Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5892c210fd
NetBSD/sys/arch/i386/conf/files.i386

496 lines
12 KiB
Plaintext
Raw Normal View History

Merge db_trace for x86. From: Vladimir Kirillov proger at wilab dot org dot ua
2011-04-11 00:36:48 +04:00
# $NetBSD: files.i386,v 1.357 2011/04/10 20:36:48 christos Exp $
after 0.2.2 "stable" patches applied
1993-03-21 21:04:42 +03:00
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# new style config file for i386 architecture
Relocate aha1742.c, in preparation for other changes.
1994-11-03 18:55:40 +03:00
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
Pull up the bouyer-xenamd64 branch to HEAD. This brings in amd64 support to NetBSD/Xen, both Dom0 and DomU.
2007-11-22 19:16:40 +03:00
ifndef xen
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# maxpartitions must be first item in files.${ARCH}.newconf
Backout previous -- this is not enough, config needs to be taught how to reach partitions above h. Noted by Simon Burge, related to PR 24905.
2004-03-25 18:26:35 +03:00
maxpartitions 8
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
boost maximum MAXUSERS to 128
2001-09-09 22:36:36 +04:00
maxusers 2 16 128
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
some assym cleanup. - move copyin and friends from locore.S to their own file, copy.S. share it between i386 and xen. - defparam KERNBASE and kill KERNBASE_LOCORE hack. - add more symbols to assym.h and use it where appropriate.
2005-11-07 14:42:34 +03:00
defparam opt_kernbase.h KERNBASE
Add a CPURESET_DELAY options which specifies the delay (in milliseconds) between the "rebooting" message and the hardware reset. If set to 0, the call to delay() is disabled. Default is 2s.
1998-10-13 15:43:50 +04:00
# delay before cpu_reset() for reboot.
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam CPURESET_DELAY
Add a CPURESET_DELAY options which specifies the delay (in milliseconds) between the "rebooting" message and the hardware reset. If set to 0, the call to delay() is disabled. Default is 2s.
1998-10-13 15:43:50 +04:00
Microsoft Xbox support, from Andrew Gillham. Still requires some bug fixes in the nfe(4) driver; works with USB ethernet. Requires Xromwell / Cromwell 2.41dev or above to boot. Tested both CD boot and etherboot. xboxfb(4) currently does not work properly with component video cables.
2007-01-04 21:16:43 +03:00
# Xbox support
defflag XBOX
Generate dependencies on the VM86 option.
1998-01-16 01:25:52 +03:00
# VM86 emulation
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag VM86
add definitions for the in-kernel vm86 code and vesabios attachment, add an option APM_USE_KVM86 which does what its name implies
2002-07-07 17:03:47 +04:00
defflag KVM86
Generate dependencies on the VM86 option.
1998-01-16 01:25:52 +03:00
Generate dependencies on the USER_LDT option.
1998-01-22 03:39:16 +03:00
# User-settable LDT (used by WINE)
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag USER_LDT
Generate dependencies on the USER_LDT option.
1998-01-22 03:39:16 +03:00
Generate dependenices on the XSERVER option.
1998-01-22 04:16:23 +03:00
# X server support in console drivers
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_xserver.h XSERVER XSERVER_DDB
Generate dependenices on the XSERVER option.
1998-01-22 04:16:23 +03:00
fix REALBASEMEM/REALEXTMEM and defopt them while we're at it. from jason.
2001-02-11 22:03:47 +03:00
# The REAL{BASE,EXT}MEM options
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_realmem.h REALBASEMEM REALEXTMEM
fix REALBASEMEM/REALEXTMEM and defopt them while we're at it. from jason.
2001-02-11 22:03:47 +03:00
Add PHYSMEM_MAX_ADDR and PHYSMEM_MAX_SIZE options. This limit physical memory based on overall size (useful for debugging to keep core dumps small) or maximum address (when using devices with bus dma limits). Contrary to REALBASEMEM and REALEXTMEM, they still use the BIOS memory map and can therefore deal with fragmented memory.
2007-12-26 19:28:15 +03:00
# The PHYSMEM_MAX_{SIZE,ADDR} optionms
defparam opt_physmem.h PHYSMEM_MAX_ADDR PHYSMEM_MAX_SIZE
make the code which decodes the MAKEBOOTDEV()-style boot device (as passed by the pre-1.3 bootloader) optional
1999-10-25 21:26:05 +04:00
# understand boot device passed by pre-1.3 bootblocks
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag COMPAT_OLDBOOT
make the code which decodes the MAKEBOOTDEV()-style boot device (as passed by the pre-1.3 bootloader) optional
1999-10-25 21:26:05 +04:00
Add glue for BIOS32 and PCI BIOS.
1999-11-17 04:22:29 +03:00
# PCI BIOS options
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_pcibios.h PCIBIOS PCIBIOSVERBOSE
defparam (not defflag) PCIBIOS_IRQS_HINT. pointed out by Kevin Lahey
2001-12-03 03:10:14 +03:00
PCIBIOS_INTR_GUESS PCIINTR_DEBUG
defparam opt_pcibios.h PCIBIOS_IRQS_HINT
Add glue for BIOS32 and PCI BIOS.
1999-11-17 04:22:29 +03:00
add KSTACK_CHECK_DR0.
2002-07-03 06:46:11 +04:00
# kernel stack debug
defflag opt_kstack_dr0.h KSTACK_CHECK_DR0
Add a kernel configuration flag, SPLDEBUG, that activates a per-CPU log of transitions to IPL_HIGH from lower IPLs. SPLDEBUG is only available on i386 and Xen kernels, today. 'options SPLDEBUG' adds instrumentation to spllower() and splraise() as well as routines to start/stop debugging and to record IPL transitions: spldebug_start(), spldebug_stop(), spldebug_raise(), spldebug_lower().
2009-11-03 08:23:27 +03:00
# splraise()/spllower() debug
defflag opt_spldebug.h SPLDEBUG
Implement the beep on halt feature. When enabled, it makes the kernel beep the computer speaker when it's completely safe to power down the machine (after the "The operating system has halted." message). This is useful for headless machines. The feature is only enabled if the BEEP_ONHALT option is defined (disabled by default). It can be tuned through the BEEP_ONHALT_{COUNT,PERIOD,PITCH} options. Closes my own PR kern/18792.
2003-03-25 22:37:12 +03:00
# Beep on halt
- Share pchb(4) between i386 and amd64; one copy is enough for both. - Move some of the x86 PCI devices into x86/pci/files.pci. - Add more x86 stuff into x86/conf/files.x86. ok joerg.
2007-10-27 01:49:50 +04:00
defflag opt_beep.h BEEP_ONHALT
defparam opt_beep.h BEEP_ONHALT_COUNT=3
defparam opt_beep.h BEEP_ONHALT_PITCH=1500
defparam opt_beep.h BEEP_ONHALT_PERIOD=250
Implement the beep on halt feature. When enabled, it makes the kernel beep the computer speaker when it's completely safe to power down the machine (after the "The operating system has halted." message). This is useful for headless machines. The feature is only enabled if the BEEP_ONHALT option is defined (disabled by default). It can be tuned through the BEEP_ONHALT_{COUNT,PERIOD,PITCH} options. Closes my own PR kern/18792.
2003-03-25 22:37:12 +03:00
Implement support for 'The Multiboot Specification' so that i386 kernels can be booted directly from Multiboot-compliant boot loaders (e.g. GRUB). See the added multiboot(8) manual page for more information. No objections in tech-kern@; only positive comments.
2006-02-03 14:08:23 +03:00
# Multiboot support
- Share pchb(4) between i386 and amd64; one copy is enough for both. - Move some of the x86 PCI devices into x86/pci/files.pci. - Add more x86 stuff into x86/conf/files.x86. ok joerg.
2007-10-27 01:49:50 +04:00
defflag opt_multiboot.h MULTIBOOT
obsolete defparam MULTIBOOT_SYMTAB_SPACE
file arch/i386/i386/multiboot.c multiboot
Implement support for 'The Multiboot Specification' so that i386 kernels can be booted directly from Multiboot-compliant boot loaders (e.g. GRUB). See the added multiboot(8) manual page for more information. No objections in tech-kern@; only positive comments.
2006-02-03 14:08:23 +03:00
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
file arch/i386/i386/autoconf.c
Put the COMPAT_NOMID stuff into its own file.
2008-11-20 13:53:08 +03:00
file arch/i386/i386/aout_machdep.c exec_aout
x86 changes for pcc and LKMs. - Replace most inline assembly with proper functions. As a side effect this reduces the size of amd64 GENERIC by about 120kB, and i386 by a smaller amount. Nearly all of the inlines did something slow, or something that does not need to be fast. - Make curcpu() and curlwp functions proper, unless __GNUC__ && _KERNEL. In that case make them inlines. Makes curlwp LKM and preemption safe. - Make bus_space and bus_dma more LKM friendly. - Share a few more files between the ports. - Other minor changes.
2007-09-26 23:48:34 +04:00
file arch/i386/i386/busfunc.S
file arch/i386/i386/cpufunc.S
Refactor in_cksum/in4_cksum/in6_cksum implementations: - All three functions are included in the kernel by default. They call a backend function cpu_in_cksum after possibly computing the checksum of the pseudo header. - cpu_in_cksum is the core to implement the one-complement sum. The default implementation is moderate fast on most platforms and provides a 32bit accumulator with 16bit addends for L32 platforms and a 64bit accumulator with 32bit addends for L64 platforms. It handles edge cases like very large mbuf chains (could happen with native IPv6 in the future) and provides a good base for new native implementations. - Modify i386 and amd64 assembly to use the new interface. This disables the MD implementations on !x86 until the conversion is done. For Alpha, the portable version is faster.
2008-01-26 00:12:10 +03:00
file arch/i386/i386/cpu_in_cksum.S (inet | inet6) & cpu_in_cksum
New interrupt code. The basic idea behind it is to hide the differences in interrupt controllers in struct pic, and try to keep as much common code as possible. At the lowest (asm) level, this is done with CPP macros. The main structure is now struct intrsource, describing an established interrupt line, of any kind (soft/hard local apic/legacy apic/IO apic). For quick masking, there may be a maximum of 32 sources per CPU. Sources can be assigned to any CPU in the MP case, though currently they all go to the boot CPU.
2002-11-22 18:23:35 +03:00
file arch/i386/i386/db_dbgreg.S ddb | kstack_check_dr0
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
file arch/i386/i386/db_disasm.c ddb
file arch/i386/i386/db_interface.c ddb
Merge db_trace for x86. From: Vladimir Kirillov proger at wilab dot org dot ua
2011-04-11 00:36:48 +04:00
file arch/i386/i386/db_machdep.c ddb
Add new DDB and KGDB files.
1997-07-06 08:09:45 +04:00
file arch/i386/i386/db_memrw.c ddb | kgdb
- Split crashdump code out into its own file. - Remove NO_SPARSE_DUMP. - Minor KNF, sprinkle static.
2008-01-12 23:03:41 +03:00
file arch/i386/i386/dumpsys.c
Switch to using MI code to find disklabel on MBR disks.
2003-07-07 17:34:08 +04:00
file kern/subr_disk_mbr.c disk
Add a kernel configuration flag, SPLDEBUG, that activates a per-CPU log of transitions to IPL_HIGH from lower IPLs. SPLDEBUG is only available on i386 and Xen kernels, today. 'options SPLDEBUG' adds instrumentation to spllower() and splraise() as well as routines to start/stop debugging and to record IPL transitions: spldebug_start(), spldebug_stop(), spldebug_raise(), spldebug_lower().
2009-11-03 08:23:27 +03:00
file kern/subr_spldebug.c spldebug
Various changes from John Kohl and me: Map kernel stacks only at unique addresses. Use one TSS per process. Add sysarch calls for modifying IOPL and the I/O permission bitmap. Add a compacting GDT entry allocator, for TSS and LDT selectors. Enable modifying %fs and %gs with PT_SETREGS. Sanitize various bits of code.
1995-10-11 07:19:29 +03:00
file arch/i386/i386/gdt.c
x86 changes for pcc and LKMs. - Replace most inline assembly with proper functions. As a side effect this reduces the size of amd64 GENERIC by about 120kB, and i386 by a smaller amount. Nearly all of the inlines did something slow, or something that does not need to be fast. - Make curcpu() and curlwp functions proper, unless __GNUC__ && _KERNEL. In that case make them inlines. Makes curlwp LKM and preemption safe. - Make bus_space and bus_dma more LKM friendly. - Share a few more files between the ports. - Other minor changes.
2007-09-26 23:48:34 +04:00
file arch/i386/i386/i386func.S
Make IPKDB working again. Add support for i386 debugging and pci-based ne2000 boards.
2000-03-22 23:58:25 +03:00
file arch/i386/i386/ipkdb_glue.c ipkdb
Add new DDB and KGDB files.
1997-07-06 08:09:45 +04:00
file arch/i386/i386/kgdb_machdep.c kgdb
Add MODULAR option. Include kernel linker stuff if MODULAR.
2008-01-06 21:03:58 +03:00
file arch/i386/i386/kobj_machdep.c modular
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
file arch/i386/i386/machdep.c
Split off the Transmeta Crusoe Longrun code into its own file, that way identcpu.c and machdep.c are not cluttered with foreign code. The driver is built by default as before, but the sysctl subtree will only be created if longrun is detected and not always as the old code did. This matches what the FreeBSD code does. Ok by christos@.
2008-02-26 21:24:28 +03:00
file arch/i386/i386/longrun.c
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
file arch/i386/i386/mem.c
Add code to frob the MTRR-like registers on the AMD K6-2 and AMD K6-III.
2001-09-19 05:26:18 +04:00
file arch/i386/i386/mtrr_k6.c mtrr
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
file arch/i386/i386/process_machdep.c
file arch/i386/i386/trap.c
file dev/cons.c
One last bit of whitespace from PR kern/22595.
2010-01-03 07:06:31 +03:00
file arch/i386/i386/mptramp.S multiprocessor
Merge Bill Sommerfeld's i386 MP branch. This code has some known caveats, but works quite well in a lot of MP cases, and all UP cases that I have tested. Parts of this will hopefully be reworked in the not-too-distant future.
2002-10-01 16:56:36 +04:00
Add support for using the 586- and 686-class performance counters.
2000-09-13 08:47:00 +04:00
file arch/i386/i386/pmc.c perfctrs
* Move config defns for the crypto algorithms into their own files. Define an attribute for each crypto algorithm, and use that attribute to select the files that implement the algorithm. * Give the "wlan" attribute a dependency on the "arc4" attribute. * Give the "cgd" pseudo-device the "des", "blowfish", "cast128", and "rijndael" attributes. * Use the new attribute-as-option-dependencies feature of config(8) to give the IPSEC_ESP option dependencies on the "des", "blowfish", "cast128", and "rijndael" attributes.
2002-10-11 05:52:04 +04:00
file crypto/des/arch/i386/des_enc.S des
file crypto/des/arch/i386/des_cbc.S des
file crypto/blowfish/arch/i386/bf_enc.S blowfish
We can't use bf_cbc.S if I386_CPU is defined; the 80386 doesn't have bswapl, and bf_cbc.S uses it. Unfortunately, this means that GENERIC will no longer use the asm code -- though it will still use the asm for the basic Blowfish transform. This won't slow down the KAME IPsec (since it rolls its own CBC) but may slow down fast-ipsec in kernels that have I386_CPU defined.
2003-11-16 15:02:15 +03:00
file crypto/blowfish/arch/i386/bf_cbc.S blowfish & !i386_cpu
Add asm versions of blowfish and des transforms for i386. This also involved updating the in-kernel DES functions to correspond to the versions in our in-tree OpenSSL, because the des_SPtrans table has changed; the asm code will not work with the old permutation table! C and i386 asm code for the DES, 3DES, and Blowfish CBC modes is also included; it is not currently built as the ESP processing in esp_core.c splits the CBC operation and the cipher transform apart. Hopefully that will be fixed as there is a substantial performance improvement to be had from doing so. It will remain necessary to use the C version of the Blowfish CBC function on some i386 machines, however, as the asm version uses bswapl, which ony 486 and later processors have. The DES CBC code doesn't have this problem. Finally, change esp_core.c to use the ecb3_encrypt function instead of calling ecb_encrypt three times; this improves performance a bit, in particular in the asm case.
2001-09-09 15:00:59 +04:00
Relocate aha1742.c, in preparation for other changes.
1994-11-03 18:55:40 +03:00
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# Machine-independent SCSI drivers
Relocate aha1742.c, in preparation for other changes.
1994-11-03 18:55:40 +03:00
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/scsipi/files.scsipi"
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
Shuffle wd/wdc driver files around (via repository copies). wdc now lives in dev/ic, wd now lives in dev/ata. there's now a 'ata' interface attribute defined in conf/files, but wdc can't go there yet because some ports still use private versions based on the old ISA version.
1998-01-15 02:36:30 +03:00
#
# Machine-independent ATA drivers
#
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/ata/files.ata"
Shuffle wd/wdc driver files around (via repository copies). wdc now lives in dev/ic, wd now lives in dev/ata. there's now a 'ata' interface attribute defined in conf/files, but wdc can't go there yet because some ports still use private versions based on the old ISA version.
1998-01-15 02:36:30 +03:00
rename: ramdisk => md
1996-12-29 02:10:44 +03:00
# Memory Disk for install floppy
pointless to compile md_root.c without md.c
2008-06-13 21:26:33 +04:00
file dev/md_root.c memory_disk_hooks & md
Make ca(4) useable as a block/boot device.
2000-03-16 17:53:29 +03:00
Pull in dev/i2o/files.i2o.
2000-11-08 22:48:51 +03:00
#
# Machine-independent I2O drivers
#
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/i2o/files.i2o"
Pull in dev/i2o/files.i2o.
2000-11-08 22:48:51 +03:00
Add glue for BIOS32 and PCI BIOS.
1999-11-17 04:22:29 +03:00
# attribute used to bring in BIOS trampoline code for real-mode probing
# of certain devices/BIOS features
whitespace police
2001-02-24 04:34:28 +03:00
define bioscall
New interrupt code. The basic idea behind it is to hide the differences in interrupt controllers in struct pic, and try to keep as much common code as possible. At the lowest (asm) level, this is done with CPP macros. The main structure is now struct intrsource, describing an established interrupt line, of any kind (soft/hard local apic/legacy apic/IO apic). For quick masking, there may be a maximum of 32 sources per CPU. Sources can be assigned to any CPU in the MP case, though currently they all go to the boot CPU.
2002-11-22 18:23:35 +03:00
file arch/i386/i386/bioscall.S bioscall needs-flag
Add glue for BIOS32 and PCI BIOS.
1999-11-17 04:22:29 +03:00
# BIOS32 routines
define bios32
file arch/i386/i386/bios32.c bios32 needs-flag
Phase out the use of a string as first "attach args" member to control which bustype should be attached with a specific call to config_found() (from a "mainbus" or a bus bridge). Do it for isa/eisa/mca and pci/agp for now. These buses all attach to an mi interface attribute "isabus", "eisabus" etc., and the autoconf framework now allows to specify an interface attribute on config_found() and config_search(), which limits the search of matching config data to these which attach to that specific attribute. So we basically have to call config_found_ia(..., "foobus", ...) where such a bus is attached. As a consequence, where a "mainbus" or alike also attaches other devices (eg CPUs) which do not attach to a specific attribute yet, we need at least pass an attribute name (different from "foobus") so that the foo bus is not found at these places. This made some minor changes necessary which are not obviously related to the mentioned buses.
2004-08-30 19:05:15 +04:00
# i386 specific mainbus attributes
- Share pchb(4) between i386 and amd64; one copy is enough for both. - Move some of the x86 PCI devices into x86/pci/files.pci. - Add more x86 stuff into x86/conf/files.x86. ok joerg.
2007-10-27 01:49:50 +04:00
define apmbus {}
define pnpbiosbus {}
Phase out the use of a string as first "attach args" member to control which bustype should be attached with a specific call to config_found() (from a "mainbus" or a bus bridge). Do it for isa/eisa/mca and pci/agp for now. These buses all attach to an mi interface attribute "isabus", "eisabus" etc., and the autoconf framework now allows to specify an interface attribute on config_found() and config_search(), which limits the search of matching config data to these which attach to that specific attribute. So we basically have to call config_found_ia(..., "foobus", ...) where such a bus is attached. As a consequence, where a "mainbus" or alike also attaches other devices (eg CPUs) which do not attach to a specific attribute yet, we need at least pass an attribute name (different from "foobus") so that the foo bus is not found at these places. This made some minor changes necessary which are not obviously related to the mentioned buses.
2004-08-30 19:05:15 +04:00
Relocate aha1742.c, in preparation for other changes.
1994-11-03 18:55:40 +03:00
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# System bus types
#
Add glue for BIOS32 and PCI BIOS.
1999-11-17 04:22:29 +03:00
# XXX BIOS32 only if something that uses it is configured!
Phase out the use of a string as first "attach args" member to control which bustype should be attached with a specific call to config_found() (from a "mainbus" or a bus bridge). Do it for isa/eisa/mca and pci/agp for now. These buses all attach to an mi interface attribute "isabus", "eisabus" etc., and the autoconf framework now allows to specify an interface attribute on config_found() and config_search(), which limits the search of matching config data to these which attach to that specific attribute. So we basically have to call config_found_ia(..., "foobus", ...) where such a bus is attached. As a consequence, where a "mainbus" or alike also attaches other devices (eg CPUs) which do not attach to a specific attribute yet, we need at least pass an attribute name (different from "foobus") so that the foo bus is not found at these places. This made some minor changes necessary which are not obviously related to the mentioned buses.
2004-08-30 19:05:15 +04:00
device mainbus: isabus, eisabus, mcabus, pcibus, bios32, acpibus,
Remove vesafb, it has been replaced by genfb on x86.
2009-02-19 03:54:08 +03:00
cpubus, ioapicbus, apmbus, pnpbiosbus, ipmibus,
Merge jmcneill-pm branch.
2007-12-09 23:27:42 +03:00
bioscall
New device attachment scheme: - split softc size and match/attach out from cfdriver into a new struct cfattach. - new "attach" directive for files.*. May specify the name of the cfattach structure, so that devices may be easily attached to parents with different autoconfiguration semantics.
1996-03-17 04:26:49 +03:00
attach mainbus at root
Attach isa, eisa, and pci to mainbus now, rather than root. The i386 now has a single device tree (rather than a forest). Also, attach EISA only if it's present, and attach in order: PCI, EISA, ISA (most specific to least specific).
1996-03-04 06:25:48 +03:00
file arch/i386/i386/mainbus.c mainbus
update for adjustments to ISA and PCI 'files' files
1996-02-28 04:58:25 +03:00
#
# PCI-only drivers
# XXX MUST BE INCLUDED BEFORE files.isa, as long as files.isa attaches
# XXX devices to 'pci'.
#
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/pci/files.pci"
Move the AGP device declaration stuff into files.agp.
2001-09-15 05:10:09 +04:00
include "dev/pci/files.agp"
Add glue for BIOS32 and PCI BIOS.
1999-11-17 04:22:29 +03:00
file arch/i386/pci/pcibios.c pcibios
Rework the configuration scheme for PCI fixups: * bus enumeration fixups are not PCIBIOS-specific, interrupt fixups are done by both PCIBIOS and ACPI. The redundancy is very redundant. Therefore, rename PCIBIOS_*_FIXUP to PCI_*_FIXUP, use PCI_INTR_FIXUP in place of ACPI_PCI_FIXUP, and change code refences to match. * move the fixup defines from opt_pcibios.h to opt_pcifixup.h to reflect the above. * fix up the PCI bus numbering in mainbus_attach(), right after we detect the configuration mode. This probably renders the fixup in pcibios.c redundant -- but it should be harmless. These changes make cardbus work in ACPI-only machines, when PCI_BUS_FIXUP and PCI_INTR_FIXUP are defined.
2005-06-21 12:19:25 +04:00
file arch/i386/pci/pci_intr_fixup.c pcibios & pci_intr_fixup
file arch/i386/pci/piix.c pcibios & pci_intr_fixup
file arch/i386/pci/opti82c558.c pcibios & pci_intr_fixup
file arch/i386/pci/opti82c700.c pcibios & pci_intr_fixup
file arch/i386/pci/sis85c503.c pcibios & pci_intr_fixup
file arch/i386/pci/via82c586.c pcibios & pci_intr_fixup
PCI Interrupt router support for VIA VT823[1357] Southbridges. From OpenBSD.
2006-01-01 15:12:43 +03:00
file arch/i386/pci/via8231.c pcibios & pci_intr_fixup
Rework the configuration scheme for PCI fixups: * bus enumeration fixups are not PCIBIOS-specific, interrupt fixups are done by both PCIBIOS and ACPI. The redundancy is very redundant. Therefore, rename PCIBIOS_*_FIXUP to PCI_*_FIXUP, use PCI_INTR_FIXUP in place of ACPI_PCI_FIXUP, and change code refences to match. * move the fixup defines from opt_pcibios.h to opt_pcifixup.h to reflect the above. * fix up the PCI bus numbering in mainbus_attach(), right after we detect the configuration mode. This probably renders the fixup in pcibios.c redundant -- but it should be harmless. These changes make cardbus work in ACPI-only machines, when PCI_BUS_FIXUP and PCI_INTR_FIXUP are defined.
2005-06-21 12:19:25 +04:00
file arch/i386/pci/amd756.c pcibios & pci_intr_fixup
file arch/i386/pci/ali1543.c pcibios & pci_intr_fixup
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam PCI_CONF_MODE
Fix up support for PCI attachments of pcic devices on i386 in general, and the Cirrus Logic CL-PD6729 in particular. From danw@mit.edu in PR port-i386/6436.
1998-12-20 20:53:28 +03:00
file arch/i386/pci/pcic_pci_machdep.c pcic_pci
update for adjustments to ISA and PCI 'files' files
1996-02-28 04:58:25 +03:00
- Share pchb(4) between i386 and amd64; one copy is enough for both. - Move some of the x86 PCI devices into x86/pci/files.pci. - Add more x86 stuff into x86/conf/files.x86. ok joerg.
2007-10-27 01:49:50 +04:00
# x86 specific PCI hardware
include "arch/x86/pci/files.pci"
Update for pchb and pcib drivers.
1996-11-28 06:15:13 +03:00
Add a driver for the AMD Elan SC520 System Controller. The "elansc" driver attaches where "pchb" would normally attach (it matches at a higher match priority). The "elansc" driver currently provides support for the watchdog timer built-in the SC520. Thanks to Jasper Wallace for laying the ground-work for this (most notably by providing a work-around for a watchdog-related bug in the SC520).
2002-08-12 05:03:12 +04:00
# AMD Elan SC520 System Controller (PCI-Host bridge)
Attach two new devices to the AMD Elan SC520 System Controller, elansc(4). elanpex(4) is for PCI exception reporting. I've already found some kernel bugs by reading the exceptions reported. Beware that it will spam the console a lot while the kernel and pcictl(8) probe non-existing addresses in PCI configuration space. elanpar(4) protects the kernel text from writes by the CPU and by PCI bus masters. As you might guess, this is not compatible with setting breakpoints using a debugger; detach the device using 'drvctl -d elanpar0' before you try to set breakpoints. In the future, I hope to extend elanpar(4) to provide general-purpose RAM write-protection.
2008-01-21 11:04:51 +03:00
define elanparbus { }
define elanpexbus { }
Commit straggler: elansc now attaches to something that provides the 'pcibus' interface instead of the 'pci' interface.
2008-04-10 10:53:12 +04:00
device elansc: sysmon_wdog, gpiobus, elanparbus, elanpexbus, pcibus
attach elansc at pcibus
Add a driver for the AMD Elan SC520 System Controller. The "elansc" driver attaches where "pchb" would normally attach (it matches at a higher match priority). The "elansc" driver currently provides support for the watchdog timer built-in the SC520. Thanks to Jasper Wallace for laying the ground-work for this (most notably by providing a work-around for a watchdog-related bug in the SC520).
2002-08-12 05:03:12 +04:00
file arch/i386/pci/elan520.c elansc
Attach two new devices to the AMD Elan SC520 System Controller, elansc(4). elanpex(4) is for PCI exception reporting. I've already found some kernel bugs by reading the exceptions reported. Beware that it will spam the console a lot while the kernel and pcictl(8) probe non-existing addresses in PCI configuration space. elanpar(4) protects the kernel text from writes by the CPU and by PCI bus masters. As you might guess, this is not compatible with setting breakpoints using a debugger; detach the device using 'drvctl -d elanpar0' before you try to set breakpoints. In the future, I hope to extend elanpar(4) to provide general-purpose RAM write-protection.
2008-01-21 11:04:51 +03:00
device elanpar
attach elanpar at elanparbus
device elanpex
attach elanpex at elanpexbus
Import i386/gcscide(4). A driver for the IDE Controller of the AMD CS5535 Companion device found in the decTOP. gcscide0 at pci0 dev 15 function 2 gcscide0: National Semiconductor/AMD CS5535 IDE Controller (rev. 0x00) Supports Ultra DMA mode 4, Pio Mode 4 and MDMA mode 2. "Go for it" jmcneill@.
2007-06-28 03:02:52 +04:00
# AMD Geode CS5535 Companion IDE controller
device gcscide: ata, ata_dma, ata_udma, pciide_common, wdc_common
attach gcscide at pci
file arch/i386/pci/gcscide.c gcscide
Add gcscehci(4), an EHCI glue driver for the AMD CS5536 companion controller. This driver enables USB 2.0 high speed support on the Soekris net5501 (comBIOS ver. 1.31m).
2007-07-08 05:13:26 +04:00
# AMD Geode CS5536 Companion EHCI
device gcscehci: usbus
attach gcscehci at pci
file arch/i386/pci/gcscehci.c gcscehci
convert to timecounters (from branch simonb-timecounters)
2006-06-08 02:37:14 +04:00
# AMD Geode SC1100 GCB area
device geodegcb {}
attach geodegcb at pci
file arch/i386/pci/geode.c geodegcb
Add a driver for the watchdog timer on the AMD Geode SC1100.
2005-09-22 11:09:35 +04:00
# AMD Geode SC1100 Watchdog Timer
convert to timecounters (from branch simonb-timecounters)
2006-06-08 02:37:14 +04:00
device geodewdog: sysmon_wdog, geodegcb
attach geodewdog at geodegcb
file arch/i386/pci/geodewdg.c geodewdog
# AMD Geode SC1100 high resolution counter
device geodecntr: geodegcb
attach geodecntr at geodegcb
file arch/i386/pci/geodecntr.c geodecntr
Add a driver for the watchdog timer on the AMD Geode SC1100.
2005-09-22 11:09:35 +04:00
Add pceb at pci and {eisa,isa} at pceb attachments.
1998-02-06 10:53:26 +03:00
# PCI-EISA bridges
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device pceb: eisabus, isabus
Add pceb at pci and {eisa,isa} at pceb attachments.
1998-02-06 10:53:26 +03:00
attach pceb at pci
file arch/i386/pci/pceb.c pceb
Update for pchb and pcib drivers.
1996-11-28 06:15:13 +03:00
# PCI-ISA bridges
Add NS Geode PCI-ISA bridge GPIO support.
2005-09-27 06:42:44 +04:00
device gscpcib: isabus, gpiobus
attach gscpcib at pci
file arch/i386/pci/gscpcib.c gscpcib
Add gcscpcib(4): a driver for the AMD CS5535 and CS5536 Companion Device that acts as PCI-ISA bridge and supports a Timecounter, Watchdog Timer and GPIO. Adapted by Yojiro UO and minor tweaks by me from OpenBSD. Tested on CS5535 and CS5536. This closes PR kern/37577.
2008-01-09 17:23:46 +03:00
# AMD Geode CS5535/CS5536 PCI-ISA bridge
device gcscpcib: isabus, sysmon_wdog, gpiobus
attach gcscpcib at pci
file arch/i386/pci/gcscpcib.c gcscpcib
Add SpeedStep SMI support for Intel PIIX4 based Pentium III processors.
2006-05-06 19:46:48 +04:00
device piixpcib: isabus, bioscall
attach piixpcib at pci
file arch/i386/pci/piixpcib.c piixpcib
Add support for the VIA SMBus controller found on the VT8235 PCI-ISA bridge.
2006-03-17 15:19:49 +03:00
device viapcib: isabus, i2cbus
attach viapcib at pci
file arch/i386/pci/viapcib.c viapcib
Add an autoconfig node for PCI-MCA bridges. Configures MCA bridges via callback. This beast is very rare, present only on some IBM PCs. Code was copied off pceb.
2001-03-25 13:54:10 +04:00
# PCI-MCA bridges
device pcmb: mcabus
attach pcmb at pci
file arch/i386/pci/pcmb.c pcmb
Merge Bill Sommerfeld's i386 MP branch. This code has some known caveats, but works quite well in a lot of MP cases, and all UP cases that I have tested. Parts of this will hopefully be reworked in the not-too-distant future.
2002-10-01 16:56:36 +04:00
device p64h2apic
attach p64h2apic at pci
file arch/i386/pci/p64h2apic.c p64h2apic
Relocate aha1742.c, in preparation for other changes.
1994-11-03 18:55:40 +03:00
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# ISA and mixed ISA+EISA or ISA+PCI drivers
Relocate aha1742.c, in preparation for other changes.
1994-11-03 18:55:40 +03:00
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/isa/files.isa"
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# PC clock
switch to a common clock.c
2006-09-04 06:16:03 +04:00
file arch/x86/isa/clock.c isa
Split mc146818-related functions from clock.c into rtc.c. Call rtc_set_ymdhms() from xen/xen/clock.c:xen_rtc_set() for xen3 dom0 kernels as the Xen3 hypervisor doesn't write the new date/time to the CMOS by itself. Now a XEN3_DOM0 kernel properly updates the CMOS time.
2009-06-17 01:05:33 +04:00
file arch/x86/isa/rtc.c isa
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
convert to timecounters (from branch simonb-timecounters)
2006-06-08 02:37:14 +04:00
# TSC support
- Remove I486_CPU, I586_CPU, I686_CPU options. They buy us nothing and clutter the code significantly. - Remove pccons.
2007-11-14 20:54:56 +03:00
file arch/x86/x86/tsc.c
convert to timecounters (from branch simonb-timecounters)
2006-06-08 02:37:14 +04:00
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# Numeric Processing Extension; Math Co-processor
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device npx
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
file arch/i386/isa/npx.c npx needs-flag
Rearrange the npx driver a little to allow for multiple attachments and add a pnpbios atttachment for it.
2000-06-16 07:47:24 +04:00
attach npx at isa with npx_isa
file arch/i386/isa/npx_isa.c npx_isa
Remove last traces of obsolete olms and omms drivers. Ok'd by drochner and fvdl.
2003-05-15 17:13:21 +04:00
# PC Mice: Logitech-style and Microsoft-style
busmice have wsmouse attribute now add backwards compatible mice update for pms->opms renaming
1999-01-23 18:09:55 +03:00
device lms: wsmousedev
New device attachment scheme: - split softc size and match/attach out from cfdriver into a new struct cfattach. - new "attach" directive for files.*. May specify the name of the cfattach structure, so that devices may be easily attached to parents with different autoconfiguration semantics.
1996-03-17 04:26:49 +03:00
attach lms at isa
busmice have wsmouse attribute now add backwards compatible mice update for pms->opms renaming
1999-01-23 18:09:55 +03:00
file arch/i386/isa/lms.c lms
device mms: wsmousedev
New device attachment scheme: - split softc size and match/attach out from cfdriver into a new struct cfattach. - new "attach" directive for files.*. May specify the name of the cfattach structure, so that devices may be easily attached to parents with different autoconfiguration semantics.
1996-03-17 04:26:49 +03:00
attach mms at isa
busmice have wsmouse attribute now add backwards compatible mice update for pms->opms renaming
1999-01-23 18:09:55 +03:00
file arch/i386/isa/mms.c mms
allow use of new wscons code: -rename the "pckbd" internal attribute to pckbcport, it conflicts with the real pckbd device in dev/pckbc -add attachments of pccons and pms to the new mi keyboard controller driver (more or less for testing) -include the new "files.wscons" and "files.pckbc" -add declarations for VGA - must be done here for now to avoid conflicts with alpha's private VGA driver
1998-03-22 19:14:39 +03:00
Abstract the interface between pckbc(4), and the pckbd(4) and pms(4) drivers that attach to it. This allows for other host interface chips that use the same keyboards and mice, such as the ones in the ARM IOMD20, ARM7500, and SA-1111. The PC-compatible driver is still called pckbc(4), and the new abstraction layer is "pckbport", so the child devices have moved from sys/dev/pckbc to sys/dev/pckbport, which also contains some code shared between all host controllers. To avoid incompatibility, pckbdreg.h is still installed in /usr/include/dev/pckbc. In theory, this shouldn't cause any behavioural changes in the drivers concerned. Thy just use rather more function pointers than before. Tested on i386 and (with a new host driver) acorn32. Compiled on several other affected architectures.
2004-03-13 20:31:33 +03:00
include "dev/pckbport/files.pckbport"
allow use of new wscons code: -rename the "pckbd" internal attribute to pckbcport, it conflicts with the real pckbd device in dev/pckbc -add attachments of pccons and pms to the new mi keyboard controller driver (more or less for testing) -include the new "files.wscons" and "files.pckbc" -add declarations for VGA - must be done here for now to avoid conflicts with alpha's private VGA driver
1998-03-22 19:14:39 +03:00
whitespace police
2001-02-24 04:34:28 +03:00
device sysbeep
attach sysbeep at pcppi
add a device node for "sysbeep at pcppi"
1998-04-17 00:16:28 +04:00
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# Floppy disk controller
Carve off the ISA configuration bits from the floppy driver. Driver is still ISA-specific, but we can attach ISA instances with different configuration mechanisms now.
2000-04-23 20:47:45 +04:00
device fdc {drive = -1}: isadma
Use dev/isa/fd.c.
2000-04-07 20:35:19 +04:00
file dev/isa/fd.c fdc needs-flag
Carve off the ISA configuration bits from the floppy driver. Driver is still ISA-specific, but we can attach ISA instances with different configuration mechanisms now.
2000-04-23 20:47:45 +04:00
attach fdc at isa with fdc_isa
file dev/isa/fdc_isa.c fdc_isa
device fd: disk
attach fd at fdc
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
adding AHA-284x VL front-end to ahc driver by Jason Thorpe.
1996-08-06 01:15:58 +04:00
# Adaptec AHA-284x VL SCSI controllers
# device declaration in sys/conf/files
Add new files for common ahc EISA/VL code.
2000-03-15 05:10:41 +03:00
attach ahc at isa with ahc_isa: ahc_aic77xx, smc93cx6
adding AHA-284x VL front-end to ahc driver by Jason Thorpe.
1996-08-06 01:15:58 +04:00
file arch/i386/isa/ahc_isa.c ahc_isa
Relocate aha1742.c, in preparation for other changes.
1994-11-03 18:55:40 +03:00
#
# EISA-only drivers
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/eisa/files.eisa"
there's now a eisa_machdep.c which must be included when including EISA support.
1996-04-10 02:59:03 +04:00
file arch/i386/eisa/eisa_machdep.c eisa
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
Switch to MI ns_cksum.c - the MD ns_cksum.c is equivalent to it (modulo some u_intX_t vs. u_char type usage). In particular, the MD version didn't contain any MD code.
2000-04-06 17:37:49 +04:00
#
# MCA-only drivers
#
whitespace police
2001-02-24 04:34:28 +03:00
device mca {[slot = -1]} : bioscall
include "dev/mca/files.mca"
Add i386-specific part of MicroChannel Architecture bus support, as found in some older IBM PS/2 machines. This code is based upon work by Scott D. Telford, with some minor bits in arch/i386/mca/mca_machdep.c taken from FreeBSD. XXX this is still very experimental and development version; use at your XXX own risk
2000-05-11 20:38:10 +04:00
file arch/i386/mca/mca_machdep.c mca
Switch to MI ns_cksum.c - the MD ns_cksum.c is equivalent to it (modulo some u_intX_t vs. u_char type usage). In particular, the MD version didn't contain any MD code.
2000-04-06 17:37:49 +04:00
- add the Plug and Play glue - make the joystick driver use it.
1997-01-17 02:19:56 +03:00
# ISA Plug 'n Play devices
file arch/i386/isa/isapnp_machdep.c isapnp
-pull in mi date conversion functions -include files.vme (not worth much normally, but makes it easy to plug in something)
1999-02-07 20:25:31 +03:00
#
# VME support
#
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/vme/files.vme"
-pull in mi date conversion functions -include files.vme (not worth much normally, but makes it easy to plug in something)
1999-02-07 20:25:31 +03:00
Pull-in GPIB.
2003-06-02 08:02:20 +04:00
#
# GPIB support
#
include "dev/gpib/files.gpib"
Add cmos(4) for reading/writing CMOS RAM on x86 boxes. This driver comes from Takahiro Kambe, with some mods by me.
2007-02-06 10:28:59 +03:00
#
# CMOS RAM
#
defpseudo cmos
file arch/i386/isa/cmos.c cmos needs-flag
add Advanced Power Management driver Includes bootstrap support from FreeBSD (Tatsumi HOSOKAWA and <ukai>)
1996-08-26 03:38:57 +04:00
#
# Other mainbus-attached devices
#
Adjust to the new apm backend.
2006-07-09 00:28:06 +04:00
include "dev/apm/files.apm"
add Advanced Power Management driver Includes bootstrap support from FreeBSD (Tatsumi HOSOKAWA and <ukai>)
1996-08-26 03:38:57 +04:00
# Advanced Power Management support (APM)
Adjust to the new apm backend.
2006-07-09 00:28:06 +04:00
attach apm at apmbus with apmbios: bioscall
file arch/i386/i386/apmbios.c apmbios needs-flag
file arch/i386/i386/apmcall.S apmbios
add Advanced Power Management driver Includes bootstrap support from FreeBSD (Tatsumi HOSOKAWA and <ukai>)
1996-08-26 03:38:57 +04:00
Use the pic16lc@iic driver for setting the system LED, rebooting, and powering off the machine instead of the assembly code in pic16l.S
2007-01-06 21:42:36 +03:00
# XBox LED & system support
file arch/i386/xbox/xbox.c xbox
# XBox X3LCD support (*very* rudimentary)
Microsoft Xbox support, from Andrew Gillham. Still requires some bug fixes in the nfe(4) driver; works with USB ethernet. Requires Xromwell / Cromwell 2.41dev or above to boot. Tested both CD boot and etherboot. xboxfb(4) currently does not work properly with component video cables.
2007-01-04 21:16:43 +03:00
file arch/i386/xbox/xboxlcd.c xbox
# XBox framebuffer support
- Share pchb(4) between i386 and amd64; one copy is enough for both. - Move some of the x86 PCI devices into x86/pci/files.pci. - Add more x86 stuff into x86/conf/files.x86. ok joerg.
2007-10-27 01:49:50 +04:00
device xboxfb: wsemuldisplaydev, rasops32, vcons
attach xboxfb at pci
Microsoft Xbox support, from Andrew Gillham. Still requires some bug fixes in the nfe(4) driver; works with USB ethernet. Requires Xromwell / Cromwell 2.41dev or above to boot. Tested both CD boot and etherboot. xboxfb(4) currently does not work properly with component video cables.
2007-01-04 21:16:43 +03:00
file arch/i386/xbox/xboxfb.c xboxfb needs-flag
Relocate aha1742.c, in preparation for other changes.
1994-11-03 18:55:40 +03:00
#
# Compatibility modules
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
VM86 support, by John Kohl, touched up a bit by me.
1996-01-08 16:51:30 +03:00
# VM86 mode
file arch/i386/i386/vm86.c vm86
add definitions for the in-kernel vm86 code and vesabios attachment, add an option APM_USE_KVM86 which does what its name implies
2002-07-07 17:03:47 +04:00
# VM86 in kernel
file arch/i386/i386/kvm86.c kvm86
New interrupt code. The basic idea behind it is to hide the differences in interrupt controllers in struct pic, and try to keep as much common code as possible. At the lowest (asm) level, this is done with CPP macros. The main structure is now struct intrsource, describing an established interrupt line, of any kind (soft/hard local apic/legacy apic/IO apic). For quick masking, there may be a maximum of 32 sources per CPU. Sources can be assigned to any CPU in the MP case, though currently they all go to the boot CPU.
2002-11-22 18:23:35 +03:00
file arch/i386/i386/kvm86call.S kvm86
add definitions for the in-kernel vm86 code and vesabios attachment, add an option APM_USE_KVM86 which does what its name implies
2002-07-07 17:03:47 +04:00
Fix thinko in previous.
1998-09-12 14:48:27 +04:00
# Binary compatibility with previous NetBSD releases (COMPAT_XX)
remove relicts of COMPAT_AOUT, fixes compilation problems with old kernel config files reported by Patrick Welche on current-users
2006-10-19 20:55:37 +04:00
file arch/i386/i386/compat_13_machdep.c compat_13
Add compat_16_machdep.c
2003-09-10 23:49:47 +04:00
file arch/i386/i386/compat_16_machdep.c compat_16 | compat_ibcs2
Fix thinko in previous.
1998-09-12 14:48:27 +04:00
Minor change.
1995-10-10 04:30:25 +03:00
# SVR4 binary compatibility (COMPAT_SVR4)
whitespace police
2001-02-24 04:34:28 +03:00
include "compat/svr4/files.svr4"
Minor change.
1995-10-10 04:30:25 +03:00
file arch/i386/i386/svr4_machdep.c compat_svr4
New interrupt code. The basic idea behind it is to hide the differences in interrupt controllers in struct pic, and try to keep as much common code as possible. At the lowest (asm) level, this is done with CPP macros. The main structure is now struct intrsource, describing an established interrupt line, of any kind (soft/hard local apic/legacy apic/IO apic). For quick masking, there may be a maximum of 32 sources per CPU. Sources can be assigned to any CPU in the MP case, though currently they all go to the boot CPU.
2002-11-22 18:23:35 +03:00
file arch/i386/i386/svr4_sigcode.S compat_svr4
Add a separate svr4_syscall().
2000-12-09 09:30:54 +03:00
file arch/i386/i386/svr4_syscall.c compat_svr4
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
add mach/macho files
2001-07-14 06:18:02 +04:00
# MACH binary compatibility (COMPAT_MACH)
include "compat/mach/files.mach"
darwin needs us.
2002-11-15 00:38:51 +03:00
file arch/i386/i386/mach_machdep.c compat_mach | compat_darwin
New interrupt code. The basic idea behind it is to hide the differences in interrupt controllers in struct pic, and try to keep as much common code as possible. At the lowest (asm) level, this is done with CPP macros. The main structure is now struct intrsource, describing an established interrupt line, of any kind (soft/hard local apic/legacy apic/IO apic). For quick masking, there may be a maximum of 32 sources per CPU. Sources can be assigned to any CPU in the MP case, though currently they all go to the boot CPU.
2002-11-22 18:23:35 +03:00
file arch/i386/i386/mach_sigcode.S compat_mach | compat_darwin
darwin needs us.
2002-11-15 00:38:51 +03:00
file arch/i386/i386/mach_syscall.c compat_mach | compat_darwin
add darwin_commpage_machdep.S [does nothing for now, and the name is too long]
2004-07-04 19:22:03 +04:00
file arch/i386/i386/darwin_commpage_machdep.S compat_darwin
add mach/macho files
2001-07-14 06:18:02 +04:00
file arch/i386/i386/macho_machdep.c exec_macho
add COMPAT_DARWIN
2002-11-13 22:20:24 +03:00
# DARWIN binary compatibility (COMPAT_DARWIN)
include "compat/darwin/files.darwin"
Added an empty shell for signal delivery. Now we just have to fill the machine dependant bits.
2002-11-26 01:25:12 +03:00
file arch/i386/i386/darwin_machdep.c compat_darwin
add COMPAT_DARWIN
2002-11-13 22:20:24 +03:00
Minor change.
1995-10-10 04:30:25 +03:00
# iBCS-2 binary compatibility (COMPAT_IBCS2)
whitespace police
2001-02-24 04:34:28 +03:00
include "compat/ibcs2/files.ibcs2"
Add an ibcs2_setregs().
1997-09-12 03:05:30 +04:00
file arch/i386/i386/ibcs2_machdep.c compat_ibcs2
New interrupt code. The basic idea behind it is to hide the differences in interrupt controllers in struct pic, and try to keep as much common code as possible. At the lowest (asm) level, this is done with CPP macros. The main structure is now struct intrsource, describing an established interrupt line, of any kind (soft/hard local apic/legacy apic/IO apic). For quick masking, there may be a maximum of 32 sources per CPU. Sources can be assigned to any CPU in the MP case, though currently they all go to the boot CPU.
2002-11-22 18:23:35 +03:00
file arch/i386/i386/ibcs2_sigcode.S compat_ibcs2
as discussed on tech-kern, put linux and ibcs2 syscall code to separate files and change syscall() to call p->p_emul->e_syscall() if it's not NULL
2000-12-02 19:03:23 +03:00
file arch/i386/i386/ibcs2_syscall.c compat_ibcs2
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
Minor change.
1995-10-10 04:30:25 +03:00
# Linux binary compatibility (COMPAT_LINUX)
whitespace police
2001-02-24 04:34:28 +03:00
include "compat/linux/files.linux"
include "compat/linux/arch/i386/files.linux_i386"
New interrupt code. The basic idea behind it is to hide the differences in interrupt controllers in struct pic, and try to keep as much common code as possible. At the lowest (asm) level, this is done with CPP macros. The main structure is now struct intrsource, describing an established interrupt line, of any kind (soft/hard local apic/legacy apic/IO apic). For quick masking, there may be a maximum of 32 sources per CPU. Sources can be assigned to any CPU in the MP case, though currently they all go to the boot CPU.
2002-11-22 18:23:35 +03:00
file arch/i386/i386/linux_sigcode.S compat_linux
as discussed on tech-kern, put linux and ibcs2 syscall code to separate files and change syscall() to call p->p_emul->e_syscall() if it's not NULL
2000-12-02 19:03:23 +03:00
file arch/i386/i386/linux_syscall.c compat_linux
Move linux_trap.c from sys/arch/i386/i386 to sys/arch/x86/x86, and share it. Remove the amd64 linux_trap.c (which was just a stub with a printf anyway).
2005-05-16 02:20:23 +04:00
file arch/x86/x86/linux_trap.c compat_linux
FreeBSD binary compatibility module, from Noriyuki Soda.
1995-10-10 04:22:31 +03:00
Minor change.
1995-10-10 04:30:25 +03:00
# FreeBSD binary compatibility (COMPAT_FREEBSD)
whitespace police
2001-02-24 04:34:28 +03:00
include "compat/freebsd/files.freebsd"
FreeBSD binary compatibility module, from Noriyuki Soda.
1995-10-10 04:22:31 +03:00
file arch/i386/i386/freebsd_machdep.c compat_freebsd
New interrupt code. The basic idea behind it is to hide the differences in interrupt controllers in struct pic, and try to keep as much common code as possible. At the lowest (asm) level, this is done with CPP macros. The main structure is now struct intrsource, describing an established interrupt line, of any kind (soft/hard local apic/legacy apic/IO apic). For quick masking, there may be a maximum of 32 sources per CPU. Sources can be assigned to any CPU in the MP case, though currently they all go to the boot CPU.
2002-11-22 18:23:35 +03:00
file arch/i386/i386/freebsd_sigcode.S compat_freebsd
separate the freebsd syscall code similarily to other emulations
2000-12-18 23:38:27 +03:00
file arch/i386/i386/freebsd_syscall.c compat_freebsd
Include OSS audio emulation.
1997-04-04 19:35:06 +04:00
Updated to the latest NDIS code. I added commented out lines in the files arch/i386/conf/GENERIC, arch/i386/conf/files.i386 and dev/pci/files.pci which can simply be uncommented to compile NDIS into the kernel. I'll write some documentation on this soon. Note that NDIS is still somewhat experimental. It is currently tested and functions relatively well on on two cards: 1. Dell (Broadcom) TrueMobile 1400 Dual Band WLAN Mini-PCI 2. Intel EtherExpress Pro/100
2006-03-31 04:03:57 +04:00
# NDIS compatibilty (COMPAT_NDIS)
A number of minor changes for NDIS. (OK'd by phil) 1. Removed the makeoptions line from arch/i386/conf/GENERIC. Now ndis_driver_data.h is simply copied into the kernel build directory instead of editing the config file to specify its location. 2. Uncommented lines in files.i386 and files.pci related to NDIS. NDIS will not be compiled into the kernel unless the two lines are uncommented from GENERIC (I checked using nm), so there is no reason for this to be commented out. 3. Added ndiscvt to usr.sbin/Makefile.
2006-04-18 20:49:19 +04:00
include "compat/ndis/files.ndis"
Updated to the latest NDIS code. I added commented out lines in the files arch/i386/conf/GENERIC, arch/i386/conf/files.i386 and dev/pci/files.pci which can simply be uncommented to compile NDIS into the kernel. I'll write some documentation on this soon. Note that NDIS is still somewhat experimental. It is currently tested and functions relatively well on on two cards: 1. Dell (Broadcom) TrueMobile 1400 Dual Band WLAN Mini-PCI 2. Intel EtherExpress Pro/100
2006-03-31 04:03:57 +04:00
Add stubs for PE/COFF.
2000-06-04 20:26:11 +04:00
# Win32 binary compatibility (COMPAT_PECOFF)
whitespace police
2001-02-24 04:34:28 +03:00
include "compat/pecoff/files.pecoff"
Add stubs for PE/COFF.
2000-06-04 20:26:11 +04:00
Include OSS audio emulation.
1997-04-04 19:35:06 +04:00
# OSS audio driver compatibility
whitespace police
2001-02-24 04:34:28 +03:00
include "compat/ossaudio/files.ossaudio"
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
This is the first check-in of CardBus driver. CardBus driver contains CardBus bus stub, YENTA PCI-CardBus bridge (cbb), 3Com 3C575TX driver (ex) and Intel fxp driver. TODO: o Conform to the KNF more strictly. o Be unified with pcmcia code as much as possible. o Add more drivers for CardBus card, such as APA-1480 or USB card. The affected files are listed below. sys/arch/i386/conf/files.i386 sys/arch/macppc/conf/files.macppc sys/conf/files sys/dev/ic/elinkxl.c sys/dev/ic/elinkxlvar.h sys/dev/ic/i82365.c sys/dev/ic/i82365var.h sys/dev/isa/i82365_isasubr.c sys/dev/pci/files.pci sys/dev/pcmcia/pcmcia.c sys/dev/pcmcia/pcmciachip.h The added files are listed below. sys/arch/i386/conf/CARDBUS sys/arch/i386/include/rbus_machdep.h sys/arch/i386/i386/rbus_machdep.c sys/arch/macppc/include/rbus_machdep.h sys/arch/macppc/macppc/rbus_machdep.c sys/dev/cardbus/if_ex_cardbus.c sys/dev/cardbus/Makefile.cardbusdevs sys/dev/cardbus/cardbus.c sys/dev/cardbus/cardbus_map.c sys/dev/cardbus/cardbusdevs sys/dev/cardbus/cardbusdevs.h sys/dev/cardbus/cardbusdevs_data.h sys/dev/cardbus/cardbusvar.h sys/dev/cardbus/cardslot.c sys/dev/cardbus/cardslotvar.h sys/dev/cardbus/devlist2h.awk sys/dev/cardbus/files.cardbus sys/dev/cardbus/if_fxp_cardbus.c sys/dev/cardbus/pccardcis.h sys/dev/cardbus/rbus.c sys/dev/cardbus/rbus.h sys/dev/pci/pccbb.c sys/dev/pci/pccbbreg.h sys/dev/pci/pccbbvar.h
1999-10-15 10:07:17 +04:00
#
# CARDBUS
#
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/cardbus/files.cardbus"
This is the first check-in of CardBus driver. CardBus driver contains CardBus bus stub, YENTA PCI-CardBus bridge (cbb), 3Com 3C575TX driver (ex) and Intel fxp driver. TODO: o Conform to the KNF more strictly. o Be unified with pcmcia code as much as possible. o Add more drivers for CardBus card, such as APA-1480 or USB card. The affected files are listed below. sys/arch/i386/conf/files.i386 sys/arch/macppc/conf/files.macppc sys/conf/files sys/dev/ic/elinkxl.c sys/dev/ic/elinkxlvar.h sys/dev/ic/i82365.c sys/dev/ic/i82365var.h sys/dev/isa/i82365_isasubr.c sys/dev/pci/files.pci sys/dev/pcmcia/pcmcia.c sys/dev/pcmcia/pcmciachip.h The added files are listed below. sys/arch/i386/conf/CARDBUS sys/arch/i386/include/rbus_machdep.h sys/arch/i386/i386/rbus_machdep.c sys/arch/macppc/include/rbus_machdep.h sys/arch/macppc/macppc/rbus_machdep.c sys/dev/cardbus/if_ex_cardbus.c sys/dev/cardbus/Makefile.cardbusdevs sys/dev/cardbus/cardbus.c sys/dev/cardbus/cardbus_map.c sys/dev/cardbus/cardbusdevs sys/dev/cardbus/cardbusdevs.h sys/dev/cardbus/cardbusdevs_data.h sys/dev/cardbus/cardbusvar.h sys/dev/cardbus/cardslot.c sys/dev/cardbus/cardslotvar.h sys/dev/cardbus/devlist2h.awk sys/dev/cardbus/files.cardbus sys/dev/cardbus/if_fxp_cardbus.c sys/dev/cardbus/pccardcis.h sys/dev/cardbus/rbus.c sys/dev/cardbus/rbus.h sys/dev/pci/pccbb.c sys/dev/pci/pccbbreg.h sys/dev/pci/pccbbvar.h
1999-10-15 10:07:17 +04:00
file arch/i386/i386/rbus_machdep.c cardbus
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
# XXXX pcic here because it needs to be late. The catch: pcic needs
# to be late, so devices which attach to it are attached late. But it
# needs to be before its isa and pci attachments. This answer is
# non-optimal, but I don't have a better answer right now.
Fix typos. No functional changes.
2000-08-21 11:39:42 +04:00
# PCIC pcmcia controller
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
# XXX this needs to be done very late, so it's done here. This feels
# like a kludge, but it might be for the best.
Defopt PCIC_ISA_ALLOC_IOBASE, PCIC_ISA_ALLOC_IOSIZE, and PCIC_ISA_INTR_ALLOC_MASK.
1997-10-30 01:50:46 +03:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam PCIC_ISA_ALLOC_IOBASE
defparam PCIC_ISA_ALLOC_IOSIZE
defparam PCIC_ISA_INTR_ALLOC_MASK
Defopt PCIC_ISA_ALLOC_IOBASE, PCIC_ISA_ALLOC_IOSIZE, and PCIC_ISA_INTR_ALLOC_MASK.
1997-10-30 01:50:46 +03:00
Export the `pcmciabus' attribute on the `pcic' controller.
1998-11-26 18:35:58 +03:00
device pcic: pcmciabus
Update for new location of i82365.c
1997-10-21 00:26:25 +04:00
file dev/ic/i82365.c pcic
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
Add ISA Plug and Play attachment for PCIC PCMCIA controller (pcic* at isapnp?). Slightly modify ISA attachment to let the two share code.
1998-06-07 22:34:38 +04:00
# PCIC pcmcia controller on ISA bus.
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
attach pcic at isa with pcic_isa
file dev/isa/i82365_isa.c pcic_isa
Add ISA Plug and Play attachment for PCIC PCMCIA controller (pcic* at isapnp?). Slightly modify ISA attachment to let the two share code.
1998-06-07 22:34:38 +04:00
# PCIC pcmcia controller on PCI bus.
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
attach pcic at pci with pcic_pci
file dev/pci/i82365_pci.c pcic_pci
Add ISA Plug and Play attachment for PCIC PCMCIA controller (pcic* at isapnp?). Slightly modify ISA attachment to let the two share code.
1998-06-07 22:34:38 +04:00
# PCIC pcmcia controller on PnP board
whitespace police
2001-02-24 04:34:28 +03:00
attach pcic at isapnp with pcic_isapnp
Add ISA Plug and Play attachment for PCIC PCMCIA controller (pcic* at isapnp?). Slightly modify ISA attachment to let the two share code.
1998-06-07 22:34:38 +04:00
file dev/isapnp/i82365_isapnp.c pcic_isapnp
# Code common to ISA and ISAPnP attachments
Fix up support for PCI attachments of pcic devices on i386 in general, and the Cirrus Logic CL-PD6729 in particular. From danw@mit.edu in PR port-i386/6436.
1998-12-20 20:53:28 +03:00
file dev/isa/i82365_isasubr.c pcic_isa | pcic_isapnp | pcic_pci
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
config(8) glue for the TCIC PCMCIA backend.
1999-03-23 23:07:39 +03:00
# XXXX tcic here because it needs to be late. The catch: tcic needs
# to be late, so devices which attach to it are attached late. But it
# needs to be before its isa and pci attachments. This answer is
# non-optimal, but I don't have a better answer right now.
Fix typos. No functional changes.
2000-08-21 11:39:42 +04:00
# TCIC pcmcia controller
config(8) glue for the TCIC PCMCIA backend.
1999-03-23 23:07:39 +03:00
# XXX this needs to be done very late, so it's done here. This feels
# like a kludge, but it might be for the best.
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam TCIC_ISA_ALLOC_IOBASE
defparam TCIC_ISA_ALLOC_IOSIZE
defparam TCIC_ISA_INTR_ALLOC_MASK
config(8) glue for the TCIC PCMCIA backend.
1999-03-23 23:07:39 +03:00
device tcic: pcmciabus
file dev/ic/tcic2.c tcic
Fix typos. No functional changes.
2000-08-21 11:39:42 +04:00
# TCIC pcmcia controller
config(8) glue for the TCIC PCMCIA backend.
1999-03-23 23:07:39 +03:00
attach tcic at isa with tcic_isa
file dev/isa/tcic2_isa.c tcic_isa
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
# this wants to be probed as late as possible.
#
# Machine-independent PCMCIA drivers
#
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/pcmcia/files.pcmcia"
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/usb/files.usb"
include "pnpbios" definitions
1999-11-12 21:40:07 +03:00
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@, NetBSD Foundation Membership still pending.) This stack was written by Iain under sponsorship from Itronix Inc. The stack includes support for rfcomm networking (networking via your bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets. Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 19:44:33 +04:00
include "dev/bluetooth/files.bluetooth"
Added SD/MMC support from OpenBSD. tested on i386, amd64 at current-users ML by pgoyette@. tested on zaurus by myself.
2009-04-21 07:00:29 +04:00
include "dev/sdmmc/files.sdmmc"
whitespace police
2001-02-24 04:34:28 +03:00
include "dev/ieee1394/files.ieee1394"
First Prototype implementation of network interface part for IEEE1394 (if_fw). Current status: Only OHCI chip is supported (fwohci). ping (IPv4) works with Sony's implementation (SmartConnect) on Win98. sometimes works but not stable. Not implemented yet: IRM (Isochronous Resource Manager) functionality. Link layer fragmentation. Topology map. More to do: clean ups MCAP charactor device part dhcp There is no entry in GENERIC config file yet. Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 20:17:12 +03:00
whitespace police
2001-02-24 04:34:28 +03:00
include "arch/i386/pnpbios/files.pnpbios"
Add ACPI config glue.
2001-09-28 06:06:55 +04:00
include "dev/acpi/files.acpi"
Merge jmcneill-pm branch.
2007-12-09 23:27:42 +03:00
file arch/i386/acpi/acpi_wakeup_low.S acpi
glue for MD acpi devices.
2002-06-18 02:38:31 +04:00
Add an npx at acpi(4) attachment
2002-12-28 20:51:16 +03:00
# Numeric Processing Extension; Math Co-processor
PR/34116: Takuya SHIOZAKI: acpiapm(4) misuses config(9) acpiapm(4) always matches the first node of AML, which is unrelated with acpiapm. Separate acpi(4)'s children into two individual interface attributes.
2006-08-06 19:46:54 +04:00
attach npx at acpinodebus with npx_acpi
Add an npx at acpi(4) attachment
2002-12-28 20:51:16 +03:00
file arch/i386/acpi/npx_acpi.c npx_acpi
Mark old vesabios/vesafb flags as obsolete, noted by cube
2009-02-19 16:06:49 +03:00
# Obsolete vesabios/vesafb flags
obsolete defflag opt_vesabios.h VESABIOSVERBOSE
obsolete defparam opt_vesafb.h VESAFB_WIDTH VESAFB_HEIGHT VESAFB_DEPTH
obsolete defflag opt_vesafb.h VESAFB_PM
Import driver for the AMD Geode LX AES Security Block, from OpenBSD. The glxsb(4) driver provides random numbers and AES acceleration.
2007-06-16 03:02:20 +04:00
# AMD Geode LX Security Block
device glxsb: opencrypto
attach glxsb at pci
file arch/i386/pci/glxsb.c glxsb
Merge the gehenna-devsw branch into the trunk. This merge changes the device switch tables from static array to dynamically generated by config(8). - All device switches is defined as a constant structure in device drivers. - The new grammer ``device-major'' is introduced to ``files''. device-major <prefix> char <num> [block <num>] [<rules>] - All device major numbers must be listed up in port dependent majors.<arch> by using this grammer. - Added the new naming convention. The name of the device switch must be <prefix>_[bc]devsw for auto-generation of device switch tables. - The backward compatibility of loading block/character device switch by LKM framework is broken. This is necessary to convert from block/character device major to device name in runtime and vice versa. - The restriction to assign device major by LKM is completely removed. We don't need to reserve LKM entries for dynamic loading of device switch. - In compile time, device major numbers list is packed into the kernel and the LKM framework will refer it to assign device major number dynamically.
2002-09-06 17:18:43 +04:00
include "arch/i386/conf/majors.i386"
Pull up the bouyer-xenamd64 branch to HEAD. This brings in amd64 support to NetBSD/Xen, both Dom0 and DomU.
2007-11-22 19:16:40 +03:00
endif #xen
Reference in New Issue Copy Permalink