Pointers to the x86 CPU state already exist at the function scope,
no need to re-obtain them in individual exit reason cases.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-6-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When setting the APICBASE MSR to an illegal value, the APIC
implementation will return an error. This change forwards that report
to the guest as an exception rather than ignoring it when using the hvf
accelerator.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-5-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hvf_caps data structure only exists once as part of the hvf accelerator
state, but it is initialised during vCPU initialisation. This change therefore
adds a check to ensure memory for it is only allocated once.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-4-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The handling for CPUID function 0xD (supported XSAVE features) was
improved in a recent patch. Unfortunately, this appears to have
introduced undefined behaviour for cases where ecx > 30, as the result
of (1 << idx) is undefined if idx > 30.
Per Intel SDM section 13.2, the behaviour for ecx values up to and
including 62 are specified. This change therefore specifically sets
all registers returned by the CPUID instruction to 0 for 63 and higher.
Furthermore, the bit shift uses uint64_t, where behaviour for the entire
range of 2..62 is safe and correct.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-3-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support for x2APIC mode was recently introduced in the software emulated
APIC implementation for TCG. Enabling it when using macOS’s hvf
accelerator is useful and significantly helps performance, as Qemu
currently uses the emulated APIC when running on hvf as well.
This change wires up the read & write operations for the MSR VM exits
and allow-lists the CPUID flag in the x86 hvf runtime.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-2-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit b56617bbcb ("target/i386: Walk NPT in guest real mode") added
logic to run the page table walker even in real mode if we are in NPT
mode. That function then determined whether real mode or paging is
active based on whether the pg_mode variable was 0.
Unfortunately pg_mode is 0 in two situations:
1) Paging is disabled (real mode)
2) Paging is in 2-level paging mode (32bit without PAE)
That means the walker now assumed that 2-level paging mode was real
mode, breaking NetBSD as well as Windows XP.
To fix that, this patch adds a new PG flag to pg_mode which indicates
whether paging is active at all and uses that to determine whether we
are in real mode or not.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2654
Fixes: b56617bbcb ("target/i386: Walk NPT in guest real mode")
Signed-off-by: Alexander Graf <graf@amazon.com>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Link: https://lore.kernel.org/r/20241106154329.67218-1-graf@amazon.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SHA512, SM3, SM4 (CPUID[EAX=7,ECX=1).EAX bits 0 to 2) is supported by
Clearwater Forest processor, add it to QEMU as it does not need any
specific enablement.
See https://lore.kernel.org/kvm/20241105054825.870939-1-tao1.su@linux.intel.com/
for reference.
Reviewed-by: Tao Su <tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cache topology needs to be defined based on CPU topology levels. Thus,
define CPU topology enumeration in qapi/machine.json to make it generic
for all architectures.
To match the general topology naming style, rename CPU_TOPO_LEVEL_* to
CPU_TOPOLOGY_LEVEL_*, and rename SMT and package levels to thread and
socket.
Also, enumerate additional topology levels for non-i386 arches, and add
a CPU_TOPOLOGY_LEVEL_DEFAULT to help future smp-cache object to work
with compatibility requirement of arch-specific cache topology models.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241101083331.340178-3-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the follow-up change, the CPU topology enumeration will be moved to
QAPI. And considerring "invalid" should not be exposed to QAPI as an
unsettable item, so, as a preparation for future changes, remove
"invalid" level from the current CPU topology enumeration structure
and define it by a macro instead.
Due to the removal of the enumeration of "invalid", bit 0 of
CPUX86State.avail_cpu_topo bitmap will no longer correspond to "invalid"
level, but will start at the SMT level. Therefore, to honor this change,
update the encoding rule for CPUID[0x1F].
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-2-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Alias the 'endian' property as 'little-endian' because the 'ENDI'
bit is set when the endianness is in little order, and unset in
big order.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20241105130431.22564-2-philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <3f61b85c-9382-4520-a1ce-5476eb16fb56@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
FEAT_CMOW introduces support for controlling cache maintenance
instructions executed in EL0/1 and is mandatory from Armv8.8.
On real hardware, the main use for this feature is to prevent processes
from invalidating or flushing cache lines for addresses they only have
read permission, which can impact the performance of other processes.
QEMU implements all cache instructions as NOPs, and, according to rule
[1], which states that generating any Permission fault when a cache
instruction is implemented as a NOP is implementation-defined, no
Permission fault is generated for any cache instruction when it lacks
read and write permissions.
QEMU does not model any cache topology, so the PoU and PoC are before
any cache, and rules [2] apply. These rules state that generating any
MMU fault for cache instructions in this topology is also
implementation-defined. Therefore, for FEAT_CMOW, we do not generate any
MMU faults either, instead, we only advertise it in the feature
register.
[1] Rule R_HGLYG of section D8.14.3, Arm ARM K.a.
[2] Rules R_MZTNR and R_DNZYL of section D8.14.3, Arm ARM K.a.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241104142606.941638-1-gustavo.romero@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our implementation of the indexed version of SVE SDOT/UDOT/USDOT got
the calculation of the inner loop terminator wrong. Although we
correctly account for the element size when we calculate the
terminator for the first iteration:
intptr_t segend = MIN(16 / sizeof(TYPED), opr_sz_n);
we don't do that when we move it forward after the first inner loop
completes. The intention is that we process the vector in 128-bit
segments, which for a 64-bit element size should mean (1, 2), (3, 4),
(5, 6), etc. This bug meant that we would iterate (1, 2), (3, 4, 5,
6), (7, 8, 9, 10) etc and apply the wrong indexed element to some of
the operations, and also index off the end of the vector.
You don't see this bug if the vector length is small enough that we
don't need to iterate the outer loop, i.e. if it is only 128 bits,
or if it is the 64-bit special case from AA32/AA64 AdvSIMD. If the
vector length is 256 bits then we calculate the right results for the
elements in the vector but do index off the end of the vector. Vector
lengths greater than 256 bits see wrong answers. The instructions
that produce 32-bit results behave correctly.
Fix the recalculation of 'segend' for subsequent iterations, and
restore a version of the comment that was lost in the refactor of
commit 7020ffd656 that explains why we only need to clamp segend to
opr_sz_n for the first iteration, not the later ones.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2595
Fixes: 7020ffd656 ("target/arm: Macroize helper_gvec_{s,u}dot_idx_{b,h}")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241101185544.2130972-1-peter.maydell@linaro.org
Our current usage of MMU indexes when EL3 is AArch32 is confused.
Architecturally, when EL3 is AArch32, all Secure code runs under the
Secure PL1&0 translation regime:
* code at EL3, which might be Mon, or SVC, or any of the
other privileged modes (PL1)
* code at EL0 (Secure PL0)
This is different from when EL3 is AArch64, in which case EL3 is its
own translation regime, and EL1 and EL0 (whether AArch32 or AArch64)
have their own regime.
We claimed to be mapping Secure PL1 to our ARMMMUIdx_EL3, but didn't
do anything special about Secure PL0, which meant it used the same
ARMMMUIdx_EL10_0 that NonSecure PL0 does. This resulted in a bug
where arm_sctlr() incorrectly picked the NonSecure SCTLR as the
controlling register when in Secure PL0, which meant we were
spuriously generating alignment faults because we were looking at the
wrong SCTLR control bits.
The use of ARMMMUIdx_EL3 for Secure PL1 also resulted in the bug that
we wouldn't honour the PAN bit for Secure PL1, because there's no
equivalent _PAN mmu index for it.
Fix this by adding two new MMU indexes:
* ARMMMUIdx_E30_0 is for Secure PL0
* ARMMMUIdx_E30_3_PAN is for Secure PL1 when PAN is enabled
The existing ARMMMUIdx_E3 is used to mean "Secure PL1 without PAN"
(and would be named ARMMMUIdx_E30_3 in an AArch32-centric scheme).
These extra two indexes bring us up to the maximum of 16 that the
core code can currently support.
This commit:
* adds the new MMU index handling to the various places
where we deal in MMU index values
* adds assertions that we aren't AArch32 EL3 in a couple of
places that currently use the E10 indexes, to document why
they don't also need to handle the E30 indexes
* documents in a comment why regime_has_2_ranges() doesn't need
updating
Notes for backporting: this commit depends on the preceding revert of
4c2c04746932; that revert and this commit should probably be
backported to everywhere that we originally backported 4c2c047469.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2326
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2588
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241101142845.1712482-3-peter.maydell@linaro.org
This reverts commit 4c2c047469.
This commit tried to fix a problem with our usage of MMU indexes when
EL3 is AArch32, using what it described as a "more complicated
approach" where we share the same MMU index values for Secure PL1&0
and NonSecure PL1&0. In theory this should work, but the change
didn't account for (at least) two things:
(1) The design change means we need to flush the TLBs at any point
where the CPU state flips from one to the other. We already flush
the TLB when SCR.NS is changed, but we don't flush the TLB when we
take an exception from NS PL1&0 into Mon or when we return from Mon
to NS PL1&0, and the commit didn't add any code to do that.
(2) The ATS12NS* address translate instructions allow Mon code (which
is Secure) to do a stage 1+2 page table walk for NS. I thought this
was OK because do_ats_write() does a page table walk which doesn't
use the TLBs, so because it can pass both the MMU index and also an
ARMSecuritySpace argument we can tell the table walk that we want NS
stage1+2, not S. But that means that all the code within the ptw
that needs to find e.g. the regime EL cannot do so only with an
mmu_idx -- all these functions like regime_sctlr(), regime_el(), etc
would need to pass both an mmu_idx and the security_space, so they
can tell whether this is a translation regime controlled by EL1 or
EL3 (and so whether to look at SCTLR.S or SCTLR.NS, etc).
In particular, because regime_el() wasn't updated to look at the
ARMSecuritySpace it would return 1 even when the CPU was in Monitor
mode (and the controlling EL is 3). This meant that page table walks
in Monitor mode would look at the wrong SCTLR, TCR, etc and would
generally fault when they should not.
Rather than trying to make the complicated changes needed to rescue
the design of 4c2c047469, we revert it in order to instead take the
route that that commit describes as "the most straightforward" fix,
where we add new MMU indexes EL30_0, EL30_3, EL30_3_PAN to correspond
to "Secure PL1&0 at PL0", "Secure PL1&0 at PL1", and "Secure PL1&0 at
PL1 with PAN".
This revert will re-expose the "spurious alignment faults in
Secure PL0" issue #2326; we'll fix it again in the next commit.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241101142845.1712482-2-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Set the NaN propagation rule explicitly for the float_status word
used in the rx target.
This not the architecturally correct behaviour, but since this is a
no-behaviour-change patch, we leave a TODO note to that effect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-21-peter.maydell@linaro.org
Set the NaN propagation rule explicitly for the float_status word
used in the openrisc target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-20-peter.maydell@linaro.org
Set the NaN propagation rule explicitly for the float_status word
used in the microblaze target.
This is probably not the architecturally correct behaviour,
but since this is a no-behaviour-change patch, we leave a
TODO note to that effect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-19-peter.maydell@linaro.org
Although the floating point rounding mode for Microblaze is always
nearest-even, we cannot set it just once in the CPU initfn. This is
because env->fp_status is in the part of the CPU state struct that is
zeroed on reset.
Move the call to set_float_rounding_mode() into the reset fn.
(This had no guest-visible effects because it happens that the
float_round_nearest_even enum value is 0, so when the struct was
zeroed it didn't corrupt the setting.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-18-peter.maydell@linaro.org
Set the NaN propagation rule explicitly for the float_status word
used in this target.
This is a no-behaviour-change commit, so we retain the existing
behaviour of x87-style pick-largest-significand NaN propagation.
This is however not the architecturally correct handling, so we leave
a TODO note to that effect.
We also leave a TODO note pointing out that all this code in the cpu
initfn (including the existing setting up of env->flags and the FPCR)
should be in a currently non-existent CPU reset function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-17-peter.maydell@linaro.org
Set the NaN propagation rule explicitly for the float_status words
used in the x86 target.
This is a no-behaviour-change commit, so we retain the existing
behaviour of using the x87-style "prefer QNaN over SNaN, then prefer
the NaN with the larger significand" for MMX and SSE. This is
however not the documented hardware behaviour, so we leave a TODO
note about what we should be doing instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-16-peter.maydell@linaro.org
Set the NaN propagation rule explicitly in xtensa_use_first_nan().
(When we convert the softfloat pickNaNMulAdd routine to also
select a NaN propagation rule at runtime, we will be able to
remove the use_first_nan flag because the propagation rules
will handle everything.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-15-peter.maydell@linaro.org
In xtensa we currently call set_use_first_nan() in a lot of
places where we want to switch the NaN-propagation handling.
We're about to change the softfloat API we use to do that,
so start by factoring all the calls out into a single
xtensa_use_first_nan() function.
The bulk of this change was done with
sed -i -e 's/set_use_first_nan(\([^,]*\),[^)]*)/xtensa_use_first_nan(env, \1)/' target/xtensa/fpu_helper.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-14-peter.maydell@linaro.org
Set the NaN propagation rule explicitly in the float_status
words we use.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-13-peter.maydell@linaro.org
Currently we call cpu_put_fsr(0) in sparc_cpu_realizefn(), which
initializes various fields in the CPU struct:
* fsr_cexc_ftt
* fcc[]
* fsr_qne
* fsr
It also sets the rounding mode in env->fp_status.
This is largely pointless, because when we later reset the CPU
this will zero out all the fields up until the "end_reset_fields"
label, which includes all of these (but not fp_status!)
Move the cpu_put_fsr(env, 0) call to reset, because that expresses
the logical requirement: we want to reset FSR to 0 on every reset.
This isn't a behaviour change because the fields are all zero anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-12-peter.maydell@linaro.org
In cf_fpu_gdb_get_reg() and cf_fpu_gdb_set_reg() we use a temporary
float_status variable to pass to floatx80_to_float64() and
float64_to_floatx80(), but we don't initialize it, meaning that those
functions could access uninitialized data. Zero-init the structs.
(We don't need to set a NaN-propagation rule here because we
don't use these with a 2-argument fpu operation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-11-peter.maydell@linaro.org
Explicitly set the 2-NaN propagation rule on env->fp_status
and on the temporary fp_status that we use in frem (since
we pass that to a division operation function).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Set the 2-NaN propagation rule explicitly in env->fp_status
and env->vec_status.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-9-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in env->fpu_status.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-8-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in env->fp_status.
Really we only need to do this at CPU reset (after reset has zeroed
out most of the CPU state struct, which typically includes fp_status
fields). However target/hppa does not currently implement CPU reset
at all, so leave a TODO comment to note that this could be moved if
we ever do implement reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-7-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in the float_status word we
use.
(There are a couple of places in fpu_helper.c where we create a
dummy float_status word with "float_status *s = { };", but these
are only used for calling float*_is_quiet_nan() so it doesn't
matter that we don't set a 2-NaN propagation rule there.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-6-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in the float_status words
we use.
For active_fpu.fp_status, we do this in a new fp_reset() function
which mirrors the existing msa_reset() function in doing "first call
restore to set the fp status parts that depend on CPU state, then set
the fp status parts that are constant".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241025141254.2141506-5-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in the float_status words
we use. We wrap this plus the pre-existing setting of the
tininess-before-rounding flag in a new function
arm_set_default_fp_behaviours() to avoid repetition, since we have a
lot of float_status words at this point.
The situation with FPA11 emulation in linux-user is a little odd, and
arguably "correct" behaviour there would be to exactly match a real
Linux kernel's FPA11 emulation. However FPA11 emulation is
essentially dead at this point and so it seems better to continue
with QEMU's current behaviour and leave a comment describing the
situation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-4-peter.maydell@linaro.org
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
-----BEGIN PGP SIGNATURE-----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=vmIG
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu into staging
* Various bug fixes
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmcoEicACgkQZ7MCdqhi
# HK5M8Q//fz+ZkJndXkBjb1Oinx+q+eVtNm2JrvcWIsXyhG3K+6VxYPp69H+SRv/Z
# TWuUqMQPxq8mhQvBJlDAttp/oaUEiOcCRvs/iUoBN12L4mVxXfdoT88TZ4frN3eP
# 8bePq+DW2N/7gpmsJm5CyEZPpcf9AjVHgLRp3KYFkOJ/14uzvuwnocU39gl+2IUh
# MXHTedQgMNXaKorJXk1NVdM6NxMuVhOvwxAs6ya2gwhxyA5tteo5PiQOnDJWkejf
# xg3RRsNzGYcs1Qg/3kFIf3RfEB0aYbPxROM8IfPaJWKN5KnMggj/JAkHyK1x/V3J
# wml7+cB0doMt/yRiuYJhXpyrtOqpvjRWPA6RhxECWW2kwrovv8NAF8IrFnw9NvOQ
# QC66ZaaFcbAcFrVT1e/iggU76d01II6m4OAgKcXw+FRHgps4VU9y83j7ApNnNUWN
# IXp9hkzoHi5VwX0FrG4ELUr2iEf1HASMvM8EZ/0AxzWj5iNtQB8lFsrEdaGVXyIS
# M5JaJeNjCn4koCyYaFSctH5eKtbzIwnGWnDcdTwaOuQ+9itBvY8O+HZalE6sAc5S
# kLFZ7i/Ut/qxbY5pMumt8LKD4pR1SsOxFB8dJCmn/f/tvRGtIVsoY6btNe4M0+24
# 42MxZbWO6W379C32bwbtsPiGA+aLSgShjP4cWm9cgRjz4RJFnwg=
# =vmIG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 00:15:35 GMT
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu: (67 commits)
MAINTAINERS: Remove myself as reviewer
MAINTAINERS: Remove myself from XIVE
MAINTAINERS: Remove myself from the PowerNV machines
hw/ppc: Consolidate ppc440 initial mapping creation functions
hw/ppc: Consolidate e500 initial mapping creation functions
tests/qtest: Add XIVE tests for the powernv10 machine
pnv/xive2: TIMA CI ops using alternative offsets or byte lengths
pnv/xive2: TIMA support for 8-byte OS context push for PHYP
pnv/xive: Update PIPR when updating CPPR
pnv/xive: Add special handling for pool targets
ppc/xive2: Support "Pull Thread Context to Odd Thread Reporting Line"
ppc/xive2: Change context/ring specific functions to be generic
ppc/xive2: Support "Pull Thread Context to Register" operation
ppc/xive2: Allow 1-byte write of Target field in TIMA
ppc/xive2: Dump the VP-group and crowd tables with 'info pic'
ppc/xive2: Dump more NVP state with 'info pic'
pnv/xive2: Support for "OS LGS Push" TIMA operation
ppc/xive2: Support TIMA "Pull OS Context to Odd Thread Reporting Line"
pnv/xive2: Define OGEN field in the TIMA
pnv/xive: TIMA patch sets pre-req alignment and formatting changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZyXbXgAKCRBAov/yOSY+
37a9BADZ7vI2idWNXdH+mLNDZNSOxfdKp6ggNgKS3S48Hi2zR72MEhwvR9dGlHDL
98agrbV7/jI9Z+0dLAxvlyl1MvXfnn2sXYgUuZp6IAaQzFBa11HBAK7UFh3sTA4A
gD4oPwl8AdJiFvDN6vNjS+dO0ls+j/YMaoLkAKLv15dlWtg4Rw==
=EZnr
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241102' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241102
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZyXbXgAKCRBAov/yOSY+
# 37a9BADZ7vI2idWNXdH+mLNDZNSOxfdKp6ggNgKS3S48Hi2zR72MEhwvR9dGlHDL
# 98agrbV7/jI9Z+0dLAxvlyl1MvXfnn2sXYgUuZp6IAaQzFBa11HBAK7UFh3sTA4A
# gD4oPwl8AdJiFvDN6vNjS+dO0ls+j/YMaoLkAKLv15dlWtg4Rw==
# =EZnr
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 02 Nov 2024 07:57:18 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241102' of https://gitlab.com/gaosong/qemu:
target/loongarch: Add steal time support on migration
hw/loongarch/boot: Use warn_report when no kernel filename
linux-headers: Update to Linux v6.12-rc5
linux-headers: loongarch: Add kvm_para.h
linux-headers: Add unistd_64.h
target/loongarch/kvm: Implement LoongArch PMU extension
target/loongarch: Implement lbt registers save/restore function
target/loongarch: Add loongson binary translation feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Historically, the registration of sprs have been inherited alongwith
every new Power arch support being added leading to a lot of code
duplication. It's time to do necessary cleanups now to avoid further
duplication with newer arch support being added.
Signed-off-by: Harsh Prateek Bora <harshb@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
ppc_excp_apply_ail has multiple if-checks for ail which is un-necessary.
Combine them as appropriate.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As previously done for arch specific handlers, simplify var usage in
ppc_next_unmasked_interrupt by caching the env->pending_interrupts and
env->spr[SPR_LPCR] in local vars and using it later at multiple places.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Like p8 and p9, simplifying p7 exception handling rotuines to avoid
un-necessary multiple indirect accesses to env->pending_interrupts and
env->spr[SPR_LPCR].
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Most of the p8 exception handling accesses env->pending_interrupts and
env->spr[SPR_LPCR] at multiple places. Passing it directly as local
variables simplifies the code and avoids multiple indirect accesses.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently, p9 exception handling has multiple if-condition checks where
it does an indirect access to pending_interrupts and LPCR via env.
Pass the values during entry to avoid multiple indirect accesses.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The second if-condition can be true only if the first one above is true.
Enclose the latter into the former to avoid un-necessary check if first
condition fails.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cache env->spr[SPR_POWER_MMCR0] in a local variable as used in multiple
conditions to avoid multiple indirect accesses.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
hreg_compute_hflags_value already stores msr locally to be used in most
of the logic in the routine however some instances are still using
env->msr which is unnecessary. Use locally stored value as available.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add CPU target code to add support for new Power11 Processor.
Power11 core is same as Power10, hence reuse functions defined for
Power10.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power11 has the same PCR (Processor Compatibility Register) value, as
Power10.
Due to this, QEMU considers Power11 as a valid compat-mode for Power10,
ie. earlier it was possible to run QEMU with
'-M pseries,max-compat-mode=power11 --cpu power10'
Same PCR also introduced a regression where `-M pseries --cpu power10`
boots as Power11 (ie. logical PVR is of Power11, even though PVR is
Power10). The regression was due to 'do_client_architecture_support'
checking for valid compat modes and finding Power11 to be a valid compat
mode for Power10 (it happens even without passing 'max-compat-mode'
explicitly).
Fix compat-mode issue and regression, by ensuring a future Power
processor (with a higher logical_pvr value, eg. P11) cannot be valid
compat-mode for an older Power processor (eg. P10)
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce 'PnvChipClass::spapr_logical_pvr' to know corresponding logical
PVR of a PowerPC CPU.
This helps to have a one-to-one mapping between PVR and logical PVR for
a CPU, and used in a later commit to handle cases where PCR of two
generations of Power chip is same, which causes regressions with
compat-mode.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
