it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
- make some debugging messages in iommu_remove() saner and add some more.
- decrement 'len' in the no streaming buffer case, also.
- in iommu_dvmamem_map(), do not enter these mappings into the IOMMU,
only into the CPU (the former is done at _load time).
- make a panic that shouldn't happen a DIAGNOSTIC.
- merge IOMMU DVMA code from sbus/psycho into iommu.c. this code was
identical and a few minor inconsistencies had crept in. this way
keeps them all in sync.
- with this code gone from psycho, merge the psycho.c and psycho_bus.c
files. same with ebus/ebus_bus.c. delete the _bus.c files.
- add a _ds_boundary member to the dma segment structure, so that later
dma mappings can find this value.
- set _ds_boundary in machdep.c:_bus_dmamem_alloc().
- kill much dead code.
- make GENERIC64 include GENERIC and set the 3 optoins it needs. suggested
by hubert feyrer.
- add a comment that we maybe should use the `bpp' driver, not the lpt, on
the ebus because the `bpp' driver does DMA already.
- ebus_attach_args got a member renamed
diag regsiter to work out why the (non-existant) strbufs don't work.
- check for malloc failure in _all_ places.
- setup the PCI control register as recommended in the IIi users manual.
install an interrupt handler, make sure we set these bits to 1. now,
interrupt_vector in locore can find our registered interrupt handlers
and at least try to setup a call to them.
where the floppy driver would wedge because a motor-on timeout would
be cancelled by another I/O operation cancelling a motor-off timeout.
From enami tsugutomo <enami@sm.sony.co.jp>.
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
Fix a bug causing interrmittent panics in interrupt dispatch.
Use interrupt vectors for softints.
Add a new send_softint interface.
Improved D$ flushing.
Improve traptrace and other debugging enhancements.
- in sbus_get_intr(), if we are not an onboard device (ie, sbus card),
encode the slot number into the sbi_pri so that we can later extract
it and use it to find the interrupt map & clear registers for this
device.
- remove "intr" support as it is really pre-sun4u only.
- don't "pause" for so long in sbus interrupt debug messages..
with the slot number being passed back from sbus_get_intr(), the FS/BE
card in an ultra2 now appears to get interrupts and gets beyond
waiting for the scsibus probe!
that is priority is rasied. Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.
This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).
XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX. This platforms still have this bug until their
XXX spl*() functions are fixed.
Remove the entire idea of fasttrap interrupts since V9 traps are really cheap,
the CPUs are really fast, and the completely different trap frames would make
these handlers really difficult to implement.
pmap_changeprot() was only used by the clock and one other place; deprecate it.
probeget() and probeset() now take 64-bit addresses even in 32-bit mode so we
can probe IO locations by physical addresses.
Some pmap cleanup.
Some more copyright cleanup.
the arguments are changed so the address is first and the ASI second so we
can have the address in %o0:%o1 and not worry about unused registers.
Also a bit of copyright cleanup.
(`SUNW,sabre') for now, and it doesn't really quite work there yet anyway.
the bus space/dma code is cloned from the sbus driver. the IOMMU code also
is cloned from the sbus code, but separated out into iommu.c so that we can
share it with the sbus driver. hopefully, much of the bus space/dma code
can also be re-shared with the sbus driver and the ebus driver but for now
these copies will do.
support for the real UltraSPARC PCI (`SUNW,psycho') is unwritten, though
most of this code is shared with it.
we can probe PCI config space and try to configue devices, but interrupts
don't work yet...
the bus space/dma code is cloned from the PCI code to do the same thing
which itself was cloned from the sbus bus space/dma code. the bus dma
code is non-functional at this point.
managed pages, into KVA space. Since the pages are managed, we should
use pmap_enter(), not pmap_kenter_pa().
Also, when entering the mappings, enter with an access_type of
VM_PROT_READ | VM_PROT_WRITE. We do this for a couple of reasons:
(1) On systems that have H/W mod/ref attributes, the hardware
may not be able to track mod/ref done by a bus master.
(2) On systems that have to do mod/ref emulation, this prevents
a mod/ref page fault from potentially happening while in an
interrupt context, which can be problematic.
This latter change is fairly important if we ever want to be able to
transfer DMA-safe memory pages to anonymous memory objects; we will need
to know that the pages are modified, or else data could be lost!
Note that while the pages are unowned (i.e. "just DMA-safe memory pages"),
they won't consume any swap resources, as the mappings are wired, and
the pages aren't on the active or inactive queues.
* Map the message buffer with access_type = VM_PROT_READ|VM_PROT_WRITE `just
because'.
* Map the file system buffers with access_type = VM_PROT_READ|VM_PROT_WRITE to
avoid possible problems with pagemove().
* Do not use VM_PROT_EXEC with either of the above.
* Map pages for /dev/mem with access_type = prot. Also, DO NOT use
pmap_kenter() for this, as we DO NOT want to lose modification information.
* Map pages in dumpsys() with VM_PROT_READ.
* Map pages in m68k mappedcopyin()/mappedcopyout() and writeback() with
access_type = prot.
* For now, bus_dma*(), pmap_map(), vmapbuf(), and similar functions still use
access_type = 0. This should probably be revisited.
Make the initializer for BAUDLO depend on PCLK directly; it was incorrect on
some ports where PCLK is not 4.9152MHz.
XXX Is the default value actually used?
command (unlock for sd and cd) if no other partitions are open, return
EBUSY otherwise. DIOCEJECT will have the old semantic if its argument is not
0. The old ioctl has been renamed to ODIOCEJECT for binary compatibility.
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
Added genassym.cf
Removed lderr which should never have gotten in
Removed lots of dead code from locore.s
Added some softint stuff to intr.c
Added support for halt -p
esp and le both use bus_dmamap_*() functions now
instead of kdvma_mapin()
groundwork for PCI (but we still have no drivers for
any sun4u PCI devices)
mrg