These tests are implemented on test suite framework, which provides
helper client.
Following features are tested,
- notification of adding ivi-surface
- notification of ivi-surface configure
- notification of creating ivi-surface
- notification of removing ivi-surface
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
The TESTs in ivi_layout-test.c may have several server-side parts
(RUNNER_TEST in ivi_layout-test-plugin.c) each. Sometimes we need to
carry state from one RUNNER_TEST to another within one TEST, but not
across multiple TESTs. The correct lifetime of that state would be the
lifetime (and identity) of the runner_resource, as one TEST creates and
uses at most one weston_test_runner during its lifetime.
However, tests are executed one by one. Take a shortcut, and use a static
global for storing that state. This turns the test_context into a
singleton. To ensure it is not confused between multiple TESTs, add
asserts to verify its identity.
Following patches will add tests for notification callbacks. These will
be using the carried state.
[Pekka: add serialization checks, rename the global, rewrite commit message.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation,
Following features are tested,
- ivi-screen operation with bad parameter
- render order with bad parameter
- destroy ivi-layer in the ivi-screen and call commit_changes
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested,
- ivi-screen id
- ivi-screen resolution
- render order of ivi-layers in ivi-screen
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-layer,
- create with bad parameter
- visibility with bad parameter
- opacity with bad parameter
- destination rectangle with bad parameter
- orientation with bad parameter
- dimension with bad parameter
- position with bad parameter
- source rectangle with bad parameter
- properties with bad parameter
- destroy ivi-layer and call set_visibility_commit_changes
- destroy ivi-layer, call set_opacity, and commit_changes
- destroy ivi-layer, call set_orientation, and commit_changes
- destroy ivi-layer, call set_dimension, and commit_changes
- call set_position, destroy ivi-layer, and commit_changes
- call set_source_rectangle, destroy ivi-layer, and commit_changes
- call set_destination_rectangle, destroy ivi-layer, and commit_changes
- create duplicate
- destroy ivi-layer and call get_layer
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested,
- bad render order of ivi-surface on ivi-layer
- call commitchanges after a ivi_surface in render order is destoryed
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-layer,
- create
- visibility
- opacity
- orientation
- dimension
- position
- destination rectangle
- source rectangle
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These test are implemented on test suite framework, which provides
helper client.
Following features are tested,
- render order of ivi-surfaces on ivi-layer
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-surface,
- destination_rectangle with bad parameter
- orientation with bad parameter
- dimension with bad parameter
- position with bad parameter
- source_rectangle with bad parameter
- properties with bad parameter
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested,
- ivi_layout_runner with basic_test_names[]
- surface with bad opacity
- destroy ivi/wl_surface and call get_surface
- commit_changes_after_properties_set_surface_destroy with
surface_property_commit_changes_test_names[]
- call set_visibility, destroy ivi-surface, and commit_changes
- call set_opacity, destroy ivi-surface, and commit_changes
- call set_orientation, destroy ivi-surface, and commit_changes
- call set_dimension, destroy ivi-surface, and commit_changes
- call set_position, destroy ivi-surface, and commit_changes
- call set_source_rectangle, destroy ivi-surface, and commit_changes
- call set_destination_rectangle, destroy ivi-surface, and
commit_changes
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested for ivi-surface
- orientation
- dimension
- position
- destination rectangle
- source rectangle
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
Removed duplicate definitions of the container_of() macro and
refactored sources to use the single implementation.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
To help reduce code duplication and also 'kitchen-sink' includes
the ARRAY_LENGTH macro was moved to a stand-alone file and
referenced from the sources consuming it. Other macros will be
added in subsequent passes.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Using the parent '../' path component in #include statements makes
the codebase more rigid and is redundant due to proper -I use.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Use bit-shifts to properly generate pixel data.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We no longer have a race with shell startup because we create our own
colored surface and check that it's properly drawn.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
make check failed for out of tree builds because we didn't set up
WESTON_TEST_REFERENCE_PATH in weston-tests-env
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: Bryce Harrington <bryce@osg.samsung.com>
Provides a convenience function for JFDI grabbing of a single
screenshot. Tests that are doing multiple screenshots or other
fanciness probably will bypass this routine and do things more manually,
but this'll provide a reference implementation. And hopefully there'll
be enough simple cases that this actually is useful.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Minor refactoring to simplify initial sanity checks of surfaces.
Conceivably useful for other basic checking.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Loads an image from disk via cairo, and copies data into a weston test
surface for internal use.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
And use the helper routine for generating the output filename.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
This also serves as a proof of concept of the screen capture
functionality and as a demo for snapshot-based rendering verification.
Implements screenshot saving clientside in the test itself.
This also demonstrates use of test-specific configuration files, in this
case to disable fadein animations and background images.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Implements a simple mechanism to allow tests to customize the
configuration. For a given <name>-test.c just place a <name>.ini file
at the same location as the test itself. Alternately, you can generate
a <name>.ini in the same directory that the compiled test is placed
(i.e. the top builddir). If no configuration file is found, then no
configuration will be used (i.e. --no-config is specified.)
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Introduce helper routines for testing surfaces against specific
conditions. These allow tests to validate screen captures as displaying
the correct rendering results.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
This is the ivi_layout stand-alone test controller module that does not
require any clients to run. Therefore it is much simpler than
ivi_layout-test-plugin.c and does not need a matching part in
ivi_layout-test.c.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Testing the ivi_layout API requires two things:
- the tests must be written as a controller module to access the API
- the tests need a helper client to create some objects that can then be
managed via the API
This patch adds all the infrastructure and two different kinds of
example tests.
Internal ivi-shell (ivi_layout) API tests are listed as ivi-*.la files
in TESTS in Makefile.am. Weston-tests-env detects these, and runs Weston
with ivi-shell, and loads the given module as a controller module, not
as a normal plugin.
The test controller module ivi-*.la will launch a helper client. For
ivi-layout-test.la the helper client is ivi-layout.ivi.
The helper client uses the weston-test-runner framework to fork and exec
each TEST with a fresh connection to the compositor.
The actual test is triggered by the weston_test_runner protocol
interface, a new addition to weston-test.xml. The helper client uses
weston_test_runner to trigger a test, and the server side of the
interface is implemented by the test controller module
(ivi-layout-test.la).
The server side of weston_test_runner uses the same trick as
weston-test-runner.h to gather a list of defined tests. A test is
defined with the RUNNER_TEST macro.
If a test defined by RUNNER_TEST succeeds, an event is sent to the
helper client that it can continue (or exit). If a test fails, a fatal
protocol error is sent to the helper client.
Once the helper client has iterated over all of its tests, it signals
the batch success/failure via process exit code. That is cought in the
test controller module, and forwarded as Weston's exit code.
In summary: each ivi_layout test is a combination of a client side
helper/setup and server side actual tests.
v2: Load weston-test.so, because create_client() needs it.
v3: add a comment about IVI_TEST_SURFACE_ID_BASE.
v4: Rebased to upstream weston-tests-env changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com> (v2)
This simply tests that Weston starts with ivi-shell, and ivi_application
is present.
Changes in v3:
- Rebased to upstream weston-tests-env changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com> (v2)
Also use variable default assignment to eliminate an if clause
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The log files were being named like:
surface-global-test.la-log.txt
surface-global-test.la-serverlog.txt
surface-test.la-log.txt
surface-test.la-serverlog.txt
text.weston-log.txt
text.weston-serverlog.txt
For consistency, omit the test filename's extension (.la/.so).
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
basename returns the filename without path information (but with
the file extension). We can get this more efficiently via shell
variables.
Also, for the socket name, use the test's name without the file
extension.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
[Pekka: rebased without "tests: Support --config to enable tests to
override config defaults".]
A more descriptive name to not be confused with create_client().
v2: Rebased: fix also devices-test.c.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Introduce a new helper create_client(), which creates and initializes
the client struct, but does not create a wl_surface.
This will be useful for ivi-shell tests.
v2: Rebased, and restored the dependency to weston-test.so, since seat
handling requires it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Test misc races when adding/releasing devices
v2.: use one roundtrip after releasing devices
add touch support
v3.: remove useless checks
add few comments
repeat tests 30 times instead of 100 times
(it took too long, 30 is enough)
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Let the client bind to wl_touch. Since we have our own seat,
we know that the compositor will have wl_touch capability.
v2: rebased due to changes in previous commit
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When running on different backends, we don't know what devices
the backend provides. Create new seat for tests that contains
everything what we need. This is also first step in adding
touch support for tests.
v2: do not add devices in wl_seat.name event. Collect first
all wl_seats and then pick the one that we need and
destroy the rest. The effect is the same, but this code
is better understandable.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We used hard-coded version 1 for all globals. For testing
newer methods and events we need use the current version
of global. This patch fixes this and adds missing
event handlers (for the events that were added in
versions > 1)
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This request simulates device creation/destruction from evdev (libinput)
v2: added support for touch. Touch is not supported yet,
but better be prepared
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Make a little short-hand for the module directory.
This also cleans up the redefinition of BACKEND in the script.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jonny Lamb <jonny.lamb@collabora.co.uk>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
first is for getting and binding to globals and the other one is for
getting wl_shm.formats that are emitted after binding
to wl_shm
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a new Weston plugin under tests/ for manual testing of the
surface-shooting API.
The debug key binding 'h' triggers a surface shot from the surface that
currently has the pointer focus. The shot is written in PAM format into
a file. PAM format was chosen because it is dead-simple to write from
scratch and can carry an RGBA format.
Changes in v2:
- check fprintf calls, fix a malloc without free
- remove stride and format arguments from the API
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
wayland-test isn't and will never be wayland protocol, it's weston internal.
Renamed wayland-test to weston-test, and wl_test to weston_test.
Also added a Big Fat Warning to the description of weston_test to try to
keep people from thinking it's a good idea to use some of these functions
outside of testing.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
weston-test uses eglBindWaylandDisplayWL and friends, which are defined
either by the EGL implementation, or weston-egl-ext.h as a fallback.
Include weston-egl-ext.h from weston-test, so we can build on systems
whose native EGL implementation doesn't give us the needed defines.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
The old xwayland-test hasn't worked in a while...
This new test checks that the wayland specific WL_SURFACE_ID atom exists,
checks that the window manager name is "Weston WM" and then maps a window
and waits for an exposure event.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: Bryce Harrington <bryce@osg.samsung.com>
This skips the test when running on the headless backend.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
(Presumably) Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Decode the new feedback flags.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Since this is an inlined function, move it to a common header file.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Mostly remove headers that aren't actually needed for anything.
Add stdint.h to permit dropping xf86drm.h, which is otherwise unneeded.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Marek Chalupa <mchqwerty@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tests will now return the extra command line parameters they need
when run with --params
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add tests for triggering the role conflict when a wl_surface is already
a wl_shell_surface and then attempted to be made into a sub-surface, and
vice versa.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
desktop shell and weston keyboard both refer to themselves prefixed by
LIBEXECDIR, however this is only valid once installed. make check will
currently either fail or run pre-existing versions.
This patch adds a way to override that location by setting the env var
WESTON_BUILD_DIR - which is then set by the test env script so make check
will test the versions in the build directory regardless of whether they're
installed or not.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This introduces a new struct, weston_layer_entry, which is now used
in place of wl_list to keep the link for the layer list in weston_view
and the head of the list in weston_layer.
weston_layer_entry also has a weston_layer*, which points to the layer
the view is in or, in the case the entry it's the head of the list, to
the layer itself.
With expect_protocol_error, we need a possibility to wait for a frame
without aborting the test when wl_display_dispatch returns -1;
This patch adds function frame_callback_wait_nofail that only
returns 1 or 0 (instead of aborting on error).
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
This function checks if a particular protocol error came in wire.
It's usefull in the cases where we hitherto used FAIL_TEST.
The problem with FAIL_TEST is that *any* assert will pass the test,
but we want only some asserts to pass the test (i. e. we don't
want the test to pass when it, for example, can't connect to display).
FAIL_TESTs are good only for sanity testing.
The expect_protocol_error allows us to turn all FAIL_TESTs to TESTs
as will be introduced in following patches.
v2: fixed white-space error and a mistake in comment
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
Again, load the shell plugin with full path, rather than possibly find an
old version from a previous installation.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If we do not specify the full path to xwayland.so, Weston can find an
old one installed in a $prefix and use that instead of the freshly built
one.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Use --no-config to avoid loading arbitrary weston.ini files from unit
tests. It may affect the unit test results.
I actually hit the following case:
[13:34:04.636] Using config file '/home/pq/local/etc/weston.ini'
[13:34:04.636] Loading module '/home/pq/git/weston/.libs/headless-backend.so'
[13:34:04.637] launching '/home/pq/local/libexec/weston-keyboard'
[13:34:04.644] Loading module '/home/pq/local/lib/weston/desktop-shell.so'
[13:34:04.644] Loading module '/home/pq/local/lib/weston/xwayland.so'
[13:34:04.648] unlinking stale lock file /tmp/.X1-lock
[13:34:04.648] xserver listening on display :1
[13:34:04.648] Loading module '/home/pq/git/weston/.libs/./xwayland.so'
[13:34:04.648] xserver listening on display :2
[13:34:04.648] Module '/home/pq/local/lib/weston/xwayland.so' already loaded
Weston tries to load xwayland module three times, or which twice it
succeeds. This might not make the xwayland test end well. Or at all,
actually.
Adding --no-config should remove one of these loads of xwayland.so.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
bad-buffer-test is FAIL_TEST and every assert() (or even SIGSEGV signal)
make it pass. It shouldn't be so for example when assert() is invoked
when a client couldn't connect to display.
Make sure that only relevant asserts make the test pass
and the other make it fail (by returning 0)
There was an issue recently in screen-share.c where config.h was not
being included, resulting in the wrong definition for off_t being used on
32 bit systems. I checked and I don't think this problem is happening
elsewhere, but to help avoid this sort of problem in the future, I went
through and made sure that config.h is included first whenever system
headers are included.
The config.h header should be included before any system headers, failing
to do this can result in the wrong type sizes being defined on certain
systems, e.g. off_t from sys/types.h
Signed-off-by: Andrew Wedgbury <andrew.wedgbury@realvnc.com>
We were calling exit(0) when tests were skipped, which counted
them as passed instead of skipped. Fix this by properly exiting
with 77 (which is what automake expects for skipped tests) from
the tests themselves, then returning 77 again from weston-test-runner
if all the tests were skipped. Finally the weston-test.so module
catches weston-test-runner's exit code and uses it as an exit code,
which is what automake will see and use.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Other backends can be used by passing BACKEND=some-backend.so, e.g.
$ make check BACKEND=x11-backend.so
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
That is the case when using the headless backend. In the future
we may be able to use the mesa null egl platform but for now let's
just skip it.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
This makes automake place the object files in the same subdir as the
source file. For a recursive build system as we have now, there's
no difference, but with a non-recursive build system it means that
the object files don't all end up in the toplevel directory.
This patch fixes the compiler errors:
CC weston_test_la-weston-test.lo
weston-test.c:34:21: fatal error: EGL/egl.h: No such file or directory
CC buffer-count-test.o
buffer-count-test.c:30:21: fatal error: EGL/egl.h: No such file or directory
On rpi, the EGL headers are not in the standard path.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Comment #2 in the bug report says Mesa 10.0 branch does not have the
fix, and indeed buffer-count test fails on Mesa 10.0.1. Fix the test to
require Mesa 10.1 or later.
Now I correctly get:
mesa version too old (OpenGL ES 3.0 Mesa 10.0.1 (git-12484d2))
https://bugs.freedesktop.org/show_bug.cgi?id=72835
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
All the libexec programs are only built when BUILD_CLIENTS is true,
so we can just assign libexec_PROGRAMS under the condition. This lets us
drop most of the variable assignments and simplify it a bit.
https://bugs.freedesktop.org/show_bug.cgi?id=72812
This adds a test that tries to simulate a simple game loop that would
be like this:
while (1) {
draw_something();
eglSwapBuffers();
}
In this case the test is relying on eglSwapBuffers to throttle to a
sensible frame rate.
The test then verifies that only 2 EGL buffers are used. This is done
via a new request and event in the wayland-test protocol.
Currently this causes 3 buffers to be created because the release
event generated by the swap buffers is not processed by Mesa until it
blocks for the frame complete event in the next swap buffers call, but
that is too late.
This can be fixed in Mesa by issuing a sync request after the swap
buffers and blocking on it before deciding whether to allocate a new
buffer.
This has a couple of additional implications for the internal weston API:
1) weston_view_configure no longer exists. Use weston_view_set_position
instead.
2) The weston_surface.configure callback no longer takes a width and
height. If you need these, surface.width/height are set before
configure is called. If you need to know when the width/height
changes, you must track that yourself.
If libdrm is available, weston-launch and launcer-util.c will support
getting the drm device and setting and dropping drm master, otherwise
we'll only support getting input devices.
If the environment variable WESTON_TEST_CLIENT_PATH is not set, do not
quit Weston in the test plugin.
This allows one to start Weston with the test plugin manually, and then
run any tests also manually, while observing Weston's behaviour over
time. This is useful for:
- Running a test multiple times and checking if Weston leaks (e.g. with
Valgrind)
- Running tests manually on a backend that is not x11 or wayland,
especially the backends that require weston-launch, and therefore
cannot be used with the 'make check' machinery.
This change should not affect 'make check' behaviour, because there
WESTON_TEST_CLIENT_PATH is always set.
Cc: U. Artie Eoff <ullysses.a.eoff@intel.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This tests the wl_shm buffer access wrappers, that are supposed to catch
the invalid accesses to a memory-mapped file beyond EOF.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This reverts commit 2396aec684.
This exact version of the sub-surface protocol has been copied into
Wayland core. Therefore it must be removed from here to avoid build
conflicts and useless duplication.
No other changes to sub-surface protocol consumers are needed, the
identical API is now offered by libwayland-client and libwayland-server.
The commit adding sub-surfaces to Wayland is:
Author: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
protocol: add sub-surfaces to the core
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_view_update_transform() will post damage in the old and new
positions of the view and thus make sure we always repaint properly.
In particular, in bug 66133, the test suite moves the surface off
any output and weston_surface_schedule_repaint() in commit fails to
do anything, since the surface is not on any output.
After changing view geometry, we have to either call
weston_compositor_schedule_repaint(), which is what shell.c typically
does, though that repaints all outputs, or call
weston_view_update_transform() to force update the transformation
and queue repaints on affected outputs.
https://bugs.freedesktop.org/show_bug.cgi?id=66133
The weston_surface structure is split into two structures:
* The weston_surface structure storres everything required for a
client-side or server-side surface. This includes buffers; callbacks;
backend private data; input, damage, and opaque regions; and a few other
bookkeeping bits.
* The weston_view structure represents an entity in the scenegraph and
storres all of the geometry information. This includes clip region,
alpha, position, and the transformation list as well as all of the
temporary information derived from the geometry state. Because a view,
and not a surface, is a scenegraph element, the view is what is placed
in layers and planes.
There are a few things worth noting about the surface/view split:
1. This is *not* a modification to the protocol. It is, instead, a
modification to Weston's internal scenegraph to allow a single surface
to exist in multiple places at a time. Clients are completely unaware
of how many views to a particular surface exist.
2. A view is considered a direct child of a surface and is destroyed when
the surface is destroyed. Because of this, the view.surface pointer is
always valid and non-null.
3. The compositor's surface_list is replaced with a view_list. Due to
subsurfaces, building the view list is a little more complicated than
it used to be and involves building a tree of views on the fly whenever
subsurfaces are used. However, this means that backends can remain
completely subsurface-agnostic.
4. Surfaces and views both keep track of which outputs they are on.
5. The weston_surface structure now has width and height fields. These
are populated when a new buffer is attached before surface.configure
is called. This is because there are many surface-based operations
that really require the width and height and digging through the views
didn't work well.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
This tests (via the table-driven testing method) that the correct
number of vertices and also the correct vertices themselves
are generated for an clip box and polygon of up to eight vertices.
Also add a libshared-test.la so that we don't have to build weston-test-runner
all the time
The new TEST_P macro takes a function name and a "data" argument to
point to an arbitrary array of known size of test data. This allows
multiple tests to be run with different datasets. The array is stored
as a void * but advanced by a known size on each iteration.
The data for each invocation of the test is provided as a "data" argument,
it is the responsibility of the test to cast it to something sensible.
Also fixed single-test running to only run the tests specified
check_PROGRAMS and friends are only built during make check. Which is a
great way of introducing compiler errors in tests. Always build them, TESTS
defines what's being run during make check.
Now that we use AC_SYS_LARGEFILE, we need to pull in config.h at least
whereever we use mmap(). Fixes at least the test-suite and simple-shm
on 32 bit systems.
This commit sets the version numbers for all added/created objects. The
wl_compositor.create_surface implementation was altered to create a surface
with the same version as the underlying wl_compositor. Since no other
"child interfaces" have version greater than 1, they were all hard-coded to
version 1.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
It should not be possible to create a loop by nesting sub-surfaces.
Currently Weston fails this test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a test for varying the object destruction order in a complex
sub-surface tree.
This test attemps to fuzz the destruction of a sub-surface tree to make
sure the server does not crash on any wl_surface or wl_subsurface
destruction sequence.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
surface-global-test and surface-test did not get updated to
the new module_init(...) signature when it changed in
a50e6e4c50. Thus, they
failed to compile. Simply running 'make check' shows the
problem. This patch fixes it.
fixes https://bugs.freedesktop.org/show_bug.cgi?id=64691
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
This set of changes adds support for searching for a given config file
in the directories listed in $XDG_CONFIG_DIRS if it wasn't found in
$XDG_CONFIG_HOME or ~/.config. This allows packages to install custom
config files in /etc/xdg/weston, for example, thus allowing them to
avoid dealing with home directories.
To avoid a TOCTOU race the config file is actually open()ed during the
search. Its file descriptor is returned and stored in the compositor
for later use when performing subsequent config file parses.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
For testing the protocol behaviour only:
- linking a surface to a parent does not fail
- position and placement requests do not fail
- bad linking and arguments do fail
- passing a surface as a sibling from a different set fails
- different destruction sequences do not crash
- setting a surface as its own parent fails
- nesting succeeds
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add protocol for sub-surfaces, wl_subcompositor as the global interface,
and wl_subsurface as the per-surface interface extension.
This patch is meant to be reverted, once sub-surfaces are moved into
Wayland core.
Changes in v2:
- Rewrite wl_subcompositor.get_subsurface description, and move mapping
and commit details into wl_subsurface description. Check the wording
in wl_subsurface.set_position description.
- Add wl_subsurface.set_commit_mode request, and document it, with the
commit_mode enum. Add bad_value error code for wl_subsurface.
- Moved the protocol into Weston repository so we can land it upstream
sooner for public exposure. It is to be moved into Wayland core later.
- Add destroy requests to both wl_subcompositor and wl_subsurface, and
document them. Experience has showed, that interfaces should always
have a destructor unless there is a good and future-proof reason to not
have it.
Changes in v3:
- Specify, that wl_subsurface will become inert, if the corresponding
wl_surface is destroyed, instead of requiring a certain destruction
order.
- Replaced wl_subsurface.set_commit_mode with wl_subsurface.set_sync and
wl_subsurface.set_desync. Parent-cached commit mode is now called
synchronized, and independent mode is desynchronized. Removed
commit_mode enum, and bad_value error.
- Added support for nested sub-surfaces.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Instead of directly setting the dirty flag on weston_surface geometry,
use a function for that.
This allows us to hook into geometry dirtying in a following patch.
Also add comments to weston_surface fields, whose modification causes
transform state to become outdated.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
move_client() needs to attach the buffer, even if it was attached already,
because since 184df50 configure() will be called only on newly attached
surfaces, but the one that sets the test surface position is the configure
function.
This way the shell can know when a surface has been unmapped by
checking the value returned by weston_surface_is_mapped(surface).
The configure handlers have now width and height parameters, so
they do not need anymore to check manually the buffer size.
If a surface's buffer is NULL the width and height passed to the
configure are both 0.
Configure is now only called after an attach. The variable
weston_surface.pending.newly_attached is set to 1 on attach, and
after the configure call is reset to 0.
This patch installs the three header files that define the compositor
plugin interface as well as a pkg-config file. This allows
building weston plugins outside the weston tree. We currently don't make
any guarantees about the plugin API/ABI except that within a stable
branch we won't break it.
Tests especially, that attach-attach-commit does not result in a release
of the first buffer.
Also tests, that the old buffer is released when a new buffer has been
attached, committed, and displayed (frame callback).
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
To avoid duplicating the code for setting and waiting for a frame
callback, add helpers for it.
Convert move_client() to use the new helpers.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
By default enabled but one can disable it by passing --disable-xwayland-test
to the configure script. Also, the weston-tests-env script is trying to load
xwayland.so in either case, but it behaves resilient in the absence of that
meaning all the other tests are still going to be kicked for running.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
We handle FAIL_TEST tests by simply inverting the success flag. The
problem with this is, that if a FAIL_TEST fails by a SIGSEGV, it will be
interpreted as passed. However, no code should ever cause a SEGV, or any
other signal than ABRT. And even ABRT only in the case of an assert()
that is meant to fail. We would probably need more sophistication for the
FAIL_TEST cases.
For now, just interpret any other signal than ABRT as a hard failure,
regardless whether it is a TEST or FAIL_TEST. At least segfaults do not
cause false passes anymore.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Without this we try to load the installed backends, which is nasty for
regular runs, and just doesn't work for make distcheck, which sets
prefix to $PWD/_inst. This makes sure we load the right backend
and make distcheck pass. Other modules (xwayland, shells etc) just don't
get loaded for distcheck and for make check we still try to load the
installed modules.
Add a macro that wraps wl_display_roundtrip() and check for errors. It
is a macro, so that the assert would show the relevant file and line
number.
This will also catch protocol errors, that would go unnoticed otherwise.
All roundtrips in tests are replaced with the check.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This cleans up the 'make check' output considerably. When all goes well,
you will only see the "PASS" line for each of $TESTS.
Weston logs into a separate file than stdout and stderr, so server logs
end up in one file per test, and other output to another file per test.
'make distclean' does not remove the tests/logs/ directory.
Also changes the weston-tests-env interpreter to bash, since I think &>
and ${1/.la/.so} might be bashisms.
The remaining module tests don't need to fork and talk to a test client,
so just convert them to regular modules and let them handle running their
tests themselves. Then drop test-runner.[ch].
This test case is the last user of the test-client code and it only
tests launching the test-client. In other words it's a minimal test
of the framework we're dropping, so just drop this test.
Remaining use case was when we move the pointer. This doesn't change
geometry so we can just use a wl_display_roundtrip() to make sure
we get the request to the server and receive the resulting events.
As for button-test, a wl_display_roundtrip is sufficient here. The
yield() between wl_test_activate_surface() and wl_test_send_key() is
also not needed, since the two requests will arrive at the server in
order, and will activate the surface first, then send a key event.
A round trip is sufficient here. We need to make sure that the server
has received the wl_test request and that we've received the event
that the request triggers. The wl_display_roundtrip() helper does
exactly that: it sends a wl_display.sync request, which will hit the
server after the wl_test requests and thus the wl_callback.done event
will come back after the server has seen all the previous requests and
after we've handled all preceeding event.
When moving a test surface, use a frame callback to make sure the
surface has been moved and the geometry updated. The compositor may
delay updating the transform matrices, but once we get the frame
callback we know the surface has been repainted and the geometry
updated.
This adds a weston-test-runner for the weston test extension and
some weston test client helper methods.
Converted keyboard-test to use the new test interface, runner,
and helper methods.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=56822
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
The weston-tests-env script needs to be able to handle weston
test extension style tests as well as module style tests.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Renamed weston-test test environment script to weston-tests-env
to avoid ambiguity with weston-test.c (the weston test extension).
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
The weston test extension, called weston-test.so, can be loaded
from the "modules" configuration option on the command line
or in the .ini file.
Clients can bind to the "wl_test" interface to interact with
the weston test extension.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Since the send-button-state request comes in on one socket and the
wayland event we're looking for comes in on another socket, the order
that we process the two in is undefined. Thus, button-test fails
intermittently, depending on which event we process first.
We change wl_display_flush() to wl_display_roundtrip(), to make sure that
we deal with all wayland events before handling test protocol requests.
In seat_handle_capabilities, if input->pointer is not properly
initialized, then it will contain an arbitrary value and results
in the wl_pointer listener not getting registered if that value
is not 0/null. Thus, use calloc to initialize the "input" instance.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=49937
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Also make all the callers of weston_surface_assign_output() update the
transform instead. This makes sure that when the surface is assigned an
output its bouding box is valid.
This fixes a bug where a newly created surface would have a NULL output
assigned. This would cause weston_surface_schedule_repaint() to not
schedule a repaint, preventing the surface to be shown until something
else caused a repaint.
Add key event to the text_model interface and a key request to the
input_method_context interface. Implement it in the example editor
client and the example keyboard.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Add delete_surrounding_text event in the text_model interface and the
request in the input_method_context interface. Implement it in the
example editor client and in the example keyboard so that the backspace
key works with it.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Remove the wl_surface argument from create_text_model request. The
wl_surface is specified as an argument in the activate request instead.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
We can now load any number of general modules, and the shell and xwayland
are just two of them. We continue to use the mechanism for testing but
custom input drivers or logging mechanisms, for example are other use cases.
