>Signed shifts are evil.
>Thanks to Michael Smith for reporting, Jason Thorpe for pointing to the
>report, doing a quick workaround which pointed me to the right code part and
>for testing the final fix.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
- Fixes for Interlace and DoubleScan
- Memorysizedetction for 1MB Bords
- Clockdoubling for PicassoIV and PiccoloSD64
NOTE: Don't use the X11R6.1 Xserver with -useHWC on the SD64
with a gfxmode >80Mhz or you get a broken mousepointer.
- HiColor and TrueColor Support
(doesn't work yet, since it needs some fixes for the XServer)
pass the block number of the boot partition to the kernel. The kernel
will use the block number to determine which disk device the kernel was
booted from and set the boot device based on that instead of the old
"generic" method.
- move the helper programs txlt and aout2bb to the topmost directory
- build the few files from libsa in the topmost directory
* while doing this, hunted down mysterious code expansion: It seems
that ld aligns code segments differently when linking .o's directly
than when using an archive consisting of the same files. Abuse this
effect to make the bootblock even smaller. The floppy boot block
"fdboot" is now small enough to build; add it back to the Makefile.
* while being here, remove a file which was committed by mistake.
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
For some reason it wouldn't get positioned right when mapped in through the
blitter memory mapped location, so switched to the register mapping, which
works.
XXX colormap handling for the cursor is still broken.
configuration. This way, the delay loop is calibrated before graphics and
serial hardware is touched.
This change should smooth pr 2890 by Thorsten Frueauf (also privately
reported by Laurent Badoukh). While the real problem with those is the
paranoically high delay() calls in the grf_cl initialization, it was made
even more visible by the miscalibrated (to the save side) new style delay
loop.
even if you "really didn't change anything dangerous" :-)
- While we're here, save a few bytes and clock cycles during kernel startup:
cinva ic clears the branch cache on the 68060, no need to do it explicitly.
for branch prediction errors (could be used to detect strange binaries),
integer instruction, FP instruction, FP data type and FP effective address
emulations. The latter can be used to diagnose binaries which should be
recompiled with -m68060.
XXX Maybe these diagnostics should be switchable by sysctl or
XXX options DIAGNOSTIC.
making me think that the Blizzard-IV and the Blizzard-2060 scsi
options have nearly identical DMA engines (just with a different
address offset). Alas, this isn't true.
Herewith I replace the "bznsc" (all-new-Blizzard-models) driver with the
"bztzsc" (Blizzard Two Zero).
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
drisavar.h pretends to provide a few bus.h macros, hardwired to
that chip.
This should eventually be replaced by attachment code for the normal
com.c driver, once that one is split up into chip core driver and
attachment code, and once we have busxxx macros in NetBSD/Amiga.
along with toolchain enhancements.
aout2bb transforms a.out files with reloc information into bootblock format
files with a compressed relocation info.
bbstart.s relocates the bootblock using this compressed info, before jumping
to C code.
txlt changes some more of the absolute references to pc-relative ones (we know
we have a single code + data address space).
If you ever try to change this: don't even dare to change the compiler options;
they were found in weeks of trial and error as the ones producing the smallest
(not necessarily fastests) code.
installboot is just a script around dd, for now.
Some ideas by Michael Hitch, Leo Weppelman and Jason Thorpe; bugs added
by myself.
along with toolchain enhancements.
aout2bb transforms a.out files with reloc information into bootblock format
files with a compressed relocation info.
bbstart.s relocates the bootblock using this compressed info, before jumping
to C code.
txlt changes some more of the absolute references to pc-relative ones (we know
we have a single code + data address space).
If you ever try to change this: don't even dare to change the compiler options;
they were found in weeks of trial and error as the ones producing the smallest
(not necessarily fastests) code.
installboot is just a script around dd, for now.
Some ideas by Michael Hitch, Leo Weppelman and Jason Thorpe; bugs added
by myself.
after returning from hardclock(), rather than before. For some reason,
this fixes the 0xffffffff i used to see in the tv_secs of the used cpu
time of some processes.
XXX I don't fully understand the issue.
Earlier, we re-complained about excessive token losses about once a minute.
However, on small ARCnet networks, the token will also be lost if only one
station (us) is active (ifconfig'd down interfaces don't take place in the
token exchange), and our syslog would be filled with repeated messages about
this condition.
Our new code only complains once, starts a timeout() each time a token
regeneration is reported by the chip, and generates a log message about
the regenerated token if it was stable for 15 seconds.
buffer out of the hardware (it is invalid!).
This fixes hangups due to spurious rx interupts.
XXX Maybe I should completely reset the hardware in this case?
We test this condition AFTER the interupt condition, because it is only
disabled during autoconfiguration.
Without this patch, if autoconfiguration takes long enough, eventually a
timer interupt will call hardclock() and panic the machine.
Still untested on -1260/-1230, and hangs when enforcing SFAS_NO_DMA on 2060;
but works with DMA on the latter.
Still untested in a NetBSD-12A environment. (Sorry, don't have the hardware
myself.)
Thanks to Laurent Baroukh for being the guinea pig, and to Jerome Lovy
for forwarding the hardware information Phase V gave him, and to Phase
V for providing it.
Check only the IR bit of the CIAA Interrupt Control Register when testing
for a level 6 interrupt. An interrupt only occurs if IR is set, and IR is
only set if the individual mask bits are set. The individual interrupt
status bits can be set without causing an interrupt if the corresponding
enable bits are not set.
clock_attach() time (for now).
This removes our dependance on the DraCo ROM access timing and frees
the second CIA on Amigas.
b) support for DraCo rev. >= 4 native timer chips.
for a level 6 interrupt. An interrupt only occurs if IR is set, and IR is
only set if the individual mask bits are set. The individual interrupt
status bits can be set without causing an interrupt if the corresponding
enable bits are not set.
"The mapping of IP Class D addresses to local addresses is
currently specified for the following types of networks:
[...]
o Any network that supports broadcast but not multicast,
addressing: all IP Class D addresses map to the local
broadcast address."
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
Don't manipulate the memlist passed from the kickstart rom + bootloader, as
we want it unchanged in case we boot via /dev/reload.
Instead, make z2mem_start known to pmap.c; and use int in pmap_bootstrap to
detect the right segment to correct and the amount.
XXX The transformation of z2mem from physical to virtual kernel addresses
in amiga_init.c must not be done before the pmap_bootstrap() call now!
If z2 memory is used for bounce buffers, it used to be stolen in
amiga_init.c, but would not be removed from the memory list there, but
in pmap.c the memory list would just be corrected.
a) the sizes subtracted got out of sync.
b) the memory segment to subtract from was guessed in pmap_init, and not
necessarily right. (e.g. consider a graphics board whose fraem buffer gets
mapped in by the RO at 0x200000, and a memory board which maps at 0x400000)
The new code subtracts the stolen aount of memory from the memlist parameter
given to the kernel by the loader, and pmap_init just doesn't see it anymore.
- due to a merge error, 2 line were missing making all the kernel data area
cache inhibited.
- due to a misunderstanding of "kstsize" units, all but the first page of
the kernel segment table was copyback cached on the '040/'060 which
should have caused sporadic user process segmentation faults or
kernel endless loops on the '060, under heavy load (when lots of
userland pagetables are in-core), although the problem was not yet
observed.
an unrelated bug report. This will make kernel startups a bit more readable
in the presence of unsupported hardware.
Information contributed by Andreas Bussjaeger.
existence of the SCSI hardware in the boards adress region.
Thanks to Oster Nerhus for the detailed bug report and to Ralph Schmidt for
the recommended probing method.
in a more elegant way, but it works as is, and we need it now.
- Add a README and Makefile for the above. Note that this directory should
NOT be added to ../Makefile's SUBDIRS.
piece of hardware into kernel virtual memory (was only a guess 'til now).
XXX Unfortunately, the hardware vendor reserves the right to change this in
future DraCo revisions. We must rethink delay() and DELAY(), at least for the
DraCo, soon.
For these CPU's, you have to use the ptest operation to search the mmu
tables in order to decide whether it is a real bus error or just a
page fault or write protection violation.
Our old code assumed user space always when calling ptest, and
erroneously assumed the BUSERR bit in the ptest output (mmusr
register) is the only indication for bus errors to check.
In fact, we have to follow a multistage decision tree to decide. 68060
CPUs are much easier to handle correctly.
clear which switches the video signal on and which off.
Make all grf_??.c (which supported it) use the same polarity of the test.
While being here, use a > test instead of implicit != to make it extensible
to darker than dark values for power managment systems.
as the Fastlane Z3, but is different enough to let the kernel crash.
Closes PR #2492 by Matthias Scheler. [thanks also to Ralph Schmidt for
confirmation of the patch]
- grf_cv.c, grf_cvreg.h, ite_cv.c: some cleanups
- grf_rh.c, grf_rhreg.h, grf_rt.c: new blank ioctl and some KNF
- grf_et.c, grf_etreg.h, ite_et.c: new graphics driver for et4000 based board
(oMniBus, Domino and Merlin)
- grfabs_cc: fix PR#2034
- grfvar.h: new grfunit for GRF_ET4000_UNIT
- scsidefs.h: no longer useful
- zbus.c: new entries for: Piccolo SD64, oMniBus, Domino and Merlin
- new fbio.h in arch/amiga/include, defining only FBIOSVIDEO
- add an IOCTL translation to arch/amiga/dev/grf.c
- add screenblank to the list of specials to build on amiga.
This should reduce the possibility of a panic when unable to allocate
a new pv_entry under low memory conditions.
Changed a couple of kmem_free() calls to kmem_free_wakeup() as in the
hp300 pmap.c.
-Wall cleanup: unused variable when M68060 not defined.
* for the M68060 part: store buffer and branch target cache aren't
enabled yet (this needs cleanup of lots of locore.s code which is a
maze of little passages, all a little different) (and it wasn't yet
tested in an accellerated Amiga, only in the DraCo).
I've included a workaround for 2 of the CPU bugs in chips with Masks
1F43G and earlier, but didn't bother to deal with the can of worms
in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more
reported at kernel startup time, or at least mention it (or the mask
revision, if available) when reporting problems.
* for the DraCo: only machines with a CIA timer.
I assigned machine id 32000+nn (0x7Dnn), where n is the machine
readable Quicklogic custom chip revision (also printed at boot
time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't
guaranteed to have any CIA (we don't have a driver for the new timer
yet).
Supported are:
- MF-II keyboards on the native interface and A3000 keyboards via
the CIA.
- builtin SCSI interface (yet another instance of siop)
- CIA timer.
- Zorro II devices which don't do DMA (don't get mapped to Zorro II
address space in the DraCo)
- "local bus" devices which are autoconfigured by the boot rom
(should be all); only an Altais driver is there (looks like a Retina Z3)
Not yet supported are:
- native timer of newer machines.
- Real Time Clock.
- serial, parallel + floppy on the SuperIO chip (that is also: no mouse)
XXX You need an enhanced boot loader, which will committed in a few days.
XXX std.draco should and will go away.
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
This removes the need to have enough chip memory to load the kernel
when booting. Kernel memory is dual-mapped (VA == 0 and VA == PA)
for enabling the MMU, and the VA == PA mapping removed after start_c()
has completed. Chip memory is still required for the /dev/reload
process.
Startup modified to work with kernel loaded directly into fast memory.
This removes the need to have enough chip memory to load the kernel
when booting. Kernel memory is dual-mapped (VA == 0 and VA == PA)
for enabling the MMU, and the VA == PA mapping removed after start_c()
has completed. Chip memory is still required for the /dev/reload
process.
loading into fastmem. This removes the requirement that the kernel fit
into chipmem.
Add a -Z flag to force loading into chip memory.
Add a -s option for compatibility with my bootblock loader.
Move the test exit to just before starting the kernel; this lets the
test mode actually load the kernel and do the version checks.
against the MMU switch code being in different locations between
the running kernel and the new kernel. Returns ENODEV if the reload
fails.
Change the error return from EFAULT to ENOEXEC when kernel_reload
gets a short write on the exec header.
Clean up the debugging code a bit and the warnings from -Wall.
Don't define ESDEBUG - it can now be set from the config file.
If the Ethernet chip gets reset during the copy of the transmit buffer,
requeue the current packet and reinitialize the controller. This recovers
from an apparent hardware bug when running on my A2000/Zeus system.
Don't seek to track 0 before checking for diskchange: if drive steps,
the diskchange flag is cleared. Just select the drive, then test for
a diskchange.
Clean up for -Wall with FDDEBUG defined, and fix a message typo.
Only call Debugger() if DDB is defined.
If the wait for reselect is interrupted and sc_nexus was NULL, only
print the debug message if DEBUG is defined.
Argh, why is a fuction from the RetinaZ2 console driver in the console
driver for the RetinaZ3 ? Fixed.
Fixed some warnings from -Wall if you don't use -DDEBUG
allow any baudrate the hardware allows, and to forbid two baudrates
(50 and 75) which the hardware does NOT support but which the old
speed conversion table pretended to support.
- Added support for multiple floppy drives
- CyberVision64:
- has now a real console mode
- another bugfix for boards with the new S3 chip
- Ariadne:
- fixed crashes with aeput (mbuf failure)
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
