Stack accesses should be explicit and use the privilege level of the
target stack. This ensures that SMAP is not applied when the target
stack is in ring 3.
This fixes a bug wherein i386/tcg assumed that an interrupt return, or a
far call using the CALL or JMP instruction, was always going from kernel
or user mode to kernel mode when using a call gate. This assumption is
violated if the call gate has a DPL that is greater than 0.
Analyzed-by: Robert R. Henry <rrh.henry@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/249
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This value used to reflect the maximum supported memslots from KVM kernel.
Rename it to be clearer.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240917163835.194664-5-peterx@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will make all nr_slots counters to be named in the same manner.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240917163835.194664-4-peterx@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the default max nr_slots a macro, it's only used when KVM reports
nothing.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240917163835.194664-3-peterx@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zhiyi reported an infinite loop issue in VFIO use case. The cause of that
was a separate discussion, however during that I found a regression of
dirty sync slowness when profiling.
Each KVMMemoryListerner maintains an array of kvm memslots. Currently it's
statically allocated to be the max supported by the kernel. However after
Linux commit 4fc096a99e ("KVM: Raise the maximum number of user memslots"),
the max supported memslots reported now grows to some number large enough
so that it may not be wise to always statically allocate with the max
reported.
What's worse, QEMU kvm code still walks all the allocated memslots entries
to do any form of lookups. It can drastically slow down all memslot
operations because each of such loop can run over 32K times on the new
kernels.
Fix this issue by making the memslots to be allocated dynamically.
Here the initial size was set to 16 because it should cover the basic VM
usages, so that the hope is the majority VM use case may not even need to
grow at all (e.g. if one starts a VM with ./qemu-system-x86_64 by default
it'll consume 9 memslots), however not too large to waste memory.
There can also be even better way to address this, but so far this is the
simplest and should be already better even than before we grow the max
supported memslots. For example, in the case of above issue when VFIO was
attached on a 32GB system, there are only ~10 memslots used. So it could
be good enough as of now.
In the above VFIO context, measurement shows that the precopy dirty sync
shrinked from ~86ms to ~3ms after this patch applied. It should also apply
to any KVM enabled VM even without VFIO.
NOTE: we don't have a FIXES tag for this patch because there's no real
commit that regressed this in QEMU. Such behavior existed for a long time,
but only start to be a problem when the kernel reports very large
nr_slots_max value. However that's pretty common now (the kernel change
was merged in 2021) so we attached cc:stable because we'll want this change
to be backported to stable branches.
Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240917163835.194664-2-peterx@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now all decoding has been done before any code generation.
There is no need anymore to save and restore cc_op* and
pc_save but, for the time being, assert that this is indeed
the case.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Group them so that it is easier to figure out which two-byte opcodes to
tackle together.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is already checked before getting there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The gen_cmpxchg8b and gen_cmpxchg16b functions even have the correct
prototype already; the only thing that needs to be done is removing the
gen_lea_modrm() call.
This moves the last LOCK-enabled instructions to the new decoder. It is
now possible to assume that gen_multi0F is called only after checking
that PREFIX_LOCK was not specified.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are now relatively few unconverted opcodes in translate.c (there
are 13 of them including 8 for x87), and all of them have the same
format with a mod/rm byte and no immediate. A good next step is
to remove the early bail out to disas_insn_x87/disas_insn_old,
instead giving these legacy translator functions the same prototype
as the other gen_* functions.
To do this, the X86DecodeInsn can be passed down to the places that
used to fetch address bytes from the instruction stream. To make
sure that everything is done cleanly, the CPUX86State* argument is
removed.
As part of the unification, the gen_lea_modrm() name is now free,
so rename gen_load_ea() to gen_lea_modrm(). This is as good a name
and it makes the changes to translate.c easier to review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Code generation was rewritten; it reuses the same trick to use the
CC_OP_SAR values for cc_op, but it tries to use CC_OP_ADCX or CC_OP_ADCOX
instead of CC_OP_EFLAGS. This is a tiny bit more efficient in the
common case where only CF is checked in the resulting flags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
32-bit TSTEQ and TSTNE is subject to the same constraints as
for 64-bit, but setcond_i32 and negsetcond_i32 were incorrectly
using TCG_CT_CONST ("i") instead of TCG_CT_CONST_CMP ("C").
Adjust the constraint and make tcg_target_const_match use the
same sequence as tgen_cmp2: first check if the constant is a
valid operand for TSTEQ/TSTNE, then accept everything for 32-bit
non-test comparisons, finally check if the constant is a valid
operand for 64-bit non-test comparisons.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
=uk+a
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241016
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
# 3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
# y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
# ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
# =uk+a
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 16 Oct 2024 09:13:05 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu:
hw/loongarch/fw_cfg: Build in common_ss[]
hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion
target/loongarch: Avoid bits shift exceeding width of bool type
hw/loongarch/virt: Add FDT table support with acpi ged pm register
acpi: ged: Add macro for acpi sleep control register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While hyperv.rst already has all currently implemented Hyper-V
enlightenments documented, it may be unclear what is the recommended set to
achieve the best result. Add the corresponding section to the doc.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-5-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'hyperv_synic' test from KVM unittests was observed to be flaky on certain
hardware (hangs sometimes). Debugging shows that the problem happens in
hyperv_sint_route_new() when the test tries to set up a new SynIC
route. The function bails out on:
if (!synic->sctl_enabled) {
goto cleanup;
}
but the test writes to HV_X64_MSR_SCONTROL just before it starts
establishing SINT routes. Further investigation shows that
synic_update() (called from async_synic_update()) happens after the SINT
setup attempt and not before. Apparently, the comment before
async_safe_run_on_cpu() in kvm_hv_handle_exit() does not correctly describe
the guarantees async_safe_run_on_cpu() gives. In particular, async worked
added to a CPU is actually processed from qemu_wait_io_event() which is not
always called before KVM_RUN, i.e. kvm_cpu_exec() checks whether an exit
request is pending for a CPU and if not, keeps running the vCPU until it
meets an exit it can't handle internally. Hyper-V specific MSR writes are
not automatically trigger an exit.
Fix the issue by simply raising an exit request for the vCPU where SynIC
update was queued. This is not a performance critical path as SynIC state
does not get updated so often (and async_safe_run_on_cpu() is a big hammer
anyways).
Reported-by: Jan Richter <jarichte@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-4-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows with Hyper-V role enabled doesn't boot with 'hv-passthrough' when
no debugger is configured, this significantly limits the usefulness of the
feature as there's no support for subtracting Hyper-V features from CPU
flags at this moment (e.g. "-cpu host,hv-passthrough,-hv-syndbg" does not
work). While this is also theoretically fixable, 'hv-syndbg' is likely
very special and unneeded in the default set. Genuine Hyper-V doesn't seem
to enable it either.
Introduce 'skip_passthrough' flag to 'kvm_hyperv_properties' and use it as
one-off to skip 'hv-syndbg' when enabling features in 'hv-passthrough'
mode. Note, "-cpu host,hv-passthrough,hv-syndbg" can still be used if
needed.
As both 'hv-passthrough' and 'hv-syndbg' are debug features, the change
should not have any effect on production environments.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-3-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Putting HYPERV_FEAT_SYNDBG entry under "#ifdef CONFIG_SYNDBG" in
'kvm_hyperv_properties' array is wrong: as HYPERV_FEAT_SYNDBG is not
the highest feature number, the result is an empty (zeroed) entry in
the array (and not a skipped entry!). hyperv_feature_supported() is
designed to check that all CPUID bits are set but for a zeroed
feature in 'kvm_hyperv_properties' it returns 'true' so QEMU considers
HYPERV_FEAT_SYNDBG as always supported, regardless of whether KVM host
actually supports it.
To fix the issue, leave HYPERV_FEAT_SYNDBG's definition in
'kvm_hyperv_properties' array, there's nothing wrong in having it defined
even when 'CONFIG_SYNDBG' is not set. Instead, put "hv-syndbg" CPU property
under '#ifdef CONFIG_SYNDBG' to alter the existing behavior when the flag
is silently skipped in !CONFIG_SYNDBG builds.
Leave an 'assert' sentinel in hyperv_feature_supported() making sure there
are no 'holes' or improperly defined features in 'kvm_hyperv_properties'.
Fixes: d8701185f4 ("hw: hyperv: Initial commit for Synthetic Debugging device")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-2-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM commit 191c8137a939 ("x86/kvm: Implement HWCR support")
introduced support for emulating HWCR MSR.
Add support for QEMU to save/load this MSR for migration purposes.
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Signed-off-by: Wang Liang <wangliang44@baidu.com>
Link: https://lore.kernel.org/r/20241009095109.66843-1-gaoshiyuan@baidu.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following 5 bits in CPUID.7.2.EDX are supported by KVM. Add their
supports in QEMU. Each of them indicates certain bits of IA32_SPEC_CTRL
are supported. Those bits can control CPU speculation behavior which can
be used to defend against side-channel attacks.
bit0: intel-psfd
if 1, indicates bit 7 of the IA32_SPEC_CTRL MSR is supported. Bit 7 of
this MSR disables Fast Store Forwarding Predictor without disabling
Speculative Store Bypass
bit1: ipred-ctrl
If 1, indicates bits 3 and 4 of the IA32_SPEC_CTRL MSR are supported.
Bit 3 of this MSR enables IPRED_DIS control for CPL3. Bit 4 of this
MSR enables IPRED_DIS control for CPL0/1/2
bit2: rrsba-ctrl
If 1, indicates bits 5 and 6 of the IA32_SPEC_CTRL MSR are supported.
Bit 5 of this MSR disables RRSBA behavior for CPL3. Bit 6 of this MSR
disables RRSBA behavior for CPL0/1/2
bit3: ddpd-u
If 1, indicates bit 8 of the IA32_SPEC_CTRL MSR is supported. Bit 8 of
this MSR disables Data Dependent Prefetcher.
bit4: bhi-ctrl
if 1, indicates bit 10 of the IA32_SPEC_CTRL MSR is supported. Bit 10
of this MSR enables BHI_DIS_S behavior.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20240919051011.118309-1-chao.gao@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When user sets tsc-frequency explicitly, the invtsc feature is actually
migratable because the tsc-frequency is supposed to be fixed during the
migration.
See commit d99569d9d8 ("kvm: Allow invtsc migration if tsc-khz
is set explicitly") for referrence.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240814075431.339209-10-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- CPUID.(EAX=07H,ECX=0H):EBX[bit 6]: x87 FPU Data Pointer updated only
on x87 exceptions if 1.
- CPUID.(EAX=07H,ECX=0H):EBX[bit 13]: Deprecates FPU CS and FPU DS
values if 1. i.e., X87 FCS and FDS are always zero.
Define names for them so that they can be exposed to guest with -cpu host.
Also define the bit field MACROs so that named cpu models can add it as
well in the future.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240814075431.339209-3-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, QEMU always constructs a all-zero CPUID entry for
CPUID[0xD 0x3f].
It's meaningless to construct such a leaf as the end of leaf 0xD. Rework
the logic of how subleaves of 0xD are constructed to get rid of such
all-zero value of subleaf 0x3f.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240814075431.339209-2-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing in LoongArch fw_cfg.c requires target specific definitions.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-3-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-2-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Variable env->cf[i] is defined as bool type, it is treated as int type
with shift operation. However the max possible width is 56 for the shift
operation, exceeding the width of int type. And there is existing api
read_fcc() which is converted to u64 type with bitwise shift, it can be
used to dump fp registers into coredump note segment.
Resolves: Coverity CID 1561133
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240914064645.2099169-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
ACPI ged is used for power management on LoongArch virt platform, in
general it is parsed from acpi table. However if system boot directly from
elf kernel, no UEFI bios is provided and acpi table cannot be used also.
Here acpi ged pm register is exposed with FDT table, it is compatbile
with syscon method in FDT table, only that acpi ged pm register is accessed
with 8-bit mode, rather with 32-bit mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240918014206.2165821-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Macro definition is added for acpi sleep control register, ged emulation
driver can use the macro , also it can be used in FDT table if ged is
exposed with FDT table.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240918014206.2165821-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
mips_cpu_create_with_clock() creates a vCPU. Pass it the vCPU
endianness requested by argument. Update the board call sites.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-17-philmd@linaro.org>
Have the CPS expose a 'cpu-big-endian' property so it can
set it to the vCPUs it creates.
Note, since the number of vCPUs created is dynamic, we can
not use QOM aliases.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-16-philmd@linaro.org>
Add the "big-endian" property and set the CP0C0_BE bit in CP0_Config0.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-15-philmd@linaro.org>
Directly use tcg_constant_tl() for constant integer, this
save a call to tcg_gen_movi_tl(), often saving a temp register.
Most of the places found using the following Coccinelle spatch script:
@@
identifier tmp;
constant val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_tl(tmp, val);
@@
identifier tmp;
int val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_i64(tmp, val);
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-2-philmd@linaro.org>
Replace tcg_gen_movi_tl() + gen_op_addr_add() by a single
gen_op_addr_addi() call.
gen_op_addr_addi() calls tcg_gen_addi_tl() which might
optimize if the immediate is zero.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-13-philmd@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-12-philmd@linaro.org>
Introduce mo_endian() which returns the endian MemOp
corresponding to the vCPU DisasContext.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-10-philmd@linaro.org>
MEMOP_IDX() is unused since commit 948f88661c ("target/mips:
Use cpu_*_data_ra for msa load/store"), remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241014232235.51988-1-philmd@linaro.org>
In commit 6d0cad1259 ("target/mips: Finish conversion to
tcg_gen_qemu_{ld,st}_*") we renamed the argument of the user
definition. Rename the system part for coherency. Since the
argument is ignored, prefix with 'ignored_'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-9-philmd@linaro.org>
Extract the implicit MO_TE definition in order to replace
it by runtime variable in the next commit.
Mechanical change using:
$ for n in UW UL UQ UO SW SL SQ; do \
sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
$(git grep -l MO_TE$n target/mips); \
done
manually remove superfluous parenthesis in nanoMIPS gen_save().
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-8-philmd@linaro.org>
Instead of swapping the reversed target endianness
using MO_BSWAP, directly return the correct endianness.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-7-philmd@linaro.org>
Functions are easier to rework than macros. Besides,
there is no gain here in inlining these.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-6-philmd@linaro.org>
Replace compile-time MO_TE evaluation by runtime mo_endian_env()
one, which expand target endianness from vCPU env.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-5-philmd@linaro.org>
Introduce mo_endian_env() which returns the endian
MemOp corresponding to the vCPU env.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-4-philmd@linaro.org>
Methods using the 'cpu_' prefix usually take a (Arch)CPUState
argument. Since this method takes a DisasContext argument,
rename it as disas_is_bigendian().
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-3-philmd@linaro.org>
In order to re-use cpu_is_bigendian(), declare it on "internal.h"
after renaming it as mips_env_is_bigendian().
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-2-philmd@linaro.org>
Move code evaluation from preprocessor to compiler so
both if() ladders are processed. Mostly style change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240930073450.33195-8-philmd@linaro.org>
Directly use tcg_constant_tl() for constant integer,
this save a call to tcg_gen_movi_tl() and a temp register.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-4-philmd@linaro.org>
Directly use tcg_constant_tl() for constant integer,
this save a call to tcg_gen_movi_tl().
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-3-philmd@linaro.org>
The TriCore architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/tricore/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-15-philmd@linaro.org>
