8601a37f8c
Protect to call fw_start() recursively.
2001-06-29 14:46:54 +00:00
5cf8e98cb5
Experimental support for LEAP, which is cisco's implementation of IEEE802.11
...
EAP in aironet firmware. Currently it seems that only cisco's RADIUS server
implements EAP for IEEE802.11, and the function is not tested at all.
2001-06-29 11:24:42 +00:00
4b9b2bd56c
Add some additional values to the keyvalue list from draft specs as some roms are using these and it would be nice to be able to identify them
2001-06-29 04:52:35 +00:00
c025feaea0
Add iha(4)
2001-06-28 15:46:00 +00:00
e88b10865c
simplify and localize to access sc_intmask in fwohci_event_thread().
2001-06-28 14:41:28 +00:00
3ad99107cb
Simplify to update sc_intmask in fwohci_intr().
2001-06-28 14:38:56 +00:00
a0eef76f35
FW_DEBUG: split debug printf in fwohci_intr() and fwohci_phy_input() into
...
fwohci_show_intr() and fwohci_show_phypkt() respectively.
2001-06-28 14:37:56 +00:00
e7e0a9984c
Do not re-enable the driver after resume if the interface is marked down.
...
Change the first argument of awi_init/awi_stop from struct awi_softc to
struct ifnet to match the definition if_init/if_stop, though we don't
use ether_ioctl() yet.
2001-06-28 10:40:04 +00:00
950ec87b20
Do not re-enable after resume if interface is marked down.
2001-06-28 10:34:17 +00:00
46e1a51e62
Add Tamarack Microelectronics, Inc. vendor ID, and product ID for
...
Tamarack TC9021 Gigabit Ethernet.
2001-06-28 04:45:09 +00:00
f54fe9f3b1
compile tweak for non-SCSIVERBOSE
2001-06-27 23:14:26 +00:00
67bde7ddf3
The back end driver doesn't need PCMCIA headers, but it does need
...
<machine/bus.h>.
2001-06-27 22:22:12 +00:00
ebaac3f1e0
Don't define Debugger() if it's already defined.
...
It is always defined on the sun[23].
2001-06-27 20:17:20 +00:00
1cf0b6f4ec
Added many sun2 entries.
2001-06-27 19:47:17 +00:00
656bb8c5c7
added Solidum PAX.ware 1100 and Lucent ORCA PCI targets
2001-06-27 17:57:23 +00:00
db6d5fc4a7
When setting/changing an address, no need to call ti_init() if the interface
...
is already up.
Especially this allow netatalk to start properly on a ti interface.
2001-06-27 16:47:33 +00:00
46a9744df4
enabling EMTAC A2424i Wavelan Card
...
It work fine.
2001-06-27 16:03:01 +00:00
6a91469e6d
Some ATAPI CD occasionally reports "ATA illegal indication length" for
...
a request sense command, but the sense is properly transfered anyway.
Ignore the error for this case.
2001-06-27 13:22:36 +00:00
4fadc33006
Better diagnostic when a REQUEST SENSE is terminated with CHECK CONDITION.
2001-06-27 13:21:30 +00:00
770912bb85
Add support for handling full-size 802.1Q packets.
2001-06-26 22:00:44 +00:00
90d0e67408
Add a XS_CTL_SILENT_NODEV flag: if the sense info is "not ready, medium
...
not present" don't print any message but still return ENODEV.
Use this in cd driver to allow open of character raw partition even if
the drive is empty (older drives fails at LOAD_UNLOAD time, newer
ones fail at TEST_UNIT_READY time).
2001-06-26 15:32:02 +00:00
f47d097cf5
Make it compile with SCSIPI_DEBUG
2001-06-26 12:46:56 +00:00
e27abfaddf
Make it compile with SCSIPI_DEBUG
2001-06-26 12:19:49 +00:00
65f0069f5b
restore awi_power() to reenable awi after resume.
...
... forgot why it is disabled...
2001-06-26 08:41:19 +00:00
3e2b22f383
Fix keyid bit position of encrypted packet to make non-first key usable.
2001-06-25 12:11:59 +00:00
4fe2f5eda7
AWI_DEBUG only:
...
awi_dump_pkt dumps packet before encryption in transmit.
2001-06-25 12:09:51 +00:00
b383383c20
Fix capability information in association request to reflect ESS/IBSS mode.
...
This fix is required to interoperate with Cisco's access point.
2001-06-25 12:06:14 +00:00
27a2f91b72
Add sc_flags to seeq8005_softc, and put a flag in it.
2001-06-25 11:38:28 +00:00
98f7903dd8
Don't reprogram SCC registers unless the values have changed.
...
Some CMOS Z85C30 SCC's (as used in the SGI Indy and Mips Magnum 3000's)
reset the baud rate generator when a new prescaler is loaded - despite
what is documented in the datasheet.
Avoids "character glitch" problems when line discipline characteristics
are changed at the start of the login process, or during a ftp session
on the /dev/console device.
Tested on -sgimips, -mipsco and -alpha platforms
2001-06-25 08:30:11 +00:00
ffd45d10e3
Invert the logic in last commit so that it actually works.
2001-06-25 06:44:41 +00:00
d38786d61f
fix printf to DPRINTFN inside FW_DEBUG
2001-06-25 04:52:26 +00:00
33fb36075d
Add a flag to the softc to prevent recursion in ifstart
2001-06-25 04:46:28 +00:00
a9f2f7b41b
add stubs for wiconfig(8).
2001-06-25 04:43:33 +00:00
1761d48452
cleanup unnecessary include files.
2001-06-25 04:29:19 +00:00
fda9cb9936
Avoid unused variables if RASTERCONS_FULLSCREEN is defined. (see PR#13231)
2001-06-24 15:47:45 +00:00
15223234d7
Fix some typos in comments.
2001-06-24 10:18:13 +00:00
e2f7c01bbd
This was able to crash my new alpha consistently when I started X.
2001-06-24 01:11:08 +00:00
abfd1d9e70
ea_mc_reset_8004(): Rather than doing the CRC32 ourselves, call
...
ether_crc32_be() to do it for us.
2001-06-23 17:32:21 +00:00
3177727ba7
Fix bogons in previous commit:
...
* Remove harmful debugging code from seeq8005_attach().
* Re-insert variable declarations in ea_mc_reset_8004(), since they aren't
dead yet.
2001-06-23 13:40:35 +00:00
9e396bc385
Attampt support for 8-bit mode. I believe this should work, but I need a more
...
flexible bus_space on arm26 before I can test it.
2001-06-22 20:31:55 +00:00
90b62cfa61
Don't include <machine/autoconf.h>, which should not be necessary.
...
Moreover, hpcarm doesn't have such a header file.
2001-06-22 14:38:44 +00:00
2ab206fbb5
Update, based on i8259a manual.
2001-06-21 18:57:04 +00:00
b1a2f97303
Also print DSA addr in a DIAGNOSTING printf.
2001-06-21 16:55:20 +00:00
8a46c28bc6
Proper media support for Compaq Deskpro 4000. PR kern/13244 from
...
Andrew Gillham.
2001-06-21 16:33:33 +00:00
b5e1e7d8ab
add #include <net/if_ieee80211.h> to make it compilable.
2001-06-21 14:02:56 +00:00
ea8bda451f
Add support for persistent key.
...
Fix promiscuous mode, taken from FreeBSD.
Fix to re-enable the card after suspend/resume.
Reflect current operational rate to if_media interface.
Avoid duplicate copy in transmit.
Move most of debug printfs into IFF_DEBUG.
Disable ANCACHE - designed for IPv4 only and no one use it.
Add IFF_ALLMULTI flags, as we don't have multicast filter.
Convert bzero/bcopy to memset/memcpy.
... sorry for jumbo commit.
2001-06-21 12:49:06 +00:00
0e7b0f3f43
add definitions for LEAP stuff in 350 series.
...
fix the value for AN_802_3_OFFSET to 0x34 (no one uses)
2001-06-21 12:33:24 +00:00
ee9070cc5a
Add a long-needed register descripton file for the i8259 PIC.
...
This was taken from the PIIX4 manual, and thus doesn't have all
the legacy crap (relative to "modern" ISA PICs, anyway), so if
you have a real i8259 manual, fill in some more bits.
2001-06-21 03:43:43 +00:00
bdfad3793f
We don't need to check for raidautoconfig here, so nuke it and
...
clean up a little.
2001-06-21 03:07:04 +00:00
ae2fb7473c
Regen; add/update 3Com 3CR990 products.
2001-06-20 19:52:19 +00:00
8e15530e96
Add more/update existing 3Com 3CR990 product IDs.
2001-06-20 19:51:12 +00:00
08415c62e6
Regen; add SysKonnect SKNET-GE.
2001-06-20 16:33:10 +00:00
70bbf8c3aa
Add SysKonnect SKNET-GE (GEnesis Gigabit Ethernet).
2001-06-20 16:32:32 +00:00
c633f47bfd
Regen.
2001-06-20 05:46:24 +00:00
34fe57df0e
Add O2Micro PCI-{CardBus,PCMCIA} bridges:
...
OZ6729, OZ6730, OZ6832/OZ6833, OZ6860 and OZ6812/OZ6872
2001-06-20 05:44:33 +00:00
f4e59879ce
support Raltek 8139-based Cardbus card
...
reported by Takayoshi Kochi(t-kouchi@mvf.biglobe.ne.jp )
kern/13252: RealTek 8139-based Cardbus support
2001-06-20 05:41:27 +00:00
f03f25cb17
regen
2001-06-20 05:39:36 +00:00
ba3eaf4273
add product RealTek 8139
...
by kern/13252: RealTek 8139-based Cardbus support
2001-06-20 05:39:17 +00:00
76d322c58c
#if out a few more bits that arn't required if we are not doing
...
PQ or RAID6.
2001-06-20 03:09:23 +00:00
35e011d31b
Convert to use cnmagic(9). Unifdef DDB and DDB_BREAK_CHAR.
...
While I'm here, s/ungetc/readahead/ in com_common_* because that's
what it _really_ is, "ungetc" is a very confusing name.
2001-06-20 03:07:25 +00:00
0b0010a7c3
When probing for a PHY, look at the EXTSTAT bit in the BMSR, as well,
...
not just the media mask. This prevents PHYs/TBIs that only support
Gigabit media from slipping through the cracks.
2001-06-20 01:42:41 +00:00
7e843c3ccb
Device driver for the Sundance Tech. ST-201 10/100 Ethernet. This
...
chip is found on the D-Link DFE-550TX.
2001-06-19 23:00:47 +00:00
7914a89b02
Add support for the Seeq 80225 10/100 Ethernet PHY. This is just
...
a stripped-down version of the 80220/80223.
2001-06-19 20:10:54 +00:00
93169d8a94
Regen; added Seeq 80225 10/100 PHY.
2001-06-19 19:51:27 +00:00
5d3c31d576
Add Seeq 80225 10/100 PHY.
2001-06-19 19:51:04 +00:00
ac951736bc
`response', not `responce'
2001-06-19 13:45:52 +00:00
3f9984fc90
`existent', not `existant'
2001-06-19 13:42:07 +00:00
f3f6c5b675
`accessible' only has one `a'.
2001-06-19 12:52:20 +00:00
dd270d4a3f
ifdef NISAPNP -> if NISAPNP > 0
2001-06-19 12:45:23 +00:00
b7f8c7eb86
delint
2001-06-19 10:43:26 +00:00
a8068ab82d
Don't use argument names in function declarations.
2001-06-19 08:24:07 +00:00
a7d6a8f2f1
The ifa is needed for CCITT&&LLC case, provide it in that case
2001-06-19 07:19:35 +00:00
0e8f8213af
A bunch of these bits are only needed for the EVENODD stuff.
...
Shaves a little better than 1K off the size of an i386 kernel.
2001-06-19 03:25:16 +00:00
62224968e1
Add support for the Adaptec AIC-6915 10/100 Ethernet. This is
...
a 64-bit PCI chip, available in 1, 2, and 4 port models.
2001-06-18 22:05:35 +00:00
319ea4a342
make it compilable: delete unused variable 'ifa' from lance_ioctl()
2001-06-18 13:47:18 +00:00
c07d2e1e96
Add Cisco/Aironet 350
...
Reported by Wolfgang Rupprecht <wolfgang@wsrcc.com>.
This doesn't fix PR 13181, which says the card doesn't work well.
2001-06-18 13:21:24 +00:00
e523b2f091
regen: Add Cisco/Aironet 350
2001-06-18 13:19:07 +00:00
61285ac2da
Add Cisco/Aironet 350
2001-06-18 13:18:08 +00:00
e65b619faa
Convert to use ether_ioctl() for SIOCSIFADDR and SIOCSIFFLAGS.
2001-06-18 11:06:26 +00:00
49ed2592ce
Add my copyrigth and remove the older ones. None of the original authors of
...
the st driver wrote something in this file.
2001-06-18 09:41:06 +00:00
0a63f01fef
Snapshot of ATAPI tapes support. Known to be able to read/write to tape with:
...
st0 at atapibus0 drive 1: <Seagate STT8000A, , 5.51> type 1 sequential
removable
Major changes may still happen in order to properly support other ATAPI
tape drives.
2001-06-18 09:05:05 +00:00
1506d21315
Make error checking/reporting a little more correct.
2001-06-18 01:58:08 +00:00
de98ab5b38
Regen.
2001-06-17 19:51:27 +00:00
b63b6d01e6
Add device IDs on the new iBook.
2001-06-17 19:50:33 +00:00
adaaf11f9f
make pckbc_slot_names[], pckbc_portcmd const
2001-06-17 16:15:41 +00:00
4c49d6fa2a
Split the Tx and Rx interrupt routines into separate functions,
...
and add some (optional) event counters.
2001-06-15 22:16:00 +00:00
f71391cb6c
Move the check for successful attachment to earlier in the detach
...
routine, to avoid referencing nonexistent data structures.
2001-06-15 18:05:36 +00:00
ddc6e8e6ad
I've got an 8-bit Ether3, so I've discovered that the address mapping is
...
non-linear. Comment it here so I don't forget.
2001-06-15 00:28:01 +00:00
60a0137d9c
Ooops- we need to allocate an array of pointers to scsipi_xfer structures
...
isp_maxcmds in length- not an array of scsipi_xfer structures isp_maxcmds
in length.
2001-06-14 19:54:07 +00:00
4d51fe368b
change the meaning of ifnet.if_lastchange to meet RFC1573 ifLastChange.
...
follows BSD/OS practice and ucd-snmp code (FreeBSD does it for specific
interfaces only).
was: if_lastchange get updated on every packet transmission/receipt.
now: if_lastchange get updated when IFF_UP is changed.
2001-06-14 05:44:23 +00:00
669f5cc5a5
It's silly to need a parity rebuild after a reconstruction has completed.
...
If we've just reconstructed a disk, then the parity is known to
be correct. (XXX doesn't hold for RAID 6!)
2001-06-14 02:35:56 +00:00
3078a3d26d
It's pretty questionable to printf a PCI tag, but if we're going to
...
do so, at least make the printf compile across the board.
2001-06-14 01:06:56 +00:00
a9d7b546d6
make this work.
2001-06-13 19:02:13 +00:00
bb5ca33de4
Add a driver for the HCCS IDE interface I got at Wakefield. Like the D.T.
...
Software one (dtide), it doesn't generate interrupts, so we run it in polled
mode.
2001-06-13 18:31:43 +00:00
18c4c9eab3
Update to use the new support for IRQ-less IDE controllers.
...
Also generally re-work to do channel attachment in a loop, since that saves on
code size.
2001-06-13 18:29:40 +00:00
6acf237023
Use the new generic mechanism for forcing polling on a SCSI interface, rather
...
than doing it ourselves.
2001-06-13 18:27:27 +00:00
4bc5a3b295
Add explicit support for IDE and SCSI adaptors which don't support interrupts.
...
On such adaptors, all transfers are done in polling mode.
OK'ed by Manuel on tech-kern.
2001-06-13 18:17:38 +00:00
a865af9ad5
Enable attachment for Kingston KNE-PC2 Ethernet.
2001-06-13 13:41:01 +00:00
c03a48d64f
withough -> without
2001-06-13 10:45:57 +00:00
e13606c37b
Workaround for buggy OPTi pciide chipset revisions, as reported
...
in PR/11644.
2001-06-13 09:55:25 +00:00
d9db68b3fe
be more specific about which interlan controller the qbus/if_il supports
2001-06-13 06:40:19 +00:00
6c4e6292a5
Regen; add IBM 405GP PCI Bridge & ROB-in i960RP Microprocessor.
2001-06-13 06:04:25 +00:00
18b2f7e6a1
Add a port to IBM's PPC405GP Reference Board (the "walnut")
...
by Eduardo Horvath and Simon Burge of Wasabi Systems.
IBM 4xx series CPU features:
- New pmap and revised trap handler.
- Support on-chip timers, PCI controller, UARTs
- Framework for on-chip ethernet and watchdog timer.
General PowerPC features:
- Add in-kernel PPC floating point emulation
- New in{,4}_cksum that is between 1.5 and 5 times faster than the
old version depending on CPU type.
General changes:
- Kernel support for generic dbsym-style symbols.
2001-06-13 06:01:44 +00:00
015345c74b
Don't need INET or NS includes here.
2001-06-12 22:32:51 +00:00
9988acd41e
Don't need INET or NS includes here.
2001-06-12 22:28:15 +00:00
e103dbb4b0
Don't need NS-related headers here.
2001-06-12 22:05:53 +00:00
18e8d752f6
No need to pull in INET or NS headers -- that's all done by ether_ioctl() now.
2001-06-12 20:53:39 +00:00
0a600be867
receive, not recieve
2001-06-12 15:17:10 +00:00
2a8c778f1b
retrieve, not retreive
2001-06-12 14:59:27 +00:00
cb6b68a931
Mention where I got the information for writing the driver.
2001-06-12 11:52:03 +00:00
f6f3c9b35f
Add a hefty comment about the stray IR bug, so I don't forget it.
2001-06-12 11:49:18 +00:00
b50f28c38a
underrun, not underun
2001-06-12 11:48:51 +00:00
1f4eee4c21
In wsfont_map_unichar: when checking that 'lo' is within 'map2' range,
...
compare 'lo', not 'hi' (only partially edited cut-n-paste it seems).
2001-06-12 00:57:10 +00:00
33afab3251
Add a short-circuit return from wdcprobe for IDE controllers without pullup
...
resistors, which return the last value written to the bus on a read. This
makes detecting empty channels on my HCCS and D.T. Software IDE interfaces
rather faster.
2001-06-11 21:18:36 +00:00
fb2f3ce7e5
Regen; Add Level One vendor ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:13:49 +00:00
ec5280c1ed
Add Level One product ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:12:29 +00:00
274629aa08
Added support for the VME `sc' SCSI board. Compiles,
...
but needs testers as the author doesn't actually have
the hardware.
2001-06-11 15:09:54 +00:00
b9e61207ff
Add nolun/nosync quirk for "IBM CDRM00201 !F"
...
See PR#13031.
2001-06-11 13:58:18 +00:00
a2c4938b03
not set HPCFB_SWAP_BYTE
2001-06-11 09:36:44 +00:00
a4401a8e5d
Regen from "pcidevs".
2001-06-11 06:36:51 +00:00
6caf1041cb
Add support for the D-Link DFE-530TX+. Patch supplied by
...
Gabriel Rosenkoetter in PR kern/13161.
2001-06-11 06:36:23 +00:00
40ac848024
Fix various misspellings of compatible/compatibility.
2001-06-11 01:50:48 +00:00
0a3b1c29a1
transceiver, not transciever.
2001-06-11 01:19:53 +00:00
6fee8596c7
Packet includes CRC, so mark it in the mbuf header. Fixes the
...
"discarding oversize frame (len=1518)" problem.
2001-06-10 21:53:08 +00:00
01c6253206
Only use b_proc if B_PHYS is set.
2001-06-10 18:41:27 +00:00
d29b7bb88c
Regen from "usbdevs".
2001-06-10 13:10:46 +00:00
8a6a34f18e
Add Philips PCA646VC PC Camera.
2001-06-10 13:10:25 +00:00
5a051092e4
Rename ofb_softc to ofbus_softc. (XXX Is this good name?)
2001-06-10 11:36:03 +00:00
bfac43a1c8
Centralise the geometry fudge.
2001-06-10 10:48:42 +00:00
5f1286dfb9
Don't make assumptions about the contents of the system drive table.
2001-06-10 10:34:44 +00:00
737763fde7
Forgot to commit this as part of the mvme68k evcnt(9) changes.
2001-06-10 08:27:42 +00:00
acf06d2e27
If the adapter is returning a selection timeout, then we should be
...
returning XS_SELTIMEOUT, not XS_TIMEOUT. Pointed out by Andrew Doran.
2001-06-09 18:08:20 +00:00
8c948a0386
Patches from takashi.yamamoto@bigfoot.com in kern/13139.
...
- Set XS_TIMEOUT on a selection timeout condition.
- Do not bother to call AscStartChip() in AscResetChipAndScsiBus()--
just clear the chip status.
- Make sure address is word-aligned in AscWriteLramByte().
Tested on my adv (AdvanSys ABP-9xxUA) with CRW8424S and UMAX SuperVista S-12.
Earlier versions of the system would get stuck trying to recover from error
conditions when the CD-RW drive was in heavy use. I have not seen that
behavior with these small patches.
2001-06-09 17:18:21 +00:00
810a0b00f4
dtide is MI now.
2001-06-09 13:51:49 +00:00
14f1650c62
Remove unused members from SCSI command block structure.
2001-06-09 13:43:02 +00:00
9cd36c6539
Fix an uninitialized variable in #ifdef DIAGNOSTIC.
...
Pointed out by soda.
2001-06-09 12:59:50 +00:00
e609865bbc
Correct reference to dtide.c, and don't bother with the "channel" locator to
...
dtide, since ata provides that anyway.
2001-06-08 22:33:59 +00:00
ca2047f7c6
Adapt the dtide driver to the MI podulebus framework, and move it to its new
...
home. It still doesn't actually work, but that's a SMOP.
2001-06-08 20:13:24 +00:00
837afd713e
Regen
2001-06-08 20:09:07 +00:00
e918a481e5
Move D.T. Software to their rightful place in the list, and correct the product
...
ID for their IDE interface. I've no idea where 0x00ae came from.
2001-06-08 20:08:35 +00:00
054673b07c
#endif /* takes no argument */
2001-06-08 12:51:17 +00:00
578730c551
Initialize sc->sc_anegticks to 5 on attach to prevent panic due to
...
assertion failure.
2001-06-08 07:09:40 +00:00
e5bd00e48d
For ports that wire up pciide in compatibility mode, have
...
them define __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
in pci_machdep.h and pciide_map_compat_intr() only calls
pciide_machdep_compat_intr_establish() if that preprocessor
define exists.
Ports that don't need to do this no longer need to supply a
dummy function.
2001-06-08 04:48:54 +00:00
ef047f21f8
Add multiple inclusion protection. Define prototypes for openfirm
...
routines used in cdevsw.
2001-06-08 00:19:17 +00:00
59024512bd
LKM friendly: move ev_out32() to netbsd32 specific code; add an ev_out32 hook.
2001-06-07 17:52:52 +00:00
7a3a78cfa3
Compile on sandpoint.
2001-06-07 16:48:09 +00:00
df4739c8cb
Set TI_OPMODE_1_DMA_ACTIVE only if hardware assisted checksum isn't used
...
(FreeBSD does it this way). My Tigon II works with hardware assisted checksum
now.
2001-06-07 14:35:58 +00:00
85fb541842
Fix typo; print sc->aue_intr_errs instead of sc->aue_rx_errs when
...
reporting interrupt errors.
2001-06-07 10:55:15 +00:00
72510eee6d
Make the WDC_{ATA|ATAPI}_NOSTREAM flags settable through configuration
...
options. Needed on the Atari Milan.
2001-06-07 06:33:48 +00:00
ff5871412e
Correct the receive mode mask in the RXCMD register.
2001-06-07 05:19:26 +00:00
025decbccb
Don't clear a callout on a scsipi_xfer that has been scsipi_done()'d.
2001-06-07 03:44:00 +00:00
26603afde8
Update URL to documentation PDF.
2001-06-06 22:11:42 +00:00
03e1c3aa16
implement HPCFB_SWAP_BYTE.
2001-06-05 17:29:12 +00:00
b596bfa2d0
add vc_reverse flag to struct video_chip.
2001-06-05 15:02:40 +00:00
a4221d6b08
change behavior of cmap_work_alloc().
2001-06-05 15:02:12 +00:00
15f8692183
Make some functions __inline.
2001-06-05 12:42:44 +00:00
8ee014b439
Handle the DL10022 case.
2001-06-05 02:31:16 +00:00
c619444a71
Use the DL10019 media routines on the DL10019 and DL10022 (a change
...
I forgot to commit long ago).
2001-06-05 02:27:02 +00:00
cae5d5a796
Lock the kernel lock at interrupt enter.
2001-06-04 21:31:28 +00:00
46762d3560
fix lint exposed by GCC 3.0 20010604 (prerelease).
2001-06-04 20:56:51 +00:00
859a6a49b2
ANSI KNF.
2001-06-04 18:59:31 +00:00
07677cc805
Use back the 'u'&037 form - since it's CTRL-u, it's more readable that way
...
Use \007 instead of symbolic constant, since that's what is more often used.
Pointed out by Robert Elz.
2001-06-04 09:45:03 +00:00
147c9186b5
Remove overly paranoid test (and not in the spec either). From OpenBSD.
2001-06-04 06:01:40 +00:00
d7079b251e
Regen.
2001-06-04 06:00:43 +00:00
db2a5598b4
Add the Logitech iFeel mouse.
...
(Now that's a weird device, perhaps I'll write a driver for the vibration
feedback.)
2001-06-04 06:00:20 +00:00
13aba87bcb
Don't pass nonpositive repeat count to CSR_*_MULTI_2.
...
Should fix kern/13092.
2001-06-04 03:34:47 +00:00
4cfd2cf1d0
s/printf/DPRINTF/ for kern/13101.
2001-06-03 23:52:51 +00:00
dccf11ae11
cngetsn(): cosmetic only - use '\025' instead 'u'&037, and '\b' instead '\007'
2001-06-03 17:56:10 +00:00
056e20f2cc
Need to get the kernel lock when entering by interrupts.
2001-06-03 15:15:02 +00:00
461a7daf74
fix comment
2001-06-03 14:29:42 +00:00
bcdd082840
Add a driver for the Initio INIC-940/950 PCI SCSI controllers.
...
Based on OpenBSD's iha driver, and modified some structures by me.
Tested on arc, i386 and macppc.
2001-06-03 13:43:45 +00:00
4e7cb03446
Differentiate between a DL10019 and a DL10022 (they have slight
...
MII differences).
2001-06-03 04:52:28 +00:00
37368cb858
Use the correct bitbang ops on the DL10022 (oops!).
2001-06-03 04:39:52 +00:00
cc3002d53b
Clarify a historical comment.
2001-06-03 03:55:10 +00:00
f75e45c854
In ti_init2(), use a simpler, more obvious, and correct MTU
...
calculation to give the firmware.
2001-06-03 03:46:43 +00:00
f2b9a1f3cc
Replace a bunch of home-grown Ethernet related constants with
...
ones defined in <net/if_ether.h>
2001-06-03 03:29:44 +00:00
9987ee5249
Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet
...
PHYs. This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
2001-06-02 21:42:10 +00:00
424f7a1e65
Make PHY matching all table-driven.
2001-06-02 21:39:38 +00:00
947699688a
Create hcscreg.h, and put a couple of magic numbers in there.
2001-06-02 20:13:50 +00:00
ca4d373730
Implement support for IP/TCP/UDP checksum offloading provided by
...
network interfaces. This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us. In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software. This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.
We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.
Note: hardware-assisted checksumming defaults to "off". It is
enabled with ifconfig(8). See the manual page for details.
Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
2001-06-02 16:17:06 +00:00
9590a56496
Use bus_space_{read,write}_multi_stream_2 where available.
2001-06-02 15:49:16 +00:00
fd7e9d6d32
Clean up hcsc_match: Don't check the manufacturer ID, since podule IDs are
...
unique anyway. Do check whether the description starts with "SCSI", since
HCCS used the same ID for their IDE podule.
2001-06-02 12:07:34 +00:00
e9ff9b9d73
Enable disconnect/reselect (now that it works) and parity checking.
2001-06-02 11:43:40 +00:00
2da55b9a39
Define some extra configuration block bits used on the i82550 (a.k.a.
...
PRO 100/S), including the extended RFA format. Don't hard-code the
RFA size to allow us to use the extended format in the future.
2001-06-02 01:04:01 +00:00
f6af05f407
Back the last revision off, upon Bill Sommerfeld's request
2001-06-02 00:46:00 +00:00
5dbe622e77
When polling, raise priority level to tty, to block keyboard interrupts
...
when the system is "warm", i.e. interrupts are not blocked anymore.
This seems to be necessary on my PS/2 Model 70 keyboard - without this,
system ends up in endless loop calling the keyboard intr routine if a key
is pressed when polling. This _may_ be just specific to level-triggered
interrupts PS/2 MCA uses, though it's more likely it's just the way the
particular keyboard controller works.
Discussed on tech-kern@.
2001-06-02 00:01:04 +00:00
33a6994da1
Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
...
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
1331bcc296
cardbusvar.h is divided into two files: cardbusvar.h and cardbusreg.h.
2001-06-01 10:30:37 +00:00
88f3192778
Fix typo in sddump() which caused core dumps to fail with ENXIO.
2001-06-01 08:39:54 +00:00
b3e7ecfd97
Delete the XXX'd includes of <dev/isa/isavar.h> and <sys/kernel.h>.
...
These aren't needed. Tested on i386 and alpha.
2001-06-01 00:38:31 +00:00
264d7e1264
Install "dev/scsipi/scsipi_cd.h" again because it is e.g. used by the
...
CD player include in version 2.x of the "kdemultimedia" package.
2001-05-31 21:54:07 +00:00
996df042df
Add support for the DP83815 MacPHYTER internal PHY to the DP83843 PHYTER
...
driver, since for our purposes, they are compatible.
2001-05-31 20:30:21 +00:00
1042f830e5
Regen; added several more PHYs.
2001-05-31 19:41:07 +00:00
0c94166e28
Add several additional PHYs.
2001-05-31 19:40:33 +00:00
f752c7d328
On the Gig PHYTER, For whatever reason, the 10baseT-related bits of the
...
BMSR are wired to 0, yet the PHY supports 10baseT. So, to get around
this, we test the ANAR 10baseT bits after a PHY reset. These bits are
set according to input pin 180. If we see the 10baseT ANAR bits set,
we fake them in the BMSR so that we can actually autonegotiate 10baseT.
2001-05-31 18:47:22 +00:00
2128d9199a
Enable frobbing the 1000baseT control register on Gig-E PHYs,
...
used for hard-wiring master mode, and for advertising the 1000baseT
media options during autonegotiation.
2001-05-31 18:44:48 +00:00
628a67ab31
Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER
...
10/100/1000 PHYs.
2001-05-31 16:06:58 +00:00
ea1aed7db2
Make the number of ticks between auto-negotiation tries PHY-specific,
...
and default every PHY to 5 seconds (what we used before). If we find
Gig-E media on a PHY, bump it to 10 seconds, since it can take 5
seconds just to negotiate a Gig-E link.
2001-05-31 16:02:29 +00:00
f4afeda420
Reduce the delay when polling so that dumps go faster.
2001-05-31 11:31:43 +00:00
4d3b32a658
Cosmetic change.
2001-05-31 08:33:40 +00:00
ad090e7062
Regen; added NatSemi DP83891.
2001-05-31 03:32:38 +00:00
3ae72855b1
Add product ID for the NatSemi DP83891 1000baseTX PHY.
2001-05-31 03:32:20 +00:00
9f63d3cd86
Typo in last.
2001-05-31 03:07:14 +00:00
f07f44812d
The 1000baseT CR and SR are overlapped with the 100base-T2 CR and SR.
...
Note this in a comment. Add the 1000baseT CR and SR bits.
2001-05-31 03:06:46 +00:00
e7c225d7b2
Regen; product IDs for IDT RC32334 and RC32332 systeml controllers.
2001-05-31 01:13:33 +00:00
811d8d9102
Add product IDs for IDT RC32234 and RC32334 system controllers.
2001-05-31 01:10:34 +00:00
3fccfbf68d
Uninitialised variables, from Krister Walfridsson: in umass_scsipi_request()
...
initialize cmd before using it. Now that it's initialised earlier, use it
instead of xs->cmd
2001-05-30 20:31:39 +00:00
6973b27309
Uninitialised variable (from Krister Walfridsson): in acard_chip_map()
...
drop compatchan and use the real channel number instead.
2001-05-30 20:30:02 +00:00
708bb529d3
uninitialised variable (from Krister Walfridsson):
...
in st_cmprss(), init flags to 0 (never changed, but this should change soon
anyway, for ATAPI tapes support)
2001-05-30 20:28:17 +00:00
d84d2c6c85
add missing #include "opt_kgdb.h"
2001-05-30 15:24:23 +00:00
c13e3a6693
use _KERNEL_OPT
2001-05-30 11:40:35 +00:00
f591dd2f9d
Cosmetic change.
2001-05-30 09:21:47 +00:00
ffcbc851a0
fix some problems in sddump() with uninitialized variables.
2001-05-29 01:02:39 +00:00
c5260261ba
Use the pseudo-DMA facilities of the HCCS SCSI podule. Code largely derived
...
from the pc532 "ncr" driver.
This gets me up to 300 KB/s from /dev/rsd0a on my A310. I think
bus_space_{read,write}_multi_1 and copy{in,out} are the bottlenecks now.
2001-05-28 22:54:10 +00:00
83da433ada
fix for UX96 (and all Yamaha specific devices, hopefully).
...
- fix how to get endpoint addresses.
- fix allocate count of pipes.
- add necessary null checks for asymmetry jacks.
2001-05-28 20:52:06 +00:00
5505749bb1
add new device; Yamaha UX96 USB MIDI I/F.
2001-05-28 18:28:04 +00:00
a62b5c1e2e
add a comment why IFF_PROMISC is handled separately for SIOCSIFFLAGS:
...
Handle special case for IFF_PROMISC. If only IFF_PROMISC
flag is changed, do not call an_init() to avoid initiating
reassociation to another access point. It is really
helpful for tcpdump(8).
2001-05-28 00:46:35 +00:00
ebf9e47c26
Add quirks for the Algorithmics P-5064 on-board 21143, and a way to
...
get the Ethernet address from it (they don't have an SROM).
XXX The latter should be replaced with devprops when they exist.
2001-05-27 21:00:33 +00:00
667dd41596
Remove ethernet CRC on received packets.
2001-05-27 19:36:06 +00:00
47745a094d
Add support for the Algorithmics ISA floppy controller.
2001-05-27 18:16:21 +00:00
ce289cc293
Handle non-contiguous BARs. Needed to be able to configure e.g.
...
IDE and USB on a PIIX3.
2001-05-27 17:50:40 +00:00
cbea766fd0
Add hcsc.
2001-05-26 23:02:06 +00:00
5cc459efcc
Quick hack of a driver for the HCCS 8-bit SCSI podule, based on the Oak driver.
...
Tested to the extent that it finds my disc.
2001-05-26 23:01:19 +00:00
ebf4596009
regen
2001-05-26 21:48:31 +00:00
eb6eb503f1
Fix typo in last commit.
2001-05-26 21:48:21 +00:00
7b0faa44c9
regen
2001-05-26 21:47:30 +00:00
d5ecc6c516
Add the 8-bit podules I got at Wakefield (except the A3000 Nexus,
...
which seems not to work).
2001-05-26 21:47:09 +00:00
41faed1386
Use cdev_decl() instead of local prototyping.
2001-05-26 21:24:38 +00:00
6d8a82ebc2
Use bus_space on arm26.
...
Update the comment to match list of bus_space-using ports.
Delete oak from list of drivers that need converting.
2001-05-26 20:55:48 +00:00
ab0637016a
Support NCR5380_USE_BUS_SPACE.
...
Add comments explaining the card a bit (and how badly we support it).
Add in-core RCSID.
2001-05-26 20:53:53 +00:00
bab53421c4
"oak" is now MI.
2001-05-26 17:50:30 +00:00
c7a388d937
Turn "oak" into an MI podulebus driver. Tested on my new A310.
2001-05-26 17:49:46 +00:00
f0ebb6c5a8
Add a comment about acemidi.
2001-05-26 17:47:45 +00:00
c9de53f96e
Create a kernel thread for Fibre Channel cards. This is the new
...
way of doing business- modulo some startup spasms and peculiarities
of the way kthreads are started (*after* configuration, weird) and
some strangeness with the freeze/thaw code, what now happens is
that any of Loop Down, LIP, Loop Reset or Port Datbase or Name
Server Database Changed ASYNC events cause the queues to freeze
for this channel. The arrival of a Loop UP is not relevant.
What *is* relevant is that the Port Datbase or Name Server Changed
async event indicate that it's okay to go and (re)evaluate the
state of the FC link and (re)probe local loop and fabric membership.
We have a kthread do this because it's *sooooo* much nicer to be
able to sleep while doing the 130-250 mailbox commands it'll take
to re-evaluate things.
When the state is well known again, we can unfreeze the channel
queues. Then, as commands start arriving, we simply can start them
or bounce them with XS_SELTIMEOUT (if the device in question has
gone away). Previously, we did lazy evaluation, which meant that
if a change occurred, we would wait until the very *next* command
to go rebuild stuff.
The reason this is not sensible is:
a) Even with sleeping, you can hang up your system because you might be
making some poor stat(2) call pay the price of re-evaluating the whole
fabric.
b) If we ever really want to get to dynamic attachment/detachment, we
should find out sooner, rather than later, where things get to.
Split off ispminphys_1020 from ispminphys- a 1020 has a 24 bit limit-
not anything newer.
Re-enable LIPs and Loop Resets as async events- this allows the outer
layer to set policy about them.
Roll platform major && minor. Remove bogus waitq (no longer used).
Remove callout entry in softc (no longer used). Define some shorthands
for channels. Clean up a variety of cruft left over from the
thorpej_scsipi changeover.
2001-05-25 21:45:55 +00:00
5b51f5ebe2
fix forgotten/malformed initialization of some variables.
...
(pointed out by Krister Walfridsson.)
2001-05-25 19:33:36 +00:00
339a9c8de2
Fix two typos in the BYTE_ORDER != LITTLE_ENDIAN case.
2001-05-25 08:54:40 +00:00
6229248ec0
minor style
2001-05-24 08:12:28 +00:00
85efd7edb1
correct multicast filter handling. without this, we cannot run IPv6 on an*.
2001-05-24 08:06:04 +00:00
9d59ae231c
adjust fas register fields names
2001-05-23 18:32:26 +00:00
a98b728b88
Call scsipi_channel_thaw() after scsipi_done() so that command ordering
...
is preserved.
2001-05-23 15:51:32 +00:00
72b4ba8aed
In scsipi_channel_thaw(), if the count drops to 0, call scsipi_run_queue().
2001-05-23 15:50:32 +00:00
fae4d6d720
fix typo in previous revision so that the scsi code compiles again.
2001-05-23 02:16:19 +00:00
24b32e8f08
Add missing definitions for hw checksumming.
2001-05-23 00:56:58 +00:00
d298a26243
Add back in (again) ISPASYNC_LIP and ISPASYNC_LOOP_RESET async
...
notifications. Let each platform set policy as to what to do
with these.
2001-05-22 19:32:41 +00:00
b9eb902304
Make SDRETRIES an option you can dig out of opt_scsi.h.
...
Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the
normal 60 * 1000 timeout for normal read/write commamds. This allows you
to shorten or lengthen the timeout as needed.
2001-05-22 18:59:57 +00:00
38f6ada8b6
Add SDRETRIES and SD_IO_TIMEOUT option for sd.
2001-05-22 18:58:15 +00:00
607b14bf7b
Add mii_bitbang attribute to gsip, pointed out by Andrew Gillham.
2001-05-22 16:58:23 +00:00
a888f6ef73
If the cache line size in the BHLC register is not configured,
...
then clear the MRL/MRM/MWI command-ok flags when attaching a
device.
2001-05-22 16:10:44 +00:00
79859fb138
Regen.
2001-05-22 16:07:56 +00:00
6e2bc5b352
Enable the PCI MWI command for memory writes on the i82558 and
...
higher.
2001-05-22 16:05:01 +00:00
onoe