For x86_64 user-only, there is no way to leave 64-bit mode.
Without x86_64, there is no way to enter 64-bit mode. There is
an existing macro to aid with that; simply place it in the right
place in the ifdef chain.
Since we're adding an accessor macro, pull the value directly out
of flags when we're not assuming a constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-13-richard.henderson@linaro.org>
For user-only, SS32 == !VM86, because we are never in
real-mode. Since we cannot enter vm86 mode for x86_64
user-only, SS32 is always set.
Since we're adding an accessor macro, pull the value
directly out of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-12-richard.henderson@linaro.org>
For user-only, CODE32 == !VM86, because we are never in real-mode.
Since we cannot enter vm86 mode for x86_64 user-only, CODE32 is
always set.
Since we're adding an accessor macro, pull the value directly out
of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-11-richard.henderson@linaro.org>
For i386-linux-user, we can enter vm86 mode via the vm86(2) syscall.
That syscall explicitly returns to 32-bit mode, and the syscall does
not exist for a 64-bit x86_64 executable.
Since we're adding an accessor macro, pull the value directly out of
flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-10-richard.henderson@linaro.org>
On real hardware, the linux kernel has the iopl(2) syscall which
can set IOPL to 3, to allow e.g. the xserver to briefly disable
interrupts while programming the graphics card.
However, QEMU cannot and does not implement this syscall, so the
IOPL is never changed from 0. Which means that all of the checks
vs CPL <= IOPL are false for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-9-richard.henderson@linaro.org>
A user-mode executable always runs in ring 3.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-8-richard.henderson@linaro.org>
A user-mode executable is never in real-mode. Since we're adding
an accessor macro, pull the value directly out of flags for sysemu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-7-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-6-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-5-richard.henderson@linaro.org>
In vm86 mode, we use the same helper as real-mode, but with
an extra check for IOPL. All non-exceptional paths set EFLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-4-richard.henderson@linaro.org>
Split out the check for CPL != 0 and the raising of #GP.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-3-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-2-richard.henderson@linaro.org>
Ram block notifiers are currently not aware of resizes. To properly
handle resizes during migration, we want to teach ram block notifiers about
resizeable ram.
Introduce the basic infrastructure but keep using max_size in the
existing notifiers. Supply the max_size when adding and removing ram
blocks. Also, notify on resizes.
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: xen-devel@lists.xenproject.org
Cc: haxm-team@intel.com
Cc: Paul Durrant <paul@xen.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Wenchao Wang <wenchao.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-3-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Unify the duplicate code between get_hphys and mmu_translate, by simply
making get_hphys call mmu_translate. This also fixes the support for
5-level nested page tables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to unify the two stages of page table lookup, we need
mmu_translate to use either the host CR0/EFER/CR4 or the guest's.
To do so, make mmu_translate use the same pg_mode constants that
were used for the NPT lookup.
This also prepares for adding 5-level NPT support, which however does
not work yet.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the page table lookup out of handle_mmu_fault, which only has
to invoke mmu_translate and either fill the TLB or deliver the page
fault.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will reuse the page walker for both SVM and regular accesses. To do
so we will build a function that receives the currently active paging
mode; start by including in cpu.h the constants and the function to go
from cr4/hflags/efer to the paging mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
while on x86 all CPU classes can use the same set of TCGCPUOps,
on ARM the right accel behavior depends on the type of the CPU.
So we need a way to specialize the accel behavior according to
the CPU. Therefore, add a second initialization, after the
accel_cpu->cpu_class_init, that allows to do this.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210322132800.7470-24-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cpu_load_efer is now used only for sysemu code.
Therefore, move this function implementation to
sysemu-only section of helper.c
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-22-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
a number of registers are read as 64bit under the condition that
(hflags & HF_CS64_MASK) || TARGET_X86_64)
and a number of registers are written as 64bit under the condition that
(hflags & HF_CS64_MASK).
Provide some auxiliary functions that do that.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-20-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now we just copy over the previous user stubs, but really,
everything that requires s->cpl == 0 should be impossible
to trigger from user-mode emulation.
Later on we should add a check that asserts this easily f.e.:
static bool check_cpl0(DisasContext *s)
{
int cpl = s->cpl;
#ifdef CONFIG_USER_ONLY
assert(cpl == 3);
#endif
if (cpl != 0) {
gen_exception(s, EXCP0D_GPF, s->pc_start - s->cs_base);
return false;
}
return true;
}
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-17-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
create a separate tcg/sysemu/fpu_helper.c for the sysemu-only parts.
For user mode, some small #ifdefs remain in tcg/fpu_helper.c
which do not seem worth splitting into their own user-mode module.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-16-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
for user-mode, assert that the hidden IOBPT flags are not set
while attempting to generate io_bpt helpers.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-14-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
smm is only really useful for sysemu, split in two modules
around the CONFIG_USER_ONLY, in order to remove the ifdef
and use the build system instead.
add cpu_abort() when detecting attempts to enter SMM mode via
SMI interrupt in user-mode, and assert that the cpu is not
in SMM mode while translating RSM instructions.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-12-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
overall, all devices' realize functions take an Error **errp, but return void.
hw/core/qdev.c code, which realizes devices, therefore does:
local_err = NULL;
dc->realize(dev, &local_err);
if (local_err != NULL) {
goto fail;
}
However, we can improve at least accel_cpu to return a meaningful bool value.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-9-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move the check for phys_bits outside of host_cpu_adjust_phys_bits,
because otherwise it is impossible to return an error condition
explicitly.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-8-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
avoid open coding the accesses to cpu->accel_cpu interfaces,
and instead introduce:
accel_cpu_instance_init,
accel_cpu_realizefn
to be used by the targets/ initfn code,
and by cpu_exec_realizefn respectively.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-7-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move the call to accel_cpu->cpu_realizefn to the general
cpu_exec_realizefn from target/i386, so it does not need to be
called for every target explicitly as we enable more targets.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-6-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
i386 is the first user of AccelCPUClass, allowing to split
cpu.c into:
cpu.c cpuid and common x86 cpu functionality
host-cpu.c host x86 cpu functions and "host" cpu type
kvm/kvm-cpu.c KVM x86 AccelCPUClass
hvf/hvf-cpu.c HVF x86 AccelCPUClass
tcg/tcg-cpu.c TCG x86 AccelCPUClass
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio]:
Rebased on commit b8184135 ("target/i386: allow modifying TCG phys-addr-bits")
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210322132800.7470-5-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The helper_* functions must use GETPC() to unwind from TCG.
The cpu_x86_* functions cannot, and directly calling the
helper_* functions is a bug. Split out new functions that
perform the work and can be used by both.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Tested-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210322132800.7470-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the prefix from "helper" to "do". The former should be
reserved for those functions that are called from TCG; the latter
is in use within the file already for those functions that are
called from the helper functions, adding a "retaddr" argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Tested-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210322132800.7470-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Found the following cpu feature bits missing from EPYC-Rome model.
ibrs : Indirect Branch Restricted Speculation
ssbd : Speculative Store Bypass Disable
These new features will be added in EPYC-Rome-v2. The -cpu help output
after the change.
x86 EPYC-Rome (alias configured by machine type)
x86 EPYC-Rome-v1 AMD EPYC-Rome Processor
x86 EPYC-Rome-v2 AMD EPYC-Rome Processor
Reported-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <161478622280.16275.6399866734509127420.stgit@bmoger-ubuntu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
These two opcodes only allow a memory operand.
Lacking the check for a register operand, we used the A0 temp
without initialization, which led to a tcg abort.
Buglink: https://bugs.launchpad.net/qemu/+bug/1921138
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210324164650.128608-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM doesn't fully support Hyper-V reenlightenment notifications on
migration. In particular, it doesn't support emulating TSC frequency
of the source host by trapping all TSC accesses so unless TSC scaling
is supported on the destination host and KVM_SET_TSC_KHZ succeeds, it
is unsafe to proceed with migration.
KVM_SET_TSC_KHZ is called from two sites: kvm_arch_init_vcpu() and
kvm_arch_put_registers(). The later (intentionally) doesn't propagate
errors allowing migrations to succeed even when TSC scaling is not
supported on the destination. This doesn't suit 're-enlightenment'
use-case as we have to guarantee that TSC frequency stays constant.
Require 'tsc-frequency=' command line option to be specified for successful
migration when re-enlightenment was enabled by the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210319123801.1111090-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even the name of this section is 'cpu/msr_hyperv_hypercall',
'hypercall_hypercall' is clearly a typo.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210318160249.1084178-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
env->error_code is only 32-bits wide, so the high 32 bits of EXITINFO1
are being lost. However, even though saving guest state and restoring
host state must be delayed to do_vmexit, because they might take tb_lock,
it is always possible to write to the VMCB. So do this for the exit
code and EXITINFO1, just like it is already being done for EXITINFO2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If kvm_arch_remove_sw_breakpoint finds that a software breakpoint does not
have an INT3 instruction, it fails. This can happen if one sets a
software breakpoint in a kernel module and then reloads it. gdb then
thinks the breakpoint cannot be deleted and there is no way to add it
back.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bus lock debug exception is a feature that can notify the kernel by
generate an #DB trap after the instruction acquires a bus lock when
CPL>0. This allows the kernel to enforce user application throttling or
mitigations.
This feature is enumerated via CPUID.(EAX=7,ECX=0).ECX[bit 24].
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210202090224.13274-1-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"+foo" or "-foo"
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-11-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds the support for AMD 3rd generation processors. The model
display for the new processor will be EPYC-Milan.
Adds the following new feature bits on top of the feature bits from
the first and second generation EPYC models.
pcid : Process context identifiers support
ibrs : Indirect Branch Restricted Speculation
ssbd : Speculative Store Bypass Disable
erms : Enhanced REP MOVSB/STOSB support
fsrm : Fast Short REP MOVSB support
invpcid : Invalidate processor context ID
pku : Protection keys support
svme-addr-chk : SVM instructions address check for #GP handling
Depends on the following kernel commits:
14c2bf81fcd2 ("KVM: SVM: Fix #GP handling for doubly-nested virtualization")
3b9c723ed7cf ("KVM: SVM: Add support for SVM instruction address check change")
4aa2691dcbd3 ("8ce1c461188799d863398dd2865d KVM: x86: Factor out x86 instruction emulation with decoding")
4407a797e941 ("KVM: SVM: Enable INVPCID feature on AMD")
9715092f8d7e ("KVM: X86: Move handling of INVPCID types to x86")
3f3393b3ce38 ("KVM: X86: Rename and move the function vmx_handle_memory_failure to x86.c")
830bd71f2c06 ("KVM: SVM: Remove set_cr_intercept, clr_cr_intercept and is_cr_intercept")
4c44e8d6c193 ("KVM: SVM: Add new intercept word in vmcb_control_area")
c62e2e94b9d4 ("KVM: SVM: Modify 64 bit intercept field to two 32 bit vectors")
9780d51dc2af ("KVM: SVM: Modify intercept_exceptions to generic intercepts")
30abaa88382c ("KVM: SVM: Change intercept_dr to generic intercepts")
03bfeeb988a9 ("KVM: SVM: Change intercept_cr to generic intercepts")
c45ad7229d13 ("KVM: SVM: Introduce vmcb_(set_intercept/clr_intercept/_is_intercept)")
a90c1ed9f11d ("(pcid) KVM: nSVM: Remove unused field")
fa44b82eb831 ("KVM: x86: Move MPK feature detection to common code")
38f3e775e9c2 ("x86/Kconfig: Update config and kernel doc for MPK feature on AMD")
37486135d3a7 ("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <161290460478.11352.8933244555799318236.stgit@bmoger-ubuntu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The CPUID function 1 has a bit called OSXSAVE which tells user space the
status of the CR4.OSXSAVE bit. Our generic CPUID function injects that bit
based on the status of CR4.
With Hypervisor.framework, we do not synchronize full CPU state often enough
for this function to see the CR4 update before guest user space asks for it.
To be on the save side, let's just always synchronize it when we receive a
CPUID(1) request. That way we can set the bit with real confidence.
Reported-by: Asad Ali <asad@osaro.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20210123004129.6364-1-agraf@csgraf.de>
[RB: resolved conflict with another CPUID change]
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some guests (ex. Darwin-XNU) can attemp to read this MSR to retrieve and
validate CPU topology comparing it to ACPI MADT content
MSR description from Intel Manual:
35H: MSR_CORE_THREAD_COUNT: Configured State of Enabled Processor Core
Count and Logical Processor Count
Bits 15:0 THREAD_COUNT The number of logical processors that are
currently enabled in the physical package
Bits 31:16 Core_COUNT The number of processor cores that are currently
enabled in the physical package
Bits 63:32 Reserved
Signed-off-by: Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
Message-Id: <20210113205323.33310-1-yaroshchuk2000@gmail.com>
[RB: reordered MSR definition and dropped u suffix from shift offset]
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hvf i386 has a few struct and cpp definitions that are never
used. Remove them.
Suggested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20210120224444.71840-3-agraf@csgraf.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For `-accel hvf` cpu_x86_cpuid() is wrapped with hvf_cpu_x86_cpuid() to
add paravirtualization cpuid leaf 0x40000010
https://lkml.org/lkml/2008/10/1/246
Leaf 0x40000010, Timing Information:
EAX: (Virtual) TSC frequency in kHz.
EBX: (Virtual) Bus (local apic timer) frequency in kHz.
ECX, EDX: RESERVED (Per above, reserved fields are set to zero).
On macOS TSC and APIC Bus frequencies can be readed by sysctl call with
names `machdep.tsc.frequency` and `hw.busfrequency`
This options is required for Darwin-XNU guest to be synchronized with
host
Leaf 0x40000000 not exposes HVF leaving hypervisor signature empty
Signed-off-by: Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
Message-Id: <20210122150518.3551-1-yaroshchuk2000@gmail.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This prevents illegal instruction on cpus that do not support xgetbv.
Buglink: https://bugs.launchpad.net/qemu/+bug/1758819
Reviewed-by: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Hill Ma <maahiuzeon@gmail.com>
Message-Id: <X/6OJ7qk0W6bHkHQ@Hills-Mac-Pro.local>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the sev_es_enabled() function return value to be based on the SEV
policy that has been specified. SEV-ES is enabled if SEV is enabled and
the SEV-ES policy bit is set in the policy object.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <c69f81c6029f31fc4c52a9f35f1bd704362476a5.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SMM is not currently supported for an SEV-ES guest by KVM. Change the SMM
capability check from a KVM-wide check to a per-VM check in order to have
a finer-grained SMM capability check.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <f851903809e9d4e6a22d5dfd738dac8da991e28d.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SEV-ES guest does not allow register state to be altered once it has
been measured. When an SEV-ES guest issues a reboot command, Qemu will
reset the vCPU state and resume the guest. This will cause failures under
SEV-ES. Prevent that from occuring by introducing an arch-specific
callback that returns a boolean indicating whether vCPUs are resettable.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <1ac39c441b9a3e970e9556e1cc29d0a0814de6fd.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SEV-ES is enabled, it is not possible modify the guests register
state after it has been initially created, encrypted and measured.
Normally, an INIT-SIPI-SIPI request is used to boot the AP. However, the
hypervisor cannot emulate this because it cannot update the AP register
state. For the very first boot by an AP, the reset vector CS segment
value and the EIP value must be programmed before the register has been
encrypted and measured. Search the guest firmware for the guest for a
specific GUID that tells Qemu the value of the reset vector to use.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <22db2bfb4d6551aed661a9ae95b4fdbef613ca21.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In prep for AP booting, require the use of in-kernel irqchip support. This
lessens the Qemu support burden required to boot APs.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <e9aec5941e613456f0757f5a73869cdc5deea105.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide initial support for SEV-ES. This includes creating a function to
indicate the guest is an SEV-ES guest (which will return false until all
support is in place), performing the proper SEV initialization and
ensuring that the guest CPU state is measured as part of the launch.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Co-developed-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <2e6386cbc1ddeaf701547dd5677adf5ddab2b6bd.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the gpa isn't specified, it's value is extracted from the OVMF
properties table located below the reset vector (and if this doesn't
exist, an error is returned). OVMF has defined the GUID for the SEV
secret area as 4c2eb361-7d9b-4cc3-8081-127c90d3d294 and the format of
the <data> is: <base>|<size> where both are uint32_t. We extract
<base> and use it as the gpa for the injection.
Note: it is expected that the injected secret will also be GUID
described but since qemu can't interpret it, the format is left
undefined here.
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210204193939.16617-3-jejb@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OVMF is developing a mechanism for depositing a GUIDed table just
below the known location of the reset vector. The table goes
backwards in memory so all entries are of the form
<data>|len|<GUID>
Where <data> is arbtrary size and type, <len> is a uint16_t and
describes the entire length of the entry from the beginning of the
data to the end of the guid.
The foot of the table is of this form and <len> for this case
describes the entire size of the table. The table foot GUID is
defined by OVMF as 96b582de-1fb2-45f7-baea-a366c55a082d and if the
table is present this GUID is just below the reset vector, 48 bytes
before the end of the firmware file.
Add a parser for the ovmf reset block which takes a copy of the block,
if the table foot guid is found, minus the footer and a function for
later traversal to return the data area of any specified GUIDs.
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210204193939.16617-2-jejb@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expose the VMX exit/entry load pkrs control bits in
VMX_TRUE_EXIT_CTLS/VMX_TRUE_ENTRY_CTLS MSRs to guest, which supports the
PKS in nested VM.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210205083325.13880-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PKS introduces MSR IA32_PKRS(0x6e1) to manage the supervisor protection
key rights. Page access and writes can be managed via the MSR update
without TLB flushes when permissions change.
Add the support to save/load IA32_PKRS MSR in guest.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210205083325.13880-2-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Protection Keys for Supervisor-mode pages is a simple extension of
the PKU feature that QEMU already implements. For supervisor-mode
pages, protection key restrictions come from a new MSR. The MSR
has no XSAVE state associated to it.
PKS is only respected in long mode. However, in principle it is
possible to set the MSR even outside long mode, and in fact
even the XSAVE state for PKRU could be set outside long mode
using XRSTOR. So do not limit the migration subsections for
PKRU and PKRS to long mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes a translation bug for a subset of x86 BMI instructions
such as the following:
c4 e2 f9 f7 c0 shlxq %rax, %rax, %rax
Currently, these incorrectly generate an undefined instruction exception
when SSE is disabled via CR4, while instructions like "shrxq" work fine.
The problem appears to be related to BMI instructions encoded using VEX
and with a mandatory prefix of "0x66" (data). Instructions with this
data prefix (such as shlxq) are currently rejected. Instructions with
other mandatory prefixes (such as shrxq) translate as expected.
This patch removes the incorrect check in "gen_sse" that causes the
exception to be generated. For the non-BMI cases, the check is
redundant: prefixes are already checked at line 3696.
Buglink: https://bugs.launchpad.net/qemu/+bug/1748296
Signed-off-by: David Greenaway <dgreenaway@google.com>
Message-Id: <20210114063958.1508050-1-dgreenaway@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer AMD CPUs will add CPUID_0x8000000A_EDX[28] bit, which indicates
that SVM instructions (VMRUN/VMSAVE/VMLOAD) will trigger #VMEXIT before
CPU checking their EAX against reserved memory regions. This change will
allow the hypervisor to avoid intercepting #GP and emulating SVM
instructions. KVM turns on this CPUID bit for nested VMs. In order to
support it, let us populate this bit, along with other SVM feature bits,
in FEAT_SVM.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20210126202456.589932-1-wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
32-bit targets by definition do not support long mode; therefore, the
bit must be masked in the features supported by the accelerator.
As a side effect, this avoids setting up the 0x80000008 CPUID leaf
for
qemu-system-i386 -cpu host
which since commit 5a140b255d ("x86/cpu: Use max host physical address
if -cpu max option is applied") would have printed this error:
qemu-system-i386: phys-bits should be between 32 and 36 (but is 48)
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While we've abstracted some (potential) differences between mechanisms for
securing guest memory, the initialization is still specific to SEV. Given
that, move it into x86's kvm_arch_init() code, rather than the generic
kvm_init() code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The platform specific details of mechanisms for implementing
confidential guest support may require setup at various points during
initialization. Thus, it's not really feasible to have a single cgs
initialization hook, but instead each mechanism needs its own
initialization calls in arch or machine specific code.
However, to make it harder to have a bug where a mechanism isn't
properly initialized under some circumstances, we want to have a
common place, late in boot, where we verify that cgs has been
initialized if it was requested.
This patch introduces a ready flag to the ConfidentialGuestSupport
base type to accomplish this, which we verify in
qemu_machine_creation_done().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
This allows failures to be reported richly and idiomatically.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Currently the "memory-encryption" property is only looked at once we
get to kvm_init(). Although protection of guest memory from the
hypervisor isn't something that could really ever work with TCG, it's
not conceptually tied to the KVM accelerator.
In addition, the way the string property is resolved to an object is
almost identical to how a QOM link property is handled.
So, create a new "confidential-guest-support" link property which sets
this QOM interface link directly in the machine. For compatibility we
keep the "memory-encryption" property, but now implemented in terms of
the new property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When AMD's SEV memory encryption is in use, flash memory banks (which are
initialed by pc_system_flash_map()) need to be encrypted with the guest's
key, so that the guest can read them.
That's abstracted via the kvm_memcrypt_encrypt_data() callback in the KVM
state.. except, that it doesn't really abstract much at all.
For starters, the only call site is in code specific to the 'pc'
family of machine types, so it's obviously specific to those and to
x86 to begin with. But it makes a bunch of further assumptions that
need not be true about an arbitrary confidential guest system based on
memory encryption, let alone one based on other mechanisms:
* it assumes that the flash memory is defined to be encrypted with the
guest key, rather than being shared with hypervisor
* it assumes that that hypervisor has some mechanism to encrypt data into
the guest, even though it can't decrypt it out, since that's the whole
point
* the interface assumes that this encrypt can be done in place, which
implies that the hypervisor can write into a confidential guests's
memory, even if what it writes isn't meaningful
So really, this "abstraction" is actually pretty specific to the way SEV
works. So, this patch removes it and instead has the PC flash
initialization code call into a SEV specific callback.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Several architectures have mechanisms which are designed to protect
guest memory from interference or eavesdropping by a compromised
hypervisor. AMD SEV does this with in-chip memory encryption and
Intel's TDX can do similar things. POWER's Protected Execution
Framework (PEF) accomplishes a similar goal using an ultravisor and
new memory protection features, instead of encryption.
To (partially) unify handling for these, this introduces a new
ConfidentialGuestSupport QOM base class. "Confidential" is kind of vague,
but "confidential computing" seems to be the buzzword about these schemes,
and "secure" or "protected" are often used in connection to unrelated
things (such as hypervisor-from-guest or guest-from-guest security).
The "support" in the name is significant because in at least some of the
cases it requires the guest to take specific actions in order to protect
itself from hypervisor eavesdropping.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will allow us to centralize the registration of
the cpus.c module accelerator operations (in accel/accel-softmmu.c),
and trigger it automatically using object hierarchy lookup from the
new accel_init_interfaces() initialization step, depending just on
which accelerators are available in the code.
Rename all tcg-cpus.c, kvm-cpus.c, etc to tcg-accel-ops.c,
kvm-accel-ops.c, etc, matching the object type names.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-18-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QEMU option -cpu max(max_features) means "Enables all features supported by
the accelerator in the current host", this looks true for all the features
except guest max physical address width, so add this patch to enable it.
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20210113090430.26394-1-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the dedicated X86Seg enum type for segment registers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210109233427.749748-1-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This struct only used in whpx-apic.c, there is no need
expose it in whpx.h.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20210107101919.80-6-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only leave the external interface in sysemu/whpx.h. whpx_apic_in_platform
is moved to a .c file because it needs whpx_state.
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201219090637.1700900-3-pbonzini@redhat.com>
Rename the file in preparation for moving more implementation-internal
definitions to it. The build is still broken though.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201219090637.1700900-2-pbonzini@redhat.com>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the 'int N' instruction is executed in protected mode, the
pseudocode in the architecture manual specifies that we need to check:
* vector number within IDT limits
* selected IDT descriptor is a valid type (interrupt, trap or task gate)
* if this was a software interrupt then gate DPL < CPL
The way we had structured the code meant that the privilege check for
software interrupts ended up not in the code path taken for task gate
handling, because all of the task gate handling code was in the 'case 5'
of the switch which was checking "is this descriptor a valid type".
Move the task gate handling code out of that switch (so that it is now
purely doing the "valid type?" check) and below the software interrupt
privilege check.
The effect of this missing check was that in a guest userspace binary
executing 'int 8' would cause a guest kernel panic rather than the
userspace binary being handed a SEGV.
This is essentially the same bug fixed in VirtualBox in 2012:
https://www.halfdog.net/Security/2012/VirtualBoxSoftwareInterrupt0x8GuestCrash/
Note that for QEMU this is not a security issue because it is only
present when using TCG.
Fixes: https://bugs.launchpad.net/qemu/+bug/1813201
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201121224445.16236-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The current "#ifdef TARGET_X86_64" statement affects
the compiler's determination of fall through.
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
target/i386/translate.c: In function ‘gen_shiftd_rm_T1’:
target/i386/translate.c:1773:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (is_right) {
^
target/i386/translate.c:1782:5: note: here
case MO_32:
^~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201211152426.350966-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
make it a regular function.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201212155530.23098-9-cfontana@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
to do this, we need to take code out of cpu.c and helper.c,
and also move some prototypes from cpu.h, for code that is
needed in tcg/xxx_helper.c, and which in turn is part of the
callbacks registered by the class initialization.
Therefore, do some shuffling of the parts of cpu.h that
are only relevant for tcg/, and put them in tcg/helper-tcg.h
For FT0 and similar macros, put them in tcg/fpu-helper.c
since they are used only there.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201212155530.23098-8-cfontana@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
AVX512 Half-precision floating point (FP16) has better performance
compared to FP32 if the presicion or magnitude requirements are met.
It's defined as CPUID.(EAX=7,ECX=0):EDX[bit 23].
Refer to
https://software.intel.com/content/www/us/en/develop/download/\
intel-architecture-instruction-set-extensions-programming-reference.html
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Message-Id: <20201216224002.32677-1-cathy.zhang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As a preparation to expanding Hyper-V CPU features early, move
hyperv_limits initialization to x86_cpu_realizefn().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201119103221.1665171-5-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As a preparation to expanding Hyper-V CPU features early, move
hyperv_version_id initialization to x86_cpu_realizefn().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201119103221.1665171-4-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As a preparation to expanding Hyper-V CPU features early, move
hyperv_interface_id initialization to x86_cpu_realizefn().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201119103221.1665171-3-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As a preparation to expanding Hyper-V CPU features early, move
hyperv_vendor_id initialization to x86_cpu_realizefn(). Introduce
x86_cpu_hyperv_realize() to not not pollute x86_cpu_realizefn()
itself.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201119103221.1665171-2-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Also, the hundreds of instance properties were having an impact
on QMP commands that create temporary CPU objects. On my
machine, run time of qmp_query_cpu_definitions() changed
from ~200ms to ~16ms after applying this patch.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201111183823.283752-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Three trace events had a literal "0x" prefix but the 'len' values were
formatted in decimal base. Keep the prefix and format the numbers as
hex, as is usually the case for length of memory regions.
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201103100745.160409-1-dovmurik@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current implementation will disable the guest Intel PT feature
if the Intel PT LIP feature is supported on the host, but the LIP
feature is comming soon(e.g. SnowRidge and later).
This patch will make the guest LIP feature configurable and Intel
PT feature can be enabled in guest when the guest LIP status same
with the host.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <20201202101042.11967-1-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
AMD SEV allows a guest owner to inject a secret blob
into the memory of a virtual machine. The secret is
encrypted with the SEV Transport Encryption Key and
integrity is guaranteed with the Transport Integrity
Key. Although QEMU facilitates the injection of the
launch secret, it cannot access the secret.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20201027170303.47550-1-tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds support the kernel-irqchip option for
WHPX with on or off value. 'split' value is not supported
for the option. The option only works for the latest version
of Windows (ones that are coming out on Insiders). The
change maintains backward compatibility on older version of
Windows where this option is not supported.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880B13258DA9251F8459F4DC0170@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per the SDM, when returning to outer privilege level, for segment
registers (ES, FS, GS, and DS) if the check fails, the segment
selector becomes null, but QEMU clears the base/limit/flags as well
as nullifying the segment selector, which should be a spec violation.
Real hardware seems to be compliant with the spec, at least on one
Coffee Lake board I tested.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <1605261378-77971-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IOAPIC has an 'Extended Destination ID' field in its RTE, which maps
to bits 11-4 of the MSI address. Since those address bits fall within a
given 4KiB page they were historically non-trivial to use on real hardware.
The Intel IOMMU uses the lowest bit to indicate a remappable format MSI,
and then the remaining 7 bits are part of the index.
Where the remappable format bit isn't set, we can actually use the other
seven to allow external (IOAPIC and MSI) interrupts to reach up to 32768
CPUs instead of just the 255 permitted on bare metal.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <78097f9218300e63e751e077a0a5ca029b56ba46.camel@infradead.org>
[Fix UBSAN warning. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
For PDEP and PEXT, the mask is provided in the memory (mod+r/m)
operand, and therefore is loaded in s->T0 by gen_ldst_modrm.
The source is provided in the second source operand (VEX.vvvv)
and therefore is loaded in s->T1. Fix the order in which
they are passed to the helpers.
Reported-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Analyzed-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1605123
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Requested Privilege Level field is 2 bits, the Table Indicator field
is 1 bit and the Index field is the remaining 15 bits, with TI=0 meaning
GDT and TI=1 meaning LDT.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20201116200414.28286-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_strdup_printf is used twice to write to the same variable, which
can theoretically cause a leak. In practice, it is extremely
unlikely that a guest is seeing a recursive MCE and has disabled
CR4.MCE between the first and the second error, but we can fix it
and we can also make a slight improvement on the logic: CR4.MCE=0
causes a triple fault even for a non-recursive machine check, so
let's place its test first.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the nested state format is hardcoded to VMX. This will result
in kvm_put_nested_state() returning an error because the KVM SVM support
checks for the nested state to be KVM_STATE_NESTED_FORMAT_SVM. As a
result, kvm_arch_put_registers() errors out early.
Update the setting of the format based on the virtualization feature:
VMX - KVM_STATE_NESTED_FORMAT_VMX
SVM - KVM_STATE_NESTED_FORMAT_SVM
Also, fix the code formatting while at it.
Fixes: b16c0e20c7 ("KVM: add support for AMD nested live migration")
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <fe53d00fe0d884e812960781284cd48ae9206acc.1605546140.git.thomas.lendacky@amd.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124012.20035-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122801.19514-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
mon_get_cpu_env() is indirectly called monitor_parse_arguments() where
the current monitor isn't set yet. Instead of using monitor_cur_env(),
explicitly pass the Monitor pointer to the function.
Without this fix, an HMP command like "x $pc" crashes like this:
#0 0x0000555555caa01f in mon_get_cpu_sync (mon=0x0, synchronize=true) at ../monitor/misc.c:270
#1 0x0000555555caa141 in mon_get_cpu (mon=0x0) at ../monitor/misc.c:294
#2 0x0000555555caa158 in mon_get_cpu_env () at ../monitor/misc.c:299
#3 0x0000555555b19739 in monitor_get_pc (mon=0x555556ad2de0, md=0x5555565d2d40 <monitor_defs+1152>, val=0) at ../target/i386/monitor.c:607
#4 0x0000555555cadbec in get_monitor_def (mon=0x555556ad2de0, pval=0x7fffffffc208, name=0x7fffffffc220 "pc") at ../monitor/misc.c:1681
#5 0x000055555582ec4f in expr_unary (mon=0x555556ad2de0) at ../monitor/hmp.c:387
#6 0x000055555582edbb in expr_prod (mon=0x555556ad2de0) at ../monitor/hmp.c:421
#7 0x000055555582ee79 in expr_logic (mon=0x555556ad2de0) at ../monitor/hmp.c:455
#8 0x000055555582eefe in expr_sum (mon=0x555556ad2de0) at ../monitor/hmp.c:484
#9 0x000055555582efe8 in get_expr (mon=0x555556ad2de0, pval=0x7fffffffc418, pp=0x7fffffffc408) at ../monitor/hmp.c:511
#10 0x000055555582fcd4 in monitor_parse_arguments (mon=0x555556ad2de0, endp=0x7fffffffc890, cmd=0x555556675b50 <hmp_cmds+7920>) at ../monitor/hmp.c:876
#11 0x00005555558306a8 in handle_hmp_command (mon=0x555556ad2de0, cmdline=0x555556ada452 "$pc") at ../monitor/hmp.c:1087
#12 0x000055555582df14 in monitor_command_cb (opaque=0x555556ad2de0, cmdline=0x555556ada450 "x $pc", readline_opaque=0x0) at ../monitor/hmp.c:47
After this fix, nothing is left in monitor_parse_arguments() that can
indirectly call monitor_cur(), so the fix is complete.
Fixes: ff04108a0e
Reported-by: lichun <lichun@ruijie.com.cn>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-4-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All of these callbacks use mon_get_cpu_env(). Pass the Monitor
pointer to them it in preparation for adding a monitor argument to
mon_get_cpu_env().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-3-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
mon_get_cpu() is indirectly called monitor_parse_arguments() where
the current monitor isn't set yet. Instead of using monitor_cur(),
explicitly pass the Monitor pointer to the function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-2-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
during my split of cpus.c, code line
"current_cpu = cpu"
was removed by mistake, causing hax to break.
This commit fixes the situation restoring it.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Fixes: e92558e4bf
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20201016080032.13914-1-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Icelake-Client CPU models will be removed in the future.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1600758855-80046-2-git-send-email-robert.hu@linux.intel.com>
[ehabkost: reword deprecation note, fix version in doc]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implement the ability of marking some versions deprecated. When
that CPU model is chosen, print a warning. The warning message
can be customized, e.g. suggesting an alternative CPU model to be
used instead.
The deprecation message will be printed by x86_cpu_list_entry(),
e.g. '-cpu help'.
QMP command 'query-cpu-definitions' will return a bool value
indicating the deprecation status.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1600758855-80046-1-git-send-email-robert.hu@linux.intel.com>
[ehabkost: reword commit message]
[ehabkost: Handle NULL cpu_type]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As IRQ routing is always available on x86,
kvm_allows_irq0_override() will always return true, so we don't
need the function anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200922201922.2153598-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM_CAP_IRQ_ROUTING is always available on x86, so replace checks
for kvm_has_gsi_routing() and KVM_CAP_IRQ_ROUTING with asserts.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200922201922.2153598-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM_CAP_IRQ_ROUTING is available since 2009 (Linux v2.6.30), so
it's safe to just make it a requirement on x86.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200922201922.2153598-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With x2apic enabled, configurations can have more that 255 cores.
Noticed the device add test is hitting an assert when during cpu
hotplug with core_id > 255. This is due to assert check in the
CPUID 0x8000001E.
Remove the assert check and fix the problem.
Fixes the bug:
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1834200
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <160072824160.9666.8890355282135970684.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Fix typo to use correct edx value for FEATURE_HYPERV_EDX when
hyperv_passthrough is enabled.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Message-Id: <20190820103030.12515-1-zhenyuw@linux.intel.com>
Fixes: e48ddcc6ce ("i386/kvm: implement 'hv-passthrough' mode")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We only use x86_cpu_get_supported_feature_word() after its implementation,
no forward declaration needed.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200904145431.196885-3-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200921221045.699690-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Missed in commit 41fba1618b "docs/system: convert the documentation of
deprecated features to rST."
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200929075824.1517969-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
kvm: uses the generic handler
qtest: uses the generic handler
whpx: changed to use the generic handler (identical implementation)
hax: changed to use the generic handler (identical implementation)
hvf: changed to use the generic handler (identical implementation)
tcg: adapt tcg-cpus to point to the tcg-specific handler
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for HVF as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for WHPX as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for HAX as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Post memory failure event through QMP to handle hardware memory corrupted
event. Rather than simply printing to the log, QEMU could report more
effective message to the client. For example, if a guest receives an MCE,
evacuating the host could be a good idea.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200930100440.1060708-4-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously we would only get a simple string "Triple fault" in qemu
log. Add detailed message for the two reasons to describe why qemu
has to reset the guest.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200930100440.1060708-2-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paravirtualized features have been listed in KVM_GET_SUPPORTED_CPUID since
Linux 2.6.35 (commit 84478c829d0f, "KVM: x86: export paravirtual cpuid flags
in KVM_GET_SUPPORTED_CPUID", 2010-05-19). It has been more than 10 years,
so remove the fallback code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU's kvmclock device is only created when KVM PV feature bits for
kvmclock (KVM_FEATURE_CLOCKSOURCE/KVM_FEATURE_CLOCKSOURCE2) are
exposed to the guest. With 'kvm=off' cpu flag the device is not
created and we don't call KVM_GET_CLOCK/KVM_SET_CLOCK upon migration.
It was reported that without these call at least Hyper-V TSC page
clocksouce (which can be enabled independently) gets broken after
migration.
Switch to creating kvmclock QEMU device unconditionally, it seems
to always make sense to call KVM_GET_CLOCK/KVM_SET_CLOCK on migration.
Use KVM_CAP_ADJUST_CLOCK check instead of CPUID feature bits.
Reported-by: Antoine Damhet <antoine.damhet@blade-group.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200922151934.899555-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VM with interrupt based APF enabled fails to migrate:
qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0xf3
We have two issues:
1) There is a typo in kvm_put_msrs() and we write async_pf_int_msr
to MSR_KVM_ASYNC_PF_EN (instead of MSR_KVM_ASYNC_PF_INT)
2) We restore MSR_KVM_ASYNC_PF_EN before MSR_KVM_ASYNC_PF_INT is set
and this violates the check in KVM.
Re-order MSR_KVM_ASYNC_PF_EN/MSR_KVM_ASYNC_PF_INT setting (and
kvm_get_msrs() for consistency) and fix the typo.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200917102316.814804-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception_is_int flag may be set on entry to helper_syscall,
e.g. after a prior interrupt that has returned, and processing
EXCP_SYSCALL as an interrupt causes it to fail so clear this flag.
Signed-off-by: Douglas Crosher <dtc-ubuntu@scieneer.com>
Message-Id: <a7dab33e-eda6-f988-52e9-f3d32db7538d@scieneer.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per Intel SDM vol 1, 13.2, if CPUID.1:ECX.XSAVE[bit 26] is 0, the
processor provides no further enumeration through CPUID function 0DH.
QEMU does not do this for "-cpu host,-xsave".
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200716082019.215316-2-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux-5.8 introduced interrupt based mechanism for 'page ready' events
delivery and disabled the old, #PF based one (see commit 2635b5c4a0e4
"KVM: x86: interrupt based APF 'page ready' event delivery"). Linux
guest switches to using in in 5.9 (see commit b1d405751cd5 "KVM: x86:
Switch KVM guest to using interrupts for page ready APF delivery").
The feature has a new KVM_FEATURE_ASYNC_PF_INT bit assigned and
the interrupt vector is set in MSR_KVM_ASYNC_PF_INT MSR. Support this
in QEMU.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908141206.357450-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer versions of WHPX provide the capability to query the tsc
and apic frequency. Expose these through the vmware cpuid leaf.
This patch doesnt support setting the tsc frequency; that will
come as a separate fix.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB08808DFDDC3F442BBEAADFF4C0710@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.
Unfortunately the object_property_add / object_class_property_add
methods call object_property_find / object_class_property_find methods
to check if a property exists already before adding the new property.
As a result there are a huge number of calls to error_setg_internal
on startup of most QEMU commands, making it very painful to set a
breakpoint on this method.
Most callers of object_find_property and object_class_find_property,
however, pass in a NULL for the Error parameter. This simplifies the
methods to remove the Error parameter entirely, and then adds some
new wrapper methods that are able to raise an Error when needed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200914135617.1493072-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
apic_id contains all the information required to build
CPUID_8000_001E. core_id and node_id is already part of
apic_id generated by x86_topo_ids_from_apicid.
Also remove the restriction on number bits on core_id and
node_id.
Remove all the hardcoded values and replace with generalized
fields.
Refer the Processor Programming Reference (PPR) documentation
available from the bugzilla Link below.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Message-Id: <159897585257.30750.5815593918927986935.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Remove all the hardcoded values and replace with generalized
fields.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <159897584649.30750.3939159632943292252.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Hyper-V TLFS prior to version 6.0 had a mistake in it: special value
'0xffffffff' for CPUID 0x40000004.EBX was called 'never to retry', this
looked weird (like why it's not '0' which supposedly have the same effect?)
but nobody raised the question. In TLFS version 6.0 the mistake was
corrected to 'never notify' which sounds logical. Fix QEMU accordingly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200515114847.74523-1-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's make this file compilable with -Werror=implicit-fallthrough :
Looking at the code, it seems like the fallthrough is intended here,
so we should add the corresponding "/* fallthrough */" comment here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200911125301.413081-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to use inclusive terminology, rename host_tsx_blacklisted()
as host_tsx_broken().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200910070131.435543-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit c24a41bb53.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889937478.21294.4192291354416942986.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit dd08ef0318.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889936257.21294.1786224705357428082.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 0c1538cb1a.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889935015.21294.1425332462852607813.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 247b18c593.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889933756.21294.13999336052652073520.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 7b225762c8.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Also fix all the references of pkg_offset.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889933119.21294.8112825730577505757.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some QOM macros were using a X86_IOMMU_DEVICE prefix, and others
were using a X86_IOMMU prefix. Rename all of them to use the
same X86_IOMMU_DEVICE prefix.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-47-ehabkost@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move typedef closer to the type check macros, to make it easier
to convert the code to OBJECT_DEFINE_TYPE() in the future.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-20-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Quoting ISO C99 6.7.8p4, "All the expressions in an initializer for an
object that has static storage duration shall be constant expressions or
string literals".
The compound literal produced by the make_floatx80() macro is not such a
constant expression, per 6.6p7-9. (An implementation may accept it,
according to 6.6p10, but is not required to.)
Therefore using "floatx80_zero" and make_floatx80() for initializing
"f2xm1_table" and "fpatan_table" is not portable. And gcc-4.8 in RHEL-7.6
actually chokes on them:
> target/i386/fpu_helper.c:871:5: error: initializer element is not constant
> { make_floatx80(0xbfff, 0x8000000000000000ULL),
> ^
We've had the make_floatx80_init() macro for this purpose since commit
3bf7e40ab9 ("softfloat: fix for C99", 2012-03-17), so let's use that
macro again.
Fixes: eca30647fc ("target/i386: reimplement f2xm1 using floatx80 operations")
Fixes: ff57bb7b63 ("target/i386: reimplement fpatan using floatx80 operations")
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Link: https://lists.gnu.org/archive/html/qemu-devel/2017-08/msg06566.html
Link: https://lists.gnu.org/archive/html/qemu-devel/2020-07/msg04714.html
Message-Id: <20200716144251.23004-1-lersek@redhat.com>
Message-Id: <20200724064509.331-8-alex.bennee@linaro.org>
We forgot to update cc_op before these branch insns,
which lead to losing track of the current eflags.
Buglink: https://bugs.launchpad.net/qemu/+bug/1888165
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200720154028.477457-1-richard.henderson@linaro.org>
HF2_GIF_MASK is set in env->hflags2 unconditionally on CPU reset
(see x86_cpu_reset()) but when calling KVM_SET_NESTED_STATE,
KVM_STATE_NESTED_GIF_SET is only valid for nSVM as e.g. nVMX code
looks like
if (kvm_state->hdr.vmx.vmxon_pa == -1ull) {
if (kvm_state->flags & ~KVM_STATE_NESTED_EVMCS)
return -EINVAL;
}
Also, when adjusting the environment after KVM_GET_NESTED_STATE we
need not reset HF2_GIF_MASK on VMX as e.g. x86_cpu_pending_interrupt()
expects it to be set.
Alternatively, we could've made env->hflags2 SVM-only.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: b16c0e20c7 ("KVM: add support for AMD nested live migration")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200723142701.2521161-1-vkuznets@redhat.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add the missing vmx features in Skylake-Server and Cascadelake-Server
CPU models based on the output of Paolo's script.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20200714084148.26690-4-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add the missing features(sha_ni, avx512ifma, rdpid, fsrm,
vmx-rdseed-exit, vmx-pml, vmx-eptp-switching) and change the model
number to 106 in the Icelake-Server-v4 CPU model.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20200714084148.26690-3-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
For CPUs support fast short REP MOV[CPUID.(EAX=7,ECX=0):EDX(bit4)], e.g
Icelake and Tigerlake, expose it to the guest VM.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20200714084148.26690-2-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Features unavailable due to absent of their dependent features should
not be added to env->user_features. env->user_features only contains the
feature explicity specified with -feature/+feature by user.
Fixes: 99e24dbdaa ("target/i386: introduce generic feature dependency mechanism")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200713174436.41070-3-xiaoyao.li@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
