dce3bea50b
Add msconfig to SUBDIRS.
1996-11-06 15:35:47 +00:00
8d079317a6
pmap_changebit() no longer static.
1996-11-06 15:33:56 +00:00
f2501673f5
Prototytpe bus_mem_map/bus_mem_unmap functions.
1996-11-06 15:33:05 +00:00
44263b4564
Add the external drive to the standard setup.
1996-11-06 14:05:31 +00:00
5f28db13df
- Make it's behaviour on minor numbers identical to that of the Hades
...
floppy driver.
- Fixup format types in the debug-printf's
- Don't print empty lines on unconfigured drives.
- When a drive is detected, show it's default format.
---- Warning: minor numbers are shifted! ---
1996-11-06 14:03:15 +00:00
8bad301566
Re-arrange the order in which devices are scanned for a root filesystem.
...
It's really bogus to try a floppy before a harddisk.
1996-11-06 13:57:12 +00:00
37ae30708a
pmap_changebit() can no longer be static since the bus_mem* functions use
...
it.
1996-11-06 13:55:38 +00:00
bc03497d55
Add bus_mem_(un)map functions.
1996-11-06 13:53:35 +00:00
11a4058f20
Remove fdopen->Fdopen cruft. This is no longer necessary.
1996-11-06 13:51:49 +00:00
291d9eabda
These shouldn't have been imported...
1996-11-06 13:46:10 +00:00
e285606c68
mouse configuration, by Thomas Gerner.
1996-11-06 13:38:12 +00:00
2241acdd09
vga_move_charset() shouldn't need XSERVER. Fixes port-i386/2904.
1996-11-06 05:28:49 +00:00
5c91907fb4
add options: EXEC_AOUT and EXEC_SCRIPT
1996-11-06 03:35:03 +00:00
047ae9a04d
LC III+/Performa 460 series use same vectors as the LC III.
...
Verified by Bob Nestor and Pete Nush.
1996-11-05 07:20:09 +00:00
acaccdd747
make X support code dependent on XSERVER; PR port-i386/2528.
1996-11-05 06:21:25 +00:00
dd7ad6d7b8
Trim the name of the clock interrupt event counters. They were one byte
...
too long, causing a panic in DIAGNOSTIC kernels.
From Steve Woodford <steve@mctavish.demon.co.uk>, on the port-mvme68k
mailing list.
1996-11-05 02:51:03 +00:00
4620e80691
The copyright for this file has been assigned to the NetBSD Foundation
1996-11-04 23:04:43 +00:00
bbd25d0c38
- Move offset for 2nd scsi controller (Q900/Q950/WGS95) to 0x402
...
instead of 0x400.
- Restructure interrupt handling for more performance--continue to
read/write data as long as the device keeps us in a data xfer phase.
There is still a lot of room for speed improvement here. Perhaps it
lies is speeding up the interrupt path in general?
1996-11-04 21:20:01 +00:00
ffe8c5a2ab
Clean out some hacks left over from the old zs driver.
1996-11-04 16:16:09 +00:00
aa965ce3bf
Declare device `audio' at sbus.
1996-11-03 11:18:15 +00:00
9da963b048
Remove include of ncr96scsi.h, since it's now an artifact, and the
...
unused include of ncrscsi.h while we're here.
1996-11-02 07:18:53 +00:00
7685e9d70b
Improve reliability on my Q700, at least. Was getting the occasional
...
glitch--an extra byte on occasion.
1996-11-02 06:52:24 +00:00
92d21510ef
Drop in a sun4m version of AUDIO_SET_SWINTR; thanks to Nick Sayer for
...
the reminder.
1996-11-01 23:32:15 +00:00
33558b9e5f
Take care of the sun4m way of raising soft interrupts.
1996-11-01 23:30:09 +00:00
19b8bfdf3d
Declare device `audio' at sbus where it resides on Microsparc machines,
...
from Nick Sayer's PR#2908.
1996-11-01 23:15:51 +00:00
236a28d49e
Make this compile without COMPAT_10 or _11
1996-10-31 01:16:57 +00:00
e4d7a09a2a
Bug fix for FSINCOS: wouldn't handle FPc == FP1 earlier.
1996-10-30 14:44:47 +00:00
a747e15eed
Add the 68060 bus control register to the list of known cpu superisor mode
...
registers.
1996-10-30 08:22:39 +00:00
be08e182af
In my earlier patch to the m68k fmovem disassembler, I repaired the register
...
naming for fmovem, while breaking it for fmove. We probably never will
see normal fmove in the kernel, nevertheless it should be corrected while
somebody remembers.
Besides, the correct patch is smaller and thus easier to verify than the
origininal one.
1996-10-30 08:11:21 +00:00
20c7b48d76
macs with scsibase offset 0x10000 from iobase use a SCSI CLK of 16.5MHz
...
(off PrimeTime)--all others appear to use 25MHz.
1996-10-30 05:39:21 +00:00
d5e58a6b20
Fix spelling error in panic. Double since of ResHndls[]. Use I/O kludge on
...
all systems, not just CLASSII--A bunch of Quadras apparently have hardcoded
I/O addresses in the ROMs, too.
1996-10-30 05:30:57 +00:00
de6db9f206
Added fix from Jasper Wallace th=at solves the bus hang ups caused when
...
DMA to the card going wrong.
1996-10-30 01:50:01 +00:00
f9d54194d5
Allow the config line "flags" to set bits in si_options.
...
Thanks to Jason Thorpe for the fix! (PR#1929)
1996-10-30 00:31:39 +00:00
769fe0dfca
Get rid of some cruft in the match function.
1996-10-30 00:24:32 +00:00
aac9e275ac
Add a "submatch" function to the obio bus driver so the children
...
of this driver can get rid of the cruft in their match functions.
1996-10-30 00:20:01 +00:00
2fcc0a64d2
Use explicit addresses for obio devices.
1996-10-30 00:17:10 +00:00
84d36b5c2f
Brought right up to date and cleaned up.
1996-10-30 00:12:40 +00:00
0bec347c79
Allocate a DMA channel number when setting up the podule descriptors.
...
The DMA channel is determined by the IOMD present in the machine and the
podule slot number.
1996-10-30 00:07:42 +00:00
2f8b021957
cosmetic...
1996-10-30 00:04:31 +00:00
c11a34daff
Added a dma_channel field to the podulebus structure so that the
...
podulebus driver can allocate the DMA channels for the podules located.
1996-10-30 00:01:05 +00:00
29465fe28a
Updated the acknowledgement comments.
1996-10-29 23:52:59 +00:00
f5a1f76622
Remove the bufferable bit from the pte for the DMA buffer.
1996-10-29 23:37:39 +00:00
68ecde0706
Added support for switch mouse reports between absolute and relative
...
positions.
1996-10-29 23:28:12 +00:00
8666e8f843
Treat MOUSEMODE_REL as an absolute value rather than as a bit flag.
...
Use sc_mode rather than mode.
1996-10-29 23:25:29 +00:00
8d9b74e953
Make sure that DMA channels 2 and 3 are setup as external for the podulebus
...
on RiscPC machines.
1996-10-29 23:22:57 +00:00
7824cc4e83
Added definitions of the IOMD DMA registers.
1996-10-29 23:14:34 +00:00
9785e7cd61
Added support for all variations of the msr instruction.
...
Added support the new instructions defined in the ARM V4 Architecture
Reference manual (long multiplies, half word load and stores,
half word/byte signed loads).
Added support for the ARM810 IMB architecture defined SWIs.
Fixed bug in calculating some immediate constants.
Added support for the wfs, rfs, wfc, rfc instructions
Added support for the floating point compare instructions
Added ldf, stf, ldc and stc instructions.
Fixed mis-disassembly of some msr/mrs instructions.
The ldm and stm instructions will modify the direction identifier to
use the stack variations if the base register is r13.
1996-10-29 23:12:26 +00:00
23439db6ba
The new cg4 driver does not use dev/bt_subr.c
1996-10-29 19:58:14 +00:00
d6dfd783d9
Checkpoint new version of this driver with support for the "Type A"
...
variant of the CG4 (the one with the AMD colormap DACs). This has
been tested only on the "Type B" H/W at this point (Brooktree DACs).
Thanks to Ezra Story and Scott Ellis for the "Type A" support.
1996-10-29 19:54:19 +00:00
cb78378201
Fix typo (fbattach => fb_attach)
1996-10-29 19:27:37 +00:00
a4d7da78e4
Add esp1 at obio?
1996-10-29 06:16:29 +00:00
50c2da8f27
Interrupt-driven, but slow, NCR 53c96 driver for the 040-based macs. Contains
...
some guesses for the machines that have two of these buggers (I don't have
such a machine). This driver is a copy of the sparc/alpha esp with a
minimum of changes--after we get it performing a bit more respectably,
we should see about re-normalizing the sources.
1996-10-29 06:08:58 +00:00
32e07b8b3a
Add prototype for mac68k_register_scsi_b_irq().
1996-10-29 05:42:16 +00:00
215afb273e
Flag Q900/950 as having a second scsi controller.
1996-10-29 05:36:15 +00:00
487a6bebfc
Add a function to install an interrupt handler for 2nd scsi bus (Q900/950).
...
Take a guess that it's at via2, bit 0 (where 5380 DRQ is).
1996-10-29 05:33:37 +00:00
35667ae56f
ncr96scsi -> esp for consistency with sparc and alpha.
1996-10-29 04:26:57 +00:00
3c34dac1d0
Obsolete.
1996-10-29 04:23:50 +00:00
d26717de0e
Workaround for building linux-emulation LKM.
1996-10-29 02:19:25 +00:00
531802b5dd
cpp -> ${CPP}
1996-10-29 00:11:27 +00:00
59b640b2fc
Call kvm_uncache() from dvma_malloc() where it belongs and make sure
...
it's called when SUN4M is nor defined.
Merge in changes from Jason to make dvma_mapin() work on (sun4c) machines
with a write-back cache.
1996-10-28 23:02:54 +00:00
072b7020c4
* Fix a few wrong fallthroughs in switch cases:
...
- add a missing return; at the end of a case, leading to wrong disassembly
of the next few instructions after fmovem.
- while we're here, correct the same bug in PBcc.
XXX there are a few other dubious fallthroughs in this file (which are
not explicitly marked with /* FALLTHROUGH */), which I didn't yet analyze.
* Fix other FMOVEM interpretation bugs:
- correct printing of FP data register lists if all are used (only FP0
would be mentioned)
- correct printing of FP data register lists in the case the list is reversed
(would have printed nothing)
- correct mapping of fp0-fp7 to register list bits (was reversed)
- correct printing of FP control register lists (this list is never reversed)
- correct printing of FMOVEM with FP control registers (the data direction
was interpreted the wrong way)
* While we're here, enhance the comments in MOVC's list of cpu control
registers
1996-10-28 08:43:18 +00:00
1e7948408e
Most 040 models have scsi regs at base + 0x10000, not base + 0xf000
...
like the Q700.
1996-10-28 03:54:08 +00:00
cafb62af25
Fix timer initialization so that we don't gain one extra microsecond per
...
second on Sun4m machines. Although this was in the noise of the unstable
Sun clock crystals before, the discrepancy amounted to about 100 ppm, and
thus made NTP perform poorly. NTP now works happily on my SS20...
1996-10-28 00:20:31 +00:00
eb605060cc
Add options EXEC_SCRIPT and EXEC_AOUT.
1996-10-27 09:14:59 +00:00
2c83ce47ad
add options EXEC_SCRIPT and EXEC_AOUT
...
Sync with ALL, config again.
1996-10-27 09:07:50 +00:00
dd2ea83317
add EXEC_SCRIPT and EXEC_AOUT
1996-10-27 08:52:04 +00:00
e4d79db27e
enable bznsc driver
1996-10-26 17:42:07 +00:00
ca80cc0ce0
add -Wcast-qual
1996-10-25 23:47:01 +00:00
a5649f782f
first arg to alpha_XXX_dmamap is now a vm_offset_t
1996-10-25 20:58:11 +00:00
22b29b5058
prototype alpha_XXX_dmamap(), the alpha DMA mapping hack.
1996-10-25 20:48:59 +00:00
0cda663b65
Make installboot work for 1.2 & 1.2A (should be part of 1.2 patches).
1996-10-25 20:05:04 +00:00
599db9a26c
Nuke declaration of susword(). It's declared in systm.h now.
1996-10-25 20:02:34 +00:00
819ba49d29
Nuke 2 useless instructions that only cause _doboot to panic now that
...
page zero is *properly* protected.
1996-10-25 20:00:39 +00:00
a93d33fb93
db_memrw.c:
...
- Sync with hp300 version.
Machdep.c:
- Notify the vm-system that kernel-text is read/execute
- Notify the vm-system that page zero isn't mapped
[ Grrr.. How do you cancel a check-in when you find out too late they
should have different comments ]
1996-10-25 19:58:42 +00:00
6e74f35ac9
First small hack at 68060 support: processor configuration register.
...
(We don't use the new instructions lpstop and plpa in our kernel, so no hurry.)
1996-10-24 18:30:17 +00:00
b88543e379
Remove addressing bug in hand-optimized assembly code.
1996-10-24 15:52:08 +00:00
753949629e
Make this compile again if PCI_CONF_MODE is defined (unused label).
1996-10-24 12:32:29 +00:00
016d7b35dc
Make this compile without COMPAT_10 (unused variable).
1996-10-24 12:22:43 +00:00
dd4aa9cef1
Fix typo: #endeif
1996-10-23 20:04:40 +00:00
601935b8ae
Use struct trapframe instead of struct frame, and include a
...
slight hack to make this cross-build correctly on a SPARC.
1996-10-23 16:39:27 +00:00
4e462c2f6e
Dont bother grouping labels in computeSignal().
...
This form is easier to compare with trap.h
1996-10-23 16:30:48 +00:00
6fa72d79b5
Add options EXEC_AOUT and EXEC_SCRIPT
1996-10-23 16:14:23 +00:00
4675aac3cf
Set SCSIBase properly on Quadras. Separate out CLASSAV. From Dave Huang
...
<khym@bga.com>.
Also fix COMPAT_NOMID to compile again.
1996-10-23 14:12:37 +00:00
0363bd9a12
Include ether.h since we're now using NETHER, also use NETHER > 0 not NETHER.
1996-10-23 13:35:41 +00:00
8738c57e61
* Phil Budne's is now integrated.
...
* Remote kerneldebugging with gdb works too.
1996-10-23 07:55:10 +00:00
2336fbd2c6
* Phil Budne's much improved scn driver.
1996-10-23 07:52:35 +00:00
e7e91939da
* Remove references to deleted files (oldncr.c, dp.c).
1996-10-23 07:50:03 +00:00
54eec4c697
* Add EXEC_SCRIPT and EXEC_AOUT.
1996-10-23 07:49:58 +00:00
0cdf2807ab
* KLONDIKE has only four serial lines.
...
* KLONDIKE has a ns381 installed.
* Add EXEC_SCRIPT and EXEC_AOUT.
* Enable ddb.
* Enable FDESC.
* Monitor speed is 9600 baud.
* Monitor speaks 8N1.
* Pin down devices on the SCSI-Bus.
* Configure vnd, bpfilter, ppp and tun.
1996-10-23 07:49:55 +00:00
45fe815542
* Add EXEC_SCRIPT and EXEC_AOUT.
...
* Remove lines commented out.
* scsibus0 is attached to ncr0.
1996-10-23 07:49:54 +00:00
225801ae14
* New file; configuration for my second pc532.
1996-10-23 07:49:52 +00:00
414cbce393
* Add EXEC_SCRIPT and EXEC_AOUT.
...
* Use new options for to set the console baudrate and the default
tty mode.
* Include PPP_BSDCOMP and PPP_DEFLATE.
* scsibus0 is attached to ncr0.
1996-10-23 07:49:49 +00:00
63d15a966d
* Sync with i386 version.
...
* Scratch ram for debugger stacks ends at VM_MIN_KERNEL_ADDRESS + 0x1000
and not at VM_MIN_KERNEL_ADDRESS + 0x2000.
1996-10-23 07:46:08 +00:00
e9a160096b
* Sync with i386 version.
1996-10-23 07:46:07 +00:00
4b2a039488
* configure() has to be declared void.
1996-10-23 07:46:04 +00:00
865930408c
* Do not include limits.h, use machine/limits.h.
1996-10-23 07:43:44 +00:00
897acfdcbb
* Do not include stddef.h.
...
* Add definition of offsetof.
1996-10-23 07:43:42 +00:00
1a81564477
* Declare reserve_dumppages and pmap_activate.
1996-10-23 07:30:57 +00:00
1731660b98
* Declare kvtop.
1996-10-23 07:30:54 +00:00
1b03f1bca7
update for new bus.h macros. bus_io_* and bus_mem_* integrated into
...
single bus_space_* framework. Unfortunately, bus_space_{read,write}_*
operations still imply barriers. That will change soon.
1996-10-23 04:12:13 +00:00
0023076caa
Need to initialize fi_glasstty before using it.
1996-10-23 02:34:23 +00:00
32fccda062
The active target needs to be initialized in siiattach() instead of
...
old_siiattach().
1996-10-22 23:15:10 +00:00
2f614ee518
update for new bus.h
1996-10-22 21:34:19 +00:00
8f5cf31b8a
clean up the recent reimplementation, and kill several bogons in the new
...
definitions.
1996-10-22 21:23:49 +00:00
6d917387e4
there is no TC I/O space, so in the new bus.h world order there
...
is no tc_bus_io.c.
1996-10-22 21:15:45 +00:00
39079306ce
Add the missing ".set noreorder".
1996-10-22 20:46:09 +00:00
fd8ac8b221
If no specific kernel architecture is requested, define the CPU_* and
...
NBPG et.al. as in the generic case. This would be the expected thing to do
when compiling LKMs and such.
1996-10-22 19:11:19 +00:00
48dc9aaae4
update alpha bus.h for new bus space interfaces. chipsets haven't
...
been updated yet, and the hacked DMA vto(busphys) macro is gone and
hasn't yet been replaced.
1996-10-22 18:06:54 +00:00
cf6307b2e7
Fix GRFTOGGLE.
...
The old version only toggles to the amiga signal and do not go back to
the CyberVision signal.
1996-10-22 16:59:56 +00:00
8ca5cce5c7
sync (mostly) with Alpha version. Among other things, this fixes the
...
boot-time printf better.
1996-10-22 16:38:34 +00:00
b0e589ced7
Define the *poll functions.
1996-10-22 15:58:12 +00:00
ac4e0ab44e
add a missing \n in the printf in rd_attach_hook. added an XXX
...
comment to note that this printf still isn't quite right (possibly
because this is now a pseudodevice), and the autoconf printout when
mounting root on a ramdisk isn't right, either. This should both be
fixed.
1996-10-22 10:19:10 +00:00
b84a8f42d9
Implement eisa_mem_{alloc,free}(), a method for allocating/freeing
...
EISA bus physical address space.
This i386 implementation allocates system physical address space
after the end of RAM.
1996-10-21 23:12:56 +00:00
16c4c5af26
New bus.h implementation/interface:
...
- No more distinction between i/o-mapped and memory-mapped
devices. It's all "bus space" now, and space tags
differentiate the space with finer grain than the
bus chipset tag.
- Add memory barrier methods.
- Implement space alloc/free methods.
- Implement region read/write methods (like memcpy to/from
bus space).
This interface provides a better abstraction for dealing with
machine-independent chipset drivers.
1996-10-21 22:24:37 +00:00
05fe4c93dc
Force some drive mappings for reasons I won't get into.
1996-10-21 16:43:05 +00:00
d576aeff5e
include update for config(8)
...
increase the number of bpfilters to 16
1996-10-21 11:13:39 +00:00
c8902b053c
include update for config(8)
1996-10-21 11:11:23 +00:00
2745d7df21
This config files are no longer needed.
...
Copy the GENERIC config file and use that.
1996-10-21 11:04:32 +00:00
0d00de6c6e
Fix console problem on fast machines. pr#2777
1996-10-21 09:31:53 +00:00
289b73be85
Fix a raft of printf format strings and some declaration problems for
...
the case where we define DEBUG. From Erik Bertelsen, closes PR 2871.
1996-10-21 05:42:23 +00:00
084b3f6a4c
Fix two bugs noticed by Taras Ivanenko <ivanenko@ctpa03.mit.edu>
...
via.c: don't allow spl to remain at splhigh on error.
mainbus.c: Make sure that variable is initialized.
1996-10-21 01:59:31 +00:00
7117cf93ec
Add #include <sys/systm.h>, so that cc -W* doesn't bitch and error out
...
when printf() gets used in this file.
1996-10-21 01:49:22 +00:00
a6865e3d2b
Don't try to reference nfsbootdevname if we have no ether devices.
...
Fixes PR 2860, from Paul Goyette <paul@pgoyette.bdt.com>.
1996-10-21 00:31:18 +00:00
43ba106ec2
Remove declaration for now-gone function.
1996-10-20 23:47:40 +00:00
af8d8d2a56
Arrange this file into sections (configure(), root device goo, console goo,
...
old-config goo). Place old-config goo at the end so that it's easy to
#ifdef our or delete (muahahah!).
Garbage collect a couple of unused functions.
1996-10-20 23:46:06 +00:00
bbdd41a2a7
Back out last change, and add a comment about what should happen.
...
(*grumble* will teach me to do a `make clean' next time.)
1996-10-20 23:23:28 +00:00
7aa41bf1a7
#ifdef out a couple of variables dependant on USER_LDT.
1996-10-20 22:39:03 +00:00
52acac0518
Regroup the definitions of NBPG, PGOFSET and PGSHIFT into the section that
...
enumerates the possible SUN? combinations.
1996-10-20 20:26:52 +00:00
62c32ff2dc
Drop a duplicate `#include ppp.h'; noted by Chris Demetriou.
1996-10-20 19:32:42 +00:00
4dd0b24bf9
Make sure to refer to `sc_ovtype' only when SUN4 is defined, as noted
...
by `r.evans@ic.ac.uk'.
Also, explicitly testwhether we're dealing with a pfour.
1996-10-20 19:18:00 +00:00
b246894d9b
Document `-a karch' option.
...
Fix a formatting nit.
1996-10-20 16:17:04 +00:00
5ced353a7a
Add `-a <arch>' switch to force the target architecture. Retain `-h' for
...
compatibility.
1996-10-20 16:00:14 +00:00
7133ecf2ca
Don't need to mark 0-NBPG as VM_PROT_NONE in kernel_map anymore; the
...
first entry is now properly setup in kmem_init().
1996-10-19 21:11:32 +00:00
7958973110
Set VM_MIN_KERNEL_ADDRESS to NBPG. This is a better way of getting
...
the kernel_map to treat page 0 properly.
1996-10-19 21:07:42 +00:00
e10e9e8455
Clean up the attach messages a bit.
1996-10-19 16:54:14 +00:00
cf9b36ab1d
Set up a kernel_map entry for the text segment with protection of
...
VM_PROT_READ|VM_PROT_EXECUTE. The previous default (VM_PROT_ALL)
would cause the following scenario:
- someone attempts to write kernel text (my test was writing
to an offset of /dev/kmem which was known to be in the text
segment, while in single-user mode).
- enter trap() with MMU fault (because of RO pte).
- trap() calls vm_fault(), which looks up vm_map_entry for
fauling address.
- vm_fault interprets write fault and VM_PROT_WRITE (in VM_PROT_ALL)
as COW; new page allocated, data copied to new page, new page
mapped in at trunc_page(<faulting va>).
- wow, look at the fireworks!
Fixes two potential symptoms:
- kernacc() returns TRUE when checking for permission to write
an offset in kernel text, which is bogus, since the text has
been mapped RO by pmap_bootstrap().
- Handling of a stray pointer that attempted to scribble into
kernel text would not be executed properly.
1996-10-19 08:51:33 +00:00
a6d9feb7a5
clean up chrtoblktbl, adding comments naming the devices which actually do
...
have entries in both device switch tables. Add 'st' entry to chrtoblktbl.
1996-10-18 21:26:57 +00:00
44365140cf
Severely clean up netisr handling. Clean up includes for netisr handlers.
...
Fix PPP netisr handling, add NATM netisr handling.
1996-10-18 20:35:23 +00:00
d1400746a5
Fix some printf formatting strings within DEBUG and DIAGNOSTIC defines.
...
From Mike Long, PR 2859
1996-10-18 09:03:42 +00:00
6126eea479
Tell the `upper half' of the VM system that page 0 isn't mapped. If we
...
don't do this, kernacc() will bogusly return TRUE for page 0, causing a
NULL pointer dereference in uiomove() when reading /dev/kmem.
Thanks to Scott Reynolds for noticing the problem.
1996-10-18 08:57:14 +00:00
150c33e60b
Use ${INSTALL}.
1996-10-18 05:55:26 +00:00
c9592404ce
Clarify the comment about enabling interrupts above level 11, suggested
...
by Andrew Gillham.
1996-10-18 01:36:16 +00:00
1f388af5cf
Fixed 4 compiler warnings about casts on insw() and outsw() calls.
1996-10-18 00:48:29 +00:00
6177bfa965
Remove compiler warning when USER_LDT not specified. PR 2852
1996-10-17 19:41:00 +00:00
3e338cbad4
Fix compiler warning (PR 2852)
1996-10-17 19:38:45 +00:00
f9a53c581f
Cast ioport_ex_storage to caddr_t, needed becauseit is now long[]
...
and creates warnings.
1996-10-17 19:31:09 +00:00
8f799be896
add a WEAK_ALIAS macro if building on an ELF-capable system, which creates
...
a weak alias for a symbol.
1996-10-17 18:33:53 +00:00
7e1b190155
Change Blizzard IV/1260/2060 to the name used by the driver.
...
While we're here, clean up a few other entries.
1996-10-17 15:49:39 +00:00
8f5996c976
Add driver bznsc (for BliZzard, New version: -IV, -1260, -2060).
...
Still untested on -1260/-1230, and hangs when enforcing SFAS_NO_DMA on 2060;
but works with DMA on the latter.
Still untested in a NetBSD-12A environment. (Sorry, don't have the hardware
myself.)
Thanks to Laurent Baroukh for being the guinea pig, and to Jerome Lovy
for forwarding the hardware information Phase V gave him, and to Phase
V for providing it.
1996-10-17 15:42:36 +00:00
2c65d27e6b
Forgot to "cvs add" this in the last:
...
Rename recently checked in KGDB to IPKDB to resolve conflicts with older KGDB
1996-10-17 12:09:05 +00:00
leo