84877e89f6
Allow a BREAK to cause a kgdb_connect().
1997-08-31 21:26:37 +00:00
7950e785f9
Switch to MI kgdb code.
1997-08-31 21:22:44 +00:00
2b1e7bab51
pmap_writetext(): use context 0.
1997-08-31 21:08:03 +00:00
a79408b6c7
Change match routine to use "audio" as the ROM name.
1997-08-27 22:42:23 +00:00
c58d387b0f
Fix prototype for amd7930_set_params.
1997-08-27 22:33:59 +00:00
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
6616d47838
- Change audio_hw_if a little: set_param now sets the play and record modes
...
at the same time instead by using two different calls. This enables
it to check more easily if the combined mode is all right.
- Improve the error checking in audio.c.
- Add a new audio property, AUDIO_PROP_INDEPENDENT, show if the
play and record settings are independent.
- Fix some buglets in audio.c.
1997-08-24 22:31:23 +00:00
6ac7f6248f
add a before tab to SCSIVERBOSE
1997-08-23 19:16:06 +00:00
556cf1abc0
Make it possible for audio to attach to audioamd.
1997-08-22 11:45:06 +00:00
1a7afa3853
add commented out reference SCSIVERBOSE option
1997-08-20 18:38:13 +00:00
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
419960bd0e
Changes for PCI Qlogic ISP2100 meant a few minor changes.
1997-08-16 00:33:04 +00:00
dd07701791
Do not use `rasterconsole' by default on this framebuffer.
1997-08-07 19:12:30 +00:00
46ca64dc14
Comment out body of pmap_copy() which got committed accidentally (btw. it
...
works, but its performance benefits are not immediately obvious).
1997-08-05 11:06:58 +00:00
b449c91f9b
Correct typo that has been lurking undetected for some time.
1997-08-05 11:00:10 +00:00
a7f1e52ffd
Some cosmetic changes suggested by Brian Baird: cache config msgs & RT625 fpu.
1997-08-05 10:40:21 +00:00
7841423191
Hypersparc detection.
1997-08-04 22:41:25 +00:00
8f937196fb
Don't flush the cache in setpte4m(). Most callers have flushed the page
...
already and some MMUs might require a valid mapping to exist for the
virtual address to be flushed.
1997-08-04 20:09:54 +00:00
3ffd287cc0
Move MMU dependent DDB goo into a pmap helper function.
1997-08-04 20:02:59 +00:00
24ad0e8316
Prototype pmap_writetext().
1997-08-04 20:00:47 +00:00
658656bb99
Audio changes:
...
- Change the way attach and open works to allow multiple audio
devices.
- Split the mulaw.c file into two to avoid dragging in mulaw
convertsion when they are not needed. Add 16 bit alaw/mulaw tables.
- Change the way audio properties are gotten.
- Recognize more versions os SoundBlaster.
1997-07-31 22:33:08 +00:00
fc96112975
fix editing boo-boo
1997-07-29 17:55:38 +00:00
d074ca9f6e
%x -> 0x%x
1997-07-29 10:09:51 +00:00
b4750d5084
missed %lx -> 0x%lx
1997-07-29 10:04:44 +00:00
4c351f243e
%x -> 0x%x
1997-07-29 09:58:04 +00:00
53adf300b3
%x -> 0x%x
1997-07-29 09:41:53 +00:00
a63034762b
Audio: Remove the machine dependant code I put in audio.c by mistake.
...
This adds another method to audio_hw_if. Also remove a field from
audio_hw_if that was not read-only.
1997-07-28 20:56:05 +00:00
d58bc6796f
audio: Simplify handling of AUDIO_SETFD and committing of encoding mode.
1997-07-27 23:51:48 +00:00
9745684ebe
Changes to the sudio system:
...
- It is now possible to handle devices that want "looping" DMA,
e.g. the SoundBlaster correctly. The WSS and SB drivers use this.
To do this several new methods were introduced in audio_hw_if.
- Different silence handling (forced by previous change).
- The audio driver can now be mmap()-ed, but due to problems in
the VM system only for writing for now.
- The OSS (Linux) audio emulation takes advantage of some of the
new features.
1997-07-27 01:16:32 +00:00
5a47438604
Add some missing entries. Make SINTR_VME()/SINTR_SBUS() more useful.
1997-07-22 20:19:10 +00:00
bdb232d2b6
Don't use <lib/libsa/if_ether.h> anymore. This was a copy of the
...
old (before ARP changes) <netinet/if_ether.h>, intended for
temporary use.
1997-07-22 17:41:01 +00:00
a92a5224ee
Remove a couple of "ms2 only" from cache-flush ASIs.
1997-07-20 18:55:03 +00:00
bd4c20b09e
Invalidate cache tags before enabling the cache, if appropriate.
1997-07-20 18:48:35 +00:00
0e6ca8da9f
Use `target selection with DMA' by default.
1997-07-19 21:57:01 +00:00
63fa13065c
#include "locators.h"
1997-07-19 21:43:54 +00:00
8b278df35a
Change the extern declaration of __flt_rounds() into a proper prototype.
1997-07-18 05:11:52 +00:00
ca1bba150a
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 03:16:39 +00:00
9388f271a9
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 02:12:50 +00:00
6b12855c49
pmap_extract(): move printf()'s inside debugging brackets. The caller
...
decides what to do upon finding an absent mapping.
1997-07-16 15:35:23 +00:00
533bf031cd
Add RCSID() macro.
1997-07-16 15:16:43 +00:00
198bd713f2
Generate assym.h dependencies when making 'depend'.
1997-07-12 22:07:36 +00:00
ad1710ce1e
update comment from 1981 on memory and disk prices -- pr-2754 from Curt Sampson
1997-07-12 16:18:36 +00:00
f3dc7ce0f4
Use setpgt4m(), not bzero(), to initialize a pmap's first-level page table.
...
Fix a slightly misleading comment.
1997-07-09 21:51:26 +00:00
94289e9990
In the turbosparc's "match" function, test for the `master' CPU, in case
...
someone ever builds a multi-processor turbosparc module.
1997-07-08 22:14:42 +00:00
8eae6eb3b7
Fix a pasto in kvm_uncache() (sun4m)
...
Add TLB flushes when removing segments/regions.
Flush cache appropriately when cache-tag protection bits need invalidation.
1997-07-08 20:02:47 +00:00
27d22f8faf
Add FPU version 5 (turbosparc on-chip).
...
Re-arrange cpuattach() a bit so that more initialization is done before
dealing with the FPU. Some more work is still required to de-couple
FPU detection from the autoconfiguration attach code in SMP systems.
1997-07-08 19:58:14 +00:00
99edebd566
fbrcons_{rows,cols} helper functions.
1997-07-07 23:31:30 +00:00
af86c62d61
Get console tty size from raster console if applicable.
1997-07-07 23:30:22 +00:00
7a959f1752
Add `maxusers' line and set it to 32.
1997-07-07 21:54:51 +00:00
42f6c894f8
Raise max maxusers to 1024
1997-07-07 21:53:43 +00:00
0360275f33
Clear relevant `cpuinfo' fields upon detection of a cloaked TurboSparc.
1997-07-07 20:43:25 +00:00
2d50be8cb3
Add `turbosparc_getfaultstatus()' to be used instead of the generic srmmu item.
1997-07-07 20:06:42 +00:00
3c1b9ba29b
Install media functions only if something useful can be returned.
1997-07-07 16:28:44 +00:00
bcb9e18784
Fix bad parentheses in `getcpuinfo()'.
1997-07-07 08:44:01 +00:00
27434aef27
Follow lock changes (DEBUG => LOCKDEBUG).
1997-07-06 23:57:16 +00:00
4846e5ba47
Adjust for generic lock changes.
1997-07-06 23:52:52 +00:00
f02db5d4f6
Turn off microsparc II compatibility bit in Fujitsu turbosparc processors.
1997-07-06 22:23:37 +00:00
0ab67aca5d
Define the turbosparc's processor configuration register.
1997-07-06 22:21:11 +00:00
c4e35e2f8b
Have a patchable variable `ignore_bogus_traps' (0 by default) that
...
controls whether or we panic when receiving an unhandled trap.
1997-07-06 21:34:45 +00:00
bbb57cadb4
Use the module info fields `cputype' and `vactype' to hold a processor
...
family's type and cache information. This can be optionally modified
by the associated `match' routine.
1997-07-06 21:18:27 +00:00
55a6f97322
Add VAC_UNKNOWN to `enum vactype'.
1997-07-06 21:15:14 +00:00
81469e565e
Add two more fields (`cputype' and `vactype') to the module info.
1997-07-06 21:14:25 +00:00
3de323b091
Fix printf formats.
1997-07-06 19:32:39 +00:00
48ad000318
Slight optimization when pv_unlink'ing last entry (suggested by Eric Fair).
...
Use MR4() macro where appropriate.
1997-07-06 12:29:54 +00:00
c3af302842
Use setpgt4m() in setptesw4m().
1997-07-06 12:22:39 +00:00
aff11374d7
Defer setting the CACHEPAGETABLES flag until cache_enable().
1997-07-02 14:52:59 +00:00
94113eb121
Remove a bogon.
1997-07-02 14:39:24 +00:00
363c28ce88
Fix typo in last commit.
1997-06-29 18:44:21 +00:00
adc8e8d8b0
Accommodate non-VM_PMAP_HACK code.
1997-06-28 19:59:03 +00:00
a9b31740a2
Remove __VM_PMAP_HACK.
1997-06-28 19:56:12 +00:00
0404c01c46
#define DB_AOUT_SYMBOLS
1997-06-26 01:26:56 +00:00
7c03f46228
Don't print a warning if the returned transfer count is less than 0.
...
This can happen during perfectly normal operation if:
(a) We are using DMA to select a target, and
(b) we are interrupted by another target reselecting us.
Per discussion with Paul Krannenburg.
1997-06-26 00:31:20 +00:00
cf016f61f4
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:56:28 +00:00
f9d3344f9c
xysize(): only call xyopen()/xyclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:47:00 +00:00
4269e0eab1
xdsize(): only call xdopen()/xdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:45:03 +00:00
5dad1a32a4
move installboot.8 into src/share so everyone builds it.
1997-06-16 13:58:24 +00:00
ddfaeab080
Change `pv_va' entry to a `vm_offset_t' as suggested in PR#3703.
...
Also, re-arrange pmap_page_protect4_4c() like the 4m variant; add
a more detailed panic message.
1997-06-12 21:02:43 +00:00
0bf9195444
Erase kernel PTEs in pmap_page_protect4m(). This bug would leave spurious
...
entries in the kernel address space, eventually leading to panics in
pv_unlink(). This takes care of PRs 3575 & 3703.
1997-06-12 19:14:28 +00:00
552af779d2
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:46:19 +00:00
dc6a98e92c
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:09:23 +00:00
cbc17e9dd1
ie2,ie3 and ie4 are 32-bit.
1997-06-10 21:54:21 +00:00
1ab49e584f
Avoid "false positives" in match routines.
1997-06-10 20:59:10 +00:00
2851bca951
vme_establishintr: remove SUN4 arch check; this now works on sun4m as well.
1997-06-10 20:57:48 +00:00
6ab737a609
Initialize machine from MACHINE and machine_arch from MACHINE_ARCH.
1997-06-08 23:59:57 +00:00
38b9b3385b
Update for changes in the core ISP driver.
1997-06-08 06:35:45 +00:00
7de2a6f83d
Use the `ranges' property to deal with VMEbus address spaces.
1997-06-07 19:16:23 +00:00
af40331aec
Add some VME address modifiers used by vmebus_translate().
1997-06-07 19:10:57 +00:00
de7e49a954
Add 'char machine_arch[] = "xxx";' for the new sysctl hw.machine_arch.
1997-06-06 23:26:01 +00:00
d7b698b984
Set `rr_iospace' to PMAP_OBIO when translating relative sbus addresses.
1997-06-01 22:10:39 +00:00
81f7adf672
need to bump this back to version 1.7 (last one).
1997-06-01 14:08:58 +00:00
76b4fd4206
need to bump this back to version 1.7.
1997-06-01 14:08:15 +00:00
2a4bfcce7b
need to bump this back to version 1.7.
1997-06-01 14:07:27 +00:00
640e369d6c
need to bump this back to version 1.7.
1997-06-01 14:07:01 +00:00
887cadb09b
need to bump this back to version 1.7.
1997-06-01 14:06:23 +00:00
e3ee873c1f
need to bump this back to version 1.7.
1997-06-01 14:05:49 +00:00
7cedf69cbd
Completely rearrange SPARC boot code, modeling it after alpha and hp300
...
ports' boot programs. Also added support for loading gzip'd kernels,
useful for booting from floppy. From Jason R. Thorpe <thorpej@nas.nasa.gov>,
tested by Matthew Green <mrg@eterna.com.au> and Erik Fair <fair@clock.org>.
1997-06-01 03:39:03 +00:00
4f292fbb17
Remove `bustype' argument from bus_tmp().
1997-05-24 20:17:04 +00:00
ec02e14ae2
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:16:06 +00:00
e59f568ea7
Remove `bustype' argument from map[io]dev().
1997-05-24 20:16:05 +00:00
3137152cb5
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:16:04 +00:00
5ec5d5bca3
Remove `bustype' argument from map[io]dev().
1997-05-24 20:16:03 +00:00
954e31e49a
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:16:02 +00:00
3cb17e53d3
Remove `bustype' argument from map[io]dev().
1997-05-24 20:16:01 +00:00
b3aae0c409
Remove `bustype' argument from map[io]dev().
1997-05-24 20:15:58 +00:00
821f712972
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:15:58 +00:00
9f2499dc98
mapdev() looses the `bustype' argument. It's superseded by `rr_iospace'
...
on all archs.
1997-05-24 20:13:48 +00:00
72c03c7df9
Use page type encoding macros from pmap.h
1997-05-24 20:09:45 +00:00
fb5c729d4a
Use `rr_iospace' to track the MMU page type bits. On sun4c/sun4m the
...
iospace value is always learned from the PROM; on sun4, we infer it
from the BUS_* parameters.
This obsoletes the `bustype' argument in bus_tmp().
1997-05-24 20:08:41 +00:00
ea0f4900ff
Always use `rr_iospace' to track the MMU page type bits.
...
This obsoletes the `bustype' argument in map[io]dev().
1997-05-24 20:03:03 +00:00
957b6c1c18
Define macros for encoding I/O space bits into the physical address
...
passed to pmap_enter().
1997-05-24 19:59:25 +00:00
ae61406a77
Replace bus_tmp() by mapdev() equivalent.
1997-05-19 19:59:36 +00:00
f88bf0a6e9
Replace bus_tmp() with mapdev() equivalent.
1997-05-19 19:56:26 +00:00
350c3993aa
Remove bus_tmp().
1997-05-18 21:26:40 +00:00
c0036ae48d
Remove bus_tmp(); it's just a special case of mapdev().
1997-05-18 21:26:22 +00:00
dc9c65530d
Define a `vme' device on `iommu' and allow `vmes' and `vmel' as sub-busses.
1997-05-18 19:41:02 +00:00
18a4aeea23
A bit of framework for sun4m VME busses.
1997-05-18 19:37:37 +00:00
0914945bfe
Keep a shadow copy of the aux register's contents.
1997-05-17 17:52:50 +00:00
e2a58b69f7
Add #define __VM_PMAP_HACK as a temporary measure.
1997-05-16 21:35:30 +00:00
7ae81c002a
Actually use the passed physical address in viking_cache_flush(). Also,
...
use hardcoded cache parameters for now.
1997-05-15 22:53:01 +00:00
72d640a497
Tweak gain curve (from nsayer@kfu.com; PR#2909)
1997-05-15 22:32:56 +00:00
3f1da95bc5
Nuke old `mmu3l' references.
1997-05-15 22:25:45 +00:00
4f48bf2bb1
Change some malloc -> MALLOC and free -> FREE
...
More accuracy in diag/panic messages (part of PR3602; Eric Fair).
1997-05-15 19:19:49 +00:00
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
84bca5d679
Don't use _SUBDIRUSE outside of bsd.subdir.mk.
1997-05-07 17:28:47 +00:00
8744fe853c
clean up use of whitespace
1997-05-07 01:55:23 +00:00
45cc2d6db4
turbosparc: 256 contexts, page tables cannot be cached.
1997-05-06 21:00:54 +00:00
6c717dd82c
Bump version number to celebrate the fact that the bootblocks can be used
...
unmodified across all platforms.
1997-05-04 14:19:22 +00:00
a05df4e228
* finish off support for the 82077 chip as found on sun4m machines.
...
* add non-dma mode bit to `specify command', so formatting disks starts
working (thanks to Jeremy Cooper for finding out about this).
1997-05-02 13:03:44 +00:00
3e9d89dcd0
Switch to copy of file in /sys/dev/ic.
1997-05-02 08:30:42 +00:00
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
547d95a029
Remove esp FLUSH when residual bytes are present in FIFO, the ncr53c9x
...
driver will flush when necessary. Doing the FLUSH here interferes
with DMA-enabled target selection.
1997-04-27 22:12:40 +00:00
00e4b647d9
add NetBSD RCSid.
1997-04-22 07:48:31 +00:00
58fbadc150
Put back missing label.
1997-04-21 18:20:14 +00:00
89205383a7
Make microtime() work correctly with a 4- or 4C-only kernel.
1997-04-21 05:47:08 +00:00
43445623fd
mmmmap() should return -1, not ENOTSUP.
...
Optimize the case of writing to /dev/zero etc, like the alpha,i386 and m68k.
1997-04-19 21:28:53 +00:00
d3028dd4a2
* Remove ineffective and incorrect cache flush in viking_mmuenable().
...
* A bunch of cosmetic changes.
1997-04-18 19:51:05 +00:00
5b733ef58a
STRIP -> STRIPFLAG
1997-04-17 07:41:05 +00:00
2357b53997
Avoid race for the chip's interrupt pending status bits in zscnputc()
...
by introducing a single-character queue to defer kernel console output
until the transmitter interrupt handler runs.
1997-04-14 21:26:28 +00:00
5c54a811e3
Add CY7C601 to SUN4 cpu section (Sun 4/300, 4/400 series). Noticed by
...
Ralph Sauther.
1997-04-14 21:05:13 +00:00
fbf7bcc591
Cypress 605 cache can be run in write-back mode (fingers crossed..).
1997-04-11 20:32:13 +00:00
1774dc8fbe
Add Cypress 605 with MMU version 0xb (reported by Harald Barth).
1997-04-11 20:21:56 +00:00
b153a134ce
Fix obvious bug: missing `return'.
...
viking_flush: make sure to really expunge all entries in a cache bucket
by poking it (2 * `associativity' - 1) times; noted by Chris Torek.
1997-04-11 20:06:53 +00:00
5eccdd69a6
Avoid compiler warning.
1997-04-11 20:00:10 +00:00
ea87baf550
Since all kernel regions are pre-allocated, we can safely copy kernel
...
mappings to a user pmap when it's created rather than at context
allocation time. Also, do not copy the kernel's region administration
to every user pmap, especially since no memory appears to be allocated
to copy it into.
As a result of this, we must now switch to context 0 in both pmap_copy_page()
and pmap_zero_page() (XXX).
1997-04-09 23:53:40 +00:00
bb07095632
as per discussion with torek, allow TC=1. also add option
...
to allow TC=0. the zilog documentation says not to allow
TC=0 -- however, i tested this and it "does work", as far
as i could tell, so, allow this use if so desired.
1997-04-09 13:15:13 +00:00
242d365b70
Move "range" property description out of generic `romaux'.
...
Add getproplen() function.
1997-04-08 20:08:53 +00:00
cc7899605a
Move "range" property description out of generic `romaux'.
...
Allocate room for this property when needed in bus attachment.
1997-04-08 20:08:20 +00:00
bb1d4e0540
Move "range" property description out of generic `romaux'.
1997-04-08 20:06:26 +00:00
efeeba419f
sun4c and sun4m `aux' register bits differ slightly.
1997-04-07 21:00:34 +00:00
fab7831bfc
sun4c `nbuf' workaround: make threshold dependend on value of MAXBSIZ.
1997-04-06 21:41:36 +00:00
c124058e0b
Undo previous change; it can't have any effect (thinko..)
1997-04-04 21:01:49 +00:00
d1603d004b
Use sc_hwreset() hook to reset ledma (if applicable).
1997-04-04 20:29:23 +00:00
ad36b6970e
Add netatalk netisr
1997-04-03 17:25:18 +00:00
332d00ad1d
Take another register snapshot at the end of dumpsys() to refresh the PCB
...
which may have been altered while writing the dump. Also, save PC in
the PCB.
1997-04-02 20:56:28 +00:00
102497370d
Garbage-collect a few items.
1997-03-31 22:03:11 +00:00
9c2ddb4a59
`*_get_fault_status' should not get profiled; use ALTENTRY for now.
1997-03-31 22:00:39 +00:00
cd9e3a7b59
Remove bogon from otherwise unused fdchwintr() function.
1997-03-31 20:27:32 +00:00
b8cc0f044e
Deal differently with physical memory gaps resulting from alignment
...
restrictions.
1997-03-31 19:53:41 +00:00
9bc200ea19
Fix formatting error in Sun 4 printf().
1997-03-31 17:21:00 +00:00
ac89281245
Fix bogus preprocessor conditional that caused the trap page to
...
not be rounded up when it should be.
1997-03-31 16:42:52 +00:00
dd3f97976c
Comment out DIAGNOSTIC panic in trap code translation. The DIAGNOSTIC is
...
correct, but unfortunately in trap.c trapsignal(p, SIGSEGV, code) passes
the address of the fault in code, instead of the trap code. So we punt for
now doing checking for trap code validity until this gets fixed.
1997-03-30 17:18:19 +00:00
161f6c6f6b
Don't allocate mclrefcnt[]; it's dead and gone.
1997-03-27 21:01:49 +00:00
6fee4ceb1f
viking_cache_enable: clear caches only if not yet on.
...
viking_pcache_flush: don't use flash-clear; use hard-coded parms instead(XXX)
1997-03-27 16:02:10 +00:00
37b247edde
Renames: /dumpconf/cpu_dumpconf/, /boot/cpu_reboot/
1997-03-26 22:42:13 +00:00
71e43d14ab
Move findroot/setroot stuff from configure() to cpu_rootconf().
1997-03-26 22:38:40 +00:00
b468feeebf
In pmap_remove(), check for an empty segment before calling one of the
...
helper functions. This cuts down the number of needless function calls
by approx. 80%, which has a healthy effect on the responsiveness of
a machine under heavy process creation/teardown loads.
The VM system seems to be fond of asking to delete page mappings
which aren't there..
1997-03-25 23:04:02 +00:00
eb3b79e0f2
Move `#endif /* SUN4M */' downward.
1997-03-24 22:56:37 +00:00
4a77b646a2
Add `c_associativity' field.
1997-03-24 19:56:58 +00:00
f62b65006f
Clamp burst sizes to maximum value of parent.
...
Reset ledma from leattach().
1997-03-23 22:54:26 +00:00
a13464f5c9
Garbage collect.
1997-03-22 22:13:17 +00:00
f839bb9816
Add a `[ide]c_ncachelines' field to cacheinfo structure; initialize
...
and use it where appropriate.
Add `swift' and `turbosparc' cache enable function.
1997-03-22 22:03:25 +00:00
8d0c0fd49b
For each major "module", define a separate set of MMU control register bits.
1997-03-22 19:15:53 +00:00
e38b52a46b
Thinko.
1997-03-21 16:29:34 +00:00
1bc742e6dd
cypress_cache_enable: clear bits explicitly before setting.
1997-03-21 15:35:51 +00:00
d584dba41d
Use `setpgt4m()' in some more places.
1997-03-21 15:19:29 +00:00
3a7c1b8d57
viking: flush cache before enabling MMU.
1997-03-21 14:30:19 +00:00
e221d20b5b
Compute a cache attribute correctlier.
1997-03-21 08:39:40 +00:00
cb8601ae21
In viking_pcache_flush(), use a "flash flush" during boot-strapping.
1997-03-21 01:49:03 +00:00
28350d7d18
Set pcache_flush_line function pointer for correct cache configuration.
1997-03-21 01:47:15 +00:00
31f3ff5346
Store cache associativities in the `cacheinfo' structure, and use it
...
in computing the cache "alias distance" and in the viking cache line
flush function.
1997-03-21 01:32:15 +00:00
d79f5b1733
Add declaration.
1997-03-20 23:57:30 +00:00
5704efd375
Replace many setpte4m() calls with a simpler helper function because
...
the address of the desired PTE location is readily available in the
callers context (setpte4m() retraces the entire 3-level structure
to arrive at the PTE location).
Also, in many cases we can do away with the distinction between pmaps
that have or have not allocated a context. This is really only useful
in cases where we're interested in the REF or MOD bits which can differ
in the TLB version of a PTE. By doing this, we avoid getpte()'s which
in many cases instruct the MMU to start a table walk only to find out
that there's nothing there after going 2/3 of the way, or waste a TLB
entry because of TLB flushing soon after getpte() completes.
In addition, there's a hook to flush the cache line corresponding to
the (kernel virtual) location of a PTE entry when it gets altered.
1997-03-20 23:48:37 +00:00
6cea599cbf
Add hook for flushing a single cache line.
1997-03-20 23:26:23 +00:00
63c1c6ab1c
Remove a bunch of no-ops.
1997-03-20 21:44:21 +00:00
5718c246fd
Define various no-op functions.
1997-03-20 21:16:20 +00:00
7cf0d72881
Add a `no-op' function that the compiler can not touch.
1997-03-20 21:10:31 +00:00
7a55cafeeb
Implement set_format.
1997-03-20 16:51:38 +00:00
9018eb5208
Use if_media to select media (or autoselect rules) on the Sun4m.
1997-03-17 03:24:26 +00:00
a372844a7a
Add fix_align() and emulinstr() prototypes.
1997-03-15 22:25:15 +00:00
27b2f0ec7c
Fix a `new-ARP' pasto.
1997-03-15 22:13:55 +00:00
cc87278540
Remove trailing comma in enum definition.
1997-03-15 20:54:10 +00:00
ad1f2b7812
Remove call to mmu_pagein4m(), which is of little use.
1997-03-15 20:31:33 +00:00
f8918b9be9
Simplify `4m' versions of pmapbootstrap() and mmu_reservemon():
...
allocate and initialize all kernel page tables before looking at the
PROM maps, which allows mmu_reservemon4m() to simply walk the PROM tables
without having to allocate bits and pieces of our own kernel tables.
Slightly optimize getcontext() macros in mutli-arch kernels.
Remove un-needed `4m' version of mmu_pagein().
1997-03-15 20:24:09 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
4b697aa304
add emul.c
1997-03-15 02:36:00 +00:00
358f6940ee
- fix return value in case we failed to write to the destination register.
...
- pretty-print registers.
1997-03-15 00:39:51 +00:00
2c62945461
- move instruction emulation and alignment fixing to emul.c
...
- add sparc-v8 {s,u}{mul,div}{cc,} instruction emulation
1997-03-14 23:57:58 +00:00
d9d8878ed1
Asi instruction struct was missing the immediate bit!
1997-03-14 23:54:07 +00:00
cbbcf185ae
Put the genassym.sh output in a temp file, and mv -f it, in case
...
it fails spectacularly and doesn't clean up.
1997-03-14 23:23:45 +00:00
ca5f101ba7
Remove code that stops transfers of >63K. The Sun 4 doesn't have this
...
limitation, and minphys() is supposed to catch this on other architectures.
1997-03-14 19:57:20 +00:00
8a5abffaf5
Add some instrumentation to keep track of PMEG allocation.
...
Enabled #if DIAGNOSTIC.
1997-03-14 14:28:45 +00:00
e36a5ca4de
change microcode array definitions from "unsigned short" to the more
...
correct u_int16_t, and remove bogus casts that the old definition
required.
1997-03-13 04:07:44 +00:00
919efaeb60
Make the microcode table const.
1997-03-13 03:33:03 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
96153388c0
add in the 'isp' device, for Qlogic ISP 1020-based Sbus SCSI board support
1997-03-13 00:46:13 +00:00
9ceaaf3e7b
Turn off "cache pagetables bit" on non-MXCC modules.
1997-03-12 22:52:19 +00:00
b8d7e3deab
No longer needed.
1997-03-12 22:40:07 +00:00
cf26d31ad2
NetBSD RCS ID tweaks, a few comment block tweaks. Also, make copyright
...
notices consistent (per Matt Jacob).
1997-03-12 21:06:41 +00:00
099e30a322
ISP 10x0 driver from Matthew Jacob of NASA Ames Research Center.
...
(March 12, 1997 version).
1997-03-12 20:44:50 +00:00
8e4a126035
Use `mcxx' from cpuinfo instead of re-consulting the MMU registers
1997-03-12 15:44:28 +00:00
0d71b22d50
Use genassym.cf
1997-03-12 15:17:13 +00:00
3e35754576
Added genassym.cf
1997-03-12 15:16:35 +00:00
6e3c9f3b59
Make sure to disable interrupts in the Interrupt Enable register as soon
...
as we've mapped it.
1997-03-12 11:04:35 +00:00
b197276005
Correct output from cpumatch_unknown() and add missing viking variant
...
to cpu table (noticed by Andrew Gillham).
1997-03-12 09:08:29 +00:00
a0d3809966
specs for ISP 10x0 (isp) driver Sbus attachment. From Matt Jacob.
1997-03-12 06:43:25 +00:00
92d853e309
4m memory fault traps: simplify fault address logic, since per-CPU
...
fault-status reading stubs pre-cook the arguments.
illegal instruction trap: catch iflush instructions that cause this trap
on some CPU/MMU combinations.
1997-03-11 01:20:25 +00:00
01e424f233
Insert RCS Id.
1997-03-11 01:03:07 +00:00
abc39039f1
Move some parts of CP detection to cpu_attach() in cpu.c.
...
Call get_cpuinfo() for the boot CPU to collect the minimum information
to get the bootstrap rolling.
sun4/sun4c: the Interrupt Enable register is now mapped here after pmap
is initialized (was in locore).
Replace `cpumod' and `mmumod' with `cpuinfo.*' equivalents.
Allow more than one CPU to be configured in mainbus_attach().
1997-03-11 01:01:59 +00:00
476ef3b431
Per-CPU information which is collected in cpu_attach().
...
Many things in here were imported from an earlier version from Aaron
Brown and are not yet used. This version has all the attributes of a
snapshot; more to come as addtional CPU/MMU details get implemented.
1997-03-11 00:55:24 +00:00
eb71a02a7f
Re-write of CPU/MMU detection code.
...
Use a table driven classification based on CPU and MMU implementation/version
fields. Each CPU class or module defines a collection of routines that
implement CPU or MMU specific operations that can collect detailed setup
information.
All information is collected in a `cpu_softc' structure provided by the
auto-configuration code. However, in the interest of SMP support this
structure is located at a fixed virtual address identified by the
symbol `cpuinfo'. The `boot' CPU currently uses the the physical page(s) at
address 0x2000 for its cpuinfo. Consequently, the fixed virtual address
will be `KERNBASE+0x2000'.
The cache flush routines for several systems (sun4/4c vs. sun4m;
virtual vs. physical tags) have been factored out. Function pointers
to an appropriate set are located in `cpuinfo'. The former global
`cacheinfo' structure is now also a part of `cpuinfo'. Because of the
fixed virtual address of `cpuinfo' no extra performance penalties
are incurred by this move. In multi-architecture kernels, there's
no longer the need for run-time `cputyp' tests in this part of the system.
1997-03-11 00:44:00 +00:00
8d2c03c810
Replace `cputyp' run-time tests by inserting multiple branches and NOPing
...
some at startup depending on architecture.
Use `get_faultstatus' field in `cpuinfo' (initialized in cpu.c) to branch
to CPU/MMU specific fault status reading stubs on memory fault traps.
Remove code top map the Interrupt Enable register on sun4/sun4c. Its VA
has moved to a high location and is now mapped in autoconf.c after
pmap has initialized. Note: this renders NMIs during bootstrap() fatal
(maybe loading %tbr should be deferred).
1997-03-11 00:09:29 +00:00
7d6231865e
Use cache flush routines provided in `cpuinfo'.
1997-03-10 23:55:40 +00:00
129d9d5cf6
Move VA of the sun4/sun4c Interrupt Enable register from locore.
...
Define VA for the per-CPU `cpuinfo' structure.
1997-03-10 23:54:41 +00:00
a566decb35
Use many things from the newly defined `cpuinfo' structure:
...
- vcache_flush_*() routines.
- cpu_type/cpu_flags
- per cpu context table and context administration glue.
- different macros to enable sun4/3-level mmu support.
Simplify sun4m version of pmap_bootstrap() a bit; more to do still.
Move installation of page tables in MMU into a separate routine, in
anticipation for SMP.
1997-03-10 23:26:11 +00:00
ca1c4cc6c3
Define CPUINFO_FAULTSTATUS for use in locore.s
1997-03-10 23:15:03 +00:00
4f30101165
Leave `has_iocache' unset if cache not enabled.
1997-03-10 23:13:59 +00:00
593dbcc7dd
Replace `cpumod' with `cpuinfo.cpu_type' equivalent.
1997-03-10 23:09:55 +00:00
d1be7c7ea4
New location of Interrupt Enable register on sun4/sun4c.
1997-03-10 23:08:31 +00:00
d8fc2afd1e
Replace `cpumod' with `cpuinfo.cpu_type' equivalents.
1997-03-10 23:01:40 +00:00
3811437545
Redo attach code somewhat. Have a go at matching le's and lebuffer's on
...
machines where the PROM does not provide a parent/child relationship.
1997-03-10 22:58:22 +00:00
9119c9c189
Add a field indicating this instance has attached to an `le', so we
...
can have a go at matching le's and lebuffer's on machines where the
PROM does not provide a parent/child relationship.
1997-03-10 22:56:54 +00:00
e5f0b8a132
Remove `cpumod' and `mmumod' and several related constants.
...
This functionality is now taken over by cpuvar.h
1997-03-10 22:50:37 +00:00
95d5138e93
Move some constants from param.h in here
1997-03-10 22:47:52 +00:00
137dda4ac6
Add getmid
1997-03-10 21:49:11 +00:00
18b2bdb000
Fix calculation of max virtual memory to be gobbled up by the buffer cache.
...
Apply "stop-gap" nbuf clamp only on sun4/4c and if nbuf not explicitly
configured in.
1997-03-03 23:07:15 +00:00
e33bdc63ae
Update for MI 53c9x driver.
1997-02-27 01:30:05 +00:00
f868730b6a
esp carries ncr53c9x attribute
1997-02-27 01:17:09 +00:00
5464afa761
Convert the SPARC esp driver to be a front-end for the MI 53c9x driver.
1997-02-27 01:16:19 +00:00
2de163471e
Minimal changes to adapt to removal of NCR5380_PERMIT_RESELECT.
...
This driver should be updated to allow per-target control over
disconnect/reselect, but I will leave that to the port masters.
1997-02-26 22:29:08 +00:00
115b6d92fa
Define ALIGNED_POINTER
1997-02-24 23:16:53 +00:00
4ca0768334
Fix bug in pmap_page_copy and pmap_page_zero that caused data corruption
...
when paging on Sun4m machines with SuperSPARC processors. Essentially,
the copy/zero operations were done via uncached memory accesses, which
bypassed the snooping logic of the write-back caches, causing stale data
to be copied or generated.
Pointed out by Chris Torek <torek@bsdi.com>
1997-02-22 00:06:06 +00:00
ddb0d6fa06
Add `-mno-fpu' to compiler flags; pulled up from 1.2 version.
1997-02-05 00:12:46 +00:00
095b310e77
db_expr_t is now a long.
1997-02-05 00:01:50 +00:00
79da30bb31
typo.
1997-02-04 21:59:26 +00:00
19d153fc48
Nuke some options GENERIC residue.
1997-02-04 04:57:10 +00:00
0b3a46d6b3
Nuke some GENERIC residue.
1997-02-04 04:31:55 +00:00
96c21c1fcf
no need to delcare mcount here; fixes warnings(errors) when compiling a kernel with profiling.
1997-02-01 20:56:40 +00:00
739f23a219
This file is obsolete; this information is now generated by config(8).
1997-01-31 05:12:49 +00:00
2525eee053
Use new machine-independent mountroothook code.
1997-01-31 02:15:54 +00:00
pk