ddb
Add device id from PR 12611.
2001-04-11 08:43:47 +00:00
372e5956ef
Only install headers which are actually used by our userland. This
...
saves about 2.2MB under /usr/include/dev/. Discussed on tech-kern@
recently.
I HOPE to get the list right. The headers I left in are ones
used for MI tools and those whose usage I discovered by grep over tree sources.
Feel free to put needed includes back in if you encounter anything which
should not be removed from lists.
2001-04-11 07:42:31 +00:00
dfb8f5f43f
Include isp_ioctl.h.
2001-04-10 21:52:15 +00:00
78a44662f5
Add initial implementation of ISP_SDBLEV, ISP_RESETHBA, ISP_FC_RESCAN,
...
ISP_FC_LIP and ISP_FC_GETDINFO ioctls.
2001-04-10 21:52:00 +00:00
7bcf01a29a
Note one other place that bogus interrupts can be measured.
2001-04-10 21:51:21 +00:00
81a6d0ec41
Add isp_ioctl.h.
2001-04-10 21:50:53 +00:00
5f8aa905e6
Add some HBA ioctl functions (LIP resets, rescan, setting debugging level).
2001-04-10 21:50:40 +00:00
b27eda4ead
Added.
2001-04-10 12:46:26 +00:00
0ccb3965dd
Fix missing splx calls. One of them from OpenBSD.
2001-04-09 23:51:28 +00:00
fd7c4f1c79
ether_ioctl() expects i82586_init() to return an errno. Have it do so
...
(admittedly only EIO at present).
2001-04-09 22:31:16 +00:00
93c0294b72
Specify the size of the framing added to packets, so if_sppsubr.c can
...
calculate correct statistics.
2001-04-09 19:34:40 +00:00
a8c1e6280a
Fix spelling errors in comments.
2001-04-09 16:10:06 +00:00
a71959e501
fix KS_Cmd_Screen* in sigmarion_cmdmap[].
2001-04-09 16:05:53 +00:00
9e9590f441
Change the way the aux port is probed for. Some older chipsets w/o
...
mouse port seem to interpret the "test aux port" (0xa9) command differently,
leading to a non-working keyboard.
Now we try to echo a byte through the aux port by means of the "echo aux"
(0xd3) command, which is what Linux does.
Thanks to Christoph Badura for detailed reports and testing.
2001-04-09 15:45:50 +00:00
e637d8a38d
- Some firmware fills the system drive table with junk, so get the number
...
of system drives from an ENQUIRY.
- Complain if there's more than 1 segment when issuing some kind of enquiry
(this needs to be fixed properly).
- Fix the ID hack for 2.xx firmware.
- Fix an argument to bus_dmamap_sync().
2001-04-09 15:40:09 +00:00
a69e2f1310
Regen.
2001-04-09 11:52:27 +00:00
e68e07d62c
Add Tekram DC-315/DC-395.
2001-04-09 11:51:30 +00:00
a6ae0975d5
regen
2001-04-09 09:39:57 +00:00
552d4c8236
add media options for the Intel UCH2 internal ethernet controller
2001-04-09 09:39:24 +00:00
aa31658cf0
Correct values for sanity checks.
2001-04-08 17:05:10 +00:00
c65417c92f
Make sure to print "\n" at the end of the attach line on non-DEBUG case.
2001-04-08 11:45:45 +00:00
82fe39b9cb
Add a Peracom adapter.
2001-04-08 02:10:57 +00:00
042dae07d7
support "running status" handling. midiplay via umidi is working now.
2001-04-07 22:01:34 +00:00
8aa94c66a0
regen
2001-04-07 11:16:35 +00:00
f5842381bb
add product centronics adapter USB-1284 BRIDGE
2001-04-07 11:16:12 +00:00
2f9f69455f
Fix some bus_dma(9) usage:
...
- bus_dmamap_sync() takes offset into the dmamap, not VA.
- Use BUS_DMA_STREAMING for the data dmamap, not BUS_DMA_COHERENT.
2001-04-07 10:50:13 +00:00
50c9868982
Add a bunch of language specific keymaps. From OpenBSD.
2001-04-07 00:27:55 +00:00
b8cfdb2c1d
Allow a UKBD_LAYOUT option to determine the default keyboard layout.
...
(From OpenBSD.)
2001-04-06 22:54:15 +00:00
09846cd9c0
Regen.
2001-04-06 22:53:16 +00:00
76e981dd50
Add another device (from FreeBSD).
2001-04-06 22:52:55 +00:00
5653ae7375
Add Cisco Aironet 350 Series.
...
XXX: work as same as 340 series.
do not use any 802.11e security enhancements yet..
2001-04-06 09:28:39 +00:00
8a81c1e899
regen: add Cisco Aironet 350 Series.
2001-04-06 09:27:13 +00:00
f53e32994a
Add Cisco Aironet 350 Series
2001-04-06 09:26:29 +00:00
03e45ae8c7
In ea_writembuf(), reset the DMA pointer for each mbuf we copy, since
...
odd-sized mbufs will confuse things. This makes transmission of odd-sized
packets work.
2001-04-06 00:02:49 +00:00
d109dd795a
Add a bit of voodoo code from the old "eb" driver that seems to prevent the
...
80C04 returning garbage when we read from it. This driver can now handle flood
pings without dropping packets.
2001-04-05 22:55:46 +00:00
aaf471b177
Regen.
2001-04-05 20:52:57 +00:00
df7e9d2178
Add Canon PowerShot S100.
2001-04-05 20:52:34 +00:00
817c994ead
Make this compile on alpha with DIAGNOSTIC.
...
Thanks to atatat.
2001-04-05 12:36:51 +00:00
08beeb78a7
change the attach message to contain slot number and product name
2001-04-05 12:22:05 +00:00
c0ecf03bc0
convert to table-based product lookup
...
change the attach message to conform to other MCA drivers - print slot
number and product name
2001-04-05 12:20:26 +00:00
5531835e99
add MobilePro770 cmdmap.
2001-04-05 11:37:18 +00:00
856e0a920e
A value of 1 for tracks/cylinder in the disklabel is apparently sub-optimal.
...
Thus we choose "4 * number_of_columns" as a more reasonable
value (until someone comes up with something better).
This pretends to properly address PR#11989.
2001-04-05 02:48:51 +00:00
5dafac6e18
Add a few opcodes for target mode. Define firmware attributes (for FC f/w).
2001-04-05 02:28:53 +00:00
ad454c818c
Keep up with the Joneses: sync with common core target mode code. Eventually
...
we'll do something with it here.
2001-04-05 02:28:17 +00:00
6c28def28f
Change how SCSI defaults are latched if we're supporting Target Mode.
...
Make sure we pick up the channel for dual bus cards when enabling target
mode. Catch a silly null pointer dereference.
2001-04-05 02:27:33 +00:00
fa02f7a053
Add Japanese model keyboard mapping.
2001-04-04 05:31:57 +00:00
0c5b5be69f
Tweak product ID printing in light of the 80C04A data sheet.
...
Split out Rx and Tx interrupt handlers into their own functions for clarity.
2001-04-02 22:25:17 +00:00
dbbff52c3d
support USB-serial PLANEX USB-RS232 URS-03
...
reported by sakamoto@splhack.org (Kazuki Sakamoto)
2001-04-02 13:38:14 +00:00
8086f5e0ec
Print portno when attaching.
2001-04-02 13:18:31 +00:00
7b7d57c2da
Add some definitions for the 80C04A, thanks to Reinoud, who found me a data
...
sheet for it.
2001-04-01 21:15:15 +00:00
9d6dabe88a
Regen.
2001-04-01 19:24:28 +00:00
557561727e
Add more Keyspan adapters.
2001-04-01 19:24:06 +00:00
95af1455f2
The ZiO! MMC adapter doesn't have a flex geometry page.
2001-04-01 19:05:44 +00:00
d265e74a94
Make the ZiO! MMC adapter work.
2001-04-01 19:04:52 +00:00
c1dfafc4de
Regen.
2001-04-01 18:25:14 +00:00
39ccfa3beb
Add some new devices.
2001-04-01 18:24:49 +00:00
87fee883e5
- Allocate any private space thats requested.
...
- Just use mapreg_map().
2001-04-01 15:06:22 +00:00
99187cdd56
- Allocate any private space that's requested.
...
- Fix a few bogons with the last update.
- Add some more LAN defs.
2001-04-01 15:02:08 +00:00
cb47887dc2
Add two missing splx() (inside DIAGNOSTIC). From OpenBSD.
2001-04-01 15:00:29 +00:00
1077c84a99
Avoid a potential null pointer dereference. From OpenBSD.
2001-04-01 14:59:52 +00:00
f994193bf7
Add Epson 1240.
2001-04-01 14:50:58 +00:00
b20d51da79
Regen.
2001-04-01 14:50:43 +00:00
9132bd9643
Add Epson 1240. Add a comment about the purpose of this file. From FreeBSD.
2001-04-01 14:50:22 +00:00
2abf6b66a5
Change handling of the UFI protocol so it goes through atapibus instead
...
of scsibus. This removes a whole bunch of specioal cases for UFI.
All this great simplification comes from Brett McCoy <bmccoy@genuity.net>.
2001-04-01 14:41:39 +00:00
97fa4f3453
Fix some bad indentation.
2001-04-01 03:28:11 +00:00
ba614ae877
Fix DPRINTF statements so this compiles with debug enabled.
2001-03-31 10:10:37 +00:00
ba9261ba08
add year 2001 to copyright for NetBSD
2001-03-31 09:50:14 +00:00
5a3d02fe8b
fix the copyright - Charles's name was added here by mistake, use
...
standard TNF cookie instead
2001-03-31 09:49:00 +00:00
5e2f81a0cf
Regen.
2001-03-31 09:08:06 +00:00
27fcb60ea5
Add Cyrix products (MediaGX).
2001-03-31 09:06:45 +00:00
5f3d9f1da2
Add driver for AT1720 MCA cards. This uses generic MB86960 support code,
...
and shares some bits with ISA AT1700 driver. Gee, this one was really
easy :)
This card turned out to be quite good performer - I get about 360KB/s
on 386DX PS/2 machine, which is best of all supported cards so far.
Tested with AT1720T, card donated by David Brownlee.
2001-03-31 00:43:05 +00:00
2ceebb6c0e
Remove unnecessary test of tp->t_linesw against NULL; they are results
...
of confusion while correcting compilation error after t_line is
replaced with t_linesw.
2001-03-31 00:35:21 +00:00
6f8f19b16e
fix typo in comment
2001-03-31 00:30:22 +00:00
592dfdc76b
Prepare for MCA attachment:
...
* split off sharable stuff to dev/ic/ate_subr.[ch], move ate(4) device
definition to conf/files
* cosmetic: attach with ate_isa
2001-03-31 00:26:53 +00:00
d04f4ebff1
WSDISPLAY_FONTENC_SONY is gone.
2001-03-31 00:14:32 +00:00
95fda43dd5
make all debugging messages conditional on sc->sc_debug.
2001-03-30 17:30:18 +00:00
30b7c151f0
AEN 0x000c appears to mean `init started'. From lukem.
2001-03-30 16:48:57 +00:00
28f83415ad
Update TODO list.
2001-03-30 15:53:25 +00:00
6a18583c73
Add yds.
2001-03-30 15:23:44 +00:00
537038859e
Yamaha YMF724/740/744/754 (DS-1) PCI audio driver.
2001-03-30 14:32:08 +00:00
42e44c1408
Make Sony's fonts ISO8859-1 compliant.
2001-03-30 13:06:45 +00:00
f6ec9b4ab2
On an 80C04, try not to start reads at addresses of the form xx,ea, xx,ee, or
...
xx,f0. This appears to heavily alleviate, but not to eliminate entirely,
the problems I've been seeing with garbage being read from the rx buffer.
I suspect the real solution lies elsewhere.
2001-03-29 20:49:44 +00:00
2f6fd6b040
Print a warning message when the DMA FIFO fails to fill or empty before we
...
time out.
2001-03-29 17:46:39 +00:00
6db03feca9
Remove unneeded #includes
2001-03-29 08:56:27 +00:00
2a2070aec3
kill bunch of unneeded includes
2001-03-29 08:48:55 +00:00
ae964a3f9b
use NCR_F_DMASELECT instead ncr53c9x_dmaselect
2001-03-29 03:26:52 +00:00
b0605f71d5
fas support added
2001-03-29 02:58:38 +00:00
718d1ed83c
add UMCT_DEBUG option
2001-03-28 19:00:39 +00:00
2c750ca482
add umct device name
2001-03-28 18:48:01 +00:00
19c0a21aaa
support USB-RS232 Converter of Magic Control Technology Corp.
...
More information about this product found at http://www.mct.com.tw
2001-03-28 18:42:13 +00:00
4b8789fde8
regen
2001-03-28 18:36:32 +00:00
6724d33a12
add PID Sitecom USB-232 adapter and D-Link DU-H3SP USB BAY Hub
2001-03-28 18:36:07 +00:00
bb73804714
add NetBSD RCS id again
2001-03-28 17:22:51 +00:00
2815a110f3
add NetBSD RCS id
2001-03-28 17:08:29 +00:00
adf9edcd41
update for miidevs changes
2001-03-28 14:16:49 +00:00
3752421a75
regen
2001-03-28 14:15:23 +00:00
bf6a2bf86c
adapt to corrected OUI calculation
2001-03-28 14:14:57 +00:00
9e8def737f
Reading the IEEE specs shows that the bits have to be reversed when
...
mapping an OUI to the MII id registers.
Doing this in the MII_OUI() macro would be too complex, so put it into
a helper function and move the MII id register interpretation stuff
into miivar.h.
2001-03-28 14:13:06 +00:00
caf82786af
- Unmap space used to read tuple.
...
- No need to zero clear temporary storage twice.
2001-03-28 01:55:55 +00:00
f5f3098c7c
Cosmetic changes; mostly knf.
2001-03-28 01:53:14 +00:00
758fa94327
Print the address within the Rx buffer whenever anything goes wrong: it seems
...
to be significant.
2001-03-27 22:17:51 +00:00
4beebf7d5d
Clean up debugging printfs a little.
2001-03-27 21:43:13 +00:00
8fc709ee67
Add some extra diagnostics:
...
* Use the timer to timoe out transmit operations.
* Spot when the "next packet" pointer falls outside the recieve buffer and
reset the interface.
* Don't reset the interface when we get a bad packet (unless there's
something else wrong as well).
2001-03-27 20:26:45 +00:00
d85c2b7e17
Change place of tuple.{memt,memh} initialization.
2001-03-27 18:09:31 +00:00
7dae264309
Comment and #ifdef cleanup.
2001-03-27 18:03:04 +00:00
f099a26df2
Cast to u_int64_t when computing callout argument, to avoid int overflow.
...
Fixes kern/12471.
2001-03-27 17:24:03 +00:00
d610c23da4
Cosmetic changes.
2001-03-27 10:34:05 +00:00
262675e051
Regen.
2001-03-26 15:27:11 +00:00
ea509434b6
Add Microtech Cameramate. From PR 12477.
2001-03-26 15:26:54 +00:00
d2cf77cd51
support CANON N656U scanner
...
not tested :P
in order to check using scanner, someone should teach that
what should be used application?
2001-03-26 13:42:05 +00:00
224de64cd2
regen
2001-03-26 13:14:05 +00:00
20e7881e71
add VID&PID
...
CANON USBScanner Canoscan N656U
GREEHOUSE CF-writer with MP3 Player
2001-03-26 13:13:33 +00:00
9261ee5adc
fix typo
2001-03-26 12:58:44 +00:00
2350819ec5
support interrupt endpoint.
...
add more comment
2001-03-26 12:49:39 +00:00
2ef094d072
add UPLCOM_DEBUG
2001-03-26 12:40:39 +00:00
6c5da9bd76
o Change initialization for config_hook() base lcd control.
...
o Fix backlight control in case that light is controlable but not be
able to get status.
o change some verbose prints.
2001-03-26 09:40:45 +00:00
e884187819
Small code rearrangement.
2001-03-25 23:02:34 +00:00
0207e2ea75
Comment out some strange code.
2001-03-25 22:59:43 +00:00
24dfbb6c35
Regen.
2001-03-25 22:54:30 +00:00
68723be904
Add Atmel DWL-120 wireless LAN adapter.
2001-03-25 22:53:56 +00:00
a2c1a2899f
Try to make resume work on more machines.
2001-03-25 22:52:21 +00:00
d54c705158
Missing splx(). From OpenBSD.
2001-03-25 14:48:28 +00:00
51144af34f
improve readibility
2001-03-25 14:38:23 +00:00
fda74a0b78
add pcmb (i386)
2001-03-25 09:56:15 +00:00
06fc8b2014
Actually fix fwlynx correctly. Got the right filename this time.
2001-03-25 03:48:36 +00:00
a995ac4f75
eb is MI now, too.
2001-03-25 01:10:39 +00:00
8edd158910
MI(ish) EtherB driver using the MI SEEQ 8005 driver. Very lightly tested.
2001-03-25 01:09:36 +00:00
0ac712a013
Remove obsolete #defines.
2001-03-25 01:08:56 +00:00
39c267bb01
Tweak handling of multicast on 80C04. I think we need to set the match mode
...
to "multicast" for it to work, but I could be wrong.
Also make ALLMULTI work on 80C04, but this is untested.
2001-03-25 01:06:59 +00:00
56ac2cf6bc
Supply the extra arguments that seeq8005_attach() now needs.
2001-03-24 23:37:34 +00:00
304809f5f1
Re-arrange board memory to suit the current (crude) transmit code.
...
Add ea_writembuf() from mark's code, and re-work eatxpacket() to use it.
2001-03-24 23:31:06 +00:00
a9d20501af
Remove a comment; this module has not been compatible w/ BSD/OS's
...
for quite a long time.
2001-03-24 20:44:26 +00:00
b94b953e92
Enormous pile of changes from mark's (uncommitted) work on this driver.
...
About the only bit of his code not here is the transmit routines, which I'll
merge in separately.
Also a few bug-fixes, so (for instance) multicast on an 8005 doesn't
immediately fall back to IFF_ALLMULTI.
2001-03-24 20:38:41 +00:00
2dbd96c75c
There is no need to accept all ARP packets (regardless of destination
...
address) on the DP83815. Noted by Shiva Shenoy <shiva@riverstonenet.com>
in private correspondence.
2001-03-24 19:40:51 +00:00
2f3cc13258
add HP 620LX Japanese model keymap.
2001-03-24 17:33:12 +00:00
b83b8ac01f
Change all the register definitions to match the names using in mark's
...
improved version of the driver.
2001-03-24 13:40:41 +00:00
2e51f5568b
Get podulebus includes from the right place.
2001-03-24 12:58:51 +00:00
5171d409a5
First step to cleanup the hardware driver <-> upper layers interface.
...
This now provides slightly more functionality than the FreeBSD layer1-newbus
interface. It was meant to be a simple change to one header and a few
c files, but the change rippled all through various stuff.
To prevent a change to the kernel<->userland interface right now the kernel
is now lying about card types to userland (but who cares). This will be fixed
when the userland interface changes, after layer 3 <-> layer 4 has been
fixed.
Functional changes:
Provide a clean interface for hardware drivers to attach to the upper
layers. This will need another small change in the B-channel handling
when a similar change to the layer 3 <-> layer 4 interface happens.
Avoid passing indices into global arrays of pointers around, instead pass
the pointers itself. Don't code hardware driver types by predefined magic
numbers (think LKM). Prepare for detachable drivers (think pcmcia).
While there remove some sets of function pointers always pointing to the
same function (meant to be the configurable set of D channel protocol
handlers). It is unlikely another supported D-channel protocol will fit into
that (maximal layer interface) abstraction. When we get support for another
protocol, we will need to come up with a workable interface. Besides, the
old implementation was, uhm, strange.
2001-03-24 12:40:29 +00:00
887a4368ce
regen
2001-03-24 09:48:39 +00:00
c86a2420fb
Add couple AT1720 entries
2001-03-24 09:48:11 +00:00
3319b05361
There was a stray debugging message "OptionMode = %x\n". Prefix it with
...
the device name, and enable it only in debugging mode.
2001-03-24 02:04:40 +00:00
18db220fba
Handle IFF_ALLMULTI correctly. We can now cope with multicast, but for
...
some reason DAD fails when starting IPv6.
2001-03-24 00:16:41 +00:00
de791f82d8
"ea" is now borderline MI.
2001-03-24 00:15:38 +00:00
8bd452c648
Create an MI Ether3 driver. It's derived from the arm26 driver, which uses
...
my MI SEEQ 8005 driver, which is based on the arm32 ea driver.
2001-03-24 00:14:52 +00:00
70f969e600
if_wereg.h is no longer here.
2001-03-23 23:14:32 +00:00
d0b4b2499f
regen
2001-03-23 20:04:51 +00:00
7fe8df83a3
cosmetic change for autoconf printing: for memory extension cards,
...
just print ": configured" if they are enabled; they don't need any
special driver to work, printing "not configured" might be confusing
2001-03-23 20:04:28 +00:00
c3ba22cf5f
Forgot this one:
...
if_we.c was split and ISA-specific part is now in if_we_isa.c,
we(4) device is defined in conf/files.
2001-03-23 19:41:34 +00:00
75b7bea508
Add MCA we(4) attachment for WD80x3 cards and clones. Tested with
...
WD8003W/A, card provided by David Brownlee (thanks!). The SMC Elite stuff not
tested since I don't have any; hopefully it's correct, should match
information in ADF files.
The MCA-specific init quirk taken from Linux smc-mca.c driver.
I don't quite grok why it works, but it does *cross fingers*.
The WD8003W/A seems to be quite a good choice. I get like 340KB/s on my
machine, where 3c523 does only like 310KB/s. The numbers would be probably
even better with faster CPU than 386DX :)
2001-03-23 19:25:35 +00:00
43b0593b91
regen
2001-03-23 18:12:45 +00:00
593eb4314b
Change names of WD80x3x cards to what is in ADF's at
...
http://members.aol.com/mcapage1/adflist1.htm
Add couple IBM WD80x3x clones
Arrange so that appropriate defines are generated for WD80x3x cards
2001-03-23 18:12:13 +00:00
6d79f8ce1e
Split we(4) driver to bus independant and ISA-specific parts, in preparation
...
for MCA attachment.
2001-03-23 17:34:41 +00:00
2e3722d635
Remove a debugging printf.
2001-03-23 14:11:39 +00:00
b1e3063f0b
Move tx chain result handling into iystart(). This way, ww normally only
...
need an interupt when the hardware hits tx chain end. We switch on one
int per packet sent when we fill up and go into OACTIVE mode.
Measured total interupt savings on large NFS writes: 20%.
2001-03-23 13:15:27 +00:00
b240b7a4e1
#ifdef KGDB, call kgdb_connect(1) if KS_Cmd_Debugger (a la ddb invoking
...
console_debugger() in the same situation).
this makes it easier to get remote kgdb going if you forget to use boot -d.
2001-03-23 04:22:36 +00:00
51243a1c74
add Hugarian and German keymap
...
patch by Laszlo Szabo <rka@rka.hu>
2001-03-22 18:37:32 +00:00
031c6d8c24
Add MCA ep(4) attachment, for 3Com 3c529-type cards. Tested with 3c529-TP,
...
provided to me by David Brownlee (thanks!).
Performance of this card is quite poor on my PS/2 with 386DX, like 100KB/s
at best, but as low as 5KB/s when transferring bigger files due to
packet overruns. It would be good to revisit this later, probably by
teaching the ic code to use RX Early.
2001-03-22 16:54:45 +00:00
fe9376e508
Oops. We _do_ need to receive broadcasts. At least as long as we want ARP.
2001-03-22 14:30:47 +00:00
4ffa6a80d6
convert to use ether_ioctl()
...
fix bunch of typos
2001-03-22 12:00:26 +00:00
1d7d1bd0db
Regen.
2001-03-21 18:10:34 +00:00
984c03180f
Lower-case a few hex digits for easier searching.
2001-03-21 18:10:13 +00:00
fad8449663
Decrease the timeouts on QUEIESCE and CLEAR lest the adapter doesn't reply.
2001-03-21 14:27:05 +00:00
be5f917514
Add a small delay before reset at attach time, required by one old ATAPI
...
CD. Reported by Onno van der Linden.
2001-03-21 08:44:14 +00:00
b11582be50
regen for trident cyberclade
2001-03-21 01:10:06 +00:00
d54969d21f
Add Trident CyberBlade as found in Toshiba Satellite Pro 4600
2001-03-21 01:09:36 +00:00
998606396f
Move struct podule_list and struct podule_description to podulebus.h.
...
They're MI, even if only arm32 actually uses them at present.
2001-03-20 23:27:04 +00:00
86d6442c28
Move machine-dependent podulebus headers to <machine/podulebus_machdep.h>.
...
<dev/podulebus/podulebus.h> is the canonical file to include, and includes
<machine/podulebus_machdep.h>.
<arch/${MACHINE}/poudulebus/podulebus.h> remains for backward compatibility.
2001-03-20 22:59:39 +00:00
2ff439c85c
Add quirks for Panasonic MultiMediaCard adapter (attaches via USB).
2001-03-20 22:39:51 +00:00
93b623b541
Extend quirks to 32 bits. Add two new ATAPI quirks, one to
...
deal with a bad byte5 of the capacity descriptor, one to
handle devices that lack the flex geometry page.
2001-03-20 22:39:08 +00:00
66f705d045
Don't set up PDC2xx_SCR the same way for promise Ultra/66 & Ultra/100,
...
this special setup seems to break some adapters.
Reported by Kazushi Marukawa.
2001-03-20 17:56:46 +00:00
df43ec1064
Add BUS_DMA_STREAMING for the data bus_dmamap_load().
2001-03-20 17:54:39 +00:00
d7858fb571
Add RiscPC (arm32) keyboard. It basicly returns AT scancodes but since it has to
...
use a seperate keyboard driver (pckbdc not available) i cant guarantee that it is
100% compatible with AT scan codes
2001-03-20 15:51:18 +00:00
4cefebdf8d
Fix fall-out from previous change: the map's DMA address is valid only
...
after bus_dmamap_load().
2001-03-20 15:39:20 +00:00
056ea0d17a
+#include <dev/i2o/iopio.h>
2001-03-20 13:21:00 +00:00
ef80e73a4e
Split limits and ioctl defs out of iopvar.h.
2001-03-20 13:02:25 +00:00
ebf5110997
Major update; basically, improve performance somewhat and play nicer with
...
Intel and AMI IOPs. There still exists one nasty problem with Intel adapters
when under load, which I'm working on.
2001-03-20 13:01:48 +00:00
b10a79d548
regen
2001-03-20 00:41:19 +00:00
f921de978d
add sun device ids found on sunblade1000 systems.
2001-03-20 00:39:12 +00:00
b4d35ec9a7
ei(4) is now MI, in a limited sense at least.
2001-03-20 00:15:26 +00:00
90567f2deb
Quick hack to pull in podulebus.h for the current architecture.
...
This should be done better (probably with <machine/podulebus_machdep.h> later.
2001-03-19 23:59:33 +00:00
66261e4fd6
Shared arm26/arm32 version of arm26 Ether1 driver. Seems to work on both
...
architectures.
2001-03-19 23:58:12 +00:00
3dfa223aa3
Stylistic nit - don't use mca_devinfo(), print the info directly, we know
...
what we are attaching.
2001-03-19 22:33:35 +00:00
8a2d4dc652
regen
2001-03-19 22:24:17 +00:00
198b90eb12
Add entry for ATI AT1720T, another card I've got from David Brownlee.
2001-03-19 22:23:58 +00:00
e6d6148e4d
regen
2001-03-19 22:20:30 +00:00
4f0e120ebb
Add couple of Computone products; I looked up ADF for 0x61f3 (which
...
I am owner of) and found couple others as well.
Mark 3c529-type cards and IBM Internal modem for inclusion in mcadevs.h.
2001-03-19 22:20:05 +00:00
40d893a3f7
remove bogus ef entry
2001-03-19 21:58:09 +00:00
1c341b3d49
Provide MCA com(4) attachment. Tested with IBM Internal modem, kindly
...
donated to me by David Brownlee <abs@anim.dreamworks.com>.
2001-03-19 21:56:43 +00:00
89063179ad
enable I-O DATA WN-B11/PCM wlan card with WEP
...
reported by Shingo WATANABE <nabe@nabechan.org>
2001-03-18 21:13:12 +00:00
7c7a848854
regen
2001-03-18 21:12:01 +00:00
6fb0c29aed
add product I-O DATA WN-B11/PCM wlan
2001-03-18 21:11:30 +00:00
e6a3d0d5c9
Move generated files from sys/arch/arm32/podulebus to sys/dev/podulebus.
2001-03-17 20:32:00 +00:00
255336b13c
Migrate known-podules list from arch/arm32/podulebus to dev/podulebus.
2001-03-17 19:05:19 +00:00
9ca881a33a
the elmc initialization problem is hopefully fixed
2001-03-17 17:00:38 +00:00
bc5acf5f90
Move the code to write the interrupt number info back before the first card
...
reset (same place as in the Linux driver). Hopefully this would fix
the initialization problem I've seen previously (cannot repeat it
even without this change no matter how I play with the card).
Remove the comment about the initialization problem now.
2001-03-17 16:59:29 +00:00
daf7016248
* enable HPCFB_MULTI codes.
...
* delete unneed non HPCFB_MULTI codes.
2001-03-17 14:59:33 +00:00
79e48a7370
Regen.
2001-03-17 02:26:48 +00:00
4628dbd48d
Fixup some Intel Gig-E entries.
2001-03-17 02:26:26 +00:00
5ff8accde5
The 3c523 now driver works (with quite acceptable performance, like 320KB/s
...
for ftp and like 310KB/s via nfs); since there is still issue
with the card initialization, move the entry to bugs subsection
2001-03-17 00:19:36 +00:00
5f6a534773
regen - 3c523 entry change
2001-03-17 00:16:38 +00:00
4f637b65bc
adjust the 3c523 entry to fit the actual product name
2001-03-17 00:15:33 +00:00
668d11a549
add elmc (at MCA)
2001-03-16 23:04:01 +00:00
lukem