7083b63277
Back out previous; I'm punting PowerPC to tsubai or sakamoto.
1998-09-16 23:51:27 +00:00
ef3f4d39df
Need 103 longs for jmp_buf now (128-bit signal mask, at the front of the
...
jump buffer).
1998-09-16 23:33:18 +00:00
3d4e54f11f
Need 87 longs for a jmp_buf now (we use sigcontext, which grew).
1998-09-16 23:15:08 +00:00
7b32475079
Define the new sigcontext structure.
1998-09-16 23:14:15 +00:00
6385066c76
Need 13 longs for jmp_buf now; 128-bit signal mask.
1998-09-16 23:13:57 +00:00
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
59e5588098
Map the per-CPU counter registers into each cpu info area.
1998-09-16 13:39:48 +00:00
49b5114713
Make all cpu info structures accessible through an array `cpus[_MAXNCPUS]'.
1998-09-16 13:36:23 +00:00
43f5b65e23
Define the new sigcontext structure.
1998-09-15 23:14:40 +00:00
a034a22862
Need 21 longs for jmp_buf now, due to 128-bit signal mask (and use
...
of the sigcontext structure in the jmp_buf).
1998-09-15 23:06:41 +00:00
543070847c
Can't afford a 1K buffer in the data segment.
1998-09-15 20:03:50 +00:00
573d1d344f
Add the DrHw value for the MicroConversions 2124NB II display adapter,
...
from Paul Goyette.
1998-09-15 16:09:44 +00:00
0ad1257add
sub-arch protection.
1998-09-15 13:12:25 +00:00
f1c16a1b25
Oops, forgot this one in the vmebus renaming (Julian Coleman).
1998-09-15 10:45:11 +00:00
fb38024157
Use `swap' to install page-table entries which is recommended practice
...
for MP configurarions.
1998-09-14 22:45:36 +00:00
1736bda754
Define `swap'.
1998-09-14 22:43:29 +00:00
dbebd9b148
Need 13 longs for jmp_buf; signal mask is 128 bits now.
...
XXX Actually, libc appears to use only 7 of the previous 10, so increasing
the size isn't actually necessary! But there was a gap at the end before,
so we'll keep it.
1998-09-14 21:31:52 +00:00
e30eafbbc6
Need 29 longs for jmp_buf now; signal mask is 128 bits.
1998-09-14 18:06:01 +00:00
d8ea31db0f
Improve initialisation of the Crazy Dots card. (Julian Coleman)
1998-09-14 14:25:38 +00:00
0a46abfd42
Collect redundant code into cpu_setup().
1998-09-14 10:37:12 +00:00
b1b69e4195
Fix cache bit confusion in pmap_alloc_cpu().
1998-09-14 09:46:11 +00:00
0b09668693
Fix typos in signal rework (sc.regs -> sc-regs, rege -> regs).
1998-09-14 07:04:06 +00:00
a4a356f9a6
Need 83 longs for a jmp_buf now.
1998-09-14 06:07:29 +00:00
27f3588d7b
oops, missed one.
1998-09-14 02:50:12 +00:00
cbfc257eda
sigset13_t -> int.
1998-09-14 02:48:33 +00:00
058853ee30
Use WARNS=1 to get -Wall, and properly disable -Wmain on gcc 2.8
1998-09-14 00:50:22 +00:00
7010f82942
Sync with "GENERIC".
1998-09-13 23:15:46 +00:00
43c45ee409
Enable gre(4) device
1998-09-13 21:02:02 +00:00
ff383dc20d
Add compat_13_machdep.c
1998-09-13 20:34:34 +00:00
190e4c429d
Move compat_13 sigreturn() into its own file.
1998-09-13 20:33:33 +00:00
82d2ea3a70
Remove left-over SUNOS_COMPAT line.
1998-09-13 20:24:15 +00:00
9658554e18
Replace previous by something more complete.
1998-09-13 20:17:54 +00:00
9d9f22fa79
Signal handling changes: sunos compat gets its own sendsig(); sunos
...
sigreturn() == compat_13_sigreturn().
1998-09-13 20:07:54 +00:00
52cbf86859
Looks like something else changed in signal land.
1998-09-13 16:45:43 +00:00
49af63b22b
Fixup signal changes (hopefully). However SUN_COMPAT is likely broken by
...
this and I don't know how to fix it.
We can now exec a 64-bit init through a really ugly hack (don't ask.)
1998-09-13 16:02:47 +00:00
06fb1b6d67
Fix pasto.
1998-09-13 12:24:18 +00:00
4e4f120db9
Update these for signal handling changes.
...
XXX Not tested yet.
1998-09-13 12:13:49 +00:00
7b15b3b56d
Minor change.
1998-09-13 12:01:41 +00:00
fa31b94af9
Fix omission in previous; remember to record that we're on the signal stack.
1998-09-13 11:57:58 +00:00
90054fd502
New sigcontext.
1998-09-13 11:41:02 +00:00
ba67f63901
Sync function prototypes; remove unsed variables.
1998-09-13 11:34:04 +00:00
ef7c8ebbe7
Oops; forgot to commit this.
1998-09-13 11:26:58 +00:00
b8de221a1e
Pull in <sys/syscall.h> directly into locore.s
1998-09-13 11:12:36 +00:00
4a797b8f45
Make signal delivery work again.
1998-09-13 10:29:02 +00:00
c7d391b23c
Make signal delivery work again.
1998-09-13 09:15:51 +00:00
1a5b3601cb
Make signal delivery work again.
1998-09-13 08:19:49 +00:00
35c106630e
__LIBCxx_SOURCE__ refers to the library major number, not the NetBSD release
...
number.
1998-09-13 02:18:38 +00:00
3ddf828326
Make signal delivery work again.
1998-09-13 01:51:29 +00:00
6351312ff7
Fix thinko in last thinko fix. We always have to store an old style
...
signal mask since a 1.3 binary may attempt to invoke sigreturn(2) directly
for an alternate exit from the signal handler. If we don't do this, it will
get a garbage signal mask if it tries to do that.
1998-09-13 01:45:04 +00:00
7f361cc70c
Prototypes for native_sigset13_to_sigset() and native_sigset_to_sigset13()
...
are in sys/signalvar.h
1998-09-13 01:43:17 +00:00
a0494141c5
Prototype for native_sigset13_to_sigset() is in sys/signalvar.h
1998-09-13 01:42:45 +00:00
875bff538c
A few slight optimizations.
1998-09-12 19:50:59 +00:00
ad0f4a6fbb
Nuke `insqeu' and `remque'
1998-09-12 19:46:00 +00:00
8b7ee2cd89
Add hatching code for other CPUs.
1998-09-12 19:44:17 +00:00
dfc0d8e7d5
{bzero, bcopy} -> {memset, memcpy}
...
add -DINSECURE to stand/Makefile.inc
1998-09-12 19:14:58 +00:00
e120fa4e14
Machinery to configure multiple CPUs. All CPUs found are spun up from the
...
auto-configuration cpu_attach() function using the firmware.
Currently, all CPUs except the one used to boot end up in an idle loop
in locore.
1998-09-12 15:33:40 +00:00
1b077ae1cd
Set cache control bits according to configured preference (if any).
1998-09-12 15:08:04 +00:00
0aa47cd025
Change cfs/CFS in symbols, strings and constants to coda/CODA
...
to avoid fs conflicts.
1998-09-12 15:05:47 +00:00
097a922a9c
Add field holding the physical address of the MMU context table.
1998-09-12 14:12:49 +00:00
f390eccd7d
Add missing bits to per-CPU MMU table allocator routine.
1998-09-12 14:11:53 +00:00
cd0a5fe245
Define some bit-format strings.
1998-09-12 13:59:19 +00:00
18fbdfc2f8
Expose `v3' routines to everyone.
1998-09-12 13:34:38 +00:00
3f2c7263b1
Fix thinko in previous.
1998-09-12 10:48:27 +00:00
2b636564b7
Don't add IOBase to sccA; it's an address, not an offset.
...
Pointed out by Paul Goyette.
1998-09-12 02:42:27 +00:00
89ea1fcbdd
Version sys_sigreturn, to avoid breaking programs that use it explicitly.
1998-09-12 00:47:12 +00:00
a4f0d3aef0
Add splx_end label to splx(), for stack traceback code.
1998-09-11 17:37:46 +00:00
008816ea4f
Changes to sys/arch/mips from ARC port, from Noriyuki Soda <soda@sra.co.jp>.
...
Adds (most) support for ARC platform to port-independent mips code.
Some changes (e.g., clean up of overlapping CPU/FPU ids) inspired by
comparison to the OpenBSD 2.1 codebase of Soda's ARC port.
Open issues:
* Still no support for r4600 or mipsIV CPUs with two-way L1 cache.
Code derived from Per Fogelstrom's OpenBSD source doesn't work
on mips3 pmaxes with L2 cache.
* Still some port-specific #ifdefs, for interrupt enable and
pmax L2 cache-size. Needs more thought, but overlaps with
work-in-progress by Tohru and Tsubai on spl()s and related stuff.
1998-09-11 16:46:31 +00:00
62ea009b0e
Update for signal handling changes.
1998-09-11 13:31:39 +00:00
a2d9c7ed82
Use the context flag bits.
1998-09-11 13:22:45 +00:00
fb526e055c
Substantial signal handling changes:
...
* Increase the size of sigset_t to accomodate 128 signals -- adding new
versions of sys_setprocmask(), sys_sigaction(), sys_sigpending() and
sys_sigsuspend() to handle the changed arguments.
* Abstract the guts of sys_sigaltstack(), sys_setprocmask(), sys_sigaction(),
sys_sigpending() and sys_sigsuspend() into separate functions, and call them
from all the emulations rather than hard-coding everything. (Avoids uses
the stackgap crap for these system calls.)
* Add a new flag (p_checksig) to indicate that a process may have signals
pending and userret() needs to do the full (slow) check.
* Eliminate SAS_ALTSTACK; it's exactly the inverse of SS_DISABLE.
* Correct emulation bugs with restoring SS_ONSTACK.
* Make the signal mask in the sigcontext always use the emulated mask format.
* Store signals internally in sigaction structures, rather than maintaining a
bunch of little sigsets for each SA_* bit.
* Keep track of where we put the signal trampoline, rather than figuring it out
in *_sendsig().
* Issue a warning when a non-emulated sigaction bit is observed.
* Add missing emulated signals, and a native SIGPWR (currently not used).
* Implement the `not reset when caught' semantics for relevant signals.
Note: Only code touched by the i386 port has been modified. Other ports and
emulations need to be updated.
1998-09-11 12:50:05 +00:00
932a812de4
Speed up syscall() slightly in a few cases.
1998-09-11 12:23:44 +00:00
526dbbab7e
Add labels for the compat_sparc32 signal trampoline and break -- er -- fix
...
suword and fuword.
1998-09-11 00:16:59 +00:00
6736de02e8
A (slightly modified) version of tv's fix for va_args for kern_printf.
1998-09-11 00:12:41 +00:00
97acdd4415
A minor error. kn5800, a MIPS SMP machine, was codenamed "ISIS."
1998-09-11 00:06:12 +00:00
f3ca996011
Add support for 64-bit types if _LP64 is defined.
1998-09-11 00:05:57 +00:00
cdeacb83c2
Don't use fuword()/suword() -- can't count on their size.
1998-09-11 00:04:16 +00:00
9d1c9d8d38
Use correct devices for zs driver on AVs. From Dave Huang (PR 6107).
1998-09-10 21:40:42 +00:00
f6b7ca884e
Use our brand new extent_alloc1() function to allocate cache-aligned
...
DVMA addresses.
1998-09-10 21:08:39 +00:00
283229c668
Fix catastrophic typo. DraCos rev. 3 (or older) would crash on exiting from
...
the first timer interupt.
1998-09-10 20:45:33 +00:00
d6afdbc88b
Complete to fix errors introduced by HX screen dimension detection.
1998-09-10 10:00:39 +00:00
84f15d23f4
Fix bug in switch_exit() from last commit. This fixes PR 6132.
...
The bug is that the modification to call exit2() removed a stack pop
but not the associated push.
1998-09-10 02:16:28 +00:00
eefa9491d1
Turn on support for 115,200 and 230,400 baud. Should work, but might
...
generate lots of interupts (one per char or so) if we don't have
DMA set up.
1998-09-09 20:58:06 +00:00
feb70ddafd
Add coda file system character file device.
1998-09-09 19:04:04 +00:00
6b6b9e2706
Make device probe/attach sessions to be executed at splhigh.
...
mha driver used interrupt driven I/O.
1998-09-09 16:42:51 +00:00
70e641047c
In cpu_coredump(), use MID_MACHINE rather than MID_* (whatever it expands
...
to).
1998-09-09 11:17:24 +00:00
2f9d1a8c8c
Use MID_MACHINE rather than MID_SPARC in cpu_coredump(), and add a comment
...
about dumping a SPARC32 core file if we're using emul_sparc32.
1998-09-09 11:06:08 +00:00
f7a4380174
If _LP64, set MID_MACHINE to MID_SPARC64, else MID_SPARC. This allows us
...
to uniquely identify ILP32 vs. LP64 core files, and prevents an LP64 kernel
from incorrectly choosing emul_netbsd when it should choose emul_sparc32.
1998-09-09 11:01:38 +00:00
2a6ae85fc3
Change to MACHINE_ARCH=sparc64 for LP64 machines.
1998-09-09 02:56:38 +00:00
d2570e248c
Don't use %tick for microtime on 32-bit kernels -- breaks gettimeofday.
1998-09-09 02:52:54 +00:00
e81ed2237d
Fix problems in global pagewalks.
1998-09-09 02:49:56 +00:00
9487c4be35
Make `machine phys' increment its address.
1998-09-09 02:48:15 +00:00
8abe0d6b1c
Adjust for the new "reaper" kernel thread: do not free the vmspace and
...
u-area in machine-dependent code. Instead, call exit2() to schedule
the reaper to free them for us, once it is safe to do so (i.e. we are
no longer running on the dead proc's vmspace and stack).
1998-09-09 00:07:48 +00:00
ba78af57df
Get ready to add Coda
1998-09-08 20:56:08 +00:00
cfa2e4dfa3
Activated options *_PAGER.
...
That was a careless mistake.
1998-09-08 15:43:27 +00:00
f157d15a41
Guard inclusion of opt_cputypes.h
1998-09-08 03:10:07 +00:00
b5e87ba833
Misc. cleanup.
1998-09-07 23:59:07 +00:00
4a42b68e25
Fixup for 32-bit and 64-bit syscalls.
1998-09-07 23:49:21 +00:00
caff762f80
Fix data corruption problem caused by broken debug code.
1998-09-07 23:48:23 +00:00
f162a39307
Make register32_t unsigned so we don't have sign extension problems.
1998-09-07 23:46:26 +00:00
07b0821d4d
Adapt to cpuvar.h changes.
1998-09-07 23:04:28 +00:00
b09b9f7339
De-couple the CPU info structure from auto-configuration structures.
1998-09-07 23:02:40 +00:00
729d765620
Clear up some type confusion.
1998-09-07 22:56:46 +00:00
064281122e
Add new 64-bit trap vectors.
1998-09-07 20:02:32 +00:00
2c412f42bb
scc_softCAR is a bit array, so set it accordingly for a serial console
...
port (instead of using the scc line number).
1998-09-07 19:54:15 +00:00
a91d61bced
Can't use fi->fi_base to access the resolution registers: it hasn't been
...
initialized yet. Use the base variable, and also use the symbolic symbols
to acdess the registers. Also, the console max_rows is based on the
display height, not the width.
1998-09-07 19:52:49 +00:00
3299eb8c5b
Fix error in kernel shadow mapping when kernel is loaded into fastmem on
...
69040/060 and the number of initial KPT pages is odd. This would cause
a memofy fault before the 040 trap routines were set up and gave a
misleading trap message. The odd number of KTP pages would result if
Sysptsize was patched, or if a large amount of Zorro3 space was needed.
1998-09-07 19:50:17 +00:00
8d72d0dc0a
Fix problems copying in extended syscall arguments.
1998-09-07 18:23:54 +00:00
074790dfb9
Make it usable.
1998-09-07 14:24:08 +00:00
334656f748
Cleanup _doboot, fixing the 040 reboot bug.
1998-09-07 14:14:34 +00:00
99517aa6c3
Reorganized the config files based on NetBSD/sparc ones.
...
Removed unmaintained files.
1998-09-07 14:11:08 +00:00
e21c0b3450
Need to cast sbus attach `prom_vaddrs' field.
1998-09-07 07:15:51 +00:00
c4c4e35608
Undo last change (we're passing the address of a pointer here).
1998-09-07 07:11:11 +00:00
c6a0c2d34c
Added more MIPS processor IDs.
1998-09-07 06:32:18 +00:00
aecf435d40
Add new 64-bit specific traps and 64-bit Solaris syscall.
1998-09-07 01:39:52 +00:00
edc4ed9846
32-bit fixup.
1998-09-06 21:53:41 +00:00
457395fe53
Use the new "%b" format.
1998-09-06 21:38:36 +00:00
c529fe0888
memerr() is now an indirect call.
1998-09-06 21:18:59 +00:00
cda6fb7430
Sanitize memerr*() a bit.
1998-09-06 21:14:56 +00:00
2db40814db
May as well check in my 64-bit kernel config file for the moment.
1998-09-06 04:43:47 +00:00
ce1a384fb1
Disable some debug stuff.
1998-09-06 04:42:08 +00:00
0c2564ec4a
Remove some unused variables.
1998-09-06 04:25:15 +00:00
f21d591227
Convert bzero() to memset().
1998-09-06 04:24:18 +00:00
f472d5f788
Include machine/intr.h.
1998-09-06 04:22:43 +00:00
249cdfe998
Convert b*() functions to mem*().
1998-09-06 04:20:37 +00:00
a3da712ec1
Add netbsd_sdboot and explain the differences between the kernels.
1998-09-06 03:38:56 +00:00
352fc12abe
Define BootConfig for EBSA285 kernels.
1998-09-06 03:11:38 +00:00
f275d29c4b
Implement a dummy version of pciide_machdep_compat_intr_establish()
...
for now.
1998-09-06 03:01:38 +00:00
3c2941eda0
Initial commit of PCI-ISA bridge device driver. This driver use the
...
PCI-ISA bridge callback mechanism to attach the ISA bus to the PCI=ISA
bridge.
This is basically an import of the i386 pcib.c code with very minor
changes.
1998-09-06 03:00:25 +00:00
722e17fbfe
Don't build depandancies for genassym.c as it no longer exists.
1998-09-06 02:41:19 +00:00
203b612984
Move UVM option to std.arm32
1998-09-06 02:37:47 +00:00
f3889623a7
Add USB device declarations.
1998-09-06 02:35:22 +00:00
9968946f1e
Added USB devices.
...
Added fcom serial device.
1998-09-06 02:33:56 +00:00
896041468d
Initial commit of config file for EBSA285 architecture boards.
1998-09-06 02:30:52 +00:00
928d54f699
Added Footbridge (DC21285) files, PCI and USB.
1998-09-06 02:28:58 +00:00
71150c9734
Initial commit of board support for DEC/Intel EBSA285 architecture
...
systems include the Chalice CATS board and others running the cyclone
firmware.
1998-09-06 02:23:36 +00:00
0823f75d49
Initial commit of DC21285 'Footbridge' core logic support for the
...
StrongARM SA110 processor
The DC21285 provides memory controller, timers, interrupt controller
PCI-HOST bridge and diagnostic serial port.
1998-09-06 02:20:33 +00:00
a112a2a4cc
It slices. It dices. It does everything except exec a sparc32_compat init.
1998-09-05 23:57:24 +00:00
484ce04810
The `address' field from the prom is really an unsigned 32-bit value.
...
Make it so.
1998-09-05 22:29:49 +00:00
5dc93bd9fe
Remove function naming conflict.
1998-09-05 22:15:51 +00:00
1fd18c6ecf
Define is_draco() inlined.
...
Corresponds to removal of this function in autoconf.c 1.61.
1998-09-05 21:10:55 +00:00
315ac1f6f7
These are replaced by drivers in <sys/dev/sbus>.
1998-09-05 17:46:33 +00:00
5b005d9e2a
Use auto-generated `dev_name2blk[]'.
1998-09-05 17:43:18 +00:00
989caecc31
Define a few major devices.
...
Remove `dma' and `esp' definitions.
1998-09-05 17:42:28 +00:00
037ab5af1a
#include <sys/dev/sbus/sbusvar.h>
1998-09-05 16:52:02 +00:00
c20e88b71e
#include <dev/sbus/sbusvar.h>
1998-09-05 16:50:37 +00:00
2a85575583
Most of this now comes from <sys/dev/sbus/sbusvar.h>
1998-09-05 16:44:39 +00:00
181a8253a0
Nuke temporary `getpropA()'.
1998-09-05 16:23:08 +00:00
eebaae2ec0
Remove unused files.
1998-09-05 16:06:23 +00:00
b8fbf12db9
Remove unused devices.
1998-09-05 16:01:11 +00:00
5ca09ab5b1
Remove unused files.
1998-09-05 16:00:42 +00:00
b39d7e33be
Assign my copyrights to TNF.
1998-09-05 15:42:41 +00:00
2a1639d335
Relinquish my copyright claims on this file.
1998-09-05 15:31:42 +00:00
8a30c7eaef
Assign my copyrights to TNF.
1998-09-05 15:30:24 +00:00
29bae173fa
Relinquish my copyright claims on this file.
1998-09-05 15:29:35 +00:00
50909bd6d9
Assign copyright to TNF.
1998-09-05 15:28:08 +00:00
c2b3e6490b
Assign my copyrights to TNF.
1998-09-05 15:28:07 +00:00
2d876282c2
Assign copyright to TNF.
1998-09-05 15:28:06 +00:00
a51c63c933
Assign my copyrights to TNF.
1998-09-05 15:28:06 +00:00
449820f2ea
Assign copyright to TNF.
1998-09-05 15:28:04 +00:00
7c5210bcab
Assign my copyrights to TNF.
1998-09-05 15:20:47 +00:00
7e976967d2
Relinquish my copyright claims on this file.
1998-09-05 15:15:35 +00:00
c9db84ecc9
distclean is a synonym for cleandir
1998-09-05 15:15:14 +00:00
acf16f7096
Assign my copyrights to TNF.
1998-09-05 15:11:22 +00:00
2c9a80baf4
Assign my copyrights to TNF.
1998-09-05 14:01:08 +00:00
5ebcb31dd0
Assign my copyrights to TNF.
1998-09-05 13:45:46 +00:00
8adc8da66b
Assign my copyright to TNF.
1998-09-05 13:40:35 +00:00
a3d9c9bd87
- Clearify what ioasic_init() is for. No runtime difference because
...
NetBSD/pmax does not fully utilize the hardware features.
1998-09-05 05:54:15 +00:00
f887061852
Disable recent additions, which are gratuitously annoying and *crash my
...
machine* at boot time (with a divide by 0 fault).
1998-09-05 04:54:23 +00:00
646b4ca78b
Declare boot_file.
1998-09-05 04:14:21 +00:00
368fcbd069
- Remove lines make not effects from mainbus.c
...
- Remove direct device driver calls from dec_3100.c. Close PR#5522.
1998-09-05 04:11:04 +00:00
4285910912
Implement faster method of blocking all lower priority interrupts.
...
Modify current_spl_level to reflect the temporary change in interrupt
priority level which dispatching.
Don't increment the interrupt stats for every handler in the interrupt chain.
Cleaned up a number of comments.
Define soft interrupt names.
A few miscellaneous tidy ups.
1998-09-05 04:05:31 +00:00
de5eac54ea
Simplified initialisation of irqmasks.
...
Removed any remnants of soft interrupt dispatching.
Cleaned up a number of comments.
Removed a number of blank lines.
Nuked register keywords.
Made sure code is in sync with interrupt handling for other ARM hardware.
1998-09-05 04:04:24 +00:00
451f011ac6
Always call dosoftints() for both lowerspl() and splx().
...
Fix several comments.
1998-09-05 04:01:53 +00:00
3a115108ed
Nuke register keywords.
...
Update set_spl_masks() to reflect the _SPL_SOFT* macros.
Initialise the soft interrupt mask array.
Update dump_spl_masks() to dump all the hardware and software spl masks.
1998-09-05 04:00:30 +00:00
900bbc08fc
Soft interrupt dispatching now uses the soft_interrupts variable along
...
with the spl_smasks array and the current_spl_level variable to work
out which soft interrupts are pending.
This means that soft interrupts are now separated from the hardware
interrupts so a full 32 hardware and 32 software interrupts can now be
supported.
Implement clearsoftintr() function.
Define several macros to make the soft interrupt dispatching code cleaner.
Implement setsoftserial() function.
Implement soft serial interrupt dispatching.
1998-09-05 03:59:29 +00:00
867fa9eb68
If boot_file is defined try using it to determine the boot device.
...
Update printing of irqmasks for IPL_SERIAL.
1998-09-05 03:58:31 +00:00
08c24a03e4
Cleanup and simplify interrupt number definitions for various architectures.
...
Remove all soft interrupt definitions now soft interrupts are being
separated from hardware ones.
Reserved interrupts do not have any special uses so only define then if
needed as placeholders.
1998-09-05 03:51:01 +00:00
6edf348e6d
Define _SPL_SOFT{CLOCK,NET,SERIAL} and create or update the
...
appropriate spl* macros.
Move spllpt() maro here from intr.h
Prototype setsoftserial().
Define spl_smasks array for software interrupt masks to complement the
hardware interrupt masks.
1998-09-05 03:50:01 +00:00
4d98d58935
Define IPL_SERIAL & IPL_HIGH.
...
Define SOFTIRQ_CLOCK, SOFTIRQ_NET and SOFTIRQ_SERIAL and SOFTIRQ_BIT()
macros.
Move spltty macro to psl.h
1998-09-05 03:47:10 +00:00
d9753cd7d0
Install joystick.h.
1998-09-05 03:32:57 +00:00
dc0d1c09d5
Add joy at ofisa.
1998-09-05 03:32:36 +00:00
5ae7ff7e6e
Added assembly code for set_region_2.
...
Rewritten/Optimised a number of the bus space functions.
1998-09-05 01:31:53 +00:00
1a6733681f
Add set_region_2 to ISA IO and MEM tags.
...
KNF.
1998-09-05 01:30:02 +00:00
46f166f090
Cleaned up the map_entry*() functions.
...
Removed register keywords.
Tidied up printf format strings.
Removed a number of blank lines.
1998-09-05 01:23:04 +00:00
a21a7644df
Rip out a load of junk thats long past its "best before" date.
1998-09-05 01:18:19 +00:00
ec1dae5a9d
Only build modedefs.c if MONITOR is defined.
1998-09-05 01:16:17 +00:00
9ad228e3bc
Update MINIROOTSIZE option.
1998-09-05 01:14:43 +00:00
7115a4f53e
Updated several comments and acknowledgements.
1998-09-05 01:12:14 +00:00
218bf90f49
Nuke register keywords.
1998-09-05 01:09:42 +00:00
e6aee6549e
Updated for recent driver additions and reservations.
1998-09-05 01:06:38 +00:00
3a01450f20
Bring up to date.
1998-09-05 01:04:48 +00:00
0eb25ce882
Add support for Apollo-68060-board-reworked A3000 motherboards.
...
This is only tested on the original A3000...
1998-09-04 22:00:27 +00:00
a99b5503f1
Account for the 68060 store buffer.
1998-09-04 21:19:07 +00:00
bd83774fb0
Switch to UVM on macppc.
1998-09-03 15:11:52 +00:00
2eacfa5148
Deleted unused options EIOMAPSIZE and ITEKANJI.
...
Removed unmaintained configs.
1998-09-03 14:29:33 +00:00
2b34aa908f
Eliminated meaningless ITEKANJI.
1998-09-03 14:22:06 +00:00
8749f59fe4
Unimplemented EIOMAPSIZE defaults to 0.
1998-09-03 14:13:18 +00:00
a647a97b1a
Remove HTABENTS definition. (calculated automatically)
1998-09-03 14:10:56 +00:00
99c8212d10
Change void mcintr() to int mcintr().
1998-09-03 14:06:06 +00:00
f8aa472811
* Remove nam2blk.
...
* Clean up a bit.
1998-09-03 13:18:44 +00:00
ef1837c1ad
Fix typo in previous (!UVM case, hence insignificant).
1998-09-03 12:38:31 +00:00
ff9b85d338
cdevsw[] and chrtoblktbl[] arrays were not in sync. Add missing the
...
two entries in chrtoblktbl[] as pointed out by Greg Oster PR#5715.
1998-09-03 07:12:43 +00:00
e71752d621
An include file describes MIPS processor hardware nature, which will
...
supercedes cpuregs.h eventually.
1998-09-03 05:09:37 +00:00
323528d86f
Integrate another one of Neil Carson's pmap improvements.
...
Use pmap_clean_page() in pmap_remove_all() to improve cache cleaning
efficiency.
1998-09-03 03:31:53 +00:00
9b0803da20
Use UVM by default.
1998-09-03 01:43:34 +00:00
c38a877ead
Add bus_space_read_region_1/bus_space_write_region_1 to the Amiga bus.h.
1998-09-02 23:00:04 +00:00
a3ee69c87a
Split SMC chipset ARCnet driver into
...
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
0f9ab462ab
std.pc532: default to UVM and PMAP_NEW.
...
DUMMY, KLONDIKE: Update to my current config.
INSTALL: Use -O1 to save space.
1998-09-02 19:22:13 +00:00
59def94d93
Get rid of vm_offset_t/vm_size_t. Resolve conflicts in pmap.new.[ch] after
...
last import from port-i386.
1998-09-02 19:17:12 +00:00
fcfae9e5df
Get rid of vm_offset_t/vm_size_t
1998-09-02 14:58:01 +00:00
77e8bc0d0f
really turn UVM on on the atari...
1998-09-02 14:28:58 +00:00
0d5cf1f723
mv vmebus -> avmebus to make room for MI vmebus implementation (per
...
reqest of Drochner).
1998-09-02 11:23:41 +00:00
a27ab73aae
Nuke vm_offset_t/vm_size_t.
1998-09-02 11:16:31 +00:00
a3b886d834
Reorganize installation if include files. Nuke some from atari/include as
...
they make no sense out of the kernel add some from atari/dev (ioctl's).
1998-09-02 10:59:14 +00:00
06ea852ae8
take out UVM_PAGE_TRKOWN and comment UVMHIST
1998-09-02 10:27:27 +00:00
5e4c58a7d0
Fix incomplete variable renaming in the last commit.
...
Found by taca@sky.yamashina.kyoto.jp (Takahiro Kambe) - PR port-i386/6087.
1998-09-02 08:24:51 +00:00
78aedb2cd3
- kernel boot flag 'd' now means "enter DDB asap" like as other ports.
...
- bump cpu_model[] length as the longest name occupies over 30 characters.
- place machine_arch[] beside machine[] for clearity.
- nuke useless #include directives.
- small scale cleanup in vm_machdep.c
1998-09-02 06:41:22 +00:00
cf9a8a5a53
Periodic update: now starts probing devices.
1998-09-02 05:51:35 +00:00
38cae9f204
Replace TAB just after the keyword `options' with SPACE.
1998-09-02 02:02:33 +00:00
8bbc38a130
avail mem is calculated ptoa(uvmexp.free), not ptoa(uvmexp.free - bufpages),
...
like on other ports. uvmexp.free is already adjusted by the uvm_pagealloc
calls used to get the buffer pages. (reported by mrg)
1998-09-02 00:03:05 +00:00
1df7dffd26
Nuke an unused variable.
1998-09-01 21:28:04 +00:00
899f8f8851
Fix off-by-one errors in assertion in DIAGNOSTIC in pmap_remove()
1998-09-01 20:30:20 +00:00
3e5ec30a8f
Use subdirs.
1998-09-01 20:18:37 +00:00
b5f246a8ca
Changed algorightm to figure out boot device.
...
Use type of SCSI interface, target SCSI ID and LUN,
passed from the boot loader.
1998-09-01 20:08:21 +00:00
f9175d6bc7
NetBSD/x68k boot loader. The xxboot now can boot NetBSD from
...
1. >1GB SCSI disks,
2. any of the top 7 partitions on disks, and
3. any SCSI interface.
1998-09-01 20:02:32 +00:00
ecc30b1784
New boot program.
...
Load and execute NetBSD/x68k kernel from Human68k.
1998-09-01 19:55:32 +00:00
8f7b16dd71
X680x0 IOCS library.
1998-09-01 19:53:54 +00:00
f67f070984
Human68k DOS library.
1998-09-01 19:53:25 +00:00
16964edb07
The files are moved to stand/xxboot/gunzip/.
1998-09-01 19:52:48 +00:00
bfd67e9c16
Files used in common.
1998-09-01 19:51:56 +00:00
19f52a192c
New utility program.
...
Convert a.out to Human68k ".x" format executable.
1998-09-01 19:51:07 +00:00
330356bc46
The files are moved to stand/xxboot/.
1998-09-01 19:49:33 +00:00
b8e89a2507
Removed unused files.
1998-09-01 19:48:00 +00:00
1bf1486a77
Added an include file on port dependent boot information.
1998-09-01 19:47:38 +00:00
62f989f832
Removed unused files.
1998-09-01 19:44:14 +00:00
30b5826331
Hang on to `old VM' a little while longer..
1998-09-01 18:05:27 +00:00
8159431e7e
Make disklabel writable even if no disklabel exists.
1998-09-01 17:42:59 +00:00
2c6eefb899
Add some prototypes.
1998-09-01 17:33:04 +00:00
3a8ad815c4
Add some prototypes.
1998-09-01 16:35:50 +00:00
e97803df25
Typo.
1998-09-01 15:05:21 +00:00
d5a3d4b4b7
Don't set RTC time before reading it.
1998-09-01 13:07:23 +00:00
64b0761e4d
Include bsd.subdir.mk instead of bsd.prog.mk.
1998-09-01 08:43:48 +00:00
67d65cd631
Sync with i386/include/bus.h.
1998-09-01 05:57:23 +00:00
0bbf57d7ec
Eliminate ovbcopy define.
1998-09-01 05:55:14 +00:00
7a359022d9
Re-enable mfc and msc serial drivers. Both compile, but only mfc is
...
currently known to work [I can't test the msc changes].
Add commented-out UVM option (until UVM is standard).
1998-09-01 02:40:36 +00:00
1d7e0301d3
Quick fix for TS_WOPEN -> t_wopen change. Compiles, but I can't verify
...
that it actually works again.
1998-09-01 02:33:32 +00:00
b741e97082
Quick fix for TS_WOPEN -> t_wopen change. Compiles and works.
1998-09-01 02:30:29 +00:00
0c11c52fc1
Added csc device.
1998-09-01 02:28:04 +00:00
1c13966ceb
Add csc device and scsibus attachment.
1998-09-01 02:27:21 +00:00
edb737d09d
Initial commit of a Cumana SCSI II driver using the sfas chip driver.
1998-09-01 02:24:11 +00:00
478a07de87
generate dependancies from genassym.cf
1998-09-01 01:48:21 +00:00
663e79e90a
add 32-bit register support and beginnings of APM V1.2 support
1998-08-31 23:54:32 +00:00
6ab2c0f7d4
config file for BIOSCALL assym.h
1998-08-31 23:53:30 +00:00
a5026bf4e2
regen
1998-08-31 23:52:58 +00:00
10ec6359b5
add 32-bit register support to BIOSCALL interface
1998-08-31 23:52:40 +00:00
d58173741d
kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
...
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
e07f44da4d
Fixed typo in printf bitfields for intrstat register.
1998-08-31 21:21:10 +00:00
779f357ede
Implement cache alignment in bus_dmamem_load().
1998-08-31 20:00:22 +00:00
58831dae59
Bug fixes and improvements. By Roar Thronæs and myself.
1998-08-31 19:20:24 +00:00
56c79255db
Fix typo: dbaddr_t -> db_addr_t.
1998-08-31 19:20:17 +00:00
25f04a8abb
Support for all 4 console lines on KA820. Support for this written
...
by Sergey Svishchev (svs@ropnet.ru ).
1998-08-31 18:43:28 +00:00
29a84ea0ac
UVM+PMAP_NEW is standard now; don't need it in individual config files.
1998-08-31 17:58:44 +00:00
4e705c4d21
Switch the i386 port to UVM+PMAP_NEW.
1998-08-31 17:55:26 +00:00
b9a44d6b63
vm_offset_t --> [pv]addr_t
1998-08-31 14:43:39 +00:00
378fc0778a
Change db_expr_t from int to long like other ports.
1998-08-31 14:16:48 +00:00
1fe0874746
use genassym.sh/.cf rather then the C program.
1998-08-31 06:52:18 +00:00
667635aebb
Add (commented out for now) UVM/PMAP_NEW, enable KMEMSTATS, comment
...
out the PHY drivers.
1998-08-31 03:54:33 +00:00
0e533ae4c7
Use IPL_AUDIO for the interrupt priority.
...
KNF.
1998-08-31 02:36:11 +00:00
bd75906989
Use IPL_AUDIO for the interrupt priority.
...
Cleaned up some comments and removed several un-necessary includes.
1998-08-31 02:35:31 +00:00
47364b0c91
Use IPL_AUDIO for the interrupt priority.
1998-08-31 02:34:36 +00:00
cdaa8d9c45
Further improvements to init_arm(). Use map_chunk() to map a number of
...
areas of the kernel including the text, data and bss.
1998-08-31 00:11:18 +00:00
80d8aa6034
Remove a couple of redundant lines.
1998-08-31 00:08:11 +00:00
5fa7eee1ff
don't define __BUS_SPACE_COMPAT_OLDDEFS by default. As stated in
...
bus_space(9), if drivers want it (they shouldn't; easy to convert) they
can define it right before including bus.h. There's been a release since
the interfaces were (slightly) changed, and no code in the source tree
uses the old interfaces as far as I can tell.
1998-08-30 23:40:14 +00:00
3110e22945
use current bus_space interface names for barrier ops
1998-08-30 23:29:10 +00:00
c4ae202098
Further improvements to init_arm(). Use map_chunk() to map a number of
...
areas of the kernel include the text, data and bss.
1998-08-30 23:19:37 +00:00
45faa60d85
Added a new function map_chunk() used during init_arm() when setting up
...
the kernel page tables. map_chunk() replaces running a loop, calling
map_entry() and in addition where possible it will use L1 section mappings
or L2 large page mappings instead of L2 small page mappings in order to
reduce the TLB entried needed for the kernel.
1998-08-30 23:17:44 +00:00
82661d453d
Define new PTE construction macros for L2 large small pages and L1
...
sections and define some of the other macros using the new ones.
Add more comments for various definitions in the file.
1998-08-30 23:15:14 +00:00
4dbdab4423
Erase sparc_nam2blk[].
1998-08-30 21:54:25 +00:00
88ab783b42
Define floppy device major number.
1998-08-30 21:53:35 +00:00
fc313d9031
Nuke old getprop() function and put its successor in place.
1998-08-30 21:30:41 +00:00
400208c8b7
getpropA() => getprop()
1998-08-30 21:27:32 +00:00
6f2539f8a6
getpropA() => getprop().
1998-08-30 21:26:46 +00:00
26d2d906c7
Some more 64-bit cleanup. Now everything compiles.
1998-08-30 15:32:16 +00:00
cdf68a7fa3
a minor hack i've had locally for ages: if PCVT_CAPS_IS_CTRL is
...
defined, make the capslock key act like another control key.
1998-08-30 09:59:47 +00:00
acbd410040
Some more 64-bit ification and I think I finally fixed the vref() panic.
1998-08-30 02:12:02 +00:00
fe6b9295a8
Adjust for some small changes in lsi64854 back-end driver.
1998-08-29 21:43:00 +00:00
0a30d383a0
Sbus `esp' and `le' front-ends now attach in `sys/dev/sbus/files.sbus'.
1998-08-29 20:53:11 +00:00
e4091cb757
Split `esp' driver and DMA engine into separate front-end files.
...
The Sbus front-ends have all been moved to `sys/dev/sbus', while
the `obio' front-ends remain here.
1998-08-29 20:49:35 +00:00
1f0567dd53
Nuke unnecessary header files.
1998-08-29 20:38:38 +00:00
d581aadc3e
Some more 64-bit-ification.
1998-08-29 18:16:56 +00:00
08528c6bd2
remove unnecessary "extern int ncpus" (was also causing egcs warning)
1998-08-29 16:24:25 +00:00
892ab683dc
minor minor KNF nit.
1998-08-29 16:24:03 +00:00
06a7946b7d
register -> int or nothing & egcs warnings cleanup.
1998-08-29 16:21:20 +00:00
ac9132322e
minor minor KNF nit.
1998-08-29 16:16:37 +00:00
af81b233e1
remove unnecessary "extern int tickadj" (was also causing egcs warning)
1998-08-29 16:15:53 +00:00
6b1d637705
add "int" type to interrupt handler typedefs (egcs warning)
1998-08-29 16:15:11 +00:00
3d26a04acb
add "int" type to static tzops array (egcs warning)
1998-08-29 16:14:15 +00:00
ba1bba6844
register -> int (also fixes egcs warning). minor KNF nit.
1998-08-29 16:13:33 +00:00
ed88a6f103
add support for finding kernels other than `netbsd'. the list is:
...
netbsd, netbsd.gz, netbsd.old, netbsd.old.gz, onetbsd, onetbsd.gz
and vmunix, in that order. this is used by the bootable `bootfs'
image (suitable for floppies and cdroms), which contains a netbsd.gz
by default.
while i'm here, fix up `boot [device] -s' which got broke when
booting kernels with a - in their name was fixed..
1998-08-29 06:40:43 +00:00
eff784066e
Don't discard the proc0_pt_pte mapping and make sure that the
...
proc0_pt_pte and proc_pagedir mappings are uncached.
1998-08-29 04:58:16 +00:00
4a241e1fbd
Change KERNEL_BASE to VM_MIN_KERNEL_ADDRESS.
1998-08-29 04:08:12 +00:00
9eb28e934b
Include sys/types.h instead of sys/param.h
...
Junk some un-needed includes and include cpu.h.
1998-08-29 04:05:44 +00:00
ae7526d965
Removed some un-necessary includes.
1998-08-29 04:01:58 +00:00
c611af7c7f
Change boot_path to boot_file and initialise to NULL along with boot_args.
1998-08-29 03:57:03 +00:00
5898385f6b
Change boot_path -> boot_file and initialise to NULL along with boot_args.
1998-08-29 03:55:57 +00:00
4ad81305d5
Initialise boot_args and boot_file to NULL.
1998-08-29 03:53:17 +00:00
80b4f63e42
Updated for some reserved majors.
1998-08-29 03:28:17 +00:00
af5eba9861
Implement address validation as a separate function db_validate_address().
...
Use this function to validate the page table entries for all reads and
writes.
1998-08-29 03:21:33 +00:00
3e217a0157
Remove the definition of CURRENT_PAGEDIR_HOLE and CURRENT_PAGEDIR_BASE
...
as they are no longer reference.
Move ALT_PAGE_TBLS_BASE from 0xf3c00000 to 0xf0c00000.
Increase the size of the KERNEL_VM_SIZE by 16MB now that 0xf3xxxxxx is free.
1998-08-29 03:19:55 +00:00
22a3c54923
Use KERNEL_VM_SIZE to calculate the number of page tables needed for
...
the kernel data area.
Don't map the proc0 L1 page table into the L2 page tables space.
1998-08-29 03:17:27 +00:00
99bb4b6b6b
Rewritten pmap_pte() not to use the mapping of the L1 page table within
...
the L2 pages tables (CURRENT_PAGEDIR_HOLE).
Don't map the L1 page table into the L2 page table space any more (easy
reference hack) in pmap_allocpagedir().
1998-08-29 03:14:14 +00:00
66074cf792
Use VM_MAX_KERNEL_BUF only to limit nbuf and not bufpages.
1998-08-29 03:09:14 +00:00
12107a5187
Updated many of the pmap files to use current versions from the
...
mvme68k port. The next68k port now uses MACHINE_NEW_NONCONTIG.
1998-08-28 23:05:53 +00:00
abbb6f13e3
Added some machine probing information to console printouts.
1998-08-28 22:56:08 +00:00
fa906c926a
added a flag to disable the NEXT_SLOT_ID_BMAP for testing the turbo machines
1998-08-28 22:53:47 +00:00
a96195b5fd
added -Wno-main if USE_EGCS is defined
1998-08-28 22:50:54 +00:00
a538dbbf21
Moved initialization of vbr, and removed default machine configuration
...
varaiables to debug probing on the turbo machines.
1998-08-28 22:47:12 +00:00
4b7b605d84
Use the "nointr" pool page allocator for pmap_pmap_pool.
1998-08-28 22:22:48 +00:00
d1f73558ff
Use the "nointr" pool page allocator for pmap_pmap_pool.
1998-08-28 21:58:29 +00:00
8e0c62893c
Remove cache flush from dma_espintr(); the bus dma routines take care
...
of that now. Hence we no longer need <sparc/cpuvar.h>.
1998-08-28 20:14:36 +00:00
ca868d7da6
Specify our boundary restriction when allocating DMAble memory.
1998-08-28 20:07:52 +00:00
808c0cca58
Fix bug with zeroing kernel page tables that I introduced yesterday.
1998-08-28 20:04:35 +00:00
221a000391
Pass on bus_dma*() aligment and boundary arguments.
1998-08-28 20:02:19 +00:00
f369f261d1
Fix a debug printf.
1998-08-28 19:22:50 +00:00
1cb7a16aed
Fix typo. The page table allocation loop in initarm() should be
...
<= NUM_KERNEL_PTS rather than < NUM_KERNEL_PTS.
1998-08-28 17:15:45 +00:00
f6a208ce6b
Nuke Dprintf; fix formats.
1998-08-28 08:57:38 +00:00
70b6acd9df
Use NFS_BOOT_BOOTPARAMS until we change the boot program to use DHCP
1998-08-28 04:56:15 +00:00
25ae95328f
Use kernel_pmap->pm_pdir instead of PAGE_DIRS_BASE when mapping podule
...
space.
1998-08-28 03:19:34 +00:00
17dcbf485c
More reworking in initarm().
...
Further cleanup and simply the allocation and mapping of the kernel
pagetables and static data pages.
Removed the page directory page table as it is no longer necessary.
Changed the allocation of the proc0 L1 page table and L2 page table
that maps the page tables to map these pages into kernel virtual
address space.
Updated for pv_addr_t argument changes to pmap_bootstrap().
1998-08-28 02:58:41 +00:00
133f5c93f0
Updated for pmap_bootstrap() argument change. Modify ofw_configmem()
...
to obtains pv_addr_t structures for the proc0 L1 page table and the proc0
pagetable that maps page tables.
Use the virtual address from the pv_addr_t structure for the proc0 L1 page
table when calling pmap_bootstrap rather than relying on a special mapping
at PAGE_DIRS_BASE.
Modify ofw_construct_proc0_addrspace() for similar changes to
ofw_configmem().
Remove the kernel_pde page table in ofw_construct_proc0_addrspace() as it
it now longer needed.
1998-08-28 02:52:37 +00:00
1ca0ef8cae
Modify the arguments to pmap_bootstrap() to take a pv_addr_t structure
...
for the page table to map kernel pagetables (kernel_ptpt). This means
that the pm_vptpt field is now valid for the kernel_pmap.
Use constants from vmparam.h in pmap_allocpagedir().
1998-08-28 02:46:51 +00:00
7e95972ed1
Add `audiocs' ("SUNW,CS4231") and `en' ("ENI-155s").
1998-08-27 20:56:44 +00:00
6baebf57c6
Nuke egcs warns: void main(), implicit int
1998-08-27 12:20:51 +00:00
713a7dc9c3
oops, remove old isp attachment here..
1998-08-27 11:47:12 +00:00
396330e186
remove sparc64 "options BUS_DMA" -- it is now standard
1998-08-27 11:43:14 +00:00
82571f5403
move isp sbus attachment to dev/sbus
1998-08-27 11:41:24 +00:00
bd85d62257
move isp sbus attachment to dev/sbus and support it on the sparc64
1998-08-27 11:40:06 +00:00
f8a4876874
Add on-board video information for the LC III, and a guess
...
at the LC II based on similar machines mentioned in the dev note.
1998-08-27 07:31:34 +00:00
a465fdedc6
Add 64-bit pmap support:
...
Moved from a two level 512/1024 entry setup mapping 32 (9/10/13) bits
respectively to a three level 1024/1024/1024 entry setup mapping 43
(10/10/10/13) bits. In 32-bit mode we waste about 1/12 pages mapping the high
11 bits. We also only manage 43 of the possible 44 bits of virtual address
space, wasting half of it. Oh well, maybe we'll do better next revision.
1998-08-27 06:23:31 +00:00
c5695ed630
Centralize the definition of pv_addr_t to pmap.h
1998-08-27 04:00:53 +00:00
af91a82f1e
Remove pv_addr_t and systempage declarations.
1998-08-27 03:58:10 +00:00
e7a61c9984
Centralise the definition of the pv_addr_t structure.
1998-08-27 03:55:06 +00:00
7308faf67b
"COMPAT_11 + COMPAT_12 + COMPAT_13" doesn't work - these are based on
...
definition, not 1 or 0. Also, since all pre-1.4 releases require
COMPAT_13 (not just 1.3 binaries), just "#ifdef COMPAT_13".
1998-08-26 14:51:57 +00:00
df94d3f4f5
Add AdvanSys SCSI controller
1998-08-26 14:27:44 +00:00
c5b4ddc051
Add more opl attachments.
1998-08-26 13:37:49 +00:00
a40fb261e6
deal with no DDB
1998-08-26 12:41:47 +00:00
446bcd99d6
panicstack: is needed outside of DEBUG. use _C_LABEL, and printf not db_printf (incase no ddb!)
1998-08-26 12:37:35 +00:00
9deb19798f
Add OPL driver.
1998-08-26 12:10:57 +00:00
a890d2dd7f
Add MD DELAY and spl routines to fit Nisimura's change.
1998-08-26 12:07:21 +00:00
1c3e72cd0e
Back out previous change.
1998-08-26 11:44:06 +00:00
8912df90bf
fix missed sparc -> sparc64
1998-08-26 10:36:42 +00:00
e791891d53
- use UVM by default.
...
- clean up the Makefile a bit to be less solaris-centric :)
- add support for compat_sparc32 (32bit compat module for NetBSD/sparc). this
isn't yet fully tested but it mostly written and compiles if not totally
links yet.
1998-08-26 10:31:36 +00:00
76567c8213
Remove ad1848 attribute; it's in conf/files now.
...
(Why don't we remove the XXX hack in this file?)
1998-08-26 09:32:24 +00:00
8ea67882ab
make this actually work
1998-08-26 09:09:31 +00:00
be25ea2fb5
put pmapdebug usage inside #ifdef DEBUG
1998-08-26 07:55:10 +00:00
4fa399d4db
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-26 04:54:17 +00:00
7cfa6e0972
Always use pmap_kremove() if removing a mapping from the kernel pmap.
1998-08-25 23:09:08 +00:00
47e470f2af
Use UVM as standard.
1998-08-25 22:07:46 +00:00
34f8ef18c9
Updated for changes to some of the constants defined in vmparam.h
...
Simplified serveral parts of the initarm() to make the code clearer and
modified parts of initarm() as part of an on-going effort to abstract
out part of initarm() on various machines.
1998-08-25 22:03:07 +00:00
61bd706797
Include machine/vmparam.h
1998-08-25 21:56:14 +00:00
bd14bb41f0
Define KERNEL_PD_SIZE in terms of various constants defined in vmparam.h
1998-08-25 21:55:06 +00:00
cda0e37703
Collect various kernel constants together and define them in all one
...
place (some moved from param.h)
Define several constants such as page table addresses in terms of other
constants.
Increase some of the limits :
MAXTSIZ 8MB -> 16MB
DFLDSIZ 16MB -> 128MB
MAXDSIZ 256MB -> 512MB
DFLSSIZ 512KB -> 2MB
1998-08-25 21:53:37 +00:00
4e8239cdca
Removed a number of kernel constants as they have moved to vmparam.h
1998-08-25 21:50:54 +00:00
b42b94b608
Shave yet more translation ops from the inner loops of pmap_protect().
1998-08-25 18:21:17 +00:00
218681f3e5
Kernel stach should be 4K, not 32K. Increase MCLSHIFT to 11.
...
Remove ovbcopy().
1998-08-25 17:35:23 +00:00
fb5e3aef9b
For the pc532 MACHINE (pc532) isn't equal to MACHINE_ARCH (ns32k) but there
...
is no sys/arch/ns32k.
1998-08-25 11:52:26 +00:00
2fa5652849
Break the code that cleans out page tables from pmap_remove_mapping() into
...
separate functions that perform the cleanout starting at the l3pt, l2pt,
or l1pt.
1998-08-25 09:00:19 +00:00
af5a3e52a5
yanko
1998-08-25 08:28:53 +00:00
33caa59da3
Optimize the pmap_protect() loop. Will make a similar change to pmap_remove()
...
once some changes are made to how pt pages are cleaned up.
1998-08-25 08:00:15 +00:00
b7fb6e1711
Change pmap_changebit() to take a mask of bits to set, and a PTE mask,
...
shaving several instructions out of the inner loop.
1998-08-25 06:21:16 +00:00
daa8ad1747
Add some braces to make egcs happy.
1998-08-25 04:56:01 +00:00
2d981dac3b
The return value from intr_dispatch() is no longer necessary.
1998-08-25 04:03:56 +00:00
2aa56b1c61
Implement splaudio().
1998-08-25 03:59:01 +00:00
f920e4e2d6
In physconinit(), don't use printf() to clear the screen but call
...
the console's putstring function directly.
1998-08-25 03:26:36 +00:00
b75234f009
Add calls to cpu_cache_cleanID() after calling setttb() during initarm().
...
This is necessary as the memory addresses being used for the cache clean
(if the CPU is a SA110) may have been remapped by the setttb() call and
thus the cache could loose sync with memory.
1998-08-25 03:10:25 +00:00
e37ce1c5b6
Make spl(9) rountines target port dependent. delay() is also port
...
dependent anticipating a target with high resolution timer available
for on-the-fly re-programming. Enum decstation_t was removed from MI
trap.c.
1998-08-25 01:55:38 +00:00
9c3e900094
Use the pool allocator for pmap structures.
1998-08-25 01:46:01 +00:00
7ff538b614
Oops, use M_VMPMAP as the malloc type in pool_init().
1998-08-25 01:11:11 +00:00
4dfff51650
Use the pool allocator to allocate pmap structures.
1998-08-25 01:09:04 +00:00
04232f6196
declare end[] everywhere the same, fix an egcs "missing braces" warning.
1998-08-24 22:52:23 +00:00
103b7e7b17
The Intel 82371MX identifies itself erroneously as a miscellaneous bridge.
...
(from "Johnny C. Lam" <lamj@stat.cmu.edu> per PR kern/6021)
1998-08-24 19:27:05 +00:00
c6905522d2
These files are no longer used.
1998-08-24 07:23:10 +00:00
b3e9be0ee3
egcs warning fixes, clean up `register'
1998-08-24 02:37:16 +00:00
62ed825858
vm_offset_t --> [pv]addr_t.
1998-08-24 01:40:26 +00:00
d395d34886
Work on 32-bit cleanup.
1998-08-23 15:52:43 +00:00
41fb08c335
Added pv_syncflags() (unused) and debug stuff.
1998-08-23 15:51:23 +00:00
a579357e66
Remove dvma_mapin() and other cruft.
1998-08-23 15:49:02 +00:00
66795e62e7
Move sparc_vme_dmamem_map() outside `#ifdef SUN4M'
1998-08-23 10:40:38 +00:00
4539119e83
Nuke phys_map & old dvmamap.
1998-08-23 10:08:25 +00:00
4fe6cdf6ca
Nuke obsolete prototype.
1998-08-23 10:07:09 +00:00
2a6be00de5
Rename DVMA constants.
1998-08-23 10:05:53 +00:00
666587112f
Use bus_dmamem_{alloc,free} instead of the old VM hack.
1998-08-23 10:04:56 +00:00
e68fd96987
Remove DVMA address special cases in pv_changebit().
1998-08-23 10:01:24 +00:00
434a2cc972
Nuke phys_map & old dvmamap.
1998-08-23 09:59:24 +00:00
9a2b941ecb
Rename DVMA constants.
1998-08-23 09:53:03 +00:00
5e1f92b621
64-bit clean cleanup of ofwboot.elf.
1998-08-23 02:48:28 +00:00
c29fdceff3
Prepare for MIDI devices.
1998-08-22 22:50:53 +00:00
edab5330c3
Fix typo in previous fix.
1998-08-22 22:45:19 +00:00
9f5435229a
64-bit-ify this. Depend on _lp64.
1998-08-22 22:16:01 +00:00
592953d009
Fix tyop.
1998-08-22 18:11:25 +00:00
c54c62ad31
bsd_audioio.h is not used.
1998-08-22 15:56:46 +00:00
7f4ad4748e
Eliminated vm_offset_t and vm_size_t.
1998-08-22 14:38:36 +00:00
e727d1e031
Must #define __warn_references if not GNUC.
1998-08-22 12:12:38 +00:00
a84a67440f
vm_offset -> [vp]addr_t and vm_size_t -> [vp]size_t
...
While I'm here, expunge use of 'register' storage class.
1998-08-22 10:55:33 +00:00
00475fbb1f
New times, new pagesize, use magic number in exec header.
1998-08-22 09:16:45 +00:00
9237e1254f
Take a stab at support for the PowerBook 190/190cs, based on comparison
...
with other PowerBook hardware. They seem to be most closely related
to the PowerBook 500-series, but have an internal IDE disk instead.
NOTE: only external SCSI disks have a chance of working, at this
point. Nothing has officially changed with regard to IDE support
(yet).
1998-08-22 06:06:05 +00:00
f234add115
Add gestalt machine type for the PowerBook 190/190cs.
1998-08-22 05:47:37 +00:00
9948205c5a
Prepare for support of Apollo-cpuboard-reworked A3000 mainboard SCSI.
1998-08-21 19:13:27 +00:00
ae8175cb09
Workaround for the incomplete fastmem loading scheme: put uptbase lots higher,
...
so that hopefully it doesn't get overwritten by the 1:1 mapped kernel copy.
See line 375 for an explanation.
1998-08-21 18:51:58 +00:00
5a294dbb55
Add missing "-a" to mkdep line for locore_machdep.S.
1998-08-21 16:24:25 +00:00
d4d7416198
vm_offset_t --> [pv]addr_t.
1998-08-21 16:13:28 +00:00
f6dcf3f9c6
Change vm_offset_t to [pv]addr_t.
1998-08-21 14:52:29 +00:00
79dd1e8563
Convert to [pv]addr_t & [pv]size_t.
1998-08-21 14:13:53 +00:00
b8a1caac4a
Convert to [pv]addr_t & [pv]size_t.
1998-08-21 14:12:18 +00:00
24255abca0
iommu_{enter,remove} moved to iommuvar.h
1998-08-21 14:10:42 +00:00
ca5b5652b4
Remove vm_offset_t & vm_size_t.
1998-08-21 14:09:59 +00:00
f318f15bc3
Convert to [pv]addr_t.
1998-08-21 14:07:37 +00:00
5bcec15811
Add #ifdef DDB around Debugger();
1998-08-21 14:07:03 +00:00
6aba9c11ff
VAX logical page size increased to 4k.
1998-08-21 13:46:38 +00:00
33395d926e
Remove an extraneous printf when attaching a Valkyrie.
1998-08-21 13:46:31 +00:00
b3574d3923
VAX logical page size increased to 4k.
1998-08-21 13:41:09 +00:00
7575f8fac5
Move iommu_enter/iommu_remove here from <include/cpu.h>.
1998-08-21 13:29:57 +00:00
057ca9bfe1
No longer used.
1998-08-21 13:22:25 +00:00
5617a263e0
Correctly initialize scb struct.
1998-08-21 13:19:43 +00:00
f1a6a0936f
The VAX46 (VS4000) needs the clock stuff the VAX43 does...
1998-08-20 23:52:42 +00:00
02d030ca52
Pass on `NOWAIT' and `boundary' args to extent_alloc().
1998-08-20 20:49:33 +00:00
363b678b9e
Flesh out more of the sun4 busdma functions.
1998-08-20 20:46:59 +00:00
02c059eefa
Pay attention to BUS_DMA_NOWAIT & boundary args where appropriate.
1998-08-20 20:45:40 +00:00
ff2c3adddc
Add some braces to stop the new egcs warnings.
1998-08-20 19:55:06 +00:00
fb9171df3d
Fix write/read of memory.
1998-08-20 16:47:11 +00:00
b27d106197
Match grf_obio devices correctly for the 58x/63x.
1998-08-20 13:58:04 +00:00
aee27828f9
Some machines (Voyagers) apparently have zs devices with multi-valued
...
register properties in the PROM.
1998-08-20 11:47:39 +00:00
a6d3fb3799
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-20 08:33:41 +00:00
f73a7043f3
ISA Game port driver, lifted from BeBox port.
1998-08-20 06:31:34 +00:00
b176b7ba0f
Add joy driver at cdev 56.
1998-08-20 06:30:56 +00:00
31ac3d022c
Add joy driver devsw declarations.
1998-08-20 06:28:43 +00:00
2d282c7e70
Add joy driver glue.
1998-08-20 06:28:18 +00:00
cc042ba0e5
Correct a function name in a panic message.
1998-08-20 05:46:20 +00:00
5232b66bd5
Initial steps to getting the VAX to use the MI driver framework.
1998-08-18 23:55:00 +00:00
ff266f0937
Add some braces to make egcs happy.
1998-08-18 18:23:07 +00:00
a76eb95be9
Tab vs. space, and turn *off* XSERVER_DDB by default.
1998-08-18 17:03:42 +00:00
2ce88694c7
Do not include files.isapnp, this file is now included from files.isa...
...
(Julian Coleman)
1998-08-18 11:51:07 +00:00
cf3457cb9d
Add some braces to make egcs happy (ambiguous else warning).
1998-08-18 07:53:47 +00:00
47cf1b0e0a
Circad Leonardo video driver by 'maximum entropy'.
1998-08-18 07:45:02 +00:00
136e58fb9f
Internal cleanup.
1998-08-17 22:35:04 +00:00
5e04cc8bb7
Internal bus_dma cleanup.
1998-08-17 22:33:09 +00:00
fb0cc46daf
Internal cleanup.
1998-08-17 22:30:08 +00:00
4396c67463
Internal cleanup.
1998-08-17 22:28:00 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
0809175887
#define _CS_OFISA_MD_REG_FIXUP
1998-08-17 20:40:53 +00:00
thorpej