Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht'
and 'backing_height' as these commonly indicate the size of the
whole surface (e.g. guest's Xorg extended display). Then use
'width' and 'height' for sub region in there (e.g. guest's
scanouts).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
The primary guest scanout shows the booting screen right after reboot
but additional guest displays (i.e. max_ouptuts > 1) will keep displaying
the old frames until the guest virtio gpu driver gets initialized, which
could cause some confusion. A better way is to to replace the surface with
a place holder that tells the display is not active during the reset of
virtio-gpu device.
And to immediately update the surface with the place holder image after
the switch, displaychangelistener_gfx_switch needs to be called with
'update == TRUE' in dpy_gfx_replace_surface when the new surface is NULL.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230627224451.11739-1-dongwon.kim@intel.com>
Observed a wrong context is bound when changing the scanout mode.
To prevent problem, it is needed to make sure to bind the right
context in gtk_egl_set_scanout_mode/gtk_gl_area_set_scanout_mode
as well as unbind one in the end of gd_egl_update/gd_gl_area_update.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230628191504.17185-1-dongwon.kim@intel.com>
A wrong exit condition may lead to an infinite loop when inflating a
valid zlib buffer containing some extra bytes in the `inflate_buffer`
function. The bug only occurs post-authentication. Return the buffer
immediately if the end of the compressed data has been reached
(Z_STREAM_END).
Fixes: CVE-2023-3255
Fixes: 0bf41cab ("ui/vnc: clipboard support")
Reported-by: Kevin Denis <kevin.denis@synacktiv.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230704084210.101822-1-mcascell@redhat.com>
Add some ifdefs to avoid an unused function and unused variable.
Fixes: de1f8ce0ab ("ui/dbus: use shared D3D11 Texture2D when possible")
Co-developed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <336f7697-bcfa-1f5f-e411-6859815aa26c@eik.bme.hu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the client implements "org.qemu.Display1.Listener.Win32.D3d11" and
we are running on ANGLE/win32, share the scanout texture with the peer
process, and draw with ScanoutTexture2d/UpdateTexture2d methods.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-22-marcandre.lureau@redhat.com>
The following patch will get the underlying D3D11 Texture2D from the
virgl renderer scanout. Pass it along to the texture scanout callbacks
as a priliminary step, to simplify review.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-20-marcandre.lureau@redhat.com>
Check if ANGLE is being used with D3D backend.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-19-marcandre.lureau@redhat.com>
Enable usage of dbus,gl= on win32. At this point, the scanout texture is
read on the DisplaySurface memory, and the client is then updated with
the "2D" API (with shared memory if possible).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-16-marcandre.lureau@redhat.com>
Similar to egl_fb_read(), same limitations, but with extra arguments to
read a subset of the framebuffer. Used in following commits.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-15-marcandre.lureau@redhat.com>
Windows GL drivers are notoriously not very good. Otoh, ANGLE provides
rock solid GLES implementation on top of direct3d. We should recommend
it and default to ES when using EGL (users can easily override this if
necessary)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-14-marcandre.lureau@redhat.com>
Make GBM optional for EGL code, and enable the build for win32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-13-marcandre.lureau@redhat.com>
When the display surface has an associated HANDLE, we can duplicate it
to the client process and let it map the memory to avoid expensive copies.
Introduce two new win32-specific methods ScanoutMap and UpdateMap. The
first is used to inform the listener about the a shared map
availability, and the second for display updates.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-12-marcandre.lureau@redhat.com>
Introduce qemu_win32_map_alloc() and qemu_win32_map_free() to allocate
shared memory mapping. The handle can be used to share the mapping with
another process.
Teach qemu_create_displaysurface() to allocate shared memory. Following
patches will introduce other places for shared memory allocation.
Other patches for -display dbus will share the memory when possible with
the client, to avoid expensive memory copy between the processes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-10-marcandre.lureau@redhat.com>
This property is similar to ``org.freedesktop.DBus.Interfaces`` property
on the bus interface: it's an array of strings listing the extra
interfaces and capabilities available, in a convenient way.
Most interfaces are implicit, as they are required. For
``org/qemu/Display1_$id``, we can list the Keyboard And Mouse
interfaces. Those could be optional.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-9-marcandre.lureau@redhat.com>
D-Bus doesn't support fd-passing on Windows (AF_UNIX doesn't have
SCM_RIGHTS yet, but there are other means to share objects. I have
proposed various solutions upstream, but none seem fitting enough atm).
To make the "-display dbus" work on Windows, implement an alternative
D-Bus interface where all the 'h' (FDs) arguments are replaced with
'ay' (WSASocketW data), and sockets are passed to the other end via
WSADuplicateSocket().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-6-marcandre.lureau@redhat.com>
D-Bus on windows doesn't support fd-passing. Let's isolate the
fdlist-related code as a first step, before adding Windows support,
using another mechanism.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-4-marcandre.lureau@redhat.com>
eglMakeCurrent() returns 1/EGL_TRUE on success. This is not what the
callback expects, where 0 indicates success.
While at it, print the EGL error to ease debugging.
As with virgl_renderer_callbacks, the return value is now checked since
version >= 4:
7f09e6bf0c
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-3-marcandre.lureau@redhat.com>
It will be used from other units.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-2-marcandre.lureau@redhat.com>
Set vc->gfx.guest_fb.dmabuf to NULL to prevent any further access
to it after the dmabuf is released.
v2: move declaration of vc inside ifdef
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230627005316.5627-1-dongwon.kim@intel.com>
x and y offsets and width and height of the scanout texture
is not correctly configured in case guest scanout frame is
dmabuf.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-ID: <20230621213150.29573-1-dongwon.kim@intel.com>
So that clients making use of the DBus backend could
send touch events through the new org.qemu.Display1.Touch
interface
Signed-off-by: Bilal Elmoussaoui <belmouss@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230619095337.9899-3-belmouss@redhat.com>
To share code between the GTK and DBus UI bakcends
see the next commit for details
Signed-off-by: Bilal Elmoussaoui <belmouss@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230619095337.9899-2-belmouss@redhat.com>
When OpenGL is enabled, create only the OpenGL context, ignoring the SDL
renderer as it is unused anyway.
Signed-off-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230612091959.2983-1-quic_acaggian@quicinc.com>
libepoxy handles loading the function pointer and dispatching the call,
so you don't have to worry about it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230515132455.1025608-1-marcandre.lureau@redhat.com>
VNC may try to get the current cursor even when there are no consoles
and crashes. Simple reproducer is qemu with -nodefaults.
Fixes: (again)
https://gitlab.com/qemu-project/qemu/-/issues/1548
Fixes: commit 385ac97f8 ("ui: keep current cursor with QemuConsole")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230428154807.2143652-1-marcandre.lureau@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix the following Cocoa trivial warnings:
C compiler for the host machine: cc (clang 14.0.0 "Apple clang version 14.0.0 (clang-1400.0.29.202)")
Objective-C compiler for the host machine: clang (clang 14.0.0)
[100/334] Compiling Objective-C object libcommon.fa.p/net_vmnet-bridged.m.o
net/vmnet-bridged.m:40:31: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
static char* get_valid_ifnames()
^
void
[742/1436] Compiling Objective-C object libcommon.fa.p/ui_cocoa.m.o
ui/cocoa.m:1937:22: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
static int cocoa_main()
^
void
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230425192820.34063-1-philmd@linaro.org>
job may be NULL if queue->exit is true. Check
it before dereference job.
Fixes: f31f9c1080 ("vnc: add magic cookie to VncState")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's already confusing that we have two very similar functions for
wrapping the parse of a 64-bit unsigned value, differing mainly on
whether they permit leading '-'. Adjust the signature of parse_uint()
and parse_uint_full() to be like all of qemu_strto*(): put the result
parameter last, use the same types (uint64_t and unsigned long long
have the same width, but are not always the same type), and mark
endptr const (this latter change only affects the rare caller of
parse_uint). Adjust all callers in the tree.
While at it, note that since cutils.c already includes:
QEMU_BUILD_BUG_ON(sizeof(int64_t) != sizeof(long long));
we are guaranteed that the result of parse_uint* cannot exceed
UINT64_MAX (or the build would have failed), so we can drop
pre-existing dead comparisons in opts-visitor.c that were never false.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-8-eblake@redhat.com>
[eblake: Drop dead code spotted by Markus]
Signed-off-by: Eric Blake <eblake@redhat.com>
GTK3 provides the infrastructure to receive and process multi-touch
events through the "touch-event" signal and the GdkEventTouch type.
Make use of it to transpose events from the host to the guest.
This allows users of machines with hardware capable of receiving
multi-touch events to run guests that can also receive those events
and interpret them as gestures, when appropriate.
An example of this in action can be seen here:
https://fosstodon.org/@slp/109545849296546767
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230526112925.38794-7-slp@redhat.com>
Add helpers for generating Multi-touch events from the UI backends that
can be sent to the guest through a virtio-multitouch device.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230526112925.38794-6-slp@redhat.com>
Although not actually exploitable at the moment, a negative width/height
could make datasize wrap around and potentially lead to buffer overflow.
Since there is no reason a negative width/height is ever appropriate,
modify QEMUCursor struct and cursor_alloc prototype to accept uint16_t.
This protects us against accidentally introducing future bugs.
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Jacek Halon <jacek.halon@gmail.com>
Reported-by: Yair Mizrahi <yairh33@gmail.com>
Reported-by: Elsayed El-Refa'ei <e.elrefaei99@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230523163023.608121-1-mcascell@redhat.com>
Windows sends an extra left control key up/down input event for
every right alt key up/down input event for keyboards with
international layout. Since commit 830473455f ("ui/sdl2: fix
handling of AltGr key on Windows") QEMU uses a Windows low level
keyboard hook procedure to reliably filter out the special left
control key and to grab the keyboard on Windows.
The SDL2 version 2.0.16 introduced its own Windows low level
keyboard hook procedure to grab the keyboard. Windows calls this
callback before the QEMU keyboard hook procedure. This disables
the special left control key filter when the keyboard is grabbed.
To fix the problem, disable the SDL2 Windows low level keyboard
hook procedure.
Reported-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230418062823.5683-1-vr_qemu@t-online.de>
SDL doesn't grab Alt+F4 under Windows by default. Pressing Alt+F4 thus closes
the VM immediately without confirmation, possibly leading to data loss. Fix
this by always grabbing Alt+F4 on Windows hosts, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417192139.43263-3-shentey@gmail.com>
By default, SDL grabs Alt+Tab only in non-fullscreen mode. This causes Alt+Tab
to switch tasks on the host rather than in the VM in fullscreen mode while it
switches tasks in non-fullscreen mode in the VM. Fix this confusing behavior
by grabbing Alt+Tab in fullscreen mode, always causing tasks to be switched in
the VM.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417192139.43263-2-shentey@gmail.com>
Except SDL, display backends seem to fail at handing full scanout
geometry correctly. It would need some test/reproducer to actually check
it. In the meantime, fill some missing fields, and leave a FIXME.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230515132537.1026310-1-marcandre.lureau@redhat.com>
On Windows, we don't use the low-level GBM/EGL helpers (no dmabuf etc),
we can turn on GL area support for the rest of rendering.
(fwiw, GDK backend may be either WGL or EGL)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230515132527.1026064-1-marcandre.lureau@redhat.com>
commit 4814d3cbf ("ui/dbus: restrict opengl to gbm-enabled config")
assumes that whenever GBM is available, OpenGL is. This is not always
the case, let's further restrict opengl-related paths and fix some
compilation issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230515132348.1024663-1-marcandre.lureau@redhat.com>
Before sdl2_gl_update() is called, sdl2_gl_switch() may decide to
destroy the console window and its associated shaders.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1644
Fixes: c84ab0a500 ("ui/console: optionally update after gfx switch")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20230511074217.4171842-1-marcandre.lureau@redhat.com>
vc->gfx.w and vc->gfx.h are not updated appropriately in this code path,
which leads to a different scaling factor for rendering the cursor on
some edge cases (e.g. the focus has left and re-entered the gtk window).
This can be reproduced using vhost-user-gpu with the gtk ui on the x11
backend.
Use the surface dimensions which are already updated accordingly.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230320160856.364319-2-ernunes@redhat.com>
The gd_motion_event size has some calculations for the cursor position,
which also take into account things like different size of the
framebuffer compared to the window size.
The use of window size makes things more difficult though, as at least
in the case of Wayland includes the size of ui elements like a menu bar
at the top of the window. This leads to a wrong position calculation by
a few pixels.
Fix it by using the size of the widget, which already returns the size
of the actual space to render the framebuffer.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20230320160856.364319-1-ernunes@redhat.com>
The dmabuf->y0_top flag is passed to .dpy_gl_scanout_dmabuf(), however
in the gtk ui both implementations dropped it when doing the next
scanout_texture call.
Fixes flipped linux console using vhost-user-gpu with the gtk ui
display.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230220175605.43759-1-ernunes@redhat.com>
By using a subproject, our own meson.build can use variables from
the subproject instead of hard-coded paths. This is also the first step
towards managing downloads with .wrap files instead of submodule.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we take a PNG screenshot the ordering of the colour channels in
the data is not correct, resulting in the image having weird
colouring compared to the actual display. (Specifically, on a
little-endian host the blue and red channels are swapped; on
big-endian everything is wrong.)
This happens because the pixman idea of the pixel data and the libpng
idea differ. PIXMAN_a8r8g8b8 defines that pixels are 32-bit values,
with A in bits 24-31, R in bits 16-23, G in bits 8-15 and B in bits
0-7. This means that on little-endian systems the bytes in memory
are
B G R A
and on big-endian systems they are
A R G B
libpng, on the other hand, thinks of pixels as being a series of
values for each channel, so its format PNG_COLOR_TYPE_RGB_ALPHA
always wants bytes in the order
R G B A
This isn't the same as the pixman order for either big or little
endian hosts.
The alpha channel is also unnecessary bulk in the output PNG file,
because there is no alpha information in a screenshot.
To handle the endianness issue, we already define in ui/qemu-pixman.h
various PIXMAN_BE_* and PIXMAN_LE_* values that give consistent
byte-order pixel channel formats. So we can use PIXMAN_BE_r8g8b8 and
PNG_COLOR_TYPE_RGB, which both have an in-memory byte order of
R G B
and 3 bytes per pixel.
(PPM format screenshots get this right; they already use the
PIXMAN_BE_r8g8b8 format.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1622
Fixes: 9a0a119a38 ("Added parameter to take screenshot with screendump as PNG")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230502135548.2451309-1-peter.maydell@linaro.org
It has nothing to do with migration, except for the "migrate" in the
name of the command. Move it with the rest of the ui commands.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
If hostlen is zero, there is a possibility that addrstr[hostlen - 1]
underflows and, if a closing bracked is there, hostlen - 2 is passed
to g_strndup() on the next line. If websocket==false then
addrstr[0] would be a colon, but if websocket==true this could in
principle happen.
Fix it by checking hostlen.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This workaround was put in place in the original implementation almost
10 years ago, considering a very old SDL2 version. Currently it prevents
users to run in a wayland-only environment without manually forcing the
backend.
The SDL2 wayland backend has been supported by distributions for a very
long time (e.g. in Fedora, first available 8 years ago), and is now
considered stable and becoming the default for new SDL2 releases.
Instead of requiring the x11 backend to exist by default, let new qemu
releases run with the default chosen by the installed SDL2 version.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230301141205.514338-1-ernunes@redhat.com>
VNC code relies on con==NULL to mean the default console.
Fixes:
https://gitlab.com/qemu-project/qemu/-/issues/1548
Fixes: commit 385ac97f8 ("ui: keep current cursor with QemuConsole")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reported-by: Helge Konetzka <hk@zapateado.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230319111017.1319880-1-marcandre.lureau@redhat.com>
Do not attempt to move the pointer if the widget is not yet realized.
The mouse cursor is placed to the corner of the screen, on X11 at least,
as x_root and y_root are then miscalculated. (this is not reproducible
on Wayland, because Gtk doesn't implement device warping there)
This also fixes the following warning at start:
qemu: Gdk: gdk_window_get_root_coords: assertion 'GDK_IS_WINDOW (window)' failed
Fixes: 6effaa16ac ("ui: set cursor position upon listener
registration")
Reported-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230320132624.1612464-1-marcandre.lureau@redhat.com>
-display dbus is not currently available to win32 users, so it's not
considered a regression.
Note also the close() leak fix in case of error.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230320133643.1618437-4-marcandre.lureau@redhat.com>
To be able to use the function keys F13 to F24 these should be defined in de keycodemapdb and added to the qapi.
The keycodemapdb is updated in its own repository, this patch enables the use of those keys within qemu.
Signed-off-by: Willem van de Velde <williamvdvelde@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We can enable EGL later for non-GBM hosts.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow to build & use the DBus display without 3d/GPU acceleration support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Future patches will introduce EGL support on win32 (too late for 8.0
though). Having a common place for EGL initialization and error handling
will make it simpler.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-display sdl,gl=es didn't actually use OpenGL ES.
Using OpenGL ES allows to use ANGLE, which works generally better than
Windows/OEM OpenGL driver.
(note: users can still bypass the QEMU choice with SDL_RENDER_DRIVER
environment variable)
(note: for some reason, specifying a driver disables batching and
breaks rendering, so enable it explicitly)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enable SDL logging when QEMU_ENABLE_SDL_LOGGING variable is set, as
suggested by Sam Lantinga, upstream SDL maintainer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
ANGLE fails to compile shaders otherwise.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no guarantee to have a current GL context here. The current
code seems to rely on the renderer using a GL backend, and to set a
current GL context. But this is not always the case, for example if the
renderer backend is DirectX.
This change is enough to fix using virgl with sdl2 on win32, on my setup.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Keeping the current cursor around is useful, not only for VNC, but for
other displays. Let's move it down, see the following patches for other
usages.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The naming is more conventional in QEMU code, and allows to simplify
some code by changing the API design, so it returns the input parameter,
instead of void.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The naming is more conventional in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's simply by luck that dbus-display header is built first before the
other units using it.
With sourceset, I can't find an easier way out than declaring an extra
dependency for dbus-display1 generate code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes unregistration with p2p connections, since they don't have an
associated name owner.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Or else, we may randomly destroy some textures..
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This fixes pressed keys being stuck when the deck is clicked and the
window loses focus.
In the past, Gustavo Noronha Silva also had a patch to fix this issue
though it only ungrabs mouse and does not release keys, and depends on
another out-of-tree patch:
e906a80147
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230228070946.12370-1-akihiko.odaki@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
While mouse is grabbed, window title contains a hint for the user what
keyboard keys to press to release the mouse. Make that hint text a bit
more user friendly for a Mac user:
- Replace "Ctrl" and "Alt" by appropriate symbols for those keyboard
keys typically displayed for them on a Mac (encode those symbols by
using UTF-8 characters).
- Drop " + " in between the keys, as that's not common on macOS for
documenting keyboard shortcuts.
- Convert lower case "g" to upper case "G", as that's common on macOS.
- Add one additional space at start and end of key stroke set, to
visually separate the key strokes from the rest of the text.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <E1pAClj-0003Jo-OB@lizzy.crudebyte.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This has been replaced by the 'password-secret' option,
which references a 'secret' object instance.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Include it in the .c files instead that use the error reporting
functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tracked down with the help of scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
qemu/coroutine.h and qemu/lockable.h include each other.
They need each other only in macro expansions, so we could simply drop
both inclusions to break the loop, and add suitable includes to files
that expand the macros.
Instead, move a part of qemu/coroutine.h to new qemu/coroutine-core.h
so that qemu/coroutine-core.h doesn't need qemu/lockable.h, and
qemu/lockable.h only needs qemu/coroutine-core.h. Result:
qemu/coroutine.h includes qemu/lockable.h includes
qemu/coroutine-core.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221131435.3851212-5-armbru@redhat.com>
[Semantic rebase conflict with 7c10cb38cc "accel/tcg: Add debuginfo
support" resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230109190321.1056914-18-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230109190321.1056914-17-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
hmp_mouse_set() doesn't bail out when it can't find a mouse.
Harmless, since qemu_input_check_mode_change() should be a no-op then.
Clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230109190321.1056914-16-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Transform
if (good) {
do stuff
} else {
handle error
}
to
if (!good) {
handle error
return;
}
do stuff
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109190321.1056914-15-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109190321.1056914-14-armbru@redhat.com>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "Graphics".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109190321.1056914-12-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109190321.1056914-11-armbru@redhat.com>
This moves these commands from MAINTAINERS section "QMP" to
"Graphics".
Command add-client applies to socket character devices in addition to
display devices. Move it anyway. Aside: the way @protocol character
device IDs and display types is bad design.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109190321.1056914-10-armbru@redhat.com>
SPICE_NEEDS_SET_MM_TIME is now always off. Bury the dead code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230109190321.1056914-7-armbru@redhat.com>
Version 0.14.0 is now old enough to have made it into the major
distributions:
Debian 11: 0.14.3
RHEL-8: 0.14.2
FreeBSD (ports): 0.14.4
Fedora 35: 0.14.0
Ubuntu 20.04: 0.14.0
OpenSUSE Leap 15.3: 0.14.3
Requiring it lets us drop two version checks in ui/vdagent.c. It also
enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230109190321.1056914-4-armbru@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----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=JJjG
-----END PGP SIGNATURE-----
Merge tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru into staging
Miscellaneous patches for 2022-12-14
# gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru:
ppc4xx_sdram: Simplify sdram_ddr_size() to return
block/vmdk: Simplify vmdk_co_create() to return directly
cleanup: Tweak and re-run return_directly.cocci
io: Tidy up fat-fingered parameter name
qapi: Use returned bool to check for failure (again)
sockets: Use ERRP_GUARD() where obviously appropriate
qemu-config: Use ERRP_GUARD() where obviously appropriate
qemu-config: Make config_parse_qdict() return bool
monitor: Use ERRP_GUARD() in monitor_init()
monitor: Simplify monitor_fd_param()'s error handling
error: Move ERRP_GUARD() to the beginning of the function
error: Drop a few superfluous ERRP_GUARD()
error: Drop some obviously superfluous error_propagate()
Drop more useless casts from void * to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/ui.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221104160712.3005652-28-armbru@redhat.com>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/block*.json.
Said commit explains the transformation in more detail.
There is one instance of the invariant violation mentioned there:
qcow2_signal_corruption() passes false, "" when node_name is an empty
string. Take care to pass NULL then.
The previous two commits cleaned up two more.
Additionally, helper bdrv_latency_histogram_stats() loses its output
parameters and returns a value instead.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-11-armbru@redhat.com>
[Fixes for #ifndef LIBRBD_SUPPORTS_ENCRYPTION and MacOS squashed in]
include/qapi/error.h on ERRP_GUARD():
* It must be used when the function dereferences @errp or passes
* @errp to error_prepend(), error_vprepend(), or error_append_hint().
* It is safe to use even when it's not needed, but please avoid
* cluttering the source with useless code.
Clean up some of this clutter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-3-armbru@redhat.com>
A warning, "qemu: warning: console: no gl-unblock within" followed by
guest scanout lockup can happen if dpy_gl_update is called in a row
and the second call is made before gd_draw_event scheduled by the first
call is taking place. This is because draw call returns without decrementing
gl_block ref count if the dmabuf was already submitted as shown below.
(gd_gl_area_draw/gd_egl_draw)
if (dmabuf) {
if (!dmabuf->draw_submitted) {
return;
} else {
dmabuf->draw_submitted = false;
}
}
So it should not schedule any redundant draw event in case draw_submitted is
already set in gd_egl_fluch/gd_gl_area_scanout_flush.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221021192315.9110-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GTK Clipboard implementation may cause guest hangs.
Therefore implement new configure switch: --enable-gtk-clipboard,
as a meson option disabled by default, which warns in the help
text about the experimental nature of the feature.
Regenerate the meson build options to include it.
The initialization of the clipboard is gtk.c, as well as the
compilation of gtk-clipboard.c are now conditional on this new
option to be set.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1150
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Message-Id: <20221121135538.14625-1-cfontana@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <9a0d0718aafaa52029fad76a149f3200b6bba0dd.1666707782.git.amarjargal16@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
improve error handling during module load, by changing:
bool module_load(const char *prefix, const char *lib_name);
void module_load_qom(const char *type);
to:
int module_load(const char *prefix, const char *name, Error **errp);
int module_load_qom(const char *type, Error **errp);
where the return value is:
-1 on module load error, and errp is set with the error
0 on module or one of its dependencies are not installed
1 on module load success
2 on module load success (module already loaded or built-in)
module_load_qom_one has been introduced in:
commit 28457744c3 ("module: qom module support"), which built on top of
module_load_one, but discarded the bool return value. Restore it.
Adapt all callers to emit errors, or ignore them, or fail hard,
as appropriate in each context.
Replace the previous emission of errors via fprintf in _some_ error
conditions with Error and error_report, so as to emit to the appropriate
target.
A memory leak is also fixed as part of the module_load changes.
audio: when attempting to load an audio module, report module load errors.
Note that still for some callers, a single issue may generate multiple
error reports, and this could be improved further.
Regarding the audio code itself, audio_add() seems to ignore errors,
and this should probably be improved.
block: when attempting to load a block module, report module load errors.
For the code paths that already use the Error API, take advantage of those
to report module load errors into the Error parameter.
For the other code paths, we currently emit the error, but this could be
improved further by adding Error parameters to all possible code paths.
console: when attempting to load a display module, report module load errors.
qdev: when creating a new qdev Device object (DeviceState), report load errors.
If a module cannot be loaded to create that device, now abort execution
(if no CONFIG_MODULE) or exit (if CONFIG_MODULE).
qom/object.c: when initializing a QOM object, or looking up class_by_name,
report module load errors.
qtest: when processing the "module_load" qtest command, report errors
in the load of the module.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929093035.4231-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 8f9abdf586 ("chardev: src buffer const for write functions")
changed the type of the second parameter of qemu_chr_be_write()
from uint8_t * to const uint8_t *. Remove the now useless type
casts from qemu_chr_be_write() function calls in ui/console.c and
ui/gtk.c.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20221022141204.29358-1-vr_qemu@t-online.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These memory allocation functions return void *, and casting to
another pointer type is useless clutter. Drop these casts.
If you really want another pointer type, consider g_new().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220923120025.448759-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The patch adds "show_menubar" command line option for GTK UI similar to
"show_tabs". This option allows to hide menu bar initially, it still can
be toggled by shortcut and other shortcuts still work.
Signed-off-by: Bryce Mills <brycemills@proton.me>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <NWO_zx1CT5Aj9vAXsRlqBppXd63gcKwL9V1qM1Meh36M_9tCw-EsCnfpvONXhHjmtKIUoSuCy9OO6cHS7M8b0oHBOCZG6f1jZ4Q2tqgI2Qo=@proton.me>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Although the grab menu item represents the tabbed displays, the old
implicit mouse ungrabbing logic changes the grab menu item even for
an untabbed display.
Leave the grab menu item when implicitly ungrabbing mouse for an
untabbed display. The new ungrabbing logic introduced in
gd_mouse_mode_change() strictly follows the corresponding grabbing
logic found in gd_button_event().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221008140116.11473-1-akihiko.odaki@daynix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A thread often fails to bind an egl context to itself after guest VM is
rebooted because the context is still owned by another thread. It is not
very clear what condition makes this happen but this can be prevented
by unbinding the context from the thread in the end of gd_egl_switch.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20220928215805.4661-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Extended ClientCutText messages start with a 4-byte header. If len < 4,
an integer underflow occurs in vnc_client_cut_text_ext. The result is
used to decompress data in a while loop in inflate_buffer, leading to
CPU consumption and denial of service. Prevent this by checking dlen in
protocol_client_msg.
Fixes: CVE-2022-3165
Fixes: 0bf41cab93 ("ui/vnc: clipboard support")
Reported-by: TangPeng <tangpeng@qianxin.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Message-Id: <20220925204511.1103214-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While the source directory is always included in the include path,
the corresponding directory in the build tree is not. Therefore,
custom_targets (e.g. ui/dbus-display1.h) must be referred to using
the full path.
This avoids a build failure when ui/dbus-chardev.c is not built as
a module:
In file included from ../ui/dbus-chardev.c:32:
../ui/dbus.h:34:10: fatal error: dbus-display1.h: No such file or directory
34 | #include "dbus-display1.h"
| ^~~~~~~~~~~~~~~~~
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The png_destroy_write_struct() function frees all memory used by
libpng. Don't use the glib auto cleanup mechanism to free the
memory allocated by libpng again. For the pixman image, use only the
auto cleanup mechanism and remove the qemu_pixman_image_unref()
function call to prevent another double free.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1210
Fixes: 9a0a119a38 ("Added parameter to take screenshot with screendump as PNG")
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220919061956.30929-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In order to reset the guest agent, we send CLOSED & OPENED events.
They are correctly received by the guest kernel. However, they might not
be noticed by the guest agent process, as the IO task (poll() for
example) might be wake up after both CLOSED & OPENED have been
processed.
Wait until the guest agent is disconnected to re-open our side.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220912102455.111765-6-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not only we have to reset the vdagent clipboards serial state, but also
the current QEMU clipboards info serial (the value is currently used by
qemu_clipboard_check_serial, only used by -display dbus).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220912102455.111765-5-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The guest agent doesn't know what is the current serial state. Reset the
serial value whenever a new agent connection is established.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=2124446
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220912102455.111765-4-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The incoming grab event should have a higher serial.
See also "vdagent: introduce VD_AGENT_CAP_CLIPBOARD_GRAB_SERIAL":
045a6978d6
This is only a relevant fix for the -display dbus, only user of that
function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220912102455.111765-3-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This work is based on:
https://patchew.org/QEMU/20220317125534.38706-1-philippe.mathieu.daude@gmail.com/
Simplify the initialization dance by running qemu_init() in the main
thread before the Cocoa event loop starts. The secondary thread only
runs only qemu_main_loop() and qemu_cleanup().
This fixes a case where addRemovableDevicesMenuItems() calls
qmp_query_block() while expecting the main thread to still hold
the BQL.
Overriding the code after calling qemu_init() is done by dynamically
replacing a function pointer variable, qemu_main when initializing
ui/cocoa, which unifies the static implementation of main() for
builds with ui/cocoa and ones without ui/cocoa.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220819132756.74641-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Define a QEMU special key constant for the tab key and add an entry for
it in the qcode_to_keysym table. This allows tab completion to work again
in the SDL monitor virtual console, which has been broken ever since the
migration from SDL1 to SDL2.
Signed-off-by: Cal Peake <cp@absolutedigital.net>
Message-Id: <7054816e-99c-7e2-6737-7cf98cc56e2@absolutedigital.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use autofree heap allocation instead of variable-length
array on the stack.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-11-peter.maydell@linaro.org
The display may be corrupted when changing screen colour depth in
qemu-system-ppc/MacOS since 7.0.
Do not short-cut qemu_console_resize() if the surface is backed by vga
vram. When the scanout isn't set, or it is already allocated, or opengl,
and the size is fitting, we still avoid the reallocation & replace path.
Fixes: commit cb8962c1 ("ui: do not create a surface when resizing a GL scanout")
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220725115815.2461322-1-marcandre.lureau@redhat.com>
Some files wrongly contain the same word twice in a row.
One of them should be removed or replaced.
Message-Id: <20220722145859.1952732-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Without CONFIG_GBM, compiling dbus-display fails with
../ui/dbus.c: In function ‘dbus_create_context’:
../ui/dbus.c:47:20: error: ‘qemu_egl_rn_ctx’ undeclared (first use in this function); did you mean ‘qemu_egl_init_ctx’?
47 | qemu_egl_rn_ctx);
| ^~~~~~~~~~~~~~~
| qemu_egl_init_ctx
../ui/dbus.c:47:20: note: each undeclared identifier is reported only once for each function it appears in
and many other similar errors, because include/ui/egl-helpers.h only has
these declaration if gbm is found on the system.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1108
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The patch adds "show_tabs" command line option for GTK ui similar to
"grab_on_hover". This option allows tabbed view mode to not have to be
enabled by hand at each start of the VM.
Signed-off-by: Felix "xq" Queißner <xq@random-projects.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220712133753.18937-1-xq@random-projects.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The D-Bus connection starts processing messages before QEMU has the time
to set the object manager server. This is causing dbus-display-test to
fail randomly with:
ERROR:../tests/qtest/dbus-display-test.c:68:test_dbus_display_vm:
assertion failed
(qemu_dbus_display1_vm_get_name(QEMU_DBUS_DISPLAY1_VM(vm)) ==
"dbus-test"): (NULL == "dbus-test") ERROR
Use the delayed message processing flag and method to avoid that
situation.
(the bus connection doesn't need a fix, as the initialization is done
synchronously)
Reported-by: Robinson, Cole <crobinso@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <20220609152647.870373-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Retrieve the refresh rate of the display and reflect it with
dpy_set_ui_info() and update_displaychangelistener(), allowing the
guest and DisplayChangeListener to consume the information.
The information will be used as a hint how often the display should
be updated. For example, when we run 30 Hz physical display updates
it is pointless for the guest to update the screen at 60Hz
frequency, the guest can spare some work instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220702142519.12188-1-akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
I noticed this error while building QEMU on Mac OS X:
[1040/1660] Compiling Objective-C object libcommon.fa.p/ui_cocoa.m.o
../ui/cocoa.m:803:17: warning: variable 'switched_to_fullscreen' set but not used [-Wunused-but-set-variable]
static bool switched_to_fullscreen = false;
^
1 warning generated.
I think the behavior is fine if you remove "switched_to_fullscreen", I can
still switch in and out of mouse grabbed mode and fullscreen mode with this
change, and Command keycodes will only be passed to the guest if the mouse
is grabbed, which I think is the right behavior. I'm not sure why a static
piece of state was needed to handle that in the first place. Perhaps the
refactoring of the flags-state-change fixed that by toggling the Command
keycode on.
I tested this with an Ubuntu core image on macOS 12.4
wget https://cdimage.ubuntu.com/ubuntu-core/18/stable/current/ubuntu-core-18-i386.img.xz
xz -d ubuntu-core-18-i386.img.xz
qemu-system-x86_64 -drive file=ubuntu-core-18.i386.img,format=raw
Fixes: 6d73bb643a ("ui/cocoa: Clear modifiers whenever possible")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220702044304.90553-1-peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[-NSPasteboard dataForType:] returns an autoreleased NSString,
and callings its release method will result in double-free when
the global autorelease pool is released. Use NSAutoreleasePool to
release it properly.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220614212131.94696-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The update makes it easier to find and specify devices.
They can only be found by device type name without the id field,
for example, devices of the same type have the same label.
The update also adds a head field,
which is useful for devices that support multiple heads,
such as virtio-gpu.
Signed-off-by: Jianxian Wen <jianxian.wen@verisilicon.com>
Signed-off-by: Lu Gao <lu.gao@verisilicon.com>
Message-Id: <4C23C17B8E87E74E906A25A3254A03F4018FC045B0@SHASXM06.verisilicon.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Inspired by Julia Lawall's fixing of Linux
kernel comments, I looked at qemu, although I did it manually.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-2-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This change adds a new member, refresh_rate to QemuUIInfo in
include/ui/console.h. It represents the refresh rate of the
physical display backend, and it is more appropriate than
GUI update interval as the refresh rate which the emulated device
reports:
- sdl may set GUI update interval shorter than the refresh rate
of the physical display to respond to user-generated events.
- sdl and vnc aggressively changes GUI update interval, but
a guests is typically not designed to respond to frequent
refresh rate changes, or frequent "display mode" changes in
general. The frequency of refresh rate changes of the physical
display backend matches better to the guest's expectation.
QemuUIInfo also has other members representing "display mode",
which makes it suitable for refresh rate representation. It has
a throttling of update notifications, and prevents frequent changes
of the display mode.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-3-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since about 2018 virglrenderer (commit fa835b0f88 "vrend: don't
hardcode context version") tries to open the highest available GL
context version. This is done by creating the known GL context
versions from the highest to the lowest until (*create_gl_context)
returns a context != NULL.
This does not work properly with
the current QEMU gd_gl_area_create_context() function, because
gdk_gl_context_realize() on Wayland creates a version 3.0 legacy
context if the requested GL context version can't be created.
In order for virglrenderer to find the highest available GL
context version, return NULL if the created context version is
lower than the requested version.
This fixes the following error:
QEMU started with -device virtio-vga-gl -display gtk,gl=on.
Under Wayland, the guest window remains black and the following
information can be seen on the host.
gl_version 30 - compat profile
(qemu:5978): Gdk-WARNING **: 16:19:01.533:
gdk_gl_context_set_required_version
- GL context versions less than 3.2 are not supported.
(qemu:5978): Gdk-WARNING **: 16:19:01.537:
gdk_gl_context_set_required_version -
GL context versions less than 3.2 are not supported.
(qemu:5978): Gdk-WARNING **: 16:19:01.554:
gdk_gl_context_set_required_version -
GL context versions less than 3.2 are not supported.
vrend_renderer_fill_caps: Entering with stale GL error: 1282
To reproduce this error, an OpenGL driver is required on the host
that doesn't have the latest OpenGL extensions fully implemented.
An example for this is the Intel i965 driver on a Haswell processor.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220605085131.7711-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The counterpart function for gd_gl_area_create_context() is
currently empty. Implement the gd_gl_area_destroy_context()
function to avoid GL context leaks.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220605085131.7711-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The "-display sdl" option still uses a hand-crafted parser for its
parameters since we didn't want to drag an interface we considered
somewhat flawed into the QAPI schema. Since the flaws are gone now,
it's time to QAPIfy.
This introduces the new "DisplaySDL" QAPI struct that is used to hold
the parameters that are unique to the SDL display. The only specific
parameter is currently "grab-mod" that is used to specify the required
modifier keys to escape from the mouse grabbing mode.
Message-Id: <20220519155625.1414365-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently png support is dependent on vnc for linking object file to
libpng. This commit makes the parameter independent of vnc as it breaks
system emulator with --disable-vnc unless --disable-png is added.
Fixes: 9a0a119a38 ("Added parameter to take screenshot with screendump as PNG", 2022-04-27)
Signed-off-by: Kshitij Suri <kshitij.suri@nutanix.com>
Message-Id: <20220510161932.228481-1-kshitij.suri@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because qemu_co_queue_restart_all does not release the lock, it should
be used only in coroutine context. Introduce a new function that,
like qemu_co_enter_next, does release the lock, and use it whenever
qemu_co_queue_restart_all was used outside coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The call is POSIX-specific. Use the dedicated GLib API.
(this is a preliminary patch before renaming qemu_set_nonblock())
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add possibility to change addresses where VNC server listens for new
connections. Prior to 6.0 this functionality was available through
'change' qmp command which was deleted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220401143936.356460-3-vsementsov@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Let's use SocketAddressList instead of dynamic arrays.
Benefits:
- Automatic cleanup: don't need specific freeing function and drop
some gotos.
- Less indirection: no triple asterix anymore!
- Prepare for the following commit, which will reuse new interface of
vnc_display_listen().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220401143936.356460-2-vsementsov@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently screendump only supports PPM format, which is un-compressed. Added
a "format" parameter to QMP and HMP screendump command to support PNG image
capture using libpng.
QMP example usage:
{ "execute": "screendump", "arguments": { "filename": "/tmp/image",
"format":"png" } }
HMP example usage:
screendump /tmp/image -f png
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/718
Signed-off-by: Kshitij Suri <kshitij.suri@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220408071336.99839-3-kshitij.suri@nutanix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Libpng is only detected if VNC is enabled currently. This patch adds a
generalised png option in the meson build which is aimed to replace use of
CONFIG_VNC_PNG with CONFIG_PNG.
Signed-off-by: Kshitij Suri <kshitij.suri@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220408071336.99839-2-kshitij.suri@nutanix.com>
[ kraxel: add meson-buildoptions.sh updates ]
[ kraxel: fix centos8 testcase ]
[ kraxel: update --enable-vnc-png too ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
--enable-vnc-png fixup
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Users requiring FIPS support must build QEMU with either the libgcrypt
or gnutls libraries as the crytography backend.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'blockdev-change-medium' is a convinient wrapper for the following
sequence of commands:
* blockdev-open-tray
* blockdev-remove-medium
* blockdev-insert-medium
* blockdev-close-tray
and should be used f.e. to change ISO image inside the CD-ROM tray.
Though the guest could lock the tray and some linux guests like
CentOS 8.5 actually does that. In this case the execution if this
command results in the error like the following:
Device 'scsi0-0-1-0' is locked and force was not specified,
wait for tray to open and try again.
This situation is could be resolved 'blockdev-open-tray' by passing
flag 'force' inside. Thus is seems reasonable to add the same
capability for 'blockdev-change-medium' too.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Acked-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220412221846.280723-1-den@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Since it depends on monitor code, and error_vprintf_unless_qmp() is
already there.
This will help to move error-report in a common subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-31-marcandre.lureau@redhat.com>
Move qemu_main() declaration to a new header.
Simplify main.c since both cocoa & sdl cannot be enabled together.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-5-marcandre.lureau@redhat.com>
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
=rMle
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Add cpu0-id to query-sev-capabilities
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
# FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
# N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
# aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
# tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
# yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
# =rMle
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Apr 2022 10:31:44 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (53 commits)
target/i386: Remove unused XMMReg, YMMReg types and CPUState fields
target/i386: do not access beyond the low 128 bits of SSE registers
virtio-ccw: do not include headers for all virtio devices
virtio-ccw: move device type declarations to .c files
virtio-ccw: move vhost_ccw_scsi to a separate file
s390x: follow qdev tree to detect SCSI device on a CCW bus
hw: hyperv: Initial commit for Synthetic Debugging device
hyperv: Add support to process syndbg commands
hyperv: Add definitions for syndbg
hyperv: SControl is optional to enable SynIc
thread-posix: optimize qemu_sem_timedwait with zero timeout
thread-posix: implement Semaphore with QemuCond and QemuMutex
thread-posix: use monotonic clock for QemuCond and QemuSemaphore
thread-posix: remove the posix semaphore support
whpx: Added support for breakpoints and stepping
build-sys: simplify AF_VSOCK check
build-sys: drop ntddscsi.h check
Remove qemu-common.h include from most units
qga: remove explicit environ argument from exec/spawn
Move fcntl_setfl() to oslib-posix
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prevent potential integer overflow by limiting 'width' and 'height' to
512x512. Also change 'datasize' type to size_t. Refer to security
advisory https://starlabs.sg/advisories/22-4206/ for more information.
Fixes: CVE-2021-4206
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220407081712.345609-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without this change, The GL output of a console overwrites the
other consoles and makes them unusable.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220325161216.74582-1-akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Check the dirty bits in advance to avoid unnecessary memory operations.
In the case that guest surface has different format than the server,
but it does not have dirty bits which means no refresh is actually needed,
the memory operations is not necessary.
Signed-off-by: Jianxian Wen <jianxian.wen@verisilicon.com>
Signed-off-by: Lu Gao <lu.gao@verisilicon.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <4C23C17B8E87E74E906A25A3254A03F4FA22100C@SHASXM06.verisilicon.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK already produces corresponding GDK_BUTTON_PRESS events
alongside 2BUTTON and 3BUTTON_PRESS events. The 2BUTTON and
3BUTTON_PRESS events were incorrectly being interpreted and
passed to guests as button release events.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/558
Signed-off-by: K. Lange <klange@toaruos.org>
Message-Id: <20220305104521.3583703-1-klange@toaruos.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
-----BEGIN PGP SIGNATURE-----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=PLdU
-----END PGP SIGNATURE-----
Merge tag 'darwin-20220315' of https://github.com/philmd/qemu into staging
Darwin-based host patches
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
# gpg: Signature made Tue 15 Mar 2022 12:52:19 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'darwin-20220315' of https://github.com/philmd/qemu: (21 commits)
MAINTAINERS: Volunteer to maintain Darwin-based hosts support
ui/cocoa: add option to swap Option and Command
ui/cocoa: capture all keys and combos when mouse is grabbed
ui/cocoa: release mouse when user switches away from QEMU window
ui/cocoa: add option to disable left-command forwarding to guest
ui/cocoa: Constify qkeycode translation arrays
configure: Pass filtered QEMU_OBJCFLAGS to meson
meson: Log QEMU_CXXFLAGS content in summary
meson: Resolve the entitlement.sh script once for good
osdep: Avoid using Clang-specific __builtin_available()
audio: Rename coreaudio extension to use Objective-C compiler
coreaudio: Always return 0 in handle_voice_change
audio: Log context for audio bug
audio/dbus: Fix building with modules on macOS
audio/coreaudio: Remove a deprecation warning on macOS 12
block/file-posix: Remove a deprecation warning on macOS 12
hvf: Remove deprecated hv_vcpu_flush() calls
hvf: Make hvf_get_segments() / hvf_put_segments() local
hvf: Use standard CR0 and CR4 register definitions
tests/fp/berkeley-testfloat-3: Ignore ignored #pragma directives
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On Mac OS X the Option key maps to Alt and Command to Super/Meta. This change
swaps them around so that Alt is the key closer to the space bar and Meta/Super
is between Control and Alt, like on non-Mac keyboards.
It is a cocoa display option, disabled by default.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gustavo Noronha Silva <gustavo@noronha.dev.br>
Message-Id: <20210713213200.2547-3-gustavo@noronha.dev.br>
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220306121119.45631-3-akihiko.odaki@gmail.com>
Reviewed-by: Will Cohen <wwcohen@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Applications such as Gnome may use Alt-Tab and Super-Tab for different
purposes, some use Ctrl-arrows so we want to allow qemu to handle
everything when it captures the mouse/keyboard.
However, Mac OS handles some combos like Command-Tab and Ctrl-arrows
at an earlier part of the event handling chain, not letting qemu see it.
We add a global Event Tap that allows qemu to see all events when the
mouse is grabbed. Note that this requires additional permissions.
See:
https://developer.apple.com/documentation/coregraphics/1454426-cgeventtapcreate?language=objc#discussionhttps://support.apple.com/en-in/guide/mac-help/mh32356/mac
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gustavo Noronha Silva <gustavo@noronha.dev.br>
Message-Id: <20210713213200.2547-2-gustavo@noronha.dev.br>
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220306121119.45631-2-akihiko.odaki@gmail.com>
Reviewed-by: Will Cohen <wwcohen@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This resolves an issue where using command-tab to switch between QEMU
and other windows on the host can leave the mouse pointer visible.
By releasing the mouse when the user switches away, the user must left
click on the QEMU window when switching back in order to hide the
pointer and return control to the guest.
This appraoch ensures that the calls to NSCursor hide and unhide are
always balanced and thus work correctly when invoked.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When switching between guest and host on a Mac using command-tab the
command key is sent to the guest which can trigger functionality in the
guest OS. Specifying left-command-key=off disables forwarding this key
to the guest. Defaults to enabled.
Also updated the cocoa display documentation to reference the new
left-command-key option along with the existing show-cursor option.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
[PMD: Set QAPI structure @since tag to 7.0]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
egl-headless depends on the backing surface to be set before texture are
set and updated. Display it (update=true) iff the current scanout kind
is SURFACE.
Reported-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
gfx_switch() is called to set the new_surface, not necessarily to
display it. It should be displayed after gfx_update(). Send the whole
scanout only in this case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The DBus listener naively create, update and destroy textures without
taking into account other listeners. The texture were shared, but
texture update was unnecessarily duplicated.
Teach DisplayGLCtx to do optionally shared texture handling. This is
only implemented for DBus display at this point, however the same
infrastructure could potentially be used for other future combinations.
Reported-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
When switching to the dummy surface, we should also call gfx_update.
But when using GL, we shouldn't call it.
By making it an argument to displaychangelistener_gfx_switch(), it will
be explicit, and cannot be forgotten that easily.
Fixes: commit ebced091 ("console: save current scanout details")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Value of 0 for program and shaders are silently ignored and indicate error.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The current checks are done at registration time only. However, if a DCL
has no specific console specified, it may be switched dynamically with
console_select() later on.
Let's move the checks when displaychangelistener_display_console() is
called, which includes registration time and remains fatal if the
specified console is incompatible.
Note: we may want to display the compatibility error to the DCL, this is
left for a future improvement.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
DBusDisplayConsole is specific to a given QemuConsole.
Fixes: commit 142ca628 ("ui: add a D-Bus display backend")
Reported-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Fix a regression introduced by commit 5e79d516e ("ui: split the GL
context in a different object").
Reported-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
As expected from the "compatible_dcl" comment, a simple comparison of
ops isn't enough. The following patch will fix a regression introduced
by this limited check by extending the compatibility callback for
egl-headless.
For now, this patch simply replaces the the "compatible_dcl" ops pointer
with a "dpy_gl_ctx_is_compatible_ctx" callback.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This provides standard look and feel for the about panel and reduces
code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220227042241.1543-1-akihiko.odaki@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Services menu functionality of Cocoa is described at:
https://developer.apple.com/design/human-interface-guidelines/macos/extensions/services/
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214091320.51750-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The same info may be used to update the clipboard, and may be freed
before being ref'ed again.
Fixes: 70a54b0169 ("ui: avoid compiler warnings from unused clipboard info variable")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220214115917.1679568-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu_console_resize() will create a blank surface and replace the
current scanout with it if called while the current scanout is
GL (texture or dmabuf).
This is not only very costly, but also can produce glitches on the
display/listener side.
Instead, compare the current console size with the fitting console
functions, which also works when the scanout is GL.
Note: there might be still an unnecessary surface creation on calling
qemu_console_resize() when the size is actually changing, but display
backends currently rely on DisplaySurface details during
dpy_gfx_switch() to handle various resize aspects. We would need more
refactoring to handle resize without DisplaySurface, this is left for a
future improvement.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220214201337.1814787-4-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make surface_gl_create_texture() idempotent: if the surface is already
bound to a texture, do not create a new one.
This fixes texture leaks when there are multiple DBus listeners, for
example.
Reported-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220214201337.1814787-3-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The commit 7cc712e98 ("ui: dispatch GL events to all listener")
mechanically replaced the dpy_gl calls with a dispatch loop, using the
same pre-conditions. However, it didn't take into account that all
listeners do not have to implement the GL callbacks.
Add the missing pre-conditions before calling the callbacks.
Fix crash when running a GL-enabled VM with "-device virtio-gpu-gl-pci
-display egl-headless -vnc :0".
Fixes: 7cc712e98 ("ui: dispatch GL events to all listener")
Reported-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214201337.1814787-2-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In commit 6e657e64cd in 2013 we added some autorelease pools to
deal with complaints from macOS when we made calls into Cocoa from
threads that didn't have automatically created autorelease pools.
Later on, macOS got stricter about forbidding cross-thread Cocoa
calls, and in commit 5588840ff7 we restructured the code to
avoid them. This left the autorelease pool creation in several
functions without any purpose; delete it.
We still need the pool in cocoa_refresh() for the clipboard related
code which is called directly there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220224101330.967429-3-peter.maydell@linaro.org
The updateUIInfo method makes Cocoa API calls. It also calls back
into QEMU functions like dpy_set_ui_info(). To do this safely, we
need to follow two rules:
* Cocoa API calls are made on the Cocoa UI thread
* When calling back into QEMU we must hold the iothread lock
Fix the places where we got this wrong, by taking the iothread lock
while executing updateUIInfo, and moving the call in cocoa_switch()
inside the dispatch_async block.
Some of the Cocoa UI methods which call updateUIInfo are invoked as
part of the initial application startup, while we're still doing the
little cross-thread dance described in the comment just above
call_qemu_main(). This meant they were calling back into the QEMU UI
layer before we'd actually finished initializing our display and
registered the DisplayChangeListener, which isn't really valid. Once
updateUIInfo takes the iothread lock, we no longer get away with
this, because during this startup phase the iothread lock is held by
the QEMU main-loop thread which is waiting for us to finish our
display initialization. So we must suppress updateUIInfo until
applicationDidFinishLaunching allows the QEMU main-loop thread to
continue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220224101330.967429-2-peter.maydell@linaro.org
setAllowedFileTypes is deprecated in macOS 12.
Per Akihiko Odaki [*]:
An image file, which is being chosen by the panel, can be a
raw file and have a variety of file extensions and many are not
covered by the provided list (e.g. "udf"). Other platforms like
GTK can provide an option to open a file with an extension not
listed, but Cocoa can't. It forces the user to rename the file
to give an extension in the list. Moreover, Cocoa does not tell
which extensions are in the list so the user needs to read the
source code, which is pretty bad.
Since this code is harming the usability rather than improving it,
simply remove the [NSSavePanel allowedFileTypes:] call, fixing:
[2789/6622] Compiling Objective-C object libcommon.fa.p/ui_cocoa.m.o
ui/cocoa.m:1411:16: error: 'setAllowedFileTypes:' is deprecated: first deprecated in macOS 12.0 - Use -allowedContentTypes instead [-Werror,-Wdeprecated-declarations]
[openPanel setAllowedFileTypes: supportedImageFileTypes];
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/AppKit.framework/Headers/NSSavePanel.h:215:49: note: property 'allowedFileTypes' is declared deprecated here
@property (nullable, copy) NSArray<NSString *> *allowedFileTypes API_DEPRECATED("Use -allowedContentTypes instead", macos(10.3,12.0));
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/AppKit.framework/Headers/NSSavePanel.h:215:49: note: 'setAllowedFileTypes:' has been explicitly marked deprecated here
FAILED: libcommon.fa.p/ui_cocoa.m.o
[*] https://lore.kernel.org/qemu-devel/4dde2e66-63cb-4390-9538-c032310db3e3@gmail.com/
Suggested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220215080307.69550-11-f4bug@amsat.org
Reviewed by: Cameron Esfahani <dirty@apple.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
spice updated the spelling (and arguments) of "attache_worker" in
0.15.0. Update QEMU to match, preventing -Wdeprecated-declarations
compilations from reporting build errors.
See also:
974692bda1
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-3-berrange@redhat.com>
Message-Id: <20220105135009.1584676-3-alex.bennee@linaro.org>
With latest clang 13.0.0 we get
../ui/clipboard.c:47:34: error: variable 'old' set but not used [-Werror,-Wunused-but-set-variable]
g_autoptr(QemuClipboardInfo) old = NULL;
^
The compiler can't tell that we only declared this variable in
order to get the side effect of free'ing it when out of scope.
This pattern is a little dubious for a use of g_autoptr, so
rewrite the code to avoid it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[AJB: fix merge conflict]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-2-berrange@redhat.com>
Message-Id: <20220105135009.1584676-2-alex.bennee@linaro.org>
This code seems to be used by vmport hack, passing these values allows
to implement horizontal scroll support even when using vmport.
In case it's not supported horizontal scroll will act as a vertical one.
Signed-off-by: Dmitry Petrov <dpetroff@gmail.com>
Message-Id: <20220108153947.171861-6-dpetroff@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
