Do not store return of get_image_size() in a uint32_t as it makes it
impossible to detect error returns from get_image_size.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
acpi table file can be modified during load so file size check
should be more strict.
pointer calculation should be after qemu_realloc(). not before realloc().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
in_sg[].iovec and out_sg[].ioved are pointer to (source) host memory and
therefore invalid after migration. When loading the device state we must
create a new mapping on the destination host.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Separate the mapping of requests to host memory from the descriptor iteration.
The next patch will make use of it in a different context.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
https://bugs.launchpad.net/bugs/611646
reports that ./i386-softmmu/qemu -M isapc segfaults.
This patch fixes the segfault introduced by
f885f1eaa8
It's because i440fx_state in pc_init1() isn't initialized.
> Core was generated by `./i386-softmmu/qemu -M isapc'.
> Program terminated with signal 11, Segmentation fault.
> [New process 19686]
> at qemu/hw/piix_pci.c:136
> (gdb) where
> at qemu/hw/piix_pci.c:136
> boot_device=0x7fffe1f5b040 "cad", kernel_filename=0x0,
> kernel_cmdline=0x6469bf "", initrd_filename=0x0,
> cpu_model=0x654d10 "486", pci_enabled=0)
> at qemu/hw/pc_piix.c:178
> boot_device=0x7fffe1f5b040 "cad", kernel_filename=0x0,
> kernel_cmdline=0x6469bf "", initrd_filename=0x0, cpu_model=0x654d10 "486")
> at qemu/hw/pc_piix.c:207
> envp=0x7fffe1f5b188)
> at qemu/vl.c:2871
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Combining bitwise AND and logical NOT is suspicious.
Fixed by this Coccinelle script:
// From http://article.gmane.org/gmane.linux.kernel/646367
@@ expression E1,E2; @@
(
!E1 & !E2
|
- !E1 & E2
+ !(E1 & E2)
)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We can't use the return value of load_uimage() for the kernel because it
can't account for BSS size, and the PowerPC kernel does not relocate
blobs before zeroing BSS.
Instead, we now load at the fixed addresses chosen by u-boot (the normal
firmware for the board).
Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
The PowerPC 4xx SDRAM controller emulation unregisters RAM in its reset
callback. However, qemu_system_reset() is now called at initialization
time, so all RAM is unregistered before starting the guest (!).
Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
The message "Truncating memory to %d MiB to fit SDRAM controller limits"
should be displayed only when a user chooses an amount of RAM which
can't be represented by the PPC 4xx SDRAM controller (e.g. 129MB, which
would only be valid if the controller supports a bank size of 1MB).
Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
On KVM for PPC we need to tell the guest which instructions to use when
doing a hypercall. The clean way to do this is to go through an ioctl
from userspace and passing it on to the guest using the device tree.
So let's do the qemu part here: read out the hypercall and pass it on
to the guest's fw_cfg so openBIOS can read it out and expose it again.
Signed-off-by: Alexander Graf <agraf@suse.de>
Changing block.h or blockdev.h resulted in recompiling most objects.
Move DriveInfo typedef and BlockInterfaceType enum definitions
to qemu-common.h and rearrange blockdev.h use to decrease churn.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Old versions of the BOCHs VGA BIOS (cira 2003) made use of VBE
registers at 0xff80/81. In VBE API version 0xb0c2 these were
moved to 0x1ce/cf. Unfortunately, QEMU still registers handlers
for the old range. If a guest attempts to assign an I/O device
overlapping this region, QEMU exits with a hw_error. Windows
guests seem to like to assign I/O devices to the high end of
the address space, so it's pretty easy to hot add an rtl8139
to a Win2k8 guest and trigger the bug. I can't find any reason
to register these handlers, so let's remove the cruft.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Free malloc'ed memory, unregister from savevm and clean up virtio-common
bits on device hot-unplug.
This was found performing a migration after device hot-unplug.
Reported-by: <lihuang@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I have a guest OS which sends the command 0xfd to the keyboard
controller during initialization. To get rid of the message
"qemu: unsupported keyboard cmd=0x%02x\n" I added support for
the pulse output bit commands.
I found the following explanation here:
http://www.win.tue.nl/~aeb/linux/kbd/scancodes-11.html#ss11.3
Command 0xf0-0xff: Pulse output bit
Bits 3-0 of the output port P2 of the keyboard controller may
be pulsed low for approximately 6 µseconds. Bits 3-0 of this
command specify the output port bits to be pulsed. 0: Bit should
be pulsed. 1: Bit should not be modified. The only useful version
of this command is Command 0xfe.
(For MCA, replace 3-0 by 1-0 in the above.)
Command 0xfe: System reset
Pulse bit 0 of the output port P2 of the keyboard controller.
This will reset the CPU.
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace a qemu_malloc call, followed by a memset, with qemu_mallocz.
Found with this Coccinelle semantic patch, adapted from
Coccinelle test package rule 94:
@@
type T;
expression x;
expression E;
@@
- x = (T)qemu_malloc(E)
+ x = qemu_mallocz(E)
...
(
- memset(x,0,E);
|
- memset(x,0,sizeof(*x));
)
Some files (tests/*) had to be filtered out.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to scc_escc_um.pdf:
- Reset Highest IUS must update irq status to allow processing
of the next priority interrupt.
- rx interrupt has always higher priority than tx on same channel
The documentation only explicitly says that Reset Highest IUS
command (0x38) clears IUS bits, not that it clears the corresponding
interrupt too, so don't clear interrupts on this command.
The patch allows SunOS 4.1.4 to use the serial ports
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
resend for bug fix related to removal of irqfd
Support an inter-vm shared memory device that maps a shared-memory object as a
PCI device in the guest. This patch also supports interrupts between guest by
communicating over a unix domain socket. This patch applies to the qemu-kvm
repository.
-device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]
Interrupts are supported between multiple VMs by using a shared memory server
by using a chardev socket.
-device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]
[,chardev=<id>][,msi=on][,ioeventfd=on][,vectors=n][,role=peer|master]
-chardev socket,path=<path>,id=<id>
The shared memory server, sample programs and init scripts are in a git repo here:
www.gitorious.org/nahanni
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A non-migratable device should be removed before migration and re-added after.
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The reason for not actually canceling the I/O is because with
virtualization and lots of VM running, a guest fs may mistake a
overload of the host, as an IDE timeout. So rather than canceling the
I/O, it's safer to wait I/O completion and simulate that the I/O has
completed just before the io cancellation was requested by the
guest. This way if ntfs or an app writes data without checking for
-EIO retval, and it thinks the write has succeeded, it's less likely
to run into troubles. Similar issues for reads.
Furthermore because the DMA operation is splitted into many synchronous
aio_read/write if there's more than one entry in the SG table, without this
patch the DMA would be cancelled in the middle, something we've no idea if it
happens on real hardware too or not. Overall this seems a great risk for zero
gain.
This approach is sure safer than previous code given we can't pretend all guest
fs code out there to check for errors and reply the DMA if it was completed
partially, given a timeout would never materialize on a real harddisk unless
there are defective blocks (and defective blocks are practically only an issue
for reads never for writes in any recent hardware as writing to blocks is the
way to fix them) or the harddisk breaks as a whole.
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The timer #0 is the system timer, so the timer #num_cpu is the
timer of the last CPU, and it must be initialized in slavio_timer_reset.
Don't mark non-existing timers as running.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This header is not present on my system and causes a build
failure, but is also not used in these files, so remove it.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Removing dead code. Above we already continued when
rom->addr + valuegreaterthan0 < addr so this condition is always false.
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Currently virtio-serial supports a maximum of 31 ports. Specifying the
'max_ports' parameter to be > 31 on the cmd line causes badness.
Ensure we initialise virtio-serial only if max_ports is within the
supported range.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'for-anthony' of git://repo.or.cz/qemu/kevin:
Fix -snapshot deleting images on disk change
block: Use error codes from lower levels for error message
block: default to 0 minimal / optiomal I/O size
move 'unsafe' to end of caching modes in help
virtio-blk: Create exit function to unregister savevm
block migration: propagate return value when bdrv_write() returns < 0
ide/atapi: add support for GET EVENT STATUS NOTIFICATION
Fix the following warnings:
/src/qemu/hw/ide/core.c: In function `ide_drive_pio_post_load':
/src/qemu/hw/ide/core.c:2767: warning: comparison is always false due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c: In function `tight_detect_smooth_image':
/src/qemu/ui/vnc-enc-tight.c:284: warning: comparison is always true due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c:297: warning: comparison is always true due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c: In function `tight_encode_indexed_rect16':
/src/qemu/ui/vnc-enc-tight.c:456: warning: comparison is always false due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c: In function `tight_encode_indexed_rect32':
/src/qemu/ui/vnc-enc-tight.c:457: warning: comparison is always false due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It reintroduces
Revert "ide save/restore pio/atapi cmd transfer fields and io buffer"
but using subsections. Added bonus is the addition of ide_dummy_transfer_stop
to transfer_end_table, that was missing.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds subsections for each device section.
Subsections is the way to handle information that don't need to be sent
to de destination of a migration because its values are not needed. It is
the way to handle optional information. Notice that only the source can
decide if the information is optional or not. The destination needs to
understand all subsections that it receives to have a sucessful load.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit ed487bb1d6.
The conflicts are due to commit 4fc8d6711a
that is a fix to the ide_drive_pre_save() function. It reverts both
(and both are reinstantiated later in the series)
Conflicts:
hw/ide/core.c
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Otherwise we can't migrate after we've removed a virtio block device.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The GET EVENT STATUS NOTIFICATION is a mandatory command according
to MMC-3, even if event status notification is not supported.
This patch adds support for this command. It returns NEA ("No Event
Available") with an empty "Supported Event Classes" to show that it
doesn't event support status notification. If asychronous operation is
requested, which requires NCQ support, it returns an error according
to the specifications.
This fixes HAL support on FreeBSD and derivatives, which fill up the
logs every second with:
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x20 ascq=0x00
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some SW drivers dont keep track of what they've written and
depend on the HW latching write contents for later
read+modify+write sequences.
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
Commit 36388314fe moved most of the
interrupt logic to cpu-exec.c. Remove the remaining useless code
and fix software interrupts.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Edgar E. Iglesias <edgar@axis.com>
Tested-by: Edgar E. Iglesias <edgar@axis.com>
When hw interrupt pending bits in CP0_Cause are set, the CPU should
see the hw interrupt line as active. The CPU may or may not take the
interrupt based on internal state (global irq mask etc) but the glue
logic shouldn't care.
This fixes MIPS external hw interrupts in combination with -icount.
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
Remove pci_{register, unregister}_secondary_bus() by open code.
They are old stype API and aren't used any more by others. So eliminate it.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid confusion of primary bus with secondary bus,
rename PCIBridge::bus to PCIBridge::sec_bus.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move pci bridge related code into pci_bridge.c from pci.c
for further enhancement. pci.c is big enough now, so split it out.
No code change but exporting some accesser functions.
In fact, few pci bridge functions stays in pci.c.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The request completion callback of the LSI controller may start the next
request that can use the same tag as the completed one. As the latter is
still enqueued at that point, scsi_send_command will complain about the
tag reuse and cancel the completed request. That will cause a double
free later on when the completion path cleans up as well.
Fix this by dequeuing the request before invoking the callback.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This change fixes initialization of e1000's microwire EEPROM internal
state values so that qemu's e1000 emulation works on NetBSD,
which doesn't use Intel's em driver but has its own wm driver
for the Intel i8254x Gigabit Ethernet.
Previously set_eecd() function in e1000.c clears EEPROM internal state
values on SK rising edge during CS==L, but according to FM93C06 EEPROM
(which is MicroWire compatible) data sheet, EEPROM internal status
should be cleared on CS rise edge regardless of SK input:
"... a rising edge on this (CS) signal is required to reset the internal
state-machine to accept a new cycle .."
and nothing should be changed during CS (chip select) is inactive.
Intel's em driver seems to explicitly raise SK output after CS is negated
in em_standby_eeprom() so many other OSes that use Intel's driver
don't have this problem even on the previous e1000.c implementation,
but I can't find any articles that say the MICROWIRE or EEPROM spec
requires such sequence, and actually hardware works fine without it
(i.e. real i82540EM has been working on NetBSD).
This fix also changes initialization to clear each state value in
struct eecd_state individually rather than using memset() against
the whole structre. The old_eecd member stores the last SK and CS
signal levels and it should be preserved even after reset of internal
EEPROM state to detect next signal edges for proper EEPROM emulation.
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Starting with qemu -M pc-0.12 -device virtio-serial
results in
-device virtio-serial: Property 'virtio-serial-pci.max_nr_ports' not found
The property name 'max_ports' is incorrectly named 'max_nr_ports'. Fix
that.
Also fix the ppc440 machine type bamboo-0.12 which has this typo.
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use empty_slot to reserve addresses for several unimplemented devices so they won't fault.
- BPP (parallel port), DBRI (audio), SX (pixel processor), and vsimms (framebuffer)
OBP for SS-20 either assumes these devices exist or probes without expecting faults.
Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
move out pci internal structures, PCIBus, PCIBridge and pci_bus_info into
private header file, pci_internals.h.
This is a preparation. Later pci bridge implementation will be
split out form pci.c into pci_bridge.c.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We need to know ring layout to allocate log buffer.
So init rings first.
Also fixes a theoretical memory-leak-on-error.
https://bugzilla.redhat.com/show_bug.cgi?id=615228
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
We do range check for size, and get size as buffer,
but copy size + 4 bytes (4 is for FCS).
Let's copy size bytes but put size + 4 in length.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disks without media make no sense. For SCSI, a Linux guest kernel
complains during boot. I didn't try other combinations.
scsi-generic doesn't need the additional check, because it already
requires bdrv_is_sg(), which fails without media.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the check from virtio_blk_init_pci(), where it protects only
virtio-blk-pci, to virtio_blk_init(). Without that, virtio-blk-s390
initializes without a drive. I figure that can lead to null pointer
dereferences.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It can't actually fail now, but the next commit will change that.
s390_virtio_blk_init() already checks for failure, but
virtio_blk_init_pci() doesn't. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In addition to the previous fix for calling do_flush_queued_data() only
when the virtqueue is ready, ensure do_flush_queued_data() gets a vq
that's suitably initialised.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a virtio-serial port is removed before the guest comes up and
initialises the virtqueues, qemu exits with the message
Guest moved used index from 0 to 61440
This happens because we try to clear any pending buffers from the
virtqueue.
Ensure the virtqueue is initialised before calling any virtqueue
operations.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While running in debug mode if 9P server is unable to open the log file
it results in a SEGV deep down in glibc:
Program received signal SIGSEGV, Segmentation fault.
0x008fca8c in fwrite () from /lib/libc.so.6
(gdb) bt
#0 0x008fca8c in fwrite () from /lib/libc.so.6
#1 0x081eb87e in pprint_pdu (pdu=0x89a52e1c)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-9p-debug.c:380
#2 0x0806dad8 in submit_pdu (s=0x897dc008, pdu=0x89a52e1c)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-9p.c:3092
#3 0x0806dc63 in handle_9p_output (vdev=0x897dc008, vq=0x86d8218)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-9p.c:3122
#4 0x081ac728 in virtio_queue_notify (vdev=0x897dc008, n=0)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio.c:563
#5 0x08063876 in virtio_ioport_write (opaque=0x86d7b98, addr=16, val=0)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-pci.c:222
#6 0x08063e26 in virtio_pci_config_writew (opaque=0x86d7b98, addr=16, val=0)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-pci.c:357
#7 0x080c881a in ioport_write (index=1, address=49296, data=0) at ioport.c:80
#8 0x080c8d4c in cpu_outw (addr=49296, val=0) at ioport.c:204
#9 0x08073010 in kvm_handle_io (port=49296, data=0xab393000, direction=1, size=2, count=1)
at /data/sripathi/code/qemu/new/qemu-next-upstream/kvm-all.c:735
...
...
This is ugly and misleading. The following patch adds a BUG_ON to catch this
error. With this patch we get an abort message like the following, which makes
it easier to analyze:
f12-kvm login: qemu: /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-9p-debug.c:353: pprint_pdu: Assertion `!(!llogfile)' failed.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
No need to call cpu_register_physical_memory() for a zero sized area.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The file, vt82c686.c, was added after the change set of
b80d4a9887 and
fecb93c45c
are created, but before the patch series was commit.
So similar fix is needed to vt82c686.c.
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We were requesting too much when checking buffer
length: size already includes host header length.
Further, we should not exit if we get a packet that
is too long, since this might not be under control
of the guest. Just drop the packet.
Red Hat bz 591494
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
make pci hotplug callback return value to caller.
And when returning error, allocated resources are freed.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make init value for this register match the spec.
BAR address is 0 at init, so enabling it
only works by chance.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcnet enables memory/io on init, which
does not make sense as BAR values are wrong.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Clear interrupt disable bit on reset, according to PCI spec.
Fix pci_device_reset() with 64bit BAR.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Intel Macs have a chip called the "AppleSMC" which they use to control
certain Apple specific parts of the hardware, like the keyboard background
light.
That chip is also used to store a key that Mac OS X uses to decrypt binaries.
This patch adds emulation for that chip, so we're getting one step further
to having Mac OS X run natively on Qemu.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Set PCI multi-function bit according to multifunction property.
PCI address, devfn ,is exported to users as addr property,
so users can populate pci function(PCIDevice in qemu)
at arbitrary devfn.
It means each function(PCIDevice) don't know whether pci device
(PCIDevice[8]) is multi function or not.
So this patch allows user to set multifunction bit via property
and checks whether multifunction bit is set correctly.
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
make pci bridge aware of pci multi function property and let pci generic
code to set the bit.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
use pci_create_simple_multifunction() for normal device which sets
multifunction bit.
At the moment, only pc_piix.c and mips_malta.c uses multifunction
devices with piix3/4 pci-isa bridge.
And other boards don't populate those devices.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
introduce multifunction property.
Also introduce new convenient device creation function which
will be used later.
For bisectability this patch doesn't do anything, but sets the property
resulting in no functional changes.
Actual changes will be introduced by later patch.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
replace PCIDeviceInfo::header_type with is_bridge
as suggested by Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't overwrite pci header type.
Otherwise, multi function bit which pci_init_header_type() sets
appropriately is lost.
Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero
which is already zero cleared.
how to test:
run qemu and issue info pci to see whether a device in question is
normal device, not pci-to-pci bridge.
This is handy because guest os isn't required.
tested changes:
The following files are covered by using following commands.
sparc64-softmmu
apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c
ppc-softmmu
grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c
ppc-softmmu -M mac99
unin_pci.c(uni-north, uni-north-agp)
ppc64-softmmu
pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp)
x86_64-softmmu
acpi_piix4.c, ide/piix.c, piix_pci.c
-vga vmware vmware_vga.c
-watchdog i6300esb wdt_i6300esb.c
-usb usb-uhci.c
-sound ac97 ac97.c
-nic model=rtl8139 rtl8139.c
-nic model=pcnet pcnet.c
-balloon virtio virtio-pci.c:
untested changes:
The following changes aren't tested.
prep_pci.c: ppc-softmmu -M prep should cover, but core dumped.
unin_pci.c(uni-north-pci): the caller is commented out.
openpic.c: the caller is commented out in ppc_prep.c
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Auto-assigned-address pci function (passing devfn = -1) is always
single function.
This patch adds assert() to guarantee that auto-assigned-address function
is always single function device at function = 0.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use PCI_DEVFN() and PCI_FUNC_MAX where appropriate.
This patch make it clear that func = 0.
test:
The following object files with/without this patch are stripped and compared.
They remains same.
arm-softmmu/versatile_pci.o
libhw32/ppce500_pci.o
libhw32/unin_pci.o
libhw64/ppce500_pci.o
libhw64/unin_pci.o
mips-softmmu/gt64xxx.o
mips64-softmmu/gt64xxx.o
mips64el-softmmu/gt64xxx.o
mipsel-softmmu/gt64xxx.o
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yu Liu <yu.liu@freescale.com>
Cc: Paul Brook <paul@codesourcery.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These will be used to generate unique id strings for ramblocks. The name
field is required, the device pointer is optional as most callers don't
have a device. When there's no device or the device isn't a child of
a bus implementing BusInfo.get_dev_path, the name should be unique for
the platform.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stuff a pointer to the DeviceState into the VirtIONet structure so that
we can easily remove the vmstate entry later. Also, let vmstate track
the instance number (it should always be zero internally since the
device path should now be unique).
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows us to create a more meaningful savevm string.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When available, we'd like to be able to access the DeviceState
when registering a savevm. For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This works great for PCI since a <segment>:<bus>:<dev>.<fn> uniquely
describes a global address. No need to traverse up the qdev tree.
PCI segment support is a placeholder for compatibility once we
support multiple segments.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This function is meant to provide a stable device path for buses
which are able to implement it. If a bus has a globally unique
addresses scheme, one address level may be sufficient to provide
a path. Other buses may need to recursively traverse up the
qdev tree.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will benefit us when we migrate based on ramblock name since
we won't be bouncing between separate blocks.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Convert alarm time from BCD if needed before comparing with current
time.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the controller raises the SCSI reset line, we have to perform the
requested reset on all disks attached to the controller's bus. Moreover,
reset is edge triggered, so avoid repeating it if the line was already
high.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
drive_init() doesn't permit invalid CHS for if=ide, but that's
worthless: we get it via if=none and -device.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_init() doesn't permit option readonly for if=ide, but that's
worthless: we get it via if=none and -device.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It still always succeeds. The next commits will add failures.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The two aren't independent variables. Make that obvious.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use error_report(), because it points to the error location.
Reword "tried to assign twice" messages to make it clear that we're
complaining about the unit property.
Report invalid unit property instead of failing silently.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_init() doesn't permit rerror for if=scsi, but that's worthless:
we get it via if=none and -device.
Moreover, scsi-generic doesn't support werror. Since drive_init()
doesn't catch that, option werror was silently ignored even with
if=scsi.
Wart: unlike drive_init(), we don't reject the default action when
it's explicitly specified. That's because we can't distinguish "no
rerror option" from "rerror=report", or "no werror" from
"rerror=enospc". Left for another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some of the failures are internal errors, and hw_error() is okay then.
But the common way to fail is bad user input, e.g. -global
isa-fdc.driveA=foo where drive foo has an unsupported rerror value.
exit(1) instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_init() doesn't permit them for if=floppy, but that's worthless:
we get them via if=none and -global.
This can make device initialization fail. Since all callers of
fdctrl_init_isa() ignore its value, change it to die instead of
returning failure. Without this, some callers would ignore the
failure, and others would crash.
Wart: unlike drive_init(), we don't reject the default action when
it's explicitly specified. That's because we can't distinguish "no
rerror option" from "rerror=report", or "no werror" from
"rerror=enospc". Left for another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the final missing bits for support of
passing a serial/id string to a virtio-blk guest driver.
The guest-side component already exists in the virtio
driver, and has recently been reworked by Ryan to export
a /sys interface for retrieval of the id from guest userland.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drives defined with -drive if=ide get get created along with the IDE
controller, inside machine->init(). That's before cmos_init().
Drives defined with -device get created during generic device init.
That's after cmos_init(). Because of that, CMOS has no information on
them (type, geometry, translation). Older versions of Windows such as
XP reportedly choke on that.
Split off the part of CMOS initialization that needs to know about
-device devices, and turn it into a reset handler, so it runs after
device creation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriverState member removable controls whether virtual media
change (monitor commands change, eject) is allowed. It is set when
the "type hint" is BDRV_TYPE_CDROM or BDRV_TYPE_FLOPPY.
The type hint is only set by drive_init(). It sets BDRV_TYPE_FLOPPY
for if=floppy. It sets BDRV_TYPE_CDROM for media=cdrom and if=ide,
scsi, xen, or none.
if=ide and if=scsi work, because the type hint makes it a CD-ROM.
if=xen likewise, I think.
For the same reason, if=none works when it's used by ide-drive or
scsi-disk. For other guest devices, there are problems:
* fdc: you can't change virtual media
$ qemu [...] -drive if=none,id=foo,... -global isa-fdc.driveA=foo
QEMU 0.12.50 monitor - type 'help' for more information
(qemu) eject foo
Device 'foo' is not removable
unless you add media=cdrom, but that makes it readonly.
* virtio: if you add media=cdrom, you can change virtual media. If
you eject, the guest gets I/O errors. If you change, the guest sees
the drive's contents suddenly change.
* scsi-generic: if you add media=cdrom, you can change virtual media.
I didn't test what that does to the guest or the physical device,
but it can't be pretty.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo
happily creates two SCSI disks connected to the same block device.
It's all downhill from there.
Device usb-storage deliberately attaches twice to the same blockdev,
which fails with the fix in place. Detach before the second attach
there.
Also catch attempt to delete while a guest device model is attached.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the property point to BlockDriverState, cutting out the DriveInfo
middleman. This prepares the ground for block devices that don't have
a DriveInfo.
Currently all user-defined ones have a DriveInfo, because the only way
to define one is -drive & friends (they go through drive_init()).
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device. I'm
working towards a new way to define block devices, with clean
host/guest separation, and I need to get DriveInfo out of the way for
that.
Fortunately, the device models are perfectly happy with
BlockDriverState, except for two places: ide_drive_initfn() and
scsi_disk_initfn() need to check the DriveInfo for a serial number set
with legacy -drive serial=... Use drive_get_by_blockdev() there.
Device model code should now use DriveInfo only when explicitly
dealing with drives defined the old way, i.e. without -device.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We automatically delete blockdev host parts on unplug of the guest
device. Too much magic, but we can't change that now.
The delete happens early in the guest device teardown, before the
connection to the host part is severed. Thus, the guest part's
pointer to the host part dangles for a brief time. No actual harm
comes from this, but we'll catch such dangling pointers a few commits
down the road. Clean up the dangling pointers by delaying the
automatic deletion until the guest part's pointer is gone.
Device usb-storage deliberately makes two qdev properties refer to the
same drive, because it automatically creates a second device. Again,
too much magic we can't change now. Multiple references worked okay
before, but now free_drive() dies for the second one. Zap the extra
reference.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers of ide_create_drive() ignore its value. Currently
harmless, because it fails only when qdev_init() fails, which fails
only when ide_drive_initfn() fails, which never fails.
Brittle. Change it to die instead of silently ignoring failure.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
None of its callers checks for failure. scsi_hot_add() can crash
because of that:
(qemu) drive_add 4 if=scsi,format=host_device,file=/dev/sg1
scsi-generic: scsi generic interface too old
Segmentation fault (core dumped)
Fix all callers, not just scsi_hot_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
scanf calls must not use PRI constants, they have probably the wrong size and
corrupt memory. We could replace them by SCN ones, but strtol is simpler than
scanf here anyway. While at it, also fix the parsers to reject garbage after
the number ("4096xyz" was accepted before).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Richard Henderson <rth@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The commit 8e65b7c049 introduced
expire_time of UHCIState. But expire_time is not in vmstate, the
second uhci_frame_timer will not be fired immediately after loadvm.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For all i, ports_map[i] is used in and only in the i-th iteration.
Replace the dynamic array by a scalar variable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
lsi_bad_phase has a bug in the choice of pmjad1/pmjad2. This does
not matter with Linux guests because it uses just one routine for
both, but it breaks Windows 64-bit guests. This is the text
from the spec:
"[The PMJCTL] bit controls which decision mechanism is used
when jumping on phase mismatch. When this bit is cleared the
LSI53C895A will use Phase Mismatch Jump Address 1 (PMJAD1) when
the WSR bit is cleared and Phase Mismatch Jump Address 2 (PMJAD2)
when the WSR bit is set. When this bit is set the LSI53C895A will
use jump address one (PMJAD1) on data out (data out, command,
message out) transfers and jump address two (PMJAD2) on data in
(data in, status, message in) transfers."
Which means:
CCNTL0.PMJCTL
0 SCNTL2.WSR = 0 PMJAD1
0 SCNTL2.WSR = 1 PMJAD2
1 out PMJAD1
1 in PMJAD2
In qemu, what you get instead is:
CCNTL0.PMJCTL
0 out PMJAD1
0 in PMJAD2 <<<<<
1 out PMJAD1
1 in PMJAD1 <<<<<
Considering that qemu always has SCNTL2.WSR cleared, the two marked cases
(corresponding to phase mismatch on input) are always jumping to the
wrong PMJAD register. The patch implements the correct semantics.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The MASTER_DISABLE bit (aka mask-all) masks all the interrupts.
According to Sun-4M System Architecture
"The level–15 interrupt sources [...] are maskable with the Interrupt Target
Mask Register. While these interrupts are considered ’non–maskable’ within
the SPARC IU, a mask capability is provided to allow the boot firmware
to establish a basic environment before receiving any level–15 interrupts,
which are non–maskable within SPARC. A mask–all bit is provided to allow
disabling of all external interrupts during change of the CIT."
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
System architecture dictates whether HAS_AUDIO is defined. It's then
useless to check for HAS_AUDIO in files which are only used on those
architectures which always have audio.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The comment suggests we're checking for the driver in the ready
state and bus master disabled, but the code is checking that it's
not in the ready state.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Found-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Mapped mode stores extended attributes in the user space of the extended
attributes. Given that the user space extended attributes are available
to regular files only, special files are created as regular files on the
fileserver and appropriate mode bits are added to the extended attributes.
This method presents all special files and symlinks as regular files on the
fileserver while they are represented as special files on the guest mount.
On Host/Fileserver:
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:36 afifo
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:32 blkdev
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:33 chardev
On Guest/Client:
prw-r--r-- 1 guestuser guestuser 0 2010-05-11 12:36 afifo
brw-r--r-- 1 guestuser guestuser 0, 0 2010-05-11 12:32 blkdev
crw-r--r-- 1 guestuser guestuser 4, 5 2010-05-11 12:33 chardev
In the passthrough securit model, specifal files are directly created
on the fileserver. But the user credential
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Mapped mode stores extended attributes in the user space of the extended
attributes. Given that the user space extended attributes are available
to regular files only, special files are created as regular files on the
fileserver and appropriate mode bits are added to the extended attributes.
This method presents all special files and symlinks as regular files on the
fileserver while they are represented as special files on the guest mount.
Implemntation of symlink in mapped security model:
A regular file is created and the link target is written to it.
readlink() reads it back from the file.
On Guest/Client:
lrwxrwxrwx 1 root root 6 2010-05-11 12:20 asymlink -> afile
On Host/Fileserver:
-rw-------. 1 root root 6 2010-05-11 09:20 asymlink
afile
Under passthrough model, it just calls underlying symlink() readlink()
system calls are used.
Under both security models, client user credentials are changed
after the filesystem objec creation.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the mapped security model, VirtFS server intercepts and maps
the file object create and get/set attribute requests. Files on the fileserver
will be created with VirtFS servers (QEMU) user credentials and the
client-users credentials are stored in extended attributes. On the request
to get attributes, server extracts the client-users credentials
from extended attributes and sends them to the client.
On Host/Fileserver:
-rw-------. 2 virfsuid virtfsgid 0 2010-05-11 09:19 afile
On Guest/Client:
-rw-r--r-- 2 guestuser guestuser 0 2010-05-11 12:19 afile
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
mapped model changes the owner in the extended attributes.
passthrough model does the change through lchown() as the
server don't need to follow the link and client will send the
actual filesystem object.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds required infrastructure for the new security model.
- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new option is:
-fsdev fstype,id=myid,path=/share_path/,security_model=[mapped|passthrough]
-virtfs fstype,path=/share_path/,security_model=[mapped|passthrough],mnt_tag=tag
In the case of mapped security model, files are created with QEMU user
credentials and the client-user's credentials are saved in extended attributes.
Whereas in the case of passthrough security model, files on the
filesystem are directly created with client-user's credentials.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch rearranges the fileop structures by moving the structure definitions
from virtio-9p.c to virtio-9p.h file. No functional changes.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fluesh the debug messages to the log file at the end of each
debug message.
Changes from V1:
Used fflush instead fseek for the flush.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Although it is really rare to get in to the while loop, the list
operation in the loop is obviously wrong.
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch updates hw/scsi-bus.c to add MAINTENANCE_IN and MAINTENANCE_OUT case in
scsi_req_length() for TYPE_ROM with MMC commands. It also adds the MAINTENANCE_OUT
case in scsi_req_xfer_mode() to set SCSI_XFER_TO_DEV for outgoing write data.
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch updates hw/scsi-bus.c to add the PERSISTENT_RESERVE_OUT cdb
case in scsi_req_xfer_mode() to set SCSI_XFER_TO_DEV for outgoing WRITE data.
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make APICState completely private to apic.c by using DeviceState
in external APIs.
Move apic_init() to pc.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Convert to qdev.
Use an opaque CPUState pointer because of missing VMState
implementation for CPUState.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move the actual CPUState contents handling to cpu.h and cpuid.c.
Handle CPU reset and set env->halted in pc.c.
Add a function to get the local APIC state of the current
CPU for the MMIO.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Comparing an 8 bit value with ~0 does not work as expected.
Replace ~0 by UINT8_MAX in comparison and also in assignment
(and fix coding style, too).
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: malc <av1474@comtv.ru>
Correct definitions for FD_CMD_SAVE and FD_CMD_RESTORE in hw/fdc.c
Per https://bugs.launchpad.net/qemu/+bug/424453 the correct values
for FD_CMD_SAVE is 0x2e and FD_CMD_RESTORE is 0x4e. Verified against
the Intel 82078 manual which can be found at:
http://wiki.qemu.org/Documentation/HardwareManuals page 22.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
That's where they belong semantically (block device host part), even
though the actions are actually executed by guest device code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
PCI hotplug currently doesn't work after a migration because
we don't migrate the enable bits of the GPE state. Pull hotplug
structs into vmstate.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Setting the ID in pci_nic_init() is a blatant violation of the
DeviceState abstraction. Which even carries a comment advising
against this:
/* This structure should not be accessed directly. We declare it here
so that it can be embedded in individual device state structures. */
What's worse, it bypasses the code ensuring unique qdev IDs: "-device
virtio-net-pci,id=foo -net nic,id=foo -net nic,name=foo" happily
creates three qdevs with ID "foo". That's because qdev relies on
qemu_opts_create() to ensure unique IDs, but -net nic uses a different
QemuOptsList, which means id is in a different namespace. And its
name is not checked for uniqueness at all.
-net nic and pci_add are legacy. Use -device and device_add if you
want a NIC with a qdev ID.
This reverts what's still left of commit eb54b6dc "qdev: add id=
support for pci nics."
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When mistakenly configuring two devices in the same PCI slot,
QEMU gives a not entirely obvious message about a 'devfn' being
in use:
$ qemu -device rtl8139 -device virtio-balloon-pci,bus=pci.0,addr=0x3
qemu-kvm: -device virtio-balloon-pci,bus=pci.0,addr=0x3: PCI: devfn 24 not available for virtio-balloon-pci, in use by rtl8139
The user does not configure 'devfn' numbers, they use slot+function.
Thus the error messages should be reported back to the user with that
same terminology rather than the internal QEMU terminology. This
patch makes it report:
$ qemu -device rtl8139 -device virtio-balloon-pci,bus=pci.0,addr=0x3
qemu: -device virtio-balloon-pci,bus=pci.0,addr=0x3.7: PCI: slot 3 function 0 not available for virtio-balloon-pci, in use by rtl8139
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Pass the MultiReqBuffer structure down all the way to the I/O submission
instead of takin it apart. Also mark num_writes unsigned as it can't
go negative, and take the check for any pending I/O requests into the
submission function. Last but not least rename do_multiwrite to
virtio_submit_multiwrite to fit the general naming scheme and make clear
what it does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is a 1:1 relation between VirtIOBlock and BlockDriverState instances,
no need to track it because it won't change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a USB keyboard is unplugged, the keyboard eventhandler is never
removed, and events will continue to be passed through to the device,
causing crashes or memory corruption.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently HPET ACPI table is created regardless of whether qemu actually
created hpet device. This may confuse some guests that don't check that
hpet is functional before using it. Solve this by passing info about
hpets in qemu to seabios via fw config interface. Additional benefit is
that seabios no longer uses hard coded hpet configuration. Proposed
interface supports up to 8 hpets. This is the number defined by hpet
spec.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The capability register is read-only from guest POV, so we do not need
to update it on reset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Change #define DEBUG to #define E1000_DEBUG in hw/e1000.c to make
it possible to build QEMU with -DDEBUG
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove unused DEBUG defines from hw/msix.c to avoid having anything
define the word DEBUG without any additions such as MSIX_DEBUG.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This implements the HPET capability of routing IRQs to the front-side
bus, aka MSI support. This feature can be enabled via the qdev property
"msi" and is off by default.
Note that switching it on can cause guests (at least Linux) to use the
HPET as timer instead of the LAPIC. KVM users should recall that only
the latter is currently available as fast in-kernel model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
One HPET block supports up to 32 timers. Allow to instantiate more than
the recommended and implemented minimum of 3. The number is configured
via the qdev property "timers". It is also saved/restored so that it
need not match between migration peers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
By implementing this feature we can also remove a nasty way to kill qemu
(by trying to enable level-triggered hpet interrupts).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instead of keeping a static reference around, pass the state to
hpet_enabled and hpet_get_ticks. All callers now have it at hand. Will
once allow to instantiate the HPET more than a single time.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Allow the intercept the RTC IRQ for the HPET legacy mode. Then push
routing to IRQ8 completely into the HPET. This allows to turn
hpet_in_legacy_mode() into a private function. Furthermore, this stops
the RTC from clearing IRQ8 even if the HPET is in control.
This patch comes with a side effect: The RTC timers will no longer be
stoppend when there is no IRQ consumer, possibly causing a minor
performance degration. But as the guest may want to redirect the RTC to
the SCI in that mode, it should normally disable unused IRQ source
anyway.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We have to update the qemu timer when the per-timer enable bit is
toggled, just like for HPET_CFG_ENABLE changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Register the HPET as a sysbus device and create it that way. As it can
route its IRQs to any ISA IRQ, we need to connect it to all 24 of them.
Once converted to qdev, we can move reset handler and vmstate
registration into its hands as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Properly initialize HPETTimer::tn and HPETTimer::state once during
hpet_init instead of (re-)writing them on every reset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Setting the main counter while the HPET is enabled may not be a good
idea of the guest, but it is supported and should, thus, not spam the
host console with warnings.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This moves the private HPET structures into the C module, simplifies
some helper functions and fixes most coding style issues (biggest chunk
was improper switch-case indention). No functional changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Also prevent out-of-bounds write access to the timers but don't spam the
host console if it triggers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
42f1ced228 removed irq lowering
during reset. However, for chip reset command and DMA reset signal,
its actually the correct thing to do.
Lower IRQ on soft reset only.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
BusState::name is allocated in qbus_create_inplace().
So it should be freed by qbus_free().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch fixes the following compilation errors in multiboot.c
when DEBUG_MULTIBOOT is defined.
Use TARGET_FMT_plx instead of %x for target_phys_addr_t.
CC i386-softmmu/multiboot.o
cc1: warnings being treated as errors
qemu/hw/multiboot.c: In function 'mb_add_mod':
qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 4 has type 'target_phys_addr_t'
qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t'
qemu/hw/multiboot.c: In function 'load_multiboot':
qemu/hw/multiboot.c:279: error: format '%#x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t'
qemu/hw/multiboot.c:307: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t'
qemu/hw/multiboot.c:308: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t'
make[1]: *** [multiboot.o] Error 1
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
virtio net attempts to peek into virtio queue to
determine that we have enough space for the complete
packet to fit. However, it fails to account for space
consumed by virtio net header when it does this,
under stress this results in a failure
with the message 'truncating packet'.
redhat bz 591494.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Anything that moves hundreds of lines out of vl.c can't be all bad.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Show the actual default value instead of <null> when the property has
not been set.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It needs to be a qdev property, because it belongs to the drive's
guest part.
Bonus: info qtree now shows the serial number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Show the actual default value instead of <null> when the property has
not been set.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It needs to be a qdev property, because it belongs to the drive's
guest part.
Bonus: info qtree now shows the serial number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
parse_string() qemu_strdup()s the property value. It is never freed.
It needs to be freed along with the device. Otherwise, the value of
scsi-disk property "ver" gets leaked when hot-unplugging the disk, for
instance.
Call new PropertyInfo method free() from qdev_free(). Implement it
for qdev_prop_string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
IDEState members drive_serial_str and version are now left empty until
an actual drive is connected. Before, they got a default value that
was overwritten when a drive got connected. Doesn't matter, because
they're used only while a drive is connected.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 428c149b added IDEState member conf to let commit 0009baf1 find
the BlockConf from there. It exists only for qdev drives, created via
ide_drive_initfn(), not for drives created via ide_init2().
But for a qdev drive, we can just as well reach its IDEDevice, which
contains the BlockConf. Do that, and revert the parts of commit
428c149b that add IDEState member conf.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clean up virtio-blk.c to be more consistent using BDRV_SECTOR_SIZE
instead of hard coded 512 values.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vhost net currently keeps running after vmstop,
which causes trouble as qemy does not check
for dirty pages anymore.
The fix is to simply keep vm and vhost running/stopped
status in sync.
Tested-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previous commit added QMP documentation to the qemu-monitor.hx
file, it's is a copy of this information.
While it's good to keep it near code, maintaining two copies of
the same information is too hard and has little benefit as we
don't expect client writers to consult the code to find how to
use a QMP command.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix for too small allocation to ports_map
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Booting an arm kernel has been broken a while when booting from non zero start
address. This is due to the order of events: board init loads the kernel and
sets register 15 to the start address and then qemu_system_reset reset the cpu
making register 15 zero again.
This patch fixes the usage of the register 15 start address trick in
combination with arm_load_kernel.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
add helper function which converts root bus to pci domain.
make them aware of pci domain.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
remove defines which are already defined in pci_regs.h
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So remove unused constants,
PCI_STATUS_RESERVED_MASK_LO, PCI_STATUS_RESERVED_MASK_HI,
PCI_COMMAND_RESERVED, PCI_COMMAND_RESERVED_MASK_HI.
They were used once, but they aren't used anymore.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
add const to pci_is_express(), pci_config_size().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use pci accessor function.
don't return value because it always return 0 and
the caller doesn't check the return value.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a DPRINTF macro. Use TARGET_FMT_plx for printing target_phys_addr_t
items. Add a separate flag for debugging coalescing interrupts.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
On the real hardware (SS-5, LX) the MMU is not padded, but aliased.
Software shouldn't use aliased addresses, neither should it crash
when it uses (on the real hardware it wouldn't). Using empty_slot
instead of aliasing can help with debugging such accesses.
Signed-off-by: Artyom Tarasenko <atar4qemu@googlemail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use TARGET_FMT_plx as format placeholder for target_phys_addr_t
Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reset is now triggered after init, no need for explicit calls anymore.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The ram_size parameter can be larger than an int, so it may be truncated.
Fix by using the correct type.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix build failure introduced by 0bfcd599e3
The format statement expects unsigned long on x86_64, but receives
unsigned long long, so gcc exits with an error.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- remove unused host state and store pci bus pointer only
- do not map host state access into unused 1fe.10000000 range
- reorder pci region registration
- assign pci i/o region to isa_mem_base
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
hw/virtio-net.h:
#define ETH_ALEN 6
ETH_ALEN was defined by commit 7967406801
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes a mismerge of 64d564094c (wrong
patch version): We need to mask the tag value properly to obtain its
device ID.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On a real hardware changing read-only bits has no effect
Use a mask common for SCSI and Ethernet registers. The crucial
bit is DMA_INTR, because setting or clearing it may produce
spurious interrupts.
This patch allows booting Solaris 2.3
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cirrus_post_load() will be executed twice when loading vm states and then the
wrong physical memory will be registered. This issue may lead to crash qemu.
Signed-off-by: TeLeMan <geleman@gmail.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In oneshot mode, the delta needs to come from the TimerLoad register,
not the maximum limit.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reload the timer when TimerControl is written, if the timer is to be
enabled. Otherwise, if an earlier write to TimerLoad was done while
periodic mode was not set, s->delta may incorrectly still have the value
of the maximum limit instead of the value written to TimerLoad.
This problem is evident on versatileap on current linux-next, which
enables TIMER_CTRL_32BIT before writing to TimerLoad and then enabling
periodic mode and starting the timer. This causes the first periodic
tick to be scheduled to occur after 0xffffffff periods, leading to a
perceived hang while the kernel waits for the first timer tick.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support to read manufacturer and device ID. For everything else (eg.
lock bits) 0 is returned.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Before issuing the barrier to the block driver we need to flush our oustanding
queue of write requests, as the flush is supposed to be issued after them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VirtIOBlockRequest structure is about 40 KB in size. This patch
avoids zeroing every request by only initializing fields that are read.
The other fields are either written to or may not be used at all.
Oprofile shows about 10% of CPU samples in memset called by
virtio_blk_alloc_request(). The workload is
dd if=/dev/vda of=/dev/null iflag=direct bs=8k running concurrently 4
times. This patch makes memset disappear to the bottom of the profile.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 3d53f5c36f introduced a segfault by erroneously making fw_cfg a
'void **' and passing it around in different ways.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We don't want pci_del in QMP. Use device_del instead.
This reverts commit 6848d82716.
Conflicts:
hw/pci-hotplug.c
sysemu.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Short story: We don't want pci_add in QMP. Long story follows.
pci_add can do two things:
* Hot plug a PCI NIC. device_add is more general.
* Hot plug a PCI disk controller, and a drive connected to it.
The controller is either virtio-blk-pci (if=virtio) or lsi53c895a
(if=scsi). With the latter, the drive is optional. Use drive_add to
hotplug additional SCSI drives. Except drive_add is not available in
QMP.
device_add is more general for controllers and the guest part of
drives. I'm working on a more general alternative for the host part
of drives.
Why am I proposing to remove pci_add from QMP before its replacement is
ready? I want it out sooner rather than later, because it isn't fully
functional (errors and drive_add are missing), and we do not plan to
complete the job. In other words, it's not really usable over QMP now,
and it's not what we want for QMP anyway. Since we don't want it to be
used over QMP, we should take it out, not leave it around as a trap for
the uninitiated.
Dan Berrange confirmed that libvirt has no need for pci_add & friends
over QMP.
This reverts commit 7a344f7ac7.
Conflicts:
hw/pci-hotplug.c
sysemu.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This function had been disabled from the beginning:
see 9fddaa0c0c
cpu_reset() function is in target-ppc/helper.c
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds a firmware blob to the S390 target. The blob is a simple
implementation of a virtio client that tries to read the second stage
bootloader from sectors described as of offset 0x20 in the MBR.
In combination with an updated zipl this allows for booting from virtio
block devices. This firmware is built from the same sources as the second
stage bootloader. You can find a virtio capable s390-tools in this repo:
git://repo.or.cz/s390-tools.git
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When cancelling a request, bdrv_aio_cancel may decide that it waits for
completion of a request rather than for cancellation. IDE therefore can't
abandon its DMA status before calling bdrv_aio_cancel; otherwise the callback
of a completed request would use invalid data.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
remove global variables, gpe and pci0_status by moving them
into PIIX4PMState.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add argument, DeviceState*, to pci hot plug callback.
The argument will be used later to remove global variable.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice
instead of RTCState.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Finally, we can safely split out the piix specific part from pc.c
into pc_piix.c.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split out pci device initialization from pc_init1() into pc_pci_device_init().
and removed unnecessary braces.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split out basic device, i.e. legacy devices like floppy, initialization
from pc_init1() into pc_basic_device_init().
Later it will be used.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split out vga initialization which is independent of piix
from pc_init1() as pc_vga_init().
Later it will be used.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split out memory allocation and rom/bios loading which doesn't depend
on piix from pc_init1() into pc_memory_init().
Later it will be used.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
split out cpu initialization which is piix independent from pc_init1()
into pc_cpus_init(). Later it will be used.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
By introducing a registering function, make pc_init1() not refer to
ferr_irq directly in order to make ferr_irq piix independent.
Later pc_init1() will be split out into another file keeping ferr_irq
static.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce a function, pc_allocate_cpu_irq(), to allocate cpu irq
in order to make pic_irq_request() piix independent.
Later piix code will be split out to another file keeping pic_irq_request()
static.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove the reference to the global variable, rtc_state, by passing
function argument to cmos_init_hd(), cmos_init().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Paolo Bonzini <bonzini@gnu.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove a global variable, floppy_controller.
Since it is unnecessarily global, make it local and pass it as
a function argument.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
make cpu_smm_update() generic to be independent on i440fx by
registering a callback.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The changeset of 2c8d934020
prevents isa_irq_handler() from NULL refering of IsaIrqState::ioapic.
However it would be better to initialize the member before reference.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split acpi.c into the common part and the piix4 specific part.
The common part will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
add acpi constants from linux header files and
replace the old constants with them.
The acpi constants will be used by other file.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split out apm register emulation for acpi.c into apm.c.
The apm emulation will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split out piix4 smbus routines from acpi.c into pm_smbus.c and
use it.
The split out smbus emulation will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
After defining the required alias ID, we can push vmstate registration
of mc146818rtc to qdev.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Establish vmstate containers for ISA and sysbus variant, define the
iobase as instance ID alias, and let qdev do the vmstate registration
work.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
At least for isa-serial, we can already let qdev do the vmstate
registration for us. It just takes wrapping vmstate for the
encapsulating ISASerialState and defining the proper instance ID
aliases.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
