This addresses the py311-yaml -> py311-pyyaml rename in FreeBSD.
The change to the OpenSUSE dockerfile is something that will allow
QEMU to access rust bindgen in future.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241014130255.10119-1-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the defaults for --enable-rust ($rust in configure) and Meson's rust
option are out of sync, incremental builds will pick Meson's default.
This happens because, on an incremental build, configure does not run
Meson, Make does instead. Meson then gets the command line options
from either coredata.dat (which has everything cached in Python's pickle
format) or cmd_line.txt (slow path when Meson version is upgraded), but
neither knows about the rust option, and the meson_options.txt default
is used.
This will cause have_rust to be true if rustc is available; and the build
to fail because configure did not put a RUST_TARGET_TRIPLE in config-host.mak.
When in the Rust pull request I changed the $rust default from auto
to disabled, I should have made the same change to meson_options.txt;
do it now.
Cc: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241014110113.173946-1-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A working native Rust compiler is always needed in order to compile Rust
code, even when cross compiling, in order to build the procedural macros
that QEMU uses.
Right now, the check is done in rust/qemu-api-macros/meson.build, but this
has two disadvantages. First, it makes the build fail when the Meson "rust"
option is set to "auto" (instead, Rust support should be disabled). Second,
add_languages() is one of the few functions that are executed even by
"meson introspect", except that "meson introspect" executes both branches
of "if" statements! Therefore, "meson introspect" tries to look for a
Rust compiler even if the option is disabled---and then fails because
the compiler is required by rust/qemu-api-macros/meson.build. This is
visible for example if the compilation host has a stale
scripts/meson-buildoptions.sh and no rustc installed.
Both issues can be fixed by moving the check to the main meson.build,
together with the check for the cross compiler.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to its man page [1], pw_context_connect() sets errno on
failure:
Returns a Core on success or NULL with errno set on error.
It may be handy to see errno when figuring out why PipeWire
failed to connect. That leaves us with just one possible path to
reach 'fail_error' label which is then moved to that path and
also its error message is adjusted slightly.
1: https://docs.pipewire.org/group__pw__core.html#ga5994e3a54e4ec718094ca02a1234815b
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <3a78811ad5b0e87816b7616ab21d2eeef00b9c52.1726647033.git.mprivozn@redhat.com>
Only check we eventually get a shared memory scanout.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-20-marcandre.lureau@redhat.com>
Use a common shareable type for win32 & unix, and helper functions.
This simplify the code as it avoids a lot of #ifdef'ery.
Note: if it helps review, commits could be reordered to introduce the
common type before introducing shareable memory for unix.
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-19-marcandre.lureau@redhat.com>
Similar to what was done in commit 9462ff46 ("virtio-gpu/win32: allocate
shareable 2d resources/images") for win32, allocate resource memory with
memfd, so the associated display surface memory can be shared with a
different process.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-18-marcandre.lureau@redhat.com>
There are no types specific to Windows, so the code compiles on other
platforms, but its useless on !Windows.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-15-marcandre.lureau@redhat.com>
gio.pc variable is a bit bogus in context of cross-compilation, since it
contains an absolute path, relative to the sysroot directory. On Fedora, it ends
up as:
/usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig/usr/bin/gdbus-codegen
path which does not exist because it is not shipped by Fedora mingw
packages.
Instead, we can rely on meson find_program() behaviour to do a better
job based on its search order and capabilities.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-14-marcandre.lureau@redhat.com>
Use qemu_memfd_alloc() to allocate the display surface memory, which
will fallback on tmpfile/mmap() on systems without memfd, and allow to
share the display with other processes.
This is similar to how display memory is allocated on win32 since commit
09b4c198 ("console/win32: allocate shareable display surface").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-13-marcandre.lureau@redhat.com>
This is an arbitrary limitation that doesn't concern QEMU directly and
may make some use cases unnecessarily more complicated.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-11-marcandre.lureau@redhat.com>
Filtering pending messages when a new scanout is given shouldn't discard
pending cursor changes, for example.
Since filtering happens in a different thread, use atomic set/get.
Fixes: fa88b85dea ("ui/dbus: filter out pending messages when scanout")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-6-marcandre.lureau@redhat.com>
DisplaySurface may be free before the pixman image is freed, since the
image is refcounted and used by different objects, including pending
dbus messages.
Furthermore, setting the destroy function in
create_displaysurface_from() isn't appropriate, as it may not be used,
and may be overriden as in ramfb.
Set the destroy function when the shared handle is set, use the HANDLE
directly for destroy data, using a single common helper
qemu_pixman_win32_image_destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-5-marcandre.lureau@redhat.com>
A filter function that wants to drop a message should return NULL, in
which case it must also unref the message itself.
Fixes: fa88b85de ("ui/dbus: filter out pending messages when scanout")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-4-marcandre.lureau@redhat.com>
When SET_STREAM_FORMAT is called, we should clear the existing setup.
Factor out common function to close a stream.
Direct leak of 144 byte(s) in 3 object(s) allocated from:
#0 0x7f91d38f7350 in calloc (/lib64/libasan.so.8+0xf7350) (BuildId: a4ad7eb954b390cf00f07fa10952988a41d9fc7a)
#1 0x7f91d2ab7871 in g_malloc0 (/lib64/libglib-2.0.so.0+0x64871) (BuildId: 36b60dbd02e796145a982d0151ce37202ec05649)
#2 0x562fa2f447ee in timer_new_full /home/elmarco/src/qemu/include/qemu/timer.h:538
#3 0x562fa2f4486f in timer_new /home/elmarco/src/qemu/include/qemu/timer.h:559
#4 0x562fa2f448a9 in timer_new_ns /home/elmarco/src/qemu/include/qemu/timer.h:577
#5 0x562fa2f47955 in hda_audio_setup ../hw/audio/hda-codec.c:490
#6 0x562fa2f4897e in hda_audio_command ../hw/audio/hda-codec.c:605
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-3-marcandre.lureau@redhat.com>
Now that we have the MemOp for the access, we can order
the alignment fault caused by memory type before the
permission fault for the page.
For subsequent page hits, permission and stage 2 checks
are known to pass, and so the TLB_CHECK_ALIGNED fault
raised in generic code is not mis-ordered.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the tlb_fill_align hook. Handle alignment not due to
memory type, since that's no longer handled by generic code.
Pass memop to get_phys_addr.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Determine cache attributes, and thence Device vs Normal memory,
earlier in the function. We have an existing regime_is_stage2
if block into which this can be slotted.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the value through from get_phys_addr_nogpc.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass memop through get_phys_addr_twostage with its
recursion with get_phys_addr_nogpc.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Zero is the safe do-nothing value for callers to use.
Pass the value through from get_phys_addr_gpc and
get_phys_addr_with_space_nogpc.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Zero is the safe do-nothing value for callers to use.
Pass the value through from get_phys_addr.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Zero is the safe do-nothing value for callers to use.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Zero is the safe do-nothing value for callers to use.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert hppa_cpu_tlb_fill to hppa_cpu_tlb_fill_align so that we
can recognize alignment exceptions in the correct priority order.
Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=219339
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In Chapter 5, Interruptions, the group 3 exceptions lists
"Unaligned data reference trap" has higher priority than
"Data memory break trap".
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Drop the 'else' so that ret is overridden with the
highest priority fault.
Fixes: d8bc138125 ("target/hppa: Implement PSW_X")
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In Chapter 5, Interruptions, the group 3 exceptions lists
"Data memory access rights trap" in priority order ahead of
"Data memory protection ID trap".
Swap these checks in hppa_get_physical_address.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just add the argument, unused at this point.
Zero is the safe do-nothing value for all callers.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When we have a tlb miss, defer the alignment check to
the new tlb_fill_align hook. Move the existing alignment
check so that we only perform it with a tlb hit.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new callback to handle softmmu paging. Return the page
details directly, instead of passing them indirectly to
tlb_set_page. Handle alignment simultaneously with paging so
that faults are handled with target-specific priority.
Route all calls of the two hooks through a tlb_fill_align
function local to cputlb.c.
As yet no targets implement the new hook.
As yet cputlb.c does not use the new alignment check.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out of mmu_lookup.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to use "memop_" prefix, like other functions
that operate on MemOp.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is specific to MemOp, not TCG in general.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There should be no "just in case"; the page is already
in the tlb, and known to be not readable.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 95b9c27c81 ("linux-user: Remove unused handle_vm86_fault")
a bunch of other "static inline" function are now unused, too. Clang
warns about such unused "static inline" functions in .c files, so the
build currently breaks when compiling with "--enable-werror". Remove
the unused functions to get it going again.
Fixes: 95b9c27c81 ("linux-user: Remove unused handle_vm86_fault")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-ID: <20241011161845.417342-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that orig_ax is exposed and GDB is happy, don't skip
test-proc-mappings.py on i386. In fact, it's broken only on
m68k now, so skip only this architecture.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240912093012.402366-6-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy XML files describing orig_ax from GDB and glue them with
CPUX86State.orig_ax.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240912093012.402366-5-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
i386 gdbstub handles both i386 and x86_64. Factor out two functions
for reading and writing registers without knowing their bitness.
While at it, simplify the TARGET_LONG_BITS == 32 case.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240912093012.402366-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The kernel uses orig_rax/orig_eax to store the syscall number before
a syscall. One can see this value in core dumps and ptrace.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240912093012.402366-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
