Generally, both of these bits are cleared at the end of each
instruction. By separating these, we will be able to clear
both with a single insn, instead of 2 or 3.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Print both raw IAQ_Front and IAQ_Back as well as the GVAs.
Print control registers in system mode.
Print floating point registers if CPU_DUMP_FPU.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As with loads and stores, code offsets are kept intact until the
full gva is formed. In qemu, this is in cpu_get_tb_cpu_state.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for CF_PCREL. store the iaoq_f in 3 parts: high
bits in cs_base, middle bits in pc, and low bits in priv.
For iaoq_b, set a bit for either of space or page differing,
else the page offset.
Install iaq entries before goto_tb. The change to not record
the full direct branch difference in TB means that we have to
store at least iaoq_b before goto_tb. But since a later change
to enable CF_PCREL will require both iaoq_f and iaoq_b to be
updated before goto_tb, go ahead and update both fields now.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The kernel does this along the return path to user mode.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow an exception to be emitted at the end of the TranslationBlock,
leaving only the conditional branch inline. Use it for simple
exception instructions like break, which happen to be nullified.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we do not need to free tcg temporaries, the only
thing cond_free does is reset the condition to never.
Instead, simply write a new condition over the old, which
may be simply cond_make_f() for the never condition.
The do_*_cond functions do the right thing with c or cf == 0,
so there's no need for a special case anymore.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define all of the context dependent field definitions.
Use FIELD_EX32 and FIELD_DP32 with named fields instead
of extract32 and deposit32 with raw constants.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can directly test bits of a 32-bit comparison without
zero or sign-extending an intermediate result.
We can directly test bit 0 for odd/even.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can directly test bits of a 32-bit comparison without
zero or sign-extending an intermediate result.
We can directly test bit 0 for odd/even.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use 'v' for a variable that needs copying, 't' for a temp that
doesn't need copying, and 'i' for an immediate, and use this
naming for both arguments of the comparison. So:
cond_make_tmp -> cond_make_tt
cond_make_0_tmp -> cond_make_ti
cond_make_0 -> cond_make_vi
cond_make -> cond_make_vv
Pass 0 explictly, rather than implicitly in the function name.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a first step in enabling CF_PCREL, but for now
we regenerate the absolute address before writeback.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wrap offset and space together in one structure, ensuring
that they're copied together as required.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This simplifies callers, which might otherwise have
to make another copy.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using umax is clearer than the same operation using movcond.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This allows unification of BE, BLR, BV, BVE with a common helper.
Since we can now track space with IAQ_Next, we can now let the
TranslationBlock continue across the delay slot with BE, BVE.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move space assighments to a central location.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add variable to track space changes to IAQ. So far, no such changes
are introduced, but the new checks vs ctx->iasq_b may eliminate an
unnecessary copy to cpu_iasq_f with e.g. BLR.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Minimize the amount of code in hppa_tr_translate_insn advancing the
insn queue for the next insn. Move the goto_tb path to hppa_tr_tb_stop.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We no longer have to allocate a temp and perform an
addition before translation of the rest of the insn.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a common routine for writing the return address.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of two separate cpu_iaoq_entry calls, use one call to update
both IAQ_Front and IAQ_Back. Simplify with an argument combination
that automatically handles a simple increment from Front to Back.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The generic tcg driver will have already checked for breakpoints.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the function by not attempting a conditional move
on the branch destination -- just use nullify_over normally.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass a displacement instead of an absolute value.
In trans_be, remove the user-only do_dbranch case. The branch we are
attempting to optimize is to the zero page, which is perforce on a
different page than the code currently executing, which means that
we will *not* use a goto_tb. Use a plain indirect branch instead,
which is what we got out of the attempted direct branch anyway.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Share this check between gen_goto_tb and hppa_tr_translate_insn.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is for log_pc(), which needs to produce a
similar result to cpu_get_tb_cpu_state().
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG register spill/fill uses tcg_out_ld/st with all types,
not necessarily going through INDEX_op_{ld,st}_vec.
Cc: qemu-stable@nongnu.org
Fixes: 16288ded94 ("tcg/loongarch64: Lower basic tcg vec ops to LSX")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2336
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Previous commits replaced them by translator_ld* calls.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240405131532.40913-1-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ilen value extracted from ex_value is the length of the
EXECUTE instruction itself, and so is the increment to the pc.
However, the length of the synthetic insn is located in the
opcode like all other instructions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace translator_fake_ldb, which required multiple calls,
with translator_fake_ld, which can take all data at once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
