Commit a47842d ("riscv: Add support for the Zfa extension") implemented the zfa extension.
However, it has some typos for fleq.d and fltq.d. Both of them misused the fltq.s
helper function.
Fixes: a47842d ("riscv: Add support for the Zfa extension")
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230728003906.768-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RVA23 Profiles states:
The RVA23 profiles are intended to be used for 64-bit application
processors that will run rich OS stacks from standard binary OS
distributions and with a substantial number of third-party binary user
applications that will be supported over a considerable length of time
in the field.
The chapter 4 of the unprivileged spec introduces the Zihintntl extension
and Zihintntl is a mandatory extension presented in RVA23 Profiles, whose
purpose is to enable application and operating system portability across
different implementations. Thus the DTS should contain the Zihintntl ISA
string in order to pass to software.
The unprivileged spec states:
Like any HINTs, these instructions may be freely ignored. Hence, although
they are described in terms of cache-based memory hierarchies, they do not
mandate the provision of caches.
These instructions are encoded with non-used opcode, e.g. ADD x0, x0, x2,
which QEMU already supports, and QEMU does not emulate cache. Therefore
these instructions can be considered as a no-op, and we only need to add
a new property for the Zihintntl extension.
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20230726074049.19505-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These are WARL fields - zero out the bits for unavailable counters and
special case the TM bit in mcountinhibit which is hardwired to zero.
This patch achieves this by modifying the value written so that any use
of the field will see the correctly masked bits.
Tested by modifying OpenSBI to write max value to these CSRs and upon
subsequent read the appropriate number of bits for number of PMUs is
enabled and the TM bit is zero in mcountinhibit.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20230802124906.24197-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksed vector-crypto extension, which
consists of the following instructions:
* vsm4k.vi
* vsm4r.[vv,vs]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
[lawrence.hunter@codethink.co.uk: Moved SM4 functions from
crypto_helper.c to vcrypto_helper.c]
[nazar.kazakov@codethink.co.uk: Added alignment checks, refactored code to
use macros, and minor style changes]
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-16-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Adds sm4_ck constant for use in sm4 cryptography across different targets.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-15-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Allows sharing of sm4_subword between different targets.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-14-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkg vector-crypto extension, which
consists of the following instructions:
* vgmul.vv
* vghsh.vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvkg property]
[max.chou@sifive.com: Replaced uint by int for cross win32 build]
Message-ID: <20230711165917.2629866-13-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksh vector-crypto extension, which
consists of the following instructions:
* vsm3me.vv
* vsm3c.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvksh property]
Message-ID: <20230711165917.2629866-12-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvknh vector-crypto extension, which
consists of the following instructions:
* vsha2ms.vv
* vsha2c[hl].vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvknha & x-zvknhb properties]
[max.chou@sifive.com: Replaced SEW selection to happened during
translation]
Message-ID: <20230711165917.2629866-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkned vector-crypto extension, which
consists of the following instructions:
* vaesef.[vv,vs]
* vaesdf.[vv,vs]
* vaesdm.[vv,vs]
* vaesz.vs
* vaesem.[vv,vs]
* vaeskf1.vi
* vaeskf2.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Imported aes-round.h and exposed x-zvkned
property]
[max.chou@sifive.com: Fixed endian issues and replaced the vstart & vl
egs checking by helper function]
[max.chou@sifive.com: Replaced bswap32 calls in aes key expanding]
Message-ID: <20230711165917.2629866-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbb vector-crypto extension, which
consists of the following instructions:
* vrol.[vv,vx]
* vror.[vv,vx,vi]
* vbrev8.v
* vrev8.v
* vandn.[vv,vx]
* vbrev.v
* vclz.v
* vctz.v
* vcpop.v
* vwsll.[vv,vx,vi]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Fix imm mode of vror.vi]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvbb property]
Message-ID: <20230711165917.2629866-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move some macros out of `vector_helper` and into `vector_internals`.
This ensures they can be used by both vector and vector-crypto helpers
(latter implemented in proceeding commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-8-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zvbb (implemented in later commit) has a widening instruction, which
requires an extra check on the enabled extensions. Refactor
GEN_OPIVX_WIDEN_TRANS() to take a check function to avoid reimplementing
it.
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the checks out of `do_opiv{v,x,i}_gvec{,_shift}` functions
and into the corresponding macros. This enables the functions to be
reused in proceeding commits without check duplication.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-6-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbc vector-crypto extension, which
consists of the following instructions:
* vclmulh.[vx,vv]
* vclmul.[vx,vv]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
[max.chou@sifive.com: Exposed x-zvbc property]
Message-ID: <20230711165917.2629866-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the redundant "vl == 0" check which is already included within the vstart >= vl check, when vl == 0.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Refactor the non SEW-specific stuff out of `GEN_OPIVV_TRANS` into
function `opivv_trans` (similar to `opivi_trans`). `opivv_trans` will be
used in proceeding vector-crypto commits.
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Take some functions/macros out of `vector_helper` and put them in a new
module called `vector_internals`. This ensures they can be used by both
vector and vector-crypto helpers (latter implemented in proceeding
commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AES MixColumns and InvMixColumns operations are relatively
expensive 4x4 matrix multiplications in GF(2^8), which is why C
implementations usually rely on precomputed lookup tables rather than
performing the calculations on demand.
Given that we already carry those tables in QEMU, we can just grab the
right value in the implementation of the RISC-V AES32 instructions. Note
that the tables in question are permuted according to the respective
Sbox, so we can omit the Sbox lookup as well in this case.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Zewen Ye <lustrew@foxmail.com>
Cc: Weiwei Li <liweiwei@iscas.ac.cn>
Cc: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230731084043.1791984-1-ardb@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bef6f008b98(accel/tcg: Return bool from page_check_range) converts
integer return value to bool type. However, it wrongly converted the use
of the API in riscv fault-only-first, where page_check_range < = 0, should
be converted to !page_check_range.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230729031618.821-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The cpu->cfg.epmp extension is still experimental, but it already has a
'smepmp' riscv,isa string. Add it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zmmul was promoted from experimental to ratified in commit 6d00ffad4e.
Add a riscv,isa string for it.
Fixes: 6d00ffad4e ("target/riscv: move zmmul out of the experimental properties")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Values that have been read via cpu_physical_memory_read() from the
guest's memory have to be swapped in case the host endianess differs
from the guest.
Fixes: a6e13e31d5 ("riscv_htif: Support console output via proxy syscall")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230721094720.902454-3-thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The character that should be printed is stored in the 64 bit "payload"
variable. The code currently tries to print it by taking the address
of the variable and passing this pointer to qemu_chr_fe_write(). However,
this only works on little endian hosts where the least significant bits
are stored on the lowest address. To do this in a portable way, we have
to store the value in an uint8_t variable instead.
Fixes: 5033606780 ("RISC-V HTIF Console")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230721094720.902454-2-thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'host' CPU is available in a CONFIG_KVM build and it's currently
available for all accels, but is a KVM only CPU. This means that in a
RISC-V KVM capable host we can do things like this:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: H extension requires priv spec 1.12.0
This CPU does not have a priv spec because we don't filter its extensions
via priv spec. We shouldn't be reaching riscv_cpu_realize_tcg() at all
with the 'host' CPU.
We don't have a way to filter the 'host' CPU out of the available CPU
options (-cpu help) if the build includes both KVM and TCG. What we can
do is to error out during riscv_cpu_realize_tcg() if the user chooses
the 'host' CPU with accel=tcg:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: 'host' CPU is not compatible with TCG acceleration
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230721133411.474105-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that we have Eager Page Split support added for ARM in the kernel,
enable it in Qemu. This adds,
-eager-split-size to -accel sub-options to set the eager page split chunk size.
-enable KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE.
The chunk size specifies how many pages to break at a time, using a
single allocation. Bigger the chunk size, more pages need to be
allocated ahead of time.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-id: 20230905091246.1931-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The linux kernel detects and enables this bit. Once trapped,
EC_SYSTEMREGISTERTRAP is treated like EC_UNCATEGORIZED, so
no changes required within linux-user/aarch64/cpu_loop.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the check for EL2 enabled in the security space and the
TIDCP bit in an out-of-line helper.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cortex-a710 is a first generation ARMv9.0-A processor.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a stub implementation, as a write is a "request".
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Due to recent KVM changes, QEMU is setting a ptimer offset resulting
in unintended trap and emulate access and a consequent performance
hit. Filter out the PTIMER_CNT register to restore trapless ptimer
access.
Quoting Andrew Jones:
Simply reading the CNT register and writing back the same value is
enough to set an offset, since the timer will have certainly moved
past whatever value was read by the time it's written. QEMU
frequently saves and restores all registers in the get-reg-list array,
unless they've been explicitly filtered out (with Linux commit
680232a94c12, KVM_REG_ARM_PTIMER_CNT is now in the array). So, to
restore trapless ptimer accesses, we need a QEMU patch to filter out
the register.
See
https://lore.kernel.org/kvmarm/gsntttsonus5.fsf@coltonlewis-kvm.c.googlers.com/T/#m0770023762a821db2a3f0dd0a7dc6aa54e0d0da9
for additional context.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Colton Lewis <coltonlewis@google.com>
Message-id: 20230831190052.129045-1-coltonlewis@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
STGP writes to tag memory, it does not check it.
This happened to work because we wrote tag memory first
so that the check always succeeded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230901203103.136408-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the Configuration Frame controller (CFRAME_REG) and the
Configuration Frame broadcast controller (CFRAME_BCAST_REG) to the
Versal machine.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-9-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the Configuration Frame Unit (CFU_APB, CFU_FDRO and CFU_SFR) to
the Versal machine.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-8-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame broadcast
controller (CFRAME_BCAST_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-7-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame controller
(CFRAME_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20230831165701.2016397-6-francisco.iglesias@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's Single
Frame Read port (CFU_SFR).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-5-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's data out
port (CFU_FDRO).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-4-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of the software programming interface (CFU_APB) of
Xilinx Versal's Configuration Frame Unit.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-3-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the Xilinx Configuration Frame Interface (CFI) for transmitting
CFI data packets between the Xilinx Configuration Frame Unit models
(CFU_APB, CFU_FDRO and CFU_SFR), the Xilinx CFRAME controller (CFRAME_REG)
and the Xilinx CFRAME broadcast controller (CFRAME_BCAST_REG) models (when
emulating bitstream programming and readback).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20230831165701.2016397-2-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix when using GCC v11.4 (Ubuntu 11.4.0-1ubuntu1~22.04) with CFLAGS=-Og:
[4/6] Compiling C object libcommon.fa.p/hw_intc_arm_gicv3_its.c.o
FAILED: libcommon.fa.p/hw_intc_arm_gicv3_its.c.o
inlined from ‘lookup_vte’ at hw/intc/arm_gicv3_its.c:453:9,
inlined from ‘vmovp_callback’ at hw/intc/arm_gicv3_its.c:1039:14:
hw/intc/arm_gicv3_its.c:347:9: error: ‘vte.rdbase’ may be used uninitialized [-Werror=maybe-uninitialized]
347 | trace_gicv3_its_vte_read(vpeid, vte->valid, vte->vptsize,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
348 | vte->vptaddr, vte->rdbase);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/intc/arm_gicv3_its.c: In function ‘vmovp_callback’:
hw/intc/arm_gicv3_its.c:1036:13: note: ‘vte’ declared here
1036 | VTEntry vte;
| ^~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230831131348.69032-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio_load() as a whole should run in coroutine context because it
reads from the migration stream and we don't want this to block.
However, it calls virtio_set_features_nocheck() and devices don't
expect their .set_features callback to run in a coroutine and therefore
call functions that may not be called in coroutine context. To fix this,
drop out of coroutine context for calling virtio_set_features_nocheck().
Without this fix, the following crash was reported:
#0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
#1 0x00007efc738c05d3 in __pthread_kill_internal (signo=6, threadid=<optimized out>) at pthread_kill.c:78
#2 0x00007efc73873d26 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
#3 0x00007efc738477f3 in __GI_abort () at abort.c:79
#4 0x00007efc7384771b in __assert_fail_base (fmt=0x7efc739dbcb8 "", assertion=assertion@entry=0x560aebfbf5cf "!qemu_in_coroutine()",
file=file@entry=0x560aebfcd2d4 "../block/graph-lock.c", line=line@entry=275, function=function@entry=0x560aebfcd34d "void bdrv_graph_rdlock_main_loop(void)") at assert.c:92
#5 0x00007efc7386ccc6 in __assert_fail (assertion=0x560aebfbf5cf "!qemu_in_coroutine()", file=0x560aebfcd2d4 "../block/graph-lock.c", line=275,
function=0x560aebfcd34d "void bdrv_graph_rdlock_main_loop(void)") at assert.c:101
#6 0x0000560aebcd8dd6 in bdrv_register_buf ()
#7 0x0000560aeb97ed97 in ram_block_added.llvm ()
#8 0x0000560aebb8303f in ram_block_add.llvm ()
#9 0x0000560aebb834fa in qemu_ram_alloc_internal.llvm ()
#10 0x0000560aebb2ac98 in vfio_region_mmap ()
#11 0x0000560aebb3ea0f in vfio_bars_register ()
#12 0x0000560aebb3c628 in vfio_realize ()
#13 0x0000560aeb90f0c2 in pci_qdev_realize ()
#14 0x0000560aebc40305 in device_set_realized ()
#15 0x0000560aebc48e07 in property_set_bool.llvm ()
#16 0x0000560aebc46582 in object_property_set ()
#17 0x0000560aebc4cd58 in object_property_set_qobject ()
#18 0x0000560aebc46ba7 in object_property_set_bool ()
#19 0x0000560aeb98b3ca in qdev_device_add_from_qdict ()
#20 0x0000560aebb1fbaf in virtio_net_set_features ()
#21 0x0000560aebb46b51 in virtio_set_features_nocheck ()
#22 0x0000560aebb47107 in virtio_load ()
#23 0x0000560aeb9ae7ce in vmstate_load_state ()
#24 0x0000560aeb9d2ee9 in qemu_loadvm_state_main ()
#25 0x0000560aeb9d45e1 in qemu_loadvm_state ()
#26 0x0000560aeb9bc32c in process_incoming_migration_co.llvm ()
#27 0x0000560aebeace56 in coroutine_trampoline.llvm ()
Cc: qemu-stable@nongnu.org
Buglink: https://issues.redhat.com/browse/RHEL-832
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230905145002.46391-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Migration code can run both in coroutine context (the usual case) and
non-coroutine context (at least savevm/loadvm for snapshots). This also
affects the VMState callbacks, and devices must consider this. Change
the callback definition in VMStateInfo to be explicit about it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230905145002.46391-2-kwolf@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most block driver implementations don't have any reason for their
BlockDriver to be public. The only exceptions are bdrv_file, bdrv_raw
and bdrv_qcow2, which are actually used in other source files.
Make all other BlockDriver definitions static if they aren't yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230905130607.35134-3-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When commit 5e5733e599 created block/meson.build, the list of
unconditionally added files was in alphabetical order. Later commits
added new files in random places. Reorder the list to be alphabetical
again. (As for ordering foo.c against foo-*.c, there are both ways used
currently; standardise on having foo.c first, even though this is
different from the original commit 5e5733e5999.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230905130607.35134-2-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The commit 5d8813593f ("block/qapi: Let bdrv_query_image_info()
recurse") removed the loop where we set the 'bs0' variable, so now it
is just the same as 'bs'.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230901184605.32260-3-farosas@suse.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The last call site of this function has been removed by commit
c04d0ab026 ("qemu-img: Let info print block graph").
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20230901184605.32260-2-farosas@suse.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_open_child() may return NULL.
Usually return value is checked for this function.
Check for return value is more reliable.
Fixes: 24bc15d1f6 ("vmdk: Use BdrvChild instead of BDS for references to extents")
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Message-ID: <20230831125926.796205-1-frolov@swemel.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Document the 'compression_type' option for qcow2, and mention that
streamOptimized vmdk supports compression, too.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230901102430.23856-1-kwolf@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
