Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230524082037.1620952-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230523110435.1375774-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit b320e21c48,
which accidentally broke TCG, because it made the TCG -cpu max
report the presence of MTE to the guest even if the board hadn't
enabled MTE by wiring up the tag RAM. This meant that if the guest
then tried to use MTE QEMU would segfault accessing the
non-existent tag RAM:
==346473==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address (pc 0x55f328952a4a bp 0x00000213a400 sp 0x7f7871859b80 T346476)
==346473==The signal is caused by a READ memory access.
==346473==Hint: this fault was caused by a dereference of a high value address (see register values below). Disassemble the provided pc to learn which register was used.
#0 0x55f328952a4a in address_space_to_flatview /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:1108:12
#1 0x55f328952a4a in address_space_translate /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:2797:31
#2 0x55f328952a4a in allocation_tag_mem /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:176:10
#3 0x55f32895366c in helper_stgm /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:461:15
#4 0x7f782431a293 (<unknown module>)
It's also not clear that the KVM logic is correct either:
MTE defaults to on there, rather than being only on if the
board wants it on.
Revert the whole commit for now so we can sort out the issues.
(We didn't catch this in CI because we have no test cases in
avocado that use guests with MTE support.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230519145808.348701-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the vexpress board code, we allocate a new MemoryRegion at the top
of vexpress_common_init() but only set it up and use it inside the
"if (map[VE_NORFLASHALIAS] != -1)" conditional, so we leak it if not.
This isn't a very interesting leak as it's a tiny amount of memory
once at startup, but it's easy to fix.
We could silence Coverity simply by moving the g_new() into the
if() block, but this use of g_new(MemoryRegion, 1) is a legacy from
when this board model was originally written; we wouldn't do that
if we wrote it today. The MemoryRegions are conceptually a part of
the board and must not go away until the whole board is done with
(at the end of the simulation), so they belong in its state struct.
This machine already has a VexpressMachineState struct that extends
MachineState, so statically put the MemoryRegions in there instead of
dynamically allocating them separately at runtime.
Spotted by Coverity (CID 1509083).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230512170223.3801643-3-peter.maydell@linaro.org
Bochs card is normal PCI Express card so it fits better in system with
PCI Express bus. VGA is simple legacy PCI card.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230505120936.1097060-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the 'mte' property for the virt machine to cover KVM as
well. For KVM, we don't allocate tag memory, but instead enable the
capability.
If MTE has been enabled, we need to disable migration, as we do not
yet have a way to migrate the tags as well. Therefore, MTE will stay
off with KVM unless requested explicitly.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230428095533.21747-2-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The world outside moves to newer and newer cpu cores. Let move SBSA
Reference Platform to something newer as well.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230506183417.1360427-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX_VERSAL" at usb/Kconfig because building --without-default-devices
disables the default selection resulting in:
$ ./qemu-system-aarch64 -M xlnx-zcu102
qemu-system-aarch64: missing object type 'usb_dwc3'
Aborted (core dumped)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230208192654.8854-8-farosas@suse.de>
Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When writing the secondary-CPU stub boot loader code to the guest,
use arm_write_bootloader() instead of directly calling
rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because
arm_write_bootloader() will correctly byte-swap the host-byte-order
array values into the guest-byte-order to write into the guest
memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424152717.1333930-4-peter.maydell@linaro.org
When writing the secondary-CPU stub boot loader code to the guest,
use arm_write_bootloader() instead of directly calling
rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because
arm_write_bootloader() will correctly byte-swap the host-byte-order
array values into the guest-byte-order to write into the guest
memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-3-peter.maydell@linaro.org
[PMM: Moved the "make arm_write_bootloader() function public" part
to its own patch; updated commit message to note that this fixes
an actual bug; adjust to the API changes noted in previous commit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm boot.c code includes a utility function write_bootloader()
which assists in writing a boot-code fragment into guest memory,
including handling endianness and fixing it up with entry point
addresses and similar things. This is useful not just for the boot.c
code but also in board model code, so rename it to
arm_write_bootloader() and make it globally visible.
Since we are making it public, make its API a little neater: move the
AddressSpace* argument to be next to the hwaddr argument, and allow
the fixupcontext array to be const, since we never modify it in this
function.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-2-peter.maydell@linaro.org
[PMM: Split out from another patch by Cédric, added doc comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This query copies the kernel command line into the message buffer. It
was previously stubbed out to return empty, this commit makes it reflect
the arguments specified with `-append`.
I observed the following peculiarities on my Pi 3B+:
- If the buffer is shorter than the string, the response header gives
the full length, but no data is actually copied.
- No NUL terminator is added: even if the buffer is long enough to fit
one, the buffer's original contents are preserved past the string's
end.
- The VC firmware adds the following extra parameters beside the
user-supplied ones (via /boot/cmdline.txt): `video`, `vc_mem.mem_base`
and `vc_mem.mem_size`. This is currently not implemented in qemu.
Signed-off-by: Daniel Bertalan <dani@danielbertalan.dev>
Message-id: 20230425103250.56653-1-dani@danielbertalan.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about NUL and short-buffer behaviour]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all the CONFIG_FOO=y from default.mak into "default y if TCG"
statements in Kconfig. That way they won't be selected when
CONFIG_TCG=n.
I'm leaving CONFIG_ARM_VIRT in default.mak because it allows us to
keep the two default.mak files not empty and keep aarch64-default.mak
including arm-default.mak. That way we don't surprise anyone that's
used to altering these files.
With this change we can start building with --disable-tcg.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-12-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING
and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in
default.mak anymore. So reflect the change in a Kconfig.
Instead of using semihosting/Kconfig, use a target-specific file, so
that the change doesn't affect other architectures which might
implement semihosting in a way compatible with KVM.
The selection from ARM_v7M needs to be removed to avoid a cycle during
parsing.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-11-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
move the module containing cpu models definitions
for 32bit TCG-only CPUs to tcg/ and rename it for clarity.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-8-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the 64-bit CPUs that are TCG-only:
- cortex-a35
- cortex-a55
- cortex-a72
- cortex-a76
- a64fx
- neoverse-n1
Keep the CPUs that can be used with KVM:
- cortex-a57
- cortex-a53
- max
- host
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-6-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
=ML27
-----END PGP SIGNATURE-----
Merge tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm into staging
Merge tpm 2023/04/20 v1
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
# QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
# crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
# t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
# GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
# e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
# 1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
# =ML27
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm:
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
tests/avocado/aspeed: Add TPM TIS I2C test
tpm: Add support for TPM device over I2C bus
tpm: Extend common APIs to support TPM TIS I2C
docs: Add support for TPM devices over I2C bus
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
+SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
dwQ9LRDFNsA=
=8ZFL
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu into staging
* Compat machines for version 8.1
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
# doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
# 4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
# dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
# UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
# R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
# dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
# dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
# gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
# 0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
# +SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
# dwQ9LRDFNsA=
# =8ZFL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:07:15 AM BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu: (23 commits)
tests/vm/freebsd: Update to FreeBSD 13.2
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
MAINTAINERS: Add Juan Quintela to developer guides review
cpu: Remove parameter of list_cpus()
hw/core: Move numa.c into the target independent source set
softmmu: Move dirtylimit.c into the target independent source set
hw/display: Compile vga.c as target-independent code
softmmu: Make qtest.c target independent
include/exec: Provide the tswap() functions for target independent code, too
softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c
hw/char: Move two more files from specific_ss to softmmu_ss
target/i386: Set family/model/stepping of the "max" CPU according to LM bit
tests/migration: Only run auto_converge in slow mode
travis.yml: Add missing 'flex', 'bison' packages to 'GCC (user)' job
travis.yml: Add missing clang-10 package to the 'Clang (disable-tcg)' job
chardev: Allow setting file chardev input file on the command line
qtest: Don't assert on "-qtest chardev:myid"
test: Fix test-crypto-secret when compiling without keyring support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 protocol.
This commit includes changes for the common code.
- Added I2C emulation model. Logic was added in the model to temporarily
cache the data as I2C interface works per byte basis.
- New tpm type "tpm-tis-i2c" added for I2C support. The user has to
provide this string on command line.
Testing:
TPM I2C device module is tested using SWTPM (software based TPM
package). Qemu uses the rainier machine and is connected to swtpm over
the socket interface.
The command to start swtpm is as follows:
$ swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--tpm2 --log level=100
The command to start qemu is as follows:
$ qemu-system-arm -M rainier-bmc -nographic \
-kernel ${IMAGEPATH}/fitImage-linux.bin \
-dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \
-initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \
-drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \
-net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \
-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-4-ninadpalsule@us.ibm.com
On mcimx7d-sabre, the MDIO bus is connected to the first Ethernet
interface. Set fec2-phy-connected to false to reflect this.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-6-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-5-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On mcimx6ul-evk, the MDIO bus is connected to the second Ethernet
interface. Set fec1-phy-connected to false to reflect this.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-4-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-3-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cortex-A7 core is only available when TCG is enabled (see
commit 80485d88f9 "target/arm: Restrict v7A TCG cpus to TCG accel").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230405100848.76145-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds WDT to Allwinner-H3 and Orangepi-PC.
WDT is added as an overlay to the Timer module memory area.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-4-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds WDT to Allwinner-A10 and Cubieboard.
WDT is added as an overlay to the Timer module memory map.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-3-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230409200526.1156456-1-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At this moment, arm_load_dtb() can free machine->fdt when
binfo->dtb_filename is NULL. If there's no 'dtb_filename', 'fdt' will be
retrieved by binfo->get_dtb(). If get_dtb() returns machine->fdt, as is
the case of machvirt_dtb() from hw/arm/virt.c, fdt now has a pointer to
machine->fdt. And, in that case, the existing g_free(fdt) at the end of
arm_load_dtb() will make machine->fdt point to an invalid memory region.
Since monitor command 'dumpdtb' was introduced a couple of releases
ago, running it with any ARM machine that uses arm_load_dtb() will
crash QEMU.
Let's enable all arm_load_dtb() callers to use dumpdtb properly. Instead
of freeing 'fdt', assign it back to ms->fdt.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Fixes: bf353ad555 ("qmp/hmp, device_tree.c: introduce dumpdtb")
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20230328165935.1512846-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
* Small adjustments for the newest Meta machines
* blk_pread_nonzeroes() fix required for pflash and m25p80 devices
* Improve error reporting on file size for m25p80 devices
-----BEGIN PGP SIGNATURE-----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=Xs26
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu into staging
aspeed queue:
* Small adjustments for the newest Meta machines
* blk_pread_nonzeroes() fix required for pflash and m25p80 devices
* Improve error reporting on file size for m25p80 devices
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQHXi8ACgkQUaNDx8/7
# 7KHB7w//SQzcTNAUgMc6zbe3bULS9YU7csg0zX896DwQ9Ub4wtbnIps0/JwOsx6E
# ss52YbbRVlHKcbahX6WW8JHtc6Wepcmnp4vC5dXdqgRryLTK5GgBu/GKcBb6qnHZ
# uXwJpf7IwygOXQFg9Wy4zl3ipmrjgzMy6ZEbc3oqQUto+8E7HVMJiMXnrT5Y0yLt
# Y76PywBxkYWcd522lWAXziXFxHaEJGMGrDCI/op4TuNAk0QLSRHp+x851JBF0Uyx
# Lkp1cEjgADoH1FUfvo7aCNtAWGP4IFDprEupI3idPqjZ8KnnwPk2cnBMGeKJ5lWQ
# XfSTwG5B3hYwGM0uYwHzHXUsq5/JGa0iDhSvjZVD8rf/w9BTek/GjypbJpL2XW6b
# 4QaGGKGFWWMHbAaNVP6oEGqmkoC3QRKoQuaP6epaFyuSjNRWXkOhf5S5V10akjSc
# xis0Z8gIpyLrtFT2TFc5BN9+z+PLgyaYyh7wZ2pFy1i6SOgh4FIFBOzQJDb05mmf
# aFMD+6FOGx0wo8OXfy5EQyElWhVSYio+Hx9DaDP3d3cd/twHJx8nZ8QlXh2ThRd8
# jNLdFReJBImCJHSmYzbc/tGDOjg6+TWkZOzdjqTra08UwisK4XyOKj8E+sodWr0y
# e/hI9nmIoarLCytMN1zElQFvj8xjpZ2lZOxr2EiX5ugYg0iuJhU=
# =Xs26
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 15:54:23 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu:
hw/arm/aspeed: Modified BMC FRU byte data in yosemitev2
hw/arm/aspeed: Added TMP421 type sensor's support in tiogapass
hw/arm/aspeed: Added TMP421 type sensor's support in yosemitev2
pflash: Fix blk_pread_nonzeroes()
m25p80: Improve error when the backend file size does not match the device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modified BMC FRU data in yosemite v2 platform.
Tested: Tested and Verified in yosemitev2 platform.
Fixes: 34f73a81e6 ("hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU")
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230307104833.3587947-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Added TMP421 type sensor support in tiogapass platform.
Tested: Tested and verified in tiogapass platform.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230307103334.3586755-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Added TMP421 type support in yosemite v2 platform.
Tested: Tested and verified in yosemite V2 platform.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230307095239.3583613-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Allwinner h3 has 4 twi(i2c) devices named twi0, twi1, twi2 and r_twi.
The registers are compatible with TYPE_AW_I2C_SUN6I, write 1 to clear
control register's INT_FLAG bit.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fedora 39 will ship its arm64 kernels in the new generic EFI zboot
format, using gzip compression for the payload.
For doing EFI boot in QEMU, this is completely transparent, as the
firmware or bootloader will take care of this. However, for direct
kernel boot without firmware, we will lose the ability to boot such
distro kernels unless we deal with the new format directly.
EFI zboot images contain metadata in the header regarding the placement
of the compressed payload inside the image, and the type of compression
used. This means we can wire up the existing gzip support without too
much hassle, by parsing the header and grabbing the payload from inside
the loaded zboot image.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20230303160109.3626966-1-ardb@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked comment formatting, fixed checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
-----BEGIN PGP SIGNATURE-----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=ExnJ
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu into staging
aspeed queue:
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQAnrQACgkQUaNDx8/7
# 7KGIvQ//Te2eSxlZNxAXHb3HSVFRaBW+2EkJzNlalX75olFSzCLe8BnAHK5xPlYv
# JjU0aPjWaPohPLdbNbAsJY2B8AwMGbUTjSv+ORRWF6s97LTVD9WcAYHgOTCz6d2X
# ZrArJ5msEQAFEySOLmBqTcuyW3t4w8XeII+B09HZIS8Gn3F9kX5+4JCw9E4sX8fS
# n9ayclMmrXCPbkGA4bfwJp3KI1Tc/WXNRyG0AmPEmepid7ECr5tVvQoXRMF1Sy/D
# 10qbHEcmQXvZDy85M2ED1niOac4oU+EY8Wvjzkgc36uXcjqf0jIUfw56cwGSNVkW
# MhPXSMiH4tEjgxmtzld3LeA6TGfrFcCvRXYiCuYWHjBS3gptlqY6Q0580vxoQVXL
# lTYui57LB1YStNLcLG9toP0d4/fRfeqEx7ddCQKlopnW/K392eoJo0aYoVGVJhIC
# 3QhN525EFUwMm4FDpdSW29Gfbk/ytpf0u4hQ6JPeBl8psirRKqCGuwr5NOnPYTaN
# yErlsq2eL83t9kLo+2YIqgWic85wNP3kqAjIaE6lminqX7sWFH3V1g9HqUQZVG1g
# msatZMiCCvwSFuz3DPkSfnuhqwaHuhvCATZloCtguCmnbUK9qUVVzvodKw62sZrd
# GdS2XvRNyoOwezz0tDEvPipyZ7RpcaatryHNuzGwRsE5Lvr73dg=
# =ExnJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Mar 2023 13:03:48 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu:
aspeed/smc: Replace SysBus IRQs with GPIO lines
aspeed: Add a boot_rom overlap region in the SoC spi_boot container
aspeed: Introduce a spi_boot region under the SoC
aspeed/fuji : correct the eeprom size
hw/at24c : modify at24c to support 1 byte address mode
hw/arm/aspeed: Adding new machine Tiogapass in QEMU
hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU
tests/avocado/machine_aspeed.py: Add an I2C slave test
hw/misc: add a toy i2c echo device
hw/i2c: only schedule pending master when bus is idle
readline: fix hmp completion issue
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230223065924.42503-5-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's cleaner and removes the curious '+ 1' required to skip the DMA
IRQ line of the controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
To avoid the SPI transactions fetching instructions from the FMC CE0
flash device and speed up boot, a ROM can be created if a drive is
available.
Reverse the logic to allow a machine to boot without a drive, using a
block device instead :
-blockdev node-name=fmc0,driver=file,filename=/path/to/flash.img \
-device mx66u51235f,bus=ssi.0,drive=fmc0
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The default boot address of the Aspeed SoCs is 0x0. For this reason,
the FMC flash device contents are remapped by HW on the first 256MB of
the address space. In QEMU, this is currently done in the machine init
with the setup of a region alias.
Move this code to the SoC and introduce an extra container to prepare
ground for the boot ROM region which will overlap the FMC flash
remapping.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch support Tiogapass in QEMU environment.
and introduced EEPROM BMC FRU data support "add tiogapass_bmc_fruid data"
along with the machine support.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - commit log topic update
- checkpatch issues
- Documentation update ]
Message-Id: <20230216184342.253868-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch support Yosemitev2 in QEMU environment.
and introduced EEPROM BMC FRU data support "add fbyv2_bmc_fruid data"
along with the machine support.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - commit log topic update
- Documentation update ]
Message-Id: <20230216133326.216017-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ide_create_drive() operates on a IDEBus; rename it as
ide_bus_create_drive() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/ide_create_drive/ide_bus_create_drive/g' \
$(git grep -wl ide_create_drive)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-12-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, and QEMU style is to use Camel
Case, so rename qemu_or_irq as OrIRQState.
Mechanical change using:
$ sed -i -e 's/qemu_or_irq/OrIRQState/g' $(git grep -l qemu_or_irq)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cmsdk_apb_uart_create() is only used twice in the same
file. Open-code it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230220115114.25237-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pl011_luminary_create() is only used for the Stellaris board,
open-code it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is in preparation to moving the hflags code into its own file
under the tcg/ directory.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pci_device.h is not needed at all in allwinner-a10.h, and serial.h
is only needed by the corresponding .c file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230215152233.210024-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a
KVM-only build the 'max' cpu.
Note that we cannot use 'host' here because the qtests can run without
any other accelerator (than qtest) and 'host' depends on KVM being
enabled.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Addresses targeting the second translation table (TTB1) in the SMMU have
all upper bits set (except for the top byte when TBI is enabled). Fix
the TTB1 check.
Reported-by: Ola Hugosson <ola.hugosson@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Addresses targeting the second translation table (TTB1) in the SMMU have
all upper bits set. Ensure the IOMMU region covers all 64 bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just use current_accel_name() directly.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit acc0b8b05a when running the ZynqMP ZCU102 board with
a QEMU configured using --without-default-devices, we get:
$ qemu-system-aarch64 -M xlnx-zcu102
qemu-system-aarch64: missing object type 'usb_dwc3'
Abort trap: 6
Fix by adding the missing Kconfig dependency.
Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230216092327.2203-1-philmd@linaro.org
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GBPA register can be used to globally abort all
transactions.
It is described in the SMMU manual in "6.3.14 SMMU_GBPA".
ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to
be zero(Do not abort incoming transactions).
Other fields have default values of Use Incoming.
If UPDATE is not set, the write is ignored. This is the only permitted
behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure)
As this patch adds a new state to the SMMU (GBPA), it is added
in a new subsection for forward migration compatibility.
GBPA is only migrated if its value is different from the reset value.
It does this to be backward migration compatible if SW didn't write
the register.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230214094009.2445653-1-smostafa@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tracked down with the help of scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
This SoC uses a Cortex-M4F. QEMU only implements a M4,
which is good enough. Add a TODO note in case the M4F
is added.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some SRAM appears to be used by the Secure Boot unit and
crypto accelerators. Name it 'secure sram'.
Note, the SRAM base address was already present but unused
(the 'SBC' index is used for the MMIO peripheral).
Interestingly using CFLAGS=-Winitializer-overrides reports:
../hw/arm/aspeed_ast10x0.c:32:30: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
[ASPEED_DEV_SBC] = 0x7E6F2000,
^~~~~~~~~~
../hw/arm/aspeed_ast10x0.c:24:30: note: previous initialization is here
[ASPEED_DEV_SBC] = 0x79000000,
^~~~~~~~~~
This fixes with Zephyr:
uart:~$ rsa test
rsa test vector[0]:
[00:00:26.156,000] <err> os: ***** BUS FAULT *****
[00:00:26.157,000] <err> os: Precise data bus error
[00:00:26.157,000] <err> os: BFAR Address: 0x79000000
[00:00:26.158,000] <err> os: r0/a1: 0x79000000 r1/a2: 0x00000000 r2/a3: 0x00001800
[00:00:26.158,000] <err> os: r3/a4: 0x79001800 r12/ip: 0x00000800 r14/lr: 0x0001098d
[00:00:26.158,000] <err> os: xpsr: 0x81000000
[00:00:26.158,000] <err> os: Faulting instruction address (r15/pc): 0x0001e1bc
[00:00:26.158,000] <err> os: >>> ZEPHYR FATAL ERROR 0: CPU exception on CPU 0
[00:00:26.158,000] <err> os: Current thread: 0x38248 (shell_uart)
[00:00:26.165,000] <err> os: Halting system
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
[ clg: Fixed size of Secure Boot Controller Memory ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since I don't have access to the datasheet, the relevant
values were found in:
https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Avoid confusing two different things:
- the WDT I/O region size ('iosize')
- at which offset the SoC map the WDT ('offset')
While it is often the same, we can map smaller region sizes
at larger offsets.
Here we are interested in the I/O region size, so rename as
'iosize'.
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[ clg: Introduced temporary wdt_offset variable ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- Create aspeed_eeprom.c and aspeed_eeprom.h
- Include aspeed_eeprom.c in CONFIG_ASPEED meson source files
- Include aspeed_eeprom.h in aspeed.c
- Add fby35_bmc_fruid data
- Use new at24c_eeprom_init_rom helper to initialize BMC FRUID EEPROM with data
from aspeed_eeprom.c
wget https://github.com/facebook/openbmc/releases/download/openbmc-e2294ff5d31d/fby35.mtd
qemu-system-aarch64 -machine fby35-bmc -nographic -mtdblock fby35.mtd
...
user: root
pass: 0penBmc
...
root@bmc-oob:~# fruid-util bb
FRU Information : Baseboard
--------------- : ------------------
Chassis Type : Rack Mount Chassis
Chassis Part Number : N/A
Chassis Serial Number : N/A
Board Mfg Date : Fri Jan 7 10:30:00 2022
Board Mfg : XXXXXX
Board Product : Management Board wBMC
Board Serial : XXXXXXXXXXXXX
Board Part Number : XXXXXXXXXXXXXX
Board FRU ID : 1.0
Board Custom Data 1 : XXXXXXXXX
Board Custom Data 2 : XXXXXXXXXXXXXXXXXX
Product Manufacturer : XXXXXX
Product Name : Yosemite V3.5 EVT2
Product Part Number : XXXXXXXXXXXXXX
Product Version : EVT2
Product Serial : XXXXXXXXXXXXX
Product Asset Tag : XXXXXXX
Product FRU ID : 1.0
Product Custom Data 1 : XXXXXXXXX
Product Custom Data 2 : N/A
root@bmc-oob:~# fruid-util bmc
FRU Information : BMC
--------------- : ------------------
Board Mfg Date : Mon Jan 10 21:42:00 2022
Board Mfg : XXXXXX
Board Product : BMC Storage Module
Board Serial : XXXXXXXXXXXXX
Board Part Number : XXXXXXXXXXXXXX
Board FRU ID : 1.0
Board Custom Data 1 : XXXXXXXXX
Board Custom Data 2 : XXXXXXXXXXXXXXXXXX
Product Manufacturer : XXXXXX
Product Name : Yosemite V3.5 EVT2
Product Part Number : XXXXXXXXXXXXXX
Product Version : EVT2
Product Serial : XXXXXXXXXXXXX
Product Asset Tag : XXXXXXX
Product FRU ID : 1.0
Product Custom Data 1 : XXXXXXXXX
Product Custom Data 2 : Config A
root@bmc-oob:~# fruid-util nic
FRU Information : NIC
--------------- : ------------------
Board Mfg Date : Tue Nov 2 08:51:00 2021
Board Mfg : XXXXXXXX
Board Product : Mellanox ConnectX-6 DX OCP3.0
Board Serial : XXXXXXXXXXXXXXXXXXXXXXXX
Board Part Number : XXXXXXXXXXXXXXXXXXXXX
Board FRU ID : FRU Ver 0.02
Product Manufacturer : XXXXXXXX
Product Name : Mellanox ConnectX-6 DX OCP3.0
Product Part Number : XXXXXXXXXXXXXXXXXXXXX
Product Version : A9
Product Serial : XXXXXXXXXXXXXXXXXXXXXXXX
Product Custom Data 3 : ConnectX-6 DX
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-5-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
aspeed_eeprom_init is an exact copy of at24c_eeprom_init, not needed.
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-3-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This helper is useful in board initialization because lets users initialize and
realize an EEPROM on an I2C bus with a single function call.
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-2-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
supermicrox11-bmc is configured with ast2400-a1 SoC. This does not match
the Supermicro documentation for X11 BMCs, and it does not match the
devicetree file in the Linux kernel.
As it turns out, some Supermicro X11 motherboards use AST2400 SoCs,
while others use AST2500.
Introduce new machine type supermicrox11-spi-bmc with AST2500 SoC
to match the devicetree description in the Linux kernel. Hardware
configuration details for this machine type are guesswork and taken
from defaults as well as from the Linux kernel devicetree file.
The new machine type was tested with aspeed-bmc-supermicro-x11spi.dts
from the Linux kernel and with Linux versions 6.0.3 and 6.1-rc2.
Linux booted successfully from initrd and from both SPI interfaces.
Ethernet interfaces were confirmed to be operational.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20221025165109.1226001-1-linux@roeck-us.net
[ clg: Renamed machine to 'supermicro-x11spi-bmc' ]
Message-Id: <20221025165109.1226001-1-linux@roeck-us.net>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The M2S-FG484 SOM uses a 16 MiB SPI flash (Spansion
S25FL128SDPBHICO). Since the test asset is bigger,
truncate it to the correct size to avoid when running
the test_arm_emcraft_sf2 test:
qemu-system-arm: device requires 16777216 bytes, block backend provides 67108864 bytes
Add comment regarding the M2S-FG484 SOM hardware in
hw/arm/msf2-som.c.
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cortex-A76 supports 40bits of address space. sbsa-ref's memory
starts above this limit.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230126114416.2447685-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's explicitly list out all accelerators that we support when trying to
determine the supported set of GIC versions. KVM was already separate, so
the only missing one is HVF which simply reuses all of TCG's emulation
code and thus has the same compatibility matrix.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221223090107.98888-3-agraf@csgraf.de
[PMM: Added qtest to the list of accelerators]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Up to now, the finalize_gic_version() code open coded what is essentially
a support bitmap match between host/emulation environment and desired
target GIC type.
This open coding leads to undesirable side effects. For example, a VM with
KVM and -smp 10 will automatically choose GICv3 while the same command
line with TCG will stay on GICv2 and fail the launch.
This patch combines the TCG and KVM matching code paths by making
everything a 2 pass process. First, we determine which GIC versions the
current environment is able to support, then we go through a single
state machine to determine which target GIC mode that means for us.
After this patch, the only user noticable changes should be consolidated
error messages as well as TCG -M virt supporting -smp > 8 automatically.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20221223090107.98888-2-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the macro instead of two explicit string literals.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230124232059.4017615-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the proper QOM type definition instead of magic string.
This also helps during eventual refactor while using git-grep.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230117193014.83502-1-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230110082508.24038-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define TYPE_GPIO_I2C in the public "hw/i2c/bitbang_i2c.h"
header and use it in hw/arm/musicpal.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20230111085016.44551-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
arm_ss[] units are built twice: once for 32-bit word size and
once for 64-bit. The following units don't require any word
size knowledge and can be moved to softmmu_ss[] (where they
are built once):
- smmu-common.c
- exynos4_boards.c
- bcm2835_peripherals.c
- tosa.c
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110164406.94366-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The typedef and definitions are generated by the OBJECT_DECLARE_TYPE
macro in "hw/arm/bcm2836.h":
20 #define TYPE_BCM283X "bcm283x"
21 OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X)
The script ran in commit a489d1951c ("Use OBJECT_DECLARE_TYPE when
possible") missed them because they are declared in a different
file unit. Remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following docs/devel/style.rst guidelines, rename
stellaris_adc_state -> StellarisADCState. This also remove a
use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since its QOM'ification in commit 368a354f02 ("pflash_cfi0x:
QOMified") the pflash_cfi01_register() function does not fail.
This call was later converted with a script to use &error_fatal,
still unable to fail. Remove the unreachable code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-14-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Upon introduction in commit b8433303fb ("Set proper device-width
for vexpress flash"), ve_pflash_cfi01_register() was calling
qdev_init_nofail() which can not fail. This call was later
converted with a script to use &error_fatal, still unable to
fail. Remove the unreachable code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-13-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IEC binary prefixes ease code review: the unit is explicit.
Add the FLASH_SECTOR_SIZE definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-12-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IEC binary prefixes ease code review: the unit is explicit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The total_ram_v1/total_ram_v2 definitions were never used.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IEC binary prefixes ease code review: the unit is explicit.
Add the FLASH_SECTOR_SIZE definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IEC binary prefixes ease code review: the unit is explicit.
Add the FLASH_SECTOR_SIZE definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IEC binary prefixes ease code review: the unit is explicit.
Add definitions for RAM / Flash / Flash blocksize.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-7-philmd@linaro.org
Message-Id: <20200223231044.8003-3-philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a comment describing the Connex uses a Numonyx RC28F128J3F75
flash, and the Verdex uses a Micron RC28F256P30TFA.
Correct the Verdex machine description (we model the 'Pro' board).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-6-philmd@linaro.org
Message-Id: <20200223231044.8003-3-philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IEC binary prefixes ease code review: the unit is explicit.
Add definitions for RAM / Flash / Flash blocksize.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since pxa270_init() must map the device in the system memory,
there is no point in passing get_system_memory() by argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since pxa255_init() must map the device in the system memory,
there is no point in passing get_system_memory() by argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch enables copying of SPL from MMC if `-kernel` parameter is not
passed when starting QEMU. SPL is copied to SRAM_A.
The approach is reused from Allwinner H3 implementation.
Tested with Armbian and custom Yocto image.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20221226220303.14420-7-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements Allwinner TWI/I2C controller emulation. Only
master-mode functionality is implemented.
The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is
first part enabling the TWI/I2C bus operation.
Since both Allwinner A10 and H3 use the same module, it is added for
both boards.
Docs are also updated for Cubieboard and Orangepi-PC board to indicate
I2C availability.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During SPL boot several DRAM Controller registers are used. Most
important registers are those related to DRAM initialization and
calibration, where SPL initiates process and waits until certain bit is
set/cleared.
This patch adds these registers, initializes reset values from user's
guide and updates state of registers as SPL expects it.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During SPL boot several Clock Controller Module (CCM) registers are
read, most important are PLL and Tuning, as well as divisor registers.
This patch adds these registers and initializes reset values from user's
guide.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Olimex makes a series of low-cost STM32 boards. This commit introduces
the minimum setup to support SMT32-H405. See [1] for details
[1] https://www.olimex.com/Products/ARM/ST/STM32-H405/
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20221230145733.200496-3-balbi@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
STM32F405 has 128K of SRAM and another 64K of CCM (Core-coupled
Memory) at a different base address. Correctly describe the memory
layout to give existing FW images a chance to run unmodified.
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Message-id: 20221230145733.200496-2-balbi@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IRQs were not associated to the various GPIO devices inside i.MX7D.
This patch brings the i.MX7D on par with i.MX6.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20221226101418.415170-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So far the GPT timers were unable to raise IRQs to the processor.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When using Clang ("Apple clang version 14.0.0 (clang-1400.0.29.202)")
and building with -Wall we get:
hw/arm/smmu-common.c:173:33: warning: static function 'smmu_hash_remove_by_asid_iova' is used in an inline function with external linkage [-Wstatic-in-inline]
hw/arm/smmu-common.h:170:1: note: use 'static' to give inline function 'smmu_iotlb_inv_iova' internal linkage
void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova,
^
static
None of our code base require / use inlined functions with external
linkage. Some places use internal inlining in the hot path. These
two functions are certainly not in any hot path and don't justify
any inlining, so these are likely oversights rather than intentional.
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221216214924.4711-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is not used anywhere outside this file,
so we can make the function "static void".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221216214924.4711-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Silent when compiling with -Wextra:
../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers]
{ NULL }
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221220142520.24094-4-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221220142520.24094-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add 8.0 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Reviewed-by: Cédric Le Goater <clg@kaod.org> [ppc]
Reviewed-by: Thomas Huth <thuth@redhat.com> [s390x]
Reviewed-by: Greg Kurz <groug@kaod.org> [ppc]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20221212152145.124317-2-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
* hw/arm/virt: Add properties to allow more granular
configuration of use of highmem space
* target/arm: Add Cortex-A55 CPU
* hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
* Implement FEAT_EVT
* Some 3-phase-reset conversions for Arm GIC, SMMU
* hw/arm/boot: set initrd with #address-cells type in fdt
* hw/misc: Move some arm-related files from specific_ss into softmmu_ss
* Restrict arm_cpu_exec_interrupt() to TCG accelerator
-----BEGIN PGP SIGNATURE-----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=YAjF
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20221215-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm/virt: Add properties to allow more granular
configuration of use of highmem space
* target/arm: Add Cortex-A55 CPU
* hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
* Implement FEAT_EVT
* Some 3-phase-reset conversions for Arm GIC, SMMU
* hw/arm/boot: set initrd with #address-cells type in fdt
* hw/misc: Move some arm-related files from specific_ss into softmmu_ss
* Restrict arm_cpu_exec_interrupt() to TCG accelerator
# gpg: Signature made Thu 15 Dec 2022 17:38:36 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20221215-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
target/arm: Restrict arm_cpu_exec_interrupt() to TCG accelerator
hw/misc: Move some arm-related files from specific_ss into softmmu_ss
hw/arm/boot: set initrd with #address-cells type in fdt
hw/intc: Convert TYPE_KVM_ARM_ITS to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_ITS to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_ITS_COMMON to 3-phase reset
hw/intc: Convert TYPE_KVM_ARM_GICV3 to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_COMMON to 3-phase reset
hw/intc: Convert TYPE_ARM_GIC_KVM to 3-phase reset
hw/intc: Convert TYPE_ARM_GIC_COMMON to 3-phase reset
hw/arm: Convert TYPE_ARM_SMMUV3 to 3-phase reset
hw/arm: Convert TYPE_ARM_SMMU to 3-phase reset
target/arm: Report FEAT_EVT for TCG '-cpu max'
target/arm: Implement HCR_EL2.TID4 traps
target/arm: Implement HCR_EL2.TICAB,TOCU traps
target/arm: Implement HCR_EL2.TTLBOS traps
target/arm: Implement HCR_EL2.TTLBIS traps
target/arm: Allow relevant HCR bits to be written for FEAT_EVT
hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
target/arm: Add Cortex-A55 CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We use 32bit value for linux,initrd-[start/end], when we have
loader_start > 4GB, there will be a wrong initrd_start passed
to the kernel, and the kernel will report the following warning.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] initrd not fully accessible via the linear mapping -- please check your bootloader ...
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/mm/init.c:355 arm64_memblock_init+0x158/0x244
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.1.0-rc3-13250-g30a0b95b1335-dirty #28
[ 0.000000] Hardware name: Horizon Sigi Virtual development board (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : arm64_memblock_init+0x158/0x244
[ 0.000000] lr : arm64_memblock_init+0x158/0x244
[ 0.000000] sp : ffff800009273df0
[ 0.000000] x29: ffff800009273df0 x28: 0000001000cc0010 x27: 0000800000000000
[ 0.000000] x26: 000000000050a3e2 x25: ffff800008b46000 x24: ffff800008b46000
[ 0.000000] x23: ffff800008a53000 x22: ffff800009420000 x21: ffff800008a53000
[ 0.000000] x20: 0000000004000000 x19: 0000000004000000 x18: 00000000ffff1020
[ 0.000000] x17: 6568632065736165 x16: 6c70202d2d20676e x15: 697070616d207261
[ 0.000000] x14: 656e696c20656874 x13: 0a2e2e2e20726564 x12: 0000000000000000
[ 0.000000] x11: 0000000000000000 x10: 00000000ffffffff x9 : 0000000000000000
[ 0.000000] x8 : 0000000000000000 x7 : 796c6c756620746f x6 : 6e20647274696e69
[ 0.000000] x5 : ffff8000093c7c47 x4 : ffff800008a2102f x3 : ffff800009273a88
[ 0.000000] x2 : 80000000fffff038 x1 : 00000000000000c0 x0 : 0000000000000056
[ 0.000000] Call trace:
[ 0.000000] arm64_memblock_init+0x158/0x244
[ 0.000000] setup_arch+0x164/0x1cc
[ 0.000000] start_kernel+0x94/0x4ac
[ 0.000000] __primary_switched+0xb4/0xbc
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000001000000000-0x0000001007ffffff]
This doesn't affect any machine types we currently support, because
for all of our machine types the RAM starts well below the 4GB
mark, but it does demonstrate that we're not currently writing
the device-tree properties quite as intended.
To fix it, we can change it to write these values to the dtb using a
type width matching #address-cells. This is the intended size for
these dtb properties, and is how u-boot, for instance, writes them,
although in practice the Linux kernel will cope with them being any
width as long as they're big enough to fit the value.
Signed-off-by: Schspa Shi <schspa@gmail.com>
Message-id: 20221129160724.75667-1-schspa@gmail.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the TYPE_ARM_SMMUV3 device to 3-phase reset. The legacy
reset method doesn't do anything that's invalid in the hold phase, so
the conversion only requires changing it to a hold phase method, and
using the 3-phase versions of the "save the parent reset method and
chain to it" code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221109161444.3397405-3-peter.maydell@linaro.org
Convert the TYPE_ARM_SMMU device to 3-phase reset. The legacy method
doesn't do anything that's invalid in the hold phase, so the
conversion is simple and not a behaviour change.
Note that we must convert this base class before we can convert the
TYPE_ARM_SMMUV3 subclass -- transitional support in Resettable
handles "chain to parent class reset" when the base class is 3-phase
and the subclass is still using legacy reset, but not the other way
around.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221109161444.3397405-2-peter.maydell@linaro.org
The Cortex-A55 is one of the newer armv8.2+ CPUs; in particular
it supports the Privileged Access Never (PAN) feature. Add
a model of this CPU, so you can use a CPU type on the virt
board that models a specific real hardware CPU, rather than
having to use the QEMU-specific "max" CPU type.
Signed-off-by: Timofey Kutergin <tkutergin@gmail.com>
Message-id: 20221121150819.2782817-1-tkutergin@gmail.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the base_memmap to build the SMBIOS 19 table which provides the address
mapping for a Physical Memory Array (from spec [1] chapter 7.20).
This was present on i386 from commit c97294ec1b
("SMBIOS: Build aggregate smbios tables and entry point").
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.5.0.pdf
The absence of this table is a breach of the specs and is
detected by the FirmwareTestSuite (FWTS), but it doesn't
cause any known problems for guest OSes.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Message-id: 1668789029-5432-1-git-send-email-mihai.carabas@oracle.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 3 high memory regions are usually enabled by default, but they may
be not used. For example, VIRT_HIGH_GIC_REDIST2 isn't needed by GICv2.
This leads to waste in the PA space.
Add properties ("highmem-redists", "highmem-ecam", "highmem-mmio") to
allow users selectively disable them if needed. After that, the high
memory region for GICv3 or GICv4 redistributor can be disabled by user,
the number of maximal supported CPUs needs to be calculated based on
'vms->highmem_redists'. The follow-up error message is also improved
to indicate if the high memory region for GICv3 and GICv4 has been
enabled or not.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221029224307.138822-8-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After the improvement to high memory region address assignment is
applied, the memory layout can be changed, introducing possible
migration breakage. For example, VIRT_HIGH_PCIE_MMIO memory region
is disabled or enabled when the optimization is applied or not, with
the following configuration. The configuration is only achievable by
modifying the source code until more properties are added to allow
users selectively disable those high memory regions.
pa_bits = 40;
vms->highmem_redists = false;
vms->highmem_ecam = false;
vms->highmem_mmio = true;
# qemu-system-aarch64 -accel kvm -cpu host \
-machine virt-7.2,compact-highmem={on, off} \
-m 4G,maxmem=511G -monitor stdio
Region compact-highmem=off compact-highmem=on
----------------------------------------------------------------
MEM [1GB 512GB] [1GB 512GB]
HIGH_GIC_REDISTS2 [512GB 512GB+64MB] [disabled]
HIGH_PCIE_ECAM [512GB+256MB 512GB+512MB] [disabled]
HIGH_PCIE_MMIO [disabled] [512GB 1TB]
In order to keep backwords compatibility, we need to disable the
optimization on machine, which is virt-7.1 or ealier than it. It
means the optimization is enabled by default from virt-7.2. Besides,
'compact-highmem' property is added so that the optimization can be
explicitly enabled or disabled on all machine types by users.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-7-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are three high memory regions, which are VIRT_HIGH_REDIST2,
VIRT_HIGH_PCIE_ECAM and VIRT_HIGH_PCIE_MMIO. Their base addresses
are floating on highest RAM address. However, they can be disabled
in several cases.
(1) One specific high memory region is likely to be disabled by
code by toggling vms->highmem_{redists, ecam, mmio}.
(2) VIRT_HIGH_PCIE_ECAM region is disabled on machine, which is
'virt-2.12' or ealier than it.
(3) VIRT_HIGH_PCIE_ECAM region is disabled when firmware is loaded
on 32-bits system.
(4) One specific high memory region is disabled when it breaks the
PA space limit.
The current implementation of virt_set_{memmap, high_memmap}() isn't
optimized because the high memory region's PA space is always reserved,
regardless of whatever the actual state in the corresponding
vms->highmem_{redists, ecam, mmio} flag. In the code, 'base' and
'vms->highest_gpa' are always increased for case (1), (2) and (3).
It's unnecessary since the assigned PA space for the disabled high
memory region won't be used afterwards.
Improve the address assignment for those three high memory region by
skipping the address assignment for one specific high memory region if
it has been disabled in case (1), (2) and (3). The memory layout may
be changed after the improvement is applied, which leads to potential
migration breakage. So 'vms->highmem_compact' is added to control if
the improvement should be applied. For now, 'vms->highmem_compact' is
set to false, meaning that we don't have memory layout change until it
becomes configurable through property 'compact-highmem' in next patch.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-6-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces virt_get_high_memmap_enabled() helper, which returns
the pointer to vms->highmem_{redists, ecam, mmio}. The pointer will
be used in the subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-5-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces variable 'region_base' for the base address of the
specific high memory region. It's the preparatory work to optimize
high memory region address assignment.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-4-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This renames variable 'size' to 'region_size' in virt_set_high_memmap().
Its counterpart ('region_base') will be introduced in next patch.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-3-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces virt_set_high_memmap() helper. The logic of high
memory region address assignment is moved to the helper. The intention
is to make the subsequent optimization for high memory region address
assignment easier.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-2-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
include/qapi/error.h advises to put ERRP_GUARD() right at the
beginning of the function, because only then can it guard the whole
function. Clean up the few spots disregarding the advice.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When error_propagate(errp, local_err) is the only reader of
@local_err, we can just as well change its writers to write @errp
directly, and drop the error_propagate() along with @local_err.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
=zTCn
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci,pc,virtio: features, tests, fixes, cleanups
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
# uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
# 5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
# Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
# 6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
# EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
# =zTCn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 07 Nov 2022 14:27:53 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (83 commits)
checkpatch: better pattern for inline comments
hw/virtio: introduce virtio_device_should_start
tests/acpi: update tables for new core count test
bios-tables-test: add test for number of cores > 255
tests/acpi: allow changes for core_count2 test
bios-tables-test: teach test to use smbios 3.0 tables
hw/smbios: add core_count2 to smbios table type 4
vhost-user: Support vhost_dev_start
vhost: Change the sequence of device start
intel-iommu: PASID support
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
intel-iommu: drop VTDBus
intel-iommu: don't warn guest errors when getting rid2pasid entry
vfio: move implement of vfio_get_xlat_addr() to memory.c
tests: virt: Update expected *.acpihmatvirt tables
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
hw/arm/virt: Enable HMAT on arm virt machine
tests: Add HMAT AArch64/virt empty table files
tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT:
tests: acpi: q35: add test for hmat nodes without initiators
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since the patchset ("Build ACPI Heterogeneous Memory Attribute Table (HMAT)"),
HMAT is supported, but only x86 is enabled. Enable HMAT on arm virt machine.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221027100037.251-7-hesham.almatary@huawei.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MADT has been updated with the GIC Structures from ACPI 6.0 Errata A
and so MADT revision and GICC Structure must be updated also.
Fixes: 37f33084ed ("acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table")
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221011181730.10885-4-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Update the Fixed ACPI Description Table (FADT) to revision 6.0 of the ACPI
specification adding the field "Hypervisor Vendor Identity".
This field's description states the following: "64-bit identifier of hypervisor
vendor. All bytes in this field are considered part of the vendor identity.
These identifiers are defined independently by the vendors themselves,
usually following the name of the hypervisor product. Version information
should NOT be included in this field - this shall simply denote the vendor's
name or identifier. Version information can be communicated through a
supplemental vendor-specific hypervisor API. Firmware implementers would
place zero bytes into this field, denoting that no hypervisor is present in
the actual firmware."
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221011181730.10885-3-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we direct boot a kernel on a CPU which emulates EL3, we need to
set up the EL3 system registers as the Linux kernel documentation
specifies:
https://www.kernel.org/doc/Documentation/arm64/booting.rst
For CPUs with FEAT_HCX support this includes:
- SCR_EL3.HXEn (bit 38) must be initialised to 0b1.
but we forgot to do this when implementing FEAT_HCX, which would mean
that a guest trying to access the HCRX_EL2 register would crash.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221027140207.413084-3-peter.maydell@linaro.org
When we direct boot a kernel on a CPU which emulates EL3, we need
to set up the EL3 system registers as the Linux kernel documentation
specifies:
https://www.kernel.org/doc/Documentation/arm64/booting.rst
For SVE and SME this includes:
- ZCR_EL3.LEN must be initialised to the same value for all CPUs the
kernel is executed on.
- SMCR_EL3.LEN must be initialised to the same value for all CPUs the
kernel will execute on.
Although we are technically compliant with this, the "same value" we
currently use by default is the reset value of 0. This will end up
forcing the guest kernel's SVE and SME vector length to be only the
smallest supported length.
Initialize the vector length fields to their maximum possible value,
which is 0xf. If the implementation doesn't actually support that
vector length then the effective vector length will be constrained
down to the maximum supported value at point of use.
This allows the guest to use all the vector lengths the emulated CPU
supports (by programming the _EL2 and _EL1 versions of these
registers.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221027140207.413084-2-peter.maydell@linaro.org
When the system reboots, the rng-seed that the FDT has should be
re-randomized, so that the new boot gets a new seed. Since the FDT is in
the ROM region at this point, we add a hook right after the ROM has been
added, so that we have a pointer to that copy of the FDT.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-5-Jason@zx2c4.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Snapshot loading only expects to call deterministic handlers, not
non-deterministic ones. So introduce a way of registering handlers that
won't be called when reseting for snapshots.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-2-Jason@zx2c4.com
[PMM: updated json doc comment with Markus' text; fixed
checkpatch style nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "PCI Bus Binding to: IEEE Std 1275-1994" defines the compatible
string for a PCIe bus or endpoint as "pci<vendorid>,<deviceid>" or
similar. Since the initial binding for PCI virtio-iommu didn't follow
this rule, it was modified to accept both strings and ensure backward
compatibility. Also, the unit-name for the node should be
"device,function".
Fix corresponding dt-validate and dtc warnings:
pcie@10000000: virtio_iommu@16:compatible: ['virtio,pci-iommu'] does not contain items matching the given schema
pcie@10000000: Unevaluated properties are not allowed (... 'virtio_iommu@16' were unexpected)
From schema: linux/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
virtio_iommu@16: compatible: 'oneOf' conditional failed, one must be fixed:
['virtio,pci-iommu'] is too short
'pci1af4,1057' was expected
From schema: dtschema/schemas/pci/pci-bus.yaml
Warning (pci_device_reg): /pcie@10000000/virtio_iommu@16: PCI unit address format error, expected "2,0"
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
-----BEGIN PGP SIGNATURE-----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=u7pS
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu into staging
aspeed queue :
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmNX/WEACgkQUaNDx8/7
# 7KFhERAAhrcLcv15ny8RwatHPjzU00ZPQ0PcxGj1VDT66pCVh6M+rIeRPB2scOey
# Pu8jUvIYJ8w7ozjAP6YTQ1MP/WufniVi91Bx+vs/okSiWZa4dP0/G7NQWoc1at0s
# NBlkg57l1GMEeQb5x8vC1DizTQ1Z8Q8J/Ur3uXukXCmYVJAwHYpl/Foob1IPFgh8
# UcJ55LyuRq99lS8ib6HvRftAsC3DOcA/sl3b/TYR2+iKyi1VS2aZoQzxVCavSBcz
# PoTonT9O4OvIQthAgXRwpylW/aMYU3I7FeyOMKlCNLbmJ8LpVbX2v0KN3WBvWBv4
# OWP0DiqPUuoWFHLUGKbiVOgWQrTQXZyoD70SD/ObE1oMTLmeBoD1oFizQDvokHAR
# g2+gMdWnuWcbyaofY7YwuI6qz22gbrgh8JqX6sEWRDnY7HgCUvPhCsmci+bdN5cf
# dGcE8YKi7aD5gzoU9LRziPlhbwaEsgYLpYS7aGfNcmypgeq6lmNG7xKyw911zCTY
# uqDZWOUJy0tUIUTxoz3o1/KtsTFugjuZ+9W1SxELptJR37iwlP1vumf6bduwcx/3
# ba8tzNoXecXO5Icmq5P3lMNVM/abpkDDKS66HA87mABLEd/eCD0ojR9Kfxo0mD74
# kmQK3MFfJPkTu0ddu1cWhCIgTO7EuLuZL7gzj1oxoeXiU3YcVh8=
# =u7pS
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Oct 2022 11:14:41 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu:
arm/aspeed: Replace mx25l25635e chip model
m25p80: Add the w25q01jvq SFPD table
m25p80: Add the w25q512jv SFPD table
m25p80: Add the w25q256 SFPD table
m25p80: Add the mx66l1g45g SFDP table
m25p80: Add the mx25l25635f SFPD table
m25p80: Add the mx25l25635e SFPD table
m25p80: Add erase size for mx25l25635e
m25p80: Add the n25q256a SFDP table
m25p80: Add basic support for the SFDP command
hw/arm/aspeed: increase Bletchley memory size
ast2600: Drop NEON from the CPU features
aspeed/smc: Cache AspeedSMCClass
ssi: cache SSIPeripheralClass to avoid GET_CLASS()
tests/avocado/machine_aspeed.py: Fix typos on buildroot
hw/i2c/aspeed: Fix old reg slave receive
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A mx25l25635f chip model is generally found on these machines. It's
newer and uses 4B opcodes which is better to exercise the support in
the Linux kernel.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220722063602.128144-9-clg@kaod.org>
Message-Id: <20221013161241.2805140-11-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
For the PVT-class hardware we have increased the memory size of
this device to 2 GiB. Adjust the device model accordingly.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221007110529.3657749-1-patrick@stwcx.xyz>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Currently, the CPU features exposed to the AST2600 QEMU machines are :
half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
vfpd32 lpae evtstrm
But, the features of the Cortex A7 CPU on the Aspeed AST2600 A3 SoC
are :
half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls vfpv4 idiva idivt
lpae evtstrm
Drop NEON support in the Aspeed AST2600 SoC.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220928164719.655586-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These memory allocation functions return void *, and casting to
another pointer type is useless clutter. Drop these casts.
If you really want another pointer type, consider g_new().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220923120025.448759-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
load_image_to_fw_cfg() is duplicated by both arm and loongarch. The same
function will be required by riscv too. So, it's time to refactor and
move this function to a common path.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221004092351.18209-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Per the ACPI 6.5 specification, on the GTDT Table Structure, the Counter Control
Block Address and Counter Read Block Address fields of the GTDT table should be
set to 0xFFFFFFFFFFFFFFFF if not provided, rather than 0x0.
Fixes: 41041e5708 ("acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()")
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20220920162137.75239-3-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
The SMMUv3 node isn't expected to have clock properties
(unlike the SMMUv2). Fix the corresponding dt-validate warning:
smmuv3@9050000: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: linux/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message as suggested by Eric]
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-7-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "msi-parent" property can be used on the PCI node when MSIs do not
contain sideband data (device IDs) [1]. In QEMU, MSI transactions
contain the requester ID, so the PCI node should use the "msi-map"
property instead of "msi-parent". In our case the property describes an
identity map between requester ID and sideband data.
This fixes a warning when passing the DTB generated by QEMU to dtc,
following a recent change to the GICv3 node:
Warning (msi_parent_property): /pcie@10000000:msi-parent: property size (4) too small for cell size 1
[1] linux/Documentation/devicetree/bindings/pci/pci-msi.txt
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-4-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICv3 bindings requires a #msi-cells property for the ITS node. Fix
the corresponding dt-validate warning:
interrupt-controller@8000000: msi-controller@8080000: '#msi-cells' is a required property
From schema: linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The devicetree specification requires a 'model' property in the root
node. Fix the corresponding dt-validate warning:
/: 'model' is a required property
From schema: dtschema/schemas/root-node.yaml
Use the same name for model as for compatible. The specification
recommends that 'compatible' follows the format 'manufacturer,model' and
'model' follows the format 'manufacturer,model-number'. Since our
'compatible' doesn't observe this, 'model' doesn't really need to
either.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect ZynqMP's USB controllers.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220920081517.25401-1-frasse.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that it
should always load it at address 0. This happens to be true of all
our M-profile boards at the moment, but it isn't guaranteed to always
be so: M-profile CPUs can be configured (via init-svtor and
init-nsvtor, which match equivalent hardware configuration signals)
to have the initial vector table at any address, not just zero. (For
instance the Teeny board has the boot ROM at address 0x0200_0000.)
Add a base address argument to armv7m_load_kernel(), so that
callers now pass in both base address and size. All the current
callers pass 0, so this is not a behaviour change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Arm system emulation targets always have TARGET_BIG_ENDIAN clear, so
there is no need to have handling in armv7m_load_kernel() for the
case when it is defined. Remove the unnecessary code.
Side notes:
* our M-profile implementation is always little-endian (that is, it
makes the IMPDEF choice that the read-only AIRCR.ENDIANNESS is 0)
* if we did want to handle big-endian ELF files here we should do it
the way that hw/arm/boot.c:arm_load_elf() does, by looking at the
ELF header to see what endianness the file itself is
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cortex A35 core and enable it for virt board.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220819002015.1663247-1-wuhaotsh@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the introduction of the new TCG GICv4, build_madt() is badly broken
as we do not present any GIC Redistributor structure in MADT for GICv4
guests, so that they have no idea about where the Redistributor
register frames are. This fixes a Linux guest crash at boot time with
ACPI enabled and '-machine gic-version=4'.
While at it, let's convert the remaining hard coded gic_version into
enumeration VIRT_GIC_VERSION_2 for consistency.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220812022018.1069-1-yuzenghui@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix ownership of RAM regions on the fby35 machine
-----BEGIN PGP SIGNATURE-----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=hAJg
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20220801' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fix ownership of RAM regions on the fby35 machine
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmLn1N8ACgkQUaNDx8/7
# 7KHaVA//eh5wIZKeg1Qit8dhVoPXcO7b97KFpBreyCkfdREJpoLjoFe4y+rnKhnL
# tJm6qx1YG5s0UN/ODcy4TyKV9CkpcjsRZ+BHuZ+jjiz3WzuarZUTbZx1jVSJP6z0
# xcXc3CucKe/yyidGV1gKGiWetuXv2F6nYHzfvJ4auei6Rga8rwmiN7Rqf3Qfh6Lw
# Islj/9axfLxGzuMV85uuRZdRrrlmTOjDgnF4mxwVXRrxjtLIaAbzKT6mc1p1FUry
# cuE7bDjbZoT7ftBn5y4gQXV38M3XcWzB1KvzMslldkccU7cTbJg8620KSNiscOkJ
# 03xEJiBJoAzy/X1PUmEODNYUV8a19xcsXEyqaRQiyYtO1XMBDcNkSaiaFacOnhFT
# UxabJf3qvzf1QwAmgxGUdbR5usNXsr8Yrnpf1lew7Mvr3SwOYVXqb/JPp+j7uoV3
# CVvvTFZm+hBQghaHC0wHBX+C3aLsTis4Jppn5loulo6fb9KZiosj2kPRwEIetVkt
# ZgkBOLWRWtizdWKM7HImt7F+v/r7ClFlwAIJj8QQV0HTtVZ+gM6MXWj5oczKENJ8
# vPkoP6AUoOWzKFEhBU5XtQ9DdwPSP9m6zAZXl4LD17tVPUPpsuSEDaxhH5hAEnIR
# 39Mgx7hoK0uLHhM02RrNodD/NDmrZCPV3PwZ979z0Q/C8dttRkY=
# =hAJg
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Aug 2022 06:27:59 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20220801' of https://github.com/legoater/qemu:
aspeed/fby35: Fix owner of the BMC RAM memory region
aspeed: Remove unused fields from AspeedMachineState
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A MachineState object is used as a owner of the RAM region and this
asserts in memory_region_init_ram() when QEMU is built with
CONFIG_QOM_CAST_DEBUG :
/* This will assert if owner is neither NULL nor a DeviceState.
* We only want the owner here for the purposes of defining a
* unique name for migration. TODO: Ideally we should implement
* a naming scheme for Objects which are not DeviceStates, in
* which case we can relax this restriction.
*/
owner_dev = DEVICE(owner);
Use the BMC and BIC objects as the owners of their memory regions.
Cc: Peter Delevoryas <peter@pjd.dev>
Fixes: 778e14cc5c ("aspeed: Add AST2600 (BMC) to fby35")
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Message-Id: <20220727102714.803041-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fixes: 346160cbf2 ("aspeed: Set the dram container at the SoC level")
Message-Id: <20220727102714.803041-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some files wrongly contain the same word twice in a row.
One of them should be removed or replaced.
Message-Id: <20220722145859.1952732-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing in the specs on DMA engine interrupt lines: it should have
been in the "BCM2835 ARM Peripherals" datasheet but the appropriate
"ARM peripherals interrupt table" (p.113) is nearly empty.
All Raspberry Pi models 1-3 (based on bcm2835) have
Linux device tree (arch/arm/boot/dts/bcm2835-common.dtsi +25):
/* dma channel 11-14 share one irq */
This information is repeated in the driver code
(drivers/dma/bcm2835-dma.c +1344):
/*
* in case of channel >= 11
* use the 11th interrupt and that is shared
*/
In this patch channels 0--10 and 11--14 are handled separately.
Signed-off-by: Andrey Makarov <andrey.makarov@auriga.com>
Message-id: 20220716113210.349153-1-andrey.makarov@auriga.com
[PMM: fixed checkpatch nits]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the BIC, the easiest way to run everything is to create two pty's
for each SoC and reserve stdin/stdout for the monitor:
wget https://github.com/facebook/openbmc/releases/download/openbmc-e2294ff5d31d/fby35.mtd
wget https://github.com/peterdelevoryas/OpenBIC/releases/download/oby35-cl-2022.13.01/Y35BCL.elf
qemu-system-arm -machine fby35 \
-drive file=fby35.mtd,format=raw,if=mtd \
-device loader,file=fby35.mtd,addr=0,cpu-num=0 \
-serial pty -serial pty -serial mon:stdio -display none -S
screen /dev/ttys0
screen /dev/ttys1
(qemu) c
This commit only adds the the first server board's Bridge IC, but in the
future we'll try to include the other three server board Bridge IC's
too.
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220705191400.41632-9-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The BMC boots from the first flash device by fetching instructions
from the flash contents. Add an alias region on 0x0 for this
purpose. There are currently performance issues with this method (TBs
being flushed too often), so as a faster alternative, install the
flash contents as a ROM in the BMC memory space.
See commit 1a15311a12 ("hw/arm/aspeed: add a 'execute-in-place'
property to boot directly from CE0")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
[ clg: blk_pread() fixes ]
Message-Id: <20220705191400.41632-8-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
You can test booting the BMC with both '-device loader' and '-drive
file'. This is necessary because of how the fb-openbmc boot sequence
works (jump to 0x20000000 after U-Boot SPL).
wget https://github.com/facebook/openbmc/releases/download/openbmc-e2294ff5d31d/fby35.mtd
qemu-system-arm -machine fby35 -nographic \
-device loader,file=fby35.mtd,addr=0,cpu-num=0 -drive file=fby35.mtd,format=raw,if=mtd
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220705191400.41632-7-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This change moves the code that connects the SoC UART's to serial_hd's
to the machine.
It makes each UART a proper child member of the SoC, and then allows the
machine to selectively initialize the chardev for each UART with a
serial_hd.
This should preserve backwards compatibility, but also allow multi-SoC
boards to completely change the wiring of serial devices from the
command line to specific SoC UART's.
This also removes the uart-default property from the SoC, since the SoC
doesn't need to know what UART is the "default" on the machine anymore.
I tested this using the images and commands from the previous
refactoring, and another test image for the ast1030:
wget https://github.com/facebook/openbmc/releases/download/v2021.49.0/fuji.mtd
wget https://github.com/facebook/openbmc/releases/download/v2021.49.0/wedge100.mtd
wget https://github.com/peterdelevoryas/OpenBIC/releases/download/oby35-cl-2022.13.01/Y35BCL.elf
Fuji uses UART1:
qemu-system-arm -machine fuji-bmc \
-drive file=fuji.mtd,format=raw,if=mtd \
-nographic
ast2600-evb uses uart-default=UART5:
qemu-system-arm -machine ast2600-evb \
-drive file=fuji.mtd,format=raw,if=mtd \
-serial null -serial mon:stdio -display none
Wedge100 uses UART3:
qemu-system-arm -machine palmetto-bmc \
-drive file=wedge100.mtd,format=raw,if=mtd \
-serial null -serial null -serial null \
-serial mon:stdio -display none
AST1030 EVB uses UART5:
qemu-system-arm -machine ast1030-evb \
-kernel Y35BCL.elf -nographic
Fixes: 6827ff20b2 ("hw: aspeed: Init all UART's with serial devices")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220705191400.41632-4-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
To support multiple SoC's running simultaneously, we need a unique name for
each RAM region. DRAM is created by the machine, but SRAM is created by the
SoC, since in hardware it is part of the SoC's internals.
We need a way to uniquely identify each SRAM region though, for VM
migration. Since each of the SoC's CPU's has an index which identifies it
uniquely from other CPU's in the machine, we can use the index of any of the
CPU's in the SoC to uniquely identify differentiate the SRAM name from other
SoC SRAM's. In this change, I just elected to use the index of the first CPU
in each SoC.
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220705191400.41632-3-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pread(blk, offset, buf, bytes, flags)
+ blk_pread(blk, offset, bytes, buf, flags)
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pwrite(blk, offset, buf, bytes, flags)
+ blk_pwrite(blk, offset, bytes, buf, flags)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement it using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes; @@
- blk_pread(blk, offset, buf, bytes)
+ blk_pread(blk, offset, buf, bytes, 0)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-3-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In 60592cfed2 ("hw/arm/virt: dt: add kaslr-seed property"), the
kaslr-seed property was added, but the equally as important rng-seed
property was forgotten about, which has identical semantics for a
similar purpose. This commit implements it in exactly the same way as
kaslr-seed. It then changes the name of the disabling option to reflect
that this has more to do with randomness vs determinism, rather than
something particular about kaslr.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[PMM: added deprecated.rst section for the deprecation]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces a really basic PECI controller that responses to
commands by always setting the response code to success and then raising
an interrupt to indicate the command is done. This helps avoid getting
hit with constant errors if the driver continuously attempts to send a
command and keeps timing out.
The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC.
They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support
PECI 4.0, which includes more read/write buffer registers from 0x80 to
0xFC to support 64-byte mode.
This patch doesn't attempt to handle that, or to create a different
version of the controller for the different generations, since it's only
implementing functionality that is common to all generations.
The basic sequence of events is that the firmware will read and write to
various registers and then trigger a command by setting the FIRE bit in
the command register (similar to the I2C controller).
Then the firmware waits for an interrupt from the PECI controller,
expecting the interrupt status register to be filled in with info on
what happened. If the command was transmitted and received successfully,
then response codes from the host CPU will be found in the data buffer
registers.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-12-me@pjd.dev>
[ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add an asynchronous version of i2c_send() that requires the slave to
explicitly acknowledge on the bus with i2c_ack().
The current master must use the new i2c_start_send_async() to indicate
that it wants to do an asynchronous transfer. This allows the i2c core
to check if the target slave supports this or not. This approach relies
on adding a new enum i2c_event member, which is why a bunch of other
devices needs changes in their event handling switches.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220601210831.67259-5-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-6-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add MAX31785 fan controllers in machines so that the Linux driver
populates the sysfs interface.
Firework has two MAX31785 Fan controllers at 0x52, and 0x54 on bus 9.
Witherspoon has one at 0x52 on bus 3.
Rainier has one at 0x52 on bus 7.
Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-6-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
sysbus_mmio_map maps devices into "get_system_memory()".
With the new SoC memory attribute, we want to make sure that each device is
mapped into the SoC memory.
In single SoC machines, the SoC memory is the same as "get_system_memory()",
but in multi SoC machines it will be different.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220624003701.1363500-4-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Multi-SoC machines can use this property to specify a memory container
for each SoC. Single SoC machines will just specify get_system_memory().
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220624003701.1363500-3-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Currently, the Aspeed machines allocate a ram container region in
which the machine ram region is mapped. See commit ad1a978218
("aspeed: add a RAM memory region container"). An extra region is
mapped after ram in the ram container to catch invalid access done by
FW. That's how FW determines the size of ram. See commit ebe31c0a8e
("aspeed: add a max_ram_size property to the memory controller").
Let's move all the logic under the SoC where it should be. It will
also ease the work on multi SoC support.
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220623202123.3972977-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Move the code from hw/arm/virt.c that is supposed
to handle v7 into the one function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Message-id: 20220619001541.131672-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the I2C buses in AST1030 model and create two slave device
for ast1030-evb.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[ clg : - adapted to current AST1030 upstream models
- changed AST2600 to AST1030 in comment
- fixed typo in commit log ]
Message-Id: <20220324100439.478317-3-troy_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The board has no such device. It might have been useful for some tests
in the past, it's not anymore and the same can be achieved on the
command line.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Various loader functions return an int which limits images to 2GB which
is fine for things like a BIOS/kernel image, but if we want to be able
to load memory images or large ramdisks then any file over 2GB would
silently fail to load.
Cc: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211111141141.3295094-2-jamie@nuviainc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the display port has been initially implemented the device
driver wasn't using interrupts. Now that the display port driver
waits for vblank interrupt it has been noticed that the irq mapping
is wrong. So use the value from the linux device tree and the
ultrascale+ reference manual.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-5-fkonrad@xilinx.com
[PMM: refold lines in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add EEPROM and LM75 temperature sensor according to hardware schematic
Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST1030 integrates one set of Parallel GPIO Controller
with maximum 151 control pins, which are 21 groups
(A~U, exclude pin: M6 M7 Q5 Q6 Q7 R0 R1 R4 R5 R6 R7 S0 S3 S4
S5 S6 S7 ) and the group T and U are input only.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220525053444.27228-3-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Background:
AspeedMachineClass.uart_default specifies the serial console UART, which
usually corresponds to the "stdout-path" in the device tree.
The default value is UART5, since most boards use UART5 for this:
amc->uart_default = ASPEED_DEV_UART5;
Users can override AspeedMachineClass.uart_default in their board's machine
class init to specify something besides UART5. For example, for fuji-bmc:
amc->uart_default = ASPEED_DEV_UART1;
We only connect this one UART, of the 5 UART's on the AST2400 and AST2500
and the 13 UART's on the AST2600 and AST1030, to a serial device that QEMU
users can use. None of the other UART's are initialized, and the only way
to override this attribute is by creating a specialized board definition,
requiring QEMU source code changes and rebuilding.
The result of this is that if you want to get serial console output on a
board that uses UART3, you need to add a board definition. This was
encountered by Zev in OpenBMC. [1]
Changes:
This commit initializes all of the UART's present on each Aspeed chip with
serial devices and allows the QEMU user to connect as many or few as they
like to serial devices. For example, you can still run QEMU and just connect
stdout to the machine's default UART, without specifying any additional
serial devices:
qemu-system-arm -machine fuji-bmc \
-drive file=fuji.mtd,format=raw,if=mtd \
-nographic
However, if you don't want to add a special machine definition, you can now
manually configure UART1 to connect to stdout and get serial console output,
even if the machine's default is UART5:
qemu-system-arm -machine ast2600-evb \
-drive file=fuji.mtd,format=raw,if=mtd \
-serial null -serial mon:stdio -display none
In the example above, the first "-serial null" argument is connected to
UART5, and "-serial mon:stdio" is connected to UART1.
Another example: you can get serial console output from Wedge100, which uses
UART3, by reusing the palmetto AST2400 machine and rewiring the serial
device arguments:
qemu-system-arm -machine palmetto-bmc \
-drive file=wedge100.mtd,format=raw,if=mtd \
-serial null -serial null -serial null \
-serial mon:stdio -display none
There is a slight change in behavior introduced with this change: now, each
UART's memory-mapped IO region will have a serial device model connected to
it. Previously, all reads and writes to those regions would be ineffective
and return zero values, but now some values will be nonzero, even when the
user doesn't connect a serial device backend (like a socket, file, etc). For
example, the line status register might indicate that the transmit buffer is
empty now, whereas previously it might have always indicated it was full.
[1] https://lore.kernel.org/openbmc/YnzGnWjkYdMUUNyM@hatter.bewilderbeest.net/
[2] https://github.com/facebook/openbmc/releases/download/v2021.49.0/fuji.mtd
[3] https://github.com/facebook/openbmc/releases/download/v2021.49.0/wedge100.mtd
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-6-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The AST1030 machine initialization was not respecting the Aspeed SoC
property "uart-default", which specifies which UART should be connected to
the first serial device, it was just always connecting UART5. This doesn't
change any behavior, because the default value for "uart-default" is UART5,
but it makes it possible to override this in new machine definitions using
the AST1030.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-4-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2400 and AST2500 have 5 UART's, while the AST2600 and AST1030 have 13.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-3-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This adds the missing UART memory and IRQ mappings for the AST2400, AST2500,
AST2600, and AST1030.
This also includes the new UART interfaces added in the AST2600 and AST1030
from UART6 to UART13. The addresses and interrupt numbers for these two
later chips are identical.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
and make routine aspeed_soc_get_irq() common to all SoCs. This will be
useful to share code.
Cc: Jamin Lin <jamin_lin@aspeedtech.com>
Cc: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516055620.2380197-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add the 'fby35-bmc' machine type based on the kernel DTS[1] and userspace
i2c setup scripts[2]. Undefined values are inherited from the AST2600-EVB.
Reference images can be found in Facebook OpenBMC Github Release assets
as "fby35.mtd". [3]
You can boot the reference images as follows (fby35 uses dual-flash):
qemu-system-arm -machine fby35-bmc \
-drive file=fby35.mtd,format=raw,if=mtd \
-drive file=fby35.mtd,format=raw,if=mtd \
-nographic
[1] 412d505325/arch/arm/boot/dts/aspeed-bmc-facebook-fby35.dts
[2] e2294ff5d3/meta-facebook/meta-fby35/recipes-fby35/plat-utils/files/setup-dev.sh
[3] https://github.com/facebook/openbmc/releases
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220503225925.1798324-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We had a few CPTR_* bits defined, but missed quite a few.
Complete all of the fields up to ARMv9.2.
Use FIELD_EX64 instead of manual extract32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517054850.177016-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
