Rather than reading SP from the env, pass it explicitly
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240214042726.19290-3-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Rather than reading P0 from the env, pass it explicitly
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240214042726.19290-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Currently, the register number (MuN) for modifier registers is the
modifier register number rather than the index into hex_gpr. This
patch changes MuN to the hex_gpr index, which is consistent with
the handling of control registers.
Note that HELPER(fcircadd) needs the CS register corresponding to the
modifier register specified in the instruction. We create a TCGv
variable "CS" to hold the value to pass to the helper.
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <20231210220712.491494-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Adding -Werror=shadow=compatible-local causes Hexagon not to build
when idef-parser is off. The "label" variable in CHECK_NOSHUF_PRED
shadows a variable in the surrounding code.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231130183955.54314-1-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
As docs/devel/loads-stores.rst states:
``GETPC()`` should be used with great care: calling
it in other functions that are *not* the top level
``HELPER(foo)`` will cause unexpected behavior. Instead, the
value of ``GETPC()`` should be read from the helper and passed
if needed to the functions that the helper calls.
Let's fix the GETPC() usage in Hexagon, making sure it's always called
from top level helpers and passed down to the places where it's
needed. There are a few snippets where that is not currently the case:
- probe_store(), which is only called from two helpers, so it's easy to
move GETPC() up.
- mem_load*() functions, which are also called directly from helpers,
but through the MEM_LOAD*() set of macros. Note that this are only
used when compiling with --disable-hexagon-idef-parser.
In this case, we also take this opportunity to simplify the code,
unifying the mem_load*() functions.
- HELPER(probe_hvx_stores), when called from another helper, ends up
using its own GETPC() expansion instead of the top level caller.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <2c74c3696946edba7cc5b2942cf296a5af532052.1689070412.git.quic_mathbern@quicinc.com>-ne
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20231008220945.983643-2-bcain@quicinc.com>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The following items in the CPUHexagonState are only used for bookkeeping
within the translation of a packet. With recent changes that eliminate
the need to free TCGv variables, these make more sense to be transient
and kept in DisasContext.
The following items are moved
dczero_addr
branch_taken
this_PC
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-22-tsimpson@quicinc.com>
The pkt_has_store_s1 field is only used for bookkeeping helpers with
a load. With recent changes that eliminate the need to free TCGv
variables, it makes more sense to make this transient.
These helpers already take the instruction slot as an argument. We
combine the slot and pkt_has_store_s1 into a single argument called
slotval.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-21-tsimpson@quicinc.com>
Precursor to moving new_value from the global state to DisasContext
USR will need to stay in the global state because some helpers will
set it's value
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-17-tsimpson@quicinc.com>
In certain cases, we can avoid the overhead of writing to hex_new_value
and write directly to hex_gpr. We add need_commit field to DisasContext
indicating if the end-of-packet commit is needed. If it is not needed,
get_result_gpr() and get_result_gpr_pair() can return hex_gpr.
We pass the ctx->need_commit to helpers when needed.
Finally, we can early-exit from gen_reg_writes during packet commit.
There are a few instructions whose semantics write to the result before
reading all the inputs. Therefore, the idef-parser generated code is
incompatible with short-circuit. We tell idef-parser to skip them.
For debugging purposes, we add a cpu property to turn off short-circuit.
When the short-circuit property is false, we skip the analysis and force
the end-of-packet commit.
Here's a simple example of the TCG generated for
0x004000b4: 0x7800c020 { R0 = #0x1 }
BEFORE:
---- 004000b4
movi_i32 new_r0,$0x1
mov_i32 r0,new_r0
AFTER:
---- 004000b4
movi_i32 r0,$0x1
This patch reintroduces a use of check_for_attrib, so we remove the
G_GNUC_UNUSED added earlier in this series.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20230427230012.3800327-12-tsimpson@quicinc.com>
These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
The following instructions are overriden
S2_cabacdecbin
SA1_cmpeqi
Remove the log_pred_write function from op_helper.c
Remove references in macros.h
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-8-tsimpson@quicinc.com>
With the overrides added in prior commits, this function is not used
Remove references in macros.h
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-7-tsimpson@quicinc.com>
These instructions have implicit reads from p0, so we don't want
them in helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-6-tsimpson@quicinc.com>
Convert away from the old interface with the implicit
MemOp argument. Importantly, this removes some incorrect
casts generated by idef-parser's gen_load().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230502135741.1158035-4-richard.henderson@linaro.org>
Most of these are not modelled in QEMU, so save the overhead of
calling a helper.
The only exception is dczeroa. It assigns to hex_dczero_addr, which
is handled during packet commit.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230410202402.2856852-1-tsimpson@quicinc.com>
The slot variable in helpers was only passed to log_reg_write function
where the argument is unused.
- Remove declaration from generated helper functions
- Remove slot argument from log_reg_write
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407204521.357244-1-tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230405164211.30015-3-tsimpson@quicinc.com>
Remove the following macros (remnants of the old generator design)
READ_REG
READ_PREG
WRITE_RREG
WRITE_PREG
Modify macros that rely on the above
The following are unused
READ_IREG
fGET_FIELD
fSET_FIELD
fREAD_P3
fREAD_NPC
fWRITE_LC0
fWRITE_LC1
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405183048.147767-1-tsimpson@quicinc.com>
We only need to track slot for predicated stores and predicated HVX
instructions.
Add arguments to the probe helper functions to indicate if the slot
is predicated.
Here is a simple example of the differences in the TCG code generated:
IN:
0x00400094: 0xf900c102 { if (P0) R2 = and(R0,R1) }
BEFORE
---- 00400094
mov_i32 slot_cancelled,$0x0
mov_i32 new_r2,r2
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 new_r2,tmp0
br $L2
set_label $L1
or_i32 slot_cancelled,slot_cancelled,$0x8
set_label $L2
mov_i32 r2,new_r2
AFTER
---- 00400094
mov_i32 new_r2,r2
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 new_r2,tmp0
br $L2
set_label $L1
set_label $L2
mov_i32 r2,new_r2
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-14-tsimpson@quicinc.com>
We assign the instruction destination register to hex_new_value[num]
instead of a TCG temp that gets copied back to hex_new_value[num].
We introduce new functions get_result_gpr[_pair] to facilitate getting
the proper destination register.
Since we preload hex_new_value for predicated instructions, we don't
need the check for slot_cancelled. So, we call gen_log_reg_write instead.
We update the helper function generation and gen_tcg.h to maintain the
disable-hexagon-idef-parser configuration.
Here is a simple example of the differences in the TCG code generated:
IN:
0x00400094: 0xf900c102 { if (P0) R2 = and(R0,R1) }
BEFORE
---- 00400094
mov_i32 slot_cancelled,$0x0
mov_i32 new_r2,r2
mov_i32 loc2,$0x0
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 loc2,tmp0
br $L2
set_label $L1
or_i32 slot_cancelled,slot_cancelled,$0x8
set_label $L2
and_i32 tmp0,slot_cancelled,$0x8
movcond_i32 new_r2,tmp0,$0x0,loc2,new_r2,eq
mov_i32 r2,new_r2
AFTER
---- 00400094
mov_i32 slot_cancelled,$0x0
mov_i32 new_r2,r2
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 new_r2,tmp0
br $L2
set_label $L1
or_i32 slot_cancelled,slot_cancelled,$0x8
set_label $L2
mov_i32 r2,new_r2
We'll remove the unnecessary manipulation of slot_cancelled in a
subsequent patch.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-13-tsimpson@quicinc.com>
Add overrides for
J2_callr
J2_callrt
J2_callrf
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-3-tsimpson@quicinc.com>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These helpers will be employed by the idef-parser generated code, to
correctly implement instruction semantics. "Helper" functions, in the
context of this patch, refers to functions which provide a manual TCG
implementation of certain features.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Niccolò Izzo <nizzo@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-6-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-4-anjo@rev.ng>
The imported files don't properly mark all CONDEXEC instructions, so
we add some logic to hex_common.py to add the attribute.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-7-tsimpson@quicinc.com>
Add pc field to Packet structure
For helpers that need PC, pass an extra argument
Remove slot arg from conditional jump helpers
On a trap0, copy pkt->pc into hex_gpr[HEX_REG_PC]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-6-tsimpson@quicinc.com>
When a packet has more than one change-of-flow instruction, only the first
one to branch is considered. We use the branch_taken variable to keep
track of this.
However, when there is a single cof instruction, we don't need the same
amount of bookkeeping.
We add the pkt_has_multi_cof member to the Packet structure, and pass this
information to the needed functions.
When there is a generated helper function with cof, the generator will
pass this pkt_has_multi_cof as a runtime value.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-5-tsimpson@quicinc.com>
This enables us to reduce the number of parameters to many functions
In particular, the generated functions previously took all 3 as arguments
Not only does this simplify the code, it improves the translation time
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-2-tsimpson@quicinc.com>
The store width is needed for packet commit, so it is stored in
ctx->store_width. Currently, it is set when a store has a TCG
override instead of a QEMU helper. In the QEMU helper case, the
ctx->store_width is not set, we invoke a helper during packet commit
that uses the runtime store width.
This patch ensures ctx->store_width is set for all store instructions,
so performance is improved because packet commit can generate the proper
TCG store rather than the generic helper.
We do this by
- Use the attributes from the instructions during translation to
set ctx->store_width
- Remove setting of ctx->store_width from genptr.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220920080746.26791-3-tsimpson@quicinc.com>
The semantics of a mem_noshuf packet are that the store effectively
happens before the load. However, in cases where the load raises an
exception, we cannot simply execute the store first.
This change adds a probe to check that the load will not raise an
exception before executing the store.
If the load is predicated, this requires special handling. We check
the condition before performing the probe. Since, we need the EA to
perform the check, we move the GET_EA portion inside CHECK_NOSHUF_PRED.
Test case added in tests/tcg/hexagon/mem_noshuf_exception.c
Suggested-by: Alessandro Di Federico <ale@rev.ng>
Suggested-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220707210546.15985-3-tsimpson@quicinc.com>
macros to interface with the generator
macros referenced in instruction semantics
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Change SET_USR_FIELD to write to hex_new_value[HEX_REG_USR] instead
of hex_gpr[HEX_REG_USR].
Then, we need code to mark the instructions that can set implicitly
set USR
- Macros added to hex_common.py
- A_FPOP added in translate.c
Test case added in tests/tcg/hexagon/overflow.c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Change additional tcg_const_tl to tcg_constant_tl
Note that gen_pred_cancal had slot_mask initialized with tcg_const_tl.
However, it is not constant throughout, so we initialize it with
tcg_temp_new and replace the first use with the constant value.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Inspired-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Replace uses of tcg_const_* with the allocate and free close together.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003004750.3608983-3-f4bug@amsat.org>
The gen_pred_cancel() function, introduced in commit a646e99cb9
(Hexagon macros) doesn't use the 'one' TCG temporary; remove it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003004750.3608983-2-f4bug@amsat.org>
Previously the store-conditional code was writing to hex_pred[prednum].
Then, the fGEN_TCG override was reading from there to the destination
variable so that the packet commit logic would handle it properly.
The correct implementation is to write to the destination variable
and don't have the extra read in the override.
Remove the unused arguments from gen_store_conditional[48]
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-4-git-send-email-tsimpson@quicinc.com>
Change fLSBNEW/fLSBNEW0/fLSBNEW1 from copy to "x & 1"
Remove gen_logical_not function
Clean up fLSBNEWNOT to use andi-1 followed by xori-1
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-2-git-send-email-tsimpson@quicinc.com>
The following instruction is added
S2_cabacdecbin Rdd32=decbin(Rss32,Rtt32)
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-27-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-9-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
macros to interface with the generator
macros referenced in instruction semantics
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-25-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
