The handling for CPUID function 0xD (supported XSAVE features) was
improved in a recent patch. Unfortunately, this appears to have
introduced undefined behaviour for cases where ecx > 30, as the result
of (1 << idx) is undefined if idx > 30.
Per Intel SDM section 13.2, the behaviour for ecx values up to and
including 62 are specified. This change therefore specifically sets
all registers returned by the CPUID instruction to 0 for 63 and higher.
Furthermore, the bit shift uses uint64_t, where behaviour for the entire
range of 2..62 is safe and correct.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-3-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support for x2APIC mode was recently introduced in the software emulated
APIC implementation for TCG. Enabling it when using macOS’s hvf
accelerator is useful and significantly helps performance, as Qemu
currently uses the emulated APIC when running on hvf as well.
This change wires up the read & write operations for the MSR VM exits
and allow-lists the CPUID flag in the x86 hvf runtime.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-2-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for overflow as well as allocation failure. Resolves Coverity CID 1564859.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for overflow to avoid that fseek() receives a sign-extended value.
Cc: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit b56617bbcb ("target/i386: Walk NPT in guest real mode") added
logic to run the page table walker even in real mode if we are in NPT
mode. That function then determined whether real mode or paging is
active based on whether the pg_mode variable was 0.
Unfortunately pg_mode is 0 in two situations:
1) Paging is disabled (real mode)
2) Paging is in 2-level paging mode (32bit without PAE)
That means the walker now assumed that 2-level paging mode was real
mode, breaking NetBSD as well as Windows XP.
To fix that, this patch adds a new PG flag to pg_mode which indicates
whether paging is active at all and uses that to determine whether we
are in real mode or not.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2654
Fixes: b56617bbcb ("target/i386: Walk NPT in guest real mode")
Signed-off-by: Alexander Graf <graf@amazon.com>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Link: https://lore.kernel.org/r/20241106154329.67218-1-graf@amazon.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SHA512, SM3, SM4 (CPUID[EAX=7,ECX=1).EAX bits 0 to 2) is supported by
Clearwater Forest processor, add it to QEMU as it does not need any
specific enablement.
See https://lore.kernel.org/kvm/20241105054825.870939-1-tao1.su@linux.intel.com/
for reference.
Reviewed-by: Tao Su <tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* rust: integration tests
* rust/pl011: add support for migration
* rust/pl011: add TYPE_PL011_LUMINARY device
* rust: add support for older compilers and bindgen
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcrrtIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPIBwf/W0Jo87UauGYufhEmoPvWG1EAQEqP
EzNTzem9Iw92VdiSTkAtED0/TSd8RBJOwDfjjusVXZtuMPwpRNgXaFhYTT5gFTMj
Nk3NZGaX/mbNrtdrukdx9mvUWeovytdZDZccTNkpc3oyiqY9NEz06wZ0tCNJEot6
qO3dEtKXTOQTdx2R3o0oS+2OFDGEEPxZ0PuXN3sClN4iZhGfcIDsjGAWxEh6mCDy
VxqKPdax1Ig1w7M+JMclnpOsVHwcefjHiToNPwhCEGelJ9BZilkViuvBzsVRJJz3
ptYyywBE0FT8MiKQ/wyf7U64qoizJuIgHoQnUGj98hdgvbUUiW5jcBNY3A==
=s591
-----END PGP SIGNATURE-----
Merge tag 'for-upstream-rust' of https://gitlab.com/bonzini/qemu into staging
* rust: cleanups
* rust: integration tests
* rust/pl011: add support for migration
* rust/pl011: add TYPE_PL011_LUMINARY device
* rust: add support for older compilers and bindgen
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcrrtIUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPIBwf/W0Jo87UauGYufhEmoPvWG1EAQEqP
# EzNTzem9Iw92VdiSTkAtED0/TSd8RBJOwDfjjusVXZtuMPwpRNgXaFhYTT5gFTMj
# Nk3NZGaX/mbNrtdrukdx9mvUWeovytdZDZccTNkpc3oyiqY9NEz06wZ0tCNJEot6
# qO3dEtKXTOQTdx2R3o0oS+2OFDGEEPxZ0PuXN3sClN4iZhGfcIDsjGAWxEh6mCDy
# VxqKPdax1Ig1w7M+JMclnpOsVHwcefjHiToNPwhCEGelJ9BZilkViuvBzsVRJJz3
# ptYyywBE0FT8MiKQ/wyf7U64qoizJuIgHoQnUGj98hdgvbUUiW5jcBNY3A==
# =s591
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 06 Nov 2024 18:00:50 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream-rust' of https://gitlab.com/bonzini/qemu: (39 commits)
dockerfiles: install bindgen from cargo on Ubuntu 22.04
rust: make rustfmt optional
rust: allow older version of bindgen
rust: do not use --generate-cstr
rust: allow version 1.63.0 of rustc
rust: clean up detection of the language
rust: do not use MaybeUninit::zeroed()
rust: introduce alternative implementation of offset_of!
rust: create a cargo workspace
rust: synchronize dependencies between subprojects and Cargo.lock
rust: silence unknown warnings for the sake of old compilers
rust: introduce a c_str macro
rust: use std::os::raw instead of core::ffi
rust: fix cfgs of proc-macro2 for 1.63.0
rust: patch bilge-impl to allow compilation with 1.63.0
rust/pl011: Use correct masks for IBRD and FBRD
rust/pl011: remove commented out C code
rust/pl011: add TYPE_PL011_LUMINARY device
rust/pl011: move CLK_NAME static to function scope
rust/pl011: add support for migration
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because Ubuntu 22.04 has a very old version of bindgen, that
does not have the important option --allowlist-file, it will
not be able to use --enable-rust out of the box. Instead,
install the latest version of bindgen-cli via "cargo install"
in the container, following QEMU's own documentation.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cope with the old version that is provided in Debian 12.
--size_t-is-usize is needed on bindgen <0.61.0, and it was removed in
bindgen 0.65.0, so check for it in meson.build.
--merge-extern-blocks was added in 0.61.0.
--formatter rustfmt was added in 0.65.0 and is the default, so remove it.
Apart from Debian 12 and Ubuntu 22.04, all other supported distros have
version 0.66.x of bindgen or newer (or do not have bindgen at all).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These patches have been in my queue pending too long (I have a bunch of others
that haven't been reviewd, but those will be done clsoe to the end of the
release to not get in the way of the release).
The patches align the stack properly on x86_64, implements setting the tb-size
and properly setting the ts_tid for initial threads. They have all been
reviewed.
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=8H2C
-----END PGP SIGNATURE-----
Merge tag 'bsd-user-2024q4-pull-request' of gitlab.com:bsdimp/qemu into staging
bsd-user: Minor fixes
These patches have been in my queue pending too long (I have a bunch of others
that haven't been reviewd, but those will be done clsoe to the end of the
release to not get in the way of the release).
The patches align the stack properly on x86_64, implements setting the tb-size
and properly setting the ts_tid for initial threads. They have all been
reviewed.
# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmcpkl0ACgkQbBzRKH2w
# EQADmRAAl301TtPNsGmrjq74qHgFWPNHc4SSQlK8oIIBgM2Mco/sva5N8ZsCIo4K
# G6uHRbDn3AXUzi7N72ZRKFxQMDQfthtQDskGvsg3zD96pYXkWF6dB3FwSs0Kg0QW
# ow3jj7qiP8NWlbAnMq4fXdtkLGD7S1Og606BYUvk13ILHLY6kwvSWJv53Cq+lDXg
# IQkHGWckG5Xvn/OY3KoLbw77APBCn/fbH6e2yAnBgS8STzEPf2I8xWEiwP6gMpc/
# /BdWkEmqJn5hM//Nf+Yz0uTVMh7egwP8+NjTqYMzWCU3kV0Gtk1cTvpJX3wyzZvZ
# exLOMjL4C+BClA7EJtBvsRrnvv+8ytxn7F3VCeqFR5nAZiU4L3+WfpSjVe8oYCAw
# DL8LYKQA0Abwt6F8EPHwxPxO7HWAKJ4Wxrwlz66juA8gOyuRp+ueVH11ztds6yeh
# rWEgwdXMBOuBcNCGgkuTOajFTRK8hmQNcf/okwODMa5Gj2ayyNmFTnD/bFPe7CbA
# GzJERU+Xtz1wFg+c5LRqqrOnDqD3wDXDrcOuHRhdRWbAl0rLCdH1CLORXZ3XTuF4
# m9JxmaRiCs++a5XswRrSzxb6BM6hKmKX3baGZUeVW6lKyGyyqvY+uUVKkv4U8KqP
# jLPPHE4dicl0/1QbGHZY52gkLYRFXdKa/xKhc8NHXtaWSFACzmo=
# =8H2C
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 05 Nov 2024 03:34:53 GMT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag 'bsd-user-2024q4-pull-request' of gitlab.com:bsdimp/qemu:
bsd-user: Set TaskState ts_tid for initial threads
bsd-user/main: Allow setting tb-size
bsd-user/x86_64/target_arch_thread.h: Align stack
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduced in 0c54acb824, "hw/riscv: add RISC-V IOMMU base emulation".
../hw/riscv/riscv-iommu.c:187:17: error: redefinition of '_pext_u64'
187 | static uint64_t _pext_u64(uint64_t val, uint64_t ext)
| ^
D:/a/_temp/msys64/clang64/lib/clang/18/include/bmi2intrin.h:217:1: note: previous definition is here
217 | _pext_u64(unsigned long long __X, unsigned long long __Y)
| ^
After a conversation on the mailing list, it was decided to rename and
add a comment for this function.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241104222225.1523751-1-pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The naming of the TypeInfo array is inspired by hcd-ohci-sysbus.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-25-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-24-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-22-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-21-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-19-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-18-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-17-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Instead of defining redundant constants and using magic numbers reuse the
existing MII constants.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241103133412.73536-16-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-15-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Prefer a macro rather than a string literal when instantiaging device models.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-14-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Populate this read-only register with some arbitrary values which avoids
U-Boot's get_clocks() to hang().
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-11-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When compiling a decompiled device tree blob created with dumpdtb, dtc complains
with:
/soc@e0000000/i2c@3000: incorrect #address-cells for I2C bus
/soc@e0000000/i2c@3000: incorrect #size-cells for I2C bus
Fix this by adding the missing device tree properties.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, we have no way to expose the arch-specific default cache
model because the cache model is sometimes related to the CPU model
(e.g., i386).
Since the user might configure "default" level, any comparison with
"default" is meaningless before the machine knows the specific level
that "default" refers to.
We can only check the correctness of the cache topology after the arch
loads the user-configured cache model from MachineState.smp_cache and
consumes the special "default" level by replacing it with the specific
level.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-6-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add cache_supported flags in SMPCompatProps to allow machines to
configure various caches support.
And check the compatibility of the cache properties with the
machine support in machine_parse_smp_cache().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-5-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The x86 and ARM need to allow user to configure cache properties
(current only topology):
* For x86, the default cache topology model (of max/host CPU) does not
always match the Host's real physical cache topology. Performance can
increase when the configured virtual topology is closer to the
physical topology than a default topology would be.
* For ARM, QEMU can't get the cache topology information from the CPU
registers, then user configuration is necessary. Additionally, the
cache information is also needed for MPAM emulation (for TCG) to
build the right PPTT.
Define smp-cache related enumeration and properties in QAPI, so that
user could configure cache properties for SMP system through -machine in
the subsequent patch.
Cache enumeration (CacheLevelAndType) is implemented as the combination
of cache level (level 1/2/3) and cache type (data/instruction/unified).
Currently, separated L1 cache (L1 data cache and L1 instruction cache)
with unified higher-level cache (e.g., unified L2 and L3 caches), is the
most common cache architectures.
Therefore, enumerate the L1 D-cache, L1 I-cache, L2 cache and L3 cache
with smp-cache object to add the basic cache topology support. Other
kinds of caches (e.g., L1 unified or L2/L3 separated caches) can be
added directly into CacheLevelAndType if necessary.
Cache properties (SmpCacheProperties) currently only contains cache
topology information, and other cache properties can be added in it
if necessary.
Note, define cache topology based on CPU topology level with two
reasons:
1. In practice, a cache will always be bound to the CPU container
(either private in the CPU container or shared among multiple
containers), and CPU container is often expressed in terms of CPU
topology level.
2. The x86's cache-related CPUIDs encode cache topology based on APIC
ID's CPU topology layout. And the ACPI PPTT table that ARM/RISCV
relies on also requires CPU containers to help indicate the private
shared hierarchy of the cache. Therefore, for SMP systems, it is
natural to use the CPU topology hierarchy directly in QEMU to define
the cache topology.
With smp-cache QAPI support, add smp cache topology for machine by
parsing the smp-cache object list.
Also add the helper to access/update cache topology level of machine.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-4-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cache topology needs to be defined based on CPU topology levels. Thus,
define CPU topology enumeration in qapi/machine.json to make it generic
for all architectures.
To match the general topology naming style, rename CPU_TOPO_LEVEL_* to
CPU_TOPOLOGY_LEVEL_*, and rename SMT and package levels to thread and
socket.
Also, enumerate additional topology levels for non-i386 arches, and add
a CPU_TOPOLOGY_LEVEL_DEFAULT to help future smp-cache object to work
with compatibility requirement of arch-specific cache topology models.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241101083331.340178-3-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the follow-up change, the CPU topology enumeration will be moved to
QAPI. And considerring "invalid" should not be exposed to QAPI as an
unsettable item, so, as a preparation for future changes, remove
"invalid" level from the current CPU topology enumeration structure
and define it by a macro instead.
Due to the removal of the enumeration of "invalid", bit 0 of
CPUX86State.avail_cpu_topo bitmap will no longer correspond to "invalid"
level, but will start at the SMT level. Therefore, to honor this change,
update the encoding rule for CPUID[0x1F].
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-2-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Include the missing "qemu/units.h" to fix when refactoring code:
../hw/core/machine.c:743:34: error: use of undeclared identifier 'MiB'
743 | mc->default_ram_size = 128 * MiB;
| ^
../hw/core/machine.c:750:44: error: use of undeclared identifier 'TiB'
750 | mc->smbios_memory_device_size = 2047 * TiB;
| ^
and "qemu/error-report.h" to fix:
../hw/core/machine.c:1029:13: error: call to undeclared function 'error_report' [-Wimplicit-function-declaration]
1029 | error_report("NUMA node %" PRIu16 " is missing, use "
| ^
../hw/core/machine.c:1240:9: error: call to undeclared function 'warn_report' [-Wimplicit-function-declaration]
1240 | warn_report("CPU model %s is deprecated -- %s",
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240930221900.59525-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replace DEFINE_MACHINE() by DEFINE_TYPES(), converting the
class_init() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-6-philmd@linaro.org>
The machine datasheet mentions the GPIO device as 'xps_gpio'.
Rename it accordingly to easily find its documentation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-5-philmd@linaro.org>
By default the machine's CPU endianness is 'big' order
('little-endian' property set to %false).
This corresponds to the default when this machine was added;
see commits 6a8b1ae202 "microblaze: Add petalogix s3a1800dsp
MMU linux ref-design." and 72b675caac "microblaze: Hook into
the build-system." which added:
[ "$target_cpu" = "microblaze" ] && target_bigendian=yes
Later commit 877fdc12b1 ("microblaze: Allow targeting
little-endian mb") added little-endian support, forgetting
to set the CPU endianness to little-endian. Not an issue
since this property was never used, but we will use it soon,
so explicit the endianness to get the expected behavior.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-4-philmd@linaro.org>
The petalogix-ml605 machine was explicitly added as little-endian only
machine in commit 00914b7d97 ("microblaze: Add PetaLogix ml605 MMU
little-endian ref design"). Mark the big-endian version as deprecated.
When the xlnx-zynqmp-pmu machine's CPU was added in commit 133d23b3ad
("xlnx-zynqmp-pmu: Add the CPU and memory"), its 'endianness' property
was set to %true, thus wired in little endianness.
Both machine are included in the big-endian system binary, while their
CPU is working in little-endian. Unlikely to work as it. Deprecate now
as broken config so we can remove soon.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241105130431.22564-3-philmd@linaro.org>
Alias the 'endian' property as 'little-endian' because the 'ENDI'
bit is set when the endianness is in little order, and unset in
big order.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20241105130431.22564-2-philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <3f61b85c-9382-4520-a1ce-5476eb16fb56@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
gcrypto has the ability to dynamically disable hash/hmac algorithms
at runtime, so QEMU must perform a runtime check.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Gcrypt does not return negative values on error, it returns non-zero
values. This caused QEMU not to detect failure to open an unsupported
hash, resulting in a later crash trying to use a NULL context.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
