81bac16312
add CARDBUS_SUBCLASS_COMMUNICATIONS_SERIAL
2000-04-13 10:11:15 +00:00
fa13d97855
this does not need auxreg.h
2000-04-13 09:54:43 +00:00
b60fe7f45a
store all the physical address bits.
2000-04-13 09:53:49 +00:00
e7f3d69787
this does not need auxreg.h
2000-04-13 09:52:46 +00:00
542f08a422
add a version file.
2000-04-13 09:38:12 +00:00
f2ab01bf42
copy the "sparc" clean/cleandir target code, so that "cleandir" actually does a "clean"
2000-04-13 09:23:38 +00:00
c81c7aa367
always define PI_MAGIC so this compiles in all cases.
2000-04-13 00:44:19 +00:00
d5d6c20e74
Regen
2000-04-12 21:13:12 +00:00
e083abcad8
Add support for the SOHOware PCMCIA Ethernet card, model ND5100-E.
...
This seems to be a re-badged NDC (National Datacomms. Corp) card.
It needs a quirk entry due to lack of manufacturer tuple in the CIS.
For some reason, the 'Tx/Rx' LED on the connector module is inverted
such that it is off during network activity...
2000-04-12 21:07:55 +00:00
44c22dc618
make this compile with -DDEBUG_SVR4 [wrong variable name]
2000-04-12 15:13:15 +00:00
e3004f2598
make this compile with -DDEBUG_SVR4 [lossage because sizeof is u_long now]
2000-04-12 15:12:13 +00:00
a3c99d2662
Dialog Box style key function. You can push space key to boot.
2000-04-12 15:07:34 +00:00
eba24e4799
* Spell shift counts in decimal and masks in hex
...
* Optimize numerous array references
* Cleanup whitespace turds
2000-04-12 14:22:28 +00:00
6008cfd5de
Remove bogus "#ifdef EIDRM" checks and warnings that BSD doesn't define
...
EIDRM - EIDRM was added over two years ago!
2000-04-12 13:08:26 +00:00
a388797ed5
Ignore unknown devices on mainbus.
2000-04-12 11:40:12 +00:00
ea3e5a38b8
Fix from Ethan Solomita <ethan@geocast.com> to avoid a livelock problem
...
where the buffer cache code would be recycling B_AGE buffers with
dependencies.
2000-04-12 11:33:43 +00:00
c24f5b5068
add more IPv6 cases. not tested.
...
TODO: IPv6CP support. currently IPv6 packet will be generated right
after link up (spec violation)
2000-04-12 10:51:15 +00:00
ecb5f2e56a
revisit in6_ifattach().
...
- be persistent on initializing interfaces, even if there's manually-
assigned linklocal, multicast/whatever initialization is necessary.
- do not cache mac addr in the kernel. grab mac addr from existing cards
(this is important when you swap ethernet cards back and forth)
now ppp6 works just fine!
call in6_ifattach() on ATM PVC interface to assign link-local, using
hardware MAC address as seed.
(the change is in sync with kame tree).
2000-04-12 10:36:38 +00:00
397c7cc20c
Merge all missing changes from sys/i386/i386/pmap.c;1.88.
2000-04-12 06:23:21 +00:00
e7206926ef
Add a comment block describes what the intent of safepri global variable
...
as "During autoconfiguration or after a panic, a sleep will simply ..."
2000-04-12 04:40:50 +00:00
cce3288e2f
Backout the previous change; safepri is an evil idea after all.
2000-04-12 04:30:35 +00:00
6040f9fa38
remove sunos stuff.
2000-04-12 04:21:22 +00:00
b9c0393d3f
remove support for sunos and ancient BSDs.
2000-04-12 04:20:47 +00:00
1f7a988bd2
unconditionalize "ifdef sparc".
2000-04-12 04:06:41 +00:00
19156689a9
- Abandon processor type check for R3000 or R4000/R4400 because VAX
...
processor is unlikely able to boot the kernel.
- Correct comments about what mach_init() and cpu_startup() do.
- Relocate cn_tab = &promcd to make ROM console printf() work in the
earliest stage of boot.
2000-04-12 03:05:08 +00:00
aca4545896
Markus Kilbinger <kilbi@rad.rwth-aachen.de>, reported that https: does not work.
...
The reason is that netscape tries to do stream operations on a plain file. So
we avoid that...
2000-04-12 02:46:41 +00:00
a889c809fd
MIPS1_PSL_LOWIPL -> PSL_LOWPSL. No functional change is expected.
2000-04-12 02:01:07 +00:00
ce0937324b
- Move a loop invariant of 'if (CPUISMIPS3)' out of pagemove().
...
- XXX I'm not sure whether the anticipatory MachTLBUpdate(to, pte) is
a gain or loss on runtime. If not a loss, it should be MIPS_TBIS().
2000-04-12 01:37:58 +00:00
85f3855a8c
- Implement mips3_TBIAP().
...
- Remove obsoluted routines in locore_mips3.S
- addiu -> addu, andi -> and, ori -> or.
2000-04-12 01:05:34 +00:00
1fdef1b204
deja vu: add "struct device *booted_device;" so raidframe links.
2000-04-12 00:47:10 +00:00
441ca96c28
sync with new mips trap.c
2000-04-11 17:57:42 +00:00
4ebaf4d105
Taken from Jeff Smith <jeffs@geocast.com>:
...
Fix regress/lib/libc/ieeefp/except for MIPS. Newer FPE handling code
did not generate SIGFPE, but always SIGILL. Add this back to the
assembly code. The QED 5231 requests the kernel emulates some of
the conditions that generate an SIGFPE, but when the emulation code
did a ctc1 to fsr with an exception the kernel got a FPE in kernel mode.
Fix this by saving the fp regs earlier, then saving the new FSR in
the context. This allows the FSR value to be seen by the SIGFPE
handler.
Add fp emulation for 8 mips2 fpu instructions to handle exceptions
(round.w.fmt, trunc.w.fmt, ceil.w.fmt, floor.w.fmt). This lets
perl5 run when compiled -mips2.
2000-04-11 16:28:05 +00:00
8bbdc89989
One more line escaped from trap.c rework.
2000-04-11 12:05:35 +00:00
741c324930
Finish previous.
2000-04-11 08:12:14 +00:00
7d08f8e623
Add dummies for barrier methods (copied from i386).
2000-04-11 07:12:47 +00:00
9b47c7431d
Now what are we doing with the return value of splx()? (probably a pasto)
2000-04-11 07:08:45 +00:00
21837796b8
Maintenace: add NetBSD tag and correct the name of the auther.
2000-04-11 06:57:59 +00:00
678a23b345
Forgot to remove mips_hardware_intr global variable.
2000-04-11 06:50:37 +00:00
156e51244a
Fix typo, DIAGNOSITC -> DIAGNOSTIC
2000-04-11 06:30:28 +00:00
45c43091fb
add a cast for clarity.
2000-04-11 05:26:27 +00:00
aa4f967e51
Abandon rather random distinctions in andi/addiu coding and make
...
them consistent with and/addu instrunction mnemonics which produce
exactly same binaries.
2000-04-11 04:53:57 +00:00
dba7b560cd
Load delay slot is automagically adjusted at runtime since MIPS II
...
architecture.
2000-04-11 04:39:14 +00:00
a6d33cc1f2
add a new function vn_marktext() for exec code to let others know
...
that the vnode is now being used as process text.
2000-04-11 04:37:47 +00:00
3dd5742b63
Change to have cpu_intr() peculiar to DECstations; have ssir global
...
variable and cpu_intr() body in machdep.c. Reorder and rename
model specific interrupt handler arguments. Fixup machine/intr.h and
machine/cpu.h appropriately.
2000-04-11 02:43:51 +00:00
8724ec3b5c
avoid declarating "i" as a local variable in a macro.
...
it's too easy to shadow another local.
2000-04-11 02:34:19 +00:00
43003128d4
tidy.
2000-04-11 02:30:32 +00:00
e342080364
Introduce cpu_intr() whose body is now provided by target ports in
...
their own ways. Ugly fixup #define in machine/intr.h have gone.
mips_hardware_intr global variable patch work has gone.
2000-04-11 02:30:14 +00:00
b937447204
actually add buf- and vnode-printing commands to the table.
2000-04-11 02:21:16 +00:00
4f3093c121
Remove various TLB manipulation routines which have been unused
...
long time, commented out and is unlikely useful; TLBWriteIndexed(),
TLBWriteRandom(), TLBFlush(), TLBFlushPID() and TLBFind().
2000-04-11 01:32:19 +00:00
b16a6100aa
comment out SOFTDEP
...
add upl, uvisor.
2000-04-10 17:44:06 +00:00
b2d31a5cc9
- fix a speeling error
...
- rename some numbered labels to be a bit less confusing.
- remove dead code
- fix a debug error message (argh!)
2000-04-10 16:28:56 +00:00
cb2b15a484
- UltraSPARC IIi does not have streaming buffers; don't try to find it's
...
diag regsiter to work out why the (non-existant) strbufs don't work.
- check for malloc failure in _all_ places.
- setup the PCI control register as recommended in the IIi users manual.
2000-04-10 16:11:23 +00:00
79f22c2c51
UltraSPARC IIi CPU has bits 6-10 of the INO hardwired to 1. when we
...
install an interrupt handler, make sure we set these bits to 1. now,
interrupt_vector in locore can find our registered interrupt handlers
and at least try to setup a call to them.
2000-04-10 16:07:50 +00:00
304778e6c2
- IRSR_BUSY is bit 5 not bit 4.
...
- IRSR_MID(x) is &'d with 0x1f (5 bits) not 0xf.
2000-04-10 16:05:13 +00:00
f7618dcb04
add 4 more bits for the PCI control register
2000-04-10 16:04:02 +00:00
6db43d2c0e
cosmetic (space before EOL), to ease diff against kame
2000-04-10 15:45:24 +00:00
cfadc0991a
Get a kernel without DDB to build.
2000-04-10 13:34:18 +00:00
53e7a8c8d5
- Fix a bug in mips1_TBIAP() misbehaving like as mips1_TBIA().
...
- Adjust comments to reflect what it does.
2000-04-10 11:38:16 +00:00
3d6b29f228
Use UVM_PGA_ZERO in uvm_pagealloc() calls instead of using pmap_zero_page().
2000-04-10 08:50:20 +00:00
f0f4d101b2
Add rl cardbus attachment.
2000-04-10 07:58:18 +00:00
1e921e0bd3
Regen.
2000-04-10 07:46:51 +00:00
e49807d100
Incorporate the changes of RL81x9 driver provided by M. Kanaoka
...
<kanaoka@ann.hi-ho.ne.jp>. He separated the driver into IC specific
portion and bus attachment portion and added cardbus attachent.
2000-04-10 07:42:55 +00:00
73fe3e3323
Add dependancy to wdc for ata.c, so that 'atapibus at umass' will compile
...
without wdc or pciide. Closes kern/9842 from Gary Duzan.
2000-04-10 06:43:38 +00:00
d37f3bd4ee
Use UVM_PGA_ZERO in pmap_alloc_ptp().
2000-04-10 06:34:11 +00:00
856c6ff149
Remove duplicate CTL_MACHDEP definitions (duplicated in <alpha/cpu.h>).
2000-04-10 06:04:28 +00:00
ea23dc6364
Make sure ASID management is done in the same way of NetBSD/alpha. Rename
...
and change 'pmap_alloc_asid()' into 'pmap_asid_alloc()'
2000-04-10 05:34:27 +00:00
c84ed44f75
Make (sure) ASID management same as what NetBSD/alpha does for ASN.
...
ASID#0 is reserved for pmap0 shared between proc0 and kthreads,
and every TLB for KSEG2 has G (global) bit to have wildcard match
regardless of the process' ASID. MIPS1 would flush TLBs belong
to user spaces upon ASID generation bump. Change for MIPS3 is
to be done.
2000-04-10 04:59:46 +00:00
9434b7b19e
Add fix for VS4000 SCSI hangs on disk writes. Add a VAX_BUS_DMA_SPILLPAGE
...
and use it in the asc_vsbus driver.
2000-04-10 03:49:56 +00:00
1c084aee4f
add ddb commands for printing vnodes and bufs.
2000-04-10 02:22:13 +00:00
66014d2dff
sparc -> __sparc__
...
print lock status in uvm_object_printit().
2000-04-10 02:21:26 +00:00
061ecbff46
tidy.
2000-04-10 02:20:06 +00:00
545ce9be22
remove unused macro.
2000-04-10 02:19:29 +00:00
9faf1824c8
in pool_put(), fill the entire object with PI_MAGIC instead of just the
...
first element.
2000-04-10 02:17:42 +00:00
8ad280f815
sparc -> __sparc__
...
sun3 -> __sun3__
2000-04-10 02:16:15 +00:00
e2b66b68da
Small white space and 80col wraparound cleanups.
2000-04-10 01:53:11 +00:00
b6e1cd056f
Make `whichqs' volatile so that C code can safely loop around it.
2000-04-10 01:48:56 +00:00
ef20427f07
sparc -> __sparc__
2000-04-10 01:22:44 +00:00
19de42337d
add rudimentary support for tracing stacks back into user space.
2000-04-10 01:22:09 +00:00
7e160e9e20
add newline at end of debug printf.
2000-04-10 01:21:06 +00:00
64bb56dcc8
add decls for fd driver.
2000-04-10 01:19:13 +00:00
eeb3a38cfc
Use UVM_PGA_ZERO in the promote-zero-fault case of uvm_fault().
2000-04-10 01:17:41 +00:00
a9f69b00d2
Use UVM_PGA_ZERO.
2000-04-10 00:48:35 +00:00
345b3d2136
Use UVM_PGA_ZERO in a few (easy) places.
2000-04-10 00:32:46 +00:00
2c48131727
Add UVM_PGA_ZERO which instructs uvm_pagealloc{,_strat}() to return a
...
zero'd, ! PG_CLEAN page, as if it were uvm_pagezero()'d.
2000-04-10 00:28:05 +00:00
e6baf1c570
Follow the unused convention.
2000-04-09 22:40:11 +00:00
8d2f5fd273
Fix TOY clock reading/writing on KA820.
2000-04-09 21:05:39 +00:00
b0789bc4f4
Add upl(4) driver. Uncomment uvisor(4) driver.
2000-04-09 18:34:02 +00:00
40b25953db
Add driver for Prolific PL2301/PL2302 host-to-host adapter.
2000-04-09 18:23:23 +00:00
d9c7f72cf3
Device driver for the DEC DEBNA/DEBNT/DEBNK ethernet device.
...
This is for sure the most overkill hardware I've ever seen! For example,
it needs the VAX page tables so that it can access all data structures
and mbufs in virtual memory! It will be a real challenge to make this
device work on mips and Alpha systems :-)
2000-04-09 16:49:57 +00:00
9b917327ac
Add insqti/remqhi macros. These macros are interlock queue instructions
...
used in multiprocessor systems as well as in uniprocessor environments
with intelligent I/O devices.
2000-04-09 16:37:09 +00:00
b6627b36a0
add rnd, IPV6 etc.
2000-04-09 14:14:50 +00:00
f83087efc5
Add pseudo device 'rnd' for /dev/random.
2000-04-09 08:28:00 +00:00
2c13222ffc
Delete needless #if.
2000-04-09 08:26:15 +00:00
5e32788ad7
regen
2000-04-09 06:49:16 +00:00
a20d930808
rename some unimplimented (because they are OLD in sunos) syscalls to avoid confusion.
2000-04-09 06:47:39 +00:00
93f27a1a74
Print the extra bits in the SS_ flags. Somehow lwp uses 0x6f00000b0. What is
...
0x6fxxxxxx. Inquiring minds would like to know :-) It does not appear to be
documented.
2000-04-09 06:28:28 +00:00
0884c7e58f
Disable previous; it makes things worse.
2000-04-09 05:48:07 +00:00
9813882e34
Add new sysconfig bits.
...
Fix the bogus numbering of the old bits.
2000-04-09 05:33:04 +00:00
a8d9661557
Try to do something more reasonable in the ASLWP case. Unfortunately
...
we don't support the semantics needed.
2000-04-09 05:30:17 +00:00
926a3cecf8
print the extra SA_ bits we don't support.
2000-04-09 05:29:28 +00:00
d1ea7c73a4
Try to emulate the svr4 setpsr trap. Needed by lwp.
2000-04-09 05:25:37 +00:00
e48983aa08
Add some IRIX constants.
2000-04-09 01:09:59 +00:00
b9156eec05
Add missing include of vm/vm.h
2000-04-09 00:18:12 +00:00
ea5325726d
Be a little more careful parsing boot parameters.
2000-04-09 00:13:54 +00:00
579f97d5c5
The interrupt line registers for the devices wired directly to the CPU
...
are not meaningfull. Instead match them by {bus,device,pin}.
2000-04-09 00:13:27 +00:00
43a7ae04c9
Disabling PCI Memory Read Multiple improves Tulip transmit performance 30%.
2000-04-09 00:11:51 +00:00
09ad839ab3
This file has been superseded by the MI ELF code.
2000-04-08 22:30:26 +00:00
12188e5241
A GENERIC-like configuration for the Netpliance i-opener.
2000-04-08 21:27:07 +00:00
8fb6cb9b81
Remove usused field.
2000-04-08 20:54:38 +00:00
2d88a5d886
Regen.
2000-04-08 20:35:13 +00:00
e75e18b138
Add another ISD IDE adapter.
2000-04-08 20:14:00 +00:00
87e3081158
Make this actually configure.
2000-04-08 18:16:42 +00:00
e2ed27832e
with these two, POWEROFSEVEN now compiles cleanly.
2000-04-08 15:15:41 +00:00
909b096cf8
Remove #ifdef __NetBSD__ code inside !__NetBSD__ part.
2000-04-08 13:49:43 +00:00
de19673726
Add vaddr_t cast to vtophys() arg. (for powerpc)
2000-04-08 13:44:12 +00:00
171d3a1576
don't use -Wuninitialized
2000-04-08 04:46:15 +00:00
d0be8351d9
add casts to stop gcc complaining
2000-04-08 04:45:41 +00:00
4583d39d24
correct the pci ino->ipl table. shut up gcc once more.
2000-04-08 04:35:01 +00:00
5b5f175f38
- store the ebus's parent so we can find the IOMMU
...
- use generic iommu routines in the ebus code (uses the above)
- add some more comments.
2000-04-08 04:33:09 +00:00
d360a37afd
- remove unused variable.
...
- include <sparc64/sparc64/cache.h> to get cache_flush() prototype.
- remove an unnecessary cast.
2000-04-08 04:17:31 +00:00
9964217571
Fix fms_free like auvia_free
2000-04-08 03:50:48 +00:00
a1ea15c0e1
Fix auvia_free, clean up more on close, and be more careful in interrupt
...
handler.
2000-04-08 03:33:58 +00:00
34d04ff6db
include <ddb/db_output.h> to get the db_printf() prototype.
2000-04-08 03:09:00 +00:00
748cfc6b99
rearrange a little to accommodate real SUNW,psycho support.
2000-04-08 03:08:20 +00:00
70e38e4034
actually, i wrote these in 2000
2000-04-08 03:07:07 +00:00
d65678850d
fix build of ucom. (static/non-static)
2000-04-08 01:22:26 +00:00
aa4c70110e
Move the start of the user stack down a little to account for the
...
virtual address checking done by the R8000 and some QED CPUs.
From Jeff Smith.
2000-04-07 21:50:08 +00:00
8e8e291c78
Prevent serial port from hanging when used as both console and terminal.
2000-04-07 19:47:18 +00:00
ef57f37442
Regen.
2000-04-07 19:00:17 +00:00
4ca1044eb8
Add Prolific host-host adapter.
...
I'll write a driver in a few days.
2000-04-07 18:59:58 +00:00
0ed7436590
Add a patchable variable `tlp_srom_debug' that enables dumping of
...
SROM output, etc.
2000-04-07 18:58:15 +00:00
69b1a83709
Restore sysbeep (accidentally removed in last commit).
2000-04-07 18:58:09 +00:00
4044b5a41c
Use separate callouts for motor-on and motor-off. Fixes a condition
...
where the floppy driver would wedge because a motor-on timeout would
be cancelled by another I/O operation cancelling a motor-off timeout.
From enami tsugutomo <enami@sm.sony.co.jp>.
2000-04-07 16:58:53 +00:00
6dd5a9db6e
Use dev/isa/fd.c.
2000-04-07 16:35:19 +00:00
91d6998394
Combine the Alpha, BeBox, and i386 ISA floppy drivers with a sledgehammer.
...
Not a perfect solution, but this is two less versions of this driver I
now have to modify.
2000-04-07 16:32:03 +00:00
2ca39ceddf
Make this compile again.
2000-04-07 14:35:58 +00:00
3b05a69aa2
Remove a couple of Static that shouldn't be there.
2000-04-07 12:40:16 +00:00
85bebee4a9
Use proper virtual address for some devices.
...
The transparent translation register is no longer required.
2000-04-07 12:09:30 +00:00
d75d6fb164
restore a brelvp() that I removed in a moment of overzealousness.
...
Debugged by: Brian Grayson <bgrayson@netbsd.org>
2000-04-07 08:27:28 +00:00
f1196b666f
change "ifdef sparc" to "ifdef __sparc__".
...
this fixes solaris shared libraries.
2000-04-07 07:02:11 +00:00
afc40c7421
comment out (erroneously?) added mcabus, until dev/mca exists
2000-04-06 23:55:04 +00:00
9355847b78
Fix typos in comments.
2000-04-06 23:44:20 +00:00
af0c0d535a
Fix a bug in HID Pop handling. From UCHIYAMA Yasushi.
2000-04-06 22:58:32 +00:00
cae6a3d2a4
Fix bogus byte-swap code in ncr_snooptest().
...
XXX This snoop test is not needed if ncr had real bus_dma(9) support...
2000-04-06 14:42:06 +00:00
7859835446
Add another #if NATAPIBUS > 0 in case there is no atapibus attached.
2000-04-06 13:52:04 +00:00
580ccd66ad
make this work with years-old new-style mdsetimage, etc.
2000-04-06 13:39:26 +00:00
cef3c93f82
Switch to MI ns_cksum.c - the MD ns_cksum.c is equivalent to it
...
(modulo some u_intX_t vs. u_char type usage). In particular, the
MD version didn't contain any MD code.
2000-04-06 13:37:49 +00:00
cf248f12dd
Add some, remove some.
2000-04-06 13:33:47 +00:00
966add799c
avoid some more compiler warnings, and fix a couple of errors.
2000-04-06 13:32:49 +00:00
a302716de4
Let the parent device of a ucom decide what size the read and write
...
buffers should be since it knows about the speed.
Increase the buffer size of uvisor.
XXX The uvisor is still pitifully slow. There must be a problem somewhere.
2000-04-06 13:32:28 +00:00
6b64191106
add some more casts to shut up gcc.
2000-04-06 12:49:00 +00:00
736ce53ae5
- #include "opt_ddb.h" to get correct Debugger() prototype.
...
- add some (u_long) casts to shut up GCC.
2000-04-06 12:17:26 +00:00
2809e2c3c4
cast to u_int64_t before shifting by 32 bits; avoids compiler warning.
2000-04-06 12:08:34 +00:00
7bc5a1ca36
Add CardBus interrupt enable flag. When this flag is asserted, a
...
CardBus interrupt is routed to the child devices and vice versa. This
flag is negated when a pccbb receives a suspend or stanby event.
2000-04-06 09:11:57 +00:00
1acb380bf7
Make it compile without USB_DEBUG. From Chris Jones.
2000-04-05 21:24:11 +00:00
bac9153774
Advance index into rasops_cmap for each color, not per triplet.
...
This makes highlighing and color possible on truecolor displays.
2000-04-05 20:33:28 +00:00
1edce49e66
Bug fixes for 68020only or 68030only machines, by Aymeric Vincent.
2000-04-05 19:38:33 +00:00
799abe9329
Quiet some printfs unless VERBOSE.
2000-04-05 18:39:09 +00:00
031d0221e7
Only spew about every interrupt that gets hooked up if DEBUG is defined
...
(i.e. not DIAGNOSTIC).
2000-04-05 17:49:55 +00:00
c4436b3c73
add some comments, clean this up a bit.
2000-04-05 14:30:44 +00:00
410a32c515
enable auxio at ebus.
2000-04-05 14:28:55 +00:00
21adbdd7d0
after enabling the streaming buffer, check to see that it is actually
...
there and enabled. if it appears to be missing or not enabled, do
not use it.
2000-04-05 14:26:51 +00:00
ff95126059
add a couple of comments.
2000-04-05 14:23:45 +00:00
b986c284fe
correct a message
2000-04-05 14:23:27 +00:00
cb71509569
be slightly more verbose when attaching ebus devices.
2000-04-05 12:30:42 +00:00
2a0b424186
LKM fixes:
...
* fix a typo in callout_stop() call
* prototype fd_mod_init(), fd_mod_free() to avoid warnings
* include iwm_mod.h
Fix sent in port-mac68k/9787 by Dave Huang.
2000-04-05 11:37:13 +00:00
1b535c32fc
Make this driver actually work.
...
(Noone did any testing for me, so I had to buy a Handspring Visor myself.)
2000-04-05 11:12:48 +00:00
8b5373dd2e
Use reference counting on the softc so detach doesn't blow it away prematurely.
2000-04-05 11:11:33 +00:00
8857b94a5c
winchip_cpu_setup(): restructure code to avoid warning when I586_CPU is not defined
2000-04-05 10:09:50 +00:00
add6dbf96c
clean this up some.
2000-04-05 08:03:03 +00:00
f4e31c4b14
attach auxio at ebus
2000-04-05 07:58:44 +00:00
9933bfdf9c
driver for the PCI/ebus AUXIO registers.
2000-04-05 07:52:48 +00:00
7bc4915fcd
Disable TSC on WinChip C6, add WinChip 2 & WinChip 3 entries.
...
From Kamo Hiroyasu <wd@ics.nara-wu.ac.jp> OpenBSD kern/991
via Takahiro Kambe <taca@sky.yamashina.kyoto.jp>.
2000-04-05 07:46:33 +00:00
3ca0215f69
Correct a pasto in pm_pmgrop_pm1(); while there were no negative side
...
effects, the place this code ended up couldn't have had any positive
effect, either.
2000-04-05 07:29:18 +00:00
15a3a17a43
Correct a few instances where we returned from a function that
...
had set splhigh() but returned without restoring the previous spl.
The PowerBook keyboard works better, now, but still starts to flake
out pretty badly at 70+ wpm.
2000-04-05 07:18:07 +00:00
952f1cf1d0
avoid using uninitalised variables inside WDCDEBUG.
2000-04-05 06:27:36 +00:00
508af4078f
- go through a list of kernels like other ports do.
...
- don't drop off the partition from the boot device, so that we
can boot from partitions that aren't the start of the disk...
2000-04-05 06:23:33 +00:00
66ca8568fe
minor cleanup.
2000-04-05 06:21:14 +00:00
f3468bd3d8
use DPRINTF() style debug messages; s/sbus/iommu/ in a few remaining places.
2000-04-05 05:59:03 +00:00
36b65b7d48
return if we can't map DMA buffers
2000-04-05 05:54:02 +00:00
07702f68a6
Introduce new filesystem type FS_CCD so that an operator can mark the
...
ccd component partition. Note that the ccd driver still allows partitions
of any types as components since an on-disk BSD disklabel isn't available
on some port.
2000-04-05 04:03:20 +00:00
fe2a55b12c
include opt_ddb.h. use generic iommu enter/remove/flush routines
2000-04-05 03:08:03 +00:00
ef18ba9083
include opt_ddb.h
2000-04-05 03:05:15 +00:00
7928eb6d98
add "hme at pci" support. also, add "nsphy at mii" and other mii stuff
2000-04-05 02:34:19 +00:00
710872c1d0
add "hme at pci" support.
2000-04-05 02:31:19 +00:00
99dbc425e9
Use copyin/copyout to get a colormap from/to user space.
...
Also, prepare for the case of a colormap maintained in kernel space.
2000-04-04 21:47:17 +00:00
2d78be17d1
Fix computation of ri_xorigin in RI_CENTER case; convery from bytes to
...
pixels, not from bytes to bytes^2/pixel.
2000-04-04 20:59:17 +00:00
36b5d25ca8
Make protocol message more accurate.
2000-04-04 20:16:47 +00:00
a94b555441
Put a ratecheck on error messages from the interrupt pipe.
2000-04-04 20:16:19 +00:00
5ecdfa3fc0
Rearrange the 21142/21143 SROM/CIS handling code to give it a chance
...
of working, and last-ditch default to MII-over-SIO with no reset routine
if we don't find an ISV SROM or quirk.
2000-04-04 19:33:21 +00:00
5a41b5bf56
- if_tlp_cardbus.c: Use the `pmreg' pointer passed by by
...
cardbus_get_capability() [mirror change already made to if_tlp_pci.c]
- if_tlp_cardbus.c: If we don't find an ISV SROM, try to grab the
Ethernet address from the CIS.
- if_tlp_cardbus.c: set CardBus cards to store-and-forward mode from
the get-go.
- Put the TxThresh tables in tulipvar.h, and use them in the CardBus
and PCI front-ends to go to store-and-forward mode.
- Document the Xircom X3201-3 clone a little more.
2000-04-04 19:22:50 +00:00
d11a9a62e2
Fix fallout from callout.
2000-04-04 17:20:54 +00:00
77f1e5eb02
Add checks to detect busy-waits, conditionnal on new debug flag
...
DEBUG_DELAY (0x40). This will print how much time we did loop in wdcwait(),
if we had to read registers more than one time.
2000-04-04 12:43:13 +00:00
fcb3e9ddac
Better fix to previous: delay(100) before the IDENTIFY, and if it fails
...
delay(1000000) and retry. The 1s delay is needed for some special case only,
no need to hang the machine for that long everytime (especially for PCMCIA).
2000-04-04 09:25:51 +00:00
c78399fc88
Add a new sysctl variable vfs.ffs.log_changeopt - if this is true,
...
an optimalization strategy change is logged into syslog. Default
is 0 (to not log). This replaces the recent not quite "right"
change to only log the change if kernel is compiled with DEBUG.
2000-04-04 09:23:20 +00:00
2deec9c018
add a comment regarding FATMIRROR bit usage and restructure the code
...
slighly to make the check more explicit
2000-04-03 18:12:12 +00:00
fdbfdd90f2
added two vaddr_t casts so that this compiles again with -DDEBUG
2000-04-03 15:07:07 +00:00
d3b06b0596
regen
2000-04-03 15:05:05 +00:00
0caed62b03
add some NVIDIA chipsets
2000-04-03 15:04:42 +00:00
358b947b7b
Correct a typo.
2000-04-03 13:40:05 +00:00
d063047593
Enable QIC157 command set. Untested.
2000-04-03 12:31:34 +00:00
dc3ce0b35e
Enable UFI protocol. Still untested in NetBSD. Used by, e.g., Y-E Data
...
floppies.
2000-04-03 12:12:38 +00:00
b9d50c36a7
Regen.
2000-04-03 12:10:04 +00:00
e0b4887adf
Add more vendors and devices. From FreeBSD and Nick Hibma.
2000-04-03 12:09:43 +00:00
b94d546033
Change #define CMSG_ALIGN so it's not recursive. Now the kernel compiles
...
again.
2000-04-03 11:49:25 +00:00
1c5551f260
splsoftnet() should block softclock() too.
2000-04-03 11:44:19 +00:00
c1acffff5c
When call a signal handler, don't pass the kernel (local) address in r5.
2000-04-03 10:23:24 +00:00
60a7a67f71
remove uvm_shareprot(). no longer needed since the demise of share maps.
2000-04-03 08:09:02 +00:00
03a4ef3a79
remove the "shareprot" pagerop. it's not needed anymore since
...
share maps are long gone.
2000-04-03 07:35:23 +00:00
9edec906b5
Removing trailing comma from enum declaration.
2000-04-03 05:58:31 +00:00
8bf945e9b3
push power button, send POWERCONTROL_LCD event.
2000-04-03 04:32:00 +00:00
0f3ba7133a
MCR-300, MC-CS LCD on/off port.
2000-04-03 04:31:05 +00:00
6442efb498
Make this file compiles under some condition:
...
- #if 0'ed out the umass_reset for now.
- some atapibus specific code is conditionalized by NATAPIBUS.
2000-04-03 03:56:49 +00:00
97ba34b80b
- Unselect the multicast outgoing interface if it is being detached.
...
- Drop the multicast membership if we are joining through the interface
being detached.
2000-04-03 03:51:16 +00:00
107aabc200
Bump the reference count of ifaddr while it is refered through in_multi.
2000-04-03 03:50:05 +00:00
126ead3471
add some events.
2000-04-03 03:48:42 +00:00
c1f0f12753
- hpcmips_verbose
...
- pbsdboot -v option
- WIN I/O setting
- vrisa IRQ GPIO mapping
- memory banks.
2000-04-03 03:39:58 +00:00
c560e9a77b
When killing pending xfers on device detach, we can't expect scsipi_done
...
to remove all xfers from the pending queue. It removes only xfers for
asynchronous transactions. So, simply loop over all pending xfers
with calling scsipi_done and wait xfers to drain. Addresses PR#9703.
2000-04-03 03:37:33 +00:00
7782859d5b
mips_hardware_intr is defined in <mips/intr.h>
2000-04-03 03:37:25 +00:00
1e2f627e0b
- virtual TEXT vram implimentation.
...
- optimize scroll.
- hardware accelerator hooking mechanism (initianly, maybe change..)
- multiscreen (some bugs, so currently disabled)
- if you want disable above codes, #define HPCFB_DISABLE.
2000-04-03 03:35:37 +00:00
07f0b2299b
hide CMSG_ALIGN() from the userland, it is not part of RFC2292/Posix.1g.
2000-04-03 02:06:11 +00:00
1f0de7e7d2
actually put a _comment_ before the second read of the ident register
...
that Charles added in rev 1.58. Not only is it good programming practice
to explain magic, but code that looks like:
reg = pcic_read(h, PCIC_IDENT);
reg = pcic_read(h, PCIC_IDENT);
is _gonna_ be interpreted as a cut-n-paste error by someone eventually.
2000-04-03 01:55:25 +00:00
156114a02f
Use the new cpu_amask variable rather than calling alpha_implver() and
...
alpha_amask() ourselves.
2000-04-03 01:48:07 +00:00
55287d7159
Print any architecture extensions present on the primary CPU.
2000-04-03 01:47:28 +00:00
ae8fb348b3
Fold long line.
2000-04-03 01:40:51 +00:00
dbcb4cee48
Fix a typo in a previous revision, and add bit names for amask bits for
...
use with bitmask_snprintf().
2000-04-03 01:10:17 +00:00
cfeee7a4ef
Enable de, since tlp doesn't support one of my cards.
2000-04-03 01:04:36 +00:00
076e3ffa1c
Update.
2000-04-03 00:20:11 +00:00
9a31a8c77f
Add atapibus* at umass?
2000-04-03 00:03:28 +00:00
e126f0d1b3
New and shiny version of the umass driver. This is a port of the new
...
FreeBSD umass driver by Nick Hibma <n_hibma@freebsd.org> and
MAEKAWA Masahide <bishop@rr.iij4u.or.jp>.
Improvements:
uses asynchronous USB requests
supports more transport protocols (Bulk-only and CBI)
supports more command sets (SCSI and ATAPI)
Tested with Zip100 and Imation Superdisk.
2000-04-02 23:46:53 +00:00
60057aca5c
Allow atapibus to be attached to umass.
2000-04-02 23:40:41 +00:00
b6cee95eb7
Let the device thet gets an atapibus attached specify how to kill pending
...
transfers by giving a function pointer.
The old method always called wdc specific code.
2000-04-02 23:38:19 +00:00
b1c28384dc
If the SROM size is to far out of range, issue a diagnostic and set the size
...
to 1Kb. Some boards (e.g. my SMC9332) have a broken MicroWire interface.
2000-04-02 23:38:05 +00:00
0a425e1f3d
Generate an error message if starting a transfer fails.
2000-04-02 21:25:41 +00:00
2bc5adb20e
Instead of checking vm_physmem[<physseg>].pgs to determine if
...
uvm_page_init() has completed, add a boolean uvm.page_init_done,
and test against that. Use this same boolean (rather than
pmap_initialized) in pmap_growkernel() to determine if we are
being called via uvm_page_init() to grow the kernel address space.
This fixes a problem on some i386 configurations where pmap_init()
itself was needing to have the kernel page table grown, and since
pmap_initialized was not yet set to TRUE, pmap_growkernel() was
choosing the wrong code path.
Fix tested by Havard Eidnes.
2000-04-02 20:39:14 +00:00
d8be1024c1
Make this compile again after the callout changes.
2000-04-02 19:54:29 +00:00
8aeb8df354
Add a flag to tell whether a MAC address was actually found in the CIS.
...
XXX This whole piece of code should go away ASAP. We should use a callback
as in the PCMCIA code. In fact, we should use the PCMCIA code...
2000-04-02 19:11:37 +00:00
dc680eb373
Slight correction to last: really only do it if it's a 21142 or 21143.
2000-04-02 19:02:34 +00:00
f5b5bbbf21
Add code to read and write bt463-style ramdacs; pick ramdac interface
...
functions based on type returned from tga_getconf().
Adapt to change in ramdac interface.
Fix race condition in tga_sched_update().
Make tga_sched_update() work before interrupts are enabled.
2000-04-02 19:01:11 +00:00
bc3260fcb0
Restore ramdac-type field to TGA configuration structure.
2000-04-02 18:59:32 +00:00
c0a4c9e67d
Move bt463 code to dev/ic and adapt to the new ramdac interface.
...
Set default window type to 24-bit truecolor.
Correctly set pseudocolor mode.
2000-04-02 18:57:36 +00:00
c66f54d73d
Adapt to change in ramdac interface.
2000-04-02 18:55:01 +00:00
2b4ac6a7b9
Add ramdac_register() to interface structure.
2000-04-02 18:54:33 +00:00
e70fd4b33c
During the socket probe, read the ident register twice.
...
I don't understand why, but sometimes the clone chips in hpcmips boxes read
all-0s the first time.
2000-04-02 18:29:14 +00:00
7246364f07
With SCSIVERBOSE, only print sense data if there actually is a problem.
2000-04-02 17:58:17 +00:00
7797648425
Change the initial field in struct ata_atapi_attach and struct scsipi_link
...
slightly to allow scsibus and atapibus to attach to the same device.
Furthermore, only attach a scsibus when the bus type is BUS_SCSI.
2000-04-02 17:25:52 +00:00
229fcf5bbe
When using MII on 2114[23] chips, zero the SIA TXRX register to disable the
...
internal Nway engine. This fixed a major performance problem.
Thanks to Matt Thomas for pointing this out.
2000-04-02 17:23:33 +00:00
78b105698a
Move dl* function definitions to libc on ELF.
...
Based on the patch supplied by Takuya Shiozaki <tshiozak@astec.co.jp>.
See http://mail-index.netbsd.org/tech-userlevel/2000/02/23/0000.html .
2000-04-02 15:35:47 +00:00
b18b370715
Make sure color rgb:0/0/0 is black.
2000-04-02 12:53:05 +00:00
7df13bfec7
Enable wdc1 (needed on StarMax).
2000-04-02 12:36:38 +00:00
joda