Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add signature and signature-granularity properties in spike to specify the target
signatrue file and the line size for signature data.
Recgonize the signature section between begin_signature and end_signature symbols
when loading elf of ACT tests. Then dump signature data in signature section just
before the ACT tests exit.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230405095720.75848-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Initialize the ACPI tables if the acpi option is not
disabled.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-8-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V ACPI platforms need to provide RISC-V Hart Capabilities
Table (RHCT). Add this to the ACPI tables.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-7-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add Multiple APIC Description Table (MADT) with the
RINTC structure for each cpu.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-6-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add basic ACPI infrastructure for RISC-V with below tables.
1) DSDT with below basic objects
- CPUs
- fw_cfg
2) FADT revision 6 with HW_REDUCED flag
3) XSDT
4) RSDP
Add this functionality in a new file virt-acpi-build.c and enable
building this infrastructure.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-5-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
memmap needs to be exported outside of virt.c so that
modules like acpi can use it. Hence, add a pointer field
in RiscVVirtState structure and initialize it with the
memorymap.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-4-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI will be enabled by default. Add a switch to turn off
for testing and debug purposes.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-3-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI needs OEM_ID and OEM_TABLE_ID for the machine. Add these fields
in the RISCVVirtState structure and initialize with default values.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-2-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The 'mmu-type' should reflect what the hardware is capable of so use the
new satp_mode field in RISCVCPUConfig to do that.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230303131252.892893-6-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cbom-block-size fdt property property is used to inform the OS about
the blocksize in bytes for the Zicbom cache operations. Linux documents
it in Documentation/devicetree/bindings/riscv/cpus.yaml
as:
riscv,cbom-block-size:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The blocksize in bytes for the Zicbom cache operations.
cboz-block-size has the same role but for the Zicboz extension, i.e.
informs the size in bytes for Zicboz cache operations. Linux support
for it is under review/approval in [1]. Patch 3 of that series describes
cboz-block-size as:
riscv,cboz-block-size:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The blocksize in bytes for the Zicboz cache operations.
[1] https://lore.kernel.org/all/20230224162631.405473-1-ajones@ventanamicro.com/
Cc: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-ID: <20230302091406.407824-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move the dtb load bits outside of create_fdt(), and put it explicitly
in sifive_u_machine_init() and virt_machine_init(). With such change
create_fdt() does exactly what its function name tells us.
Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-2-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Launch qemu-system-riscv64 with a given dtb for 'sifive_u' and 'virt'
machines, QEMU complains:
qemu_fdt_add_subnode: Failed to create subnode /soc: FDT_ERR_EXISTS
The whole DT generation logic should be skipped when a given DTB is
present.
Fixes: b1f19f238c ("hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-1-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Read cpu_ptr->cfg.mmu directly. As a bonus, use cpu_ptr in
riscv_isa_string().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-9-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The only remaining caller is riscv_load_kernel_and_initrd() which
belongs to the same file.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206140022.2748401-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The microchip_icicle_kit, sifive_u, spike and virt boards are now doing
the same steps when '-kernel' is used:
- execute load_kernel()
- load init_rd()
- write kernel_cmdline
Let's fold everything inside riscv_load_kernel() to avoid code
repetition. To not change the behavior of boards that aren't calling
riscv_load_init(), add an 'load_initrd' flag to riscv_load_kernel() and
allow these boards to opt out from initrd loading.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230206140022.2748401-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Next patch will move all calls to riscv_load_initrd() to
riscv_load_kernel(). Machines that want to load initrd will be able to
do via an extra flag to riscv_load_kernel().
This change will expose a sign-extend behavior that is happening in
load_elf_ram_sym() when running 32 bit guests [1]. This is currently
obscured by the fact that riscv_load_initrd() is using the return of
riscv_load_kernel(), defined as target_ulong, and this return type will
crop the higher 32 bits that would be padded with 1s by the sign
extension when running in 32 bit targets. The changes to be done will
force riscv_load_initrd() to use an uint64_t instead, exposing it to the
padding when dealing with 32 bit CPUs.
There is a discussion about whether load_elf_ram_sym() should or should
not sign extend the value returned by 'lowaddr'. What we can do is to
prevent the behavior change that the next patch will end up doing.
riscv_load_initrd() wasn't dealing with 64 bit kernel entries when
running 32 bit CPUs, and we want to keep it that way.
One way of doing it is to use target_ulong in 'kernel_entry' in
riscv_load_kernel() and rely on the fact that this var will not be sign
extended for 32 bit targets. Another way is to explictly clear the
higher 32 bits when running 32 bit CPUs for all possibilities of
kernel_entry.
We opted for the later. This will allow us to be clear about the design
choices made in the function, while also allowing us to add a small
comment about what load_elf_ram_sym() is doing. With this change, the
consolation patch can do its job without worrying about unintended
behavioral changes.
[1] https://lists.gnu.org/archive/html/qemu-devel/2023-01/msg02281.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206140022.2748401-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There is no need to declare an intermediate "MachineState *ms".
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206085007.3618715-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As it is now, riscv_compute_fdt_addr() is receiving a dram_base, a
mem_size (which is defaulted to MachineState::ram_size in all boards)
and the FDT pointer. And it makes a very important assumption: the DRAM
interval dram_base + mem_size is contiguous. This is indeed the case for
most boards that use a FDT.
The Icicle Kit board works with 2 distinct RAM banks that are separated
by a gap. We have a lower bank with 1GiB size, a gap follows, then at
64GiB the high memory starts. MachineClass::default_ram_size for this
board is set to 1.5Gb, and machine_init() is enforcing it as minimal RAM
size, meaning that there we'll always have at least 512 MiB in the Hi
RAM area.
Using riscv_compute_fdt_addr() in this board is weird because not only
the board has sparse RAM, and it's calling it using the base address of
the Lo RAM area, but it's also using a mem_size that we have guarantees
that it will go up to the Hi RAM. All the function assumptions doesn't
work for this board.
In fact, what makes the function works at all in this case is a
coincidence. Commit 1a475d39ef introduced a 3GB boundary for the FDT,
down from 4Gb, that is enforced if dram_base is lower than 3072 MiB. For
the Icicle Kit board, memmap[MICROCHIP_PFSOC_DRAM_LO].base is 0x80000000
(2 Gb) and it has a 1Gb size, so it will fall in the conditions to put
the FDT under a 3Gb address, which happens to be exactly at the end of
DRAM_LO. If the base address of the Lo area started later than 3Gb this
function would be unusable by the board. Changing any assumptions inside
riscv_compute_fdt_addr() can also break it by accident as well.
Let's change riscv_compute_fdt_addr() semantics to be appropriate to the
Icicle Kit board and for future boards that might have sparse RAM
topologies to worry about:
- relieve the condition that the dram_base + mem_size area is contiguous,
since this is already not the case today;
- receive an extra 'dram_size' size attribute that refers to a contiguous
RAM block that the board wants the FDT to reside on.
Together with 'mem_size' and 'fdt', which are now now being consumed by a
MachineState pointer, we're able to make clear assumptions based on the
DRAM block and total mem_size available to ensure that the FDT will be put
in a valid RAM address.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230201171212.1219375-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A common trend in other archs is to calculate the fdt address, which is
usually straightforward, and then calling a function that loads the
fdt/dtb by using that address.
riscv_load_fdt() is doing a bit too much in comparison. It's calculating
the fdt address via an elaborated heuristic to put the FDT at the bottom
of DRAM, and "bottom of DRAM" will vary across boards and
configurations, then it's actually loading the fdt, and finally it's
returning the fdt address used to the caller.
Reduce the existing complexity of riscv_load_fdt() by splitting its code
into a new function, riscv_compute_fdt_addr(), that will take care of
all fdt address logic. riscv_load_fdt() can then be a simple function
that just loads a fdt at the given fdt address.
We're also taken the opportunity to clarify the intentions and
assumptions made by these functions. riscv_load_fdt() is now receiving a
hwaddr as fdt_addr because there is no restriction of having to load the
fdt in higher addresses that doesn't fit in an uint32_t.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230201171212.1219375-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
fdt_pack() can change the fdt size, meaning that fdt_totalsize() can
contain a now deprecated (bigger) value.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230201171212.1219375-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Follow the QEMU convention of naming MachineState pointers as 'ms' by
renaming the instances where we're calling it 'mc'.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230124212234.412630-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have a convention in other QEMU boards/archs to name MachineState
pointers as either 'machine' or 'ms'. MachineClass pointers are usually
called 'mc'.
The 'virt' RISC-V machine has a lot of instances where MachineState
pointers are named 'mc'. There is nothing wrong with that, but we gain
more compatibility with the rest of the QEMU code base, and easier
reviews, if we follow QEMU conventions.
Rename all 'mc' MachineState pointers to 'ms'. This is a very tedious
and mechanical patch that was produced by doing the following:
- find/replace all 'MachineState *mc' to 'MachineState *ms';
- find/replace all 'mc->fdt' to 'ms->fdt';
- find/replace all 'mc->smp.cpus' to 'ms->smp.cpus';
- replace any remaining occurrences of 'mc' that the compiler complained
about.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230124212234.412630-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_socket_count() returns either ms->numa_state->num_nodes or 1
depending on NUMA support. In any case the value can be retrieved only
once and used in the rest of the function.
This will also alleviate the rename we're going to do next by reducing
the instances of MachineState 'mc' inside hw/riscv/virt.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230124212234.412630-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the CSRs and CSR instructions are disabled because the Zicsr
extension isn't enabled then we want to make sure we don't run any CSR
instructions in the boot ROM.
This patches removes the CSR instructions from the reset-vec if the
extension isn't enabled. We replace the instruction with a NOP instead.
Note that we don't do this for the SiFive U machine, as we are modelling
the hardware in that case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1447
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230123035754.75553-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Updates the opentitan IRQs to match the latest supported commit of
Opentitan from TockOS.
OPENTITAN_SUPPORTED_SHA := 565e4af39760a123c59a184aa2f5812a961fde47
Memory layout as per [1]
[1] 565e4af397/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230123063619.222459-1-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 1c20d3ff60 ("hw/riscv: virt: Add a machine done notifier")
moved the initialization of fw_cfg to the virt_machine_done() callback.
Problem is that the validation of fw_cfg by devices such as ramfb is
done before the machine done notifier is called. Moving create_fw_cfg()
to machine_done() results in QEMU failing to boot when using a ramfb
device:
./qemu-system-riscv64 -machine virt -device ramfb -serial stdio
qemu-system-riscv64: -device ramfb: ramfb device requires fw_cfg with DMA
The fix is simple: move create_fw_cfg() config back to
virt_machine_init(). This happens to be the same way the ARM 'virt'
machine deals with fw_cfg (see machvirt_init() and virt_machine_done()
in hw/arm/virt.c), so we're keeping consistency with how other machines
handle this device.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1343
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230117132751.229738-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There's no need to use a MachineState pointer and a fdt pointer now that
all RISC-V machines are using the FDT from the MachineState.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There's no need to use a MachineState pointer and a fdt pointer now that
all RISC-V machines are using the FDT from the MachineState.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt_socket_cpus() writes a different 'mmu-type' value if we're
running in 32 or 64 bits. However, the flag is being calculated during
virt_machine_init(), and is passed around in create_fdt(), then
create_fdt_socket(), and then finally create_fdt_socket_cpus(). None of
the intermediate functions are using the flag, which is a bit
misleading.
Remove 'is_32_bit' flag from create_fdt_socket_cpus() and calculate it
using the already available RISCVVirtState pointer. This will also
change the signature of create_fdt_socket() and create_fdt(), making it
clear that these functions don't do anything special when we're running
in 32 bit mode.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'cmdline' isn't being used. Remove it.
A MachineState pointer is being retrieved via a MACHINE() macro calling
qdev_get_machine(). Use MACHINE(s) instead to avoid calling qdev().
'mem_size' is being set as machine->ram_size by the caller. Retrieve it
via ms->ram_size.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'mem_size' and 'cmdline' aren't being used. Remove them.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'mem_size' and 'cmdline' are unused.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All callers are using kernel_filename as machine->kernel_filename.
This will also simplify the changes in riscv_load_kernel() that we're
going to do next.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'filename', 'mem_size' and 'fdt' from riscv_load_initrd() can all be
retrieved by the MachineState object for all callers.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The sifive_u, spike and virt machines are writing the 'bootargs' FDT
node during their respective create_fdt().
Given that bootargs is written only when '-append' is used, and this
option is only allowed with the '-kernel' option, which in turn is
already being check before executing riscv_load_kernel(), write
'bootargs' in the same code path as riscv_load_kernel().
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_load_initrd() returns the initrd end addr while also writing a
'start' var to mark the addr start. These informations are being used
just to write the initrd FDT node. Every existing caller of
riscv_load_initrd() is writing the FDT in the same manner.
We can simplify things by writing the FDT inside riscv_load_initrd(),
sparing callers from having to manage start/end addrs to write the FDT
themselves.
An 'if (fdt)' check is already inserted at the end of the function
because we'll end up using it later on with other boards that doesn´t
have a FDT.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This will make the code more in line with what the other boards are
doing. We'll also avoid an extra check to machine->kernel_filename since
we already checked that before executing riscv_load_kernel().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230102115241.25733-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_load_firmware(), riscv_load_initrd() and riscv_load_kernel() works
under the assumption that a 'filename' parameter is always not NULL.
This is currently the case since all callers of these functions are
checking for NULL before calling them. Add an g_assert() to make sure
that a NULL value in these cases are to be considered a bug.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The MachineState object provides a 'fdt' pointer that is already being
used by other RISC-V machines, and it's also used by the 'dumpdtb' QMP
command.
Remove the 'fdt' pointer from SiFiveUState and use MachineState::fdt
instead.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230102115241.25733-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The MachineState object provides a 'fdt' pointer that is already being
used by other RISC-V machines, and it's also used by the 'dumpdtb' QMP
command.
Remove the 'fdt' pointer from SpikeState and use MachineState::fdt
instead.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230102115241.25733-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present create_fdt() calls htif_uses_elf_symbols() to determine
whether to insert a <reg> property for the HTIF. This unfortunately
creates a hidden dependency to riscv_load_{firmware,kernel} that
create_fdt() must be called after the ELF {firmware,kernel} image
has been loaded.
Decouple such dependency be adding a new parameter to create_fdt(),
whether custom HTIF base address is used. The flag will be set if
non ELF {firmware,kernel} image is given by user.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-13-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rename previous riscv_find_firmware() to riscv_find_bios(), and
introduce a new riscv_find_firmware() to implement the first half
part of the work done in riscv_find_and_load_firmware().
This new API is helpful for machine that wants to know the final
chosen firmware file name but does not want to load it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-12-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some boards are duplicating the 'riscv_find_and_load_firmware' call
because the 32 and 64 bits images have different names. Create
a function to handle this detail instead of hardcoding it in the boards.
Ideally we would bake this logic inside riscv_find_and_load_firmware(),
or even create a riscv_load_default_firmware(), but at this moment we
cannot infer whether the machine is running 32 or 64 bits without
accessing RISCVHartArrayState, which in turn can't be accessed via the
common code from boot.c. In the end we would exchange 'firmware_name'
for a flag with riscv_is_32bit(), which isn't much better than what we
already have today.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221221182300.307900-6-dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-11-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The only caller is riscv_find_and_load_firmware(), which is in the same
file.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221221182300.307900-5-dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-10-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Spike machine now supports OpenSBI plain binary bios image, so the
comments are no longer valid.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-9-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present for some unknown reason the HTIF registers (fromhost &
tohost) are defined in the RISC-V CPUArchState. It should really
be put in the HTIFState struct as it is only meaningful to HTIF.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-6-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
struct HTIFState has 3 members for address space and memory region,
and are initialized during htif_mm_init(). But they are actually
useless. Drop them.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-4-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"hartid-base" and "priority-base" are zero by default. There is no
need to initialize them to zero again.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-15-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
