The raven_io_ops MemoryRegionOps is the only one in the source tree
which sets .valid.unaligned to indicate that it should support
unaligned accesses and which does not also set .impl.unaligned to
indicate that its read and write functions can do the unaligned
handling themselves. This is a problem, because at the moment the
core memory system does not implement the support for handling
unaligned accesses by doing a series of aligned accesses and
combining them (system/memory.c:access_with_adjusted_size() has a
TODO comment noting this).
Fortunately raven_io_read() and raven_io_write() will correctly deal
with the case of being passed an unaligned address, so we can fix the
missing unaligned access support by setting .impl.unaligned in the
MemoryRegionOps struct.
Fixes: 9a1839164c ("raven: Implement non-contiguous I/O region")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240112134640.1775041-1-peter.maydell@linaro.org
The Astro/Elroy chip can work in either Hard-Fail or Soft-Fail mode.
Hard fail means the system bus will send an HPMC (=crash) to the
processor, soft fail means the system bus will ignore timeouts of
MMIO-reads or MMIO-writes and return -1ULL.
The HF mode is controlled by a bit in the status register and is usually
programmed by the OS. Return the corresponing values based on the current
value of that bit.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Instead of stopping the emulation, report a MEMTX_DECODE_ERROR if the OS
tries to access non-existent registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The latest version of qemu (v8.2.0-869-g7a1dc45af5) crashes when booting
the mcimx7d-sabre emulation with Linux v5.11 and later.
qemu-system-arm: ../system/memory.c:2750: memory_region_set_alias_offset: Assertion `mr->alias' failed.
Problem is that the Designware PCIe emulation accepts the full value range
for the iATU Viewport Register. However, both hardware and emulation only
support four inbound and four outbound viewports.
The Linux kernel determines the number of supported viewports by writing
0xff into the viewport register and reading the value back. The expected
value when reading the register is the highest supported viewport index.
Match that code by masking the supported viewport value range when the
register is written. With this change, the Linux kernel reports
imx6q-pcie 33800000.pcie: iATU: unroll F, 4 ob, 4 ib, align 0K, limit 4G
as expected and supported.
Fixes: d64e5eabc4 ("pci: Add support for Designware IP block")
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Nikita Ostrenkov <n.ostrenkov@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20240129060055.2616989-1-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There were some regressions introduced with Qemu v8.2 on the hppa/hppa64
target, e.g.:
- 32-bit HP-UX crashes on B160L (32-bit) machine
- NetBSD boot failure due to power button in page zero
- NetBSD FPU detection failure
- OpenBSD 7.4 boot failure
This patch series fixes those known regressions and additionally:
- allows usage of the max. 3840MB of memory (instead of 3GB),
- adds support for the qemu --nodefaults option (to debug other devices)
This patch set will not fix those known (non-regression) bugs:
- HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine
- Linux kernel will still fail to boot on C3700 as long as kernel modules are used.
Changes v2->v3:
- Added comment about Figures H-10 and H-11 in the parisc2.0 spec
in patch which calculate PDC address translation if PSW.W=0
- Introduce and use hppa_set_ior_and_isr()
- Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check
if default devices should be created
- Added Tested-by and Reviewed-by tags
Changes v1->v2:
- fix OpenBSD boot with SeaBIOS v15 instead of v14
- commit message enhancements suggested by BALATON Zoltan
- use uint64_t for ram_max in patch #1
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP
X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM
nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc=
=FAMY
-----END PGP SIGNATURE-----
Merge tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa qemu v8.2 regression fixes
There were some regressions introduced with Qemu v8.2 on the hppa/hppa64
target, e.g.:
- 32-bit HP-UX crashes on B160L (32-bit) machine
- NetBSD boot failure due to power button in page zero
- NetBSD FPU detection failure
- OpenBSD 7.4 boot failure
This patch series fixes those known regressions and additionally:
- allows usage of the max. 3840MB of memory (instead of 3GB),
- adds support for the qemu --nodefaults option (to debug other devices)
This patch set will not fix those known (non-regression) bugs:
- HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine
- Linux kernel will still fail to boot on C3700 as long as kernel modules are used.
Changes v2->v3:
- Added comment about Figures H-10 and H-11 in the parisc2.0 spec
in patch which calculate PDC address translation if PSW.W=0
- Introduce and use hppa_set_ior_and_isr()
- Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check
if default devices should be created
- Added Tested-by and Reviewed-by tags
Changes v1->v2:
- fix OpenBSD boot with SeaBIOS v15 instead of v14
- commit message enhancements suggested by BALATON Zoltan
- use uint64_t for ram_max in patch #1
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP
# X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM
# nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc=
# =FAMY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 13 Jan 2024 05:57:17 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 15
target/hppa: Fix IOR and ISR on error in probe
target/hppa: Fix IOR and ISR on unaligned access trap
target/hppa: Export function hppa_set_ior_and_isr()
target/hppa: Avoid accessing %gr0 when raising exception
hw/hppa: Move software power button address back into PDC
target/hppa: Fix PDC address translation on PA2.0 with PSW.W=0
hw/pci-host/astro: Add missing astro & elroy registers for NetBSD
hw/hppa/machine: Disable default devices with --nodefaults option
hw/hppa/machine: Allow up to 3840 MB total memory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NetBSD accesses some astro and elroy registers which aren't accessed
by Linux yet. Add emulation for those registers to allow NetBSD to
boot further.
Please note that this patch is not sufficient to completely boot up
NetBSD on the 64-bit C3700 machine yet.
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
ACPI DSDT generator needs information like ECAM range, PIO range, 32-bit
and 64-bit PCI MMIO range etc related to the PCI host bridge. Instead of
making these values machine specific, create properties for the GPEX
host bridge with default value 0. During initialization, the firmware
can initialize these properties with correct values for the platform.
This basically allows DSDT generator code independent of the machine
specific memory map accesses.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231218150247.466427-11-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When an Error** reference is available, it is better to
propagate local errors, rather then using generic ones,
which might terminate the whole QEMU process.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-26-philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-47-richard.henderson@linaro.org>
Apply the "32-bit PCI addressing on 40-bit Runway" as the default
iommu transformation. This allows PCI devices to dma PDC memory.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add new XSCOM registers introduced in PHB5.
Apply bit-masks within xscom-write methods.
Bit-masks specified using PPC_BITMASK macro.
Signed-off-by: Saif Abrar <saif.abrar@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20231016175948.10869-1-saif.abrar@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Articia S is a generic chipset supporting several different CPUs
that were among others used on some PPC boards. This is a minimal
emulation of the parts needed for emulating the AmigaOne board.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <83822787431701cf4d460298d3e3845f362e5da1.1698406922.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
g3oVZA==
=dxC7
-----END PGP SIGNATURE-----
Merge tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu into staging
target/hppa: Implement PA2.0 instructions
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
# ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
# O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
# XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
# mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
# smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
# g3oVZA==
# =dxC7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 11:00:01 HKT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu: (85 commits)
hw/hppa: Allow C3700 with 64-bit and B160L with 32-bit CPU only
hw/hppa: Turn on 64-bit CPU for C3700 machine
hw/pci-host/astro: Trigger CPU irq on CPU HPA in high memory
hw/pci-host/astro: Map Astro chip into 64-bit I/O memory region
target/hppa: Improve interrupt logging
target/hppa: Update IIAOQ, IIASQ for pa2.0
target/hppa: Create raise_exception_with_ior
target/hppa: Add unwind_breg to CPUHPPAState
target/hppa: Clear upper bits in mtctl for pa1.x
target/hppa: Avoid async_safe_run_on_cpu on uniprocessor system
target/hppa: Add pa2.0 cpu local tlb flushes
target/hppa: Implement pa2.0 data prefetch instructions
linux-user/hppa: Drop EXCP_DUMP from handled exceptions
hw/hppa: Translate phys addresses for the cpu
include/hw/elf: Remove truncating signed casts
target/hppa: Return zero for r0 from load_gpr
target/hppa: Precompute zero into DisasContext
target/hppa: Fix interruption based on default PSW
target/hppa: Implement PERMH
target/hppa: Implement MIXH, MIXW
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The CPU HPA is in the high F-region on PA2.0 CPUs, so use F_EXTEND()
to trigger interrupt request at the right CPU HPA address.
Note that the cpu_hpa value comes out of the IRT, which doesn't store the
higher addresss bits.
Signed-off-by: Helge Deller <deller@gmx.de>
This patch modifies pci_setup_iommu() to set PCIIOMMUOps
instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to
get an address space for a PCI device in vendor specific
way. The PCIIOMMUOps still offers this functionality. But
using PCIIOMMUOps leaves space to add more iommu related
vendor specific operations.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[ clg: - refreshed on latest QEMU
- included hw/remote/iommu.c
- documentation update
- asserts in pci_setup_iommu()
- removed checks on iommu_bus->iommu_ops->get_address_space
- included Elroy PCI host (PA-RISC) ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This series adds a new PA-RISC machine emulation for the HP-PARISC
C3700 workstation.
The physical HP C3700 machine has a PA2.0 (64-bit) CPU, in contrast to
the existing emulation of a B160L workstation which is a 32-bit only
machine and where it's Dino PCI controller isn't 64-bit capable.
With the HP C3700 machine emulation (together with the emulated Astro
Memory controller and the Elroy PCI bridge) it's now possible to
enhance the hppa CPU emulation to support the 64-bit instruction set
in upcoming patches.
Helge
v4 changes:
- Fix testsuite error in astro by adding a realize() implementation
v3 changes:
based on feedback from BALATON Zoltan <balaton@eik.bme.hu>:
- apply paches in different order to bring them logically closer to each other
- update comments in lasips2
- rephrased title and commit message of MAINTAINERS patch
v2 changes:
suggestions by BALATON Zoltan <balaton@eik.bme.hu>:
- merged pci_ids and tulip patch
- dropped comments in lasips2
- mention additional cleanups in patch "Require at least SeaBIOS-hppa version 10"
suggestions by Philippe Mathieu-Daudé <philmd@linaro.org>:
- dropped static pci_bus variable
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZTGzDQAKCRD3ErUQojoP
X9psAP0cHfTuJuXMiBWhrJhfp5VV0TURvaNXjCGyK8qvfbK+zgEArg3nvKhZPvnu
jVSq6b/Ppf3eCAZIYSVIsfLITbElTQ4=
=Esj+
-----END PGP SIGNATURE-----
Merge tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Add emulation of a C3700 HP-PARISC workstation
This series adds a new PA-RISC machine emulation for the HP-PARISC
C3700 workstation.
The physical HP C3700 machine has a PA2.0 (64-bit) CPU, in contrast to
the existing emulation of a B160L workstation which is a 32-bit only
machine and where it's Dino PCI controller isn't 64-bit capable.
With the HP C3700 machine emulation (together with the emulated Astro
Memory controller and the Elroy PCI bridge) it's now possible to
enhance the hppa CPU emulation to support the 64-bit instruction set
in upcoming patches.
Helge
v4 changes:
- Fix testsuite error in astro by adding a realize() implementation
v3 changes:
based on feedback from BALATON Zoltan <balaton@eik.bme.hu>:
- apply paches in different order to bring them logically closer to each other
- update comments in lasips2
- rephrased title and commit message of MAINTAINERS patch
v2 changes:
suggestions by BALATON Zoltan <balaton@eik.bme.hu>:
- merged pci_ids and tulip patch
- dropped comments in lasips2
- mention additional cleanups in patch "Require at least SeaBIOS-hppa version 10"
suggestions by Philippe Mathieu-Daudé <philmd@linaro.org>:
- dropped static pci_bus variable
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZTGzDQAKCRD3ErUQojoP
# X9psAP0cHfTuJuXMiBWhrJhfp5VV0TURvaNXjCGyK8qvfbK+zgEArg3nvKhZPvnu
# jVSq6b/Ppf3eCAZIYSVIsfLITbElTQ4=
# =Esj+
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 15:51:57 PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa: Add new HP C3700 machine
hw/hppa: Split out machine creation
hw/hppa: Provide RTC and DebugOutputPort on CPU #0
hw/hppa: Export machine name, BTLBs, power-button address via fw_cfg
MAINTAINERS: Update HP-PARISC entries
pci-host: Wire up new Astro/Elroy PCI bridge
hw/pci-host: Add Astro system bus adapter found on PA-RISC machines
lasips2: LASI PS/2 devices are not user-createable
pci_ids/tulip: Add PCI vendor ID for HP and use it in tulip
hw/hppa: Require at least SeaBIOS-hppa version 10
target/hppa: Update to SeaBIOS-hppa version 10
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 64-bit PA-RISC machines use a Astro system bus adapter (SBA)
with Elroy PCI host chips.
Later generation Astro chips were named Pluto, Ike and REO.
Signed-off-by: Helge Deller <deller@gmx.de>
There is no point in exposing an internal MMIO region via
SysBus and directly mapping it in the very same device.
Just map it without using the SysBus API.
Transformation done using the following coccinelle script:
@@
expression sbdev;
expression index;
expression addr;
expression subregion;
@@
- sysbus_init_mmio(sbdev, subregion);
... when != sbdev
- sysbus_mmio_map(sbdev, index, addr);
+ memory_region_add_subregion(get_system_memory(), addr, subregion);
and manually adding the local 'host_mem' variable to
avoid multiple calls to get_system_memory().
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231019071611.98885-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20231012041237.22281-4-philmd@linaro.org>
Host bridge device and PCI function #0 are inverted.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20231012041237.22281-3-philmd@linaro.org>
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20231012041237.22281-2-philmd@linaro.org>
In pcie_bus_realize(), a root bus is realized as a PCIe bus and a non-root
bus is realized as a PCIe bus if its parent bus is a PCIe bus. However,
the child bus "dw-pcie" is realized before the parent bus "pcie" which is
the root PCIe bus. Thus, the extended configuration space is not accessible
on "dw-pcie". The issue can be resolved by adding the
PCI_BUS_EXTENDED_CONFIG_SPACE flag to "pcie" before "dw-pcie" is realized.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-Id: <20230809102257.25121-1-jason.chien@sifive.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Jason Chien <<a href="mailto:jason.chien@sifive.com" target="_blank">jason.chien@sifive.com</a>><br>
There is also pci_new() which creates non-multifunction PCI devices.
Accordingly the parameter is always set to true when a multi function PCI
device is to be created.
The reason for the parameter's existence seems to be that it is used in the
internal PCI code as well which is the only location where it gets set to
false. This one usage can be resolved by factoring out an internal helper
function.
Remove this redundant, error-prone parameter.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230304114043.121024-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i440fx_init() is a legacy init function. The previous patches worked towards
TYPE_I440FX_PCI_HOST_BRIDGE to be instantiated the QOM way. Do this now by
transforming the parameters passed to i440fx_init() into property assignments.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-17-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I440FX needs a different PCI device model if the "igd-passthru" property is
enabled. The type name is currently passed as a parameter to i440fx_init(). This
parameter will be replaced by a property assignment once i440fx_init() gets
resolved.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-16-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the properties in anticipation of QOM'ification; Q35 has the same
properties.
Note that we want to avoid a "ram size" property in the QOM interface since it
seems redundant to both properties introduced in this change. Thus the removal
of the ram_size parameter. We assume the invariant of both properties to sum up
to "ram size" which is already asserted in pc_memory_init(). Under Xen the
invariant seems to hold as well, so we now also check it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-15-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the property in anticipation of QOM'ification; Q35 has the same
property.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-14-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The goal is to eliminate i440fx_init() which is a legacy init function. This
neccessitates the memory regions to be properties, like in Q35, which will be
assigned in board code.
Since i440fx needs different PCI devices in Xen mode, and since i440fx shall
be self-contained, the PCI device will be created during realization of the
host. Thus the pointers need to be moved to the host structure to be usable as
properties.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-13-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i440fx_realize() realizes the PCI device inside the host bridge
(PCII440FXState), but is implemented between i440fx_pcihost_realize() and
i440fx_init() which deal with the host bridge itself (I440FXState). Since we
want to append i440fx_init() to i440fx_pcihost_realize() later let's move
i440fx_realize() out of the way.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-12-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`PCIHostState` is often referred to as `phb`, own device state usually as `s`.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-11-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The parent-child relation is usually established near a child's qdev_new(). For
i440fx this allows for reusing the machine parameter, thus avoiding
qdev_get_machine() which relies on a global variable.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Q35 PCI host already has a PCI_HOST_BYPASS_IOMMU property. However, the
host initializes this property itself by accessing global machine state,
thereby assuming it to be a PC machine. Avoid this by having board code
set this property.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Q35 PCI host currently sets the PC machine's PCI bus attribute
through global state, thereby assuming the machine to be a PC machine.
The Q35 machine code already holds on to Q35's pci bus attribute, so can
easily set its own property while preserving encapsulation.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes the following clangd warning (-Winitializer-overrides):
q35.c:297:19: Initializer overrides prior initialization of this subobject
q35.c:292:19: previous initialization is here
Settle on little endian which is consistent with using pci_host_conf_le_ops.
Fixes: bafc90bdc5 ("q35: implement TSEG")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't emulate the gigabit ethernet part of the chip but the MorphOS
driver accesses these and expects to get some valid looking result
otherwise it hangs. Add some minimal dummy implementation to avoid rhis.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230605215145.29458746335@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The phb error macros add a newline for you, so remove the second one to
avoid double whitespace.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Unlike pam_update() which takes the subject -- PAMMemoryRegion -- as
first argument, init_pam() takes it as fifth (!) argument. This makes it
quite hard to figure out what an init_pam() invocation actually
initializes. By moving the subject to the front this should become
clearer.
While at it, lower the DeviceState parameter to Object, also
communicating more clearly that this parameter is just the owner rather
than some (heavy?) dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213162004.2797-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
sysbus_add_io() just wraps memory_region_add_subregion() while also
obscuring where the memory is attached. So use
memory_region_add_subregion() directly and attach it to the existing
memory region s->mch.address_space_io which is set as an alias to
get_system_io() by the q35 machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213162004.2797-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
sysbus_add_io() just wraps memory_region_add_subregion() while also
obscuring where the memory is attached. So use
memory_region_add_subregion() directly and attach it to the existing
memory region s->bus->address_space_io which is set as an alias to
get_system_io() by the pc machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213162004.2797-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the code is designed for re-entrant calls from raven_io_ops to
pci-conf, mark raven_io_ops as reentrancy-safe.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20230427211013.2994127-8-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
145e2198d7 ("hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE
MemoryRegionOps") converted CFGADDR/CFGDATA registers to use
PCI_HOST_BRIDGE's accessor facility and enabled byte swap for both
CFGADDR/CFGDATA register.
However CFGADDR as a ISD internal register is not controlled by
MByteSwap bit, it follows endian of all other ISD register, which
means it ties to little endian.
Move mapping of CFGADDR out of gt64120_update_pci_cfgdata_mapping
to disable endian-swapping.
Fixes: 145e2198d7 ("hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE MemoryRegionOps")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Message-Id: <20230223161958.48696-1-jiaxun.yang@flygoat.com>
[PMD: !!! Note this only fixes little-endian hosts !!! ]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
According to the PegasosII schematics the PCI interrupt lines are
connected to both the gpp pins of the Mv64361 north bridge and the
PINT pins of the VT8231 south bridge so guests can get interrupts from
either of these. So far we only had the MV64361 connections which
worked for on board devices but for additional PCI devices (such as
network or sound card added with -device) guest OSes expect interrupt
from the ISA IRQ 9 where the firmware routes these PCI interrupts in
VT8231 ISA bridge. After the previous patches we can now model this
and also remove the board specific connection from mv64361. Also
configure routing of these lines when using Virtual Open Firmware to
match board firmware for guests that expect this.
This fixes PCI interrupts on pegasos2 under Linux, MorphOS and AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <520ff9e6eeef600ee14a4116c0c7b11940cc499c.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
