fe74be001b
Driver for Texas Instruments' thunderland network controller (present in some
...
Compaq products).
1997-10-17 18:38:23 +00:00
b35651ec97
kern/4267 (Takeshi Nakayama): Add a 'len' parameter to cd_scsibus_get_mode and
...
cd_scsibus_set_mode, to specifie the real len of "data" we need. These
functions were broken when scsi_cd_write_params_page was added to
scsi_cd_pages, thus changing the len of scsi_cd_mode_data.
1997-10-17 17:54:33 +00:00
10fcf021a5
Generic functions for the MII layer. mii attaches to mii-capable network
...
adapters, and provide media-selections and status to the parent.
This includes drivers for the Thunderland integrated PHY, and
National Semiconductor's DP83840A.
Note: The interface betweeen network controller and mii is not complete yet,
and will need some minors tweaks to support media auto-selection.
1997-10-17 17:33:45 +00:00
6fca562323
Generic driver for read/write i2c devices, and for Microchip Technology's
...
i2c eeproms.
1997-10-17 17:21:14 +00:00
b04f385510
PR/4282: Dave Huang: add logical id for boca modem.
1997-10-17 13:41:29 +00:00
801620373d
Define width_names[] only when PCICDEBUG is defined.
1997-10-17 09:37:12 +00:00
54a45a47c8
EN1207 definitions
1997-10-17 09:26:58 +00:00
4eef29b72f
No need to cast a generic pointer.
1997-10-17 07:59:39 +00:00
11446b9b6e
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it.
...
No optionboards yet for Melody, only audio driver.
MPEG data types for audio.c
1997-10-16 23:58:10 +00:00
25ea46120a
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it.
...
No optionboards yet for Melody, only audio driver.
MPEG data types for audio.c
1997-10-16 23:57:56 +00:00
b2004a534c
Make sure the 'input' class is used even for the 1345 mixer.
1997-10-16 23:34:57 +00:00
c66b8643d1
Pull marc-pcmcia branch down from trunk.
1997-10-16 23:27:16 +00:00
376d502a22
Pull marc-pcmcia branch down from trunk.
1997-10-16 23:23:14 +00:00
5345a8bef9
Pull marc-pcmcia branch down to trunk.
1997-10-16 23:21:46 +00:00
befea59210
Pull marc-pcmcia branch down to trunk.
1997-10-16 23:21:41 +00:00
b3620a0f8d
Pull marc-pcmcia branch down to trunk.
1997-10-16 23:18:18 +00:00
12e22025c4
Remove interrupt handler cookie from aic_softc.
1997-10-16 22:57:02 +00:00
735b77fa73
Create new structure aic_isa_softc and hold interrupt handler in it.
1997-10-16 22:55:34 +00:00
4d3bfb2510
Fix pr's port-i386/4127 kern/4190 kern/3700.
1997-10-16 22:02:27 +00:00
119ee74bb4
An ISA Plug-and-Pray attachment for NE2000-compatible cards.
1997-10-16 17:18:29 +00:00
2b42743910
Add support NE2000 ISAPnp boards (only DEC DE305 supported now).
1997-10-16 17:16:36 +00:00
31ab81c6e4
Aignore interrupts if the device isn't open.
1997-10-16 16:41:18 +00:00
9d865fc8f0
Fix a misspelling of slave in a comment.
1997-10-16 15:16:34 +00:00
940e1b9935
Fix a thinko in last night fix. We must set the media if we have reset
...
the chip but if we haven't the the media isn't changing, don't do anything.
1997-10-16 13:12:56 +00:00
8e4d927ebf
Define FALSE and TRUE locally.
1997-10-16 03:16:44 +00:00
ce61c6263d
Adjust for new "com" driver home.
1997-10-16 00:50:48 +00:00
a35a2a56e4
Garbage-collect "com" device declaration.
1997-10-16 00:47:23 +00:00
bc6479768b
Adjust for the new "com" driver home.
1997-10-16 00:29:28 +00:00
dfba65768d
Moved by repository copy magick to sys/dev/ic.
1997-10-16 00:18:54 +00:00
1ccf0984c2
"com" driver files copied by repository copy magick to sys/dev/ic, and
...
adjusted for their new home.
1997-10-16 00:01:00 +00:00
9ba1ceb091
Pulldown from marc-pcmcia branch.
1997-10-15 22:00:10 +00:00
2e1df18229
Cleanup ISA probe code. Don't collect info first. Just do the probe.
1997-10-15 21:26:51 +00:00
2939780605
Garbage-collect some old i386 console stuff that is no longer used, and
...
add a comment about something to be fixed later.
1997-10-15 21:13:36 +00:00
0dc780c27d
Fix media/console interaction problem on Alpha. Fix 21142/21143 problems
...
with 10Mb/s links.
1997-10-15 19:06:59 +00:00
2a5a426a31
Some changes to get the 21142/21143 to work in 10Mb/s mode.
1997-10-15 18:51:00 +00:00
b1ba3c5488
Pulldown from marc-pcmcia branch: minor tweaks to make this a completely
...
bus-independent driver, and garbage collect a few unnecessary things
from the softc.
1997-10-15 16:54:39 +00:00
44365b6619
Bring back the optimized ether_cmp() that was lost when the
...
LLADDR() changes went in. Mainly relevant on the Sun3/50,
where LANCE_REVC_BUG has to be defined. Tested on sparc.
1997-10-15 16:34:10 +00:00
72dbc31c75
clean up ioctl arguments.
1997-10-15 07:22:46 +00:00
b9f6e61f9d
Add and/or update rnd_*() hooks
1997-10-15 06:12:44 +00:00
66f8a19d70
back out previous change (committed in error)
1997-10-15 06:08:27 +00:00
f9370ddc7a
Add and/or update rnd_*() hooks
1997-10-15 05:55:13 +00:00
1d74fdb6a3
minor formatting change
1997-10-15 05:48:56 +00:00
edf79539db
Add another SB AWE64 Value.
1997-10-15 05:13:31 +00:00
4321b83ee2
Pull following change from marc-pcmcia branch:
...
> revision 1.1.2.4
> date: 1997/10/15 01:01:57; author: enami; state: Exp; lines: +10 -8
> Use bus_space_write_1() directly instead of NIC_PUT(), since
> - same io port is accessed by bus_space_read_1() in the same function, and
> - can bypass sc_reg_map[].
1997-10-15 01:15:51 +00:00
061f16048b
Pulldown from marc-pcmcia branch: PCI front-end for the "ne" driver.
1997-10-14 23:12:17 +00:00
62e78a5174
Correct a comment.
1997-10-14 23:06:30 +00:00
ec0566e1f8
Pulldown from marc-pcmcia branch: garbage-collect NE2000 support from
...
this file. The "ne" driver is now used, instead.
1997-10-14 23:04:19 +00:00
4dee791caf
Pulldown from marc-pcmcia branch: ISA front-end for "ne" driver.
1997-10-14 23:01:10 +00:00
457454d81f
Pull down from marc-pcmcia branch: Common code used by NE2000 and compatible
...
ethernet cards.
1997-10-14 22:54:09 +00:00
768cd3034d
Pull down from marc-pcmcia branch:
...
Add support for power management.
1997-10-14 21:41:00 +00:00
10708da893
Pull down from marc-pcmcia branch:
...
Minor tweaks to deal with PCMCIA differences, and support for power
management.
1997-10-14 21:28:37 +00:00
deaddb0981
Regen.
1997-10-14 20:53:34 +00:00
bff93e5477
Pull down from marc-pcmcia branch.
1997-10-14 20:52:38 +00:00
0d79fbe5c5
Don't test for unused methods.
1997-10-14 18:43:42 +00:00
01645a9745
Minor improvement to avoid re-defining days_in_month().
1997-10-14 17:25:57 +00:00
59129515bb
Finalize the isa/lpt.c split:
...
The isa attachment code is in isa/lpt_isa.c now, which attaches to the
already created ic/lpt* files.
You don't need to change your config files, but you need to re-"config" if
using lpt at isa.
XXX The "lpt" device definition should be in sys/conf/files instead, but to
my knowledge, there are some ports which have private copies of lpt, and would
choke on that. No need to make people unhappy 7 days before release branching.
1997-10-14 15:50:15 +00:00
6aca6ab9a4
Apply Ian Dall's patch from kern/4004. Ian's comment:
...
The following patch employs a smarter adaptive polling
scheme. It also improves the comments, in particular giving
due credit to Phil Budne for his efforts in nunderstanding
the device. It also relaxes the pattern for auto config so
more devices match.
1997-10-14 11:18:18 +00:00
837124b35c
add bebox
1997-10-14 07:15:45 +00:00
be3b267427
Update notice to indicate the the IDEAS were derived from Ted's code, not the
...
code itself, per phone conversation with Ted
1997-10-13 19:59:26 +00:00
c713bc804e
update copyright to include the CORRECT spelling of Ted Ts'o's name
1997-10-13 18:34:29 +00:00
80513cb5ae
o Make usage of /dev/random dependant on
...
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
1997-10-13 00:46:08 +00:00
d7e08a2471
Don't be verbose by default.
1997-10-12 18:49:09 +00:00
05b9221a1a
Hello? If we're doing block positioning a timeout of greater than 5 seconds
...
is probably going to be necessary.
1997-10-12 18:34:00 +00:00
3081c6f8cf
AudioC[A-Z] -> AudioC[a-z]
...
AudioElinear -> AudioEslinear
1997-10-11 12:43:51 +00:00
b551325998
AudioElinear -> AudioEslinear
1997-10-11 12:36:04 +00:00
2d019e5efd
AudioC[A-Z] -> AudioC[a-z]
1997-10-11 11:28:49 +00:00
3cdff9d435
GETPROPS does not indicate whether the device is currently in full-duplex
...
mode. Reinstate GETFD to return this information.
1997-10-11 11:16:28 +00:00
e4e727226c
For network devices, collect timing information and mix into the pool,
...
but do not assume any entopy is gathered. It can be enabled using an
IOCTL again if the user desires.
Note that the mix function uses xor, so at worse an attacker can twiddle
bits in the pool, but not into a known state assuming it started as
an unknown.
1997-10-10 16:35:00 +00:00
7bbb69534f
Add a missing splx(). From augustss.
1997-10-10 02:05:36 +00:00
1c276eafe2
Add hooks to insert timing info into the random system
1997-10-10 01:19:37 +00:00
b5feb41072
Add hooks to insert timing info into the random system
1997-10-10 01:09:03 +00:00
2021c11247
Addition of /dev/random and in-kernel random value generation.
...
Over the next few days (thank goodness for long weekends) I'll be hunting
down device drivers and adding hooks to gather entropy from many devices,
and adding the conf.c changes to the various port's device structs to
define major numbers for /dev/random and /dev/urandom.
1997-10-09 23:13:12 +00:00
d6ae2cd7fd
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 08:03:42 +00:00
11a27a1132
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 07:57:17 +00:00
2ff9e92859
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 07:50:22 +00:00
324ce8d6cb
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 07:37:50 +00:00
827918e4ab
fix warnings when -DAHC_DEBUG
1997-10-09 02:17:36 +00:00
45fbe5305f
Cosmetic changes;
...
- dereference a pointer to function explicitly.
- fold long line to fit columns < 80.
- put whitespaces around a binary operator.
- don't put a single statement into a block.
1997-10-09 00:53:28 +00:00
ba0165bec0
A) At least IBM 3590 tape drives return a NOT READY error if issued a LOAD
...
to BOT command- even if at BOT. Urk. B) Make READ POSITION SCSI_SILENT.
1997-10-09 00:43:26 +00:00
26a5591b8a
Oops, fix a couple of typos.
1997-10-08 23:35:41 +00:00
5e05593163
Implement DIOCGDEFLABEL.
1997-10-08 23:23:13 +00:00
939e074dcc
Implement DIOCGDEFLABEL.
1997-10-08 23:05:22 +00:00
8d35f4cdeb
Slight formatting change.
1997-10-08 21:39:25 +00:00
f63551893b
The bit pointer field is a 3 bit value- not 4.
1997-10-08 17:17:09 +00:00
3dffd3e74a
Regen.
1997-10-08 17:01:33 +00:00
f1aefc827c
Correct spelling of Millennium.
1997-10-08 17:00:43 +00:00
4f2068ec29
Sanity check hi/lo water mark settings better.
1997-10-07 22:40:43 +00:00
8ecd26aeb3
Add the GUS PnP driver.
1997-10-06 22:42:56 +00:00
8eb7170ff8
Back out last change. (Partially my fault, for not reviewing it close
...
enough.)
1997-10-06 21:01:23 +00:00
d5ecfe9e6b
Keep filter when setting source on SB Pro.
...
Close PR 2593.
1997-10-06 20:16:25 +00:00
64ff55911c
From Enami Tsugutomo: Busify and split the aic6360 driver.
1997-10-06 19:49:17 +00:00
22a818e5a4
GUS PnP sound card driver from Kari Mettinen.
1997-10-06 16:05:11 +00:00
72251c67c9
Driver for the Interwave audio chip used in the GUS PnP sound card.
1997-10-06 16:03:34 +00:00
a5b1bb00fd
pcidevs change regen.
1997-10-06 06:19:24 +00:00
7dbc234635
Added entries for GLINT 3D chips.
1997-10-06 06:18:07 +00:00
176a81b2c5
Copyright assigned to The NetBSD Foundation.
1997-10-05 18:37:01 +00:00
616e0b7e33
Copyright assigned to The NetBSD Foundation.
1997-10-05 18:26:38 +00:00
4371d4ef78
Remove the while loop from zsc_intr_hard(). It caused problems on
...
some machines, and those that really want to can just call this
function in a loop until it returns zero.
1997-10-04 22:30:30 +00:00
d2f48f6b3e
Add yet another chip variant: FAS216, used by the amiga Phase5 SCSI boards.
1997-10-04 03:59:00 +00:00
d9fba6bbfb
Export kbd_docmd() because the sparc fb.c wants it.
1997-10-03 23:04:46 +00:00
a9ad6cae19
pci_mapreg_info() has been changed to take arguments like pci_mapreg_map()
1997-10-03 18:45:39 +00:00
7376003aeb
Cosmetic change; delete one space character.
1997-10-03 16:40:35 +00:00
3b3dfc2156
Don't define AUDIO_PLAY twice (accidently add in last commit).
1997-10-03 15:13:29 +00:00
f86cc57e92
- Rename PIDEBUG back to SCSIDEBUG, since other files are still
...
using SCSIDEBUG.
- Don't #undef PIDEBUG unconditionally.
1997-10-03 15:12:12 +00:00
432b9f1831
Make this compile on alpha and, presumably, other non
...
_BROKEN_INDIRECT_CONFIG machines.
1997-10-03 07:32:50 +00:00
20cf0e1cc1
fix missing com_kgdb_attached() argdecl, from Michael C. Richardson in PR 4196
1997-10-03 06:11:35 +00:00
451ec4af35
Clean up and comment the device types, and add the "enclosure services",
...
"storage array", and "IT8" types.
1997-10-03 02:04:17 +00:00
7b3dd7f5c3
Define the REZERO UNIT command.
1997-10-03 01:56:52 +00:00
5757f59312
Define the "write parameters" mode page.
1997-10-03 01:55:20 +00:00
284a78edc2
kern/3022: make sure that printing sense info in SCSIDEBUG case starts at
...
the right place and contains the right number of bytes.
1997-10-02 16:03:42 +00:00
78e5dc866c
Silly boy.... don't print out sense info if the command was marked SCSI_SILENT,
...
and print the opcode with a leading 0x if you're printing in hex.
1997-10-01 18:47:01 +00:00
e9cc9ec6cc
Many thanks to Wolfgang Rupprecht for spotting this... In order to be sure
...
about actual position when reading tape position, you should flush any
pending writes. Well, if the tape is write protected, some drives don't
see the zero count WRITE FILE MARK command as a no-op and complain. Dumb!
1997-10-01 18:45:02 +00:00
e30fed33a8
regen
1997-10-01 18:09:20 +00:00
d54cc43bfc
Correct a number of Intel PCI devices, sync with names used in data sheet.
...
Add newer Intel / VIA i386 chipsets.
Correct one S3 chip, add one.
Mostly from Carl Shapiro <css@samsara.dialup.access.net> per PR kern/4169
and kern/4170 (identical).
1997-10-01 18:08:23 +00:00
c557d7e759
Add missing SCSI_DATA_IN when issuing a READ_ELEMENT_STATUS command.
...
Noticed by Dave Huang <khym@bga.com>.
1997-10-01 05:39:56 +00:00
d7d845c3d2
Cosmetic changes to keep coding style consistency in this directory;
...
- Indent with tab of width 8.
- Use four column to indent continuation line.
- Fold long line if possible.
- Use return (xx) instead of return xx.
- Compare pointer against NULL instead of testing like boolean.
- Delete whitespace at the end of line.
- Delete whitespace in front of function call operator.
- Delete whitespace after cast.
- Dereference a pointer to function explicitly.
- Add an empty line after local variable declaration.
- Use NULL instead of (char *)0.
- Dont use block for single statement.
1997-10-01 01:18:38 +00:00
a2512e8ec5
Add TIOCM{BI{C,S},{S,G}ET} from revision 1.98. As Charles says these
...
interfaces are slightly broken and should be obsoleted, but some programs
are using them and also they are useful for debugging.
1997-09-30 21:51:43 +00:00
9e217027ee
Add in mtop operation MTCMPRESS, which can enable or disable tape compression.
...
The method for doing this is to try and use the DATA COMPRESSION mode page
first, followed by the DEVICE CONFIGURATION page (this is because most newer
tape devices are now using DATA COMPRESSION instead of DEVICE CONFIGURATION
pages).
Add in the logical && hardware read position and set position ioctls. Oddly
enough, because NetBSD is limited in having the driver track file && record
numbers, the usual agony over what to do once you use logical or hardware
block positioning can be avoided. Amusing.
Make a minor change so that for SCSIVERBOSE cases that SCSI_SILENT in
the xs' flags is still observed.
1997-09-29 19:33:03 +00:00
d3349ea385
Add SCSI-3 DATA COMPRESSION page structure.
...
Add READ POSITION command structure. Add READ_POSITION and LOCATE opcodes.
1997-09-29 19:29:02 +00:00
d3a7613827
midway update:
...
[1] add EN_ENIDMAFIX - the byte-aligner on the ENI version of the card
appears to lose under heavy load so avoid using it. see comment
in midway.c for full details.
note that the Adaptec version of the card works properly under
load.
detected by Kenjiro Cho <kjc@csl.sony.co.jp> [confirmed by chuck]
fix by chuck & kjc
[2] update some freebsd specific code [from kjc]
[3] for circular buffers: ensure there is always one free slot so
that we can easily tell the difference between a full and
empty list. re-structure a few loops to reflect this.
fixes a problem with mbufs being free'd while still in DMA,
and makes drive a bit more robust.
detected and fixed by kjc
1997-09-29 17:40:38 +00:00
9f482818bc
Add 'initialize element status' command; note (for future fixing in ch.c)
...
that a number of jukeboxes can't cope with DBD (disable block descriptors)-
we'll have to fix that some day.
1997-09-29 17:32:23 +00:00
7d8a3528cb
Add quirks entries for Hitachi DK515C disk drives and Cipher ST150S tape drive.
...
Closes PR kern/4171 from jbernard@tater.mines.edu .
1997-09-29 11:00:36 +00:00
6716542383
A little cleanup and print more error messages.
1997-09-29 01:41:30 +00:00
9b8a83f50f
Fix a misspelling.
1997-09-29 00:55:26 +00:00
3ad599d701
First part of splitting lpt.c, and the NetBSD/Amiga "supio" frontend. Needs
...
a bit more work to allow an ISA frontend.
1997-09-27 22:44:11 +00:00
7b31453c6f
Rearrange the initialization a bit so we have SCBs available in
...
wds_inquire_setup_information(), rather than faking it.
1997-09-26 04:00:09 +00:00
1148723a5f
Set sc_dmat.
1997-09-26 02:50:18 +00:00
76786b38b6
Mimmick the logic used by other drivers to determine if we should use
...
memory-mapped or i/o-mapped access to the device registers, and always
choose memory-mapped if it is enabled. In particular, do _not_ explictly
disable the space we decide to not use, as this confuses some versions
of Alpha console software (which are arguably buggy because of this
problem).
Also, fix a logic error pointed out by Ross Harvey <ross@teraflop.com>
that would cause memory-mapped access to never be enabled.
1997-09-24 22:46:29 +00:00
a2f2e87677
Return the rigth value in the interrupt handler. This change the semantic
...
of wdc_atapi_intr, so we check for ITSDONE rather than the return value for
a pooled command.
1997-09-24 17:00:55 +00:00
3e5cee3ce5
If the region size turns out to be 0, return an error. This is what will
...
happen if we try to use a mapping register that's not actually defined.
1997-09-23 23:08:47 +00:00
966e96d880
Regen.
1997-09-23 22:36:33 +00:00
d23f3059e5
Add the Ensoniq AudioPCI.
1997-09-23 22:35:48 +00:00
3979615b0d
ncr_reg.h -> ncrreg.h per Dave Huang
1997-09-23 02:39:15 +00:00
69fbaa747d
updates from FreeBSD via Dave Huang <khym@bga.com>
1997-09-23 02:27:43 +00:00
2896e07556
Allow SDOUTSTANDING to be defined elsewhere (e.g., config file).
1997-09-20 18:56:30 +00:00
e8733ec0da
mark scsipi_make_xs() as potentially unused, so that this can be
...
compiled with -Wunused without optimization/inlining enabled.
Also, make it a little bit closer to KNF.
1997-09-19 23:53:33 +00:00
38ea6714c9
New microcode release (1.02) from qlogic for the 2100.
1997-09-19 14:15:54 +00:00
4be590238f
Another couple NOMODESENSE drives.
1997-09-19 14:08:48 +00:00
82625dc61e
Cosmetic Changes; make coding style closer to other part of this file.
...
(This version is identical with version 1.109 except whitespace changes.)
1997-09-19 01:17:37 +00:00
a0c4d0c2e6
Add new ioctl OSCIOCREPROBE and OSCIOCIDENTIFY to support binary
...
compatibility with NetBSD 1.2.
1997-09-19 00:59:49 +00:00
718fb97e11
Support for the upcoming NetBSD/Amiga Hypercom driver family:
...
* support chip clocks != COM_FREQ, by introducing sc_frequency (for the
mainline code) and adding a frequency parameter right after the rate
parameter to comcnattach() and com_kgdb_attach().
- Make com_isa and com_multi initialize sc_frequency to COM_FREQ.
- Make i386/machdep.c and alpha/dec_xxx.c call com*attach() with the freq.
parameter.
* supio_attach_args get two more fields: a sc_ipl and a sc_arg, both ints.
- com_supio uses the first for interupt establishment (all childs will, as
soon as they exist) and the 2nd for sc_frequency.
- drsupio passes sc_ipl alway as 5, and for the "com"s, sc_arg as 16*115200
- hyper will pass sc_ipl as 6, and sc_arg as 16 * 460800
1997-09-16 20:34:23 +00:00
b342ad4ea3
Regen.
1997-09-15 15:08:34 +00:00
cc58dfb1b7
Add some of Compaq's network products.
1997-09-15 15:02:36 +00:00
1cdcb2d362
Get rid of `register'.
1997-09-14 09:03:33 +00:00
7bc1f9d060
Recognize SB AWE64 Gold.
1997-09-13 13:37:28 +00:00
0f0563f57f
Declare TCVERBOSE by defopt in files.tc. Include opt_tcverbose.h in tc.c.
1997-09-13 08:52:23 +00:00
4d15bd0b78
Declare SCSIVERBOSE by defopt in files.scsipi. Include opt_scsiverbose.h
...
in scsi_base.c and st.c.
1997-09-13 08:51:15 +00:00
377e2c7b82
Declare PCIVERBOSE by defopt in files.pci. Include opt_pciverbose.h
...
in pci_subr.c.
1997-09-13 08:49:50 +00:00
7f3eb8e4fb
Declare EISAVERBOSE by defopt in files.eisa. Include opt_eisaverbose.h
...
in eisa.c.
1997-09-13 08:48:59 +00:00
f762783999
Wierd- well, what isn't with devices? Anyway, the type code for the ISP
...
chip on AlphaStation 500 is 2- which wasn't handled, and bad things happened
because the default case wasn't sane. Both are corrected now.
1997-09-13 05:18:30 +00:00
4f7a116064
Add missing "break;" statements in the code that determines the
...
media setup by the Alpha SRM console software.
From Ross Harvey <ross@teraflop.com>.
1997-09-12 22:40:02 +00:00
8f33476972
Make console on multiport cards more likely to work (obvious bug,
...
fix still untested).
Closes PR kern/4095 by enami tsugutomo.
1997-09-12 13:31:10 +00:00
daf8124106
regen
1997-09-12 11:05:20 +00:00
e4c20d6210
another graphics chip...
1997-09-12 11:04:36 +00:00
78b5eb1f52
Create DMA maps on ordinary GUS (non-MAX) cards. Now it should work again.
1997-09-12 10:27:10 +00:00
761c2e275a
Fix bogus comment.
1997-09-12 05:20:52 +00:00
0310453204
The 501 uses 16 ports, and has a wider range of possible I/O address.
1997-09-10 05:40:23 +00:00
03ac1f4a46
Oops. Fix a teensy error in the previous.
1997-09-10 03:31:31 +00:00
7d0a127a3c
If we select a 32k window on the DEPCA, make sure to switch to the lower 32k
...
chunk.
1997-09-10 03:05:39 +00:00
acd1b90617
Some formatting cleanup, and for the ISP2100, the flags hadn't being set
...
quite right, but things worked okay anyhow.
1997-09-10 02:18:19 +00:00
3772f94daf
(for the 2100) The flags weren't set in the right place, but things worked
...
anyway. Wierd. Also, a bit of cleanup.
1997-09-10 02:17:22 +00:00
18430b4e5e
For the 2100- the flags weren't quite right- but things worked anyway. Wierd.
1997-09-10 02:16:13 +00:00
ca07d14b0f
Add SDEV_NOLUNS to another CD-ROM player.
1997-09-09 21:56:01 +00:00
fa0b187898
Make `hashkey' unsigned.
1997-09-09 18:56:15 +00:00
8178ae5997
Uses PLAY_MSF instead of PLAY for the CDIOCPLAYTRACKS ioctl. This avoid a int16
...
overflow in the PLAY cbd when the resquested track(s) are more than 65535
blocks long. Submitted by t-nkyma@tcp-ip.or.jp in PR kern/4092.
1997-09-09 09:07:43 +00:00
25baf39689
Change the way we determine what interrupt routine to use to make
...
it work when drq8 == drq16.
1997-09-09 00:57:10 +00:00
9c76fe8e78
Recognize any of the memory configurations allowed by the EE16 setup program,
...
and a few more that I can't test. Something is still wrong with the mapping of
16k boards, though.
1997-09-07 10:16:07 +00:00
4d51c802c6
Bus-ify GUS driver.
1997-09-06 14:31:34 +00:00
25b465a80c
Bus-ify the GUS driver.
1997-09-06 14:23:13 +00:00
ffcdaf144d
Move around splaudio() to (hopefully) get rid of some rare race conditions.
...
Add a missing call to round_blocksize.
Add some MIDI stuff that will be used in the future.
1997-09-06 01:14:48 +00:00
1acea33632
Fix a couple of field references missed during the scsipi merge.
1997-09-05 17:57:19 +00:00
a5aece0adc
Don't attach worm devices to the CD driver. This is a private hack, and should
...
never have been there !
1997-09-05 16:45:25 +00:00
5d5b3c641f
Restore indentation of SCSIVERBOSE output.
1997-09-05 08:36:40 +00:00
7e062e8a4e
Enable use of bus_dmamem_mmap().
1997-09-05 01:48:33 +00:00
8a24374ad3
Convert this driver to use bus_dma.
1997-09-04 03:39:09 +00:00
702b60b0c1
Add a map to wdc_softc to track the already known devices to prevent them to
...
be probed several times. This fixes the "ATAPI CD probed as wd drive" problem.
Thanks to Geoff Wing <mason@primenet.com.au> for testing this on his hardware.
1997-09-03 07:57:51 +00:00
693b3e7262
Nuke the idea of <machine/options.h>. It completely defeats the purpose
...
of fine-grain option dependencies.
1997-09-02 13:17:47 +00:00
06ecebc8c0
add missing argument to LPRINTF() declaration; from Geoff Wing in PR 4072.
...
I also made inclusion of LPRINTF() dependent solely on the symbol
LPTDEBUG, initialized lptdebug variable to 0 instead of 1, and
matched arguments to format strings in LPRINTF() calls.
1997-09-02 01:37:19 +00:00
e531f18c8b
Pull the SMC91Cxx single-chip Ethernet driver core down from the marc-pcmcia
...
branch. It is also needed by and ISA front-end.
1997-09-02 00:10:55 +00:00
f6914cd0c8
Remove '#ifdef alpha' around bus_space_tag_t uses and includes.
1997-09-01 08:09:28 +00:00
d4afe94f7c
Finish work-around for the re-select bug on ESP100s by dealing with
...
"illegal command" interrupt apparently caused by writing to the chip
while a re-selection is in progress.
1997-08-31 23:09:58 +00:00
420b75952f
Insert a sanity check so we get a panic instead of a kernel page
...
fault if the DMA map is missing.
1997-08-30 17:33:49 +00:00
7886f60e81
Make SB full duplex. Ooops, I forgot this in the last commit.
1997-08-30 10:45:32 +00:00
8c578dc960
Pass down bus_dma_tag_t's as appropriate (per Jason's bus_dma code).
1997-08-30 06:53:57 +00:00
73e975d161
Pass the I/O and memory enable flags through the bridge.
1997-08-30 06:51:07 +00:00
f77eaf96e2
Pull in new file.
1997-08-30 06:48:57 +00:00
aae78d29c3
Don't export pci_*_find() any more.
1997-08-30 06:48:24 +00:00
e2bb22033b
Remove pci_*_find() from here.
1997-08-30 06:47:44 +00:00
5da739c6b8
* Rewrite pci_io_find() and pci_mem_find() using my original pci_map_io() and
...
pci_map_mem(), with appropriate changes for bus_space.
* Add extra arguments for use by pci_mapreg_*(), and make the functions
static.
* Rewrite pci_mapreg_info() and pci_mapreg_map() as wrappers around
pci_*_find(), using the documented interface.
1997-08-30 06:46:58 +00:00
e72ff15736
Substantial rewrite of the SB driver to make it do full duplex on an SB16.
...
Because of the braindead design of the SB the input and output have to
use different precisions (8 and 16 bits). It is possible to set the driver
to use 8 bits on both and it will the emulate 8 bits on the output by
expanding it to 16 bits.
1997-08-29 21:41:36 +00:00
87219fa0e6
Added a quirk entry for the SANYO CRD-254P (from OpenBSD), and
...
one for the MATSHITA CR-574 (from Josef Wulf <wulf@ping.net.au> via OpenBSD).
1997-08-28 14:02:31 +00:00
9f3695bff9
Change an ATAPI_DEBUG2->ATAPI_DEBUG. This debug message is needed when
...
looking what's the autoconfig do on strange harware, and ATAPI_DEBUG2 is
for debuging data transfers (and is really verbose once the machine has booted
from an IDE disk).
1997-08-28 11:05:01 +00:00
22880d02f4
Regen: added SMC83C170 entry.
1997-08-28 00:24:23 +00:00
b7a3500cd3
Add an entry for the SMC 83C170 "EPIC/100" Fast Ethernet chip.
1997-08-28 00:12:44 +00:00
5752a55af4
Zap drq2 if unused.
1997-08-28 00:02:12 +00:00
a79408b6c7
Change match routine to use "audio" as the ROM name.
1997-08-27 22:42:23 +00:00
c58d387b0f
Fix prototype for amd7930_set_params.
1997-08-27 22:33:59 +00:00
d2a9d1970d
Don't deference a bad pointers if you try to open an audio device that's
...
not configured.
1997-08-27 18:54:28 +00:00
25c05417ed
Make this work with __GENERIC_SOFT_INTERRUPTS.
1997-08-27 18:00:13 +00:00
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
a50d4ba893
XXX Add a drq2 locator for the ISA bus. Many sound cards need
...
two DMA channels to do e.g. full-duplex. This allows
a way of specifying the second channel in a sane way.
THIS IS TEMPORARY. The drq2 locator will go away when
the locator system has been changed to allow multiple
values per locator.
1997-08-26 19:26:38 +00:00
955e1e9119
Make sure audio device starts in half-duplex mode and document the fact.
1997-08-26 19:03:55 +00:00
f26fad2f33
Add missing call to vndunlock(), per PR #3811 , enami tsugutomo.
1997-08-26 18:12:58 +00:00
752582ba69
Set KERNEL_RCSID to identify previous change.
1997-08-26 02:38:47 +00:00
6cd95f2a55
rewrite and hand-tune copy_gap16 loops:
...
* hoist code to deal with fragments of a 16-byte chunk outside
main copy loop.
* over 98% of dynamic calls are 2-byte-algnied but not 4-byte-aligned
(due to 14-byte Ether headers). kernel bcopy is poorly tune for this.
Replace bcopy() with inline code tuned to minimize accesses
to DMA buffers, which aren't uncached on mips.
Tested on 5000/240 (3MAXPLUS) and 3000/700 (sandpiper) (mjacob@feral.com )
1997-08-26 01:27:12 +00:00
782324102f
Use if_media to change media type, not IFF_LINK*.
1997-08-25 22:39:55 +00:00
9de64894e9
Fix the "non-broken" indirect configuration so it might actually work.
1997-08-25 22:17:25 +00:00
b2c3b768d3
- Add RCS tags that got lost.
...
- Fix a couple of typos in PCI space configuration.
1997-08-25 19:03:44 +00:00
9c690ec9a6
Add RCS tags that got lost.
1997-08-25 19:02:19 +00:00
a2a13689fd
Merge with 970703 snapshot of Matt Thomas's de driver.
1997-08-25 18:56:46 +00:00
cd7e93c44d
Add mute and channels swap to the mixer capabilites.
1997-08-24 23:50:40 +00:00
0bb9a48c65
Give names to some more mixer registers.
1997-08-24 23:24:51 +00:00
6616d47838
- Change audio_hw_if a little: set_param now sets the play and record modes
...
at the same time instead by using two different calls. This enables
it to check more easily if the combined mode is all right.
- Improve the error checking in audio.c.
- Add a new audio property, AUDIO_PROP_INDEPENDENT, show if the
play and record settings are independent.
- Fix some buglets in audio.c.
1997-08-24 22:31:23 +00:00
4d74b89725
Add trivial conversions between 8 and 16 bits.
1997-08-24 22:20:24 +00:00
785dcbd7f5
Remove indirect brokenness.
1997-08-24 20:06:34 +00:00
48d839e594
Improve error message.
1997-08-24 20:03:51 +00:00
27f30774af
Conditionalize DEBUG printf on dp8390_debug. Pointed out by Jonathan
...
Stone.
1997-08-24 15:22:28 +00:00
8188be767e
Check for KGDB port == console port in a consistent way.
1997-08-24 09:40:16 +00:00
f4e17ffbfe
Use the new com_is_console() to decide if the port is already initialized.
...
XXX shouldn't the attach() use the existing handle if present???
1997-08-23 14:06:17 +00:00
7ac5d81dbd
Use the new com_is_console() to decide if the port is already initialized.
1997-08-23 14:03:54 +00:00
d36e668737
clean up the serial console / KGDB attachment:
...
-put all early console / KGDB initialization into 1 exported function
(com_*_attach()) each, dont use global variables anymore
-use the passed tcflag_t for port settings instead of hardwiring 8N1
-at autoconfiguration attach time, decide if the attaching device is
already console / KGDB by comparing bus tag and base addr (cgd's wish)
-export a function "com_is_console()" for use by driver frontends for
this comparision
-delay setting of cn_tab->cn_dev until autoconfiguration attach
to get the minor number right
-delete unused comcnprobe() and comcninit()
1997-08-23 14:01:32 +00:00
d8453956fc
regen
1997-08-23 13:45:11 +00:00
91c75e9870
Add one more graphics chip.
1997-08-23 13:44:06 +00:00
12ef0b5d17
Merge the FreeBSD-current-970823 version of the "fxp" driver, adds support
...
for more PHYs. Closes PR #3953 .
1997-08-23 09:28:13 +00:00
e349ac7eb5
If SCSIVERBOSE is enabled, call the routine to print out detailed sense
...
information.
1997-08-20 18:20:12 +00:00
e919735e35
Add in (enabled by SCSIVERBOSE option since it adds a fair amount of string
...
gup to the kernel) more detailed SCSI error printing, based off of final
SCSI-2 specification. This will also print out things like progress indicator
errors, and will also dump out additional sense bytes that haven't been decoded.
Also, turned the error message 'DELAYED' to 'DEFERRED' since that's more
accurate.
1997-08-20 18:19:12 +00:00
77116c198a
Add in prototype for routine to print SCSI errors in detail.
1997-08-20 18:11:37 +00:00
8fdd7cab62
Convert WSS driver to use non-broken indirect configuration.
1997-08-20 15:26:25 +00:00
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
f78dfdfe6e
Avoid munging audio_defaults.
1997-08-19 23:35:44 +00:00
e5b75f05d4
Make a slight change to when blocksize, hi- and lo-water marks are
...
recalculated. The new semantics is more intuitive(?) and makes Doom
work :-)
1997-08-18 23:20:09 +00:00
34085fae66
Implement /dev/audioctl. It behaves much like /dev/sound, but only
...
allows ioctl() and can be opened at any time.
1997-08-18 21:19:02 +00:00
4aa2f7013c
A few more SDEV_NOLUNS entries- one tape drive (SONY Beta/VHS) and a couple
...
of PCMCIA card readers (one as T_DIRECT, the other as T_PROCESSOR).
1997-08-17 16:25:11 +00:00
570688abef
Bring back the "comconsattached" flag. It is necessary for starred
...
com devices (on non "__BROKEN_INDIRECT_CONFIG" ISA).
1997-08-16 08:33:08 +00:00
ee328c6f18
This fibre channel disk doesn't support the geometry page.
1997-08-16 01:05:51 +00:00
50d4bdf35c
Merge foo.
1997-08-16 00:56:52 +00:00
695bb7c37e
Addition of PCI Qlogic ISP2100 (Fibre Channel) support meant a slight
...
change in f/w layout.
1997-08-16 00:30:37 +00:00
24add65376
Major rework to support Qlogic ISP2100 (Fibre Channel PCI card). Also now
...
able to read SXP registers (instead of panicing). Probably have done a bit
of setup overkill- we now alloc some scratch memory for the 2100 that I thought
I would need for the Port database, but so far I haven't needed to retrieve
the port database. Well, early days yet.
1997-08-16 00:28:10 +00:00
9de423f255
Add in PCI_PRODUCT_QLOGIC_ISP2100.
1997-08-16 00:25:43 +00:00
14a7730c16
*Major* differences to support the Qlogic 2100 (Fibre Channel PCI), as well
...
as being able to do microdifferentiation of the ISP SCSI chip; a couple of
bug fixes, and the beginnings of some watchdog support.
1997-08-16 00:22:11 +00:00
7540ed1699
Differences necessary to support the Qlogic 2100 (Fibre Channel PCI
...
Card)
1997-08-16 00:20:28 +00:00
49d40727ff
Defines and structures necessary to support the Qlogic 2100 (Fibre Channel
...
PCI card); Some additional defines to try and manage various flavors of
the SCSI host adapters (parameters for various SYNC modes).
1997-08-16 00:18:36 +00:00
2c7696de16
Additional defines and structures necessary to support the Qlogic ISP 2100
...
Fibre Channel PCI card.
1997-08-16 00:16:40 +00:00
f1947d6a44
add SDEV_NOLUNS for my scanner (UMAX S-6E)
1997-08-14 22:17:32 +00:00
8aa62d76fc
Regen with new RCS ID. (thanks, Bernd)
1997-08-14 16:31:13 +00:00
b426bd9be3
-Export variables needed for system console initialization.
...
-Enable line break interrupt for DDB on a serial console.
-Share initialization code between DDB and KGDB.
1997-08-14 16:15:15 +00:00
e588696c8e
Include some more stuff.
1997-08-14 15:41:49 +00:00
0076beb284
fix multi-port serial drivers to reflect recent changes to com driver for console/kgdb
1997-08-13 21:26:52 +00:00
d5998780c0
KGDB improvements:
...
-Separate KGDB port initialization and softc related stuff to allow
KGDB to be attached in early system startup, before autoconfiguration.
-Export the variables needed by md code to hand-craft bus tag/handle.
-Fix initialization to enable interrupt by line break.
-Call DDB/KGDB at line break (move DDB call from the softirq handler
to the hard handler because it should work without a tty attached too).
1997-08-12 17:25:43 +00:00
32407c5e4f
don't forget to unmap read port in match routine, if successful; also
...
ensure sc_ncards is initialized
short-circuit probing for cards once first is found in match routine
add support for !__BROKEN_INDIRECT_CONFIG
1997-08-12 07:38:10 +00:00
bouyer