Coverity points out that in do_interrupt64() in the "to inner
privilege" codepath we set "ss = 0", but because we also set
"new_stack = 1" there, later in the function we will always override
that value of ss with "ss = 0 | dpl".
Remove the unnecessary initialization of ss, which allows us to
reduce the scope of the variable to only where it is used. Borrow a
comment from helper_lcall_protected() that explains what "0 | dpl"
means here.
Resolves: Coverity CID 1527395
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723162525.1585743-1-peter.maydell@linaro.org
Coverity complains (CID 1547592) that in dump_address_map() we take a
value stored in a signed integer variable 'i' and shift it by enough
to shift into the sign bit when we construct the value 'logical'.
This isn't a bug for QEMU because we use -fwrapv semantics, but
we can make Coverity happy by using an unsigned type for the loop
variables i, j, k in this function.
While we're changing the declaration of the variables, put them
in the for() loops so their scope is the minimum required (a style
now permitted by our coding style guide).
Resolves: Coverity CID 1547592
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723154207.1483665-1-peter.maydell@linaro.org
Coverity gets confused about the use of the 'segment' variable in the
pptlb helper function: it thinks that we can take a code path where
we first initialize it:
unsigned segment = XTENSA_MPU_PROBE_B; // 0x40000000
and then use that value as a shift count:
} else if (nhits == 1 && (env->sregs[MPUENB] & (1u << segment))) {
In fact this isn't possible, beacuse xtensa_mpu_lookup() is passed
'&segment', and it uses that as an output value, which it will always
set if it returns nonzero. But the way the code is currently written
is confusing to a human reader as well as to Coverity.
Instead of initializing 'segment' at the top of the function with a
value that's only used in the "nhits == 0" code path, use the
constant value directly in that code path, and don't initialize
segment. This matches the way we use xtensa_mpu_lookup() in its
other callsites in get_physical_addr_mpu().
Resolves: Coverity CID 1547589
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-id: 20240723151454.1396826-1-peter.maydell@linaro.org
Coverity points out that in helper_eq_b() we have an int32_t 'msk'
and we end up shifting into its sign bit. This is OK for QEMU because
we use -fwrapv to give this well defined semantics, but when you look
at what this function is doing it's doing bit operations, so we
should be using an unsigned variable anyway. This also matches the
return type of the function.
Make 'ret' and 'msk' uint32_t.
Resolves: Coverity CID 1547758
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240723151042.1396610-1-peter.maydell@linaro.org
When determining the current vector length, the SMCR_EL2.LEN and
SVCR_EL2.LEN settings should only be considered if EL2 is enabled
(compare the pseudocode CurrentSVL and CurrentNSVL which call
EL2Enabled()).
We were checking against ARM_FEATURE_EL2 rather than calling
arm_is_el2_enabled(), which meant that we would look at
SMCR_EL2/SVCR_EL2 when in Secure EL1 or Secure EL0 even if Secure EL2
was not enabled.
Use the correct check in sve_vqm1_for_el_sm().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-5-peter.maydell@linaro.org
The function tszimm_esz() returns a shift amount, or possibly -1 in
certain cases that correspond to unallocated encodings in the
instruction set. We catch these later in the trans_ functions
(generally with an "a-esz < 0" check), but before we do the
decodetree-generated code will also call tszimm_shr() or tszimm_sl(),
which will use the tszimm_esz() return value as a shift count without
checking that it is not negative, which is undefined behaviour.
Avoid the UB by checking the return value in tszimm_shr() and
tszimm_shl().
Cc: qemu-stable@nongnu.org
Resolves: Coverity CID 1547617, 1547694
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-4-peter.maydell@linaro.org
The UMOPA/UMOPS instructions are supposed to multiply unsigned 8 or
16 bit elements and accumulate the products into a 64-bit element.
In the Arm ARM pseudocode, this is done with the usual
infinite-precision signed arithmetic. However our implementation
doesn't quite get it right, because in the DEF_IMOP_64() macro we do:
sum += (NTYPE)(n >> 0) * (MTYPE)(m >> 0);
where NTYPE and MTYPE are uint16_t or int16_t. In the uint16_t case,
the C usual arithmetic conversions mean the values are converted to
"int" type and the multiply is done as a 32-bit multiply. This means
that if the inputs are, for example, 0xffff and 0xffff then the
result is 0xFFFE0001 as an int, which is then promoted to uint64_t
for the accumulation into sum; this promotion incorrectly sign
extends the multiply.
Avoid the incorrect sign extension by casting to int64_t before
the multiply, so we do the multiply as 64-bit signed arithmetic,
which is a type large enough that the multiply can never
overflow into the sign bit.
(The equivalent 8-bit operations in DEF_IMOP_32() are fine, because
the 8-bit multiplies can never overflow into the sign bit of a
32-bit integer.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2372
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-3-peter.maydell@linaro.org
For an instruction which accesses a 128-bit element tile when
the SVL is also 128 (for example MOV z0.Q, p0/M, ZA0H.Q[w0,0]),
we will assert in get_tile_rowcol():
qemu-system-aarch64: ../../tcg/tcg-op.c:926: tcg_gen_deposit_z_i32: Assertion `len > 0' failed.
This happens because we calculate
len = ctz32(streaming_vec_reg_size(s)) - esz;$
but if the SVL and the element size are the same len is 0, and
the deposit operation asserts.
In this case the ZA storage contains exactly one 128 bit
element ZA tile, and the horizontal or vertical slice is just
that tile. This means that regardless of the index value in
the Ws register, we always access that tile. (In pseudocode terms,
we calculate (index + offset) MOD 1, which is 0.)
Special case the len == 0 case to avoid hitting the assertion
in tcg_gen_deposit_z_i32().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-2-peter.maydell@linaro.org
In bcm2835_property_mbox_push(), some variables are defined at function scope
but used only in a smaller scope of the function:
* tag, bufsize, resplen are used only in the body of the while() loop
* tmp is used only for RPI_FWREQ_SET_POWER_STATE (and is badly named)
Declare these variables in the scope where they're needed, so the code
is easier to read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-5-peter.maydell@linaro.org
In the long function bcm2835_property_mbox_push(), the variables
start_num, number and otp_row are used only in the four cases which
access OTP data, and their uses don't overlap with each other.
Make these variables have scope restricted to the cases where they're
used, so it's easier to read each individual case without having to
cross-refer up to the variable declaration at the top of the function
and check whether the variable is also used later in the loop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-4-peter.maydell@linaro.org
Coverity points out that in our handling of the property
RPI_FWREQ_SET_CUSTOMER_OTP we have a potential overflow. This
happens because we read start_num and number from the guest as
unsigned 32 bit integers, but then the variable 'n' we use as a loop
counter as we iterate from start_num to start_num + number is only an
"int". That means that if the guest passes us a very large start_num
we will interpret it as negative. This will result in an assertion
failure inside bcm2835_otp_set_row(), which checks that we didn't
pass it an invalid row number.
A similar issue applies to all the properties for accessing OTP rows
where we are iterating through with a start and length read from the
guest.
Use uint32_t for the loop counter to avoid this problem. Because in
all cases 'n' is only used as a loop counter, we can do this as
part of the for(), restricting its scope to exactly where we need it.
Resolves: Coverity CID 1549401
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-3-peter.maydell@linaro.org
The documentation of the "Set palette" mailbox property at
https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface#set-palette
says it has the form:
Length: 24..1032
Value:
u32: offset: first palette index to set (0-255)
u32: length: number of palette entries to set (1-256)
u32...: RGBA palette values (offset to offset+length-1)
We get this wrong in a couple of ways:
* we aren't checking the offset and length are in range, so the guest
can make us spin for a long time by providing a large length
* the bounds check on our loop is wrong: we should iterate through
'length' palette entries, not 'length - offset' entries
Fix the loop to implement the bounds checks and get the loop
condition right. In the process, make the variables local to
this switch case, rather than function-global, so it's clearer
what type they are when reading the code.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-2-peter.maydell@linaro.org
This is identical with commit 30a1690f24 ("hvf: arm: Do not advance
PC when raising an exception") but for writes instead of reads.
Fixes: a2260983c6 ("hvf: arm: Add support for GICv3")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Setting pmu property used to have no effect for hvf so fix it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Any sysreg access results in an exception unless defined otherwise so
we should raise an exception by default.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_arch_init_vcpu() used to remove PMU when it is not available even
if the CPU model needs one. It is semantically incorrect, and may
continue execution on a misbehaving host that advertises a CPU model
while lacking its PMU. Keep the PMU when the CPU model needs one, and
let kvm_arm_vcpu_init() fail if the KVM implementation mismatches with
our expectation.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm/kvm.c checked PMU availability but unconditionally set the
PMU feature flag for the host CPU model, which is confusing. Set the
feature flag only when available.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity has spotted a possible problem with the OAS handling
(CID 1558464), where the error return of oas2bits() -1 is not
checked, which can cause an overflow in oas value.
oas2bits() is only called with valid inputs, harden the function
to assert that.
Reported-By: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20240722103531.2377348-1-smostafa@google.com
Link: https://lore.kernel.org/qemu-devel/CAFEAcA-H=n-3mHC+eL6YjfL1m+x+b+Fk3mkgZbN74WNxifFVow@mail.gmail.com/
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a bare-metal application on the raspi3 board reads the
AUX_MU_STAT_REG MMIO register while the device's buffer is
at full receive FIFO capacity
(i.e. `s->read_count == BCM2835_AUX_RX_FIFO_LEN`) the
assertion `assert(s->read_count < BCM2835_AUX_RX_FIFO_LEN)`
fails.
Reported-by: Cryptjar <cryptjar@junk.studio>
Suggested-by: Cryptjar <cryptjar@junk.studio>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/459
Signed-off-by: Frederik van Hövell <frederik@fvhovell.nl>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=FxPm
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.1-2-20240726-1' of https://gitlab.com/npiggin/qemu into staging
fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmai5TsACgkQZ7MCdqhi
# HK4rgA//eh0ax3JnBGma1rVEDL5n5cdEYV+ATFYGc529CUZFUar3IMqSw3in8bJy
# uvQ6Cr/7IuusNEtoiYtdN1yNasqsm3fZB/hZ/Ekz32TsbpBRdkJW3ucavAu2rGM/
# EKRo7Y8gciy/Mj9y2JlIZqsDqYe+gribfGQvIg27DX+caAW/lKQdAdt4oJMTSdmr
# XR8JjtMdhUazKrI+bc/4EG6tIQyUdp+S1/z1q6Wthqt58dNRElTjkD9op4AsUWMu
# CE4a8ALCZoj3P3m+xf7xi7fT2JC2xgmNRCi3KbbhVEHdbFB6ViNYNuEYRS6GmpdC
# C6J/ZR6QXs6KB1KO7EyB+vsuxLX4Eb8aeCFxwMlzJ9Fo4g8JudABXOFzYTKX1xBn
# DUIGX91YACV43M2MvP/KuEU4zWpREO+U8MbQs/6s6fYsnCO2eKVJt/0Aaf1hmk37
# gY5Ak2DRx5TBvxlFy87zgHxHWTh/dGZodpN3IvCIDzVLnHGFlfluJbFRaoZSOecb
# 1vxDHORjIruLcAxNVEGkJ/6MxOrnjjoUzSPUQcbgJ5BpFZOdeGLiMAULu/HBLBd9
# 7dvVw+PeNEPJttYumljOD6nYc/jENhLQsvkc3++bwGNc/rpi4YngtB4jhT1HV2Cl
# oLool2ooKZgV4qx6IzeYo9feElvWVNK5XPzqDpSDlt9MaI+yTYM=
# =FxPm
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 26 Jul 2024 09:52:27 AM AEST
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.1-2-20240726-1' of https://gitlab.com/npiggin/qemu: (96 commits)
target/ppc: Remove includes from mmu-book3s-v3.h
target/ppc/mmu-radix64: Remove externally unused parts from header
target/ppc: Unexport some functions from mmu-book3s-v3.h
target/ppc/mmu-hash32.c: Move get_pteg_offset32() to the header
target/ppc/mmu-hash32.c: Inline and remove ppc_hash32_pte_raddr()
target/ppc/mmu_common.c: Remove mmu_ctx_t
target/ppc/mmu_common.c: Stop using ctx in get_bat_6xx_tlb()
target/ppc: Remove bat_size_prot()
target/ppc/mmu_common.c: Use defines instead of numeric constants
target/ppc/mmu_common.c: Rename function parameter
target/ppc/mmu_common.c: Stop using ctx in ppc6xx_tlb_check()
target/ppc/mmu_common.c: Remove key field from mmu_ctx_t
target/ppc/mmu_common.c: Init variable in function that relies on it
target/ppc/mmu-hash32.c: Inline and remove ppc_hash32_pte_prot()
target/ppc: Add function to get protection key for hash32 MMU
target/ppc/mmu_common.c: Remove ptem field from mmu_ctx_t
target/ppc/mmu_common.c: Inline and remove ppc6xx_tlb_pte_check()
target/ppc/mmu_common.c: Simplify a switch statement
target/ppc/mmu_common.c: Remove single use local variable
target/ppc/mmu_common.c: Convert local variable to bool
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Drop includes from header that is not needed by the header itself and
only include them from C files that really need it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move the parts not needed outside of mmu-radix64.c from the header to
the C file to leave only parts in the header that need to be exported.
Also drop unneded include of this header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ppc_hash64_hpt_base() and ppc_hash64_hpt_mask() functions are
mostly used by mmu-hash64.c only but there is one call to
ppc_hash64_hpt_mask() in hw/ppc/spapr_vhyp_mmu.c.in a helper function
that can be moved to mmu-hash64.c which allows these functions to be
removed from the header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is a simple shared function, move it to other similar
static inline functions in the header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is used only once and does not add more clarity than
doing it inline.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Completely get rid of mmu_ctx_t after converting the remaining
functions to pass raddr and prot without the context struct.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass raddr and prot in function parameters instead
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There is already a hash32_bat_prot() function that does most if this
and the rest can be inlined. Export hash32_bat_prot() and rename it to
ppc_hash32_bat_prot() to match other functions and use it in
get_bat_6xx_tlb().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Replace some BAT related constants with defines from mmu-hash32.h
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Rename parameter of get_bat_6xx_tlb() from virtual to eaddr to match
other functions.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass raddr and prot in function parameters instead.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass it as a function parameter and remove it from mmu_ctx_t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ppc6xx_tlb_check() relies on the caller to initialise raddr field
in ctx. Move this init from the only caller into the function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This is used only once and can be inlined.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add a function to get key bit from SR and use it instead of open coded
version.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of passing around ptem in context use it once in the same
function so it can be removed from mmu_ctx_t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is only called once and we can make the caller simpler
by inlining it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() the switch handles all cases so the
default is never reached and can be dropped. Also group together cases
which just return -4.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() tagtet_page_bits local is declared
only to use TARGET_PAGE_BITS once. Drop the unneeded variable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() ds is used as bool, declare it as
such. Also use named constant instead of hex value.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass it as a parameter instead. Also use named constants instead of
hex values when extracting bits from SR.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is used only once, its return value is ignored and one
of its parameter is a return value from a previous call. It is better
to inline it in the caller and remove it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Return hash value via a parameter and remove it from mmu_ctx.t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The eaddr field of mmu_ctx_t is set once but never used so can be
removed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Invert conditions to avoid deep nested ifs and return early instead.
Remove some obvious comments that don't add more clarity.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of using a local ret variable return directly and remove the
local.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In ppc6xx_tlb_pte_check() the pp variable is used only once to pass it
to a function parameter with the same name. Remove the local and
inline the value. Also use named constant for the hex value to make it
clearer.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In ppc6xx_tlb_pte_check() the pteh variable is used only once to
compare to the h parameter of the function. Inline its value and use
pteh name for the function parameter which is more descriptive.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ptev variable in ppc6xx_tlb_pte_check() is used only once and just
obfuscates an otherwise clear value. Get rid of it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ptem variable in ppc6xx_tlb_pte_check() is used only once,
simplify by removing it as the value is already clear itself without
adding a local name for it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>