New test function "ufstest_query_desc_request" added, which can check one's
virtual UFS device can properly read and its descriptor data.
(Writing descriptors are not implemented yet.)
The testcases attempt to read all kinds of descriptors at least once,
except for configuration descriptors (which are not implemented yet.)
There are some testcases that are intended to make an error caused by
an invalid index value or an invalid selector value.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
New test function "ufstest_query_attr_request" added, which can check one's
virtual UFS device can properly read and write its attribute data.
It tests if reading and writing attributes work properly. There are
some testcases that are intended to make an error caused by writing an
invalid value, allocating an invalid selector and permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
New test function "ufstest_flag_request" added, which can check one's
virtual UFS device can properly read and write its flag data. It tests
if reading, setting, clearing and toggling flags work properly. There
are some testcases that are intended to make an error caused by
permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Minor bugs and errors related to ufs-test are resolved. Some
permissions and code implementations that are not synchronized
with the ufs spec are edited.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Modify to fill the opcode, idn, index, selector information of
all Query Response UPIU. because attr and flag operation of query
response upiu need these information too.
Signed-off-by: KyoungrulKim <k831.kim@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Add a Xen PVH x86 machine based on the abstract PVH Machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add support for optionally creating a PCIe/GPEX controller.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
We've been creating the virtio-mmio devices in forwards order
but since the qbus lists prepend (rather than append) entries,
the virtio busses end up with decreasing base address order.
Xen enables virtio-mmio nodes in forwards order so there's been
a missmatch. So far, we've been working around this with an
out-of-tree patch to Xen.
This reverses the order making sure the virtio busses end up
ordered with increasing base addresses avoiding the need to
patch Xen.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Rename xen_arm.c -> xen-pvh.c to better express that this
is a PVH machine and to align with x86 HVM and future PVH
machine filenames:
hw/i386/xen/xen-hvm.c
hw/i386/xen/xen-pvh.c (in preparation)
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Break out a common Xen PVH machine in preparation for
adding a x86 Xen PVH machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add SMP support for Xen PVH ARM guests.
Create ms->smp.max_cpus ioreq servers to handle hotplug.
Note that ms->smp.max_cpus will be passed to us by the
user (Xen tools) set to the guests maxvcpus.
The value in mc->max_cpus is an absolute maximum for the
-smp option and won't be used to setup ioreq servers unless
the user explicitly specifies it with -smp.
If the user doesn't pass -smp on the command-line, smp.cpus
and smp.max_cpus will default to 1.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tweak machine description to better express that this is
a Xen PVH machine for ARM.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Update file header to use SPDX and remove stray empty
comment line.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Two important patches for the hppa target which missed qemu-v9.1:
- One fix for random linux-user crashes
- One fix for random issues due to loosing the division V-bit
during delivery of hardware interrupts. This triggers all sorts
of random faults when running in system mode.
Helge
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZtgy9AAKCRD3ErUQojoP
X068AQCDCwbzsoQpFX/6Kx2lm3UsW4wrESh/CYcP+epd+X59dAD+LxNwN0ol5Gvl
kPzM+7QdKC7geIXvBxIG6UuggTscJgM=
=9roy
-----END PGP SIGNATURE-----
Merge tag 'hppa-v9.1-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa target fixes
Two important patches for the hppa target which missed qemu-v9.1:
- One fix for random linux-user crashes
- One fix for random issues due to loosing the division V-bit
during delivery of hardware interrupts. This triggers all sorts
of random faults when running in system mode.
Helge
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZtgy9AAKCRD3ErUQojoP
# X068AQCDCwbzsoQpFX/6Kx2lm3UsW4wrESh/CYcP+epd+X59dAD+LxNwN0ol5Gvl
# kPzM+7QdKC7geIXvBxIG6UuggTscJgM=
# =9roy
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Sep 2024 11:14:12 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-v9.1-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Fix random 32-bit linux-user crashes
target/hppa: Fix PSW V-bit packaging in cpu_hppa_get for hppa64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The linux-user hppa target crashes randomly for me since commit
081a0ed188 ("target/hppa: Do not mask in copy_iaoq_entry").
That commit dropped the masking of the IAOQ addresses while copying them
from other registers and instead keeps them with all 64 bits up until
the full gva is formed with the help of hppa_form_gva_psw().
So, when running in linux-user mode on an emulated 64-bit CPU, we need
to mask to a 32-bit address space at the very end in hppa_form_gva_psw()
if the PSW-W flag isn't set (which is the case for linux-user on hppa).
Fixes: 081a0ed188 ("target/hppa: Do not mask in copy_iaoq_entry")
Cc: qemu-stable@nongnu.org # v9.1+
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
While adding hppa64 support, the psw_v variable got extended from 32 to 64
bits. So, when packaging the PSW-V bit from the psw_v variable for interrupt
processing, check bit 31 instead the 63th (sign) bit.
This fixes a hard to find Linux kernel boot issue where the loss of the PSW-V
bit due to an ITLB interruption in the middle of a series of ds/addc
instructions (from the divU milicode library) generated the wrong division
result and thus triggered a Linux kernel crash.
Link: https://lore.kernel.org/lkml/718b8afe-222f-4b3a-96d3-93af0e4ceff1@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 931adff314 ("target/hppa: Update cpu_hppa_get/put_psw for hppa64")
Cc: qemu-stable@nongnu.org # v8.2+
Freeform sections with titles are currently generating a TOC entry for
the first paragraph in the section after the header, which is not what
we want.
(Easiest to observe directly in the QMP reference manual's
"Introduction" section.)
When freeform sections are parsed, we create both a section header *and*
an empty, title-less section. This causes some problems with sphinx's
post-parse tree transforms, see also 2664f317 - this is a similar issue:
Sphinx doesn't like section-less titles and it also doesn't like
title-less sections.
Modify qapidoc.py to parse text directly into the preceding section
title as child nodes, eliminating the section duplication. This removes
the extra text from the TOC.
Only very, very lightly tested: "it looks right at a glance" ™️. I am
still in the process of rewriting qapidoc, so I didn't give it much
deeper thought.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240822204803.1649762-1-jsnow@redhat.com>
Commit 3e7ef738 plugged the use-after-free of the global nbd_server
object, but overlooked a use-after-free of nbd_server->listener.
Although this race is harder to hit, notice that our shutdown path
first drops the reference count of nbd_server->listener, then triggers
actions that can result in a pending client reaching the
nbd_blockdev_client_closed() callback, which in turn calls
qio_net_listener_set_client_func on a potentially stale object.
If we know we don't want any more clients to connect, and have already
told the listener socket to shut down, then we should not be trying to
update the listener socket's associated function.
Reproducer:
> #!/usr/bin/python3
>
> import os
> from threading import Thread
>
> def start_stop():
> while 1:
> os.system('virsh qemu-monitor-command VM \'{"execute": "nbd-server-start",
+"arguments":{"addr":{"type":"unix","data":{"path":"/tmp/nbd-sock"}}}}\'')
> os.system('virsh qemu-monitor-command VM \'{"execute": "nbd-server-stop"}\'')
>
> def nbd_list():
> while 1:
> os.system('/path/to/build/qemu-nbd -L -k /tmp/nbd-sock')
>
> def test():
> sst = Thread(target=start_stop)
> sst.start()
> nlt = Thread(target=nbd_list)
> nlt.start()
>
> sst.join()
> nlt.join()
>
> test()
Fixes: CVE-2024-7409
Fixes: 3e7ef738c8 ("nbd/server: CVE-2024-7409: Close stray clients at server-stop")
CC: qemu-stable@nongnu.org
Reported-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240822143617.800419-2-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
A test run may create boot files several times. Delete the previous boot
file before creating a new one.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240823-san-v4-7-a24c6dfa4ceb@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qtests are broken since a while in the MSYS2 job in the gitlab-CI,
likely due to some changes in the MSYS2 environment. So far nobody has
neither a clue what's going wrong here, nor an idea how to fix this
(in fact most QEMU developers even don't have a Windows environment
available for properly analyzing this problem), so we should disable the
qtests here for the time being to get at least test coverage again
for the remaining tests that are run here.
Since we already get compile-test coverage for the system emulation
in the cross-win64-system job, and since the MSYS2 job is one of the
longest running jobs in our CI (it takes more than 1 hour to complete),
let's seize the opportunity and also cut the run time by disabling
the system emulation completely here, including the libraries that
are only useful for system emulation. In case somebody ever figures
out the failure of the qtests on MSYS2, we can revert this patch
to get everything back.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240820170142.55324-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In commit 412d294ffd we tried to improve the error message printed when
the machine type is unknown, but we used the wrong variable, resulting in:
$ ./build/x86/qemu-system-aarch64 -M bang
qemu-system-aarch64: unsupported machine type: "(null)"
Use -machine help to list supported machines
Use the right variable, so we produce more helpful output:
$ ./build/x86/qemu-system-aarch64 -M bang
qemu-system-aarch64: unsupported machine type: "bang"
Use -machine help to list supported machines
Note that we must move the qdict_del() to below the error_setg(),
because machine_type points into the value of that qdict entry,
and deleting it will make the pointer invalid.
Cc: qemu-stable@nongnu.org
Fixes: 412d294ffd ("vl.c: select_machine(): add selected machine type to error message")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cosmetic: add comments in x86_load_linux() pointing to the kernel documentation
so that users can better understand the code.
CC: qemu-trivial@nongnu.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZsVYjgAKCRBAov/yOSY+
306ZA/9/DFdJB5WbVtv8ZNaRKT2jj6N9o5YlLbO1HsdMGpJbDWNJAIrOIdfBCYzF
oEvjuYItBI9DXcSUE748ucBkct/x4WkBwfL5mxfTRXOhvx3iKFeC2ZKyKPtsciRO
QE4UDmrFbQ9IrW33Vw0+CRMlN/U8xBO7lPDfbk2MA7fM74ns8A==
=EbRt
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240821' of https://gitlab.com/gaosong/qemu into staging
Fix for 9.1
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZsVYjgAKCRBAov/yOSY+
# 306ZA/9/DFdJB5WbVtv8ZNaRKT2jj6N9o5YlLbO1HsdMGpJbDWNJAIrOIdfBCYzF
# oEvjuYItBI9DXcSUE748ucBkct/x4WkBwfL5mxfTRXOhvx3iKFeC2ZKyKPtsciRO
# QE4UDmrFbQ9IrW33Vw0+CRMlN/U8xBO7lPDfbk2MA7fM74ns8A==
# =EbRt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 21 Aug 2024 01:01:34 PM AEST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240821' of https://gitlab.com/gaosong/qemu:
hw/loongarch: Fix length for lowram in ACPI SRAT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The two limit_max variables represent size - 1, just like the
encoding in the GDT, thus the 'old' access was off by one.
Access the minimal size of the new tss: the complete tss contains
the iopb, which may be a larger block than the access api expects,
and irrelevant because the iopb is not accessed during the
switch itself.
Fixes: 8b13106508 ("target/i386/tcg: use X86Access for TSS access")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2511
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240819074052.207783-1-richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
BLSI has inverted semantics for C as compared to the other two
BMI1 instructions, BLSMSK and BLSR. Introduce CC_OP_BLSI* for
this purpose.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2175
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240801075845.573075-3-richard.henderson@linaro.org>
Split out the TCG_COND_TSTEQ logic from gen_prepare_eflags_z,
and use it for CC_OP_BMILG* as well. Prepare for requiring
both zero and non-zero senses.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240801075845.573075-2-richard.henderson@linaro.org>
In particular, if an image has a large bss, we can hit EOF before reading
all bytes of the mapping. Mirror the similar change to linux-user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240820050848.165253-3-richard.henderson@linaro.org>
In particular, if an image has a large bss, we can hit
EOF before reading all host_len bytes of the mapping.
Create a helper, mmap_pread to handle the job for both
the larger block in mmap_h_gt_g itself, as well as the
smaller block in mmap_frag.
Cc: qemu-stable@nongnu.org
Fixes: eb5027ac61 ("linux-user: Split out mmap_h_gt_g")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2504
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240820050848.165253-2-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In multifd_recv_setup() we allocate (among other things)
* a MultiFDRecvData struct to multifd_recv_state::data
* a MultiFDRecvData struct to each multfd_recv_state->params[i].data
(Then during execution we might swap these pointers around.)
But in multifd_recv_cleanup() we free multifd_recv_state->data
in multifd_recv_cleanup_state() but we don't ever free the
multifd_recv_state->params[i].data. This results in a memory
leak reported by LeakSanitizer:
(cd build/asan && \
ASAN_OPTIONS="fast_unwind_on_malloc=0:strip_path_prefix=/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../" \
QTEST_QEMU_BINARY=./qemu-system-x86_64 \
./tests/qtest/migration-test --tap -k -p /x86_64/migration/multifd/file/mapped-ram )
[...]
Direct leak of 72 byte(s) in 3 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9c83c in multifd_recv_setup migration/multifd.c:1606:19
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
#14 0x561cc3796c67 in main system/main.c:48:12
#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9bed9 in multifd_recv_setup migration/multifd.c:1588:32
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
#14 0x561cc3796c67 in main system/main.c:48:12
#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
SUMMARY: AddressSanitizer: 96 byte(s) leaked in 4 allocation(s).
Free the params[i].data too.
Cc: qemu-stable@nongnu.org
Fixes: d117ed0699 ("migration/multifd: Allow receiving pages without packets")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
3 small patches to make sure we don't ship regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbEdw8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp0dsIAKTzhmBR3IviFQVo223RgcDfthxoKejTB5tv
EhGVUi4ddrViIIHsKFZ0pTHXnRcwHpPRokg6GrbqNhrAM6K7ptP8pkEK1DDkbGtq
HaeceK55nNZ/wM1O5xHpRLVc2WtxmBrliDTFHGB2HjURO/kpjoHqWbE6Sn4GILc1
EYU2T3Wn1UFgj+H4L7yF4SzmQSmyzq+7Tml6Z2GzpsatdwCoFQz2nA28piCnRMCq
lusMo2YdE6js9JS/h+zMqgKValuCyuU7S7ZbSO2dvYQwt/hgk07BegBrdsAENNh6
0IWRHrojwAg+4U6ULzbrBG6/hW2A8Q5065D8Nf9Bjy4eAU7QSbU=
=K6xx
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: regression fixes
3 small patches to make sure we don't ship regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbEdw8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp0dsIAKTzhmBR3IviFQVo223RgcDfthxoKejTB5tv
# EhGVUi4ddrViIIHsKFZ0pTHXnRcwHpPRokg6GrbqNhrAM6K7ptP8pkEK1DDkbGtq
# HaeceK55nNZ/wM1O5xHpRLVc2WtxmBrliDTFHGB2HjURO/kpjoHqWbE6Sn4GILc1
# EYU2T3Wn1UFgj+H4L7yF4SzmQSmyzq+7Tml6Z2GzpsatdwCoFQz2nA28piCnRMCq
# lusMo2YdE6js9JS/h+zMqgKValuCyuU7S7ZbSO2dvYQwt/hgk07BegBrdsAENNh6
# 0IWRHrojwAg+4U6ULzbrBG6/hW2A8Q5065D8Nf9Bjy4eAU7QSbU=
# =K6xx
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Aug 2024 08:59:27 PM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
virtio-pci: Fix the use of an uninitialized irqfd
hw/audio/virtio-snd: fix invalid param check
vhost: Add VIRTIO_NET_F_RSC_EXT to vhost feature bits
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The crash was reported in MAC OS and NixOS, here is the link for this bug
https://gitlab.com/qemu-project/qemu/-/issues/2334https://gitlab.com/qemu-project/qemu/-/issues/2321
In this bug, they are using the virtio_input device. The guest notifier was
not supported for this device, The function virtio_pci_set_guest_notifiers()
was not called, and the vector_irqfd was not initialized.
So the fix is adding the check for vector_irqfd in virtio_pci_get_notifier()
The function virtio_pci_get_notifier() can be used in various devices.
It could also be called when VIRTIO_CONFIG_S_DRIVER_OK is not set. In this situation,
the vector_irqfd being NULL is acceptable. We can allow the device continue to boot
If the vector_irqfd still hasn't been initialized after VIRTIO_CONFIG_S_DRIVER_OK
is set, it means that the function set_guest_notifiers was not called before the
driver started. This indicates that the device is not using the notifier.
At this point, we will let the check fail.
This fix is verified in vyatta,MacOS,NixOS,fedora system.
The bt tree for this bug is:
Thread 6 "CPU 0/KVM" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7c817be006c0 (LWP 1269146)]
kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
817 if (irqfd->users == 0) {
(gdb) thread apply all bt
...
Thread 6 (Thread 0x7c817be006c0 (LWP 1269146) "CPU 0/KVM"):
0 kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
1 kvm_virtio_pci_vector_use_one () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:893
2 0x00005983657045e2 in memory_region_write_accessor () at ../qemu-9.0.0/system/memory.c:497
3 0x0000598365704ba6 in access_with_adjusted_size () at ../qemu-9.0.0/system/memory.c:573
4 0x0000598365705059 in memory_region_dispatch_write () at ../qemu-9.0.0/system/memory.c:1528
5 0x00005983659b8e1f in flatview_write_continue_step.isra.0 () at ../qemu-9.0.0/system/physmem.c:2713
6 0x000059836570ba7d in flatview_write_continue () at ../qemu-9.0.0/system/physmem.c:2743
7 flatview_write () at ../qemu-9.0.0/system/physmem.c:2774
8 0x000059836570bb76 in address_space_write () at ../qemu-9.0.0/system/physmem.c:2894
9 0x0000598365763afe in address_space_rw () at ../qemu-9.0.0/system/physmem.c:2904
10 kvm_cpu_exec () at ../qemu-9.0.0/accel/kvm/kvm-all.c:2917
11 0x000059836576656e in kvm_vcpu_thread_fn () at ../qemu-9.0.0/accel/kvm/kvm-accel-ops.c:50
12 0x0000598365926ca8 in qemu_thread_start () at ../qemu-9.0.0/util/qemu-thread-posix.c:541
13 0x00007c8185bcd1cf in ??? () at /usr/lib/libc.so.6
14 0x00007c8185c4e504 in clone () at /usr/lib/libc.so.6
Fixes: 2ce6cff94d ("virtio-pci: fix use of a released vector")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240806093715.65105-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b6083465f ("virtio-snd: check for invalid param shift
operands") tries to prevent invalid parameters specified by the
guest. However, the code is not correct.
Change the code so that the parameters format and rate, which are
a bit numbers, are compared with the bit size of the data type.
Fixes: 9b6083465f ("virtio-snd: check for invalid param shift operands")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240802071805.7123-1-vr_qemu@t-online.de>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
