59865f3154
Remove references to the "ahe" device, and add ahc at eisa. Lingering
...
junk pointed out by Greg Earle <earle@isolar.Tujunga.CA.US>.
1996-05-20 03:32:16 +00:00
d28f9a6699
Fix the last change; CVS apparently biffed it.
1996-05-20 03:23:36 +00:00
5e29c383e2
add wbflush() calls in strategic places. These really shouldn't be
...
here, and there should be a generic 'bus' interface to do memory
read/write barriers.
1996-05-20 03:14:07 +00:00
397617080d
add 'pseudo-device strip' for Metricom Ricochet packet radio driver
...
recently kicked in by Jonathan Stone. It compiles on the alpha, and
may even work.
1996-05-20 02:58:53 +00:00
daad29a36c
add fta, fpa, and fea drivers, for DEC TC, PCI, and EISA FDDI controllers.
1996-05-20 01:37:18 +00:00
d3ca12ac2a
import rd_root from sun3
1996-05-20 01:17:31 +00:00
39e3bbc016
add ram-disk. clean.
1996-05-20 01:16:50 +00:00
8a07a09d00
add "rd" ram-disk config
1996-05-20 01:15:45 +00:00
722d0da592
RCS Id police.
1996-05-20 00:56:39 +00:00
4564027c48
Add the DEFEA EISA FDDI controller to the catch-all kernels.
1996-05-20 00:50:33 +00:00
914ca91332
if booted from sboot, stay in it.
...
if booted from the bug, don't enter sboot.
1996-05-20 00:40:10 +00:00
9aa945f3c4
Also use genassym.c from sys/arch/mips/mips for make depend.
1996-05-19 22:44:12 +00:00
820895162d
Update for new grf attachment code.
1996-05-19 22:29:04 +00:00
d048582c60
New grf attachment code, mostly by Jason Thorpe with some cleanup by me.
...
This will allow dt and X to work with a generic kernel, rather than
compiling different kernels that attach grf0 to a NuBus adapter or
internal video.
1996-05-19 22:27:04 +00:00
17bc20b5a4
minor cleanups, mostly KNF.
1996-05-19 21:41:00 +00:00
260dba439d
Tuned in_cksum() from Matt Thomas <matt@3am-software.com>. According
...
to him, this implementation is approximately 50% faster than the
machine-independent portable version.
1996-05-19 21:24:14 +00:00
6f5bee3001
add -O2 to the optimization flags. A reason why optimization seemed
...
to fail on some systems was never found; hopefully it's gone away (or
was never really there).
1996-05-19 21:16:51 +00:00
30cec539a4
preserve sboot status
1996-05-19 21:07:21 +00:00
7212a830ea
- grf_cl.c, grf_clreg.h: added support for Piccolo SD64
...
- grf_cv.c, grf_cvreg.h, ite_cv.c: some cleanups
- grf_rh.c, grf_rhreg.h, grf_rt.c: new blank ioctl and some KNF
- grf_et.c, grf_etreg.h, ite_et.c: new graphics driver for et4000 based board
(oMniBus, Domino and Merlin)
- grfabs_cc: fix PR#2034
- grfvar.h: new grfunit for GRF_ET4000_UNIT
- scsidefs.h: no longer useful
- zbus.c: new entries for: Piccolo SD64, oMniBus, Domino and Merlin
1996-05-19 21:05:20 +00:00
f5faf322a0
GENERIC - added scsi scanner entry
...
- enable MS-DOS file system support
- removed unsed GRF_CL5426 entry
- added new graphics driver (grf6) for oMniBus, Domino and Merlin
1996-05-19 21:04:48 +00:00
68bbcedb0c
conf.c - added scsi scanner entry
...
pmap.c - -Wall fixes for MACHINE_NONCONTIG and M68040 || M68060
1996-05-19 21:04:18 +00:00
1bd6f1f147
We don't generally want to profile `genassym' (easy part of PR#2434).
1996-05-19 20:58:51 +00:00
208aa439bf
move rb_nosym/rb_sboot here
1996-05-19 20:08:55 +00:00
31a61aca69
minor clean
1996-05-19 20:08:15 +00:00
83f62ea033
Screenblank support:
...
- new fbio.h in arch/amiga/include, defining only FBIOSVIDEO
- add an IOCTL translation to arch/amiga/dev/grf.c
- add screenblank to the list of specials to build on amiga.
1996-05-19 20:06:02 +00:00
b416b21a6c
update for new (SRT0/bugcrt) calling convention
1996-05-19 19:58:41 +00:00
e086852f0c
minor clean up
1996-05-19 19:51:24 +00:00
1a41d54c27
Yet some more cleanup for missing prototypes, if DRACO is supported.
1996-05-19 19:03:01 +00:00
1cfab3321a
make dk_establish() return type be void, not int.
1996-05-19 18:49:33 +00:00
e6beb98351
Move sys/arch/pmax/dev/sccvar.h to sys/arch/pmax/tc.
1996-05-19 18:25:15 +00:00
7469cf4c88
Add port number encodings.
1996-05-19 18:24:33 +00:00
baa655bc0f
Update the DECstation stack-traceback pretty-printer, KN01 interrupt handler,
...
and IOCTL ASIC dma-buffer-reservation code to use the reorganized am7990
preprocessor tokens and function names.
1996-05-19 17:58:12 +00:00
6d5fbdfbe2
Remove common-across-all-MIPS-cpu definitions (e.g., user-level-visible
...
page/segment size definitions and macros) from pmax/include/param.h,
and move them to mips/include/mips_param.h.
1996-05-19 17:52:18 +00:00
1f9e095446
Remove common-across-all-MIPS-cpu definitions (e.g., user-level-visible
...
page/segment size definitions and macros) and move them to
mips/include/mips_param.h.
1996-05-19 17:48:04 +00:00
b6a3c3255f
Use genassym.c from sys/arch/mips/mips.
1996-05-19 17:17:48 +00:00
7cbd855ad6
Fixed all (proto)type errors. Fixes PR 2377.
1996-05-19 16:43:02 +00:00
f4c525a623
Update from Ken Wellsch.
1996-05-19 16:27:02 +00:00
6bd144b812
Add DZ-11 to GENERIC & files.vax.
1996-05-19 16:25:23 +00:00
aff9b08bf5
Delete unecessary #include of "le.h", which doesn't exist anymore.
1996-05-19 15:57:16 +00:00
e2a698293c
Add local declarations for locore functions. Fix pagemove() return
...
type to be void. Add explicit "int" return types.
Fix format/argument mismatches for vm_offset_t's in diagnostic messages.
1996-05-19 15:55:31 +00:00
a7a99df915
Some more Prototypes needed for DraCo support.
1996-05-19 15:35:43 +00:00
40c19a2309
Add some forgotten #ifdef M68060 to make gcc -Wall happy. While I'm here,
...
add the _kernel_text symbol for libkvm.
1996-05-19 14:55:27 +00:00
0e4623e2f7
set the console struct winsize to the values given in the prom (sun4c/sun4m)
...
or the eeprom (sun4) when opening the console. (note: sun4 code untested
but jason claims it will `Just Work').
1996-05-19 13:00:43 +00:00
a273dd586c
include $S/arch/m68k/060sp/Makefile.inc, similar to amiga.
1996-05-19 12:29:20 +00:00
30bc3379a6
'unlock' label is used for #ifndef DEBUG, my previous change
...
is bogus.
1996-05-19 12:20:54 +00:00
36a323b483
Added 'unlock' label for #ifdef DEBUG,
1996-05-19 11:37:20 +00:00
3a44d948a6
Another -Wall fix.
1996-05-19 09:13:56 +00:00
386ecdc658
Prototype dk_establish.
1996-05-19 05:34:25 +00:00
8d6d309bf0
Minor fixes from Matthias Pfaller.
...
ncr.c => add parity disable code.
1996-05-19 05:32:09 +00:00
4029840249
Ooops. cut 'n' pasto. splzs should 4, not 2.
1996-05-19 04:30:32 +00:00
a67936cc04
Declare mips_elf_makecmds(), not pmax_elf_makecmds().
1996-05-19 04:15:37 +00:00
fae3ba5c32
disable prom sync in romboot() and romhalt(), rather than before calling them.
1996-05-19 04:12:53 +00:00
2b1cdb9535
Include <machine/locore.h>, to force all MIPS cpu-model specific
...
locore calls to go via a locore-entry jumptable.
Use the mips/mips/mips_machdep.c code to initialize locore state,
exception vectors, and the locore entry vector, instead of doing
it all in mach_init().
Update dumpsys() to use new-style signatures for dump routines,
even though the pmax SCSI drivers don't actually support dumping kernel
memory.
1996-05-19 02:03:38 +00:00
bce6b88e9a
Include <machine/locore.h>, to force all MIPS cpu-model specific
...
locore calls to go via a locore-entry jumptable.
Cast the (int) arguments to MachTLBUpdateEntry() to avoid
warnings. Variables TLB entries are still type-punned as either structs
or ints, without any regard, when the pmax-specific VM code passes
them as arguments to functions.
1996-05-19 02:00:58 +00:00
6bb09a3781
Include <machine/locore.h>, to force all MIPS cpu-model specific
...
locore calls to go via a locore-entry jumptable.
Use mips_btop(), mips_round_page, mips_trunc_seg() instead
of pmax_btop(), pmax_round_page, pmax_trunc_seg().
Add Per's software-readonly-bit mechanism, since the r2000 and r4000
hardware TLB entries are very different, and the r4k has no space for
software bits in TLB entries. That is, this pmap code still won't work
on r4000 machines. Some other solution, like another jump table for
clients of the pmap code, is necessary.
1996-05-19 01:58:35 +00:00
b4c4b28e43
Include <machine/locore.h>, to force all MIPS cpu-model specific
...
locore calls to go via a locore-entry jumptable.
Declare r2000- and r4000-specific exception-handler functions, to which
trap() and interrupt() dispatch exceptions. Initialize r2000- and r4000-
specific exception-handler vectors, when CPU_R4000 and CPU_R2000 are
defined.
Update the stack-traceback code (partially) to understand and print
the new low-level exception-handler code, via which machine exception-vectors
send exceptions to call trap() or interrupt(). This needs more work.
1996-05-19 01:54:49 +00:00
a52871e690
Avoid calling autoconfigure() to configure the CPU.
...
It just causes a kernel panic, and will until the rest of the pmax
autoconfiguration is redone to use a bus-specific probe and attach
argument, or until KN01 devices are no longer attached to the mainbus.
1996-05-19 01:47:15 +00:00
a671ada4b8
Change block comment where each line began with "/*", to use the KNF
...
block comment style. Also passes gcc -Wall.
1996-05-19 01:44:45 +00:00
562ae556d9
Add closing-comments to commented-out #defines. to avoid -Wall complaining
...
about comments-inside-comments.
(The #defines for the IOCTL asic should arguably be mereged with
NetBSD/Alpha in any case.)
1996-05-19 01:42:54 +00:00
35050a83c5
Declarations for KN01 (Decstation/Decsystem 2100/3100) baseboard "bus".
1996-05-19 01:40:35 +00:00
5a890607de
Define the conventional pmax locore entry-point names to be calls through
...
an vector (struct) of function pointers. Add prototype declarations for
each vector entry.
Add declarations for the r2000 (MIPS-I) and r4000 (MIPS-III) locore
versions of the relevant functions.
1996-05-19 01:32:56 +00:00
7429b65f3c
Add declarations for the locore variables cpu_id and fpu_id, compatible
...
with the Pica r4000 locore. These variables are now used
by the cpu-identification routines in mips/mips/mips_machdep.c.
1996-05-19 01:28:47 +00:00
eaafcae007
Add prototyped declarations for the static bt431 chipset code.
...
Add explicit "int" return types to functions.
Change MachEmptyWriteBuffer() to wbflush().
1996-05-19 01:18:57 +00:00
cb77e53644
more cleanups for -Wall:
...
update the 4.3bsd/Ultrix-compatible qvss-style mmap'ed framebuffer/input-event
code to use mips_round_page() et.al., not pmax_round_page().
Add explicit "int" return types to functions. Add prototyped forward
declarations.
1996-05-19 01:16:18 +00:00
33fcef8a24
more cleanups for -Wall:
...
Fix the the definitions of dtop cdevsw entry point functions to match
their declarations. Add explicit "int" declarations to functions.
Add prototyped declarations for all local functions.
Return zero from dtopstop().
Include the external declarations from dtopvar.h.
1996-05-19 01:12:40 +00:00
fe392301cd
more cleanups for -Wall:
...
Fix the the definitions of cdevsw entry point functions to match their
declarations. Add explicit "int" declarations, and fix the type
of rconsmmap().
1996-05-19 01:06:14 +00:00
fe111dde22
more cleanups for -Wall:
...
Fix lk201 driver to include lk201var.h.
1996-05-19 01:03:00 +00:00
9bdcc60e97
more cleanups for -Wall:
...
Fix generic framebuffer (X-server interface) cdevsw entry points to match
declarations.
1996-05-19 01:01:10 +00:00
50dd608c3b
more cleanups for -Wall:
...
Fix dc driver cdevsw entry points to match declarations.
Change MachEmptyWriteBuffer() to wbflush().
1996-05-19 00:58:03 +00:00
153ec93cf9
Create device-driver external declarations for the following pmax drivers:
...
lk201 in-kernel keyboard decoder (lk201var.h)
1996-05-19 00:53:43 +00:00
cce901c20c
Create device-driver external declarations for the following pmax drivers:
...
qvss/pm-compatible framebuffer ioctl()s (qvssvar.h)
MAXINE desktop bus driver (dtopvar.h)
3100/2100 pm framebuffer low-level driver ( pmvar.h)
MAXINE baseboard framebuffer (xcfbvar.h)
which should compile with -Wall.
1996-05-19 00:48:43 +00:00
d292da40b2
Remove obsolete HWTOSW/SWTOHW macros.
...
VA2PA: flush TLB before proceeding with L2 probe (per the manual) [4m].
More KNF.
1996-05-19 00:32:15 +00:00
0064a12f68
Create mips_machdep.c, which contains Mips-specific functions common
...
to all mips ports.
So far, this consists of code to initialize a vector, or jump-table, of
pointers to locore functions that require different definitions on different
Mips CPUs (eg., r2000/3000 and r4000); a generic wrapper for setting up
CPU-specific exception vectors; and CPU and FPU identification code.
1996-05-19 00:31:57 +00:00
98a9570a8e
Make sure DELAY(0) returns within an hour..
1996-05-19 00:25:16 +00:00
503d421a0a
Add alternate "mips_r2000_<XXX>" entry points for the r2000/r3000-specific
...
locore functions. The new names are used by C code to construct a jump-table,.
making it less infeasible to have a single kernel image work on both
r3000 and r4000 systems.
1996-05-19 00:25:14 +00:00
f969979dea
Back most (not all) of the previous delay-related changes now that
...
delay is calibrated properly.
1996-05-18 23:56:59 +00:00
62f7f3ad57
Implement a real delay calibration routine, adapted from Chuck Cranor's
...
mvme68k delay calibration algorithm.
1996-05-18 23:30:09 +00:00
2635a9c602
Serial driver with interface to a slightly modified version of the machine-
...
independent z8530 driver. When that driver is updated, the local copy
of those files may be removed. From Bill Studenmund.
Compiler warnings fixed by me.
1996-05-18 18:53:50 +00:00
78c78f916e
Fixup a few prototypes and put 'em in their place.
1996-05-18 18:52:41 +00:00
8c29c79939
- remove cpu_exec_prep_oldzmagic and use exec_aout_prep_oldzmagic
1996-05-18 16:01:00 +00:00
52d3532adb
- remove cpu_exec_aout_prep_oldzmagic and use exec_aout_prep_oldzmagic
1996-05-18 15:58:07 +00:00
15ac7da805
- remove cpu_exec_aout_prep_oldzmagic and use exec_aout_prep_oldzmagic
...
- add exec_aout_prep_oldnmagic and exec_aout_prep_oldomagic. Now we support
all BSDI executable formats.
1996-05-18 15:54:59 +00:00
9ce523cca7
disable the prom `sync' command before calling romboot() or
...
romhalt() (idea from OpenBSD).
1996-05-18 12:36:49 +00:00
4cba75e24a
put promdev definition into <machine/bsd_openprom.h>.
...
also, minor KNF.
1996-05-18 12:35:18 +00:00
b6988904e0
put promdev definition into <machine/bsd_openprom.h>.
1996-05-18 12:27:40 +00:00
d7bc39fad1
don't set tmp twice.
1996-05-18 12:22:49 +00:00
68b2ff1bdb
use __P
1996-05-18 12:19:14 +00:00
a8c7148dd2
XXX set up alldevs and allevents so that vmstat -i will work.
1996-05-18 01:39:57 +00:00
63f4ec3e41
Put the vector table back in the text segment; putting it in the data
...
segment breaks doboot() on my 319 (but worked on my 380...bleh!)
1996-05-18 00:52:53 +00:00
4145f89f54
TurboChannel bus_mem_* functions. bus_mem_{read,write}_8, and
...
bus_mem_read_{1,2} are not yet supported for sparse space.
1996-05-18 00:00:51 +00:00
0307c36933
bus_io_* functions. These have no meaning on the TurboChannel, since
...
it's a memory-mapped bus and has no I/O space. They all are
fancy wrappers around panic().
1996-05-17 23:59:31 +00:00
84b37ec80d
set up a bus_chpiset_tag_t, and pass it to the TC code
1996-05-17 23:58:43 +00:00
e49dcae424
add files for the implementation of the TC 'bus' mem & I/O functions
1996-05-17 23:44:02 +00:00
a78f16f702
moved to ../tc
1996-05-17 23:41:36 +00:00
da5c96baa1
Correct an oversight and a silly past-o in last change.
1996-05-17 22:54:40 +00:00
a1ac79c69f
Added r_neg bit and removed r_copy bit from relocation_info_arm6 structure.
...
General tidy up of the code style in file.
1996-05-17 21:58:07 +00:00
6d472208c0
bump
1996-05-17 21:20:11 +00:00
056791c7fa
sync with openbsd. [includes if_ie made to work on 16x by Theo de Raadt]
1996-05-17 21:18:07 +00:00
bd3c8260d8
sync with openbsd. [includes if_ie made to work on 16x by Theo de Raadt]
1996-05-17 21:17:58 +00:00
3df32569f8
Makefile: update from OpenBSD
...
boot.c: update from sun3 port, with changes for my new boot code put in.
conf.c: config from openbsd, by Theo de Raadt
dev_net.c: update from openbsd (standard dev_net with changes from theo)
dev_net.h: proto from openbsd
1996-05-17 21:08:25 +00:00
d14981d7b7
bugdev.c: from Dale Rahn (bug device access)
...
exec_mvme.c: from sun3 port, adapted by me. I also fixed a bug that
prevented ZMAGIC kernels from running.
libsa.h: new file by me
parse_args.c: by Theo de Raadt from OpenBSD with slight revisions from by me
to make it fit the new format.
1996-05-17 20:59:53 +00:00
23ee5c7500
replace with code to use libbug rather than access directly
1996-05-17 20:54:50 +00:00
86a71fe9e7
complete revise of sun3 SRT0 so that it works with bugcrt by me.
1996-05-17 20:53:49 +00:00
3430ad6211
update for my reorg
1996-05-17 20:52:37 +00:00
d2da5a2153
remove files no longer needed due to reorg.
1996-05-17 20:49:23 +00:00
36079d8909
update for new boot stuff
1996-05-17 20:45:48 +00:00
75dfdfdab4
bootxx: import from sun3 port, adapt to mvme68k by me.
1996-05-17 20:11:31 +00:00
05379d078e
Add `_kernel_text' symbol for kvm_mkdb(8).
1996-05-17 20:07:53 +00:00
ccc9ad0d6c
fix comment
1996-05-17 20:07:36 +00:00
62a58e8eaa
bootst: from Dale Rahn.
1996-05-17 20:06:45 +00:00
008b8c0664
bootsd: import from sun3 port, adjust for mvme68k port by me
1996-05-17 20:04:46 +00:00
bee8cda103
installboot: from sun ports
1996-05-17 20:00:52 +00:00
671b4023a4
wrtvid by Dale Rahn.
1996-05-17 19:58:53 +00:00
89a5edba69
prtvid (print out a VID block). by Dale Rahn.
1996-05-17 19:54:57 +00:00
94e848e819
update for libbug.h, console I/O
1996-05-17 19:50:10 +00:00
a48f9896dd
fix -I
1996-05-17 19:43:48 +00:00
a0d3ad800b
Add the version line.
1996-05-17 19:39:30 +00:00
71c9b6faad
pull in a set of changes I forgot to include in initial version
1996-05-17 19:37:59 +00:00
50ecbc1c84
Rename cs_pclk_div16 to cs_brg_clk to clarify the fact that the
...
Baud Rate Generator (BRG) clock is not necessarily PCLK/16.
1996-05-17 19:32:06 +00:00
eabb97da52
libbug from Dale Rahn. Revisions by Theo de Raadt and myself.
1996-05-17 19:31:46 +00:00
1bd98e4d83
bugcrt from Dale Rahn. With modifications from myself and Theo de Raadt.
1996-05-17 19:26:43 +00:00
eda3fcd053
fix declaration of main()
1996-05-17 18:29:41 +00:00
d9277a9036
Add Sun4m power0 power status/control register to GENERIC configuration
1996-05-17 18:02:56 +00:00
04241dc8eb
Add _kernel_text.
1996-05-17 16:38:24 +00:00
03fc26050d
Put the vector table _after_ the temp stack.
1996-05-17 16:32:28 +00:00
d7ef096470
Probe for both Atomwide and ANT ether3 podules.
1996-05-17 16:24:03 +00:00
8a9255ea4b
Recognise ANT ether3 podules.
1996-05-17 16:17:21 +00:00
503413590e
Changes for the new delay() function.
1996-05-17 15:38:08 +00:00
91cb72e7ea
remove the now unused MHz constants, add a declaration for vectab[],
...
and document some globals.
1996-05-17 15:37:07 +00:00
a5d6cd3a32
Move the vector table to the data segment.
1996-05-17 15:33:52 +00:00
d845719070
Add a new function, hp300_calibrate_delay(), which sets the delay constant
...
based on a model's known CPU speed. cpuspeed value is now in MHz
instead of (MHz / 8).
1996-05-17 15:32:26 +00:00
33e1caaf99
Couple of changes:
...
- New delay() function, modeled after sun3/mvme68k delay,
calibrated with a model's known cpu speed.
- Use the defined constants for machineid and ectype
when determining what kind of machine we have, rather
than their expanded equivalents, for clarity.
- Move the vector table to the data segment so that it
can be patched at run-time.
1996-05-17 15:27:26 +00:00
bbc04e2011
Define the machineid and ectype constants.
1996-05-17 15:20:55 +00:00
b20981c51d
Remove cpuspeed from here.
1996-05-17 15:19:02 +00:00
3ad552e74b
Adjust for new DELAY() ... s/DELAY(1)/DELAY(5)/ and lengthen some
...
timeouts.
1996-05-17 15:15:29 +00:00
c3fc839395
Change "DELAY(1)" to "DELAY(5)". This is basically equivalent to how
...
the old implementation of DELAY() behaved with small values.
1996-05-17 15:12:30 +00:00
f708ced3a3
Adjust for the new values of cpuspeed.
1996-05-17 15:09:39 +00:00
be71c11843
Add 2 missing ";"s ... they weren't noticed before because of the
...
old implementation of DELAY().
1996-05-17 15:08:13 +00:00
0ffd802ca1
Make "options DRACO" kernels boot on Amiga mainboards, too:
...
- don't change the _lev2intr and _lev6intr entry points in static code
- set the level 2, 5, 5 and 6 interrupt autovectors from initcpu() on DraCo.
1996-05-17 12:56:49 +00:00
6cab72d789
Add a "_kernel_text" symbol, for libkvm. From Gordon Ross.
1996-05-17 12:22:22 +00:00
c2af4f7f17
add 'kernel_text' symbol, for use by kvm_mkdb
1996-05-17 11:00:45 +00:00
0b05acfe0a
add _kernel_text
1996-05-17 04:38:02 +00:00
e9d5ab8b3a
Set _kernel_text as recommended by Gordon--set before vector table.
1996-05-17 02:11:47 +00:00
7d279a797f
Add a "_kernel_text" symbol, for libkvm. From Gordon Ross.
1996-05-16 23:53:10 +00:00
2d2098c11b
Check for `configuration parent' differently: compare against "sbus"
...
rather than "ledma".
1996-05-16 22:57:32 +00:00
93bc248f7c
add 'kernel_text' symbol, for use by kvm_mkdb
1996-05-16 22:54:30 +00:00
b9f70e90d8
Add `flags' to the esp entries: disable disconnect & synch negotiation
...
by default until further notice.
1996-05-16 22:47:47 +00:00
e509f9aaeb
Change attributes of `dma', `espdma' and `ledma' (the attributes on the latter
...
two didn't seem to make much sense anyway..) to allow `esp' devices to be
attached to one of `sbus', `dma' and `espdma'.
Remove the wildcarded `espdma?' and `ledma?' attachments of `esp' and `le'
respectively, in favour of `dma?' and `lebuffer?' (but the latter is not
yet implemented), which seems to better match reality: additional SBus
SCSI/Lance boards call themselves `dma' and `lebuffer'.
1996-05-16 22:38:04 +00:00
3f1283a92f
Re-arrange code that looks for the esp driver to allow for the fact that
...
any "dma" device (i.e. not just "espdma") can have an OBP child. This is
the case with (at least some) SBus SCSI boards.
1996-05-16 21:45:35 +00:00
50e92fd71d
Use configuration file flags to disable reselection and/or sync negotiation,
...
on a per target basis (until the driver can sort things out on its own).
Test against "sbus" in stead of "espdma" to find out where in the
configuration tree we are: an esp can be the child of a "dma" on SBus
add-on boards.
1996-05-16 20:31:28 +00:00
16465b6509
merge.
1996-05-16 20:18:01 +00:00
c4b5129d5d
Add edahdi to the subdirs.
1996-05-16 20:03:53 +00:00
9e086936f3
Remove files commited in the wrong directory. Sorry.
1996-05-16 20:02:33 +00:00
15f7f8dcfd
edahdi, an AHDI partition-id editor
1996-05-16 19:51:25 +00:00
4a03434386
Increased delay time while waiting for acknowledgement following the
...
sending of a keyboard reset code. This fixes a problem on some machine
where the reset code ends is a long loop continually trying to reset the
keyboard.
1996-05-16 19:32:25 +00:00
0b59ea6fbd
Replace a couple of (*foo_p)()'s with direct calls. All instances occurred
...
within in functions that were already mmu-arch specific.
Some formatting nits.
1996-05-16 19:19:33 +00:00
525cc1eebc
Fixed the printing of the podule description from the chunk directory
...
for unrecognised podules.
1996-05-16 19:05:35 +00:00
a9bd225c1c
Remove duplicate definitions of the "le" device .. "oops"
1996-05-16 19:00:06 +00:00
0d476cb7d0
bus memory and I/O space access functions/macros, to be used by
...
machine-independent code for more sane access to bus resources.
Defines:
bus_{io,mem}_{map,unmap}
bus_{io,mem}_{read,write}_{1,2,4,8}
bus_io_{read,write}_multi_{1,2,4,8}
functions, and several types to go with them.
Note: The bus_io_*_8 functions are not supported.
1996-05-16 18:08:40 +00:00
7e8ebd0628
add code so that we can generate a valid disklabel without help from
...
wrtvid.
1996-05-16 17:59:57 +00:00
0f68df580b
import Theo's prom.h from OpenBSD. includes my recent changes.
1996-05-16 17:55:54 +00:00
6c21c38077
add some comments to explain what is going on here
...
also add enough info to enable the kernel to create
a valid disklabel without help from wrtvid.
1996-05-16 17:52:51 +00:00
d0bd068b17
cleanup comment.
1996-05-16 17:52:22 +00:00
ee807dac4c
Correct a -Wall correction.
1996-05-16 17:50:25 +00:00
f38ec079c3
Removed definitions of mouse buttons. These should be obtained from
...
iomd.h and do not need to be duplicated here.
1996-05-16 17:45:10 +00:00
eced298a2b
- tell new version of assembler to still accept 851/030 opcodes when compiling
...
with -m68060
- add -Wall -Wstrict-prototypes
1996-05-16 17:07:08 +00:00
d3ad3efef5
3 more constants for 68060 access error trap stack frames.
1996-05-16 16:51:30 +00:00
9546c59d96
Only declare setconf() #ifdef GENERIC.
1996-05-16 16:10:11 +00:00
a104ff9340
spl0 prototype.
1996-05-16 16:03:35 +00:00
d5793c310d
add DCIA prototype.
1996-05-16 16:02:15 +00:00
347edbdf91
fixed gcc -Wall warning.
1996-05-16 15:57:32 +00:00
4bbf23d04c
Copyright police (s/Harvard University/Harvard College/).
1996-05-16 15:56:54 +00:00
5b2b46b306
Fix for unused var warnings in compiler problem workaround.
1996-05-16 15:53:02 +00:00
3b8b982891
Naive translation of text to assembler had caused some assembler syntax
...
errors. Fixed them. Thanks to Bernd Ernesti for the early report.
1996-05-16 15:37:49 +00:00
fe454d89f3
Implement a hack to give pmap a better chance of working on SS10's with
...
no external L2 cache.
XXX this is ugly and will go away when cpu_softc gets done for the 1.3 release
Also, copyright police (s/Harvard University/Harvard College/).
1996-05-16 14:30:54 +00:00
81ba0732e0
Document the "flags" for the si and sw controllers. While I'm here,
...
do some re-arrangement (cleanup), and document which devices exist on
which machines, so that people can be better informed when they trim
down their kernels. There are a LOT of comments in this file now!
1996-05-16 03:13:27 +00:00
81b0485bfe
These haven't been kept up to date.
1996-05-15 23:57:50 +00:00
5179f14567
This hasn't been kept up to date.
1996-05-15 23:52:44 +00:00
31526bc8e8
These haven't been kept up to date...
1996-05-15 23:50:30 +00:00
8fea0bb1e5
fix typo
1996-05-15 21:16:44 +00:00
317ba427c1
Now that we imported the 68060 software support package and committed the
...
glue code for it, activate this again.
1996-05-15 21:10:57 +00:00
89e428b280
Initial commit of the machine independend part of the glue code for
...
the 68060 software support package.
1996-05-15 21:06:18 +00:00
0a68161069
RCS ID police
1996-05-15 19:47:31 +00:00
508069c020
Initial import of the Motorola M68060 Software Package Production
...
Release, revision P1.01.
1996-05-15 18:17:45 +00:00
34a55c3e59
fixed gcc -Wall warning.
1996-05-15 16:12:48 +00:00
4001987d06
Make a BOOTX(tra) config file. It suits more people than BOOT and it allows
...
me to keep the BOOT config small.
1996-05-15 12:57:32 +00:00
b4ca145026
Get in sync with the mac68k version of the 5380 driver. Also increase
...
the maximum values of wait_req_xx() functions so some old (slow) scsi-1 drives
will work.
1996-05-15 09:21:29 +00:00
b0db2f6250
French keyboard map (Cedric Moreau).
1996-05-15 09:15:14 +00:00
be7b319e1b
Fix "might be used uninitialized" warnings.
1996-05-15 07:31:55 +00:00
dd8fd30935
Prototype + -Wall fixes.
1996-05-15 07:28:51 +00:00
df57030b9c
Add register use constraints to a bunch of asm() statements.
1996-05-15 03:23:10 +00:00
1350f9fb7d
print the failure if we do not correctly determine the amount of RAM
...
on the ethernet card.
1996-05-15 03:20:22 +00:00
65b1980d5a
Invalidate the pte for the peeked va in bus_peek().
1996-05-15 02:51:00 +00:00
22637072e3
Set mac68k_vidphys outside of get_mapping() so the II and others will
...
get the default value correctly.
1996-05-15 02:34:33 +00:00
9ad87ec76e
remove some RCS id's we don't need.
1996-05-15 02:13:39 +00:00
16b514adc6
KNF some debug statements.
1996-05-14 13:57:29 +00:00
5f0e599c40
Remove a line of debugging code.
1996-05-14 10:25:01 +00:00
de6b7f34fc
Make dk_establish() a void function.
1996-05-14 10:23:29 +00:00
c1381aa33f
Document some more interesting options.
1996-05-14 10:21:48 +00:00
1dd829a703
Update to make this work correctly when using an obj-directory.
1996-05-14 10:16:13 +00:00
df2dde6eb0
Some updates from Bob Nestor <rnestor@metronet.com> to get the Performa 550
...
working again. I broke it when I moved the ROM mapping so it was no
longer mapped on a friendly address boundary. Some cleanup.
1996-05-14 04:00:48 +00:00
ce096d50d5
Add a short comment.
1996-05-14 03:57:32 +00:00
ebafcd57c2
Remove some comments in eeprom_uio() now that they're no longer relevant.
...
Add some whitespace to eeprom_take().
1996-05-13 21:39:53 +00:00
b3d8a261b9
Make imask[] larger, to match other changes.
1996-05-13 06:11:28 +00:00
1a79065f9f
Enable DMA by default on the 4/100 "sw" controller; the DMA bugs appear
...
to have been fixed.
1996-05-13 01:53:45 +00:00
635c72115c
Add multiple-inclusion protection.
1996-05-13 01:35:06 +00:00
417bb90896
Move spl*() and soft interrupt definitions into intr.h. For now, include it
...
from psl.h. XXX Will change after release.
1996-05-13 01:28:01 +00:00
db4ceee7f8
Remove the PCVT_SLOW_INTERRUPT option. It is required.
1996-05-12 23:33:32 +00:00
f7624a5fd1
Use intr.h.
1996-05-12 23:24:47 +00:00
eda98d375d
Use intr.h.
1996-05-12 23:11:54 +00:00
a8e2ce97e4
Implement IPL_HIGH.
1996-05-12 23:06:06 +00:00
9f8f77f8f6
Move IPL_* and IST_* constants into intr.h.
1996-05-12 22:52:23 +00:00
cf31abcc16
Minor changes to the configuration of some devices.
1996-05-12 21:54:37 +00:00
b7105daa51
Updated boot0() to leave the processor in 32 bit data/address space mode
...
when jumping back into the ROM at 0x00000000.
1996-05-12 21:54:05 +00:00
db208e96e3
Addition of configuration file for RC7500 development board.
1996-05-12 21:49:01 +00:00
169f7f2a06
Fixed the vt220 printing bug.
...
Fixed the 'loss of console output while X is switched in' bug.
1996-05-12 21:42:44 +00:00
8a3097c984
Fixed panic strings with %i in them where it should have been %s.
1996-05-12 21:40:21 +00:00
6ad1b0f567
Added the es ethernet driver.
1996-05-12 21:37:47 +00:00
95ee0f849a
Initial commit of the SMC91C9X ethernet driver found on RC7500
...
motherboards.
1996-05-12 21:35:07 +00:00
05ae98d7ed
Fixed the order of the machine includes.
1996-05-12 21:33:18 +00:00
0efacab0e1
Removed some lurking experimental code that does not work relating
...
to CDROM devices.
1996-05-12 21:30:15 +00:00
267415c841
Define FLT_ROUNDS properly. Guard #defines with #ifndef / #endif
1996-05-12 21:27:52 +00:00
62b52adc0e
Definitions of various contants and types for arm32 IEEE float point.
1996-05-12 21:26:20 +00:00
afed73e5a8
fixed for gcc -Wall warning.
1996-05-12 20:49:57 +00:00
611a9dc5c7
x68k mouse has no hardware flow control.
1996-05-12 20:46:33 +00:00
645664c6f1
In bus_mem_unmap(), pass kernel_map to kmem_free(), rather than
...
kmem_map (the VA space is allocated from kernel_map).
In both bus_mem_map() and bus_mem_unmap(), adjust some arithmetic to
avoid wasting a page of VA space per call to bus_mem_map().
1996-05-12 19:02:19 +00:00
e64215c6f4
Oops, I accidentally commented out the "le" attach directive. Thanks,
...
veego!
1996-05-12 16:17:19 +00:00
2a8a23a622
Disable .include of arch/m68k/060sp/Makefile.inc for now.
1996-05-12 13:36:02 +00:00
70b7922d41
Use new format for dumpfile and include chip memory in dump.
...
Fix another -Wall warning (from '060 integration).
1996-05-12 04:10:15 +00:00
8afe5318ba
Used by the new libkvm and kernel coredump.
1996-05-12 02:47:46 +00:00
b3186217c2
Use dumpconf() to set dumplo instead of directly setting it.
1996-05-12 02:41:00 +00:00
177ffe3ea4
Fix yet another -Wall warning.
1996-05-12 02:38:23 +00:00
caf4c8f158
Remove old-style disk instrumentation now that iostat, systat, and
...
vmstat are fixed.
1996-05-12 02:26:03 +00:00
ea8aad3319
Use <machine/bus.h> ... on the right track to making this an MI driver.
1996-05-12 01:37:02 +00:00
540f9550c0
Make `make depend' work for libraries.
1996-05-11 16:11:30 +00:00
468b8f30c6
Get rid of the NuBus Superspace kludge--it should no longer be necessary
...
or even desirable.
1996-05-10 20:53:31 +00:00
d6ea9eae71
Cleanup the mess I left when committing yestereve's changes; in this case,
...
an unused variable.
1996-05-10 15:36:05 +00:00
e138ae4f38
Clean up the mess I left over from my yestereve's commit: partially unused
...
variables left over from color background debugging, partially wrong #ifdefs
making some variables unused in non-M68060 kernels.
1996-05-10 14:30:53 +00:00
93b32419b8
Back out last change, which was caused by a wrong way merge at home.
...
Sorry for the inconvenience.
1996-05-10 13:02:33 +00:00
82b89f1181
Finally convert the pv_entry allocation to match the hp300 pmap.c.
...
This should reduce the possibility of a panic when unable to allocate
a new pv_entry under low memory conditions.
Changed a couple of kmem_free() calls to kmem_free_wakeup() as in the
hp300 pmap.c.
-Wall cleanup: unused variable when M68060 not defined.
1996-05-10 01:47:45 +00:00
3393d0e53b
a few more minor ecoff-header-related tweaks.
1996-05-10 00:15:04 +00:00
56017a3c1e
update to include <sys/exec_ecoff.h>, rather than the alpha-specific
...
(and redundant) coff.h file (which has now been removed).
1996-05-09 23:54:07 +00:00
491ab6c2ed
remove redundant header, now that ECOFF_SEGMENT_ALIGNMENT macro for
...
<sys/exec_ecoff.h> is fixed.
1996-05-09 23:52:19 +00:00
d5b0482bb9
update for changed ecoff headers. minor consistency changes for the
...
ecoff functions, as well.
1996-05-09 23:48:47 +00:00
2daf9d8f3b
change structure member names to be in line with what various ECOFF
...
documentation I have calls them, and update for new definitions in
sys/exec_ecoff.h. Also, fix ECOFF_SEGMENT_ALIGNMENT macro so that it
actually returns the right alignment.
1996-05-09 23:47:25 +00:00
b10c43013d
change structure member names to be in line with what various ECOFF
...
documentation I have calls them, and update for new definitions in
sys/exec_ecoff.h.
1996-05-09 23:46:18 +00:00
6bd0d2c7eb
Prototyping-related changes I missed the last time, from Thorsten
...
Frueauf. Closes PR 2378.
1996-05-09 21:26:08 +00:00
a7b314774d
doboot() takes no arguments (from Thorsten Frueauf)
1996-05-09 21:17:04 +00:00
dedd4cceab
Fix typo, noticed by Curt Sampson <curt@portal.ca>.
1996-05-09 21:15:47 +00:00
2de85463e2
Correct typos, PR #2382 .
1996-05-09 21:11:47 +00:00
3482bd961d
shift code a bit to move "start" to the front of .text [using openbsd ordering]
1996-05-09 21:09:14 +00:00
f6ab1073c8
First part of M68060 and DraCo support.
...
* for the M68060 part: store buffer and branch target cache aren't
enabled yet (this needs cleanup of lots of locore.s code which is a
maze of little passages, all a little different) (and it wasn't yet
tested in an accellerated Amiga, only in the DraCo).
I've included a workaround for 2 of the CPU bugs in chips with Masks
1F43G and earlier, but didn't bother to deal with the can of worms
in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more
reported at kernel startup time, or at least mention it (or the mask
revision, if available) when reporting problems.
* for the DraCo: only machines with a CIA timer.
I assigned machine id 32000+nn (0x7Dnn), where n is the machine
readable Quicklogic custom chip revision (also printed at boot
time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't
guaranteed to have any CIA (we don't have a driver for the new timer
yet).
Supported are:
- MF-II keyboards on the native interface and A3000 keyboards via
the CIA.
- builtin SCSI interface (yet another instance of siop)
- CIA timer.
- Zorro II devices which don't do DMA (don't get mapped to Zorro II
address space in the DraCo)
- "local bus" devices which are autoconfigured by the boot rom
(should be all); only an Altais driver is there (looks like a Retina Z3)
Not yet supported are:
- native timer of newer machines.
- Real Time Clock.
- serial, parallel + floppy on the SuperIO chip (that is also: no mouse)
XXX You need an enhanced boot loader, which will committed in a few days.
XXX std.draco should and will go away.
1996-05-09 20:30:30 +00:00
4781b7d291
binary file. (PR#2383)
1996-05-09 16:11:56 +00:00
8eddcbfbd2
Added needs-flag to the podulebus driver.
...
Tidied up the file a bit and added some extra comments.
1996-05-09 14:03:18 +00:00
0edf3579f4
Revert last change.
...
Changing types from unsigned {long,short} to u_int{32,16}_t causes problems
in a lot of userlevel code because those types aren't defined when machine/
endian.h is included. And IMO including sys/types.h in machine/endian.h
is clearly wrong.
XPG4.2 defines new types in_addr_t and in_port_t for the {h,n}to{n,h}{l,s}
functions. But we don't have time to figure out the implementation issues
given the current release schedule.
1996-05-08 20:00:38 +00:00
5b680d94ba
Make this compile if DEBUG is defined.
1996-05-08 15:14:53 +00:00
e93e429cc5
Note that rtclock_intr() could be tweaked, but why it isn't.
1996-05-08 15:13:22 +00:00
8321085213
Minor fix to last patch--from Taras.
1996-05-08 13:36:41 +00:00
fe4b70fd58
RCS id police.
1996-05-08 05:55:04 +00:00
2b2cd22c69
Minor update from Taras Ivanenko <ivanenko@ctpa03.mit.edu>.
1996-05-08 04:00:44 +00:00
99e86ac209
Remove some gross hacks that were added due to interrupt grossness that
...
has been partially fixed. Also, add a new flag (which rearranges them
a bit, unfortunately) to use PDMA for polled transfers.
1996-05-08 03:44:56 +00:00
a6ac580ad1
don't assume MAXPARTITIONS is 16.
1996-05-08 01:45:46 +00:00
bfd10277d3
Wrap rtclock_intr in splclock()/splx() to make sure that hardclock is running
...
at splclock. Passed along from Gordon via Scott.
1996-05-08 01:08:48 +00:00
bcdf813a97
Initial cut at some ROM entry points for the MacTV.
1996-05-08 01:06:31 +00:00
d8c7327dd3
Fix typo.
1996-05-08 00:15:48 +00:00
3b6dd2f647
change maxpart to 8 to be compat with prev binaries
1996-05-07 23:23:34 +00:00
40454f9798
A MacTV owner says that the MacTV is a repackaged Performa 550. Note this.
1996-05-07 21:21:11 +00:00
779d7709c5
Separated mouse initialisation code out into a separate function.
...
Added a watchdog timer to reset to reinitialise the mouse if it dies.
1996-05-07 21:04:08 +00:00
09aabb30f7
Merged in changes from the isa wd driver.
1996-05-07 21:00:09 +00:00
652b291390
- Rewrite scrollup(), scrolldown(), and clear_screen() to move/clear only
...
visible screen memory. This results in a considerable performance win
at all depths.
- Correct clear_screen() behavior when clearing to the top and bottom of
screen; start at current cursor position, not current cursor row.
- Add local prototypes, and other KNF.
1996-05-07 15:52:19 +00:00
38b11e7c82
Get rid of some old, now meaningless macros.
1996-05-07 03:13:40 +00:00
8ed57c561e
Clean up an error printf() and use proper macro.
1996-05-07 03:12:12 +00:00
42cbc82043
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_reset)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 02:35:07 +00:00
f56c26b14e
No mac has a VAC.
1996-05-07 01:45:22 +00:00
69351e2be6
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:35:48 +00:00
0584bf86a8
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:32:31 +00:00
eadc4bd43f
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
1996-05-07 01:30:18 +00:00
ac9df157aa
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:28:28 +00:00
ae87feee24
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:27:26 +00:00
0e0d4f1ec2
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
1996-05-07 01:24:48 +00:00
c3c4b6f9f3
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:23:31 +00:00
b97689cdfb
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
1996-05-07 01:16:36 +00:00
ccc18dd2ae
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:12:53 +00:00
2dea8dc101
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:10:53 +00:00
6de4db6bbc
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:08:15 +00:00
3fd8e58e67
Add the DEC DEFPA FDDI interface to the catch-all kernel configs.
1996-05-07 00:59:53 +00:00
a331638311
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
1996-05-07 00:58:36 +00:00
7ebfa3c7fc
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 00:57:58 +00:00
090191b3aa
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
1996-05-07 00:56:51 +00:00
748810b06d
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 00:46:37 +00:00
17033bca9c
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 00:35:07 +00:00
c98492db67
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
1996-05-07 00:34:17 +00:00
fe64460341
*** empty log message ***
1996-05-07 00:33:35 +00:00
af19dd53a3
This code has not been used in ages and there are at least 2 better 5380
...
drivers in the tree, now.
1996-05-06 22:34:09 +00:00
1d8ac2ad92
Update to something closer to the atari port.
1996-05-06 22:26:26 +00:00
0f9ef81648
Fix "prototype disagrees about inline" error.
1996-05-06 20:05:24 +00:00
aef8f5c3bb
Update for renamed sbc driver files
1996-05-06 06:40:03 +00:00
c846476845
Update several comments.
1996-05-06 06:19:33 +00:00
18021dad20
Move grf0 at obio? from std.mac68k to the config files. Not all machine
...
have internal video.
1996-05-06 03:33:06 +00:00
03a7fd15ca
grf0 -> grf*
1996-05-06 03:32:33 +00:00
314dd5b20b
Set sc_slot--we need it later.
1996-05-06 03:27:20 +00:00
6026c5dfd7
Ooops. Remove debugging printf().
1996-05-06 03:27:06 +00:00
042a16abd0
Add 1 page slop to the video length. Only reset mac68k_vidlog if non-zero.
1996-05-06 03:25:40 +00:00
db495102be
Do not depend on the nubus being mapped in one huge segment.
1996-05-06 01:08:24 +00:00
1b475d6b74
Do not print out the nubus ranges. We only use them for finding wierd
...
internal video locations. Perhaps we can get rid of that in the future,
too.
1996-05-06 01:06:57 +00:00
333d8a1deb
Do not allocate NuBus space at boot time. Do allocate enough space for
...
the console video, though.
1996-05-06 01:04:58 +00:00
f194862b11
Updated declaration of dk_establish() to match prototype.
1996-05-06 00:57:10 +00:00
928d9a1842
Fixed compiler warnings generated with -Wall.
1996-05-06 00:52:35 +00:00
dbf4689e65
Fixed -Wall compiler warnings.
...
Implemented ESC [g sequence.
1996-05-06 00:47:20 +00:00
2dd637939f
Fixed VIDC register setup for RC7500 boards.
1996-05-06 00:45:09 +00:00
3f91443b0b
Added __noreturn__ attribute to boot0().
1996-05-06 00:41:55 +00:00
5b6948449b
Commented out the vm_map_remove from cpu_exit() as this appears to be
...
done in the exit1() function in kern_exit.c
1996-05-06 00:41:32 +00:00
6417430844
Fixed -Wall compiler warnings.
1996-05-06 00:37:13 +00:00
d0e2e6de12
Don't try and idle a ARM7500 if targeting a RC7500 board as power
...
down is not yet supported.
1996-05-06 00:36:05 +00:00
c41bdbf690
Added a new routine kbdcmd() to send commands to the keyboard.
...
Added a new routine kbdreset() to conduct a full keyboard reset.
Added definitions of all keyboard command codes and responces.
Replaced kbd_set_leds() with new function that used kbdcmd().
The keyboard attach function now detects whether a keyboard is
attached or not.
1996-05-06 00:35:05 +00:00
f5b3a4ddc7
Only call config_rootfound() for the podulebus is NPODULEBUS > 0.
1996-05-06 00:32:19 +00:00
938954d516
Mark interrupt handlers attached to the irq chain as active in
...
irq_claim().
Clear the active flag in the irq handler when it is removed from the irq
chain in irq_release().
Checks for podule IRQ's in irq_claim() are now guarded with
#if NPODULEBUS > 0
fiq_release() now retrieves the FIQ more registers and places them
back in the fiq handler structure.
1996-05-06 00:30:39 +00:00
181c7ad5cd
Added a new function fiq_getregs() to transfer the FIQ mode register
...
into a fiqhandler structure.
Updated fiq_setregs to use symbols in assym.h for offsets into
fiqhandler structures.
1996-05-06 00:25:43 +00:00
60b2501141
Updated FIQ handler registers to match changes to the floppy
...
fiq routines.
1996-05-06 00:23:57 +00:00
08003631cc
Rewritten floppy_read_fiq() and floppy_write_fiq() routines.
...
Register usage changed to free fiq mode r13.
Added loop to keep reading bytes while the floppy FIQ is asserted.
1996-05-06 00:21:05 +00:00
4f7f1b7f73
Create definitions for fiqhandler structure members.
1996-05-06 00:16:25 +00:00
58ff5333d7
Fixed -Wall compiler warnings.
1996-05-06 00:11:16 +00:00
8f285e6977
Added prototype for sfasintr().
1996-05-06 00:09:28 +00:00
81e79a0787
Recognise the 24i16 digitiser podule.
...
Fixed -Wall compiler warnings.
1996-05-06 00:04:06 +00:00
1e69d1d283
Make this compile. Fixes PR#2047
1996-05-05 22:25:00 +00:00
cd2b07ab7c
We have our own prototype now for fillw()
1996-05-05 22:20:51 +00:00
079631f59d
Remove unneeded casts to fillw() since now it takes a void * argument.
1996-05-05 19:48:15 +00:00
db7563a62d
Fix gcc -Wall warnings
1996-05-05 19:46:15 +00:00
f8f10e569e
Make this compile again.
...
- use the abs function from libkern
- fix prototypes
1996-05-05 19:31:25 +00:00
59fdcbc7ad
Change the prototype of fillw from (int, caddr_t, size_t) to
...
(short, void *, size_t).
1996-05-05 19:29:26 +00:00
573f5e0cd6
Add the joystick
1996-05-05 19:28:34 +00:00
edd6e362c8
Pass struct fpframe * to m68881_restore().
1996-05-05 17:19:04 +00:00
81db0f78d0
Remove extra prototype.
1996-05-05 16:50:34 +00:00
f4bb6d51b2
Proto for lkmenodev().
1996-05-05 16:39:24 +00:00
513a0d293b
m68881_restore takes struct fpframe *, not int [].
1996-05-05 16:33:46 +00:00
2c9ba25cc1
Fix typo in last.
1996-05-05 16:21:20 +00:00
ba1ef888e9
removed the define for cdev_ss_init
1996-05-05 16:17:27 +00:00
e637bae39d
Added an include for the sunos_sendsig prototyp
1996-05-05 16:11:31 +00:00
30023f7acd
MicroSpeed mouse support from Taras Ivanenko <ivanenko@ctpa03.mit.edu>.
...
Also some updates to actually used #defined constants instead of numeric
constants.
1996-05-05 14:33:55 +00:00
70f5d6ae04
Initial revision
1996-05-05 12:17:14 +00:00
320e7320ef
NetBSD/x68k, by Masaru Oki.
1996-05-05 12:17:03 +00:00
1febcb957e
Prototype for sunos_sendsig() is now in sunos.h as suggested by veego.
1996-05-05 12:02:41 +00:00
eb2ad19d6d
Include pcb.h for prototypes.
1996-05-05 11:45:41 +00:00
c02d890ef9
Move a few prototypes into machine/cpu.h.
1996-05-05 06:54:09 +00:00
62c8d3c70c
Fix obvious bug introduced in last change.
1996-05-05 06:50:02 +00:00
aad6e71194
Prototype for sunos_sendsig().
1996-05-05 06:43:33 +00:00
37163421a3
Prototype for -Wall -Wstrict-prototypes -Wmissing-prototypes -Wno-uninitialized
...
Also change the device probing scheme to use something a bit more rational.
A current side-effect is that nubus cards are double-mapped. I expect
to fix that shortly.
Also change splclock() to block everything but serial hardware interrupts.
1996-05-05 06:15:56 +00:00
4f0e481bc3
Kernel crash dumps now work on the sun3. (Yea!)
1996-05-05 06:02:23 +00:00
99d2ff44d8
proto now says void dk_establish()
1996-05-05 06:00:31 +00:00
3d0b5f42cc
Used by the new libkvm
1996-05-05 04:19:31 +00:00
thorpej