a5ace63ee2
Associate the preamp with the mic volume in the input class.
1998-08-12 19:09:55 +00:00
916c60de3e
Oops; fix typos.
1998-08-12 18:55:03 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
a2f1d5b822
Add a knob to enable/disable the mic preamp.
1998-08-12 18:47:43 +00:00
fa39959a5e
Add a MIDI driver for the PC speaker. This is mostly of hack value,
...
but, hey, lotsa people got a MIDI device now! (A truly pitiful one. :-)
1998-08-12 18:16:36 +00:00
881b4053a6
Remove some white space.
1998-08-12 18:15:04 +00:00
50ab480a8c
Add a layer to handle emulation of MIDI for synthesizers.
...
It handles decoding of MIDI commands, voice allocation, and translation
it notes to frequencies.
1998-08-12 18:14:01 +00:00
27c5df27d1
Tidy up and rename some functions in the MIDI driver.
1998-08-12 18:11:53 +00:00
5bec554354
Driver for the 3Com internal PHY, found on 3c905B-TX cards (and maybe
...
some 3c905-TX?). Partially from Frank van der Linden.
1998-08-12 08:46:20 +00:00
53907fe5a1
Support Cabletron Ethernet card, from John Marohn in PR 5762.
1998-08-12 07:19:09 +00:00
3979b06d00
enhanced -> preamp
1998-08-12 03:18:34 +00:00
5ad5bb35af
minor change to make the message less linux like
1998-08-12 00:03:23 +00:00
1f5c14d8ef
ess_audio_channel:active is now used even when DIAGNOSTICS is not defined.
1998-08-11 12:16:22 +00:00
a6e73a5576
Actually set all the logical filter bits. Doh!
1998-08-11 05:57:40 +00:00
396881cc5d
Eliminate a potential (but not common) NULL dereference.
1998-08-11 05:47:43 +00:00
271d3df6f3
Fix an obvious bug that caused the multicast filter to always be all 0s.
1998-08-11 04:18:25 +00:00
9b46e98b21
Adapt to attribute name change. Also, deal with 3Com PHYs that report
...
0/0 as their oui/model IDs.
1998-08-11 00:41:44 +00:00
7b8168e675
Adapt to new MII code.
1998-08-11 00:12:52 +00:00
d812ed6db7
G/c the 83840 register definitions.
1998-08-11 00:12:20 +00:00
1301693108
Adapt to new MII code.
1998-08-11 00:11:39 +00:00
b1fb3ecb0f
Adapt to the new MII code. This required splitting some structures into
...
if_tlvar.h, since the ThunderLAN PHY driver needs to know some things
about it's parent (and since it can only attach to a ThunderLAN chip,
this is the easiest way).
1998-08-11 00:09:26 +00:00
36db6106a8
Adapt "tl" driver to the new MII code, and add the "mii" attribute to
...
the "fxp" driver.
1998-08-11 00:08:23 +00:00
f0d19c2ee1
Change the name of the attribute to "mii".
1998-08-11 00:05:36 +00:00
e7643533b6
Adapt to MII layer changes.
1998-08-11 00:03:12 +00:00
e8e237ffc6
Device driver for the Quality Semiconductor QS6612 PHY, found in
...
SMC EtherPower-II cards.
1998-08-11 00:01:03 +00:00
6bae1a0bea
Device driver for the Intel i82555 PHY.
1998-08-11 00:00:28 +00:00
045a100420
Adapt to the new MII layer. This PHY driver now properly supports
...
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.
XXX There is still some work to do wrt. autonegotiation and the
BNC/AUI support in the ThunderLAN PHY.
1998-08-10 23:59:58 +00:00
f66f3b1ba9
Adapt to the new MII layer. This PHY driver now properly supports
...
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.
1998-08-10 23:58:39 +00:00
ad00a98756
Initial generation.
1998-08-10 23:56:19 +00:00
3f8be46d4d
Near complete rewrite of the MII layer to present an interface compatible
...
with BSDI's MII layer to device drivers.
1998-08-10 23:55:16 +00:00
8ba8e2056b
Remove unused field (sc_ih) in ess_softc (interrupt handlers are kept
...
in a per-direction structure).
1998-08-10 20:24:26 +00:00
b034eb97bf
Fix typo.
1998-08-10 20:02:48 +00:00
345530343a
Responding to an issue brought to my attention- when the device is
...
opened norewind and 2 filemarks are written at the end a phantom file
is left (just what I was afraid of, but I didn't think about it in
the last delta because somehow I had managed to convince myself that
this was a nonissue. It's not.).
So- in stdone clear ST_WRITTEN for regular reads. In st_close, preserve
the state of ST_WRITTEN, and if no error and 2FM@EOD for this device and
this is a no-rewind open, backspace one filemark. This should preserve
(for this mount session) FILE - FMK - FILE - FMK - FILE ... FILE FMK FMK EOD
sequencing.
This doesn't clean up the case of EOM appends- in this case you *will* still
get (after an MTEOM operation and a write of a file) a phantom empty file,
e.g. FILE - FMK FMK - FILE - FMK FMK EOD *unless* you follow the EOM operation
with an explicit backspace. The trouble is that this makes it difficult for
seamless interchange with other systems which don't necessarily follow.
The preferrable alternative would be to eliminate the 2FM@EOD except for
1/2" Reel tapes, but that has been pretty much nixed within developers.
1998-08-10 16:56:25 +00:00
7fca135b1b
Use the new trigger interface.
1998-08-10 15:32:18 +00:00
2ff84b0fe4
Kickoff xmit interrupts, needed on chip DC7201.
1998-08-10 14:41:16 +00:00
920e7c7d5d
Fix a race involving determination of pollmode. This is not known to be
...
associated with any observed lossage...it was just noticed while reading
ncr_start().
g/c some now-unreachable code produced by the earlier race condition fix.
1998-08-10 13:10:33 +00:00
060f81eb62
Minor change.
1998-08-10 02:19:18 +00:00
93703857ca
Slow down, Wilbur.
1998-08-10 02:13:44 +00:00
7514d511f7
Fix a typo I introduced in the MIDI code.
1998-08-10 02:12:30 +00:00
1c6dea16fa
For consistency, only do the rate coupling in full-duplex mode.
1998-08-10 01:27:34 +00:00
8d77cae1b4
For models prior to the SB16, there is only one clock divider, so couple the
...
sample rates. However, only do this if both play and record are being used
simultaneously; otherwise we can't play 22KHz on the SB1.
1998-08-10 01:25:33 +00:00
20ec08b84e
Oops.
1998-08-10 01:17:33 +00:00
10148394d2
Call set_params if usemode changes.
1998-08-10 01:13:20 +00:00
3dcff6581b
Use the new trigger_{in,out}put interface.
...
Also, even on the SB1, we can leave the DMA controller in auto-initalize
mode and just send a command to the board for each block. This may help
prevent FIFO underruns.
1998-08-10 00:20:39 +00:00
cf7abcbe64
Minor cleanup to debugging cruft.
1998-08-09 22:11:48 +00:00
592b1dd587
But seriously...
1998-08-09 21:41:45 +00:00
a85ed63924
Oops; the previous was wrong on little-endian machines.
1998-08-09 21:35:03 +00:00
4ffebebb25
Several things:
...
* Use the new trigger_{in,out}put interface.
* Allow the play and record channels to have different encodings (but the
same sample rate).
* Play u-law and a-law as 16-bit data. (This may not work yet...)
1998-08-09 20:32:34 +00:00
17431823fb
Add trigger_output and trigger_input entry points, which replace
...
init_{in,out}put and start_{in,out}put, and are only called once.
1998-08-09 20:28:07 +00:00
8cbcfa0df2
Add mulaw_to_slinear16 and alaw_to_slinear16.
1998-08-09 19:22:15 +00:00
b1bb9aa490
Oops. We do still need to set t_dev in the first open part of zsopen,
...
so we get ttyXX vs cuaXX right. Leave the initialization in attach.
1998-08-09 18:36:45 +00:00
a2fc689833
Make sure output is thoroughly halted on close, and remember that we stopped
...
it.
1998-08-09 07:25:58 +00:00
b4e0bf5dfb
Use 4- and 8-byte DMA transfers.
1998-08-09 06:52:57 +00:00
0611fc34f8
Don't actually touch the hardware in set_params; defer that until we actually
...
start a transfer. Instead, just check that the parameters are valid.
Also, use 16-bit output for u-law and a-law.
1998-08-09 06:38:30 +00:00
26e55969e4
Initialize the struct tty's t_dev field at attach rather than first open.
...
The attach routine calls zsparam if we're setting up the console, and
zsparam needs this field to tell which zstty to set up. Otherwise, we
set up zstty0 even if it's not the console!
1998-08-09 06:17:07 +00:00
9bedf069cd
Mask off extra usemode bits.
1998-08-09 05:44:51 +00:00
5eba82397c
Oops; fix typo.
1998-08-09 04:59:55 +00:00
017b9af5fe
Clarify with a specific reference to the manual page in question.
1998-08-09 04:58:08 +00:00
b3853549b3
Always copy back both the record and play parameters, in case the driver had
...
to change one behind our back.
1998-08-09 04:54:44 +00:00
12f5a41e1f
Make the previous slightly more robust, and set AUDIO_PROP_INDEPENDENT.
1998-08-09 04:40:55 +00:00
c8532af3b2
Make sure the sample rate is the same on both channels, tracking the change
...
from one channel to the other if only one is active.
1998-08-09 04:14:47 +00:00
759ca5ee0c
The manual says to use the other crystal for 22050Hz.
1998-08-09 03:48:42 +00:00
565adbaffb
Set the FIFO control bits correctly so that stereo recording works.
1998-08-09 02:54:50 +00:00
80457a2c65
Use auto-initialize DMA for recording.
1998-08-09 02:05:52 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
7795559d04
Use splaudio on the arm32 port.
1998-08-08 23:40:03 +00:00
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
94e9a8651a
Forgotten to commit this in last change.
1998-08-08 11:00:33 +00:00
815f9f2445
1. Untangle preprocessor conditionals for sanity and {} balance
...
2. Fix a race between the first callout and the first non-polled ncr_start()
1998-08-08 00:14:08 +00:00
49637cda8d
use an md keyboard beep replacement function on alpha too
1998-08-07 10:28:36 +00:00
9bb616c621
Regen.
1998-08-07 06:59:31 +00:00
88c6239026
Add product IDs for the 3Com Cyclone-based PCI Ethernet devices,
...
the 3c90xB DMA-only cards.
1998-08-07 06:58:57 +00:00
558733ffc6
Track our carrier status and report it in the media status callback.
1998-08-07 05:55:14 +00:00
202c97c54d
Add an isapnp frontend for the ess driver. It somewhat works
...
(sounds is made but one buffer is played continuously).
1998-08-07 00:53:23 +00:00
7b044dea51
Make the irq checking logic somewhat less bogus.
1998-08-07 00:51:06 +00:00
51bb504a6e
Report a sensible MIDI device name.
1998-08-07 00:28:20 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
02c9ad1755
And fix pastos.
1998-08-06 12:26:51 +00:00
a79bb0d7ae
Fix tyop.
1998-08-06 12:23:39 +00:00
e2a2525203
fix incorrect length of LOCATE CDB (reported in PR kern/5306 by
...
Dave Huang <khym@bga.com>)
1998-08-06 10:20:38 +00:00
0c6791d804
Add macro to test iobase validity.
1998-08-05 16:40:22 +00:00
28e2d6024a
Clarify a comment.
1998-08-05 16:38:09 +00:00
32fce55082
Improve generation of default disklabels:
...
-store printable product ID in cd's and sd's softc, use it as "typename"
-for this, add a "destination buffer length" argument to scsipi_strvis()
-return ATAPI device type for ATAPI devices
1998-08-05 16:29:04 +00:00
a0aeff98c4
Fix two pastos.
1998-08-05 10:16:25 +00:00
f76fb48283
Use looping DMA for play channel.
...
More cleanup.
1998-08-04 13:14:42 +00:00
5b057ab09f
Allow option AUDIO_INTR_TIME even if the platform does not support
...
FP in the kernel.
1998-08-04 11:26:14 +00:00
ac2b25e392
Improve some error messages.
...
Make some preparations for isochronous transfers.
1998-08-02 22:30:52 +00:00
607075abc6
Use wskbd enable function.
1998-08-02 22:27:01 +00:00
0dc548ce7d
Adapt to wskbd interface changes; add dummy enable/disable function.
1998-08-02 14:22:25 +00:00
86b0985e69
Adapt to wskbd interface changes; implement enable/disable function.
...
Disable the keyboard on attach if not console.
1998-08-02 14:21:02 +00:00
4ee71fe4f4
Split the wskbd_attach arguments into console and autoconfiguration parts
...
(again); put some constant data into shared structures. This makes it
more look like the mouse part, and it helps USB integration.
Implement wskbd_enable() to enable/disable the keyboard.
1998-08-02 14:18:07 +00:00
eba74b9369
Abort interrupt pipe on disconnect.
1998-08-01 20:52:45 +00:00
6aff95b06c
Make sure to abort the interrupt pipe on disconnect of a mouse or keyboard.
...
Improve some error messages.
1998-08-01 20:11:38 +00:00
f654e0188e
Switch from a global flag to tell if the host controller should use
...
polling to a local one for each controller.
1998-08-01 18:16:19 +00:00
5a1f4dd6bc
Complete the scancode conversion table.
...
Tell the keyboard not to send idle reports.
1998-08-01 17:46:22 +00:00
ce69d417a2
Make it compile without DIAGNOSTIC
1998-07-31 23:54:09 +00:00
6e34b79e01
Suggestion from Matthias Drochner: If at close you decide to write
...
filemark 'coz you opened write only and didn't do anything else,
call st_check_eod to possibly write TWO furshlugginer filemarks.
Also- return any errors from writing filemarks out of stclose.
1998-07-31 17:25:55 +00:00
6b407a79c6
Major cleanup of the ESS driver. It now sorta works. More to come.
1998-07-31 15:17:17 +00:00
53878c1925
Change one word to be consistent w/ a previous message.
1998-07-31 05:37:02 +00:00
99d64ae1ca
Oops, unused variable.
1998-07-31 05:29:48 +00:00
4ea9132164
Rearrange isapnp_callback() slightly.
1998-07-31 05:28:24 +00:00
c489673819
Ensure we're probed only once per ISA bus.
1998-07-31 05:26:15 +00:00
06761b1ed4
Merge in a register definition mentioned only in passing in one place in
...
the Zilog docs.
1998-07-31 05:08:38 +00:00
6ec566abd2
Add BeBox support.
1998-07-31 04:56:55 +00:00
c46ad7a0cc
Add NetBSD/arm32 support.
1998-07-31 04:50:54 +00:00
171cebde9c
Actually add support for the Atari.
1998-07-31 04:45:01 +00:00
75db93cec2
Pull in files.isapnp here; the two busses are linked together quite closely
...
(more than we'd like maybe, but don't we wish ISA didn't suck...)
1998-07-31 04:40:39 +00:00
54de49fcb9
Add support for NetBSD/alpha.
1998-07-31 04:35:22 +00:00
f40a42d5c4
Use config_defer() to scan for ISA PnP cards.
1998-07-31 04:00:35 +00:00
b90b2a3798
Several more changes. First of all, move CTRL_MODE to have I/O behaviour
...
like a no-rewind device. Secondly figure out whether the initial TUR
for a CTRL_MODE open resulted in a tape being actually found (if so,
then do a mount session).
Move the 'sun compatibility' behaviour into stdone && stclose- don't
mark a tape as having been written in stopenm, fer gosh sakes.
1998-07-31 04:00:22 +00:00
03ffe0a516
Use the pool allocator for scsipi_xfer structures.
1998-07-31 03:00:51 +00:00
6056af462f
Use the pool allocator for vndxfer and vndbuf structures.
1998-07-31 02:24:26 +00:00
dcfe0e1506
Back out part of previous; it is perfectly reasonable, and desirable, to
...
print out debugging info ifdef DEBUG.
1998-07-31 02:14:40 +00:00
bec14b0ce3
Part A (Cosmetic nonsense):
...
>We're not Linux. If we still want driver version strings to be displayed
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
Part B:
Field interrupts in OS layer so that (in this OS) bus_dmamap_sync(POSTREAD)
can (formally) ensure that the result queue is stable wrt to buffering
and that for sending a command a bus_dmamap_sync(PREWRITE) is done to
ensure that the device gets a good view of what the mailbox contents
should be.
1998-07-31 02:08:16 +00:00
4356136193
Use the pool allocator for component buffer headers.
1998-07-31 01:23:56 +00:00
11c3d96b49
Flush spurious #endif after ADDMULTI
1998-07-31 01:10:13 +00:00
3cd681ef27
Typo.
1998-07-31 00:42:31 +00:00
34529b444b
From cd.c: call disk_unbusy() if we are unable to enqueue our command.
1998-07-30 23:57:07 +00:00
6026f141fd
Enable bus_dmamem_alloc/bus_dmamem_map
1998-07-30 22:44:51 +00:00
bf52ef5697
Squash unused variable.
1998-07-30 22:17:34 +00:00
ae2fb64e3a
Document supported boards near the top of the driver source code.
1998-07-30 21:28:15 +00:00
4f8d24662e
Uncomment the SoundBlaster ofisa attachment; the Shark isn't the only
...
potenial user of ofisa (e.g. my FirePower). An ofisa attachment for the
SoundBlaster is prefectly legitimate.
1998-07-30 21:25:05 +00:00
0bd4f9291c
Use the correct "compatible" strings (ESS, not generic SB!), and correct
...
some comments about what we expect as far as interrupt and dma properties.
1998-07-30 21:22:59 +00:00
16ad73c288
Add the Simple Technology Communicator 28.8.
1998-07-30 20:47:11 +00:00
b25d4941cd
Regen.
1998-07-30 20:45:35 +00:00
965404c104
Add Simple Technology vendor ID, and Simple Technology Communcator 28.8
...
product ID.
1998-07-30 20:44:25 +00:00
b7a585b61d
Use the previously committed pnp hook.
1998-07-30 18:03:34 +00:00
c1303944f7
Add a hook that resets the bios configuration from the pnp devices
...
thus making them invisible to isa probes [from OpenBSD]
1998-07-30 18:02:50 +00:00
dd49f248a4
Protect against multiple inclusions.
1998-07-30 18:01:44 +00:00
8bd9c69e11
Multicast support.
1998-07-30 16:40:19 +00:00
c0ca4781ed
ESS attachments for ofisa.
1998-07-30 14:15:59 +00:00
cdeb158d5f
A first stab at making the SHARK sound work. It doesn't really work
...
yet, but it probes and makes a noise when used. Stay tuned!
1998-07-30 14:11:42 +00:00
326ffe6cd3
regen
1998-07-30 09:47:49 +00:00
085f3ce0cc
add entry for Boca 56k (from Fujie Zhang <fzhang@NMSU.Edu>)
...
update comment for OPL3-SA2 / OPL3-SA3 (same PnP ID)
1998-07-30 09:45:16 +00:00
e404c0efec
Some minor comment tweaking.
...
Also- to be fair and on review, kern/391 isn't really addressed by
the previous commits. In reviewing, I'm embarassed to find that this
talks about reading at EOT. I'm actually going to claim that this
is 'not a bug' or 'fixed already' in that at the end of media (at the
edge of recorded media), you may continuously open the tape (should
you choose to) issue a read, and zero bytes will transfer- this is a
sufficient EOF indicator.
1998-07-30 04:11:43 +00:00
c45a129a99
Clarify and name some of the 'open' modes. Clarify a few comments. Remove
...
a now unused variable. Also, remove the restriction against at density
code being greater than the max SCSI 2 density code: 0x80..0xff are the
Vendor Unique codes and most certainly should be allowed. The check for
invalid values should be less than 0 or greater than 255.
Oh- yeah, the previous commit addressed kern/391.
1998-07-30 03:17:22 +00:00
7692effeed
Make some changes wrt EOM behaviour. Distinguish EIO_PENDING from
...
EOM_PENDING. Set up a persistent EARLYWARNING behaviour flag. If
set, EOM behaviour forces a 'short read' to signal logical (as
opposed to physical) end of media. The user application may, of
course, do with this information what it will.
The EARLYWARNING behaviour may be enabled/disabled by a MTIOCTOP
operation. The default action is to not have EARLYWARNING enabled-
but this may be reversed by an option ST_ENABLE_EARLYWARN in
the kernel build.
1998-07-30 00:55:20 +00:00
4205ca3d2a
opt_scsiverbose.h now is opt_scsi.h and contains the defopted
...
SCSIVERBOSE and the new ST_ENABLE_EARLYWARN.
1998-07-30 00:49:19 +00:00
d40e353fa6
Add NOLUNS quirk for the UMAX Astra 1220 scanner.
1998-07-30 00:00:06 +00:00
a0803787f7
Add functions to execute asynchronous requests and use these from
...
interrupt context.
[I had some feline debugging help here. I noticed that every time Kem,
our kitty, jumped onto the USB keyboard the machine crashed.]
1998-07-29 20:50:11 +00:00
f453d02883
Make sure to report wheel movements.
1998-07-29 20:44:32 +00:00
4f2fd378bb
Use sbus_destroy_attach_args().
1998-07-29 18:33:27 +00:00
1d8ad313ab
`struct rom_range' => `struct sbus_range'
1998-07-29 18:32:54 +00:00
9a7ffd5724
Move some Sbus structures in here.
...
* attach arguments now directly support multiple register and
interrupt sets.
* address translation (`ranges') has been made bus-specific
* introduce sbus_destroy_attach_arg() to clean up after
attaching an an Sbus device.
1998-07-29 18:30:20 +00:00
d6a8a4f025
Don't print chip name in attach, the ad1848 attach already does.
1998-07-29 11:39:25 +00:00
0733d4c87f
Do locator related defines using defines from locators.h rather
...
than literal constants.
1998-07-28 22:01:24 +00:00
99b10d9e98
Regen.
1998-07-28 21:51:34 +00:00
463fc03c76
Add the IMS TwinTurbo 128M graphics board.
1998-07-28 21:50:30 +00:00
ae97a4cbf5
Support for USB mice with Z axis or wheel.
1998-07-28 21:21:47 +00:00
20f454ae1c
KNFify.
1998-07-28 20:58:39 +00:00
0a5abbe31d
Reset the mouse in attach(); Bog knows what other drivers did to it
...
in their probe()s.
Clean up some "pms" vs. "psm" naming confusion.
1998-07-28 20:18:36 +00:00
0d257affa0
Add some constants.
1998-07-28 16:03:49 +00:00
a374ab61d8
ic/i82595reg.h
1998-07-28 16:02:34 +00:00
4fb93c48ec
Remove dead code.
1998-07-28 14:44:46 +00:00
4e690f3740
Improve chances of success and make it compile again.
1998-07-28 14:16:29 +00:00
4129139031
Supported medium is IFM_10_5
1998-07-28 12:22:37 +00:00
daed8d7ce1
Fix obsolete code in waiting for calibration on the ad1848.
...
(Sigh, the ad1848 driver should be rewritten.)
1998-07-28 12:13:34 +00:00
b068e817d9
Add missing .include <bsd.kinc.mk>
1998-07-28 08:45:46 +00:00
2c49105697
Fix #includes.
...
Remove #ifdef SUN4C & SUN4M.
1998-07-28 00:44:39 +00:00
5bf04ed2be
Add `sbus' to SUBDIRS.
1998-07-28 00:36:31 +00:00
783e554213
One header to install.
1998-07-28 00:33:03 +00:00
315e1a28de
Fix #includes
1998-07-28 00:31:42 +00:00
fd9017990f
Magma driver has been moved to <dev/sbus>
1998-07-28 00:17:47 +00:00
48ca0ed59d
Lance front-ends on Sbus moved here.
1998-07-27 23:56:26 +00:00
947f2424a8
Add `le at sbus', `le at lebuffer' and `en at sbus'.
1998-07-27 23:54:58 +00:00
fa624fd99a
Moved to dev/sbus from arch/sparc/dev
...
Get headers from <dev/sbus>
1998-07-27 23:47:07 +00:00
a79f26fe76
Regen from pcidevs.
1998-07-27 22:58:43 +00:00
04affecc7a
"Brooktree Brooktree Bt848" -> "Brooktree Bt848"
1998-07-27 22:58:07 +00:00
ee4bf8991d
add support for native "Intelli" mice (wheel = z axis)
1998-07-27 22:36:23 +00:00
1b27072062
add zero z axis argument
1998-07-27 22:34:30 +00:00
87ad9bca7a
add third axis for pointing devices (flying mice)
1998-07-27 22:33:22 +00:00
0d386417e9
Regen from pcidevs.
1998-07-27 21:37:17 +00:00
d54ccbde1a
Add Brooktree Bt848 and BT849 video capture chips.
1998-07-27 21:34:11 +00:00
e8e8a975af
Regen.
1998-07-27 20:04:10 +00:00
6585f9ebc1
Add S3 SonicVibes.
1998-07-27 20:02:27 +00:00
81ff4e8b36
qec device register definitions (from OpenBSD).
1998-07-27 19:27:19 +00:00
3252d462bb
qec `bus' driver; much like lebuffer.
1998-07-27 19:26:32 +00:00
08a95cc833
Change copyright.
1998-07-27 19:25:34 +00:00
e68ada23e2
Move "sbusvar.h" hack in here.
...
Also define SBUS_BURST_* values here.
1998-07-27 19:15:40 +00:00
3299f8cfe4
Get headers from dev/sbus.
1998-07-27 19:13:45 +00:00
b1fe2da904
get headers from dev/sbus
1998-07-27 19:13:06 +00:00
444f71921e
sbus configuration file.
1998-07-27 19:04:14 +00:00
47f172660c
Make ums attach to wsmouse only.
1998-07-27 18:51:32 +00:00
e3eed5f706
Fix cfattach naming botch.
1998-07-27 18:27:36 +00:00
1e737a4010
add definition for pointing device's absolute z coordinates
1998-07-27 18:17:08 +00:00
e6f2ea1f40
define a z axis for pointing devices which support this
1998-07-27 16:59:22 +00:00
53017397ee
move these files to sys/dev/sbus. currently uses a hack to access the correct "sbusvar.h" XXX fix me.
1998-07-27 05:43:58 +00:00
8db7ed28a4
ISA with OpenFirmware configuration glue for the CS8900 Ethernet driver.
1998-07-27 01:26:43 +00:00
0f7ec45c46
Add CS8900 Ethernet driver, and ISA front-end.
1998-07-27 01:22:41 +00:00
e9128957a6
ISA front-end for CS8900 driver.
1998-07-27 01:20:43 +00:00
f68dfbe928
Sigh, make this work with the i386 bus_space functions (which have debugging
...
glue in them, and thus subtle syntax quirks).
1998-07-27 01:20:19 +00:00
2d588abad8
Split up the Shark CS8900 driver into front-ends and core back-end (which
...
is here, since the chip can only live on an ISA bus; only the autoconfig
glue is different).
1998-07-27 01:08:51 +00:00
638fb6a638
A first stab att supporting console access with a USB keyboard.
1998-07-26 17:42:48 +00:00
ab207dc49d
add ntwo* at pci? function ?, a T1 network driver.
1998-07-26 03:28:28 +00:00
c5e450957a
add (hopefully) bus-independent hd64570 driver, for the Hitachi serial
...
controller chip.
1998-07-26 03:26:57 +00:00
4e1976a433
Use PCI class/subclass/interface to match USB host controllers instead
...
of vendor/product id. This makes the probe find more controllers
without recompilation.
1998-07-26 00:40:59 +00:00
72de215752
Use PCI class/subclass/interface to match USB host controllers instead
...
of vendor/product id. This makes the probe find more controllers
without recompilation.
1998-07-25 23:23:01 +00:00
12f40f6481
commit this so it gets the right generated from tag
1998-07-25 23:12:16 +00:00
mycroft