Commit Graph

868 Commits

Author SHA1 Message Date
Cédric Le Goater
3aa597f650 spapr/xive: introduce a XIVE interrupt controller
sPAPRXive models the XIVE interrupt controller of the sPAPR machine.
It inherits from the XiveRouter and provisions storage for the routing
tables :

  - Event Assignment Structure (EAS)
  - Event Notification Descriptor (END)

The sPAPRXive model incorporates an internal XiveSource for the IPIs
and for the interrupts of the virtual devices of the guest. This model
is consistent with XIVE architecture which also incorporates an
internal IVSE for IPIs and accelerator interrupts in the IVRE
sub-engine.

The sPAPRXive model exports two memory regions, one for the ESB
trigger and management pages used to control the sources and one for
the TIMA pages. They are mapped by default at the addresses found on
chip 0 of a baremetal system. This is also consistent with the XIVE
architecture which defines a Virtualization Controller BAR for the
internal IVSE ESB pages and a Thread Managment BAR for the TIMA.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Fold in field accessor fixes]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:37:38 +11:00
Cédric Le Goater
cdd4de68ed ppc/xive: notify the CPU when the interrupt priority is more privileged
After the event data was enqueued in the O/S Event Queue, the IVPE
raises the bit corresponding to the priority of the pending interrupt
in the register IBP (Interrupt Pending Buffer) to indicate there is an
event pending in one of the 8 priority queues. The Pending Interrupt
Priority Register (PIPR) is also updated using the IPB. This register
represent the priority of the most favored pending notification.

The PIPR is then compared to the the Current Processor Priority
Register (CPPR). If it is more favored (numerically less than), the
CPU interrupt line is raised and the EO bit of the Notification Source
Register (NSR) is updated to notify the presence of an exception for
the O/S. The check needs to be done whenever the PIPR or the CPPR are
changed.

The O/S acknowledges the interrupt with a special load in the Thread
Interrupt Management Area. If the EO bit of the NSR is set, the CPPR
takes the value of PIPR. The bit number in the IBP corresponding to
the priority of the pending interrupt is reseted and so is the EO bit
of the NSR.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Fix style nits]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:37:33 +11:00
Cédric Le Goater
af53dbf622 ppc/xive: introduce a simplified XIVE presenter
The last sub-engine of the XIVE architecture is the Interrupt
Virtualization Presentation Engine (IVPE). On HW, the IVRE and the
IVPE share elements, the Power Bus interface (CQ), the routing table
descriptors, and they can be combined in the same HW logic. We do the
same in QEMU and combine both engines in the XiveRouter for
simplicity.

When the IVRE has completed its job of matching an event source with a
Notification Virtual Target (NVT) to notify, it forwards the event
notification to the IVPE sub-engine. The IVPE scans the thread
interrupt contexts of the Notification Virtual Targets (NVT)
dispatched on the HW processor threads and if a match is found, it
signals the thread. If not, the IVPE escalates the notification to
some other targets and records the notification in a backlog queue.

The IVPE maintains the thread interrupt context state for each of its
NVTs not dispatched on HW processor threads in the Notification
Virtual Target table (NVTT).

The model currently only supports single NVT notifications.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Folded in fix for field accessors]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:37:04 +11:00
Cédric Le Goater
207d9fe985 ppc/xive: introduce the XIVE interrupt thread context
Each POWER9 processor chip has a XIVE presenter that can generate four
different exceptions to its threads:

  - hypervisor exception,
  - O/S exception
  - Event-Based Branch (EBB)
  - msgsnd (doorbell).

Each exception has a state independent from the others called a Thread
Interrupt Management context. This context is a set of registers which
lets the thread handle priority management and interrupt acknowledgment
among other things. The most important ones being :

  - Interrupt Priority Register  (PIPR)
  - Interrupt Pending Buffer     (IPB)
  - Current Processor Priority   (CPPR)
  - Notification Source Register (NSR)

These registers are accessible through a specific MMIO region, called
the Thread Interrupt Management Area (TIMA), four aligned pages, each
exposing a different view of the registers. First page (page address
ending in 0b00) gives access to the entire context and is reserved for
the ring 0 view for the physical thread context. The second (page
address ending in 0b01) is for the hypervisor, ring 1 view. The third
(page address ending in 0b10) is for the operating system, ring 2
view. The fourth (page address ending in 0b11) is for user level, ring
3 view.

The thread interrupt context is modeled with a XiveTCTX object
containing the values of the different exception registers. The TIMA
region is mapped at the same address for each CPU.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:29:12 +11:00
Cédric Le Goater
002686be42 ppc/xive: add support for the END Event State Buffers
The Event Notification Descriptor (END) XIVE structure also contains
two Event State Buffers providing further coalescing of interrupts,
one for the notification event (ESn) and one for the escalation events
(ESe). A MMIO page is assigned for each to control the EOI through
loads only. Stores are not allowed.

The END ESBs are modeled through an object resembling the 'XiveSource'
It is stateless as the END state bits are backed into the XiveEND
structure under the XiveRouter and the MMIO accesses follow the same
rules as for the XiveSource ESBs.

END ESBs are not supported by the Linux drivers neither on OPAL nor on
sPAPR. Nevetherless, it provides a mean to study the question in the
future and validates a bit more the XIVE model.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fold in a later fix for field access]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:29:12 +11:00
Cédric Le Goater
e4ddaac67f ppc/xive: introduce the XIVE Event Notification Descriptors
To complete the event routing, the IVRE sub-engine uses a second table
containing Event Notification Descriptor (END) structures.

An END specifies on which Event Queue (EQ) the event notification
data, defined in the associated EAS, should be posted when an
exception occurs. It also defines which Notification Virtual Target
(NVT) should be notified.

The Event Queue is a memory page provided by the O/S defining a
circular buffer, one per server and priority couple, containing Event
Queue entries. These are 4 bytes long, the first bit being a
'generation' bit and the 31 following bits the END Data field. They
are pulled by the O/S when the exception occurs.

The END Data field is a way to set an invariant logical event source
number for an IRQ. On sPAPR machines, it is set with the
H_INT_SET_SOURCE_CONFIG hcall when the EISN flag is used.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fold in a later fix from Cédric fixing field accessors]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:26:42 +11:00
Cédric Le Goater
7ff7ea9280 ppc/xive: introduce the XiveRouter model
The XiveRouter models the second sub-engine of the XIVE architecture :
the Interrupt Virtualization Routing Engine (IVRE).

The IVRE handles event notifications of the IVSE and performs the
interrupt routing process. For this purpose, it uses a set of tables
stored in system memory, the first of which being the Event Assignment
Structure (EAS) table.

The EAT associates an interrupt source number with an Event Notification
Descriptor (END) which will be used in a second phase of the routing
process to identify a Notification Virtual Target.

The XiveRouter is an abstract class which needs to be inherited from
to define a storage for the EAT, and other upcoming tables.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Folded in parts of a later fix by Cédric fixing field access]
[dwg: Fix style nits]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:26:31 +11:00
Cédric Le Goater
5e79b155a8 ppc/xive: introduce the XiveNotifier interface
The XiveNotifier offers a simple interface, between the XiveSource
object and the main interrupt controller of the machine. It will
forward event notifications to the XIVE Interrupt Virtualization
Routing Engine (IVRE).

Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Adjust type name string for XiveNotifier]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:24:23 +11:00
Cédric Le Goater
5fd9ef18a9 ppc/xive: add support for the LSI interrupt sources
The 'sent' status of the LSI interrupt source is modeled with the 'P'
bit of the ESB and the assertion status of the source is maintained
with an extra bit under the main XiveSource object. The type of the
source is stored in the same array for practical reasons.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fix style nit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:24:23 +11:00
Cédric Le Goater
02e3ff548d ppc/xive: introduce a XIVE interrupt source model
The first sub-engine of the overall XIVE architecture is the Interrupt
Virtualization Source Engine (IVSE). An IVSE can be integrated into
another logic, like in a PCI PHB or in the main interrupt controller
to manage IPIs.

Each IVSE instance is associated with an Event State Buffer (ESB) that
contains a two bit state entry for each possible event source. When an
event is signaled to the IVSE, by MMIO or some other means, the
associated interrupt state bits are fetched from the ESB and
modified. Depending on the resulting ESB state, the event is forwarded
to the IVRE sub-engine of the controller doing the routing.

Each supported ESB entry is associated with either a single or a
even/odd pair of pages which provides commands to manage the source:
to EOI, to turn off the source for instance.

On a sPAPR machine, the O/S will obtain the page address of the ESB
entry associated with a source and its characteristic using the
H_INT_GET_SOURCE_INFO hcall. On PowerNV, a similar OPAL call is used.

The xive_source_notify() routine is in charge forwarding the source
event notification to the routing engine. It will be filled later on.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21 09:24:23 +11:00
Peter Maydell
b019f5e537 miscellaneous patches:
* checkpatch.pl: Enforce multiline comment syntax
  * Rename cpu_physical_memory_write_rom() to address_space_write_rom()
  * disas, monitor, elf_ops: Use address_space_read() to read memory
  * Remove load_image() in favour of load_image_size()
  * Fix some minor memory leaks in arm boards/devices
  * virt: fix broken indentation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJcE8EQAAoJEDwlJe0UNgze1iAP/3HAQI4Z5A3pX3I2YnVBDrS3
 hOsPXNUNs2asDqoijkq4cxaqhTv1bio7CPLTg8uvkyWiCOS6pbKjtlE+A/VKGjKZ
 7rH9GBNxlH7h/ZIRJTPfX38YiAWI//eIRY4JqUgKpmprE6Y7cGf5/uzmE0OwBwur
 HlKKkox6oH4WEk6rTIqP92xMhJNuTC2j1s7qQ2dCQKZdNAAYh++cHuiR1JtEjeQ8
 O1/O4u6lumnqQMFtqhlt5++QxWvBU5IbdyJblBV+hCQekNSkj5fUIequBsjGrJru
 aZGxO828EEM7dS9/fFnT+YU25/rJ43RSs8aSBLqI/WWRALGQKU88POS5T7zfpzq/
 3qzSPWrOhgMFxl/APrGi13DdXTZ5J9UA0qypL8RiwdWj6WWJOo1OcRqzMGQhv1HS
 Fe22cWDDuXimQhUuyXM/XY234iPxFJkkq89ANHHfeCNFurzNV9WVN1mV2pfqwdX0
 khh3DZyXRDa/UazLY0QyJHStyop76Ox8P8tCAvQbhZWr33Ns+uTr1YBHibimx3iG
 6FOpH0FcpAE9oab9xUIdtMJCtx0YEWQ0ap/xMLlnmS8/bL7PX8HY0SIT2WwAiybg
 ibwen23Aah5LPpvd5BjGi1MAQEQwZvX8Ab7G+h1F4yzSfOchQt3eZN4fhwOkgjQA
 Bbb3bFUkIcXZ8BqabHA8
 =ehNF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-misc-20181214' into staging

miscellaneous patches:
 * checkpatch.pl: Enforce multiline comment syntax
 * Rename cpu_physical_memory_write_rom() to address_space_write_rom()
 * disas, monitor, elf_ops: Use address_space_read() to read memory
 * Remove load_image() in favour of load_image_size()
 * Fix some minor memory leaks in arm boards/devices
 * virt: fix broken indentation

# gpg: Signature made Fri 14 Dec 2018 14:41:20 GMT
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-misc-20181214: (22 commits)
  virt: Fix broken indentation
  target/arm: Create timers in realize, not init
  tests/test-arm-mptimer: Don't leak string memory
  hw/sd/sdhci: Don't leak memory region in sdhci_sysbus_realize()
  hw/arm/mps2-tz.c: Free mscname string in make_dma()
  target/arm: Free name string in ARMCPRegInfo hashtable entries
  include/hw/loader.h: Document load_image_size()
  hw/core/loader.c: Remove load_image()
  device_tree.c: Don't use load_image()
  hw/block/tc58128.c: Don't use load_image()
  hw/i386/multiboot.c: Don't use load_image()
  hw/i386/pc.c: Don't use load_image()
  hw/pci/pci.c: Don't use load_image()
  hw/smbios/smbios.c: Don't use load_image()
  hw/ppc/ppc405_boards: Don't use load_image()
  hw/ppc/mac_newworld, mac_oldworld: Don't use load_image()
  elf_ops.h: Use address_space_write() to write memory
  monitor: Use address_space_read() to read memory
  disas.c: Use address_space_read() to read memory
  Rename cpu_physical_memory_write_rom() to address_space_write_rom()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-16 16:32:43 +00:00
Peter Maydell
3c8133f973 Rename cpu_physical_memory_write_rom() to address_space_write_rom()
The API of cpu_physical_memory_write_rom() is odd, because it
takes an AddressSpace, unlike all the other cpu_physical_memory_*
access functions. Rename it to address_space_write_rom(), and
bring its API into line with address_space_write().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20181122133507.30950-3-peter.maydell@linaro.org
2018-12-14 13:30:48 +00:00
Richard Henderson
f777844460 target/arm: Introduce arm_hcr_el2_eff
Replace arm_hcr_el2_{fmo,imo,amo} with a more general routine
that also takes SCR_EL3.NS (aka arm_is_secure_below_el3) into
account, as documented for the plethora of bits in HCR_EL2.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Mao Zhongyi
2f59de8877 intc/puv3_intc: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
puv3_intc_class_init().

Cc: gxt@mprc.pku.edu.cn

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-11-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:59 +00:00
Marc-André Lureau
03fee66fde vmstate: constify VMStateField
Because they are supposed to remain const.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-27 15:35:15 +01:00
Richard Henderson
47576b94af target/arm: Move some system registers into a substructure
Create struct ARMISARegisters, to be accessed during translation.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:50:16 +01:00
Markus Armbruster
11ab69d6e7 ioapic: Fix error handling in realize()
Calling error_report() in a function that takes an Error ** argument
is suspicious.  ioapic_realize() does that, and then exit()s.
Currently mostly harmless, as the device cannot be hot-plugged.

Fixes: 20fd4b7b6d
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-11-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Markus Armbruster
50beeb6809 Use error_fatal to simplify obvious fatal errors (again)
Add a slight improvement of the Coccinelle semantic patch from commit
007b06578a, and use it to clean up.  It leaves dead Error * variables
behind, cleaned up manually.

Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Eric Blake <eblake@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20181017082702.5581-3-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Markus Armbruster
4b5766488f error: Fix use of error_prepend() with &error_fatal, &error_abort
From include/qapi/error.h:

  * Pass an existing error to the caller with the message modified:
  *     error_propagate(errp, err);
  *     error_prepend(errp, "Could not frobnicate '%s': ", name);

Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.

Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.

Convert existing error_prepend() next to error_propagate to
error_propagate_prepend().  If any of these get reached with
&error_fatal or &error_abort, the error messages improve.  I didn't
check whether that's the case anywhere.

Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Peter Maydell
b6e6c65151 hw/intc/arm_gic: Drop GIC_BASE_IRQ macro
The GIC_BASE_IRQ macro is a leftover from when we shared code
between the GICv2 and the v7M NVIC. Since the NVIC is now
split off, GIC_BASE_IRQ is always 0, and we can just delete it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180824161819.11085-1-peter.maydell@linaro.org
2018-09-25 15:13:24 +01:00
Peter Maydell
7210918cad hw/intc/arm_gic: Make per-cpu GICH memory regions 0x200 bytes large
Reduce the size of the per-cpu GICH memory regions from 0x1000
to 0x200. The registers only cover 0x200 bytes, and the Cortex-A15
wants to map them at a spacing of 0x200 bytes apart. Having the
region be too large interferes with mapping them like that, so
reduce it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180821132811.17675-3-peter.maydell@linaro.org
2018-08-24 13:17:31 +01:00
Peter Maydell
21f80e8fa7 hw/intc/apic: Switch away from old_mmio
Switch the apic away from using the old_mmio MemoryRegionOps
accessor functions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180803101943.23722-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Peter Maydell
514b4f361b nvic: Expose NMI line
On real v7M hardware, the NMI line is an externally visible signal
that an SoC or board can toggle to assert an NMI. Expose it in
our QEMU NVIC and armv7m container objects so that a board model
can wire it up if it needs to.

In particular, the MPS2 watchdog is wired to NMI.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20 11:24:33 +01:00
Jia He
84be3ef1de hw/intc/arm_gicv3_its: downgrade error_report to warn_report in kvm_arm_its_reset
In scripts/arch-run.bash of kvm-unit-tests, it will check the qemu
output log with:
if [ -z "$(echo "$errors" | grep -vi warning)" ]; then

Thus without the warning prefix, all of the test fail.

Since it is not unrecoverable error in kvm_arm_its_reset for
current implementation, downgrading the report from error to
warn makes sense.

Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Message-id: 1531969910-32843-1-git-send-email-jia.he@hxt-semitech.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 11:24:31 +01:00
Peter Maydell
ac656b166b target/arm: Provide accessor functions for HCR_EL2.{IMO, FMO, AMO}
The IMO, FMO and AMO bits in HCR_EL2 are defined to "behave as
1 for all purposes other than direct reads" if HCR_EL2.TGE
is set and HCR_EL2.E2H is 0, and to "behave as 0 for all
purposes other than direct reads" if HCR_EL2.TGE is set
and HRC_EL2.E2H is 1.

To avoid having to check E2H and TGE everywhere where we test IMO and
FMO, provide accessors arm_hcr_el2_imo(), arm_hcr_el2_fmo()and
arm_hcr_el2_amo().  We don't implement ARMv8.1-VHE yet, so the E2H
case will never be true, but we include the logic to save effort when
we eventually do get to that.

(Note that in several of these callsites the change doesn't
actually make a difference as either the callsite is handling
TGE specially anyway, or the CPU can't get into that situation
with TGE set; we change everywhere for consistency.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-5-peter.maydell@linaro.org
2018-08-14 17:17:21 +01:00
Luc Michel
067a2b9c15 intc/arm_gic: Improve traces
Add some traces to the ARM GIC to catch register accesses (distributor,
(v)cpu interface and virtual interface), and to take into account
virtualization extensions (print `vcpu` instead of `cpu` when needed).

Also add some virtualization extensions specific traces: LR updating
and maintenance IRQ generation.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-19-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:21 +01:00
Luc Michel
50e579262d intc/arm_gic: Implement maintenance interrupt generation
Implement the maintenance interrupt generation that is part of the GICv2
virtualization extensions.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-18-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:21 +01:00
Luc Michel
cbe1282b56 intc/arm_gic: Implement gic_update_virt() function
Add the gic_update_virt() function to update the vCPU interface states
and raise vIRQ and vFIQ as needed. This commit renames gic_update() to
gic_update_internal() and generalizes it to handle both cases, with a
`virt' parameter to track whether we are updating the CPU or vCPU
interfaces.

The main difference between CPU and vCPU is the way we select the best
IRQ. This part has been split into the gic_get_best_(v)irq functions.
For the virt case, the LRs are iterated to find the best candidate.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-17-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
527d296f5d intc/arm_gic: Implement the virtual interface registers
Implement the read and write functions for the virtual interface of the
virtualization extensions in the GICv2.

One mirror region per CPU is also created, which maps to that specific
CPU id. This is required by the GIC architecture specification.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-16-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
2c679ac734 intc/arm_gic: Wire the vCPU interface
Add the read/write functions to handle accesses to the vCPU interface.
Those accesses are forwarded to the real CPU interface, with the CPU id
being converted to the corresponding vCPU id (vCPU id = CPU id +
GIC_NCPU).

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180727095421.386-15-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
7eb079ec51 intc/arm_gic: Implement virtualization extensions in gic_cpu_(read|write)
Implement virtualization extensions in the gic_cpu_read() and
gic_cpu_write() functions. Those are the last bits missing to fully
support virtualization extensions in the CPU interface path.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-14-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
02f2e22d7c intc/arm_gic: Implement virtualization extensions in gic_(deactivate|complete_irq)
Implement virtualization extensions in the gic_deactivate_irq() and
gic_complete_irq() functions.

When the guest writes an invalid vIRQ to V_EOIR or V_DIR, since the
GICv2 specification is not entirely clear here, we adopt the behaviour
observed on real hardware:
  * When V_CTRL.EOIMode is false (EOI split is disabled):
    - In case of an invalid vIRQ write to V_EOIR:
      -> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR
         triggers a priority drop, and increments V_HCR.EOICount.
      -> If V_APR is already cleared, nothing happen

    - An invalid vIRQ write to V_DIR is ignored.

  * When V_CTRL.EOIMode is true:
    - In case of an invalid vIRQ write to V_EOIR:
      -> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR
         triggers a priority drop.
      -> If V_APR is already cleared, nothing happen

    - An invalid vIRQ write to V_DIR increments V_HCR.EOICount.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180727095421.386-13-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
439badd66d intc/arm_gic: Implement virtualization extensions in gic_acknowledge_irq
Implement virtualization extensions in the gic_acknowledge_irq()
function. This function changes the state of the highest priority IRQ
from pending to active.

When the current CPU is a vCPU, modifying the state of an IRQ modifies
the corresponding LR entry. However if we clear the pending flag before
setting the active one, we lose track of the LR entry as it becomes
invalid. The next call to gic_get_lr_entry() will fail.

To overcome this issue, we call gic_activate_irq() before
gic_clear_pending(). This does not change the general behaviour of
gic_acknowledge_irq.

We also move the SGI case in gic_clear_pending_sgi() to enhance
code readability as the virtualization extensions support adds a if-else
level.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-12-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
a1d7b8d896 intc/arm_gic: Implement virtualization extensions in gic_(activate_irq|drop_prio)
Implement virtualization extensions in gic_activate_irq() and
gic_drop_prio() and in gic_get_prio_from_apr_bits() called by
gic_drop_prio().

When the current CPU is a vCPU:
  - Use GIC_VIRT_MIN_BPR and GIC_VIRT_NR_APRS instead of their non-virt
  counterparts,
  - the vCPU APR is stored in the virtual interface, in h_apr.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-11-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
86b350f0d0 intc/arm_gic: Add virtualization enabled IRQ helper functions
Add some helper functions to gic_internal.h to get or change the state
of an IRQ. When the current CPU is not a vCPU, the call is forwarded to
the GIC distributor. Otherwise, it acts on the list register matching
the IRQ in the current CPU virtual interface.

gic_clear_active can have a side effect on the distributor, even in the
vCPU case, when the correponding LR has the HW field set.

Use those functions in the CPU interface code path to prepare for the
vCPU interface implementation.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727095421.386-10-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
3dd0471b75 intc/arm_gic: Refactor secure/ns access check in the CPU interface
An access to the CPU interface is non-secure if the current GIC instance
implements the security extensions, and the memory access is actually
non-secure. Until then, it was checked with tests such as
  if (s->security_extn && !attrs.secure) { ... }
in various places of the CPU interface code.

With the implementation of the virtualization extensions, those tests
must be updated to take into account whether we are in a vCPU interface
or not. This is because the exposed vCPU interface does not implement
security extensions.

This commits replaces all those tests with a call to the
gic_cpu_ns_access() function to check if the current access to the CPU
interface is non-secure. This function takes into account whether the
current CPU is a vCPU or not.

Note that this function is used only in the (v)CPU interface code path.
The distributor code path is left unchanged, as the distributor is not
exposed to vCPUs at all.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727095421.386-9-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
4a37e0e476 intc/arm_gic: Add virtualization extensions helper macros and functions
Add some helper macros and functions related to the virtualization
extensions to gic_internal.h.

The GICH_LR_* macros help extracting specific fields of a list register
value. The only tricky one is the priority field as only the MSB are
stored. The value must be shifted accordingly to obtain the correct
priority value.

gic_is_vcpu() and gic_get_vcpu_real_id() help with (v)CPU id manipulation
to abstract the fact that vCPU id are in the range
[ GIC_NCPU; (GIC_NCPU + num_cpu) [.

gic_lr_* and gic_virq_is_valid() help with the list registers.
gic_get_lr_entry() returns the LR entry for a given (vCPU, irq) pair. It
is meant to be used in contexts where we know for sure that the entry
exists, so we assert that entry is actually found, and the caller can
avoid the NULL check on the returned pointer.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-8-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
7c2fffd282 intc/arm_gic: Add virtual interface register definitions
Add the register definitions for the virtual interface of the GICv2.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-7-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
5773c0494a intc/arm_gic: Add the virtualization extensions to the GIC state
Add the necessary parts of the virtualization extensions state to the
GIC state. We choose to increase the size of the CPU interfaces state to
add space for the vCPU interfaces (the GIC_NCPU_VCPU macro). This way,
we'll be able to reuse most of the CPU interface code for the vCPUs.

The only exception is the APR value, which is stored in h_apr in the
virtual interface state for vCPUs. This is due to some complications
with the GIC VMState, for which we don't want to break backward
compatibility. APRs being stored in 2D arrays, increasing the second
dimension would lead to some ugly VMState description. To avoid
that, we keep it in h_apr for vCPUs.

The vCPUs are numbered from GIC_NCPU to (GIC_NCPU * 2) - 1. The
`gic_is_vcpu` function help to determine if a given CPU id correspond to
a physical CPU or a virtual one.

For the in-kernel KVM VGIC, since the exposed VGIC does not implement
the virtualization extensions, we report an error if the corresponding
property is set to true.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-6-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
50491c56a5 intc/arm_gic: Remove some dead code and put some functions static
Some functions are now only used in arm_gic.c, put them static. Some of
them where only used by the NVIC implementation and are not used
anymore, so remove them.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-4-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
Luc Michel
3bb0b03897 intc/arm_gic: Implement GICD_ISACTIVERn and GICD_ICACTIVERn registers
Implement GICD_ISACTIVERn and GICD_ICACTIVERn registers in the GICv2.
Those registers allow to set or clear the active state of an IRQ in the
distributor.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-3-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:19 +01:00
Luc Michel
67ce697ac8 intc/arm_gic: Refactor operations on the distributor
In preparation for the virtualization extensions implementation,
refactor the name of the functions and macros that act on the GIC
distributor to make that fact explicit. It will be useful to
differentiate them from the ones that will act on the virtual
interfaces.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-2-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:19 +01:00
Julia Suvorova
c4379b4874 nvic: Change NVIC to support ARMv6-M
The differences from ARMv7-M NVIC are:
  * ARMv6-M only supports up to 32 external interrupts
   (configurable feature already). The ICTR is reserved.
  * Active Bit Register is reserved.
  * ARMv6-M supports 4 priority levels against 256 in ARMv7-M.

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:19 +01:00
Julia Suvorova
22ab346001 arm: Add ARMv6-M programmer's model support
Forbid stack alignment change. (CCR)
Reserve FAULTMASK, BASEPRI registers.
Report any fault as a HardFault. Disable MemManage, BusFault and
UsageFault, so they always escalated to HardFault. (SHCSR)

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180718095628.26442-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:19 +01:00
Julia Suvorova
7c9140afd5 nvic: Handle ARMv6-M SCS reserved registers
Handle SCS reserved registers listed in ARMv6-M ARM D3.6.1.
All reserved registers are RAZ/WI. ARM_FEATURE_M_MAIN is used for the
checks, because these registers are reserved in ARMv8-M Baseline too.

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:19 +01:00
Peter Maydell
341823c172 hw/intc/arm_gicv3_common: Move gicd shift bug handling to gicv3_post_load
The code currently in gicv3_gicd_no_migration_shift_bug_post_load()
that handles migration from older QEMU versions with a particular
bug is misplaced. We need to run this after migration in all cases,
not just the cases where the "arm_gicv3/gicd_no_migration_shift_bug"
subsection is present, so it must go in a post_load hook for the
top level VMSD, not for the subsection. Move it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-6-peter.maydell@linaro.org
2018-08-06 16:19:33 +01:00
Peter Maydell
326049cc8e hw/intc/arm_gicv3_common: Move post_load hooks to top-level VMSD
Contrary to the the impression given in docs/devel/migration.rst,
the migration code does not run the pre_load hook for a
subsection unless the subsection appears on the wire, and so
this is not a place where you can set the default value for
state for the "subsection not present" case. Instead this needs
to be done in a pre_load hook for whatever is the parent VMSD
of the subsection.

We got this wrong in two of the subsection definitions in
the GICv3 migration structs; fix this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-5-peter.maydell@linaro.org
2018-08-06 16:19:33 +01:00
Peter Maydell
adc4fda6d5 hw/intc/arm_gicv3_common: Combine duplicate .subsections in vmstate_gicv3_cpu
Commit 6692aac411 accidentally introduced a second initialization
of the .subsections field of vmstate_gicv3_cpu, instead of adding
the new subsection to the existing list. The effect of this was
probably that migration of GICv3 with virtualization enabled was
broken (or alternatively that migration of ICC_SRE_EL1 was broken,
depending on which of the two initializers the compiler used).
Combine the two into a single list.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-3-peter.maydell@linaro.org
2018-08-06 16:19:33 +01:00
Peter Maydell
78e9ddd75e hw/intc/arm_gicv3_common: Give no-migration-shift-bug subsection a needed function
Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving vmstate_gicv3_gicd_no_migration_shift_bug
a 'needed' function that always returns true.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-2-peter.maydell@linaro.org
2018-08-06 16:19:33 +01:00
Peter Maydell
942566ffc1 armv7m_nvic: Fix m-security subsection name
The vmstate save/load code insists that subsections of a VMState must
have names which include their parent VMState's name as a leading
substring.  Unfortunately it neither documents this nor checks it on
device init or state save, but instead fails state load with a
confusing error message ("Missing section footer for armv7m_nvic").

Fix the name of the m-security subsection of the NVIC, so that
state save/load works correctly for the security-enabled NVIC.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180727113854.20283-2-peter.maydell@linaro.org
2018-07-30 14:51:40 +01:00
Peter Maydell
1a5182c0d2 target/arm: Escalate to correct HardFault when AIRCR.BFHFNMINS is set
When we escalate a v8M exception to HardFault, if AIRCR.BFHFNMINNS is
set then we need to decide whether it should become a secure HardFault
or a nonsecure HardFault. We should always escalate to the same
target security state as the original exception. The current code
tries to test this using the 'secure' bool, which is not right because
that flag indicates whether the target security state only for
banked exceptions; the effect was that we were incorrectly escalating
always-secure exceptions like SecureFault to a nonsecure HardFault.

Fix this by defining, logging and using a new 'targets_secure' bool
which tracks the condition we actually want.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180723123457.2038-1-peter.maydell@linaro.org
2018-07-24 11:43:08 +01:00
Peter Maydell
042374c92e hw/intc/arm_gicv3: Check correct HCR_EL2 bit when routing IRQ
In icc_dir_write() we were incorrectly checking HCR_EL2.FMO
when determining whether IRQ should be routed to EL2; this should
be HCR_EL2.IMO (compare the GICv3 pseudocode ICC_DIR_EL1[]).
Use the correct mask.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180723180337.17378-1-peter.maydell@linaro.org
2018-07-24 11:42:15 +01:00
Thomas Huth
1ddc9b98c3 hw/intc/exynos4210_gic: Turn instance_init into realize function
The instance_init function of the "exynos4210.gic" device creates a
new "arm_gic" device and immediately realizes it with qdev_init_nofail().
This will leave a lot of object in the QOM tree during introspection of
the "exynos4210.gic" device, e.g. reproducible by starting QEMU like this:

qemu-system-aarch64 -M none -nodefaults -nographic -monitor stdio

And then by running "info qom-tree" at the HMP monitor, followed by
"device_add exynos4210.gic,help" and finally checking "info qom-tree"
again.

Also note that qdev_init_nofail() can exit QEMU in case of errors - and
this must never happen during an instance_init function, otherwise QEMU
could terminate unexpectedly during introspection of a device.

Since most of the code that follows the qdev_init_nofail() depends on
the realized "gicbusdev", the easiest solution to the problem is to
turn the whole instance_init function into a realize function instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1532337784-334-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-23 15:21:27 +01:00
Thomas Huth
32db1b58ca hw/*/realview: Fix introspection problem with 'realview_mpcore' & 'realview_gic'
echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
 "'arguments':{'typename':'realview_mpcore'}}" \
 "{'execute': 'human-monitor-command', " \
 "'arguments': {'command-line': 'info qtree'}}" | \
 valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio
[...]
==2654== Invalid read of size 8
==2654==    at 0x61878A: qdev_print (qdev-monitor.c:686)
==2654==    by 0x61878A: qbus_print (qdev-monitor.c:719)
==2654==    by 0x452B38: handle_hmp_command (monitor.c:3446)
==2654==    by 0x452D70: qmp_human_monitor_command (monitor.c:821)
[...]

Use sysbus_init_child_obj() to fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-14-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-17 13:12:49 +01:00
Thomas Huth
955cbc6b17 hw/arm/armv7: Fix crash when introspecting the "iotkit" device
QEMU currently crashes when introspecting the "iotkit" device and
runnint "info qtree" afterwards, e.g. when running QEMU like this:

echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
 "'arguments':{'typename':'iotkit'}}" "{'execute': 'human-monitor-command', " \
 "'arguments': {'command-line': 'info qtree'}}" | \
 aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio

Use the new functions object_initialize_child() and sysbus_init_child_obj()
to make sure that all objects get cleaned up correctly when the instances
are destroyed.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-5-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-17 13:12:49 +01:00
Peter Maydell
7995206d05 hw/intc/arm_gic: Fix handling of GICD_ITARGETSR
The GICD_ITARGETSR implementation still has some 11MPCore behaviour
that we were incorrectly using in our GICv1 and GICv2 implementations
for the case where the interrupt number is less than GIC_INTERNAL.
The desired behaviour here is:
 * for 11MPCore: RAZ/WI for irqs 0..28; read a number matching the
   CPU doing the read for irqs 29..31
 * for GICv1 and v2: RAZ/WI if uniprocessor; otherwise read a
   number matching the CPU doing the read for all irqs < 32

Stop squashing GICD_ITARGETSR to 0 for IRQs 0..28 unless this
is an 11MPCore GIC.

Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180712154152.32183-3-peter.maydell@linaro.org
2018-07-16 17:18:41 +01:00
Peter Maydell
ee03cca88e hw/intc/arm_gic: Check interrupt number in gic_deactivate_irq()
In gic_deactivate_irq() the interrupt number comes from the guest
(on a write to the GICC_DIR register), so we need to sanity check
that it isn't out of range before we use it as an array index.
Handle this in a similar manner to the check we do in
gic_complete_irq() for the GICC_EOI register.

The array overrun is not disastrous because the calling code
uses (value & 0x3ff) to extract the interrupt field, so the
only out-of-range values possible are 1020..1023, which allow
overrunning only from irq_state[] into the following
irq_target[] array which the guest can already manipulate.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180712154152.32183-2-peter.maydell@linaro.org
2018-07-16 17:18:41 +01:00
Greg Kurz
b585395b65 ppc/xics: fix ICP reset path
Recent cleanup in commit a028dd423e dropped the ICPStateClass::reset
handler. It is now up to child ICP classes to call the DeviceClass::reset
handler of the parent class, thanks to device_class_set_parent_reset().
This is a better object programming pattern, but unfortunately it causes
QEMU to crash during CPU hotplug:

(qemu) device_add host-spapr-cpu-core,id=core1,core-id=1
Segmentation fault (core dumped)

When the hotplug path tries to reset the ICP device, we end up calling:

static void icp_kvm_reset(DeviceState *dev)
{
    ICPStateClass *icpc = ICP_GET_CLASS(dev);

    icpc->parent_reset(dev);

but icpc->parent_reset is NULL... This happens because icp_kvm_class_init()
calls:

    device_class_set_parent_reset(dc, icp_kvm_reset,
                                  &icpc->parent_reset);

but dc->reset, ie, DeviceClass::reset for the TYPE_ICP type, is
itself NULL.

This patch hence sets DeviceClass::reset for the TYPE_ICP type to
point to icp_reset(). It then registers a reset handler that calls
DeviceClass::reset. If the ICP subtype has configured its own reset
handler with device_class_set_parent_reset(), this ensures it will
be called first and it can then call ICPStateClass::parent_reset
safely. This fixes the reset path for the TYPE_KVM_ICP type, which
is the only subtype that defines its own reset function.

Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: a028dd423e
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-16 11:18:09 +10:00
Paolo Bonzini
960a479f7f ioapic: remove useless lower bounds check
The vector cannot be negative.  Coverity now reports this because it sees an
array access before the check, in ioapic_stat_update_irq.

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-06 18:39:19 +02:00
Cédric Le Goater
abe82ebb20 ppc/xics: rework the ICS classes inheritance tree
With the previous changes, we can now let the ICS_KVM class inherit
directly from ICS_BASE class and not from the intermediate ICS_SIMPLE.
It makes the class hierarchy much cleaner.

What is left in the top classes is the low level interface to access
the KVM XICS device in ICS_KVM and the XICS emulating handlers in
ICS_SIMPLE.

This should not break migration compatibility.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Cédric Le Goater
c8b1846f23 ppc/xics: move the vmstate structures under the ics-base class
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Cédric Le Goater
eeefd43b3c ppx/xics: introduce a parent_reset in ICSStateClass
Just like for the realize handlers, this makes possible to move the
common ICSState code of the reset handlers in the ics-base class.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Cédric Le Goater
815049a01b ppc/xics: move the instance_init handler under the ics-base class
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Cédric Le Goater
0a647b76db ppc/xics: introduce a parent_realize in ICSStateClass
This makes possible to move the common ICSState code of the realize
handlers in the ics-base class.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Cédric Le Goater
a028dd423e ppc/xics: introduce ICP DeviceRealize and DeviceReset handlers
This changes the ICP realize and reset handlers in DeviceRealize and
DeviceReset handlers. parent handlers are now called from the
inheriting classes which is a cleaner object pattern.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Peter Xu
0c8465440d hmp: obsolete "info ioapic"
Let's start to use "info pic" just like other platforms.  For now we
keep the command for a while so that old users can know what is the new
command to use.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-6-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:37 +02:00
Peter Xu
cce5405e0e ioapic: support "info irq"
This include both userspace and in-kernel ioapic.  Note that the numbers
can be inaccurate for kvm-ioapic.  One reason is the same with
kvm-i8259, that when irqfd is used, irqs can be delivered all inside
kernel without our notice.  Meanwhile, kvm-ioapic is specially treated
when irq numbers <ISA_NUM_IRQS, those irqs will be delivered in kernel
too via kvm-i8259 (please refer to kvm_pc_gsi_handler).

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:37 +02:00
Peter Xu
6a218b032b ioapic: some proper indents when dump info
So that now it looks better when with other irqchips.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:37 +02:00
Peter Xu
4a499ad295 ioapic: support "info pic"
People start to use "info pic" for all kinds of irqchip dumps.  Let x86
ioapic join the family.  It dumps the same thing as "info ioapic".

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:37 +02:00
Eric Auger
80d6733389 hw/intc/arm_gicv3_kvm: Get prepared to handle multiple redist regions
Let's check if KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION is supported.
If not, we check the number of redist region is equal to 1 and use the
legacy KVM_VGIC_V3_ADDR_TYPE_REDIST attribute. Otherwise we use
the new attribute and allow to register multiple regions to the
KVM device.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1529072910-16156-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22 13:28:36 +01:00
Eric Auger
1e575b6664 hw/intc/arm_gicv3: Introduce redist-region-count array property
To prepare for multiple redistributor regions, we introduce
an array of uint32_t properties that stores the redistributor
count of each redistributor region.

Non accelerated VGICv3 only supports a single redistributor region.
The capacity of all redist regions is checked against the number of
vcpus.

Machvirt is updated to set those properties, ie. a single
redistributor region with count set to the number of vcpus
capped by 123.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1529072910-16156-4-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22 13:28:36 +01:00
Eric Auger
19d1bd0b58 target/arm: Allow KVM device address overwriting
for KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION attribute, the attribute
data pointed to by kvm_device_attr.addr is a OR of the
redistributor region address and other fields such as the index
of the redistributor region and the number of redistributors the
region can contain.

The existing machine init done notifier framework sets the address
field to the actual address of the device and does not allow to OR
this value with other fields.

This patch extends the KVMDevice struct with a new kda_addr_ormask
member. Its value is passed at registration time and OR'ed with the
resolved address on kvm_arm_set_device_addr().

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1529072910-16156-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22 13:28:35 +01:00
Amol Surati
d419890c04 hw/intc/arm_gicv3: fix an extra left-shift when reading IPRIORITYR
When either GICD_IPRIORITYR or GICR_IPRIORITYR is read as a 32-bit
register, the post left-shift operator in the for loop causes an
extra shift after the least significant byte has been placed.

The 32-bit value actually returned is therefore the expected value
shifted left by 8 bits.

Signed-off-by: Amol Surati <suratiamol@gmail.com>
Message-id: 20180614054857.26248-1-suratiamol@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22 13:28:34 +01:00
Cédric Le Goater
52b438815e xics_kvm: fix a build break
On CentOS 7.5, gcc-4.8.5-28.el7_5.1.ppc64le fails to build QEMU due to :

  hw/intc/xics_kvm.c: In function ‘ics_set_kvm_state’:
  hw/intc/xics_kvm.c:281:13: error: ‘ret’ may be used uninitialized in this
    function [-Werror=maybe-uninitialized]
             return ret;

Fix the breakage and also remove the extra error reporting as
kvm_device_access() already provides a substantial error message.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-16 16:32:33 +10:00
Peter Maydell
95f875654a arm: Don't crash if user tries to use a Cortex-M CPU without an NVIC
The Cortex-M CPU and its NVIC are two intimately intertwined parts of
the same hardware; it is not possible to use one without the other.
Unfortunately a lot of our board models don't do any sanity checking
on the CPU type the user asks for, so a command line like
    qemu-system-arm -M versatilepb -cpu cortex-m3
will create an M3 without an NVIC, and coredump immediately.
In the other direction, trying a non-M-profile CPU in an M-profile
board won't blow up, but doesn't do anything useful either:
    qemu-system-arm -M lm3s6965evb -cpu arm926

Add some checking in the NVIC and CPU realize functions that the
user isn't trying to use an NVIC without an M-profile CPU or
an M-profile CPU without an NVIC, so we can produce a helpful
error message rather than a core dump.

Fixes: https://bugs.launchpad.net/qemu/+bug/1766896
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180601160355.15393-1-peter.maydell@linaro.org
2018-06-15 15:23:34 +01:00
Shannon Zhao
1dcf367519 arm_gicv3_kvm: kvm_dist_get/put_priority: skip the registers banked by GICR_IPRIORITYR
While for_each_dist_irq_reg loop starts from GIC_INTERNAL, it forgot to
offset the date array and index. This will overlap the GICR registers
value and leave the last GIC_INTERNAL irq's registers out of update.

Fixes: 367b9f527b
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-15 14:57:13 +01:00
Cédric Le Goater
bf358b541b xics_kvm: use KVM helpers
The KVM helpers hide the low level interface used to communicate to
the XICS KVM device and provide a good cleanup to the XICS KVM models.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12 10:44:36 +10:00
Shannon Zhao
910e204841 arm_gicv3_kvm: kvm_dist_get/put: skip the registers banked by GICR
While we skip the GIC_INTERNAL irqs, we don't change the register offset
accordingly. This will overlap the GICR registers value and leave the
last GIC_INTERNAL irq's registers out of update.

Fix this by skipping the registers banked by GICR.

Also for migration compatibility if the migration source (old version
qemu) doesn't send gicd_no_migration_shift_bug = 1 to destination, then
we shift the data of PPI to get the right data for SPI.

Fixes: 367b9f527b
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Message-id: 1527816987-16108-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:32 +01:00
Peter Maydell
f67c9b693a acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
 cleanups, NFIT ACPI table.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
 LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
 EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
 odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
 a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
 KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
 =3+V0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi, vhost, misc: fixes, features

vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (31 commits)
  vhost-blk: turn on pre-defined RO feature bit
  ACPI testing: test NFIT platform capabilities
  nvdimm, acpi: support NFIT platform capabilities
  tests/.gitignore: add entry for generated file
  arch_init: sort architectures
  ui: use local path for local headers
  qga: use local path for local headers
  colo: use local path for local headers
  migration: use local path for local headers
  usb: use local path for local headers
  sd: fix up include
  vhost-scsi: drop an unused include
  ppc: use local path for local headers
  rocker: drop an unused include
  e1000e: use local path for local headers
  ioapic: fix up includes
  ide: use local path for local headers
  display: use local path for local headers
  trace: use local path for local headers
  migration: drop an unused include
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04 10:15:16 +01:00
Michael S. Tsirkin
455e17a1b8 ioapic: fix up includes
include files shouldn't have the "include/" part, that is implied.

Also, drop an unused include.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01 19:20:37 +03:00
Shannon Zhao
2f15b79280 KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice
kvm_irqchip_create called by kvm_init will call kvm_init_irq_routing to
initialize global capability variables. If we call kvm_init_irq_routing in
GIC realize function, previous allocated memory will leak.

Fix this by deleting the unnecessary call.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1527750994-14360-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-31 16:32:35 +01:00
Shannon Zhao
34ffacae08 arm_gicv3_kvm: increase clroffset accordingly
It forgot to increase clroffset during the loop. So it only clear the
first 4 bytes.

Fixes: 367b9f527b
Cc: qemu-stable@nongnu.org
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1527047633-12368-1-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-31 14:50:51 +01:00
Jan Kiszka
887aae10f6 hw/intc/arm_gicv3: Fix APxR<n> register dispatching
There was a nasty flip in identifying which register group an access is
targeting. The issue caused spuriously raised priorities of the guest
when handing CPUs over in the Jailhouse hypervisor.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 28b927d3-da58-bce4-cc13-bfec7f9b1cb9@siemens.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-31 14:50:51 +01:00
Mark Cave-Ayland
a5ed75fe2e heathrow: remove obsolete heathow_init() function
Instead wire up heathrow to the CPU and grackle PCI host using qdev GPIOs.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Aaron Lindsay
d5a5e4c93d target/arm: Fetch GICv3 state directly from CPUARMState
This eliminates the need for fetching it from el_change_hook_opaque, and
allows for supporting multiple el_change_hooks without having to hack
something together to find the registered opaque belonging to GICv3.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1523997485-1905-6-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-26 11:04:39 +01:00
Peter Maydell
a2e2d7fc46 hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses
If the GIC has the security extension support enabled, then a
non-secure access to ICC_PMR must take account of the non-secure
view of interrupt priorities, where real priorities 0x00..0x7f
are secure-only and not visible to the non-secure guest, and
priorities 0x80..0xff are shown to the guest as if they were
0x00..0xff. We had the logic here wrong:
 * on reads, the priority is in the secure range if bit 7
   is clear, not if it is set
 * on writes, we want to set bit 7, not mask everything else

Our ICC_RPR read code had the same error as ICC_PMR.

(Compare the GICv3 spec pseudocode functions ICC_RPR_EL1
and ICC_PMR_EL1.)

Fixes: https://bugs.launchpad.net/qemu/+bug/1748434
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20180315133441.24149-1-peter.maydell@linaro.org
2018-03-23 18:26:45 +00:00
Paolo Bonzini
80d2b933f9 openpic_kvm: drop address_space_to_flatview call
The MemoryListener is registered on address_space_memory, there is
not much to assert.  This currently works because the callback
is invoked only once when the listener is registered, but section->fv
is the _new_ FlatView, not the old one on later calls and that
would break.

This confines address_space_to_flatview to exec.c and memory.c.

Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06 14:01:27 +01:00
Mark Cave-Ayland
f7bd7941d8 openpic: move OpenPIC state and related definitions to openpic.h
This is to faciliate access to OpenPICState when wiring up the PIC to the macio
controller.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-06 13:16:29 +11:00
Mark Cave-Ayland
8d085cf03b openpic: move KVM-specific declarations into separate openpic_kvm.h file
This is needed before the next patch because the target-dependent kvm stub
uses the existing kvm_openpic_connect_vcpu() declaration, making it impossible
to move the device-specific declarations into the same file without breaking
ppc-linux-user compilation.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-06 13:16:29 +11:00
Mark Cave-Ayland
c29646009a heathrow: change heathrow_pic_init() to return the heathrow device
This enables the device to be made available during the setup of the Old World
machine. In order to pass back the previous set of IRQs we temporarily introduce
a new pic_irqs parameter until it can be removed.

An additional benefit of this change is that it is also possible to remove the
pic_mem pointer used for macio by accessing the memory region via sysbus.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-06 13:16:29 +11:00
Mark Cave-Ayland
ec7c2709d7 heathrow: convert to trace-events
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-06 13:16:29 +11:00
Mark Cave-Ayland
086df4f30a heathrow: QOMify heathrow PIC
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-06 13:16:29 +11:00
Viktor Mihajlovski
9d0306dfdf qmp: expose s390-specific CPU info
Presently s390x is the only architecture not exposing specific
CPU information via QMP query-cpus. Upstream discussion has shown
that it could make sense to report the architecture specific CPU
state, e.g. to detect that a CPU has been stopped.

With this change the output of query-cpus will look like this on
s390:

   [
     {"arch": "s390", "current": true,
      "props": {"core-id": 0}, "cpu-state": "operating", "CPU": 0,
      "qom_path": "/machine/unattached/device[0]",
      "halted": false, "thread_id": 63115},
     {"arch": "s390", "current": false,
      "props": {"core-id": 1}, "cpu-state": "stopped", "CPU": 1,
      "qom_path": "/machine/unattached/device[1]",
      "halted": true, "thread_id": 63116}
   ]

This change doesn't add the s390-specific data to HMP 'info cpus'.
A follow-on patch will remove all architecture specific information
from there.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1518797321-28356-2-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26 12:55:26 +01:00
Peter Maydell
12fbf1a163 hw/intc/armv7m_nvic: Fix byte-to-interrupt number conversions
In many of the NVIC registers relating to interrupts, we
have to convert from a byte offset within a register set
into the number of the first interrupt which is affected.
We were getting this wrong for:
 * reads of NVIC_ISPR<n>, NVIC_ISER<n>, NVIC_ICPR<n>, NVIC_ICER<n>,
   NVIC_IABR<n> -- in all these cases we were missing the "* 8"
   needed to convert from the byte offset to the interrupt number
   (since all these registers use one bit per interrupt)
 * writes of NVIC_IPR<n> had the opposite problem of a spurious
   "* 8" (since these registers use one byte per interrupt)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180209165810.6668-9-peter.maydell@linaro.org
2018-02-15 18:29:49 +00:00
Peter Maydell
24ac0fb129 hw/intc/armv7m_nvic: Implement SCR
We were previously making the system control register (SCR)
just RAZ/WI. Although we don't implement the functionality
this register controls, we should at least provide the state,
including the banked state for v8M.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180209165810.6668-7-peter.maydell@linaro.org
2018-02-15 18:29:49 +00:00
Peter Maydell
43bbce7fbe hw/intc/armv7m_nvic: Implement cache ID registers
M profile cores have a similar setup for cache ID registers
to A profile:
 * Cache Level ID Register (CLIDR) is a fixed value
 * Cache Type Register (CTR) is a fixed value
 * Cache Size ID Registers (CCSIDR) are a bank of registers;
   which one you see is selected by the Cache Size Selection
   Register (CSSELR)

The only difference is that they're in the NVIC memory mapped
register space rather than being coprocessor registers.
Implement the M profile view of them.

Since neither Cortex-M3 nor Cortex-M4 implement caches,
we don't need to update their init functions and can leave
the ctr/clidr/ccsidr[] fields in their ARMCPU structs at zero.
Newer cores (like the Cortex-M33) will want to be able to
set these ID registers to non-zero values, though.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180209165810.6668-6-peter.maydell@linaro.org
2018-02-15 18:29:49 +00:00
Peter Maydell
ae7c5c855b hw/intc/armv7m_nvic: Implement v8M CPPWR register
The Coprocessor Power Control Register (CPPWR) is new in v8M.
It allows software to control whether coprocessors are allowed
to power down and lose their state. QEMU doesn't have any
notion of power control, so we choose the IMPDEF option of
making the whole register RAZ/WI (indicating that no coprocessors
can ever power down and lose state).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180209165810.6668-5-peter.maydell@linaro.org
2018-02-15 18:29:49 +00:00
Peter Maydell
e8ab26c484 hw/intc/armv7m_nvic: Implement M profile cache maintenance ops
For M profile cores, cache maintenance operations are done by
writing to special registers in the system register space.
For QEMU, cache operations are always NOPs, since we don't
implement the cache. Implementing these explicitly avoids
a spurious LOG_GUEST_ERROR when the guest uses them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180209165810.6668-4-peter.maydell@linaro.org
2018-02-15 18:29:49 +00:00
Peter Maydell
4f2eff36ad hw/intc/armv7m_nvic: Fix ICSR PENDNMISET/CLR handling
The PENDNMISET/CLR bits in the ICSR should be RAZ/WI from
NonSecure state if the AIRCR.BFHFNMINS bit is zero. We had
misimplemented this as making the bits RAZ/WI from both
Secure and NonSecure states. Fix this bug by checking
attrs.secure so that Secure code can pend and unpend NMIs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180209165810.6668-3-peter.maydell@linaro.org
2018-02-15 18:29:49 +00:00
Peter Maydell
5a53e2c1dc hw/intc/armv7m_nvic: Don't hardcode M profile ID registers in NVIC
Instead of hardcoding the values of M profile ID registers in the
NVIC, use the fields in the CPU struct. This will allow us to
give different M profile CPU types different ID register values.

This commit includes the addition of the missing ID_ISAR5,
which exists as RES0 in both v7M and v8M.

(The values of the ID registers might be wrong for the M4 --
this commit leaves the behaviour there unchanged.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180209165810.6668-2-peter.maydell@linaro.org
2018-02-15 18:29:49 +00:00
Peter Maydell
7e0019a719 Miscellaneous patches for 2018-02-07
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJafZmjAAoJEDhwtADrkYZTuvkP/i8gYzquYW/8u0XiGjQdi0VM
 cZzxqLe9DSxfjRO9p0D11uLQmw3js8z60mi++1NOhtYTn4P/htsgXLrrxrLS8U0I
 b+mD6LeqGN2miCKWy4X/w52S0krW05ROJMb/s+OQP7aJu/OA+t6QXM6jzIPOnFa+
 GrxFesOizvjLVONvmI8nbUKXayJ77rB8ctsuCjmbMO1XkxMLPWLchduswFH7ywbL
 ZJwUK3v1x+R0Apvy7y4f8e6aamreABtAjuD53zoS1PmLfZ4dvgYVJkhimIGsVjpA
 8AGCbazsIWl7YLJ2dghXaVE2gwV3LrwTPhoF0YeSjrJ2f4TE7NPCaPZW3C9yTtQC
 YEiD4cG5HNE7HhBRIImmTvOGU7sSmYwJQ4+5yGKtJGlBGRSbYP2upWf3nEsOnGPx
 TkdcsEPQHEP/YuJlZpO4jfdUiBAQsbmyY3xnMvdpfhDJRGSB7UwQ1xTgmjIXOr15
 6Zv4NaWB0JInGhoEAra4Jdld3fJ0Nh+XAXITAPogppipvxmIYz9AxZTjhu0cQWX6
 dDvk3FSOuC8Y+r/6UxQkAwCNAld+GilAABgHtXQjx8b8ySlE98EKuvcmPaH4pemC
 K0YoRF32rIoDLbh6xg++ior7+eABrk9STlqCI/3SSEgDr0loTyXnI5KBBNoz+Jjw
 AU2c5RYvNOqEGT42bL/C
 =DMbf
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging

Miscellaneous patches for 2018-02-07

# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2018-02-07-v4:
  Move include qemu/option.h from qemu-common.h to actual users
  Drop superfluous includes of qapi/qmp/qjson.h
  Drop superfluous includes of qapi/qmp/dispatch.h
  Include qapi/qmp/qnull.h exactly where needed
  Include qapi/qmp/qnum.h exactly where needed
  Include qapi/qmp/qbool.h exactly where needed
  Include qapi/qmp/qstring.h exactly where needed
  Include qapi/qmp/qdict.h exactly where needed
  Include qapi/qmp/qlist.h exactly where needed
  Include qapi/qmp/qobject.h exactly where needed
  qdict qlist: Make most helper macros functions
  Eliminate qapi/qmp/types.h
  Typedef the subtypes of QObject in qemu/typedefs.h, too
  Include qmp-commands.h exactly where needed
  Drop superfluous includes of qapi/qmp/qerror.h
  Include qapi/error.h exactly where needed
  Drop superfluous includes of qapi-types.h and test-qapi-types.h
  Clean up includes
  Use #include "..." for our own headers, <...> for others
  vnc: use stubs for CONFIG_VNC=n dummy functions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 14:39:09 +00:00
Peter Maydell
f31cd9e4e2 target-arm queue:
* Support M profile derived exceptions on exception entry and exit
  * Implement AArch64 v8.2 crypto insns (SHA-512, SHA-3, SM3, SM4)
  * Implement working i.MX6 SD controller
  * Various devices preparatory to i.MX7 support
  * Preparatory patches for SVE emulation
  * v8M: Fix bug in implementation of 'TT' insn
  * Give useful error if user tries to use userspace GICv3 with KVM
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJafX+DAAoJEDwlJe0UNgzegGgP/2OepsVnpg++NkBpJdCq0wjC
 DFaGLpDqaXabv0E5b56flkqBsK6mO2vXoIiWOLF3f25G5pBf5zu7XOEYXWuOIBEP
 Yr/vl4/yWRZfiNKl6aPC5HwHKN8SWMV+Mp/GtKz0PtHLY+oGl3fBRBu8fbeoOyj9
 3x+HB0c5fpAtWrRoS+XrUJfQPdkkZ4c5lDvpxec57cqOzJ8qYZEcFCi7WP3Rglox
 sQJEls5IXkOVGx35o7k0rIw0qzcV8iCGBsuA+4QAonxE5B0ip6aolPAaq+gf/mLP
 StX2UJG9JO5tOhaNBexHE/QwLNu2pver8mghIyluirLvisB6kx+dEoa0Zj/7J7or
 LD9O6pqpSPCCKLSw0xPOl2FqjXzbIYcjgddxrOGvUQgAhdagB2EeRHiCdZ7hQXvm
 Pg4gAsIAZURPrbj7LaXgDCzM0IP6bZjNR2U+C0ekJDBRJb/NTLcvlmx3MQo3s4ot
 s/t6FP728tnmMk7ib8w95oo2oSMiPUZBfj2IMYogXgY+pup0OunKwOQL93Lmj4By
 LJwawcsa/9ctyzF/XvBUHO/n4l0zZi3wLmtVojbxkxtHiFmvv5gQMlyHYM08aTJ1
 Vu/V0tiX6+oXoNrJg5e8TAchsS5PmO54Sj/ywMm5Q8FWfBE19KTRl5BatxbMYahU
 gQQt64esxQQFxxjdSrZY
 =bokK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180209' into staging

target-arm queue:
 * Support M profile derived exceptions on exception entry and exit
 * Implement AArch64 v8.2 crypto insns (SHA-512, SHA-3, SM3, SM4)
 * Implement working i.MX6 SD controller
 * Various devices preparatory to i.MX7 support
 * Preparatory patches for SVE emulation
 * v8M: Fix bug in implementation of 'TT' insn
 * Give useful error if user tries to use userspace GICv3 with KVM

# gpg: Signature made Fri 09 Feb 2018 11:01:23 GMT
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180209: (30 commits)
  hw/core/generic-loader: Allow PC to be set on command line
  target/arm/translate.c: Fix missing 'break' for TT insns
  target/arm/kvm: gic: Prevent creating userspace GICv3 with KVM
  target/arm: Add SVE state to TB->FLAGS
  target/arm: Add ZCR_ELx
  target/arm: Add SVE to migration state
  target/arm: Add predicate registers for SVE
  target/arm: Expand vector registers for SVE
  hw/arm: Move virt's PSCI DT fixup code to arm/boot.c
  usb: Add basic code to emulate Chipidea USB IP
  i.MX: Add implementation of i.MX7 GPR IP block
  i.MX: Add i.MX7 GPT variant
  i.MX: Add code to emulate GPCv2 IP block
  i.MX: Add code to emulate i.MX7 SNVS IP-block
  i.MX: Add code to emulate i.MX2 watchdog IP block
  i.MX: Add code to emulate i.MX7 CCM, PMU and ANALOG IP blocks
  hw: i.MX: Convert i.MX6 to use TYPE_IMX_USDHC
  sdhci: Add i.MX specific subtype of SDHCI
  target/arm: enable user-mode SHA-3, SM3, SM4 and SHA-512 instruction support
  target/arm: implement SM4 instructions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 13:27:40 +00:00
Markus Armbruster
e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Andrey Smirnov
0999e87fa5 i.MX: Add code to emulate GPCv2 IP block
Add minimal code needed to allow upstream Linux guest to boot.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 10:40:30 +00:00
Peter Maydell
6c94851881 target/arm: Split "get pending exception info" from "acknowledge it"
Currently armv7m_nvic_acknowledge_irq() does three things:
 * make the current highest priority pending interrupt active
 * return a bool indicating whether that interrupt is targeting
   Secure or NonSecure state
 * implicitly tell the caller which is the highest priority
   pending interrupt by setting env->v7m.exception

We need to split these jobs, because v7m_exception_taken()
needs to know whether the pending interrupt targets Secure so
it can choose to stack callee-saves registers or not, but it
must not make the interrupt active until after it has done
that stacking, in case the stacking causes a derived exception.
Similarly, it needs to know the number of the pending interrupt
so it can read the correct vector table entry before the
interrupt is made active, because vector table reads might
also cause a derived exception.

Create a new armv7m_nvic_get_pending_irq_info() function which simply
returns information about the highest priority pending interrupt, and
use it to rearrange the v7m_exception_taken() code so we don't
acknowledge the exception until we've done all the things which could
possibly cause a derived exception.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1517324542-6607-3-git-send-email-peter.maydell@linaro.org
2018-02-09 10:40:27 +00:00
Peter Maydell
5ede82b8cc target/arm: Add armv7m_nvic_set_pending_derived()
In order to support derived exceptions (exceptions generated in
the course of trying to take an exception), we need to be able
to handle prioritizing whether to take the original exception
or the derived exception.

We do this by introducing a new function
armv7m_nvic_set_pending_derived() which the exception-taking code in
helper.c will call when a derived exception occurs.  Derived
exceptions are dealt with mostly like normal pending exceptions, so
we share the implementation with the armv7m_nvic_set_pending()
function.

Note that the way we structure this is significantly different
from the v8M Arm ARM pseudocode: that does all the prioritization
logic in the DerivedLateArrival() function, whereas we choose to
let the existing "identify highest priority exception" logic
do the prioritization for us. The effect is the same, though.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1517324542-6607-2-git-send-email-peter.maydell@linaro.org
2018-02-09 10:40:27 +00:00
David Hildenbrand
6762808fda s390x/flic: cache the common flic class in a central function
This avoids tons of conversions when handling interrupts.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
c21a6106c1 s390x/kvm: cache the kvm flic in a central function
This avoids tons of conversions when handling interrupts.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
f68ecdd4f3 s390x/tcg: cache the qemu flic in a central function
This avoids tons of conversions when handling interrupts.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
631b59664c s390x/flic: optimize CPU wakeup for TCG
Kicking all CPUs on every floating interrupt is far from efficient.
Let's optimize it at least a little bit.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
6e0d8175d6 s390x/flic: implement qemu_s390_clear_io_flic()
Now that we have access to the io interrupts, we can implement
clear_io_irq() for TCG.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
b194e44785 s390x/flic: make floating interrupts on TCG actually floating
Move floating interrupt handling into the flic. Floating interrupts
will now be considered by all CPUs, not just CPU #0. While at it, convert
I/O interrupts to use a list and make sure we properly consider I/O
sub-classes in s390_cpu_has_io_int().

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
d8d7942df6 s390x/flic: no need to call s390_io_interrupt() from flic
We can directly call the right function.

Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
e6505d5395 s390x/flic: factor out injection of floating interrupts
Let the flic device handle it internally. This will allow us to later
on store floating interrupts in the flic for the TCG case.

This now also simplifies kvm.c. All that's left is the fallback
interface for floating interrupts, which is now triggered directly via
the flic in case anything goes wrong.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
b03d9970c4 s390x/tcg: simplify lookup of flic
We can simply search for an object of our common type.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
e2ac12f014 s390x/flic: simplify flic initialization
This makes it clearer, which device is used for which accelerator.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
Philippe Mathieu-Daudé
bf85388169 qdev: use device_class_set_parent_realize/unrealize/reset()
changes generated using the following Coccinelle patch:

  @@
  type DeviceParentClass;
  DeviceParentClass *pc;
  DeviceClass *dc;
  identifier parent_fn;
  identifier child_fn;
  @@
  (
  +device_class_set_parent_realize(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->realize;
  ...
  -dc->realize = child_fn;
  |
  +device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->unrealize;
  ...
  -dc->unrealize = child_fn;
  |
  +device_class_set_parent_reset(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->reset;
  ...
  -dc->reset = child_fn;
  )

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180114020412.26160-4-f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-05 13:54:38 +01:00
Alistair Francis
b350735ef6 xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device
This is the initial version of the Inter Processor Interrupt device.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2018-01-26 11:09:09 +01:00
Alistair Francis
c859b566e8 xlnx-pmu-iomod-intc: Add the PMU Interrupt controller
Add the PMU IO Module Interrupt controller device.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2018-01-26 11:09:09 +01:00
Peter Maydell
2077fef91d target-arm queue:
* target/arm: Fix address truncation in 64-bit pagetable walks
  * i.MX: Fix FEC/ENET receive functions
  * target/arm: preparatory refactoring for SVE emulation
  * hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
  * hw/intc/arm_gic: Fix C_RPR value on idle priority
  * hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
  * hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
  * hw/arm/virt: Check that the CPU realize method succeeded
  * sdhci: fix a NULL pointer dereference due to uninitialized AddressSpace object
  * xilinx_spips: Correct usage of an uninitialized local variable
  * pl110: Implement vertical compare/next base interrupts
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJaadStAAoJEDwlJe0UNgzeABwP/jJs1ajbRnnwr2eFYno9Wa7p
 jpSHD/4pxMbZVYAPrc5z+EoPw8Fy/qETlzRLlcO4KfmrxHotpoKEPAQBIOohs7Uy
 PZgPhVqic1hAQBlp2wkK9SSL5XFyfI0PHCY3Rb0dGWPSu5eoLlXCglbgajOBbM9r
 t/0KUQPhILfYeDbZ7oO6XLC51F87M0zxmE5GG2Z8feHDSw2zqmZc/jw8nGNkQXKr
 0gniMN2QQyxKEjp6zYa9lmCnvpBMErKo3xl9J3tZ2TgzOSWaX0S1gk3FWh0kNYhk
 ktnnimUzku/gOoCorMf5o7nPCNQqpR4Jgpw3S27j7WfgxGyrgfxT74k4XR/g8nNO
 LGkNzlsdEjHpVe8wTPQZ4LtPcw8ozHQB/Yu77iRaweQipk6PeyoUuoMDrxHq0oX6
 W9rgvwmOJu2xmHyUe1NZuUwiZ9xdidlFg+9TMENLkbzb2xzxYa1qmbVQz7u5d7cx
 zPgy9iy7S77wAwPwHgul3sQlVLxxKSi7Iw+Ka+51uEJ3pbW/JPpZCATi00LGjQZF
 41j5wOPj/LR+B0peay4cneF9DDR5Vxqe+Lg1QMicaj74xP1Q+dvVwvE5e3/XUaiT
 nr42iNjK0HJCqyvvkd6u/ONW8rbSmeL5FF5eEzC6DxAArTBkdJ90tFklinMH/Ovy
 oaBPvo5zP8TSqwDMx6yc
 =aF9Y
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180125' into staging

target-arm queue:
 * target/arm: Fix address truncation in 64-bit pagetable walks
 * i.MX: Fix FEC/ENET receive functions
 * target/arm: preparatory refactoring for SVE emulation
 * hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
 * hw/intc/arm_gic: Fix C_RPR value on idle priority
 * hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
 * hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
 * hw/arm/virt: Check that the CPU realize method succeeded
 * sdhci: fix a NULL pointer dereference due to uninitialized AddressSpace object
 * xilinx_spips: Correct usage of an uninitialized local variable
 * pl110: Implement vertical compare/next base interrupts

# gpg: Signature made Thu 25 Jan 2018 12:59:25 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180125: (21 commits)
  pl110: Implement vertical compare/next base interrupts
  xilinx_spips: Correct usage of an uninitialized local variable
  sdhci: fix a NULL pointer dereference due to uninitialized AddresSpace object
  hw/arm/virt: Check that the CPU realize method succeeded
  hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
  hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
  hw/intc/arm_gic: Fix C_RPR value on idle priority
  hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
  target/arm: Simplify fp_exception_el for user-only
  target/arm: Hoist store to flags output in cpu_get_tb_cpu_state
  target/arm: Move cpu_get_tb_cpu_state out of line
  target/arm: Add ARM_FEATURE_SVE
  vmstate: Add VMSTATE_UINT64_SUB_ARRAY
  target/arm: Add aa{32, 64}_vfp_{dreg, qreg} helpers
  target/arm: Change the type of vfp.regs
  target/arm: Use pointers in neon tbl helper
  target/arm: Use pointers in neon zip/uzp helpers
  target/arm: Use pointers in crypto helpers
  target/arm: Mark disas_set_insn_syndrome inline
  i.MX: Fix FEC/ENET receive funtions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 17:04:47 +00:00
Luc MICHEL
421a3c224e hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
When C_CTRL.CBPR is 1, the Non-Secure view of C_BPR is altered:
  - A Non-Secure read of C_BPR should return the BPR value plus 1,
  saturated to 7,
  - A Non-Secure write should be ignored.

Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-6-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed comment typo]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:30 +00:00
Luc MICHEL
fc05a6f22a hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
When determining the group priority of a group 1 IRQ, if C_CTRL.CBPR is
0, the non-secure BPR value is used. However, this value must be
incremented by one so that it matches the secure world number of
implemented priority bits (NS world has one less priority bit compared
to the Secure world).

Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-5-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: add assert, as the gicv3 code has]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:30 +00:00
Luc MICHEL
71aa735b0a hw/intc/arm_gic: Fix C_RPR value on idle priority
When there is no active interrupts in the GIC, a read to the C_RPR
register should return the value of the "Idle priority", which is either
the maximum value an IRQ priority field can be set to, or 0xff.

Since the QEMU GIC model implements all the 8 priority bits, the Idle
priority is 0xff.

Internally, when there is no active interrupt, the running priority
value is 0x100. The gic_get_running_priority function returns an uint8_t
and thus, truncate this value to 0x00 when returning it. This is wrong since
a value of 0x00 correspond to the maximum possible priority.

This commit fixes the returned value when the internal value is 0x100.

Note that it is correct for the Non-Secure view to return 0xff even
though from the NS world point of view, only 7 priority bits are
implemented. The specification states that the Idle priority can be 0xff
even when not all the 8 priority bits are implemented. This has been
verified against a real GICv2 hardware on a Xilinx ZynqMP based board.

Regarding the ARM11MPCore version of the GIC, the specification is not
clear on that point, so this commit does not alter its behavior.

Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-4-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:30 +00:00
Luc MICHEL
91f4e18d95 hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
In the GIC, when an IRQ is acknowledged, its state goes from "pending"
to:
   - "active" if the corresponding IRQ pin has been de-asserted
   - "active and pending" otherwise.
The GICv2 manual states that when a IRQ becomes active (or active and
pending), the GIC should either signal another (higher priority) IRQ to
the CPU if there is one, or de-assert the CPU IRQ pin.

The current implementation of the GIC in QEMU does not check if the
IRQ is already active when looking for pending interrupts with
sufficient priority in gic_update(). This can lead to signaling an
interrupt that is already active.

This usually happens when splitting priority drop and interrupt
deactivation. On priority drop, the IRQ stays active until deactivation.
If it becomes pending again, chances are that it will be incorrectly
selected as best_irq in gic_update().

This commit fixes this by checking if the IRQ is not already active when
looking for best_irq in gic_update().

Note that regarding the ARM11MPCore GIC version, the corresponding
manual is not clear on that point, but it has has no priority
drop/interrupt deactivation separation, so this case should not happen.

Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-3-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:29 +00:00
Jean-Christophe Dubois
05b9ec96c1 sparc/leon3 irqmp: fix IRQ software ack
With the LEON3 IRQ controller IRQs can be acknowledged 2 ways:
* Explicitly by software writing to the CLEAR_OFFSET register
* Implicitly when the procesor is done running the trap handler attached
  to the IRQ.

The actual IRQMP code only allows the implicit processor triggered IRQ ack.
If software write explicitly to the CLEAR_OFFSET register, this will clear
the pending bit in the register value but this will not lower the ongoing
raised IRQ with the processor. The IRQ will be kept raised to the LEON
processor until the related trap handler is run and the processor implicitly
ack the interrupt. So with the actual IRQMP code trap handler have to be run
even if the software has already done its job by clearing the pending bit.

This feature has been tested on another LEON3 simulator (tsim_leon3 from
Gaisler) and it turns out that the Qemu implementation is not equivalent to
the tsim one. In tsim, if software does clear a pending interrupt before
the related interrupt handler is triggered the said interrupt handler will
not be called.

This patch brings the Qemu IRQMP implementation in line with the tsim
implementation by allowing IRQ to be acknowledged by software only.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-01-24 19:19:50 +00:00
Alistair Francis
a89f364ae8 Replace all occurances of __FUNCTION__ with __func__
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.

One line in hcd-musb.c was manually tweaked to pass checkpatch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-01-22 09:46:18 +01:00
Peter Maydell
4b9774ef48 hw/intc/armv7m: Support byte and halfword accesses to CFSR
The Configurable Fault Status Register for ARMv7M and v8M is
supposed to be byte and halfword accessible, but we were only
implementing word accesses. Add support for the other access
sizes, which are used by the Zephyr RTOS.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512742372-31517-1-git-send-email-peter.maydell@linaro.org
2018-01-16 13:28:09 +00:00
Peter Maydell
0cf0985201 hw/intc/arm_gic: reserved register addresses are RAZ/WI
The GICv2 specification says that reserved register addresses
must RAZ/WI; now that we implement external abort handling
for Arm CPUs this means we must return MEMTX_OK rather than
MEMTX_ERROR, to avoid generating a spurious guest data abort.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
2018-01-11 13:25:40 +00:00
Peter Maydell
f1945632b4 hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
The GICv3 specification says that reserved register addresses
should RAZ/WI. This means we need to return MEMTX_OK, not MEMTX_ERROR,
because now that we support generating external aborts the
latter will cause an abort on new board models.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
2018-01-11 13:25:40 +00:00
Mark Cave-Ayland
f5980f757c sun4m: remove include/hw/sparc/sun4m.h and all references to it
With the previous commit there is now nothing left in sun4m.h so it can be
removed, along with all remaining references to it.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09 21:48:20 +00:00
Sergio Andres Gomez Del Real
2cb9f06e3d apic: add function to apic that will be used by hvf
This patch adds the function apic_get_highest_priority_irr to
apic.c and exports it through the interface in apic.h for use by hvf.

Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-8-Sergio.G.DelReal@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-22 15:01:19 +01:00
Peter Xu
b8c7723440 i8259: move TYPE_INTERRUPT_STATS_PROVIDER upper
Now both classes (i8259, i8259-kvm) support this.  Move this upper to
the common class code.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171210063819.14892-6-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21 09:30:32 +01:00
Peter Xu
e267d16496 kvm-i8259: support "info pic" and "info irq"
Let's leverage the i8259 common code for kvm-i8259 too.

I think it's still possible that stats can lost when i8259 is in kernel
and meanwhile when irqfd is used, e.g., by vfio or vhost devices.
However that should be rare IMHO since they should be using MSIs mostly
if they really want performance (that's why people use vhost and device
assignment), and no old INTx should be used.  As long as the INTx users
are emulated in QEMU the stats will be correct.

For "info pic", it should be always accurate since we fetch kvm regs
before dump.

More importantly, it's just too simple to do this now - it's only 10+
LOC to gain this feature.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171210063819.14892-5-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21 09:30:32 +01:00
Peter Xu
1b23190aba i8259: generalize statistics into common code
It was only for userspace i8259.  Move it to general code so that
kvm-i8259 can also use it in the future.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171210063819.14892-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21 09:30:32 +01:00
Peter Xu
f260f7361c i8259: use DEBUG_IRQ_COUNT always
It's not really scary to even enable it forever.  After all it's i8259,
and it's even not the kernel one.

Then we can remove quite a few of lines to make it cleaner.  And "info
irq" will always work for it.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171210063819.14892-3-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21 09:30:32 +01:00
Peter Xu
0880a87300 i8259: convert DPRINTFs into trace
One thing to mention is that in pic_set_irq() I need to uncomment a few
lines in the macros to make sure IRQ value calculation is correct.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171210063819.14892-2-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21 09:30:32 +01:00
Philippe Mathieu-Daudé
c0578de60f misc: drop old i386 dependency
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18 17:07:03 +03:00
Cédric Le Goater
7718375584 spapr: introduce a spapr_qirq() helper
xics_get_qirq() is only used by the sPAPR machine. Let's move it there
and change its name to reflect its scope. It will be useful for XIVE
support which will use its own set of qirqs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15 09:49:24 +11:00
Cédric Le Goater
60c6823b9b spapr: move the IRQ allocation routines under the machine
Also change the prototype to use a sPAPRMachineState and prefix them
with spapr_irq_. It will let us synchronise the IRQ allocation with
the XIVE interrupt mode when available.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15 09:49:24 +11:00
Cédric Le Goater
ed0c37eedf ppc/xics: assign of the CPU 'intc' pointer under the core
The 'intc' pointer of the CPU references the interrupt presenter in
the XICS interrupt mode. When the XIVE interrupt mode is available and
activated, the machine will need to reassign this pointer to reflect
the change.

Moving this assignment under the realize routine of the CPU will ease
the process when the interrupt mode is toggled.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15 09:49:24 +11:00
Cédric Le Goater
4f7a47beeb ppc/xics: introduce an icp_create() helper
The sPAPR and the PowerNV core objects create the interrupt presenter
object of the CPUs in a very similar way. Let's provide a common
routine in which we use the presenter 'type' as a child identifier.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15 09:49:24 +11:00
Michael Davidsaver
df59227044 openpic: debug w/ info_report()
Replace *printf() with *_report().
Remove trailing new lines.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15 09:49:24 +11:00
Cédric Le Goater
e0f7110aca ppc/xics: remove useless if condition
The previous code section uses a 'first < 0' test and returns. Therefore,
there is no need to test the 'first' variable against '>= 0' afterwards.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15 09:49:23 +11:00
Peter Maydell
27f26bfed9 nvic: Make systick banked
For the v8M security extension, there should be two systick
devices, which use separate banked systick exceptions. The
register interface is banked in the same way as for other
banked registers, including the existence of an NS alias
region for secure code to access the nonsecure timer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512154296-5652-3-git-send-email-peter.maydell@linaro.org
2017-12-13 17:59:26 +00:00
Peter Maydell
62f018482c nvic: Make nvic_sysreg_ns_ops work with any MemoryRegion
Generalize nvic_sysreg_ns_ops so that we can pass it an
arbitrary MemoryRegion which it will use as the underlying
register implementation to apply the NS-alias behaviour
to. We'll want this so we can do the same with systick.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512154296-5652-2-git-send-email-peter.maydell@linaro.org
2017-12-13 17:59:26 +00:00
Eric Auger
ba2aecabef hw/intc/arm_gicv3_its: Implement full reset
Voiding the ITS caches is not supposed to happen via
individual register writes. So we introduced a dedicated
ITS KVM device ioctl to perform a cold reset of the ITS:
KVM_DEV_ARM_VGIC_GRP_CTRL/KVM_DEV_ARM_ITS_CTRL_RESET. Let's
use this latter if the kernel supports it.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1511883692-11511-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:23 +00:00
Eric Auger
c9aedf8ca4 hw/intc/arm_gicv3_its: Implement a minimalist reset
At the moment the ITS is not properly reset and this causes
various bugs on save/restore. We implement a minimalist reset
through individual register writes but for kernel versions
before v4.15 this fails voiding the vITS cache. We cannot
claim we have a comprehensive reset (hence the error message)
but that's better than nothing.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1511883692-11511-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:22 +00:00
Eric Auger
7e7244796b hw/intc/arm_gicv3_its: Don't call post_load on reset
From the very beginning, post_load() was called from common
reset. This is not standard and obliged to discriminate the
reset case from the restore case using the iidr value.

Let's get rid of that call.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1511883692-11511-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:22 +00:00
Peter Maydell
2b75ef01ca nvic: Fix ARMv7M MPU_RBAR reads
Fix an incorrect mask expression in the handling of v7M MPU_RBAR
reads that meant that we would always report the ADDR field as zero.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1509732813-22957-1-git-send-email-peter.maydell@linaro.org
2017-11-20 13:39:48 +00:00
Peter Maydell
62955e101e Miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAloMXN0UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNNAQf/e7/uT2tW7WNfamSOMYXswf0R6ak+
 KjVSG+qiNsKaZzXmMFkhm4n0u1vCW0VGEQGRHr0MoSCyyfhupzLRHxfHi8SytqTf
 S6wqNtIbOK0L8bW+U5vzADks33UCuuUNlVZeOAkEPaXiLlgxmBoHfyoXkIGemJc2
 epx5x22rloNQLaBoL7FGmAkQhQCSJg19hAtRLo0tkryCwBZ9P6a1K0aNAHU2RFaB
 LgRFcxwduwTydsHRYeQ8J7YR0fERle01QUB8y9tlOc8/d2x9yRPBWhPHwscKMv6I
 JwM0c2Mnw6Yqbwyj7snWty7epgUcHWrOVnZnaIpNW9Z8m/wgz28oZ3a09w==
 =6wL6
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Miscellaneous bugfixes

# gpg: Signature made Wed 15 Nov 2017 15:27:25 GMT
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  fix scripts/update-linux-headers.sh here document
  exec: Do not resolve subpage in mru_section
  util/stats64: Fix min/max comparisons
  cpu-exec: avoid cpu_exec_nocache infinite loop with record/replay
  cpu-exec: don't overwrite exception_index
  vhost-user-scsi: add missing virtqueue_size param
  target-i386: adds PV_TLB_FLUSH CPUID feature bit
  thread-posix: fix qemu_rec_mutex_trylock macro
  Makefile: simpler/faster "make help"
  ioapic/tracing: Remove last DPRINTFs
  Enable 8-byte wide MMIO for 16550 serial devices

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-16 14:42:54 +00:00
Dr. David Alan Gilbert
a2e6ffab97 ioapic/tracing: Remove last DPRINTFs
Remove the last few DPRINTFs from hw/intc/ioapic.c and turn
them into tracing.  In one case it's a new trace, in the others
it's just adding a parameter to the existing traces.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171102180310.24760-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-11-14 14:31:33 +01:00
Greg Kurz
dcb556fc6a xics/kvm: synchonize state before 'info pic'
When using the emulated XICS, the 'info pic' monitor command shows:

CPU 0 XIRR=ff000000 ((nil)) PP=ff MFRR=ff
ICS 1000..13ff 0x10040060340
  1000 MSI 05 00
  1001 MSI 05 00
  1002 MSI 05 00
  1003 MSI ff 00
  1004 LSI ff 00
  1005 LSI ff 00
  1006 LSI ff 00
  1007 LSI ff 00
  1008 MSI 05 00
  1009 MSI 05 00
  100a MSI 05 00
  100b MSI 05 00
  100c MSI 05 00

but when using the in-kernel XICS with the very same guest, we get:

CPU 0 XIRR=00000000 ((nil)) PP=ff MFRR=ff
ICS 1000..13ff 0x10032e00340
  1000 MSI ff 00
  1001 MSI ff 00
  1002 MSI ff 00
  1003 MSI ff 00
  1004 LSI ff 00
  1005 LSI ff 00
  1006 LSI ff 00
  1007 LSI ff 00
  1008 MSI ff 00
  1009 MSI ff 00
  100a MSI ff 00
  100b MSI ff 00
  100c MSI ff 00

ie, all irqs are masked and XIRR is null, while we should get the
same output as with the emulated XICS.

If the guest is then migrated, 'info pic' shows the expected values
on both source and destination.

The problem is that QEMU doesn't synchronize with KVM before printing
the XICS state. Migration happens to fix the output because it enforces
synchronization with KVM.

To fix the invalid output of 'info pic', this patch introduces a new
synchronize_state operation for both ICPStateClass and ICSStateClass.
The ICP operation relies on run_on_cpu() in order to kick the vCPU
and avoid sleeping on KVM_GET_ONE_REG.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-11-14 11:12:42 +11:00
Eric Auger
8a7348b5d6 hw/intc/arm_gicv3_its: Don't abort on table save failure
The ITS is not fully properly reset at the moment. Caches are
not emptied.

After a reset, in case we attempt to save the state before
the bound devices have registered their MSIs and after the
1st level table has been allocated by the ITS driver
(device BASER is valid), the first level entries are still
invalid. If the device cache is not empty (devices registered
before the reset), vgic_its_save_device_tables fails with -EINVAL.
This causes a QEMU abort().

Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: wanghaibin <wanghaibin.wang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-07 13:03:52 +00:00
Shanker Donthineni
3a575cd2c2 hw/intc/arm_gicv3_its: Fix the VM termination in vm_change_state_handler()
The commit cddafd8f35 ("hw/intc/arm_gicv3_its: Implement state save
/restore") breaks the backward compatibility with the older kernels
where vITS save/restore support is not available. The vmstate function
vm_change_state_handler() should not be registered if the running kernel
doesn't support ITS save/restore feature. Otherwise VM instance will be
killed whenever vmstate callback function is invoked.

Observed a virtual machine shutdown with QEMU-2.10+linux-4.11 when testing
the reboot command "virsh reboot <domain> --mode acpi" instead of reboot.

KVM Error: 'KVM_SET_DEVICE_ATTR failed: Group 4 attr 0x00000000000001'

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1509712671-16299-1-git-send-email-shankerd@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-07 13:03:51 +00:00
Stafford Horne
0ca9fa2e3c openrisc/ompic: Add OpenRISC Multicore PIC (OMPIC)
Add OpenRISC Multicore PIC which handles inter processor interrupts
(IPI) between cores.  In OpenRISC all device interrupts are routed to
each core enabling this device to be simple.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-10-21 06:35:47 +09:00
Peter Maydell
cf5f7937b0 nvic: Fix miscalculation of offsets into ITNS array
This calculation of the first exception vector in
the ITNS<n> register being accessed:
        int startvec = 32 * (offset - 0x380) + NVIC_FIRST_IRQ;

is incorrect, because offset is in bytes, so we only want
to multiply by 8.

Spotted by Coverity (CID 1381484, CID 1381488), though it is
not correct that it actually overflows the buffer, because
we have a 'startvec + i < s->num_irq' guard.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1507650856-11718-1-git-send-email-peter.maydell@linaro.org
2017-10-12 16:33:16 +01:00
Peter Maydell
a94bb9cd58 nvic: Add missing 'break'
Coverity points out that we forgot the 'break' for
the SAU_CTRL write case (CID1381683). This has
no actual visible consequences because it happens
that the following case is effectively a no-op.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1507742676-9908-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-12 13:24:39 +01:00
Peter Maydell
04829ce334 nvic: Add missing code for writing SHCSR.HARDFAULTPENDED bit
When we added support for the new SHCSR bits in v8M in commit
437d59c17e the code to support writing to the new HARDFAULTPENDED
bit was accidentally only added for non-secure writes; the
secure banked version of the bit should also be writable.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-21-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:49 +01:00
Peter Maydell
9901c576f6 nvic: Implement Security Attribution Unit registers
Implement the register interface for the SAU: SAU_CTRL,
SAU_TYPE, SAU_RNR, SAU_RBAR and SAU_RLAR. None of the
actual behaviour is implemented here; registers just
read back as written.

When the CPU definition for Cortex-M33 is eventually
added, its initfn will set cpu->sau_sregion, in the same
way that we currently set cpu->pmsav7_dregion for the
M3 and M4.

Number of SAU regions is typically a configurable
CPU parameter, but this patch doesn't provide a
QEMU CPU property for it. We can easily add one when
we have a board that requires it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-14-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:49 +01:00
Peter Maydell
bed079da04 target/arm: Add new-in-v8M SFSR and SFAR
Add the new M profile Secure Fault Status Register
and Secure Fault Address Register.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-10-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:48 +01:00
Peter Maydell
de2db7ec89 target/arm: Prepare for CONTROL.SPSEL being nonzero in Handler mode
In the v7M architecture, there is an invariant that if the CPU is
in Handler mode then the CONTROL.SPSEL bit cannot be nonzero.
This in turn means that the current stack pointer is always
indicated by CONTROL.SPSEL, even though Handler mode always uses
the Main stack pointer.

In v8M, this invariant is removed, and CONTROL.SPSEL may now
be nonzero in Handler mode (though Handler mode still always
uses the Main stack pointer). In preparation for this change,
change how we handle this bit: rename switch_v7m_sp() to
the now more accurate write_v7m_control_spsel(), and make it
check both the handler mode state and the SPSEL bit.

Note that this implicitly changes the point at which we switch
active SP on exception exit from before we pop the exception
frame to after it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-4-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:47 +01:00
Peter Maydell
8ff26a3344 nvic: Clear the vector arrays and prigroup on reset
Reset for devices does not include an automatic clear of the
device state (unlike CPU state, where most of the state
structure is cleared to zero). Add some missing initialization
of NVIC state that meant that the device was left in the wrong
state if the guest did a warm reset.

(In particular, since we were resetting the computed state like
s->exception_prio but not all the state it was computed
from like s->vectors[x].active, the NVIC wound up in an
inconsistent state that could later trigger assertion failures.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1506092407-26985-2-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:47 +01:00
Peter Maydell
ab16152926 Migration pull 2017-09-27
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZy64HAAoJEAUWMx68W/3nTqwP/A5Gx4Qwkv5KKdpM0YLq//d+
 OODmzl7Ni3a5Up1ETqGdLb84estrgY+5DISp73Rkt4a5tbT7+XKrhb4qD+93NnTe
 zynY9in4C1jGxYm7YzeOhwSeIiuLZMTCLQlGdYw7/nunIFwkItUEvAFx3AG1WCJe
 2Mk0lvmg4LikruDDMdzqZaJu7h5RU5sQjA7SsyrTBdsN7tNWl3rKLYGXwgzv0uz5
 n2xkUgzvvnj1Bk/Adojkn05yxA86xKD/4rhFED9fjNVSjAGHMrHIWOJ70V26Cg5w
 3gJ+5mesWsH+erf0JFYv0S38SyFbmIOE39Nn13D/d0o1x89P8B8cgqbi3ADTKM77
 875wuIVnZzi2vIwVdxXQ9GHQ79cpXwr2fOfQ2rjT6Ll95K+u/MQG86fQiO0eJW+0
 KwQVCwwh+HmCUcCogMuxAc9+F8C8qolwCi/9QXwS2yLBElHKaWDIMyTce36cW9d7
 cZaKIOeSJUGNFoaWZnXN88MRuOYbdywTl+GddVAW3+VJCTYV2oi0o5fsTfxXy5AV
 y7uYo/pcSj2gSZJ5GairMlB6p5iXnE8yusi1e4ZKA1x1TaSHSb6zR59lRUFr+j/L
 JhUCfA85v5/elGqgkYp6UhSzFDJ2ID2oSEMQTIzfVrinOXtnf2KEh33YMbUH5qyo
 yHVEu12uPe9rE6A0vWlu
 =/+LV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170927a' into staging

Migration pull 2017-09-27

# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20170927a:
  migration: Route more error paths
  migration: Route errors up through vmstate_save
  migration: wire vmstate_save_state errors up to vmstate_subsection_save
  migration: Check field save returns
  migration: check pre_save return in vmstate_save_state
  migration: pre_save return int
  migration: disable auto-converge during bulk block migration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-27 22:44:51 +01:00
Dr. David Alan Gilbert
44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
Benjamin Herrenschmidt
58b6283586 ppc: Fix OpenPIC model
Apple uses an IBM MPIC2A without timers, it has 64 sources.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27 13:05:41 +10:00
Peter Maydell
460b6c8e58 * Speed up AddressSpaceDispatch creation (Alexey)
* Fix kvm.c assert (David)
 * Memory fixes and further speedup (me)
 * Persistent reservation manager infrastructure (me)
 * virtio-serial: add enable_backend callback (Pavel)
 * chardev GMainContext fixes (Peter)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlnFX3UUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMq2wf/Z7i67tTQYhaY7trAehdGDLSa6C4m
 0xAex+DVJrpfxFHLINkktx9NpvyZbQ/PuA0+5W10qmfPVF3hddTgLL3Dcg5xkQOh
 qNa2pFPMTn2T4eEdAANycNEF3nz8at5EnZ5anW2uMS41iDMq6aBjPhDgvi/iyG4w
 GBeZFjUUXQ8Wtp5fZJ1RgV/2PFg3W1REodvM143Ge84UUmnltf/snmx3NMQWw5wu
 coZFSIpcachMRxZ+bbLtJnCoRWG+8lkmTXYkswRWGez+WniscR0898RRpD0lJgIA
 cgeX5Cg/EbBIpwcqjsW2018WlsH5qp4rb6wVuqTY2kzbG+FUyKSqxSwGZw==
 =9GLQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Speed up AddressSpaceDispatch creation (Alexey)
* Fix kvm.c assert (David)
* Memory fixes and further speedup (me)
* Persistent reservation manager infrastructure (me)
* virtio-serial: add enable_backend callback (Pavel)
* chardev GMainContext fixes (Peter)

# gpg: Signature made Fri 22 Sep 2017 20:07:33 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (32 commits)
  chardev: remove context in chr_update_read_handler
  chardev: use per-dev context for io_add_watch_poll
  chardev: add Chardev.gcontext field
  chardev: new qemu_chr_be_update_read_handlers()
  scsi: add persistent reservation manager using qemu-pr-helper
  scsi: add multipath support to qemu-pr-helper
  scsi: build qemu-pr-helper
  scsi, file-posix: add support for persistent reservation management
  memory: Share special empty FlatView
  memory: seek FlatView sharing candidates among children subregions
  memory: trace FlatView creation and destruction
  memory: Create FlatView directly
  memory: Get rid of address_space_init_shareable
  memory: Rework "info mtree" to print flat views and dispatch trees
  memory: Do not allocate FlatView in address_space_init
  memory: Share FlatView's and dispatch trees between address spaces
  memory: Move address_space_update_ioeventfds
  memory: Alloc dispatch tree where topology is generared
  memory: Store physical root MR in FlatView
  memory: Rename mem_begin/mem_commit/mem_add helpers
  ...

# Conflicts:
#	configure
2017-09-23 12:55:40 +01:00
Alexey Kardashevskiy
166206845f memory: Switch memory from using AddressSpace to FlatView
FlatView's will be shared between AddressSpace's and subpage_t
and MemoryRegionSection cannot store AS anymore, hence this change.

In particular, for:

 typedef struct subpage_t {
     MemoryRegion iomem;
-    AddressSpace *as;
+    FlatView *fv;
     hwaddr base;
     uint16_t sub_section[];
 } subpage_t;

  struct MemoryRegionSection {
     MemoryRegion *mr;
-    AddressSpace *address_space;
+    FlatView *fv;
     hwaddr offset_within_region;
     Int128 size;
     hwaddr offset_within_address_space;
     bool readonly;
 };

This should cause no behavioural change.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-7-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21 23:19:37 +02:00
Peter Maydell
5cb18069d7 nvic: Support banked exceptions in acknowledge and complete
Update armv7m_nvic_acknowledge_irq() and armv7m_nvic_complete_irq()
to handle banked exceptions:
 * acknowledge needs to use the correct vector, which may be
   in sec_vectors[]
 * acknowledge needs to return to its caller whether the
   exception should be taken to secure or non-secure state
 * complete needs its caller to tell it whether the exception
   being completed is a secure one or not

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-20-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
437d59c17e nvic: Make SHCSR banked for v8M
Handle banking of SHCSR: some register bits are banked between
Secure and Non-Secure, and some are only accessible to Secure.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-19-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
3f1e0eb7c3 nvic: Make ICSR banked for v8M
The ICSR NVIC register is banked for v8M. This doesn't
require any new state, but it does mean that some bits
are controlled by BFHNFNMINS and some bits must work
with the correct banked exception. There is also a new
in v8M PENDNMICLR bit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-18-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
5d4791991d target/arm: Handle banking in negative-execution-priority check in cpu_mmu_index()
Now that we have a banked FAULTMASK register and banked exceptions,
we can implement the correct check in cpu_mmu_index() for whether
the MPU_CTRL.HFNMIENA bit's effect should apply. This bit causes
handlers which have requested a negative execution priority to run
with the MPU disabled. In v8M the test has to check this for the
current security state and so takes account of banking.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-17-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
49c80c380d nvic: Handle v8M changes in nvic_exec_prio()
Update nvic_exec_prio() to support the v8M changes:
 * BASEPRI, FAULTMASK and PRIMASK are all banked
 * AIRCR.PRIS can affect NS priorities
 * AIRCR.BFHFNMINS affects FAULTMASK behaviour

These changes mean that it's no longer possible to
definitely say that if FAULTMASK is set it overrides
PRIMASK, and if PRIMASK is set it overrides BASEPRI
(since if PRIMASK_NS is set and AIRCR.PRIS is set then
whether that 0x80 priority should take effect or the
priority in BASEPRI_S depends on the value of BASEPRI_S,
for instance). So we switch to the same approach used
by the pseudocode of working through BASEPRI, PRIMASK
and FAULTMASK and overriding the previous values if
needed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-16-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
7208b426c7 nvic: Disable the non-secure HardFault if AIRCR.BFHFNMINS is clear
If AIRCR.BFHFNMINS is clear, then although NonSecure HardFault
can still be pended via SHCSR.HARDFAULTPENDED it mustn't actually
preempt execution. The simple way to achieve this is to clear the
enable bit for it, since the enable bit isn't guest visible.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-15-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
331f4bae6c nvic: Implement v8M changes to fixed priority exceptions
In v7M, the fixed-priority exceptions are:
 Reset: -3
 NMI: -2
 HardFault: -1

In v8M, this changes because Secure HardFault may need
to be prioritised above NMI:
 Reset: -4
 Secure HardFault if AIRCR.BFHFNMINS == 1: -3
 NMI: -2
 Secure HardFault if AIRCR.BFHFNMINS == 0: -1
 NonSecure HardFault: -1

Make these changes, including support for changing the
priority of Secure HardFault as AIRCR.BFHFNMINS changes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-14-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
94a34abe32 nvic: In escalation to HardFault, support HF not being priority -1
When escalating to HardFault, we must go into Lockup if we
can't take the synchronous HardFault because the current
execution priority is already at or below the priority of
HardFault. In v7M HF is always priority -1 so a simple < 0
comparison sufficed; in v8M the priority of HardFault can
vary depending on whether it is a Secure or NonSecure
HardFault, so we must check against the priority of the
HardFault exception vector we're about to use.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-13-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
80ac239035 nvic: Compare group priority for escalation to HF
In armv7m_nvic_set_pending() we have to compare the
priority of an exception against the execution priority
to decide whether it needs to be escalated to HardFault.
In the specification this is a comparison against the
exception's group priority; for v7M we implemented it
as a comparison against the raw exception priority
because the two comparisons will always give the
same answer. For v8M the existence of AIRCR.PRIS and
the possibility of different PRIGROUP values for secure
and nonsecure exceptions means we need to explicitly
calculate the vector's group priority for this check.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-12-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
e6a0d3500d nvic: Make SHPR registers banked
Make the set_prio() function take a bool indicating
whether to pend the secure or non-secure version of a banked
interrupt, and use this to implement the correct banking
semantics for the SHPR registers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-11-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
2fb50a3340 nvic: Make set_pending and clear_pending take a secure parameter
Make the armv7m_nvic_set_pending() and armv7m_nvic_clear_pending()
functions take a bool indicating whether to pend the secure
or non-secure version of a banked interrupt, and update the
callsites accordingly.

In most callsites we can simply pass the correct security
state in; in a couple of cases we use TODO comments to indicate
that we will return the code in a subsequent commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-10-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
ff96c64aec nvic: Handle banked exceptions in nvic_recompute_state()
Update the nvic_recompute_state() code to handle the security
extension and its associated banked registers.

Code that uses the resulting cached state (ie the irq
acknowledge and complete code) will be updated in a later
commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-9-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell
e1be0a576b nvic: Implement NVIC_ITNS<n> registers
For v8M, the NVIC has a new set of registers per interrupt,
NVIC_ITNS<n>. These determine whether the interrupt targets Secure
or Non-secure state. Implement the register read/write code for
these, and make them cause NVIC_IABR, NVIC_ICER, NVIC_ISER,
NVIC_ICPR, NVIC_IPR and NVIC_ISPR to RAZ/WI for non-secure
accesses to fields corresponding to interrupts which are
configured to target secure state.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-8-git-send-email-peter.maydell@linaro.org
2017-09-21 16:29:27 +01:00
Peter Maydell
028b0da424 nvic: Make ICSR.RETTOBASE handle banked exceptions
Update the code in nvic_rettobase() so that it checks the
sec_vectors[] array as well as the vectors[] array if needed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-7-git-send-email-peter.maydell@linaro.org
2017-09-21 16:29:27 +01:00
Peter Maydell
3b2e934463 nvic: Implement AIRCR changes for v8M
The Application Interrupt and Reset Control Register has some changes
for v8M:
 * new bits SYSRESETREQS, BFHFNMINS and PRIS: these all have
   real state if the security extension is implemented and otherwise
   are constant
 * the PRIGROUP field is banked between security states
 * non-secure code can be blocked from using the SYSRESET bit
   to reset the system if SYSRESETREQS is set

Implement the new state and the changes to register read and write.
For the moment we ignore the effects of the secure PRIGROUP.
We will implement the effects of PRIS and BFHFNMIS later.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-6-git-send-email-peter.maydell@linaro.org
2017-09-21 16:29:27 +01:00
Peter Maydell
5255fcf8e4 nvic: Add cached vectpending_prio state
Instead of looking up the pending priority
in nvic_pending_prio(), cache it in a new state struct
field. The calculation of the pending priority given
the interrupt number is more complicated in v8M with
the security extension, so the caching will be worthwhile.

This changes nvic_pending_prio() from returning a full
(group + subpriority) priority value to returning a group
priority. This doesn't require changes to its callsites
because we use it only in comparisons of the form
  execution_prio > nvic_pending_prio()
and execution priority is always a group priority, so
a test (exec prio > full prio) is true if and only if
(execprio > group_prio).

(Architecturally the expected comparison is with the
group priority for this sort of "would we preempt" test;
we were only doing a test with a full priority as an
optimisation to avoid the mask, which is possible
precisely because the two comparisons always give the
same answer.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-5-git-send-email-peter.maydell@linaro.org
2017-09-21 16:29:27 +01:00
Peter Maydell
e93bc2ac11 nvic: Add cached vectpending_is_s_banked state
With banked exceptions, just the exception number in
s->vectpending is no longer sufficient to uniquely identify
the pending exception. Add a vectpending_is_s_banked bool
which is true if the exception is using the sec_vectors[]
array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1505240046-11454-4-git-send-email-peter.maydell@linaro.org
2017-09-21 16:29:23 +01:00
Peter Maydell
17906a162a nvic: Add banked exception states
For the v8M security extension, some exceptions must be banked
between security states. Add the new vecinfo array which holds
the state for the banked exceptions and migrate it if the
CPU the NVIC is attached to implements the security extension.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-21 16:28:59 +01:00
Peter Maydell
d535f5d363 ppc patch queue 2017-09-15
Here's the current batch of accumulated ppc patches.  These are all
 pretty simple bugfixes or cleanups, no big new features here.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAlm7TegACgkQbDjKyiDZ
 s5K7AhAAiGS7MOhaaA7a/TC4ekYbfxRKH7tE/FB+xvJg4NXp/f1/gj1ZuU4mAZcP
 LVKwTtoNzUjPUputlMafJrFvCAHdDwBzJ1CBSd3H9WCDFDRy/QZH7on7JJQKZwnQ
 Ls33PL5UMkhzsEW7XOb2HHni6VPYtw+Fr6fLLea/6xa+L5qPlsKMN7r8zhoqKnRj
 qkLSwgR64NqaQCTazhL5kty0JcyMivRHRIEqKaDLrs5zDeeP8yvMDr9ZfY+ri+DN
 LnC4u+2b4rSFaL7352i9TVUvFFXSNs45TruMLTAF5d8AwTrYe9yu1BD/Q/bTRszr
 aBAdOQApsPEbBk+TqnHQ+l231ihZpnbTmCc5EsNGYXSBm4P6ealIv3pkzYpAaU0m
 x9LdGbMwiqriGi/70sNpIkyzowNW0UCoKAXjxdNzYethczI08EGyvrjGfPsrU6n4
 w3HLFI+iGD5iFweW5sUbB2puybo32gAKs3j2NO4B1G6NI8NVgKnAFUkkkiM2e8Y8
 Xp8luUacL7x+PB9aAs+QpR2kqbbU1vvEOtQ2LkEQfQ5zJNdAtp3imdhKuFQT+cX+
 7FTvzpDzKThdtdTtizQ8JCoA2Z+LLZlR8wJ76oVe1CSyK0+xxvclipD5MPaSowqW
 UBV47+EuKOkCCNEBn3xxbx08bcTR1OqTaW+xIIdFm2Rdyt0SMDM=
 =GAd3
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.11-20170915' into staging

ppc patch queue 2017-09-15

Here's the current batch of accumulated ppc patches.  These are all
pretty simple bugfixes or cleanups, no big new features here.

# gpg: Signature made Fri 15 Sep 2017 04:50:00 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.11-20170915:
  ppc/kvm: use kvm_vm_check_extension() in kvmppc_is_pr()
  spapr_events: use QTAILQ_FOREACH_SAFE() in spapr_clear_pending_events()
  spapr_cpu_core: cleaning up qdev_get_machine() calls
  spapr_pci: don't create 64-bit MMIO window if we don't need to
  spapr_pci: convert sprintf() to g_strdup_printf()
  spapr_cpu_core: fail gracefully with non-pseries machine types
  xics: fix several error leaks
  vfio, spapr: Fix levels calculation
  spapr_pci: handle FDT creation errors with _FDT()
  spapr_pci: use the common _FDT() helper
  spapr: fix CAS-generated reset
  ppc/xive: fix OV5_XIVE_EXPLOIT bits
  spapr: only update SDR1 once per-cpu during CAS
  spapr_pci: use g_strdup_printf()
  spapr_pci: drop useless check in spapr_populate_pci_child_dt()
  spapr_pci: drop useless check in spapr_phb_vfio_get_loc_code()
  hw/ppc/spapr.c: cleaning up qdev_get_machine() calls
  net: Add SunGEM device emulation as found on Apple UniNorth

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-15 19:00:16 +01:00
Greg Kurz
a1a6bbde4f xics: fix several error leaks
If object_property_get_link() fails then it allocates an error, which
must be freed before returning. The error_get_pretty() function is
merely an accessor to the error message and doesn't free anything.

The error.h header indicates how to do it right:

 * Pass an existing error to the caller with the message modified:
 *     error_propagate(errp, err);
 *     error_prepend(errp, "Could not frobnicate '%s': ", name);

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-15 10:29:48 +10:00
Peter Maydell
22a9c26af6 nvic: Don't apply group priority mask to negative priorities
In several places we were unconditionally applying the
nvic_gprio_mask() to a priority value. This is incorrect
if the priority is one of the fixed negative priority
values (for NMI and HardFault), so don't do it.

This bug would have caused both NMI and HardFault to be
considered as the same priority and so NMI wouldn't
correctly preempt HardFault.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505137930-13255-5-git-send-email-peter.maydell@linaro.org
2017-09-14 18:43:17 +01:00
Peter Maydell
334e8dad7a target/arm: Make CFSR register banked for v8M
Make the CFSR register banked if v8M security extensions are enabled.

Not all the bits in this register are banked: the BFSR
bits [15:8] are shared between S and NS, and we store them
in the NS copy of the register.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-19-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:54 +01:00
Peter Maydell
c51a5cfc9f target/arm: Make MMFAR banked for v8M
Make the MMFAR register banked if v8M security extensions are
enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-18-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:54 +01:00
Peter Maydell
9d40cd8a68 target/arm: Make CCR register banked for v8M
Make the CCR register banked if v8M security extensions are enabled.

This is slightly more complicated than the other "add banking"
patches because there is one bit in the register which is not
banked. We keep the live data in the NS copy of the register,
and adjust it on register reads and writes. (Since we don't
currently implement the behaviour that the bit controls, there
is nowhere else that needs to care.)

This patch includes the enforcement of the bits which are newly
RES1 in ARMv8M.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1503414539-28762-17-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:54 +01:00
Peter Maydell
ecf5e8eae8 target/arm: Make MPU_CTRL register banked for v8M
Make the MPU_CTRL register banked if v8M security extensions are
enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-16-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell
1bc04a8880 target/arm: Make MPU_RNR register banked for v8M
Make the MPU_RNR register banked if v8M security extensions are
enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-15-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell
62c58ee0b2 target/arm: Make MPU_RBAR, MPU_RLAR banked for v8M
Make the MPU registers MPU_MAIR0 and MPU_MAIR1 banked if v8M security
extensions are enabled.

We can freely add more items to vmstate_m_security without
breaking migration compatibility, because no CPU currently
has the ARM_FEATURE_M_SECURITY bit enabled and so this
subsection is not yet used by anything.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-14-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell
4125e6feb7 target/arm: Make MPU_MAIR0, MPU_MAIR1 registers banked for v8M
Make the MPU registers MPU_MAIR0 and MPU_MAIR1 banked if v8M security
extensions are enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-13-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell
45db7ba681 target/arm: Make VTOR register banked for v8M
Make the VTOR register banked if v8M security extensions are enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-12-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell
f104919d15 nvic: Add NS alias SCS region
For v8M the range 0xe002e000..0xe002efff is an alias region which
for secure accesses behaves like a NonSecure access to the main
SCS region. (For nonsecure accesses including when the security
extension is not implemented, it is RAZ/WI.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1503414539-28762-11-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell
42a6686b2f target/arm: Make FAULTMASK register banked for v8M
Make the FAULTMASK register banked if v8M security extensions are enabled.

Note that we do not yet implement the functionality of the new
AIRCR.PRIS bit (which allows the effect of the NS copy of FAULTMASK to
be restricted).

This patch includes the code to determine for v8M which copy
of FAULTMASK should be updated on exception exit; further
changes will be required to the exception exit code in general
to support v8M, so this is just a small piece of that.

The v8M ARM ARM introduces a notation where individual paragraphs
are labelled with R (for rule) or I (for information) followed
by a random group of subscript letters. In comments where we want
to refer to a particular part of the manual we use this convention,
which should be more stable across document revisions than using
section or page numbers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-9-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:52 +01:00
Peter Maydell
6d80483419 target/arm: Make PRIMASK register banked for v8M
Make the PRIMASK register banked if v8M security extensions are enabled.

Note that we do not yet implement the functionality of the new
AIRCR.PRIS bit (which allows the effect of the NS copy of PRIMASK to
be restricted).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-8-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:52 +01:00
Peter Maydell
acf949411f target/arm: Make BASEPRI register banked for v8M
Make the BASEPRI register banked if v8M security extensions are enabled.

Note that we do not yet implement the functionality of the new
AIRCR.PRIS bit (which allows the effect of the NS copy of BASEPRI to
be restricted).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-7-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:52 +01:00