- MDP_FPUSED flag indicates the process has executed at least one
FP insn during its life time.
- pcb_fpregs storage is guaranteed zero initialzed. If the process is FPA
owner, savefpregs() must be called to synchronize it with FPA contents.
- No necessity to save FPA contents into pcb_fpregs prior to the whole
storage is overwritten by process_write_fpregs().
doing a cpu_set_kpc(), just pass the entry point and argument all
the way down the fork path starting with fork1(). In order to
avoid special-casing the normal fork in every cpu_fork(), MI code
passes down child_return() and the child process pointer explicitly.
This fixes a race condition on multiprocessor systems; a CPU could
grab the newly created processes (which has been placed on a run queue)
before cpu_set_kpc() would be performed.
- Change ktrace interface to pass in the current process, rather than
p->p_tracep, since the various ktr* function need curproc anyway.
- Add curproc as a parameter to mi_switch() since all callers had it
handy anyway.
- Add a second proc argument for inferior() since callers all had
curproc handy.
Also, miscellaneous cleanups in ktrace:
- ktrace now always uses file-based, rather than vnode-based I/O
(simplifies, increases type safety); eliminate KTRFLAG_FD & KTRFAC_FD.
Do non-blocking I/O, and yield a finite number of times when receiving
EWOULDBLOCK before giving up.
- move code duplicated between sys_fktrace and sys_ktrace into ktrace_common.
- simplify interface to ktrwrite()
state into global and per-CPU scheduler state:
- Global state: sched_qs (run queues), sched_whichqs (bitmap
of non-empty run queues), sched_slpque (sleep queues).
NOTE: These may collectively move into a struct schedstate
at some point in the future.
- Per-CPU state, struct schedstate_percpu: spc_runtime
(time process on this CPU started running), spc_flags
(replaces struct proc's p_schedflags), and
spc_curpriority (usrpri of processes on this CPU).
- Every platform must now supply a struct cpu_info and
a curcpu() macro. Simplify existing cpu_info declarations
where appropriate.
- All references to per-CPU scheduler state now made through
curcpu(). NOTE: this will likely be adjusted in the future
after further changes to struct proc are made.
Tested on i386 and Alpha. Changes are mostly mechanical, but apologies
in advance if it doesn't compile on a particular platform.
from db_stack_trace_cmd() to db_stack_trace_print(),
and add an additional argument, a function pointer for an
output routine (i.e. printf() or db_printf()).
Add db_stack_trace_cmd() in db_command.[ch], calling
db_stack_trace_print() with db_printf() as the printer.
Move count==-1 special handling from db_stack_trace_print() [nee
db_stack_trace_cmd()] to db_stack_trace_cmd() [nascent here].
Again, I'm unable to test compilation on all affected platforms,
so advance apologies for potential brokenness.
which indicates that the process is actually running on a
processor. Test against SONPROC as appropriate rather than
combinations of SRUN and curproc. Update all context switch code
to properly set SONPROC when the process becomes the current
process on the CPU.
- Add 16 bytes to the stack on entry to _mcount so we don't
overflow it.
- Use inline interrupt {dis,en}abling instead of calling
profiled function in locore.
from Jeff Smith <jeffs@geocast.com>. These are needed to support
-mips2 compilation. With this change, on a QED 5231 we now pass the
paranoia tests, and are successfully using userlands built with -mips2.
use MIPS_TBRPL(). When PTEs are modified, both src and dst TLBs
are invalidated. MIPS3 single TLB entry has paired double PTE
and pagemove() likely walks through multiple pages. The positive
effect of of MachTLBUpdate() or TBRPL() is unclear.
implementation of locore routines between MIPS1 and MIPS3. It's
independent from mips_locore_jumpvec_t which is for cache/TLB
manipulating routines peculiar to processor designs. mips_locore_jumpvec_t
will be replaced with "processor closures" encapsulating implementation
parameters (cpuinfo) and pointers to conventaion routines (cpuops),
eventually.
discard MachTLBUpdate() calls, however, the necessity of TLB entry
modification in such a way is under question because implementation
glitches on ASID management was straightened, those calls can be
sanely removed after all.
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.
These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.
The brokenness is revealed sporadorically by memory usage on runtime.
- Avoid Vr4100 incompatibilty by making sure to retain default pgMask
value for TLB invalidation routines.
Fix regress/lib/libc/ieeefp/except for MIPS. Newer FPE handling code
did not generate SIGFPE, but always SIGILL. Add this back to the
assembly code. The QED 5231 requests the kernel emulates some of
the conditions that generate an SIGFPE, but when the emulation code
did a ctc1 to fsr with an exception the kernel got a FPE in kernel mode.
Fix this by saving the fp regs earlier, then saving the new FSR in
the context. This allows the FSR value to be seen by the SIGFPE
handler.
Add fp emulation for 8 mips2 fpu instructions to handle exceptions
(round.w.fmt, trunc.w.fmt, ceil.w.fmt, floor.w.fmt). This lets
perl5 run when compiled -mips2.
ASID#0 is reserved for pmap0 shared between proc0 and kthreads,
and every TLB for KSEG2 has G (global) bit to have wildcard match
regardless of the process' ASID. MIPS1 would flush TLBs belong
to user spaces upon ASID generation bump. Change for MIPS3 is
to be done.
uvm_page_init() has completed, add a boolean uvm.page_init_done,
and test against that. Use this same boolean (rather than
pmap_initialized) in pmap_growkernel() to determine if we are
being called via uvm_page_init() to grow the kernel address space.
This fixes a problem on some i386 configurations where pmap_init()
itself was needing to have the kernel page table grown, and since
pmap_initialized was not yet set to TRUE, pmap_growkernel() was
choosing the wrong code path.
Fix tested by Havard Eidnes.
half-baked and resulted in one superfluous ASID bump if new pmaps
are created when pmap_asid_generation > 0. Need to initialize pmap
fields correctly.
Yet, this possibly might not be the perfect solution. If one
process bumped pmap_asid_generation _after_ a new pmap was created
and initialized with then-current pmap_asid_generation value. In
that case, the new pmap would have another (superfluous) ASID bump
when 2nd (not 1st) CPU tick is assigned. I'm not sure if this case
would happen.
Have pmap_max_asid variable to hold the maximum number of ASID
(TLBpid) supported by processor anticipating the possible runtime
cost of ((CPUISMIPS3)? MIPS3_TLB_NUM_ASIDS : MIPS1_TLB_NUM_PIDS).
ALPHA; mips1_TBIA, mips1_TBIAP, mips1_TBIS.
- Make sure TBIA and TBIAP ops to have an argument for the size of TLB
which varies across even for MIPS1 implementations.
- Nuke the unused cpu_isa field from processor personality list.
- XXX XXX XXX
it's less-than-optimal and likely a mistake to have TLBUpdate().
It's costy to try to invalidate a single TLB entry whenver a certain
PTE is going to be modified by traversing the entire TLB looking
for the modified PTE because the PTE in question is not in TLB in
most cases. ASID bump could do the invalidation smartly. Solution
is planned for now.
was used for debugg'n purposes which only make senses on particular
hardware configurations and has never been intended to extend pagesize
of NetBSD/mips.
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
(which disables the interrupts) is *not* a good idea. k0 (and k1) is used
by the kernel code such as the TLB miss handler, and the interrupt entry.
If an interrupt occurs after loading k0 and before the SR gets interrupts
disabled, k0 will be clobbered and when used to load the PC on exit from
the exception handler, results in various hangs and crashes.
don't stomp on the return address in k0. Also, don't need to account
for any load delays, as the last register restored (gp) isn't used in
the subsequent instruction.
Shuichiro URATA <ur@a-r.org> makes kernel softfloat emulation code.
http://www.a-r.org/~ur/softfloat1116.diff.gz
is Patch for
sys/arch/mips/conf/files.mips
sys/arch/mips/mips/fp.S
sys/arch/mips/mips/fpemu.c
sys/arch/mips/mips/genassym.cf
sys/arch/mips/mips/locore.S
sys/arch/mips/mips/mips_machdep.c
sys/arch/mips/mips/process_machdep.c
sys/arch/mips/mips/trap.c
sys/arch/mips/mips/vm_machdep.c
After apply this patch,pmax package binary works on hpcmips!
Use flags (formerly access_type) to set page reference/modified status.
Don't use the PG_CLEAN flag from the UVM when checking to see if a
writeable page has been marked as modified.
When updating page status to modified from the UTLBmiss handler, set
the referenced bit in addition to the modified bit.
Page mod/ref status is stored in the pv header, and needs to be copied to
the following entry when removing the head entry, otherwise the status
will be lost (oops!).
Move the common MIPS3 cache flush into pmap_remove_pv() and eliminate the
unnecessary testing of the return value when only compiled for MIPS1.
If the pv entry had the cache inhibited, and we remove the last cache index
alias conflict, restore caching on the mappings for that entry.
Eliminate possible extra cache flushing inherited from the pica pmap: it
was doing the flush when the head entry was being removed - not just the last
entry. Now the flush is done only when the last mapping has been removed.
Also make sure the secondary cache gets flushed [MIPS3 cache flushing needs
to be re-thought/re-done someday].
Update comment for pmap_remove_pv() to reflect these changes.
original debug output was printing the argument to pmap_create(), but
pmap_create() no longer has an argument. The incorrect change now prints
an un-initialized pointer. Change to just print out the function name.
cache. With secondary cache, the CPU will detect cache coherency errors
and the Virtual Coherency Exception handler will flush the appropriate
cache lines to maintain cache coherency. This allows much better
performance than inhibiting the cache for the entire page. This is
very noticable when shared library mappings occur with incompatible
mappings, since there's a very likely chance the mappings will remain
for long periods of time. Systems without secondary cache will still
have the cache inhibited, so there will still be performance issues if
shared libraries don't get mmaped() on correct memory alignments.
This fixes the current problems on DECstations using the R4x00 getting
coredumped programs.
Support VR4100.
Support 16KB page.
Support CPU without FPU.
Fix virtual alias problem(physio() case).
[new options]
options MIPS3_4100 /* VR4100 core */
options MIPS_16K_PAGE /* enable kernel support for 16k pages */
options SOFTFLOAT /* No FPU; avoid touching FPU registers */
big-endian. i386, pc532 and vax still include <machine/byte_swap.h>
and define macros for the {n,h}to{h,n}*() functions. mips also
defines some endian-independent assembly-code aliases for unaligned
memory accesses.
in kernel mode after master interrupt (MIPS_SR_INT_IE) disabled. Tons
of appreciation for Noriyuki Soda and Masanari Tsubai for almost full
time help to spot of the issue.
- remove "need-flag" for mac68k esp driver, as it is not used in anywhere
and conflicts with IPsec ESP header.
This should be the only MD change in IPv6 support, except kernel config file.
Very sorry if you have any compilation problem with it (I believe it is okay).
If your favorite arch is not included in here, please add a
call to ip6intr() from softintr handle.
either endian. Not a perfect solution which would be revealed on
a certain condition when va_arg() is applied to magical struct
arguments passed by value. format_bytes() is now saved. With the
help from Noriyuki Soda and Masanari Tsubai.
TLBUpdate() routine is used for dual purposes. In TLBmod case, just ok
to call 'tlbwi' (as designed). Result in saving of extraneous execution
path. MIPS1 only this moment.
