pci_new() aborts when creating a VF with a function number equals to or
is greater than PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-5-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device gets automatically unrealized when being unparented.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-4-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The renamed state will not only represent powering state of PFs, but
also represent SR-IOV VF enablement in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-1-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Store the aliased bus and devfn in the HostIOMMUDevice.
This will be useful to handle info that are iommu group
specific and not device specific (such as reserved
iova ranges).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
pci_device_[set|unset]_iommu_device() call pci_device_get_iommu_bus_devfn()
to get iommu_bus->iommu_ops and call [set|unset]_iommu_device callback to
set/unset HostIOMMUDevice for a given PCI device.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Extract out pci_device_get_iommu_bus_devfn() from
pci_device_iommu_address_space() to facilitate
implementation of pci_device_[set|unset]_iommu_device()
in following patch.
No functional change intended.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
+jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
=C0UU
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
# 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
# +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
# uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
# 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
# 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
# =C0UU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits)
docs/specs/pvpanic: document shutdown event
hw/cxl: Fix missing reserved data in CXL Device DVSEC
hmat acpi: Fix out of bounds access due to missing use of indirection
hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory.
qemu-options.hx: Document the virtio-iommu-pci aw-bits option
hw/arm/virt: Set virtio-iommu aw-bits default value to 48
hw/i386/q35: Set virtio-iommu aw-bits default value to 39
virtio-iommu: Add an option to define the input range width
virtio-iommu: Trace domain range limits as unsigned int
qemu-options.hx: Document the virtio-iommu-pci granule option
virtio-iommu: Change the default granule to the host page size
virtio-iommu: Add a granule property
hw/i386/acpi-build: Add support for SRAT Generic Initiator structures
hw/acpi: Implement the SRAT GI affinity structure
qom: new object to associate device to NUMA node
hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it
hw/i386/pc: Set "normal" boot device order in pc_basic_device_init()
hw/i386/pc: Avoid one use of the current_machine global
hw/i386/pc: Remove "rtc_state" link again
Revert "hw/i386/pc: Confine system flash handling to pc_sysfw"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
Call pcie_sriov_pf_reset() from pci_do_device_reset() just as we do
for msi_reset() and msix_reset() to prevent duplicating code for each
SR-IOV PF.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-5-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
The spec does not NumVFs is reset after disabling VFs except when
resetting the PF. Clearing it is guest visible and out of spec, even
though Linux doesn't rely on this value being preserved, so we never
noticed.
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-4-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcie_sriov_pf_disable_vfs() is called when resetting the PF, but it only
disables VFs and does not reset SR-IOV extended capability, leaking the
state and making the VF Enable register inconsistent with the actual
state.
Replace pcie_sriov_pf_disable_vfs() with pcie_sriov_pf_reset(), which
does not only disable VFs but also resets the capability.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-3-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
The guest may write NumVFs greater than TotalVFs and that can lead
to buffer overflow in VF implementations.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2024-26327
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-2-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
This patch extends the PCIe link speed option so that slots can be
configured as supporting 32GT/s (Gen5) or 64GT/s (Gen5) speeds.
This is as simple as setting the appropriate bit in LnkCap2 and
the appropriate value in LnkCap and LnkCtl2.
Signed-off-by: Lukas Stockner <lstockner@genesiscloud.com>
Message-Id: <20240215012326.3272366-1-lstockner@genesiscloud.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add trace-events that may help to debug problems with hotplugging.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240301154146.761531-2-vsementsov@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Similarly to the restriction in hw/pci/msix.c (see commit
e1e4bf2252 "msix: fix msix_vector_masked"), restrict the
xen_is_pirq_msi() call in msi_is_masked() to Xen.
No functional change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-7-philmd@linaro.org>
This function is no longer used, as all its callers have been converted
to use pci_init_nic_devices() instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The loop over nd_table[] to add PCI NICs is repeated in quite a few
places. Add a helper function to do it.
Some platforms also try to instantiate a specific model in a specific
slot, to match the real hardware. Add pci_init_nic_in_slot() for that
purpose.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Switch the PCI bus from using BusClass::reset to the Resettable
interface.
This has no behavioural change, because the BusClass code to support
subclasses that use the legacy BusClass::reset will call that method
in the hold phase of 3-phase reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240119163512.3810301-2-peter.maydell@linaro.org
CONFIG_ALL is tricky to use and was ported over to Meson from the
recursive processing of Makefile variables. Meson sourcesets
however have all_sources() and all_dependencies() methods that
remove the need for it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the rollback in msix_set_vector_notifiers(), original patch forgot to
undo msix_vector_poll_notifier pointer.
Fixes: bbef882cc1 ("msi: add API to get notified about pending bit poll")
Signed-off-by: Robert Hoo <robert.hoo.linux@gmail.com>
Message-Id: <20231113081349.1307-1-robert.hoo.linux@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
g_new() aborts if the allocation fails so it returns NULL only if the
requested allocation size is zero. register_vfs() makes such an
allocation if NumVFs is zero so it should not assert that g_new()
returns a non-NULL value.
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Buglink: https://issues.redhat.com/browse/RHEL-17209
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231123075630.12057-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Yanghang Liu<yanghliu@redhat.com>
Reviewed-by: Cédric Le Goater <<a href="mailto:clg@redhat.com" target="_blank">clg@redhat.com</a>><br>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch modifies pci_setup_iommu() to set PCIIOMMUOps
instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to
get an address space for a PCI device in vendor specific
way. The PCIIOMMUOps still offers this functionality. But
using PCIIOMMUOps leaves space to add more iommu related
vendor specific operations.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[ clg: - refreshed on latest QEMU
- included hw/remote/iommu.c
- documentation update
- asserts in pci_setup_iommu()
- removed checks on iommu_bus->iommu_ops->get_address_space
- included Elroy PCI host (PA-RISC) ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This are the easiest cases, where we were already using
VMSTATE_INSTANCE_ID_ANY.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-3-quintela@redhat.com>
Fix:
hw/pci/pci.c:504:54: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
MemoryRegion *address_space_io,
^
hw/pci/pci.c:533:38: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
MemoryRegion *address_space_io,
^
hw/pci/pci.c:543:40: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
MemoryRegion *address_space_io,
^
hw/pci/pci.c:590:45: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
MemoryRegion *address_space_io,
^
include/exec/address-spaces.h:35:21: note: previous declaration is here
extern AddressSpace address_space_io;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231010115048.11856-6-philmd@linaro.org>
local_err must be NULL before calling object_property_set_bool(), so we
must clear it on each iteration. Let's also use more convenient
error_reportf_err().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230925194040.68592-8-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
current code sets PCI_SEC_LATENCY_TIMER to RW, but for
pcie to pcie bridges it must be RO 0 according to
pci express spec which says:
This register does not apply to PCI Express. It must be read-only
and hardwired to 00h. For PCI Express to PCI/PCI-X Bridges, refer to the
[PCIe-to-PCI-PCI-X-Bridge] for requirements for this register.
also, fix typo in comment where it's made writeable - this typo
is likely what prevented us noticing we violate this requirement
in the 1st place.
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <de9d05366a70172e1789d10591dbe59e39c3849c.1693432039.git.mst@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PCI_COMMAND register is located at offset 4 within
the PCI configuration space and occupies 2 bytes. The
interrupt disable bit is at the 10th bit, which corresponds
to the byte at offset 5 in the PCI configuration space.
In our testing environment, the guest driver may directly
updates the byte at offset 5 in the PCI configuration space.
The backtrace looks like as following:
at hw/pci/pci.c:1442
at hw/virtio/virtio-pci.c:605
val=5, len=1) at hw/pci/pci_host.c:81
In this situation, the range_covers_byte function called
by the pci_default_write_config function will return false,
resulting in the inability to handle the interrupt disable
update event.
To fix this issue, we can use the ranges_overlap function
instead of range_covers_byte to determine whether the interrupt
bit has been updated.
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Signed-off-by: yuanminghao <yuanmh12@chinatelecom.cn>
Message-Id: <ce2d0437-8faa-4d61-b536-4668f645a959@chinatelecom.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: b6981cb57b ("pci: interrupt disable bit support")
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2224964
In migration with VF failover, Windows guest and ACPI hot
unplug we do not need to satisfy config requests, otherwise
the guest immediately detects the device and brings up its
driver. Many network VF's are stuck on the guest PCI bus after
the migration.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20230728084049.191454-1-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change is cosmetic. A comment is added explaining why we need to check for
the availability of function 0 when we hotplug a device.
CC: mst@redhat.com
CC: mjt@tls.msk.ru
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It is useful to extend the number of available PCIe devices to KVM guests
for passthrough scenarios and also to expose these models to a different
(big endian) architecture. Introduce a new config PCIE_DEVICES to select
models, Intel Ethernet adapters and one USB controller. These devices all
support MSI-X which is a requirement on s390x as legacy INTx are not
supported.
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230712080146.839113-1-clg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current implementers of ARI are all SR-IOV devices. The ARI next
function number field is undefined for VF according to PCI Express Base
Specification Revision 5.0 Version 1.0 section 9.3.7.7. The PF still
requires some defined value so end the linked list formed with the field
by specifying 0 as required for any ARI implementation according to
section 7.8.7.2.
For migration, the field will keep having 1 as its value on the old
QEMU machine versions.
Fixes: 2503461691 ("pcie: Add some SR/IOV API documentation in docs/pcie_sriov.txt")
Fixes: 44c2c09488 ("hw/nvme: Add support for SR-IOV")
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230710153838.33917-3-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the only implementers of ARI is SR-IOV devices, and they
behave similar. Share the ARI next function number.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230710153838.33917-2-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When trying to migrate a machine type pc-q35-6.0 or lower, with this
cmdline options,
-device driver=pcie-root-port,port=18,chassis=19,id=pcie-root-port18,bus=pcie.0,addr=0x12 \
-device driver=nec-usb-xhci,p2=4,p3=4,id=nex-usb-xhci0,bus=pcie-root-port18,addr=0x12.0x1
the following bug happens after all ram pages were sent:
qemu-kvm: get_pci_config_device: Bad config data: i=0x6e read: 0 device: 40 cmask: ff wmask: 0 w1cmask:19
qemu-kvm: Failed to load PCIDevice:config
qemu-kvm: Failed to load pcie-root-port:parent_obj.parent_obj.parent_obj
qemu-kvm: error while loading state for instance 0x0 of device '0000:00:12.0/pcie-root-port'
qemu-kvm: load of migration failed: Invalid argument
This happens on pc-q35-6.0 or lower because of:
{ "ICH9-LPC", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" }
In this scenario, hotplug_handler_plug() calls pcie_cap_slot_plug_cb(),
which sets dev->config byte 0x6e with bit PCI_EXP_SLTSTA_PDS to signal PCI
hotplug for the guest. After a while the guest will deal with this hotplug
and qemu will clear the above bit.
Then, during migration, get_pci_config_device() will compare the
configs of both the freshly created device and the one that is being
received via migration, which will differ due to the PCI_EXP_SLTSTA_PDS bit
and cause the bug to reproduce.
To avoid this fake incompatibility, there are tree fields in PCIDevice that
can help:
- wmask: Used to implement R/W bytes, and
- w1cmask: Used to implement RW1C(Write 1 to Clear) bytes
- cmask: Used to enable config checks on load.
According to PCI Express® Base Specification Revision 5.0 Version 1.0,
table 7-27 (Slot Status Register) bit 6, the "Presence Detect State" is
listed as RO (read-only), so it only makes sense to make use of the cmask
field.
So, clear PCI_EXP_SLTSTA_PDS bit on cmask, so the fake incompatibility on
get_pci_config_device() does not abort the migration.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215819
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20230706045546.593605-3-leobras@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
PCIe downstream ports only have a single device 0, so PCI Express devices can
only be plugged into slot 0 on a PCIe port. Add a warning to let users know
when the invalid configuration is used. We may enforce this more strongly later
once we get more clarity on whether we are introducing a bad regression for
users currently using the wrong configuration.
The change has been tested to not break or alter behaviors of ARI capable
devices by instantiating seven vfs on an emulated igb device (the maximum
number of vfs the igb device supports). The vfs are instantiated correctly
and are seen to have non-zero device/slot numbers in the conventional PCI BDF
representation.
CC: jusual@redhat.com
CC: imammedo@redhat.com
CC: mst@redhat.com
CC: akihiko.odaki@daynix.com
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128929
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20230705115925.5339-6-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
pci_new() automatically retains a reference to a virtual function when
registering it so we need to release the reference when unregistering.
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230411090408.48366-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
There is also pci_new() which creates non-multifunction PCI devices.
Accordingly the parameter is always set to true when a multi function PCI
device is to be created.
The reason for the parameter's existence seems to be that it is used in the
internal PCI code as well which is the only location where it gets set to
false. This one usage can be resolved by factoring out an internal helper
function.
Remove this redundant, error-prone parameter.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230304114043.121024-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is also pci_create_simple() which creates non-multifunction PCI
devices. Accordingly the parameter is always set to true when a multi
function PCI device is to be created.
The reason for the parameter's existence seems to be that it is used in the
internal PCI code as well which is the only location where it gets set to
false. This one usage can be replaced by trivial code.
Remove this redundant, error-prone parameter.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230304114043.121024-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a macro to avoid copy and pasting strings which can easily
cause typos.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230630073720.21297-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Report the PCIe capability version for a device
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Robin Voetter <robin@streamhpc.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
On incoming migration we have the following sequence to load option
ROM:
1. On device realize we do normal load ROM from the file
2. Than, on incoming migration we rewrite ROM from the incoming RAM
block. If sizes mismatch we fail, like this:
Size mismatch: 0000:00:03.0/virtio-net-pci.rom: 0x40000 != 0x80000: Invalid argument
This is not ideal when we migrate to updated distribution: we have to
keep old ROM files in new distribution and be careful around romfile
property to load correct ROM file. Which is loaded actually just to
allocate the ROM with correct length.
Note, that romsize property doesn't really help: if we try to specify
it when default romfile is larger, it fails with something like:
romfile "efi-virtio.rom" (160768 bytes) is too large for ROM size 65536
Let's just ignore ROM file when romsize is specified and we are in
incoming migration state. In other words, we need only to preallocate
ROM of specified size, local ROM file is unrelated.
This way:
If romsize was specified on source, we just use same commandline as on
source, and migration will work independently of local ROM files on
target.
If romsize was not specified on source (and we have mismatching local
ROM file on target host), we have to specify romsize on target to match
source romsize. romfile parameter may be kept same as on source or may
be dropped, the file is not loaded anyway.
As a bonus we avoid extra reading from ROM file on target.
Note: when we don't have romsize parameter on source command line and
need it for target, it may be calculated as aligned up to power of two
size of ROM file on source (if we know, which file is it) or,
alternatively it may be retrieved from source QEMU by QMP qom-get
command, like
{ "execute": "qom-get",
"arguments": {
"path": "/machine/peripheral/CARD_ID/virtio-net-pci.rom[0]",
"property": "size" } }
Note: we have extra initialization of size variable to zero in
pci_add_option_rom to avoid false-positive
"error: ‘size’ may be used uninitialized"
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230522201740.88960-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When calling pci_bus_irqs() multiple times on the same object without calling
pci_bus_irqs_cleanup() in between PCIBus::irq_count[] is currently leaked.
Let's fix this because Xen will do just that in a few commits, and because
calling pci_bus_irqs_cleanup() in between seems fragile and cumbersome.
Note that pci_bus_irqs_cleanup() now has to NULL irq_count such that
pci_bus_irqs() doesn't do a double free.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230403074124.3925-3-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Since it's implementation on v8.0.0-rc0, having the PCI_ERR_UNCOR_MASK
set for machine types < 8.0 will cause migration to fail if the target
QEMU version is < 8.0.0 :
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10a read: 40 device: 0 cmask: ff wmask: 0 w1cmask:0
qemu-system-x86_64: Failed to load PCIDevice:config
qemu-system-x86_64: Failed to load e1000e:parent_obj
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:02.0/e1000e'
qemu-system-x86_64: load of migration failed: Invalid argument
The above test migrated a 7.2 machine type from QEMU master to QEMU 7.2.0,
with this cmdline:
./qemu-system-x86_64 -M pc-q35-7.2 [-incoming XXX]
In order to fix this, property x-pcie-err-unc-mask was introduced to
control when PCI_ERR_UNCOR_MASK is enabled. This property is enabled by
default, but is disabled if machine type <= 7.2.
Fixes: 010746ae1d ("hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20230503002701.854329-1-leobras@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1576
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230515125229.44836-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fix over-80 lines and missing curly brackets for if-operators, which
are required by QEMU coding style.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230515125229.44836-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
