This flag for split instruction/data TLBs is only set for 6xx soft TLB
MMU model and not used otherwise so no need to have a separate flag
for that.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Remove mmu_ctx_t definition from internal.h as this type is only used
within mmu_common.c.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Now that only 6xx cases left in ppc_jumbo_xlate() we can change it
to ppc_6xx_xlate() also removing get_physical_address_wtlb().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce ppc_40x_xlate() to split off 40x handlning leaving only 6xx
in ppc_jumbo_xlate() now.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add ppc_real_mode_xlate() to handle real mode translation and allow
removing this case from ppc_jumbo_xlate().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Merge the code fetch and data access cases in a common switch.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move setting error_code that appears in every case out in front and
hoist the common fall through case for BOOKE206 as well which allows
removing the nested switches.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce ppc_booke_xlate() to handle BookE and BookE 2.06 cases to
reduce ppc_jumbo_xlate() further.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As BookE never returns -4 we can drop BookE from the direct store case
in ppc_jumbo_xlate().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmubooke206_get_physical_address() only uses the raddr and prot fields
from mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmubooke_get_physical_address() only uses the raddr and prot fields
from mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmu40x_get_physical_address() only uses the raddr and prot fields from
mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The "2" in booke206_update_mas_tlb_miss() call corresponds to
MMU_INST_FETCH which is the value of access_type in this branch;
mmubooke206_esr() only checks for MMU_DATA_STORE and it's called from
code access so using MMU_DATA_LOAD here seems wrong so replace it with
access_type here as well that yields the same result. This also makes
these calls the same as the data access branch further down.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of putting a large block of code in an if, invert the
condition and return early to be able to deindent the code block.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Fix several qemu_log_mask() calls that are misindented.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function just does two assignments and and unnecessary check that
is always true so inline it in the only caller left and remove it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The real mode handling is identical in the remaining switch cases.
Split off these common real mode cases into a separate conditional to
leave only the else branches in the switch that are different.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
BookE does not have real mode so split off and handle it first in
get_physical_address_wtlb() before checking for real mode for other
MMU models.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Return directly, which is simpler than dragging a return value through
multpile if and else blocks.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move the debug logging within ppc6xx_tlb_check() from after its only
call to simplify the caller.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() we have a large if block with a two
line else branch that effectively returns. Invert the condition and
move the else there to allow deindenting the large if block to make
the flow easier to follow.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Repurpose get_segment_6xx_tlb() to do the whole address translation
for POWERPC_MMU_SOFT_6xx MMU model by moving the BAT check there and
renaming it to match other similar functions. These are only called
once together so no need to keep these separate functions and
combining them simplifies the caller allowing further restructuring.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Drop MPC8xx cases from get_physical_address_wtlb() and ppc_jumbo_xlate().
The default case would still catch this and abort the same way and
there is still a warning about it in ppc_tlb_invalidate_all() which is
called in ppc_cpu_reset_hold() so likely we never get here but to make
sure add a case to ppc_xlate() to the same effect.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In get_physical_address_wtlb() the real_mode flag depends on either
the MSR[IR] or MSR[DR] bit depending on access_type. Extract just the
needed bit in a more straight forward way instead of doing unnecessary
computation.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmubooke_check_tlb() and mmubooke206_check_tlb() we can assign the
value of prot2 directly to the destination, no need to have a separate
local variable for it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmubooke_check_tlb() and mmubooke206_check_tlb() prot2 is
calculated first but only used after an unrelated check that can
return before tha value is used. Move the calculation after the check,
closer to where it is used, to keep them together and avoid computing
it when not needed.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The helper_rac function is defined but not used, remove it.
Fixes: 005b69fdcc (target/ppc: Remove PowerPC 601 CPUs)
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
I think it's use was removed by
Commit 5883d8b296 ("mmu-hash*: Don't use full ppc_hash{32,
64}_translate() path for get_phys_page_debug()")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
msgsnd has a broadcast mode that sends hypervisor doorbells to all
threads belonging to the same core as the target. A "subcore" mode
sends to all or one thread depending on 1LPAR mode.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This implements the POWER SPRC/SPRD SPRs, and SCRATCH0-7 registers that
can be accessed via these indirect SPRs.
SCRATCH registers only provide storage, but they are used by firmware
for low level crash and progress data, so this implementation logs
writes to the registers to help with analysis.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
LDBAR, TTR are a Power-specific SPRs. These simple implementations
are enough for IBM proprietary firmware for now.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
AMOR, MMCRC, HRMOR, TSCR, HMEER, RPR SPRs are per-core or per-LPAR
registers with simple (generic) implementations.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
An SPR can be either per-thread, per-core, or per-LPAR. Per-LPAR means
per-thread or per-core, depending on 1LPAR mode.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
PPR32 provides access to the upper half of PPR.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
attn is an implementation-specific instruction that on POWER (and G5/
970) can be enabled with a HID bit (disabled = illegal), and executing
it causes the host processor to stop and the service processor to be
notified. Generally used for debugging.
Implement attn and make it checkstop the system, which should be good
enough for QEMU debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Change the logging not to print to stderr as well, because a
checkstop is a guest error (or perhaps a simulated machine error)
rather than a QEMU error, so send it to the log.
Update the checkstop message, and log CPU registers too.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
checkstop state does not halt the system, interrupts continue to be
serviced, and other CPUs run. Make it stop the machine with
qemu_system_guest_panicked.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There is a memop_size() function for this.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use DEF_MEMOP() consistently in larx and stcx. generation, and apply it
once when it's used rather than where the macros are expanded, to reduce
typing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds migration support for Branch History Rolling
Buffer (BHRB) internal state.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for the clrbhrb and mfbhrbe instructions.
Since neither instruction is believed to be critical to
performance, both instructions were implemented using helper
functions.
Access to both instructions is controlled by bits in the
HFSCR (for privileged state) and MMCR0 (for problem state).
A new function, helper_mmcr0_facility_check, was added for
checking MMCR0[BHRBA] and raising a facility_unavailable exception
if required.
NOTE: For P8 and P9, due to a performance issue, branch history will
not be kept, but the instructions will be allowed to execute
as normal with the exception that the mfbhrbe instruction will
always return a zero value.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This commit continues adding support for the Branch History
Rolling Buffer (BHRB) as is provided starting with the P8
processor and continuing with its successors. This commit
is limited to the recording and filtering of taken branches.
The following changes were made:
- Enabled functionality on P10 processors only due to
performance impact seen with P8 and P9 where it is not
disabled for non problem state branches.
- Added a BHRB buffer for storing branch instruction and
target addresses for taken branches
- Renamed gen_update_cfar to gen_update_branch_history and
added a 'target' parameter to hold the branch target
address and 'inst_type' parameter to use for filtering
- Added TCG code to gen_update_branch_history that stores
data to the BHRB and updates the BHRB offset.
- Added BHRB resource initialization and reset functions
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This commit is preparatory to the addition of Branch History
Rolling Buffer (BHRB) functionality, which is being provided
today starting with the P8 processor.
BHRB uses several SPR register fields to control whether or not
a branch instruction's address (and sometimes target address)
should be recorded. Checking each of these fields with each
branch instruction using jitted code would lead to a significant
decrease in performance.
Therefore, it was decided that BHRB configuration bits that are
not expected to change frequently should have their state summarized
in an hflag so that the amount of checking done by jitted code can
be reduced.
This commit contains the changes for summarizing the state of the
following register fields in the HFLAGS_BHRB_ENABLE hflag:
MMCR0[FCP] - Determines if BHRB recording is frozen in the
problem state
MMCR0[FCPC] - A modifier for MMCR0[FCP]
MMCRA[BHRBRD] - Disables all BHRB recording for a thread
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
v{max, min}{u, s}{b, h, w, d} : VX-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
v{and, andc, nand, or, orc, nor, xor, eqv} : VX-form
The changes were verified by validating that the tcp ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
{l,st}ve{b,h,w}x,
{l,st}v{x,xl},
lvs{l,r} : X-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
andi[s]., {ori, xori}[s] : D-form
{and, andc, nand, or, orc, nor, xor, eqv}[.],
exts{b, h, w}[.], cnt{l, t}z{w, d}[.],
popcnt{b, w, d}, prty{w, d}, cmp, bpermd : X-form
With this patch, all the fixed-point logical instructions have been
moved to decodetree.
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
cmp{rb, eqb}, t{w, d} : X-form
t{w, d}i : D-form
isel : A-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also for CMPRB, following review comments :
Replaced repetition of arithmetic right shifting (tcg_gen_shri_i32) followed
by extraction of last 8 bits (tcg_gen_ext8u_i32) with extraction of the required
bits using offsets (tcg_gen_extract_i32).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
