Don't expect read(2) can always read as many as it's told.
CC: Richard Henderson <richard.henderson@linaro.org>
CC: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to avoid migration issues, we enable PVH only for
machine type >= 4.0
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use pvh.bin option rom when we are booting an uncompressed
kernel using the x86/HVM direct boot ABI.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When initrd is specified, load and expose it to the guest firmware
through fw_cfg. The firmware will fill the hvm_start_info for the
kernel.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Based-on: <1545422632-24444-5-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These changes (along with corresponding Linux kernel and qboot changes)
enable a guest to be booted using the x86/HVM direct boot ABI.
This commit adds a load_elfboot() routine to pass the size and
location of the kernel entry point to qboot (which will fill in
the start_info struct information needed to to boot the guest).
Having loaded the ELF binary, load_linux() will run qboot
which continues the boot.
The address for the kernel entry point is read from an ELF Note
in the uncompressed kernel binary by a helper routine passed
to load_elf().
Co-developed-by: George Kennedy <George.Kennedy@oracle.com>
Signed-off-by: George Kennedy <George.Kennedy@oracle.com>
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds an optional function pointer, 'elf_note_fn', to
load_elf() which causes load_elf() to additionally parse any
ELF program headers of type PT_NOTE and check to see if the ELF
Note is of the type specified by the 'translate_opaque' arg.
If a matching ELF Note is found then the specfied function pointer
is called to process the ELF note.
Passing a NULL function pointer results in ELF Notes being skipped.
The first consumer of this functionality is the PVHboot support
which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while
loading the uncompressed kernel binary in order to discover the
boot entry address for the x86/HVM direct boot ABI.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- fix CPU wakeup on runstall changes; expose runstall as an IRQ line;
- place mini-bootloader at the BSP reset vector;
- expose CPU core frequency in XTFPGA board FPGA register;
- rearrange access to external interrupts of xtensa cores;
- add MX interrupt distributor and use it on SMP XTFPGA boards;
- add test_mmuhifi_c3 xtensa core variant;
- raise number of CPUs that can be instantiated on XTFPGA boards.
-----BEGIN PGP SIGNATURE-----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=8D60
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20190204-xtensa' into staging
target/xtensa: SMP updates and various fixes
- fix CPU wakeup on runstall changes; expose runstall as an IRQ line;
- place mini-bootloader at the BSP reset vector;
- expose CPU core frequency in XTFPGA board FPGA register;
- rearrange access to external interrupts of xtensa cores;
- add MX interrupt distributor and use it on SMP XTFPGA boards;
- add test_mmuhifi_c3 xtensa core variant;
- raise number of CPUs that can be instantiated on XTFPGA boards.
# gpg: Signature made Mon 04 Feb 2019 18:59:32 GMT
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/20190204-xtensa:
hw/xtensa: xtfpga: raise CPU number limit
target/xtensa: add test_mmuhifi_c3 core
hw/xtensa: xtfpga: use MX PIC for SMP
target/xtensa: add MX interrupt controller
target/xtensa: expose core runstall as an IRQ line
target/xtensa: rearrange access to external interrupts
target/xtensa: drop function xtensa_timer_irq
target/xtensa: fix access to the INTERRUPT SR
hw/xtensa: xtfpga: use core frequency
hw/xtensa: xtfpga: fix bootloader placement in SMP
target/xtensa: add qemu_cpu_kick to xtensa_runstall
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When resetting the guest we should unplug and remove all devices that
are still pending.
With this patch, the requested device will be unplugged on reboot
(S390_RESET_EXTERNAL and S390_RESET_REIPL, which reset the pcihost bridge
via qemu_devices_reset()).
This approach is similar to what's done for acpi PCI hotplug in
acpi_pcihp_reset() -> acpi_pcihp_update() ->
acpi_pcihp_update_hotplug_bus() -> acpi_pcihp_eject_slot().
s390_pci_generate_plug_event()'s will still be generated, I guess this
is not an issue. The same thing would happen right now when unplugging
a device just before starting the guest.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190130155733.32742-7-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We decided to always create the PCI host bridge, even if 'zpci' is not
enabled (due to migration compatibility). This however right now allows
to add zPCI/PCI devices to a VM although the guest will never actually see
them, confusing people that are using a simple CPU model that has no
'zpci' enabled - "Why isn't this working" (David Hildenbrand)
Let's check for 'zpci' and at least print a warning that this will not
work as expected. We could also bail out, however that might break
existing QEMU commandlines.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190130155733.32742-4-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When hotplugging a PCI bridge right now to the root port, we resolve
pci_get_bus(pdev)->parent_dev, which results in a SEGFAULT. Hotplugging
really only works right now when hotplugging to another bridge.
Instead, we have to properly check if we are already at the root.
Let's cleanup the code while at it a bit and factor out updating the
subordinate bus number into a separate function. The check for
"old_nr < nr" is right now not strictly necessary, but makes it more
obvious what is actually going on.
Most probably fixing up the topology is not our responsibility when
hotplugging. The guest has to sort this out. But let's keep it for now
and only fix current code to not crash.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190130155733.32742-3-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The primary bus number corresponds always to the bus number of the
bus the bridge is attached to.
Right now, if we have two bridges attached to the same bus (e.g. root
bus) this is however not the case. The first bridge will have primary
bus 0, the second bridge primary bus 1, which is wrong. Fix the assignment.
While at it, drop setting the PCI_SUBORDINATE_BUS temporarily to 0xff.
Setting it temporarily to that value (as discussed e.g. in [1]), is
only relevant for a running system that probes the buses. The value is
effectively unused for us just doing a DFS.
Also add a comment why we have to reassign during every reset (which I
found to be surprising.
Please note that hotplugging of bridges is in general still broken, will
be fixed next.
[1] http://www.science.unitn.it/~fiorella/guidelinux/tlk/node76.html
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190130155733.32742-2-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We currently don't migrate any state for zpci devices, which are
coupled with standard pci devices. This means funny things happen
when we e.g. try to migrate with a virtio-pci device but the s390x-
specific zpci state is not migrated (vfio-pci is not affected, as
it is not migratable anyway.)
Until this is fixed, mark zpci devices as unmigratable.
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's handle it similar to x86 ACPI PCI code and don't use a timer.
Instead, remember if an unplug request is pending and keep it pending
for eternity. (a follow up patch will process the request on
reboot).
We expect that a guest that is up and running, will process the unplug
request and trigger the unplug. This is normal operation, no timer needed.
If the guest does not react, this usually means something in the guest
is going wrong. Simply removing the device after 30 seconds does not
really sound like a good idea. It might sometimes be wanted, but I
consider this rather an "opt-in" decision as it might harm a guest not
prepared for it.
If we ever actually want a "forced/surprise removal", we will have to
implement something on top of the existing "device_del" framework. E.g.
also x86 might want to do a forced/surprise removal of PCI devices under
some conditions. "device_del X, forced=true" could be an option and will
require changes to the hotplug handler infrastructure.
This will then move the responsibility on when to do a forced removal
to a higher level. Doing a forced removal right now over-complicates
things and doesn't really seem to be required.
Let's allow to send multiple requests.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190130155733.32742-6-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
PCI on s390x is really weird and how it was modeled in QEMU might not have
been the right choice. Anyhow, right now it is the case that:
- Hotplugging a PCI device will silently create a zPCI device
(if none is provided)
- Hotunplugging a zPCI device will unplug the PCI device (if any)
- Hotunplugging a PCI device will unplug also the zPCI device
As far as I can see, we can no longer change this behavior. But we
should fix it.
Both device types are handled via a single hotplug handler call. This
is problematic for various reasons:
1. Unplugging via the zPCI device allows to unplug devices that are not
hot removable. (check performed in qdev_unplug()) - bad.
2. Hotplug handler chains are not possible for the unplug case. In the
future, the machine might want to override hotplug handlers, to
process device specific stuff and to then branch off to the actual
hotplug handler. We need separate hotplug handler calls for both the
PCI and zPCI device to make this work reliably. All other PCI
implementations are already prepared to handle this correctly, only
s390x is missing.
Therefore, introduce the unplug_request handler and properly perform
unplug checks by redirecting to the separate unplug_request handlers.
When finally unplugging, perform two separate hotplug_handler_unplug()
calls, first for the PCI device, followed by the zPCI device. This now
nicely splits unplugging paths for both devices.
The redirect part is a little hairy, as the user is allowed to trigger
unplug either via the PCI or the zPCI device. So redirect always to the
PCI unplug request handler first and remember if that check has been
performed in the zPCI device. Redirect then to the zPCI device unplug
request handler to perform the magic. Remembering that we already
checked the PCI device breaks the redirect loop.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190130155733.32742-5-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some frontend drivers will handle dynamic resizing of PV disks, so set up
the BlockDevOps resize_cb() method during xen_block_realize() to allow
this to be done.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
There is a flaw in the xen-bus state model. To allow a frontend to re-
connect the backend state of an online XenDevice is transitioned from
Closed to InitWait, but this is currently done unilaterally which is
incorrect. The backend state should remain Closed until the frontend state
transitions to Initialising.
This patch removes the automatic backend state transition from
xen_device_backend_state_changed() and, instead, adds an extra check in
xen_device_frontend_state_changed() to determine whether a frontend is
trying to re-connect to a previously Closed XenDevice. Only if this is
found to be the case is the backend state transitioned from Closed to
InitWait. Note that this transition will be common amongst all XenDevice
classes and hence xen_device_frontend_state_changed() returns immediately
afterwards without calling into the XenDeviceClass frontend_changed()
method.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
These files don't use anything from m48t59.h, so no need to include
this header here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
reg->phys_hi and assigned->phys_hi are big endian but we do an extra
byteswap anyway when copying reg->phys_hi to assigned->phys_hi.
To make things slightly more messy, we also add a relocatable bit (b_n())
although in the right endianness.
This fixes endianness of assigned->phys_hi.
This is unlikely to produce any visible difference though as we should end up
there only in the case of PCI hotplug and even then I am not sure if
(d->io_regions[i].addr == PCI_BAR_UNMAPPED) == true.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cirrus VGA card has been enabled in the PPC builds with
commit 29f9cef39e ("ppc: Include vga cirrus card into
the compiling process") last year. It also works on the pseries
machine, even SLOF contains support for this card, so we can
also support this for the "-vga" parameter here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_load_rtas() handles now RTAS address and size information in the FDT
so drop them from spapr_build_fdt().
While we are here, fix a small typo.
Fixes: 3f5dabceba "pseries: Consolidate construction of /rtas device tree node"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, it is not possible to build a QEMU binary without the
ppc405_uc.c file, even if you do not want to have the embedded machines
in the binary. This is bad since it's quite a bit of code and this code
pulls in some more dependencies (e.g. via the usage of serial_mm_init())
which would not be needed otherwise - especially with the upcoming
Kconfig-style configuration system for QEMU.
The only functions from this file which are really always required for
linking are the ppc40x_*reset() functions, so move these functions to
ppc.c, close to the ppc40x_set_irq() function that calls them. Now we
can flag ppc405_uc.c and ppc4xx_devs.c with the CONFIG_PPC4XX config
switch, too.
And while we're at it, replace the printf()s in these ppc40x_*reset()
functions with proper calls to qemu_log_mask().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Next step is to remove them from under the PowerPCCPU
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Include the interrupt presenter under the machine_data as we plan to
remove it from under PowerPCCPU
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It provides a mean to retrieve the XiveTCTX of a CPU. This will become
necessary with future changes which move the interrupt presenter
object pointers under the PowerPCCPU machine_data.
The PowerNV machine has an extra requirement on TIMA accesses that
this new method addresses. The machine can perform indirect loads and
stores on the TIMA on behalf of another CPU. The PIR being defined in
the controller registers, we need a way to peek in the controller
model to find the PIR value.
The XiveTCTX is moved above the XiveRouter definition to avoid forward
typedef declarations.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
While looking at the s390x implementation, looks like spapr has a
similar BUG when building the topology.
The primary bus number corresponds always to the bus number of the
bus the bridge is attached to.
Right now, if we have two bridges attached to the same bus (e.g. root
bus) this is however not the case. The first bridge will have primary
bus 0, the second bridge primary bus 1, which is wrong. Fix the assignment.
While at it, drop setting the PCI_SUBORDINATE_BUS temporarily to 0xff.
Setting it temporarily to that value (as discussed e.g. in [1]), is
only relevant for a running system that probes the buses. The value is
effectively unused for us just doing a DFS.
[1] http://www.science.unitn.it/~fiorella/guidelinux/tlk/node76.html
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Machine types 3.0 and older only know about the legacy XICS backend.
Make it clear by erroring out if the user tries to set ic-mode on
such machines.
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In hw/scsi/spapr_vio.c we declare that the controller supports multiple
buses by specifying "max_channel = 7" there. So in the code that fixes
up the device tree nodes, we must encode the channel number (a.k.a. bus
number in the "Logical unit addressing format" table of SAM5) into the
64-bit LUN, too.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1663160
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit efe2add7cb ("spapr/vio: deprecate the "irq" property") was
merged in QEMU version 3.0. The "irq" property" can be removed for
QEMU version 4.0.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When reading base register of RAM slot with no RAM we should not try
to calculate register value because that will result printing an error
due to invalid RAM size. Just return 0 without the error in this case.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix the encoding of larger memory modules in the SoC registers which
allows specifying more than 1GB memory for sam460ex. Well, only 2GB
due to SoC and firmware restrictions which was the only missing value
compared to what the real hardware supports. The SoC should support up
to 4GB but when setting that the firmware hangs during memory test.
This may be an overflow bug in the firmware which I did not try to
debug but this may affect real hardware as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sdram_set_bcr() function in ppc440_uc.c takes a pointer into an
array then calculates its index from that. It's simpler and easier to
just pass the index which simplifies both the function and its callers.
Do similar cleanup in ppc4xx_devs.c to similar function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There's already a struct with the same name in ppc4xx_devs.c. They are
not used outside their files so don't clash but they are also not
identical so rename the ppc440 specific one to distinguish them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To avoid overflow if larger values are added later use ram_addr_t for
the sdram_bank_sizes parameter to match ram_size to which it is compared.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Get rid of code from MIPS Malta board used to create SPD EEPROM data
(parts of which was not even needed for sam460ex) and use the generic
spd_data_generate() function to simplify this.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are several boards with SPD EEPROMs that are now using
duplicated or slightly different hard coded data. Add a helper to
generate SPD data for a memory module of given type and size that
could be used by these boards (either as is or with further changes if
needed) which should help cleaning this up and avoid further duplication.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The virtqueue_pop() and virtqueue_get_avail_bytes() routines can use the
INDIRECT table to get the data. It is possible to create a packet which
will lead to the assert message like:
include/exec/memory.h:1995: void
address_space_read_cached(MemoryRegionCache *, hwaddr, void *, int):
Assertion `addr < cache->len && len <= cache->len - addr' failed.
Aborted
To do it the first descriptor should have a link to the INDIRECT table
and set the size of it to 0. It doesn't look good that the guest should
be able to trigger the assert in qemu. Add additional check for the size
of the INDIRECT table, which should not be 0.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
- vmdk: Support for blockdev-create
- block: Apply auto-read-only for ro-whitelist drivers
- virtio-scsi: Fixes related to attaching/detaching iothreads
- scsi-disk: Fixed erroneously detected multipath setup with multiple
disks created with node-names. Added device_id property.
- block: Fix hangs in synchronous APIs with iothreads
- block: Fix invalidate_cache error path for parent activation
- block-backend, mirror, qcow2, vpc, vdi, qemu-iotests:
Minor fixes and code improvements
-----BEGIN PGP SIGNATURE-----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=oaAn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- vmdk: Support for blockdev-create
- block: Apply auto-read-only for ro-whitelist drivers
- virtio-scsi: Fixes related to attaching/detaching iothreads
- scsi-disk: Fixed erroneously detected multipath setup with multiple
disks created with node-names. Added device_id property.
- block: Fix hangs in synchronous APIs with iothreads
- block: Fix invalidate_cache error path for parent activation
- block-backend, mirror, qcow2, vpc, vdi, qemu-iotests:
Minor fixes and code improvements
# gpg: Signature made Fri 01 Feb 2019 15:23:10 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (27 commits)
scsi-disk: Add device_id property
scsi-disk: Don't use empty string as device id
qtest.py: Wait for the result of qtest commands
block: Fix invalidate_cache error path for parent activation
iotests/236: fix transaction kwarg order
iotests: Filter second BLOCK_JOB_ERROR from 229
virtio-scsi: Forbid devices with different iothreads sharing a blockdev
scsi-disk: Acquire the AioContext in scsi_*_realize()
virtio-scsi: Move BlockBackend back to the main AioContext on unplug
block: Eliminate the S_1KiB, S_2KiB, ... macros
block: Remove blk_attach_dev_legacy() / legacy_dev code
block: Apply auto-read-only for ro-whitelist drivers
uuid: Make qemu_uuid_bswap() take and return a QemuUUID
block/vdi: Don't take address of fields in packed structs
block/vpc: Don't take address of fields in packed structs
vmdk: Reject excess extents in blockdev-create
iotests: Add VMDK tests for blockdev-create
iotests: Filter cid numbers in VMDK extent info
vmdk: Implement .bdrv_co_create callback
vmdk: Refactor vmdk_create_extent
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The nRF51 contains three regions of non-volatile memory (NVM):
- CODE (R/W): contains code
- FICR (R): Factory information like code size, chip id etc.
- UICR (R/W): Changeable configuration data. Lock bits, Code
protection configuration, Bootloader address, Nordic SoftRadio
configuration, Firmware configuration.
Read and write access to the memories is managed by the
Non-volatile memory controller.
Memory schema:
[ CPU ] -+- [ NVM, either FICR, UICR or CODE ]
| |
\- [ NVMC ]
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190201023357.22596-2-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, the set_pc logic was unclear, which raised questions about
whether it should be used directly, applying a value to PC or adding
additional checks, for example, set the Thumb bit in Arm cpu. Let's set
the set_pc logic for “Configure the PC, as was done in the ELF file”
and implement synchronize_with_tb hook for preserving PC to cpu_tb_exec.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190129121817.7109-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the MPS2 FPGA image described in Application Note
AN521. This is identical to the AN505 image, except that it uses
the SSE-200 rather than the IoTKit and so has two Cortex-M33 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-24-peter.maydell@linaro.org
In preparation for adding support for the AN521 MPS2 image, we need
to handle wiring up the MPS2 device interrupt lines to both CPUs in
the SSE-200, rather than just the one that the IoTKit has.
Abstract out a "connect to the IoTKit interrupt line" function
and make it connect to a splitter which feeds both sets of inputs
for the SSE-200 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-23-peter.maydell@linaro.org
Add a model of the SSE-200, now we have put in all
the code that lets us make it different from the IoTKit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-22-peter.maydell@linaro.org
Instantiate a copy of the CPU_IDENTITY register block for each CPU
in an SSE-200.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-21-peter.maydell@linaro.org
The SSE-200 has a CPU_IDENTITY register block, which is a set of
read-only registers. As well as the usual PID/CID registers, there
is a single CPUID register which indicates whether the CPU is CPU 0
or CPU 1. Implement a model of this register block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-20-peter.maydell@linaro.org
The SSE-200 has a "CPU local security control" register bank; add an
unimplemented-device stub for it. (The register bank has only one
interesting register, which allows the guest to lock down changes
to various CPU registers so they cannot be modified further. We
don't support that in our Cortex-M33 model anyway.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-19-peter.maydell@linaro.org
The SSE-200 gives each CPU a register bank to use to control its
L1 instruction cache. Put in an unimplemented-device stub for this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-18-peter.maydell@linaro.org
Add unimplemented-device stubs for the various Power Policy Unit
devices that the SSE-200 has.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-17-peter.maydell@linaro.org
The SSE-200 has two Message Handling Units (MHUs), which sit behind
the APB PPC0. Wire up some unimplemented-device stubs for these,
since we don't yet implement a real model of this device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-16-peter.maydell@linaro.org
The SYS_VERSION and SYS_CONFIG register values differ between the
IoTKit and SSE-200. Make them configurable via QOM properties rather
than hard-coded, and set them appropriately in the ARMSSE code that
instantiates the IOTKIT_SYSINFO device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-15-peter.maydell@linaro.org
Create a cluster object to hold each CPU in the SSE. They are
logically distinct and may be configured differently (for instance
one may not have an FPU where the other does).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-14-peter.maydell@linaro.org
Give each CPU its own container memory region. This is necessary
for two reasons:
* some devices are instantiated one per CPU and the CPU sees only
its own device
* since a memory region can only be put into one container, we must
give each armv7m object a different MemoryRegion as its 'memory'
property, or a dual-CPU configuration will assert on realize when
the second armv7m object tries to put the MR into a container when
it is already in the first armv7m object's container
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-13-peter.maydell@linaro.org
The SSE-200 has two Cortex-M33 CPUs. These see the same view
of memory, with the exception of the "private CPU region" which
has per-CPU devices. Internal device interrupts for SSE-200
devices are mostly wired up to both CPUs, with the exception of
a few per-CPU devices. External GPIO inputs on the SSE-200
device are provided for the second CPU's interrupts above 32,
as is already the case for the first CPU.
Refactor the code to support creation of multiple CPUs.
For the moment we leave all CPUs with the same view of
memory: this will not work in the multiple-CPU case, but
we will fix this in the following commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-12-peter.maydell@linaro.org
For the IoTKit the SRAM bank size is always 32K (15 bits); for the
SSE-200 this is a configurable parameter, which defaults to 32K but
can be changed when it is built into a particular SoC. For instance
the Musca-B1 board sets it to 128K (17 bits).
Make the bank size a QOM property. We follow the SSE-200 hardware in
naming the parameter SRAM_ADDR_WIDTH, which specifies the number of
address bits of a single SRAM bank.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-11-peter.maydell@linaro.org
The SSE-200 has four banks of SRAM, each with its own
Memory Protection Controller, where the IoTKit has only one.
Make the number of SRAM banks a field in ARMSSEInfo.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-10-peter.maydell@linaro.org
The SSE-200 has 4 banks of SRAM, each with its own internal
Memory Protection Controller. The interrupt status for these
extra MPCs appears in the same security controller SECMPCINTSTATUS
register as the MPC for the IoTKit's single SRAM bank. Enhance the
iotkit-secctl device to allow 4 MPCs. (If the particular IoTKit/SSE
variant in use does not have all 4 MPCs then the unused inputs will
simply result in the SECMPCINTSTATUS bits being zero as required.)
The hardcoded constant "1"s in armsse.c indicate the actual number
of SRAM MPCs the IoTKit has, and will be replaced in the following
commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-9-peter.maydell@linaro.org
Rename the files that used to be iotkit.[ch] to
armsse.[ch] to reflect the fact they new cover
multiple Arm subsystems for embedded.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-8-peter.maydell@linaro.org
Rename various internal uses of 'iotkit' in hw/arm/iotkit.c to
'armsse', for consistency. The remaining occurences are:
* related to the devices TYPE_IOTKIT_SYSCTL, TYPE_IOTKIT_SYSINFO,
etc, which this refactor is not touching
* references that apply specifically to the IoTKit (like
the lack of a private CPU region)
* the vmstate, which keeps its old "iotkit" name for
migration compatibility reasons
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-7-peter.maydell@linaro.org
The Arm SSE-200 Subsystem for Embedded is a revised and
extended version of the older IoTKit SoC. Prepare for
adding a model of it by refactoring the IoTKit code into
an abstract base class which contains the functionality,
driven by a class data block specific to each subclass.
(This is the same approach used by the existing bcm283x
SoC family implementation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-6-peter.maydell@linaro.org
The Arm IoTKit was effectively the forerunner of a series of
subsystems for embedded SoCs, named the SSE-050, SSE-100 and SSE-200:
https://developer.arm.com/products/system-design/subsystems
These are generally quite similar, though later iterations have
extra devices that earlier ones do not.
We want to add a model of the SSE-200, which means refactoring the
IoTKit code into an abstract base class and subclasses (using the
same design that the bcm283x SoC and Aspeed SoC family
implementations do). As a first step, rename the IoTKit struct and
QOM macros to ARMSSE, which is what we're going to name the base
class. We temporarily retain TYPE_IOTKIT to avoid changing the
code that instantiates a TYPE_IOTKIT device here and then changing
it back again when it is re-introduced as a subclass.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-5-peter.maydell@linaro.org
Expose "start-powered-off" as a property of the ARMv7M container,
which we just pass through to the CPU object in the same way that we
do for "init-svtor" and "idau". (We want this for the SSE-200, which
powers up only the first CPU at reset and leaves the second powered
down.)
As with the other CPU properties here, we can't just use alias
properties, because the CPU QOM object is not created until armv7m
realize time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-4-peter.maydell@linaro.org
Rather than just creating the CPUs with object_new, make them child
objects of the armv7m container. This will allow the cluster code to
find the CPUs if an armv7m object is made a child of a cluster object.
object_new_with_props() will do the parenting for us.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-3-peter.maydell@linaro.org
Currently the ARMv7M NVIC object's realize method assumes that the
CPU the NVIC is attached to is CPU 0, because it thinks there can
only ever be one CPU in the system. To allow a dual-Cortex-M33
setup we need to remove this assumption; instead the armv7m
wrapper object tells the NVIC its CPU, in the same way that it
already tells the CPU what the NVIC is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-2-peter.maydell@linaro.org
set object owner in memory_region_init_ram() instead
of NULL.
Signed-off-by: kumar sourav <sourav.jb1988@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190125155630.17430-1-sourav.jb1988@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The new device_id property specifies which value to use for the vendor
specific designator in the Device Identification VPD page.
In particular, this is necessary for libvirt to maintain guest ABI
compatibility when no serial number is given and a VM is switched from
-drive (where the BlockBackend name is used) to -blockdev (where the
vendor specific designator is left out by default).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
scsi-disk includes in the Device Identification VPD page, depending on
configuration amongst others, a vendor specific designator that consists
either of the serial number if given or the BlockBackend name (which is
a host detail that better shouldn't have been leaked to the guest, but
now we have to maintain it for compatibility).
With anonymous BlockBackends, i.e. scsi-disk devices constructed with
drive=<node-name>, and no serial number explicitly specified, this ends
up as an empty string. If this happens to more than one disk, we have
accidentally signalled to the OS that this is a multipath setup, which
is obviously not what was intended.
Instead of using an empty string for the vendor specific designator,
simply leave out that designator, which makes Linux detect such setups
as separate disks again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch forbids attaching a disk to a SCSI device if its using a
different AioContext. Test case included.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a crash when attaching two disks with the same blockdev to
a SCSI device that is using iothreads. Test case included.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a crash when attaching a disk to a SCSI device using
iothreads, then detaching it and reattaching it again. Test case
included.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu_uuid_bswap() takes a pointer to the QemuUUID to
be byte-swapped. This means it can't be used when the UUID
to be swapped is in a packed member of a struct. It's also
out of line with the general bswap*() functions we provide
in bswap.h, which take the value to be swapped and return it.
Make qemu_uuid_bswap() take a QemuUUID and return the swapped version.
This fixes some clang warnings about taking the address of
a packed struct member in block/vdi.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the complexity of milkymist_tmu2_create() into the
source file. Doing so we avoid to include the X11/OpenGL
headers in all LM32 devices, and we also avoid the duplicate
declaration of glx_fbconfig_attr[] (it is already declared
in hw/display/milkymist-tmu2.c).
Since TYPE_MILKYMIST_TMU2 is now accessible, use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-5-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The TMU device requires both X11 and OpenGL.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-4-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Milkymist specific hardware is only used by the LM32 target,
it is pointless to compile those objects in other targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-2-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- New debugging QMP command to explore block graphs
- Converted DPRINTF()s to trace events
- Fixed qemu-io's use of getopt() for systems with optreset
- Minor NVMe emulation fixes
- An iotest fix
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcUkaiAAoJEPQH2wBh1c9AHsEIAIU0+FNjtdz7lNgyeBCSFCFa
/qWNk4+w6QBfhTTx/N0hGwh5/FvNYQhby8VHtZitE4/QcLbJwHYgWf14pwce3tP3
3qNB87AdQpKMpbajQM2x2Xy8lnlPeM7fe21Q/12vuX7AlEDT3gH+W9rg94bw2oFN
r+xBk6H5F2aVElw3CwMM7eary4+dPnnCQwAnoqM+g5hdpL+0scrIyARGw7v0hmSn
LDWESCM4a55lEYmwj1wS3J3uj6Fj00yzBvcEuCcT1GO+lXlV8/ciO9r2HqxVKwgz
4GAi/BERoMKjfn+/77/yI5flprPx2voNGgkyBY4C3z9ncnN6u02QBZSusBIWpSg=
=Kt4r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2019-01-31' into staging
Block patches:
- New debugging QMP command to explore block graphs
- Converted DPRINTF()s to trace events
- Fixed qemu-io's use of getopt() for systems with optreset
- Minor NVMe emulation fixes
- An iotest fix
# gpg: Signature made Thu 31 Jan 2019 00:51:46 GMT
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/xanclic/tags/pull-block-2019-01-31:
iotests: Allow 147 to be run concurrently
iotests: Bind qemu-nbd to localhost in 147
iotests.py: Add qemu_nbd_pipe()
nvme: use pci_dev directly in nvme_realize
nvme: ensure the num_queues is not zero
nvme: use TYPE_NVME instead of constant string
qemu-io: Add generic function for reinitializing optind.
block/sheepdog: Convert from DPRINTF() macro to trace events
block/file-posix: Convert from DPRINTF() macro to trace events
block/curl: Convert from DPRINTF() macro to trace events
block/ssh: Convert from DPRINTF() macro to trace events
scripts: add render_block_graph function for QEMUMachine
qapi: add x-debug-query-block-graph
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- code clean-up
- LGPL information clean-up
- fix typo (acpi)
-----BEGIN PGP SIGNATURE-----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=1OOM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging
- add device category (edu, i8042, sd memory card)
- code clean-up
- LGPL information clean-up
- fix typo (acpi)
# gpg: Signature made Wed 30 Jan 2019 13:21:50 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-pull-request:
virtio-blk: remove duplicate definition of VirtIOBlock *s pointer
hw/block: clean up stale xen_disk trace entries
target/m68k: Fix LGPL information in the file headers
target/s390x: Fix LGPL version in the file header comments
tcg: Fix LGPL version number
target/tricore: Fix LGPL version number
target/openrisc: Fix LGPL version number
COPYING.LIB: Synchronize the LGPL 2.1 with the version from gnu.org
Don't talk about the LGPL if the file is licensed under the GPL
hw: sd: set category of the sd memory card
hw: input: set category of the i8042 device
typo: apci->acpi
hw: edu: set category of the edu device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
User-visible changes:
* The new qemu-trace-stap script makes it convenient to collect traces without
writing SystemTap scripts. See "man qemu-trace-stap" for details.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcURdlAAoJEJykq7OBq3PIPqAH/iSkYDDeWLQy4eqeTPpbsxd4
U6mUYC/m2g1bevj1TxdFmr2g5LReGTd4w35w6/SUaLMHsu701T7gK+0z1gP2/N/D
qzJiM9xxF6xYq1P4hWJGf+XsbJ0OVf7oRwn1j8qXVBxjIxERX98z0ZUtbk/aulGi
wnNXycBufpKGk2PkQC+pBfhU2775dMqpUV49z9mqyVzsiZQlzbx8WMDQj1Ic1fbe
ZcAvX5D350HJjB3Z+9wJ1V2pC9Gu+z3TIup+YR1Bkch0ywyTCVTqcepoOXwzQamm
84bifPdObBm7SbbwtrwoVKYLrdIrbb3PTWaOlWVUKruKIIf8hzn5BxC3wChb2Qk=
=bex6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Pull request
User-visible changes:
* The new qemu-trace-stap script makes it convenient to collect traces without
writing SystemTap scripts. See "man qemu-trace-stap" for details.
# gpg: Signature made Wed 30 Jan 2019 03:17:57 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: rerun tracetool after ./configure changes
trace: improve runstate tracing
trace: add ability to do simple printf logging via systemtap
trace: forbid use of %m in trace event format strings
trace: enforce that every trace-events file has a final newline
display: ensure qxl log_buf is a nul terminated string
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no need to make another reference.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190120055558.32984-4-liq3ea@163.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When it is zero, it causes segv.
Using following command:
"-drive file=//home/test/test1.img,if=none,id=id0
-device nvme,drive=id0,serial=test,num_queues=0"
causes following Backtrack:
Thread 4 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffe9735700 (LWP 30952)]
0x0000555555a7a77c in nvme_start_ctrl (n=0x5555577473f0) at hw/block/nvme.c:825
825 if (unlikely(n->cq[0])) {
(gdb) bt
0 0x0000555555a7a77c in nvme_start_ctrl (n=0x5555577473f0)
at hw/block/nvme.c:825
1 0x0000555555a7af7f in nvme_write_bar (n=0x5555577473f0, offset=20,
data=4587521, size=4) at hw/block/nvme.c:969
2 0x0000555555a7b81a in nvme_mmio_write (opaque=0x5555577473f0, addr=20,
data=4587521, size=4) at hw/block/nvme.c:1163
3 0x0000555555869236 in memory_region_write_accessor (mr=0x555557747cd0,
addr=20, value=0x7fffe97320f8, size=4, shift=0, mask=4294967295, attrs=...)
at /home/test/qemu1/qemu/memory.c:502
4 0x0000555555869446 in access_with_adjusted_size (addr=20,
value=0x7fffe97320f8, size=4, access_size_min=2, access_size_max=8,
access_fn=0x55555586914d <memory_region_write_accessor>,
mr=0x555557747cd0, attrs=...) at /home/test/qemu1/qemu/memory.c:568
5 0x000055555586c479 in memory_region_dispatch_write (mr=0x555557747cd0,
addr=20, data=4587521, size=4, attrs=...)
at /home/test/qemu1/qemu/memory.c:1499
6 0x00005555558030af in flatview_write_continue (fv=0x7fffe0061130,
addr=4273930260, attrs=..., buf=0x7ffff7ff0028 "\001", len=4, addr1=20,
l=4, mr=0x555557747cd0) at /home/test/qemu1/qemu/exec.c:3234
7 0x00005555558031f9 in flatview_write (fv=0x7fffe0061130, addr=4273930260,
attrs=..., buf=0x7ffff7ff0028 "\001", len=4)
at /home/test/qemu1/qemu/exec.c:3273
8 0x00005555558034ff in address_space_write (
---Type <return> to continue, or q <return> to quit---
as=0x555556758480 <address_space_memory>, addr=4273930260, attrs=...,
buf=0x7ffff7ff0028 "\001", len=4) at /home/test/qemu1/qemu/exec.c:3363
9 0x0000555555803550 in address_space_rw (
as=0x555556758480 <address_space_memory>, addr=4273930260, attrs=...,
buf=0x7ffff7ff0028 "\001", len=4, is_write=true)
at /home/test/qemu1/qemu/exec.c:3374
10 0x00005555558884a1 in kvm_cpu_exec (cpu=0x555556920e40)
at /home/test/qemu1/qemu/accel/kvm/kvm-all.c:2031
11 0x000055555584cd9d in qemu_kvm_cpu_thread_fn (arg=0x555556920e40)
at /home/test/qemu1/qemu/cpus.c:1281
12 0x0000555555dbaf6d in qemu_thread_start (args=0x5555569438a0)
at util/qemu-thread-posix.c:502
13 0x00007ffff5dc86db in start_thread (arg=0x7fffe9735700)
at pthread_create.c:463
14 0x00007ffff5af188f in clone ()
at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190120055558.32984-3-liq3ea@163.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190120055558.32984-2-liq3ea@163.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
VirtIOBlock *s is already defined and initialized with req->dev
on top of virtio_blk_handle_request(), so we can remove it from
the code block of VIRTIO_BLK_T_GET_ID case.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190130095231.42081-1-sgarzare@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This should have been removed then xen_disk.c was removed but I missed them.
Fixes: 19f87870ba
xen: remove the legacy 'xen_disk' backend
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190122145132.12571-1-paul.durrant@citrix.com>
[lv: s/stake/stale/ and add "Fixes" tag]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Sets the category of the sd memory card as DEVICE_CATEGORY_STORAGE.
Devices should be assigned to one of DEVICE_CATEGORY_XXXX.
Signed-off-by: kumar sourav <sourav.jb1988@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190124162045.10474-1-sourav.jb1988@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Sets the category of i8042 device as DEVICE_CATEGORY_INPUT
Devices should be assigned to one of DEVICE_CATEGORY_XXXX.
Signed-off-by: kumar sourav <sourav.jb1988@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20190125151440.13794-1-sourav.jb1988@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
apci_1_compatible should be acpi_1_compatible.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190125094047.22276-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Sets the category of edu device as DEVICE_CATEGORY_MISC.
Devices should be assigned to one of DEVICE_CATEGORY_XXXX.
Signed-off-by: kumar sourav <sourav.jb1988@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190124144606.4352-1-sourav.jb1988@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu_write_full takes care of partial blocking writes,
as in cases of larger file sizes
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20190129131908.27924-4-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For every MTP_WRITE_BUF_SZ copied, this patch writes it to file before
getting the next block of data. The file is kept opened for the
duration of the operation but the sanity checks on the write operation
are performed only once when the write operation starts. Additionally,
we also update the file size in the object metadata once the file has
completely been written.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20190129131908.27924-3-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a "pre-patch" to breaking up the write buffer for
MTP writes. Instead of allocating a mtp buffer equal to size
sent by the initiator, we start with a small size and reallocate
multiples (of that small size) as needed.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20190129131908.27924-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement underrun/overrun events of isochronous endpoints
according to XHCI spec (4.10.3.1)
Guest software restarts data streaming when receives these events.
The XHCI reports these events using interrupter assigned
to the slot (as these events do not have TRB), so current
commit adds the field of assigned interrupter to the
XHCISlot structure. Guest software assigns interrupter to the
slot on 'Address Device' and 'Evaluate Context' commands.
Signed-off-by: Yuri Benditovich <yuri.benditovich@janustech.com>
Message-id: 20190128200444.5128-3-yuri.benditovich@janustech.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the XHCI spec (4.10.2) the controller
never halts isochronous endpoints. This commit prevent
stop of isochronous streaming when sporadic errors
status received from backends.
Signed-off-by: Yuri Benditovich <yuri.benditovich@janustech.com>
Message-id: 20190128200444.5128-2-yuri.benditovich@janustech.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's either "GNU *Library* General Public version 2" or "GNU Lesser
General Public version *2.1*", but there was no "version 2.0" of the
"Lesser" library. So assume that version 2.1 is meant here.
Additionally, suggest that the user should have received a copy of
the LGPL, and not the GPL here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1548254454-7659-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spotted by Coverity: CID 1397070
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190103133113.49599-1-liq3ea@163.com
[ kraxel: dropped chunk which adds close() after successful
fdopendir() call, that is not needed according to
POSIX even though Coverity flags it as bug ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Windows guests have trouble dealing with usb devices having identical
serial numbers. So, assign unique serial numbers to usb hid devices.
All other usb devices have this already.
In the past the fixed serial number has been used to indicate working
remote setup to linux guests. Here is a bit of history:
* First there was nothing.
* Then I added a rule to udev checking for serial == 42.
(this is in rhel-6).
* Then systemd + udev merged.
* Then I changed the rule to check for serial != 1 instead, so we can
use any serial but "1" which is the one the old broken devices had
(this is in rhel-7). March 2014 in upstream systemd.
* Then all usb power management rules where dropped from systemd (June
2015). Which I figured today (Sept 2018), after wondering that the
rules are gone in fedora 28.
So, three years ago the serial number check was dropped upstream, yet I
hav't seen a single report about autosuspend issues (or cpu usage for
usb emulation going up, which is the typical symtom).
So I figured I can stop worring that changing the serial number will
break things and just do it.
And even if it turns out autosuspend is still an issue: I think
meanwhile we can really stop worrying about guests running in old qemu
versions with broken usb suspend (fixed in 0.13 !). If needed we can
enable autosuspend unconditionally in guests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190110125108.22834-1-kraxel@redhat.com
Two small CPU model updates:
* Enable NPT and NRIPSAVE on AMD CPUs
* Update stepping of Cascadelake-Server
-----BEGIN PGP SIGNATURE-----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=Nh3Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2019-01-28
Two small CPU model updates:
* Enable NPT and NRIPSAVE on AMD CPUs
* Update stepping of Cascadelake-Server
# gpg: Signature made Mon 28 Jan 2019 19:36:52 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Enable NPT and NRIPSAVE for AMD CPUs
i386: Update stepping of Cascadelake-Server
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For TCG we want to distinguish which cluster a CPU is in, and
we need to do it quickly. Cache the cluster index in the CPUState
struct, by having the cluster object set cpu->cluster_index for
each CPU child when it is realized.
This means that board/SoC code must add all CPUs to the cluster
before realizing the cluster object. Regrettably QOM provides no
way to prevent adding children to a realized object and no way for
the parent to be notified when a new child is added to it, so
we don't have any way to enforce/assert this constraint; all
we can do is document it in a comment. We can at least put in a
check that the cluster contains at least one CPU, which should
catch the typical cases of "realized cluster too early" or
"forgot to parent the CPUs into it".
The restriction on how many clusters can exist in the system
is imposed by TCG code which will be added in a subsequent commit,
but the check to enforce it in cluster.c fits better in this one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190121152218.9592-3-peter.maydell@linaro.org
Currently the cluster implementation doesn't have any constraints
on the ordering of realizing the TYPE_CPU_CLUSTER and populating it
with child objects. We want to impose a constraint that realize
must happen only after all the child objects are added, so move
the realize of rpu_cluster. (The apu_cluster is already
realized after child population.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20190121152218.9592-2-peter.maydell@linaro.org
The m25p80 models dummy cycles using byte transfers. This works well
when the transfers are initiated by the QEMU model of a SPI controller
but when these are initiated by the OS, it breaks emulation.
Snoop the SPI transfer to catch commands requiring dummy cycles and
replace them with byte transfers compatible with the m25p80 model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20190124140519.13838-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMC controllers have a register containing the byte that will be
used as dummy output. It can be modified by software.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190124140519.13838-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The model should expose one control register per possible CS. When
testing the validity of the register number in the read operation,
replace 's->num_cs' by 'ctrl->max_slaves' which represents the maximum
number of flash devices a controller can handle.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190124140519.13838-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
0xFFFFFFFF should be returned for non implemented registers.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190124140519.13838-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we aren't going to create any RPUs, then don't create the
rpu-cluster unit. This allows us to add an assertion to the
cluster object that it contains at least one CPU, which helps
to avoid bugs in creating clusters and putting CPUs in them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190121184314.14311-1-peter.maydell@linaro.org
Recent microbit firmwares panic if the TWI magnetometer/accelerometer
devices are not detected during startup. We don't implement TWI (I2C)
so let's stub out these devices just to let the firmware boot.
Signed-off by: Steffen Görtz <contrib@steffen-goertz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190110094020.18354-2-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create and use MX PIC as a peripheral interrupt controller when more
than 1 processor is enabled on xtfpga board. Connect xtensa CPU cores to
the MX PIC and select secondary reset vector on all cores except the
first one.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
MX interrupt controller is a collection of the following devices
accessible through the external registers interface:
- interrupt distributor can route each external IRQ line to the
corresponding external IRQ pin of selected subset of connected xtensa
cores. It has per-CPU and per-IRQ enable signals and per-IRQ software
assert signals;
- IPI controller has 16 per-CPU IPI signals that may be routed to a
combination of 3 designated external IRQ pins of connected xtensa
cores;
- cache coherecy register controls core L1 cache participation in the
SMP cluster cache coherency protocol;
- runstall register lets BSP core stall and unstall AP cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Runstall signal looks very much like a level-triggered IRQ line. Provide
xtensa_get_runstall function that returns runstall IRQ.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Replace xtensa_get_extint that returns single external IRQ descriptor
with xtensa_get_extints that returns a vector of all external IRQs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
It's a one-liner used in a single place, move its implementation there
and remove its declaration.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Modern AMD CPUs support NPT and NRIPSAVE features and KVM exposes these
when present. NRIPSAVE apeared somewhere in Opteron_G3 lifetime (e.g.
QuadCore AMD Opteron 2378 has is but QuadCore AMD Opteron HE 2344 doesn't),
NPT was introduced a bit earlier.
Add the FEAT_SVM leaf to Opteron_G4/G5 and EPYC/EPYC-IBPB cpu models.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190121155051.5628-1-vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Update the stepping from 5 to 6, in order that
the Cascadelake-Server CPU model can support AVX512VNNI
and MSR based features exposed by ARCH_CAPABILITIES.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20181227024304.12182-2-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This device only implemented ISA compatibility mode and native PCI IDE
mode was missing but no clients actually need ISA mode but to the
contrary, they usually want to switch to and use device in native
PCI IDE mode. Therefore implement native PCI mode and switch default
to that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: c323f08c59b9931310c5d92503d370f77ce3a557.1548160772.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
The device is called via-ide and the modelled IDE controller is not
specific to 82C686B but is also usable independently. Therefore, change
function name prefixes accordingly to match device name.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 2905ced862c8d2ad509d73152171ce2472d72605.1548160772.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
This function is only called once from vt82c686b_ide_realize() and its
content is simple enough to not need a separate function but be
included in realize directly (as done in other IDE models except PIIX
currently).
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 47d854e0fa41dad6861107eac61327c247965566.1548160772.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
Parts of the SiI3112 mmio are identical to PCI IDE registers so we can
use the corresponding functions that were factored out into ide/pci.c.
This removes code duplication and simplifies the SiI3112 model which
also helped to spot a copy paste error where reading status of the
2nd channel read the 1st channel instead. This is also fixed here.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 793b6a7934ef2bba26b8d066bec446019efa6c5d.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
Now that no CMD646 specific parts are left in CMD646BAR (all remaining
members are really PCI IDE specific) this struct can be deleted moving
the memory regions for PCI IDE BARs to PCIIDEState where they better
belong. The CMD646 PCI IDE model is adjusted accordingly.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 4b6cb2ae150dc0d21178209e4beb1e35140a7325.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
The io mem ops callbacks are not specific to CMD646 but really follow
the PCI IDE spec so move these from cmd646.c to pci.c to allow other
PCI IDE implementations to use them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: a2b1b2b74afdc78330b8b75605687f683a249635.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
The cmd646 io mem ops callbacks only need the IDEBus which is
currently passed via a CMD646BAR struct. No need to wrap it up like
that, we can pass it directly to these callbacks which then allows to
drop the IDEBus from the CMD646BAR.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 7a31c155c9899869794499d841d30c7ef32aae47.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
There was a pointer to PCIIDEState in CMD646BAR which was set but
not used afterwards. Get rid of this unused variable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1e352f091aa601fb2e19771aac46529fe278dd91.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
INTERRUPT special register may be changed both by the core (by writing
to INTSET and INTCLEAR registers) and by external events (by triggering
and clearing HW IRQs). In MTTCG this state must be protected from
concurrent access, otherwise interrupts may be lost or spurious
interrupts may be detected.
Use atomic operations to change INTSET SR.
Fix wsr.intset so that it soesn't clear any bits.
Fix wsr.intclear so that it doesn't clear bit that corresponds to NMI.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
XTFPGA board FPGA peripheral exposes hard-coded 10MHz frequency
regardless of the actual used core frequency. Expose actual core
frequency instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use BSP reset PC as a place for the mini-bootloader because in SMP
configurations APs and BSP may have different boot addresses.
This fixes SMP linux uImage boot on xtfpga boards.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The '%m' format instructs glibc's printf()/syslog() implementation to
insert the contents of strerror(errno). Since this is a glibc extension
it should generally be avoided in QEMU due to need for portability to a
variety of platforms.
Even though vfio is Linux-only code that could otherwise use "%m", it
must still be avoided in trace-events files because several of the
backends do not use the format string and so this error information is
invisible to them.
The errno string value should be given as an explicit trace argument
instead, making it accessible to all backends. This also allows it to
work correctly with future patches that use the format string with
systemtap's simple printf code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-4-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When generating the trace-events-all file, the build system simply
concatenates all the individual trace-events files. If any one of those
files does not have a final newline, the printf format string will have
the contents of the first line of the next file appended to it, which is
usually a '#' comment.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-3-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QXL_IO_LOG command allows the guest to send log messages to the host
via a buffer in the QXLRam struct. QEMU prints these to the console if
the qxl 'guestdebug' option is set to non-zero. It will also feed them
to the trace subsystem if any backends are built-in.
In both cases the log_buf data will get treated as being as a nul
terminated string, by the printf '%s' format specifier and / or other
code reading the buffer.
QEMU does nothing to guarantee that the log_buf really is nul terminated,
so there is potential for out of bounds array access.
This would affect any QEMU which has the log, syslog or ftrace trace
backends built into QEMU. It can only be triggered if the 'qxl_io_log'
trace event is enabled, however, so they are not vulnerable without
specific administrative action to enable this.
It would also affect QEMU if the 'guestdebug' parameter is set to a
non-zero value, which again is not the default and requires explicit
admin opt-in.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-2-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Get rid of the pcspk_state global, allow pc speaker
be added using "-device isa-pcspk".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190124110810.1040-1-kraxel@redhat.com
Create an unimplemented GPIO area instead of leaving it unassigned.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
- Get rid of global_qtests in some more qtests
- typedef cleanups
- Fixes for compiling with Clang
- Force C standard to gnu99
- Don't use -nographic in qtests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJcRrXBAAoJEC7Z13T+cC21wq0P/jpawNBkGvBje8wEi/8hcAzw
iacZePdBjbVUhSAE7JAc+SqZQgvirjYVP3j6f1u15S5FmTpGNhbcyKUrQbtFn9cg
inOr5kYtoj3k9g6YPb2WD7zXX5RW6AzgjORTZnlRi0eWemfW0BKPHV0TLs9JxtAR
08k4JgGksx4itrh+Y7h9T0iorBByCvnevFPiRQThcf82DP3J9HhdKCtOAN/jVIb6
HDb5dNMMkvy4lO7tgYZUHWVwO4t2Hh/5upDsp28Tlsx3Bw3e0vdPm2fkGpmp77U2
O7GDkxKJrPBw4VvNSxh9piVM8vWovIvO0irPao8H7ZcRFQXBiPsV/DTbmXei2YUV
j3c7s4TFerbIYHKRphUmY2ok6VClaZQPs+vl7QU6BXQLEgS+aVKfIoLOxHpOOPcq
x11ppsreWxZ3FQWIBgeV4CicO7l3eS8m/l9qIbesb3ChBeWR8DeriQ+a/lQ7gHLt
rGemVuvpzIIHDj8vwJhpzOI6ecJB4ucA9aA67dMET57pic74uabS/LnqmNs88vYH
nHT2gPZbzZCRg2wsP8RcAV4aooYqwMpKvuxBwbXgQC4UUjLtq6NPQIcwRVRr73dF
6xoB1M9THPr/N5SrCSH4b2mB3exJrzBTu/cjFqwileW62zYF8G2dhgKAVWASghJi
0ecexmiZOl3XH9GXXbGL
=X/Yb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-01-22' into staging
- Use more CONFIG Makefile switches for qtests
- Get rid of global_qtests in some more qtests
- typedef cleanups
- Fixes for compiling with Clang
- Force C standard to gnu99
- Don't use -nographic in qtests
# gpg: Signature made Tue 22 Jan 2019 06:18:41 GMT
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-01-22: (26 commits)
tests: remove rule for nonexisting qdev-monitor-test
tests/hexloader-test: Don't pass -nographic to the QEMU under test
configure: Force the C standard to gnu99
seccomp: Work-around GCC 4.x bug in gnu99 mode
block: Work-around a bug in libiscsi 1.9.0 when used in gnu99 mode
linux-user: Fix compilation with clang 3.4
virtio-net: Fix VirtIONet typedef redefinition
ppc: Fix duplicated typedefs to be able to compile with Clang in gnu99 mode
ppc: Move spapr-related prototypes from xics.h into a seperate header file
ui/console: Remove PixelFormat from qemu/typedefs.h
ui/console: Remove MouseTransformInfo from qemu/typedefs.h
ui/console: Remove DisplayState/DisplaySurface from "qemu/typedefs.h"
ui/console: Remove QemuDmaBuf from "qemu/typedefs.h"
audio: Remove AudioState from "qemu/typedefs.h"
hw/i386: Remove PCMachineClass from "qemu/typedefs.h"
hw/char/serial: Remove SerialState from "qemu/typedefs.h"
hw/bt: Remove HCIInfo from "qemu/typedefs.h"
hw/i2c/smbus: Remove SMBusDevice from "qemu/typedefs.h"
hw/ide/ahci: Remove AllwinnerAHCIState from "qemu/typedefs.h"
hw/pcmcia: Remove PCMCIACardState from "qemu/typedefs.h"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When compiling with Clang in -std=gnu99 mode, there is a warning/error:
CC ppc64-softmmu/hw/intc/xics_spapr.o
In file included from /home/thuth/devel/qemu/hw/intc/xics_spapr.c:34:
/home/thuth/devel/qemu/include/hw/ppc/xics.h:203:34: error: redefinition of typedef 'sPAPRMachineState' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef struct sPAPRMachineState sPAPRMachineState;
^
/home/thuth/devel/qemu/include/hw/ppc/spapr_irq.h:25:34: note: previous definition is here
typedef struct sPAPRMachineState sPAPRMachineState;
^
We have to remove the duplicated typedef here and include "spapr.h" instead.
But "spapr.h" should not be included for the pnv machine files. So move
the spapr-related prototypes into a new file called "xics_spapr.h" instead.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Clang compilation fix
* Coverity fix
* Various fixes for the pvrdma device
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcQupRAAoJEDbUwPDPL+RtlUkIALWOiY0kCWUrleLBrmlP8iDs
bsv24vQsttL/2yIjf95p5dlv9mU6WTlhC3PjgqtCti8x7Lfw5zxUrQXX4Pe9kVo/
Zw5iaRvTtI6A+2w5av4DbBoKhXfegz8my+Q8A10gyRTa2IiFhzZf6tR5yttgZBaI
89IpCKrMZ1PF/Si8o5JWKItKbv2nF86EgzeorzsQro5fHzbAAuFif8yCGIeev8v6
aNCLEBYjUBs3opLGCjgwkif2s1Xypknr5/WJQ/MMInkM3pH0Q2kg7ig6RzPXGIAy
gKV/6hGcbeE38d45GH3/q8cDrjuTno5f+OcUVbwAveuKdbiAbB2dH3tjkoVt6zs=
=E6e1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcel/tags/rdma-pull-request' into staging
RDMA queue
* Clang compilation fix
* Coverity fix
* Various fixes for the pvrdma device
# gpg: Signature made Sat 19 Jan 2019 09:13:53 GMT
# gpg: using RSA key 36D4C0F0CF2FE46D
# gpg: Good signature from "Marcel Apfelbaum <marcel.apfelbaum@zoho.com>"
# gpg: aka "Marcel Apfelbaum <marcel@redhat.com>"
# gpg: aka "Marcel Apfelbaum <marcel.apfelbaum@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B1C6 3A57 F92E 08F2 640F 31F5 36D4 C0F0 CF2F E46D
* remotes/marcel/tags/rdma-pull-request:
contrib/rdmacm-mux: fix clang compilation
hw/rdma: modify struct initialization
contrib/rdmacm-mux: remove Wno-format-truncation flag
hw: rdma: fix an off-by-one issue
hw/rdma: Verify that ptr is not NULL before freeing
hw/pvrdma: Make function pvrdma_qp_send/recv return void.
hw/pvrdma: Post CQE when receive invalid gid index
hw/rdma: Delete unused struct member
hw/pvrdma: Remove max-sge command-line param
docs/pvrdma: Update rdmacm-mux documentation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcQfb3AAoJENSXKoln91plXOkH/Rb+3IUi3ziXLaIo18fvMYcO
PY4cT/+3Lv9a8aa3/L1QFEYjI8Mu5s8MCQbQbOckifnusPao4bCHrVzhnwrchelb
DnkccwJcbyMkPAB2EqsUDNIRLiA6EmaXu4d9ve8HEo4mB3uy/OcOUo6YtotaPuV6
Z9kAyS1lnXOkrlbWU0ZgmEvvw8Mhs/XED3HOtzPpfrOVKnpObPqdMLPsVLqC761k
LZ6vbrjo2ELBwp+3WVaXDmLrNLF/qXd3NyFKPQ+EI8q3o7+7OpBptXOkuwT9CvAy
NzAMBFAIsKo90C1PD5hzlyYeoaEkyGBR0Uquiz+FkxUr9NuKs40qOEEjwd5njPg=
=q6sK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-january-17-2019-v2' into staging
MIPS queue for January 17, 2019 - v2
# gpg: Signature made Fri 18 Jan 2019 15:55:35 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-january-17-2019-v2:
target/mips: Introduce 32 R5900 multimedia registers
target/mips: Rename 'rn' to 'register_name'
target/mips: Add CP0 register MemoryMapID
target/mips: Amend preprocessor constants for CP0 registers
target/mips: Update ITU to handle bus errors
target/mips: Update ITU to utilize SAARI and SAAR CP0 registers
target/mips: Add field and R/W access to ITU control register ICR0
target/mips: Provide R/W access to SAARI and SAAR CP0 registers
target/mips: Add fields for SAARI and SAAR CP0 registers
target/mips: Use preprocessor constants for 32 major CP0 registers
target/mips: Add preprocessor constants for 32 major CP0 registers
target/mips: Move comment containing summary of CP0 registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In virtio_balloon_get_config() we initialize a struct virtio_balloon_config
which we then copy to guest memory. However, the local variable is not
zero initialized. This works OK at the moment because we initialize
all the fields in it; however an upcoming kernel header change will
add some new fields. If we don't zero out the whole struct then we
will start leaking a small amount of the contents of QEMU's stack
to the guest as soon as we update linux-headers/ to a set of headers
that includes the new fields.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190118183603.24757-1-peter.maydell@linaro.org
The %lu format string is different depending on the host architecture
which causes builds like the debian-armhf-cross build to fail. Use the
correct PRi64 format string.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190116121350.23863-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PHY behind the MAC of an Aspeed SoC can be controlled using two
different MDC/MDIO interfaces. The same registers PHYCR (MAC60) and
PHYDATA (MAC64) are involved but they have a different layout.
BIT31 of the Feature Register (MAC40) controls which MDC/MDIO
interface is active.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190111125759.31577-1-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's report IO-coherent access is supported for translation
table walks, descriptor fetches and queues by setting the COHACC
override flag. Without that, we observe wrong command opcodes.
The DT description also advertises the dma coherency.
Fixes a703b4f6c1 ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20190107101041.765-1-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the device is disabled, the internal circuitry keeps the data
register loaded and doesn't update it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190104182057.8778-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not initialize structs with {0} since some
CLANG versions do not support it.
Use {} construct instead.
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190118124614.24548-3-marcel.apfelbaum@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
In rdma_rm_get_backend_gid_index(), the 'sgid_idx' is used
to index the array 'dev_res->port.gid_tbl' which size is
MAX_PORT_GIDS. Current the 'sgid_idx' may be MAX_PORT_GIDS
thus cause an off-by-one issue.
Spotted by Coverity: CID 1398594
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190103131251.49271-1-liq3ea@163.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
To cover the case where fini() was called even when init() fails make
sure objects are not NULL before calling to non-null-safe destructors.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190116151538.14088-1-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
The functions handles errors internaly, callers have nothing to do with
the return value.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20190109202140.4051-1-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
This error should propagate back to guest.
Spotted by Coverity: CID 1398595
Fixes: 2b05705dc8
Reported-by: Li Qiang <liq3ea@163.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
This member is used only in init_device_caps function, make it local.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This parameter has no effect, fix it.
The function init_dev_caps sets the front-end's max-sge to MAX_SGE. Then
it checks backend's max-sge and adjust it accordingly (we can't send
more than what the device supports).
On send and recv we need to make sure the num_sge in the WQE does not
exceeds the backend device capability.
This check is done in pvrdma level so check on rdma level is deleted.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20190109194123.3468-1-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Update ITU to handle bus errors.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Update ITU to utilize SAARI and SAAR CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add field and R/W access to ITU control register ICR0.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Common function measurement block is used to report zPCI internal
counters of successful pcilg/stg/stb and rpcit instructions to
a memory location provided by the program.
This patch introduces a new ZpciFmb structure and schedules a timer
callback to copy the zPCI measures to the FMB in the guest memory
at an interval time set to 4s.
An error while attemping to update the FMB, would generate an error
event to the guest.
The pcilg/stg/stb and rpcit interception handlers increase the
related counter on a successful call.
The guest shall pass a null FMBA (FMB address) in the FIB (Function
Information Block) when it issues a Modify PCI Function Control
instruction to switch off FMB and stop the corresponding timer.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <1546969050-8884-2-git-send-email-pmorel@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
... otherwise two successive calls to qdev_unplug() (e.g. by an impatient
user) will effectively overwrite pbdev->release_timer, resulting in a
memory leak. We are already processing the unplug.
If there is already a release_timer, the unplug will be performed after
the timeout.
Can be easily triggered by
(hmp) device_add virtio-mouse-pci,id=test
(hmp) stop
(hmp) device_del test
(hmp) device_del test
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190114103110.10909-5-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We should always get rid of it. I don't see a reason to keep the timer
alive if the devices are going away. This looks like a memory leak.
(hmp) device_add virtio-mouse-pci,id=test
(hmp) device_del test
-> guest notified, timer pending.
-> guest does not react for some reason (e.g. crash)
-> s390_pcihost_timer_cb(). Timer not pending anymore. qmp_unplug().
-> Device deleted. Timer expired (not pending) but not freed.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190114103110.10909-4-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's move most of the checks to the new pre_plug handler. As a PCI
bridge is just a PCI device, we can simplify the code.
Notes: We cannot yet move the MSIX check or device ID creation +
zPCI device creation to the pre_plug handler as both parts are not
fixed before actual device realization (and therefore after pre_plug and
before plug). Once that part is factored out, we can move these parts to
the pre_plug handler, too and therefore remove all possible errors from
the plug handler.
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190114103110.10909-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We directly have it in our hands.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190114103110.10909-2-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The size of the accessible iommu memory region in the guest
is given to the IOMMU by the guest through the mpcifc request
specifying the PCI Base Address and the PCI Address Limit.
Let's set the size of the IOMMU region to:
(PCI Address Limit) - (PCI Base Address) + 1.
Fixes: f7c40aa1e7 ("s390x/pci: fix failures of dma map/unmap")
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <1547125207-16907-2-git-send-email-pmorel@linux.ibm.com>
Acked-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Comit 2c28c49057 ("s390x/pci: let pci devices start in configured mode")
changed the initial state of zPCI devices from ZPCI_FS_STANDBY to
ZPCI_FS_DISABLED (a.k.a. configured). However we still only send a
HP_EVENT_RESERVED_TO_STANDBY event to the guest, indicating a wrong
state.
Let's send a HP_EVENT_TO_CONFIGURED event instead, to match the actual
state the device is in.
This fixes hotplugged devices having to be enabled explicitly in the
guest e.g. via echo 1 > /sys/bus/pci/slots/00000000/power.
On real HW, a PCI device always pops up in the STANDBY state. In QEMU,
we decided to let it show up directly in the configured state (as
configuring it is otherwise just an extra burden for the admin). We can
safely bypass the STANDBY state when hotplugging PCI devices to a guest.
Fixes: 2c28c49057 ("s390x/pci: let pci devices start in configured mode")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190110210358.24035-1-david@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When getting the 'pbdev', the if...else has no default branch.
From Coverity, the 'pbdev' maybe null when the 'dev' is not
the TYPE_PCI_BRIDGE/TYPE_PCI_DEVICE/TYPE_S390_PCI_DEVICE.
This patch adds a default branch for device plug and unplug.
Spotted by Coverity: CID 1398593
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190108151114.33140-1-liq3ea@163.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
GCC 8 added a -Wstringop-truncation warning:
The -Wstringop-truncation warning added in GCC 8.0 via r254630 for
bug 81117 is specifically intended to highlight likely unintended
uses of the strncpy function that truncate the terminating NUL
character from the source string.
This new warning leads to compilation failures:
CC hw/acpi/core.o
In function 'acpi_table_install', inlined from 'acpi_table_add' at qemu/hw/acpi/core.c:296:5:
qemu/hw/acpi/core.c:184:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
make: *** [qemu/rules.mak:69: hw/acpi/core.o] Error 1
Use the QEMU_NONSTRING attribute, since ACPI tables don't require the
strings to be NUL-terminated.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When using the generated memory hotplug AML, the iasl
compiler would give the following error:
dsdt.dsl 266: Return (MOST (_UID, Arg0, Arg1, Arg2))
Error 6080 - Called method returns no value ^
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note: the "Platform Reset Attack Mitigation" specification isn't
explicit about NVDIMM, since they could have different usages. It uses
the term "system memory" generally (and also "volatile memory RAM" in
its introduction). For initial support, I propose to consider
non-volatile memory as not being subject to the memory clear. There is
an on-going discussion in the TCG "pcclientwg" working group for
future revisions.
CPU cache clearing is done unconditionally in edk2 since commit
d20ae95a13e851 (edk2-stable201811).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The interface is described in the "TCG Platform Reset Attack
Mitigation Specification", chapter 6 "ACPI _DSM Function". According
to Laszlo, it's not so easy to implement in OVMF, he suggested to do
it in qemu instead.
See specification documentation for more details, and next commit for
memory clear on reset handling.
The underlying TCG specification is accessible from the following
page.
https://trustedcomputinggroup.org/resource/pc-client-work-group-platform-reset-attack-mitigation-specification-version-1-0/
This patch implements version 1.0.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The TPM Physical Presence interface consists of an ACPI part, a shared
memory part, and code in the firmware. Users can send messages to the
firmware by writing a code into the shared memory through invoking the
ACPI code. When a reboot happens, the firmware looks for the code and
acts on it by sending sequences of commands to the TPM.
This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't
assume that SMIs are necessary to use. It uses a similar datastructure for
the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use
of it. I extended the shared memory data structure with an array of 256
bytes, one for each code that could be implemented. The array contains
flags describing the individual codes. This decouples the ACPI implementation
from the firmware implementation.
The underlying TCG specification is accessible from the following page.
https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/
This patch implements version 1.30.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André - ACPI code improvements and windows fixes ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid having to hard code the base address of the PPI virtual
memory device we introduce a fw_cfg file etc/tpm/config that holds the
base address of the PPI device, the version of the PPI interface and
the version of the attached TPM.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André: renamed to etc/tpm/config, made it static, document it ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement a virtual memory device for the TPM Physical Presence interface.
The memory is located at 0xFED45000 and used by ACPI to send messages to the
firmware (BIOS) and by the firmware to provide parameters for each one of
the supported codes.
This interface should be used by all TPM devices on x86 and can be
added by calling tpm_ppi_init_io().
Note: bios_linker cannot be used to allocate the PPI memory region,
since the reserved memory should stay stable across reboots, and might
be needed before the ACPI tables are installed.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following patches implement the TPM Physical Presence Interface,
make use of a new memory region and a fw_cfg entry. Enable PPI by
default with >=4.0 machine type, to avoid migration issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's supplement the msi_uninit() when failing to realize
the pci edu device.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fei Li <shirley17fei@gmail.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The disable-legacy and disable-modern properties apply only to
some virtio-pci devices. Make those properties optional.
This fixes the crash introduced by commit f6e501a28e ("virtio: Provide
version-specific variants of virtio PCI devices"):
$ qemu-system-x86_64 -machine pc-i440fx-2.6 \
-device virtio-net-pci-non-transitional
Unexpected error in object_property_find() at qom/object.c:1092:
qemu-system-x86_64: -device virtio-net-pci-non-transitional: can't apply \
global virtio-pci.disable-modern=on: Property '.disable-modern' not found
Aborted (core dumped)
Reported-by: Thomas Huth <thuth@redhat.com>
Fixes: f6e501a28e ("virtio: Provide version-specific variants of virtio PCI devices")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio console and qga tests also depend on CONFIG_VIRTIO_SERIAL.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notice that we can't still run tests with it disabled. Both cdrom-test and
drive_del-test use virtio-scsi without checking if it is enabled.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For consistency with other devices, rename
virtio_host_{initfn,pci_info} to virtio_input_host_{initfn,info}.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allocated feature bit changed in spec draft per TC request.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds implementation of RX packets
coalescing, compatible with requirements of Windows
Hardware compatibility kit.
The device enables feature VIRTIO_NET_F_RSC_EXT in
host features if it supports extended RSC functionality
as defined in the specification.
This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4,
VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks
this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS
is also present.
If the guest driver acks VIRTIO_NET_F_RSC_EXT feature,
the device coalesces TCPv4 and TCPv6 packets (if
respective VIRTIO_NET_F_GUEST_TSO feature is on,
populates extended RSC information in virtio header
and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags.
The device does not recalculate checksums in the coalesced
packet, so they are not valid.
In this case:
All the data packets in a tcp connection are cached
to a single buffer in every receive interval, and will
be sent out via a timer, the 'virtio_net_rsc_timeout'
controls the interval, this value may impact the
performance and response time of tcp connection,
50000(50us) is an experience value to gain a performance
improvement, since the whql test sends packets every 100us,
so '300000(300us)' passes the test case, it is the default
value as well, tune it via the command line parameter
'rsc_interval' within 'virtio-net-pci' device, for example,
to launch a guest with interval set as '500000':
'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00,
guest_rsc_ext=on,rsc_interval=500000'
The timer will only be triggered if the packets pool is not empty,
and it'll drain off all the cached packets.
'NetRscChain' is used to save the segments of IPv4/6 in a
VirtIONet device.
A new segment becomes a 'Candidate' as well as it passed sanity check,
the main handler of TCP includes TCP window update, duplicated
ACK check and the real data coalescing.
An 'Candidate' segment means:
1. Segment is within current window and the sequence is the expected one.
2. 'ACK' of the segment is in the valid window.
Sanity check includes:
1. Incorrect version in IP header
2. An IP options or IP fragment
3. Not a TCP packet
4. Sanity size check to prevent buffer overflow attack.
5. An ECN packet
Even though, there might more cases should be considered such as
ip identification other flags, while it breaks the test because
windows set it to the same even it's not a fragment.
Normally it includes 2 typical ways to handle a TCP control flag,
'bypass' and 'finalize', 'bypass' means should be sent out directly,
while 'finalize' means the packets should also be bypassed, but this
should be done after search for the same connection packets in the
pool and drain all of them out, this is to avoid out of order fragment.
All the 'SYN' packets will be bypassed since this always begin a new'
connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a
finalization, because this normally happens upon a connection is going
to be closed, an 'URG' packet also finalize current coalescing unit.
Statistics can be used to monitor the basic coalescing status, the
'out of order' and 'out of window' means how many retransmitting packets,
thus describe the performance intuitively.
Difference between ip v4 and v6 processing:
Fragment length in ipv4 header includes itself, while it's not
included for ipv6, thus means ipv6 can carry a real 65535 payload.
Note that main goal of implementing this feature in software
is to create reference setup for certification tests. In such
setups guest migration is not required, so the coalesced packets
not yet delivered to the guest will be lost in case of migration.
Signed-off-by: Wei Xu <wexu@redhat.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the vhost-user-test assumes the eventfd is available.
However it's not true because the accel is qtest. So the
'vhost_set_vring_file' will not add fds to the msg and the server
side of vhost-user-test will be broken. The bug is in 'ioeventfd_enabled'.
We should make this function return true if not using kvm accel.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memset vhost_dev to zero in the vhost_dev_cleanup function.
This causes dev.vqs to be NULL, so that
vqs does not free up space when calling the g_free function.
This will result in a memory leak. But you can't release vqs
directly in the vhost_dev_cleanup function, because vhost_net
will also call this function, and vhost_net's vqs is assigned by array.
In order to solve this problem, we first save the pointer of vqs,
and release the space of vqs after vhost_dev_cleanup is called.
Signed-off-by: Jian Wang <wangjian161@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's been marked as deprecated in QEMU v2.6.0 already, so really nobody
should use the legacy "ivshmem" device anymore (but use ivshmem-plain or
ivshmem-doorbell instead). Time to remove the deprecated device now.
Belatedly also update a mention of the deprecated "ivshmem" in the file
docs/specs/ivshmem-spec.txt to "ivshmem-doorbell". Missed in commit
5400c02b90 ("ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In msix_exclusive_bar the bar_pba_size is more than what the pba is
expected to have, although this never affects the bar size.
Specifically, the math in msix_init_exclusive_bar allocates too much
memory in some cases.
For example consider nentries = 8. msix_exclusive_bar will give us
bar_pba_size = 16. So 16 bytes. However 8 bytes would be enough - this
is all that the spec requires.
So in practice bar_pba_size sometimes allocates an extra 8 bytes but
never more.
Since each MSIX entry size is 16 bytes, and since we make sure that
table+pba is a power of two, this always leaves a multiple of 16 bytes
for the PBA, so extra 8 bytes have no effect.
However, its ugly to have pba size temporary variable have an incorrect
value. For consistency switch to the formula used in msix_init.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We better stop right away. For now, errors would be partially ignored
(so the guest might get informed or the device might get unplugged),
although actual plug/unplug will be reported as failed to the user.
While at it, properly move the check to the pre_plug handler for the plug
case, as we can test the slot state before the device will be realized.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
(Borislav Petkov)
* host-phys-bits-limit option for better control of 5-level EPT
(Eduardo Habkost)
* Disable MPX support on named CPU models (Paolo Bonzini)
* expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX
as feature words (Vitaly Kuznetsov)
-----BEGIN PGP SIGNATURE-----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=S08V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2019-01-14
* Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
(Borislav Petkov)
* host-phys-bits-limit option for better control of 5-level EPT
(Eduardo Habkost)
* Disable MPX support on named CPU models (Paolo Bonzini)
* expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX
as feature words (Vitaly Kuznetsov)
# gpg: Signature made Mon 14 Jan 2019 14:33:55 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386/kvm: add a comment explaining why .feat_names are commented out for Hyper-V feature bits
x86: host-phys-bits-limit option
target/i386: Disable MPX support on named CPU models
target-i386: Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
i386/kvm: expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX as feature words
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MPX support is being phased out by Intel; GCC has dropped it, Linux
is also going to do that. Even though KVM will have special code
to support MPX after the kernel proper stops enabling it in XCR0,
we probably also want to deprecate that in a few years. As a start,
do not enable it by default for any named CPU model starting with
the 4.0 machine types; this include Skylake, Icelake and Cascadelake.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181220121100.21554-1-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The missing functionality was added ~3 years ago with the Linux commit
46896c73c1a4 ("KVM: svm: add support for RDTSCP")
so reenable RDTSCP support on those CPU models.
Opteron_G2 - being family 15, model 6, doesn't have RDTSCP support
(the real hardware doesn't have it. K8 got RDTSCP support with the NPT
models, i.e., models >= 0x40).
Document the host's minimum required kernel version, while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Message-ID: <20181212200803.GG6653@zn.tnic>
[ehabkost: moved compat properties code to pc.c]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The xen-block dataplane currently allocates memory to hold the data for
each request as that request is used, and frees it afterwards. Because
it requires page-aligned blocks, this interacts poorly with non-page-
aligned allocations and balloons the heap.
Instead, allocate the maximum possible buffer size required for the
protocol, which is BLKIF_MAX_SEGMENTS_PER_REQUEST (currently 11) pages
when the request structure is created, and keep that buffer until it is
destroyed. Since the requests are re-used via a free list, this should
actually improve memory usage.
Signed-off-by: Tim Smith <tim.smith@citrix.com>
Re-based and commit comment adjusted.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
If the I/O ring is full, the guest cannot send any more requests
until some responses are sent. Only sending all available responses
just before checking for new work does not leave much time for the
guest to supply new work, so this will cause stalls if the ring gets
full. Also, not completing reads as soon as possible adds latency
to the guest.
To alleviate that, complete IO requests as soon as they come back.
xen_block_send_response() already returns a value indicating whether
a notify should be sent, which is all the batching we need.
Signed-off-by: Tim Smith <tim.smith@citrix.com>
Re-based and commit comment adjusted.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
When I/O consists of many small requests, performance is improved by
batching them together in a single io_submit() call. When there are
relatively few requests, the extra overhead is not worth it. This
introduces a check to start batching I/O requests via blk_io_plug()/
blk_io_unplug() in an amount proportional to the number which were
already in flight at the time we started reading the ring.
Signed-off-by: Tim Smith <tim.smith@citrix.com>
Re-based and commit comment adjusted.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
xend have been replaced by libxenlight (libxl) for many Xen releases
now.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
It is broken since Xen 4.9 [1] and it will not build in Xen 4.12. Also,
it is not built by default since QEMU 2.6.
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-09/msg00313.html
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This backend has now been replaced by the 'xen-qdisk' XenDevice.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds create and destroy function for XenBlockDevice-s so that
they can be created automatically when the Xen toolstack instantiates a new
PV backend via xenstore. When the XenBlockDevice is created this way it is
also necessary to create a 'drive' which matches the configuration that the
Xen toolstack has written into xenstore. This is done by formulating the
parameters necessary for each 'blockdev' layer of the drive and then using
qmp_blockdev_add() to create the layers. Also, for compatibility with the
legacy 'xen_disk' implementation, an iothread is automatically created for
the new XenBlockDevice. This, like the driver layers, will be destroyed
after the XenBlockDevice is unrealized.
The legacy backend scan for 'qdisk' is removed by this patch, which makes
the 'xen_disk' code is redundant. The code will be removed by a subsequent
patch.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
...that maintains compatibility with existing Xen toolstacks.
Xen toolstacks instantiate PV backends by simply writing information into
xenstore and expecting a backend implementation to be watching for this.
This patch adds a new 'xen-backend' module to allow individual XenDevice
implementations to register create and destroy functions. The creator
will be called when a tool-stack instantiates a new backend in this way,
and the destructor will then be called after the resulting XenDevice
object is unrealized.
To support this it is also necessary to add new watchers into the XenBus
implementation to handle enumeration of new backends and also destruction
of XenDevice-s when the toolstack sets the backend 'online' key to 0.
NOTE: This patch only adds the framework. A subsequent patch will add a
creator function for xen-block devices.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
...and wire in the dataplane.
This patch adds the remaining code to make the xen-block XenDevice
functional. The parameters that a block frontend expects to find are
populated in the backend xenstore area, and the 'ring-ref' and
'event-channel' values specified in the frontend xenstore area are
mapped/bound and used to set up the dataplane.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This is a purely cosmetic patch that purges remaining use of 'blk' and
'ioreq' in local function names, and then makes sure all functions are
prefixed with 'xen_block_'.
No functional change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This is a purely cosmetic patch that purges the name 'ioreq' from struct,
variable and field names. (This name has been problematic for a long time
as 'ioreq' is the name used for generic I/O requests coming from Xen).
The patch replaces 'struct ioreq' with a new 'XenBlockRequest' type and
'ioreq' field/variable names with 'request', and then does necessary
fix-up to adhere to coding style.
Function names are not modified by this patch. They will be dealt with in
a subsequent patch.
No functional change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This is a purely cosmetic patch that substitutes the old 'struct XenBlkDev'
name with 'XenBlockDataPlane' and 'blkdev' field/variable names with
'dataplane', and then does necessary fix-up to adhere to coding style.
No functional change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds the transformations necessary to get dataplane/xen-block.c
to build against the new XenBus/XenDevice framework. MAINTAINERS is also
updated due to the introduction of dataplane/xen-block.h.
NOTE: Existing data structure names are retained for the moment. These will
be modified by subsequent patches. A typedef for XenBlockDataPlane
has been added to the header (based on the old struct XenBlkDev name
for the moment) so that the old names don't need to leak out of the
dataplane code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Not all of the code duplicated from xen_disk.c is required as the basis for
the new dataplane implementation so this patch removes extraneous code,
along with the legacy #includes and calls to the legacy xen_pv_printf()
function. Error messages are changed to be reported using error_report().
NOTE: The code is still not yet built. Further transformations will be
required to make it correctly interface to the new XenBus/XenDevice
framework. They will be delivered in a subsequent patch.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The new xen-block XenDevice implementation requires the same core
dataplane as the legacy xen_disk implementation it will eventually replace.
This patch therefore copies the legacy xen_disk.c source module into a new
dataplane/xen-block.c source module as the basis for the new dataplane and
adjusts the MAINTAINERS file accordingly.
NOTE: The duplicated code is not yet built. It is simply put into place by
this patch (just fixing style violations) such that the
modifications that will need to be made to the code are not
conflated with code movement, thus making review harder.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The legacy PV backend infrastructure provides functions to bind, unbind
and send notifications to event channnels. Similar functionality will be
required by XenDevice implementations so this patch adds the necessary
support.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Patch squashed with:
Patch "xen: add event channel interface for XenDevice-s" makes use of
the type xenevtchn_port_or_error_t, but this isn't avaiable before Xen
4.7. Also the function xen_device_bind_event_channel assign the return
value of xenevtchn_bind_interdomain to channel->local_port but check the
result for error with xendev->local_port.
Fix by:
- removing local_port from struct XenDevice as it isn't use anywere.
- adding a compatibility typedef for xenevtchn_port_or_error_t for Xen
4.6 and earlier.
As extra, replace the type of XenEventChannel->local_port by
evtchn_port_t.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
The legacy PV backend infrastructure provides functions to map, unmap and
copy pages granted by frontends. Similar functionality will be required
by XenDevice implementations so this patch adds the necessary support.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
A Xen PV frontend communicates its state to the PV backend by writing to
the 'state' key in the frontend area in xenstore. It is therefore
necessary for a XenDevice implementation to be notified whenever the
value of this key changes.
This patch adds code to do this as follows:
- an 'fd handler' is registered on the libxenstore handle which will be
triggered whenever a 'watch' event occurs
- primitives are added to xen-bus-helper to add or remove watch events
- a list of Notifier objects is added to XenBus to provide a mechanism
to call the appropriate 'watch handler' when its associated event
occurs
The xen-block implementation is extended with a 'frontend_changed' method,
which calls as-yet stub 'connect' and 'disconnect' functions when the
relevant frontend state transitions occur. A subsequent patch will supply
a full implementation for these functions.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds a new source module, xen-bus-helper.c, which builds on
basic libxenstore primitives to provide functions to create (setting
permissions appropriately) and destroy xenstore areas, and functions to
'printf' and 'scanf' nodes therein. The main xen-bus code then uses
these primitives [1] to initialize and destroy the frontend and backend
areas for a XenDevice during realize and unrealize respectively.
The 'xen-block' implementation is extended with a 'get_name' method that
returns the VBD number. This number is required to 'name' the xenstore
areas.
NOTE: An exit handler is also added to make sure the xenstore areas are
cleaned up if QEMU terminates without devices being unrealized.
[1] The 'scanf' functions are actually not yet needed, but they will be
needed by code delivered in subsequent patches.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds new XenDevice-s: 'xen-disk' and 'xen-cdrom', both derived
from a common 'xen-block' parent type. These will eventually replace the
'xen_disk' (note the underscore rather than hyphen) legacy PV backend but
it is illustrative to build up the implementation incrementally, along with
the XenBus/XenDevice framework. Subsequent patches will therefore add to
these devices' implementation as new features are added to the framework.
After this patch has been applied it is possible to instantiate new
'xen-disk' or 'xen-cdrom' devices with a single 'vdev' parameter, which
accepts values adhering to the Xen VBD naming scheme [1]. For example, a
command-line instantiation of a xen-disk can be done with an argument
similar to the following:
-device xen-disk,vdev=hda
The implementation of the vdev parameter formulates the appropriate VBD
number for use in the PV protocol.
[1] https://xenbits.xen.org/docs/unstable/man/xen-vbd-interface.7.html
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds the basic boilerplate for a 'XenBus' object that will act
as a parent to 'XenDevice' PV backends.
A new 'XenBridge' object is also added to connect XenBus to the system bus.
The XenBus object is instantiated by a new xen_bus_init() function called
from the same sites as the legacy xen_be_init() function.
Subsequent patches will flesh-out the functionality of these objects.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
...and xen_backend.h to xen-legacy-backend.h
Rather than attempting to convert the existing backend infrastructure to
be QOM compliant (which would be hard to do in an incremental fashion),
subsequent patches will introduce a completely new framework for Xen PV
backends. Hence it is necessary to re-name parts of existing code to avoid
name clashes. The re-named 'legacy' infrastructure will be removed once all
backends have been ported to the new framework.
This patch is purely cosmetic. No functional change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
For some pci device, even its PCI_INTERRUPT_PIN is not 0, it actually
doesn't support INTx mode, so its machine irq read from host sysfs is 0.
In that case, report PCI_INTERRUPT_PIN as 0 to guest and let passthrough
continue.
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Coverity (CID 796599) points out that xen_pt_setup_vga() trusts
the rom->size field in the BIOS ROM from a PCI passthrough VGA
device, and uses it as an index into the memory which contains
the BIOS image. A corrupt BIOS ROM could therefore cause us to
index off the end of the buffer.
Check that the size is within bounds before we use it.
We are also trusting the pcioffset field, and assuming that
the whole rom_header is present; Coverity doesn't notice these,
but check them too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
* esp bugfixes (Guenter)
* Windows build cleanup (Marc-André)
* checkpatch logic improvements (Paolo)
* coalesced range bugfix (Paolo)
* switch testsuite to TAP (Paolo)
* QTAILQ rewrite (Paolo)
* block/iscsi.c cancellation fixes (Stefan)
* improve selection of the default accelerator (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcOKyMAAoJEL/70l94x66DxKEH/1ho2Xl8ezxCecA6q3HqTgMT
NJ/ntdqQwVwekKOWzsywnM3/LkEDLH55MxbTeQ8M/Vb1seS8eROz24/gPTzvFrfR
n/d11rDV1EJfWe0H7nGLLFiRv0MSjxLpG9c3dlOKWhwOYHm25tr48PsdfVFP9Slz
BK3rwrMeDgArfptHAIsAXt2h1S0EzrG9pMwGDpErCDzziXxBhUESE0Iqfw8LsH1K
VjMn6rn7Ts1XKlxxwsm+BzHlTJghbj3tWPIfk+6uK2isP4iM3gFCoav3SG9XVXof
V9+vFyMxdtZKT/0HvajhUS4/1S/uGBNNchZRnCxXlpbueWc5ROtvarhM6Hb0eck=
=i8E5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* HAX support for Linux hosts (Alejandro)
* esp bugfixes (Guenter)
* Windows build cleanup (Marc-André)
* checkpatch logic improvements (Paolo)
* coalesced range bugfix (Paolo)
* switch testsuite to TAP (Paolo)
* QTAILQ rewrite (Paolo)
* block/iscsi.c cancellation fixes (Stefan)
* improve selection of the default accelerator (Thomas)
# gpg: Signature made Fri 11 Jan 2019 14:47:40 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (34 commits)
avoid TABs in files that only contain a few
remove space-tab sequences
scripts: add script to convert multiline comments into 4-line format
hw/watchdog/wdt_i6300esb: remove a unnecessary comment
checkpatch: warn about qemu/queue.h head structs that are not typedef-ed
qemu/queue.h: simplify reverse access to QTAILQ
qemu/queue.h: reimplement QTAILQ without pointer-to-pointers
qemu/queue.h: remove Q_TAILQ_{HEAD,ENTRY}
qemu/queue.h: typedef QTAILQ heads
qemu/queue.h: leave head structs anonymous unless necessary
vfio: make vfio_address_spaces static
qemu/queue.h: do not access tqe_prev directly
test: replace gtester with a TAP driver
test: execute g_test_run when tests are skipped
qga: drop < Vista compatibility
build-sys: build with Vista API by default
build-sys: move windows defines in osdep.h header
build-sys: don't include windows.h, osdep.h does it
scsi: esp: Defer command completion until previous interrupts have been handled
esp-pci: Fix status register write erase control
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are not many, and they are all simple mistakes that ended up
being committed. Remove them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The registered memory region of i6300esb is not suitable for coalesced
mmio, because a write for the region may trigger an immediate action
and can't be delayed.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Message-Id: <1544253511-82742-1-git-send-email-peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be needed when we change the QTAILQ head and elem structs
to unions. However, it is also consistent with the usage elsewhere
in QEMU for other list head structs (see for example FsMountList).
Note that most QTAILQs only need their name in order to do backwards
walks. Those do not break with the struct->union change, and anyway
the change will also remove the need to name heads when doing backwards
walks, so those are not touched here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is not used outside hw/vfio/common.c, so it does not need to
be extern.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest OS reads RSTAT, RSEQ, and RINTR, and expects those registers
to reflect a consistent state. However, it is possible that the registers
can change after RSTAT was read, but before RINTR is read, when
esp_command_complete() is called.
Guest OS qemu
-------- ----
[handle interrupt]
Read RSTAT
esp_command_complete()
RSTAT = STAT_ST
esp_dma_done()
RSTAT |= STAT_TC
RSEQ = 0
RINTR = INTR_BS
Read RSEQ
Read RINTR RINTR = 0
RSTAT &= ~STAT_TC
RSEQ = SEQ_CD
The guest OS would then try to handle INTR_BS combined with an old
value of RSTAT. This sometimes resulted in lost events, spurious
interrupts, guest OS confusion, and stalled SCSI operations.
A typical guest error log (observed with various versions of Linux)
looks as follows.
scsi host1: Spurious irq, sreg=13.
...
scsi host1: Aborting command [84531f10:2a]
scsi host1: Current command [f882eea8:35]
scsi host1: Queued command [84531f10:2a]
scsi host1: Active command [f882eea8:35]
scsi host1: Dumping command log
scsi host1: ent[15] CMD val[44] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[00] event[0c]
scsi host1: ent[16] CMD val[01] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c]
scsi host1: ent[17] CMD val[43] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c]
scsi host1: ent[18] EVENT val[0d] sreg[92] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c]
...
Defer handling command completion until previous interrupts have been
handled to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Per AM53C974 datasheet, definition of "SCSI Bus and Control (SBAC)"
register:
Bit 24 'STATUS' Write Erase Control
This bit controls the Write Erase feature on bits 3:1 and bit 6 of the DMA
Status Register ((B)+54h). When this bit is programmed to '1', the state
of bits 3:1 are preserved when read. Bits 3:1 are only cleared when a '1'
is written to the corresponding bit location. For example, to clear bit 1,
the value of '0000_0010b' should be written to the register. When the DMA
Status Preserve bit is '0', bits 3:1 are cleared when read.
The status register is currently defined to bit 12, not bit 24.
Also, its implementation is reversed: The status is auto-cleared if
the bit is set to 1, and must be cleared explicitly when the bit is
set to 0. This results in spurious interrupts reported by the Linux
kernel, and in some cases even results in stalled SCSI operations.
Set SBAC_STATUS to bit 24 and reverse the logic to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <1543442171-24863-1-git-send-email-linux@roeck-us.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
usb packets with no payload (zero length) seem to happen in practice for
whatever reason. Add a check and skip the packet then, otherwise we'll
trigger an assert.
Reported-by: Leonardo Soares Müller <leozinho29_eu@hotmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181211072649.20700-1-kraxel@redhat.com
This device does not use I2C, so no need to include the header file here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546614146-10525-1-git-send-email-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.
(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")
According to repology, all the distros that are build target platforms
for QEMU include it:
RHEL-7: 0.14.0
Debian (Stretch): 0.12.8
Debian (Jessie): 0.12.5
FreeBSD (ports): 0.14.0
OpenSUSE Leap 15: 0.14.0
Ubuntu (Xenial): 0.12.6
Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since commit ea9ce8934, device_post_init() applies globals directly
from machines and accelerator classes.
There are cases, such as -device scsi-hd,help, where the machine is
setup but there in no accelerator.
Let's skip accelerator globals in this case.
Fixes SEGV:
#0 0x0000555558ea04ff in object_get_class (obj=0x0) at /home/elmarco/src/qemu/build/../qom/object.c:857
#1 0x000055555854c797 in object_apply_compat_props (obj=0x616000078980) at /home/elmarco/src/qemu/build/../hw/core/qdev.c:978
#2 0x000055555854c797 in object_apply_compat_props (obj=0x616000078980) at /home/elmarco/src/qemu/build/../hw/core/qdev.c:973
#3 0x000055555854c959 in device_post_init (obj=0x616000078980) at /home/elmarco/src/qemu/build/../hw/core/qdev.c:989
#4 0x0000555558e9e250 in object_post_init_with_type (ti=<optimized out>, obj=0x616000078980) at /home/elmarco/src/qemu/build/../qom/object.c:365
#5 0x0000555558e9e250 in object_initialize_with_type (data=0x616000078980, size=616, type=<optimized out>) at /home/elmarco/src/qemu/build/../qom/object.c:425
#6 0x0000555558e9e571 in object_new_with_type (type=0x613000031900) at /home/elmarco/src/qemu/build/../qom/object.c:588
#7 0x000055555830c048 in qmp_device_list_properties (typename=typename@entry=0x60200000c2d0 "scsi-hd", errp=errp@entry=0x7fffffffc540) at /home/elmarco/src/qemu/qmp.c:519
#8 0x00005555582c4027 in qdev_device_help (opts=<optimized out>) at /home/elmarco/src/qemu/qdev-monitor.c:283
#9 0x0000555559378fa2 in qemu_opts_foreach (list=<optimized out>, func=func@entry=0x5555582cfca0 <device_help_func>, opaque=opaque@entry=0x0, errp=errp@entry=0x0) at /home/elmarco/src/qemu/util/qemu-option.c:1171
https://bugzilla.redhat.com/show_bug.cgi?id=1664364
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190109102311.7635-1-marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of verbose arrays with 4 lines for each entry, make each
entry take only one line. This makes long arrays that couldn't
fit in the screen become short and readable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190107193020.21744-4-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
stringify() is useful when we need to use macros in compat_props
(like when we set virtio-baloon-pci.class=PCI_CLASS_MEMORY_RAM at
pc_i440fx_1_0_machine_options()), but it is pointless when we are
already providing a number literal.
Replace stringify() with string literals when appropriate.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190107193020.21744-3-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The macro is only used in one place, where the purpose of the
value is obvious. Eliminate the macro so we don't need to rely
on stringify().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190107193020.21744-2-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's rewrite it properly using ranges. This fixes certain overflows that
are right now possible. E.g.
qemu-system-x86_64 -m 4G,slots=20,maxmem=40G -M pc \
-object memory-backend-file,id=mem1,share,mem-path=/dev/zero,size=2G
-device pc-dimm,memdev=mem1,id=dimm1,addr=-0x40000000
Now properly errors out instead of succeeding. (Note that qapi
parsing of huge uint64_t values is broken and fixes are on the way)
"can't add memory device [0xffffffffa0000000:0x80000000], usable range for
memory devices [0x140000000:0xe00000000]"
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181214131043.25071-3-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make them more QOMConventional.
Cc:qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190105023831.66910-1-liq3ea@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These files don't seem to do anything related to ISA directly, so
there is no need to include isa.h here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546615943-16274-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This device does not use I2C, so no need to include the header file here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546614146-10525-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Depending on the interrupt mode of the machine, enable or disable the
XIVE MMIOs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'dual' sPAPR IRQ backend supports both interrupt mode, XIVE
exploitation mode and the legacy compatibility mode (XICS). both modes
are not supported at the same time.
The machine starts with the legacy mode and a new interrupt mode can
then be negotiated by the CAS process. In this case, the new mode is
activated after a reset to take into account the required changes in
the machine. These impact the device tree layout, the interrupt
presenter object and the exposed MMIO regions in the case of XIVE.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The qemu_irq array is now allocated at the machine level using a sPAPR
IRQ set_irq handler depending on the chosen interrupt mode. The use of
this handler is slightly inefficient today but it will become necessary
when the 'dual' interrupt mode is introduced.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Future changes of the ICSState object will remove the qemu_irq array
from under the interrupt controller model. Prepare ground for the PSI
interrupt sources and introduce a new one directly under the PSI
device model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To support the 'dual' interrupt mode, XICS and XIVE, we plan to move
the qemu_irq array of each interrupt controller under the machine and
do the allocation under the sPAPR IRQ init method.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The error value can be squashed by the section handling radix migration.
Simply bail out if an error occurs when the RTC offset is imported.
This fixes the Coverity issue CID 1398591.
Fixes: d39c90f5f3 ("spapr: Fix migration of Radix guests")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that the 'intc' pointer is only used by the XICS interrupt mode,
let's make things clear and use a XICS type and name.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
which will be used by the machine only when the XIVE interrupt mode is
in use.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Today, the interrupt presenter is linked to a CPU using the
cpu_intc_create() method of the sPAPR IRQ backend. The resulting
object is assigned to the PowerPCCPU 'intc' pointer whatever the
interrupt mode, XICS or XIVE.
To support the 'dual' interrupt mode, we will need to distinguish
between the two presenter objects and for that, we plan to introduce a
second interrupt presenter object pointer under the PowerPCCPU. The
modifications below move the assignment of the presenter object under
the cpu_intc_create() method to prepare ground for the future changes.
Both sPAPR and PowerNV machines are impacted.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The qirq routines of the XiveSource and the sPAPRXive model are only
used under the sPAPR IRQ backend. Simplify the overall call stack and
gather all the code under spapr_qirq_xive(). It will ease future
changes.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PHB hotplug will bring more users for it. Let's define it along with
the PHB defines from which it is derived for simplicity.
While here fix a misleading comment about manual placement, which was
abandoned with 30b3bc5aa9.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds cleanup counterparts to pci_register_root_bus(),
pci_root_bus_new(), and pci_bus_irqs().
These cleanup routines are needed in the case of hotpluggable
PCIHostBridge implementations. Currently we can rely on the
object_unparent()'ing of the PCIHostState recursively unparenting
and cleaning up it's child buses, but we need explicit calls
to also:
1) remove the PCIHostState from pci_host_bridges global list.
otherwise, we risk accessing freed memory when we access
the list later
2) clean up memory allocated in pci_bus_irqs()
Both are handled outside the context of any particular bus or
host bridge's init/realize functions, making it difficult to
avoid the need for explicit cleanup functions without remodeling
how PCIHostBridges are created. So keep it simple and just add
them for now.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function is only used when creating the default PHB. Let's rename
it and move it to the core machine code for clarity.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Debug logs were left enabled in ppc4xx_devs.c whereas in other files
these are normally not enabled. Disable it here as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SLOF receives a device tree and updates it with various properties
before switching to the guest kernel and QEMU is not aware of any changes
made by SLOF. Since there is no real RTAS (QEMU implements it), it makes
sense to pass the SLOF final device tree to QEMU to let it implement
RTAS related tasks better, such as PCI host bus adapter hotplug.
Specifially, now QEMU can find out the actual XICS phandle (for PHB
hotplug) and the RTAS linux,rtas-entry/base properties (for firmware
assisted NMI - FWNMI).
This stores the initial DT blob in the sPAPR machine and replaces it
in the KVMPPC_H_UPDATE_DT (new private hypercall) handler.
This adds an @update_dt_enabled machine property to allow backward
migration.
SLOF already has a hypercall since
https://github.com/aik/SLOF/commit/e6fc84652c9c0073f9183
This makes use of the new fdt_check_full() helper. In order to allow
the configure script to pick the correct DTC version, this adjusts
the DTC presense test.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
H_HOME_NODE_ASSOCIATIVITY H-Call returns the associativity domain
designation associated with the identifier input parameter
This fixes a crash when we try to hotplug a CPU in memory-less and
CPU-less numa node. In this case, the kernel tries to online the
node, but without the information provided by this h-call, the node id,
it cannot and the CPU is started while the node is not onlined.
It also removes the warning message from the kernel:
VPHN is not supported. Disabling polling..
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function is only needed when Q35 is in use. Moving it to
the same file that uses it lets you disable the entire USB
subsystem in x86_64-softmmu.mak; of course doing that will
cause -usb to break horribly, but one thing at a time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1545064358-4601-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch introduces a new system bus generic EHCI controller.
For the system bus EHCI controller, we've already had "xlnx",
"exynos4210", "tegra2", "ppc4xx" and "fusbh200", they are specific and
only suitable for their own platforms, platforms such as an Arm server,
may need a generic system bus EHCI controller, this patch creates it,
and the kernel driver ehci_platform.c works well on it.
Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Message-id: 1546077657-22637-1-git-send-email-hongbo.zhang@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In usb_device_post_load, certain values of dev->setup_len or
dev->setup_index can cause -EINVAL to be returned. One example is when
setup_len exceeds 4096, the hard-coded value of sizeof(dev->data_buf).
This can happen through legitimate guest activity and will cause all
subsequent attempts to migrate the guest to fail in vmstate_load_state.
The values of these variables can be set by USB packets originating in
the guest. There are two ways in which they can be set: in
do_token_setup and in do_parameter in hw/usb/core.c.
It is easy to craft a USB packet in a guest that causes do_token_setup
to set setup_len to a value larger than 4096. When this has been done
once, all subsequent attempts to migrate the VM will fail in
usb_device_post_load until the VM is next power-cycled or a
smaller-sized USB packet is sent to the device.
Sample code for achieving this in a VM started with "-device usb-tablet"
running Linux with CONFIG_HIDRAW=y and HID_MAX_BUFFER_SIZE > 4096:
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
int main() {
char buf[4097];
int fd = open("/dev/hidraw0", O_RDWR|O_NONBLOCK);
buf[0] = 0x1;
write(fd, buf, 4097);
return 0;
}
When this code is run in the VM, qemu will output:
usb_generic_handle_packet: ctrl buffer too small (4097 > 4096)
A subsequent attempt to migrate the VM will fail and output the
following on the destination host:
qemu-kvm: error while loading state for instance 0x0 of device '0000:00:06.7/1/usb-ptr'
qemu-kvm: load of migration failed: Invalid argument
The idea behind checking the values of setup_len and setup_index before
they are used is correct, but doing it in usb_device_post_load feels
arbitrary, and will cause unnecessary migration failures. Indeed, none
of the commit messages for c60174e8, 9f8e9895 and 719ffe1f justify why
post_load is the right place to do these checks. They correctly point
out that the important thing to protect is the usb_packet_copy.
Instead, the right place to do the checks is in do_token_setup and
do_parameter. Indeed, there are already some checks here. We can examine
each of the disjuncts currently tested in usb_device_post_load to see
whether any need adding to do_token_setup or do_parameter to improve
safety there:
* dev->setup_index < 0
- This test is not needed because setup_index is explicitly set to
0 in do_token_setup and do_parameter.
* dev->setup_len < 0
- In both do_token_setup and do_parameter, the value of setup_len
is computed by (s->setup_buf[7] << 8) | s->setup_buf[6]. Since
s->setup_buf is a byte array and setup_len is an int32_t, it's
impossible for this arithmetic to set setup_len's top bit, so it can
never be negative.
* dev->setup_index > dev->setup_len
- Since setup_index is 0, this is equivalent to the previous test,
so is redundant.
* dev->setup_len > sizeof(dev->data_buf)
- This condition is already explicitly checked in both
do_token_setup and do_parameter.
Hence there is no need to bolster the existing checks in do_token_setup
or do_parameter, and we can safely remove these checks from
usb_device_post_load without reducing safety but allowing migrations to
proceed regardless of what USB packets have been generated by the guest.
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Message-Id: <20190107175117.23769-1-jonathan.davies@nutanix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The typhoon MemoryRegionOps callbacks directly call
cpu_unassigned_access(), presumably as the old-fashioned way
to provoke a CPU exception. This won't work since commit
6ad4d7eed0 when we switched Alpha over to the
transaction_failed hook API, because now cpu_unassigned_access()
is a no-op for Alpha.
Make the MemoryRegionOps callbacks use the read_with_attrs
and write_with_attrs hooks, so they can signal a failure
that should cause a CPU exception by returning MEMTX_ERROR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210173350.13073-1-peter.maydell@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=x1jv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190107' into staging
target-arm queue:
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
# gpg: Signature made Mon 07 Jan 2019 16:29:52 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190107: (37 commits)
Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.
hw/misc/tz-mpc: Fix value of BLK_MAX register
target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
arm: Add Clock peripheral stub to NRF51 SOC
tests/microbit-test: Add Tests for nRF51 Timer
arm: Instantiate NRF51 Timers
hw/timer/nrf51_timer: Add nRF51 Timer peripheral
tests/microbit-test: Add Tests for nRF51 GPIO
arm: Instantiate NRF51 general purpose I/O
hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
arm: Instantiate NRF51 random number generator
hw/misc/nrf51_rng: Add NRF51 random number generator peripheral
arm: Add header to host common definition for nRF51 SOC peripherals
qtest: Add set_irq_in command to set IRQ/GPIO level
hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
cpus.c: Fix race condition in cpu_stop_current()
MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/
hw/arm: versal: Plug memory leaks
Revert "armv7m: Guard against no -kernel argument"
arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
noload kernels are loaded with the u-boot image header and as a result
the header size needs adding to the entry point. Fake up a hdr so the
kernel image is loaded at the right address and the entry point is
adjusted appropriately.
The default location for the uboot file is 32MiB above bottom of DRAM.
This matches the recommendation in Documentation/arm/Booting.
Clarify the load_uimage API to state the passing of a load address when an
image doesn't specify one, or when loading a ramdisk is expected.
Adjust callers of load_uimage, etc.
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-id: 11488a08-1fe0-a278-2210-deb64731107f@gmx.co.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the TZ Memory Protection Controller, the BLK_MAX register is supposed
to return the maximum permitted value of the BLK_IDX register. Our
implementation incorrectly returned max+1 (ie the total number of
valid index values, since BLK_IDX is zero-based).
Correct this off-by-one error. Since we consistently initialize
and use s->blk_max throughout the implementation as the 'size'
of the LUT, just adjust the value we return when the guest reads
the BLK_MAX register, rather than trying to change the semantics
of the s->blk_max internal struct field.
Fixes: https://bugs.launchpad.net/qemu/+bug/1806824
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181213183249.3468-1-peter.maydell@linaro.org
This stubs enables the microbit-micropython firmware to run
on the microbit machine.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-12-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the model for the nRF51 timer peripheral.
Currently, only the TIMER mode is implemented.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-9-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a model of the nRF51 GPIO peripheral.
Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations.
The pins can be used as input pins with pull-ups or pull-down.
Furthermore, three different output driver modes per level are
available (disconnected, standard, high-current).
The GPIO-Peripheral has a mechanism for detecting level changes which is
not featured in this model.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use RNG in SOC.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-5-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the NRF51 random number generator peripheral.
This is a simple random generator that continuously generates
new random values after startup.
Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-4-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds a header that provides definitions that are used
across nRF51 peripherals
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
From the "A10 User Manual V1.20" p.29: "3.2. Memory Mapping" and:
7. System Control
7.1. Overview
A10 embeds a high-speed SRAM which has been split into five segments.
See detailed memory mapping in following table:
Area Address Size (Bytes)
A1 0x00000000-0x00003FFF 16K
A2 0x00004000-0x00007FFF 16K
A3 0x00008000-0x0000B3FF 13K
A4 0x0000B400-0x0000BFFF 3K
Since for emulation purpose we don't need the segmentations, we simply define
the 'A' area as a single 48KB SRAM.
We don't implement the following others areas:
- 'B': 'Secure RAM' (64K),
- 'C': Debug/ISP SRAM
- 'D': USB SRAM
(qemu) info mtree
address-space: memory
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-000000000000bfff (prio 0, ram): sram A
0000000001c00000-0000000001c00fff (prio -1000, i/o): a10-sram-ctrl
0000000001c0b000-0000000001c0bfff (prio 0, i/o): aw_emac
0000000001c18000-0000000001c18fff (prio 0, i/o): ahci
0000000001c18080-0000000001c180ff (prio 0, i/o): allwinner-ahci
0000000001c20400-0000000001c207ff (prio 0, i/o): allwinner-a10-pic
0000000001c20c00-0000000001c20fff (prio 0, i/o): allwinner-A10-timer
0000000001c28000-0000000001c2801f (prio 0, i/o): serial
0000000040000000-0000000047ffffff (prio 0, ram): cubieboard.ram
Reported-by: Charlie Smurthwaite <charlie@atech.media>
Tested-by: Charlie Smurthwaite <charlie@atech.media>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20190104142921.878-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Plug a couple of "board creation time" memory leaks.
Fixes: 6f16da53ff ("hw/arm: versal: Add a virtual Xilinx Versal board")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190104104749.5314-2-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 01fd41ab3f.
The generic loader device (-device loader,file=kernel.bin) can be used
to load a kernel instead of the -kernel option. Some boards have flash
memory (pflash) that is set via the -pflash or -drive options.
Allow starting QEMU without the -kernel option to accommodate these
scenarios.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103144124.18917-1-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create two separate CPU clusters for APUs and RPUs.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-17-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds the cpu-cluster type. It aims at gathering CPUs from
the same cluster in a machine.
For now it only has a `cluster-id` property.
Documentation in cluster.h written with the help of Peter Maydell.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-2-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In previous commit:
commit 7dea29e4af
Author: Li Qiang <liq3ea@gmail.com>
Date: Fri Oct 19 03:50:36 2018 -0700
hw: ccid-card-emulated: cleanup resource when realize in error path
The emulated_realize method was changed so that it jumps to a cleanup
label to de-initialize state upon error. This change failed to ensure
the success path exited the method before this point though. So the
mutexes are always destroyed even in normal operation. The result is
as crashtastic as expected:
$ qemu-system-x86_64 -usb -device usb-ccid,id=ccid0 -device ccid-card-emulated,backend=nss-emulated,id=smartcard0,bus=ccid0.0
qemu-system-x86_64: util/qemu-thread-posix.c:64: qemu_mutex_lock_impl: Assertion `mutex->initialized' failed.
Aborted (core dumped)
Fixes: 7dea29e4af
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181221134115.27973-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
hostmem-file and hostmem-memfd use the whole object path for the
memory region name, and hostname-ram uses only the path component (the
object id, or canonical path basename):
qemu -m 1024 -object memory-backend-file,id=mem,size=1G,mem-path=/tmp/foo -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000
qemu -m 1024 -object memory-backend-memfd,id=mem,size=1G -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000
qemu -m 1024 -object memory-backend-ram,id=mem,size=1G -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
Block Name PSize Offset Used Total
mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000
For consistency, change to use object id for -file and -memfd as well
with >= 4.0.
Having a consistent naming allows to migrate to different hostmem
backends.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
It's now possible to use the common function.
Teach object_apply_global_props() to warn if Error argument is NULL.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
All qdev_prop_register_global() set &error_fatal for errp, except
'-rtc driftfix=slew', which arguably should also use &error_fatal, as
otherwise failing to apply the property would only report a warning.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
A step towards being able to call a common function,
object_apply_global_props().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
All globals are now either provided via -global or through -cpu
features (CPU features are implemented by registering globals).
If the global isn't being used, it should warn in either case.
We can thus consider that all global_props are "user-provided"
globals. No need to track this per-globals anymore.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
This will allow to apply compat properties on other objects than QDev easily.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Use static arrays instead. I decided to rename the conflicting
pc_compat_2_1() function with pc_compat_2_1_fn().
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Use static arrays instead. I decided to rename the conflicting
pc_compat_2_1() function with pc_compat_2_1_fn().
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Use static arrays instead. I decided to rename the conflicting
pc_compat_2_2() function with pc_compat_2_2_fn().
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Use static arrays instead. I decided to rename the conflicting
pc_compat_2_3() function with pc_compat_2_3_fn().
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
