- Null pointer dereference in IPI IOCSR (Jiaxun)
- Correct '-smbios type=4' in man page (Heinrich)
- Use correct MMU index in MIPS get_pte (Phil)
- Reset MPQEMU remote message using device_cold_reset (Peter)
- Update linux-user MIPS CPU list (Phil)
- Do not let exec_command read console if no pattern to wait for (Nick)
- Remove shadowed declaration warning (Pierrick)
- Restrict STQF opcode to SPARC V9 (Richard)
- Add missing Kconfig dependency for POWERNV ISA serial port (Bernhard)
- Do not allow vmport device without i8042 PS/2 controller (Kamil)
- Fix QCryptoTLSCredsPSK leak (Peter)
-----BEGIN PGP SIGNATURE-----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=lPMG
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240820' of https://github.com/philmd/qemu into staging
Various fixes
- Null pointer dereference in IPI IOCSR (Jiaxun)
- Correct '-smbios type=4' in man page (Heinrich)
- Use correct MMU index in MIPS get_pte (Phil)
- Reset MPQEMU remote message using device_cold_reset (Peter)
- Update linux-user MIPS CPU list (Phil)
- Do not let exec_command read console if no pattern to wait for (Nick)
- Remove shadowed declaration warning (Pierrick)
- Restrict STQF opcode to SPARC V9 (Richard)
- Add missing Kconfig dependency for POWERNV ISA serial port (Bernhard)
- Do not allow vmport device without i8042 PS/2 controller (Kamil)
- Fix QCryptoTLSCredsPSK leak (Peter)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmbDzAsACgkQ4+MsLN6t
# wN7SvBAAwM0Frtg4ZKDZQu8XgMjLq1xVoSWjC3YJZKTpyGap5gO+7StvHg0sf9iB
# YyGqocCO+qdj9a7pTSasfGDyufpwoIZkOqkwGUWKBos76cOcHWt4e/gkl9O65Lf1
# VVKX4/xdY+a5w2eVAAdWWrYdaPWkKLm0ZZXKoeSIvN4R9A41j7J4kANhE2SweczF
# NnTt2gBnSlpRzghlVWPJKhnq+aYbvLeR7ApdNGUJDpSI1ZTh9gH1GtZFwBN7aeDo
# PvDucoui0EmuyHTVdOYOH3zihTfzKlNZECcT3Y6/6i8y5p7jLHyINHHexsKw6T56
# i5RidJMPTfM0EO6LU1GvUN5FzZy24zXOf298Fe/GMYczQsOznQd4+aFHYPb3d4hZ
# 8Vc1wB1s8XF5WGj+7bchBAUdynUnbwUqfMOb2pMXLIm21pSDnOTVgmYMnp1Kt4AA
# 9WbHiS6tUJf/HjQsep8BBNGUiVSsUPDNNhL8QN43u2C0NgNRPgtRuIV+ytgVXS1G
# 2t1QiRX0lX4ACHmw88agUCU3OhorumuDOpoitQK5jn2VutT7TqbGgibkQMFSgn9E
# Xwrmtlf7nYU9MVgXYJjH2bBh7wbOmQCqbHniEj0targkxccAMJoswG4vtKsP9zkd
# tBs6qMiZ8qSj5eoq8JBRF8bF4tONmboPZjRlboACJ0kTD5wCElA=
# =lPMG
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Aug 2024 08:49:47 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240820' of https://github.com/philmd/qemu:
crypto/tlscredspsk: Free username on finalize
hw/i386/pc: Ensure vmport prerequisites are fulfilled
hw/i386/pc: Unify vmport=auto handling
hw/ppc/Kconfig: Add missing SERIAL_ISA dependency to POWERNV machine
target/sparc: Restrict STQF to sparcv9
contrib/plugins/execlog: Fix shadowed declaration warning
tests/avocado: Mark ppc_hv_tests.py as non-flaky after fixed console interaction
tests/avocado: exec_command should not consume console output
linux-user/mips: Select Loongson CPU for Loongson binaries
linux-user/mips: Select MIPS64R2-generic for Rel2 binaries
linux-user/mips: Select Octeon68XX CPU for Octeon binaries
linux-user/mips: Do not try to use removed R5900 CPU
hw/remote/message.c: Don't directly invoke DeviceClass:reset
hw/dma/xilinx_axidma: Use semicolon at end of statement, not comma
target/mips: Load PTE as DATA
target/mips: Use correct MMU index in get_pte()
target/mips: Pass page table entry size as MemOp to get_pte()
qemu-options.hx: correct formatting -smbios type=4
hw/mips/loongson3_virt: Fix condition of IPI IOCSR connection
hw/mips/loongson3_virt: Store core_iocsr into LoongsonMachineState
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that exec_command doesn't incorrectly consume console output,
and guest time is set correctly, ppc_hv_tests.py is working more
reliably. Try marking it non-flaky.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20240805232814.267843-3-npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
_console_interaction reads data from the console even when there is only
an input string to send, and no output data to wait on. This can cause
lines to be missed by wait_for_console_pattern calls that follows an
exec_command. Fix this by not reading the console if there is no pattern
to wait for.
This solves occasional hangs in ppc_hv_tests.py, usually when run on KVM
hosts that are fast enough to output important lines quickly enough to be
consumed by exec_command, so they get missed by subsequent wait for
pattern calls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240805232814.267843-2-npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The x86-64 pc machine is flaky with record/replay, but q35 is more
stable. Add a q35 test to replay_kernel.py.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-7-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-15-alex.bennee@linaro.org>
This runs replay-dump.py after recording a trace, and fails the test if
the script fails.
replay-dump.py is modified to exit with non-zero if an error is
encountered while parsing, to support this.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
gitlab with this change
v5: Update timeout to 180s because x86 was just exceeding 120s in
Message-Id: <20240813050638.446172-4-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-12-alex.bennee@linaro.org>
We disabled all RX tests on commit 9b45cc9931 ("docs/devel:
rationalise unstable gitlab tests under FLAKY_TESTS") for
being flaky. However I don't recall the U-Boot test to fail
(the problematic line checking the 'version' string is already
commented out), and I'm running this test reliably, so re-enable
it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20240801172332.65701-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-2-alex.bennee@linaro.org>
Refresh with the newly added gtk-vnc package
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240718094159.902024-3-berrange@redhat.com>
[thuth: fixed conflicts in .gitlab-ci.d/cirrus/*.vars]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The gtk-vnc package is used by the vnc-display-test qtest
program. Technically only gvnc is needed, but since we
already pull in the gtk3 dep, it is harmless to depend
on gtk-vnc.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240718094159.902024-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 9b45cc993 added many cases of skipUnless for the sake of
organizing flaky tests. But, Python decorators *must* follow what
they decorate, so the newlines added should *not* exist there.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-ID: <20240806173119.582857-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The real period is zero when both period and period_frac are zero.
Check the method ptimer_set_freq, if freq is larger than 1000 MHz,
the period is zero, but the period_frac is not, in this case, the
ptimer will work but the current code incorrectly recognizes that
the ptimer is disabled.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2306
Signed-off-by: JianZhou Yue <JianZhou.Yue@verisilicon.com>
Message-id: 3DA024AEA8B57545AF1B3CAA37077D0FB75E82C8@SHASXM03.verisilicon.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The implementation for these instructions handles -0 as an invalid float
point value, whereas the Hexagon hardware considers it the same as +0
(which is valid). Let's fix that and add a regression test.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Apparently 'qemu-img info' doesn't report the backing file format field
for qed (as it does for qcow2):
$ qemu-img create -f qed base.qed 1M && qemu-img create -f qed -b base.qed -F qed top.qed 1M
$ qemu-img create -f qcow2 base.qcow2 1M && qemu-img create -f qcow2 -b base.qcow2 -F qcow2 top.qcow2 1M
$ qemu-img info top.qed | grep 'backing file format'
$ qemu-img info top.qcow2 | grep 'backing file format'
backing file format: qcow2
This leads to the 024 test failure with -qed. Let's just filter the
field out and exclude it from the output.
This is a fixup for the commit f93e65ee51 ("iotests/{024, 271}: add
testcases for qemu-img rebase").
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20240730094701.790624-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added several tests to verify the implementation of the vvfat driver.
We needed a way to interact with it, so created a basic `fat16.py` driver
that handled writing correct sectors for us.
Added `vvfat` to the non-generic formats, as its not a normal image format.
Signed-off-by: Amjad Alsharafi <amjadsharafi10@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <bb8149c945301aefbdf470a0924c07f69f9c087d.1721470238.git.amjadsharafi10@gmail.com>
[kwolf: Made mypy and pylint happy to unbreak 297]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The asset used in the mentioned test gets truncated before it's used
in the test. This means that the file gets modified, and thus the
asset's expected hash doesn't match anymore. This causes cache misses
and re-downloads every time the test is re-run.
Let's make a copy of the asset so that the one in the cache is
preserved and the cache sees a hit on re-runs.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240726134438.14720-9-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Avocado's fetchasset plugin runs before the actual Avocado job (and
any test). It analyses the test's code looking for occurrences of
"self.fetch_asset()" in the either the actual test or setUp() method.
It's not able to fully analyze all code, though.
The way these tests are written, make the fetchasset plugin blind to
the assets. This adds some more code duplication, true, but it will
aid the fetchasset plugin to download or verify the existence of these
assets in advance.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240726134438.14720-3-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The SSL certificate installed at mipsdistros.mips.com has expired:
0 s:CN = mipsdistros.mips.com
i:C = US, O = Amazon, OU = Server CA 1B, CN = Amazon
a:PKEY: rsaEncryption, 2048 (bit); sigalg: RSA-SHA256
v:NotBefore: Dec 23 00:00:00 2019 GMT; NotAfter: Jan 23 12:00:00 2021 GMT
Because this project has no control over that certificate and host,
this falls back to plain HTTP instead. The integrity of the
downloaded files can be guaranteed by the existing hashes for those
files (which are not modified here).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240726134438.14720-2-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
You cannot use plugins without TCG enabled so it doesn't make sense to
have them separated off in the test directory structure. While we are
at it rename the directory to plugins to reflect the plural nature of
the directory and match up with contrib/plugins.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-10-alex.bennee@linaro.org>
Since 4f8d886085 (tests/plugin/mem: migrate to new per_vcpu API) this
test was skipping due to not being able to run callback and inline
memory instrumentation at the same time.
However b480f7a621 (tests/plugin: add test plugin for inline
operations) tests for all this matching up so we don't need the
additional complexity in avocado.
Remove the test.
Fixes: 4f8d886085
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-9-alex.bennee@linaro.org>
Update the document with details about the layout of tests. Remove the
out of date cris comments. Refer to the developer guide for details
about how to run the tests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-6-alex.bennee@linaro.org>
Recent debian cross-linker for loongarch issues
ld: warning: hello has a LOAD segment with RWX permissions
This is partially related to tests/tcg/loongarch64/system/kernel.ld,
but is not fixed by explicitly adding a single LOAD PHDR.
Disable the warning, since it does not apply to kernel images.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240724010733.22129-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-5-alex.bennee@linaro.org>
Add the --noexecstack assembler command-line option to avoid:
/usr/bin/ld: warning: boot.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
which is enabled by default with current debian cross toolchains.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240724010733.22129-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-4-alex.bennee@linaro.org>
The lcitool created containers save the full distro package list
details into /packages.txt. The idea is that build jobs will 'cat'
this file, so that the build log has a record of what packages
were used. This is important info, because when it comes to debug
failures, the original container is often lost.
This extends the manually written dockerfiles to also create the
/packages.txt file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240724095505.33544-2-berrange@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-2-alex.bennee@linaro.org>
In this commit Write a qtest pnv-spi-seeprom-test to check the
SPI transactions between spi controller and seeprom device.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power10 DD1.0 was dropped in:
commit 8f054d9ee8 ("ppc: Drop support for POWER9 and POWER10 DD1 chips")
Use the newer Power10 DD2 chips cfam id.
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In Gitlab CI, some ppc64 multi-threaded tcg tests crash when run in the
clang-user job with an assertion failure in glibc that seems to
indicate corruption:
signals: allocatestack.c:223: allocate_stack:
Assertion `powerof2 (pagesize_m1 + 1)' failed.
Disable these tests for now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
GNUTLS doesn't know how to perform I/O on anything other than plain
FDs, so the TLS session provides it with some I/O callbacks. The
GNUTLS API design requires these callbacks to return a unix errno
value, which means we're currently loosing the useful QEMU "Error"
object.
This changes the I/O callbacks in QEMU to stash the "Error" object
in the QCryptoTLSSession class, and fetch it when seeing an I/O
error returned from GNUTLS, thus preserving useful error messages.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
pkix_asn1_tab[] is only accessed by crypto-tls-x509-helpers.c,
rename pkix_asn1_tab.c as pkix_asn1_tab.c.inc and include it once.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[berrange: updated MAINTAINERS for changed filename]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
crypto-tls-psk-helpers.c doesn't access the declarations
of "crypto-tls-x509-helpers.h", remove the include line
to avoid when building with GNUTLS but without Libtasn1:
In file included from tests/unit/crypto-tls-psk-helpers.c:23:
tests/unit/crypto-tls-x509-helpers.h:26:10: fatal error:
libtasn1.h: No such file or directory
26 | #include <libtasn1.h>
| ^~~~~~~~~~~~
compilation terminated.
Fixes: e1a6dc91dd ("crypto: Implement TLS Pre-Shared Keys (PSK).")
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
=k8e9
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features,fixes
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
# zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
# yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
# wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
# VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
# M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
# =k8e9
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 10:16:31 AM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (61 commits)
hw/nvme: Add SPDM over DOE support
backends: Initial support for SPDM socket support
hw/pci: Add all Data Object Types defined in PCIe r6.0
tests/acpi: Add expected ACPI AML files for RISC-V
tests/qtest/bios-tables-test.c: Enable basic testing for RISC-V
tests/acpi: Add empty ACPI data files for RISC-V
tests/qtest/bios-tables-test.c: Remove the fall back path
tests/acpi: update expected DSDT blob for aarch64 and microvm
acpi/gpex: Create PCI link devices outside PCI root bridge
tests/acpi: Allow DSDT acpi table changes for aarch64
hw/riscv/virt-acpi-build.c: Update the HID of RISC-V UART
hw/riscv/virt-acpi-build.c: Add namespace devices for PLIC and APLIC
virtio-iommu: Add trace point on virtio_iommu_detach_endpoint_from_domain
hw/vfio/common: Add vfio_listener_region_del_iommu trace event
virtio-iommu: Remove the end point on detach
virtio-iommu: Free [host_]resv_ranges on unset_iommu_devices
virtio-iommu: Remove probe_done
Revert "virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged"
gdbstub: Add helper function to unregister GDB register space
physmem: Add helper function to destroy CPU AddressSpace
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As per the step 5 in the process documented in bios-tables-test.c,
generate the expected ACPI AML data files for RISC-V using the
rebuild-expected-aml.sh script and update the
bios-tables-test-allowed-diff.h.
These are all new files being added for the first time. Hence, iASL diff
output is not added.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-10-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add basic ACPI table test case for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-9-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per process documented (steps 1-3) in bios-tables-test.c, add empty
AML data files for RISC-V ACPI tables and add the entries in
bios-tables-test-allowed-diff.h.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-8-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The expected ACPI AML files are moved now under ${arch}/{machine} path.
Hence, there is no need to search in old path which didn't have ${arch}.
Remove the code which searches for the expected AML files under old path
as well.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-7-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After PCI link devices are moved out of the scope of PCI root complex,
the DSDT files of machines which use GPEX, will change. So, update the
expected AML files with these changes for these machines.
Mainly, there are 2 changes.
1) Since the link devices are created now directly under _SB for all PCI
root bridges in the system, they should have unique names. So, instead
of GSIx, named those devices as LXXY where L means link, XX will have
PCI bus number and Y will have the INTx number (ex: L000 or L001). The
_PRT entries will also be updated to reflect this name change.
2) PCI link devices are moved from the scope of each PCI root bridge to
directly under _SB.
Below is the sample iASL difference for one such link device.
Scope (\_SB)
{
Name (_HID, "LNRO0005") // _HID: Hardware ID
Name (_UID, 0x1F) // _UID: Unique ID
Name (_CCA, One) // _CCA: Cache Coherency Attribute
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
Memory32Fixed (ReadWrite,
0x0A003E00, // Address Base
0x00000200, // Address Length
)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x0000004F,
}
})
+ Device (L000)
+ {
+ Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */)
+ Name (_UID, Zero) // _UID: Unique ID
+ Name (_PRS, ResourceTemplate ()
+ {
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+ {
+ 0x00000023,
+ }
+ })
+ Name (_CRS, ResourceTemplate ()
+ {
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+ {
+ 0x00000023,
+ }
+ })
+ Method (_SRS, 1, NotSerialized) // _SRS: Set Resource Settings
+ {
+ }
+ }
+
Device (PCI0)
{
Name (_HID, "PNP0A08" /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, "PNP0A03" /* PCI Bus */) // _CID: Compatible ID
Name (_SEG, Zero) // _SEG: PCI Segment
Name (_BBN, Zero) // _BBN: BIOS Bus Number
Name (_UID, Zero) // _UID: Unique ID
Name (_STR, Unicode ("PCIe 0 Device")) // _STR: Description String
Name (_CCA, One) // _CCA: Cache Coherency Attribute
Name (_PRT, Package (0x80) // _PRT: PCI Routing Table
{
Package (0x04)
{
0xFFFF,
Zero,
- GSI0,
+ L000,
Zero
},
.....
})
Device (GSI0)
{
Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */)
Name (_UID, Zero) // _UID: Unique ID
Name (_PRS, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000023,
}
})
Name (_CRS, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000023,
}
})
Method (_SRS, 1, NotSerialized) // _SRS: Set Resource Settings
{
}
}
}
}
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Message-Id: <20240716144306.2432257-6-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
so that CI tests don't fail when those ACPI tables are updated in the
next patch. This is as per the documentation in bios-tables-tests.c.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-4-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CI often fails 'cross-i686-tci' job due to runner slowness
Log shows that test almost complete, with a few remaining
when bios-tables-test timeout hits:
19/270 qemu:qtest+qtest-aarch64 / qtest-aarch64/bios-tables-test
TIMEOUT 610.02s killed by signal 15 SIGTERM
...
stderr:
TAP parsing error: Too few tests run (expected 8, got 7)
At the same time overall job running time is only ~30 out of 1hr allowed.
Increase bios-tables-test instance timeout on 5min as a fix
for slow CI runners.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20240716125930.620861-1-imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
use ranges_overlap() instead of open-coding the overlap check to improve
the readability of the code.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-ID: <20240722040742.11513-8-yaoxt.fnst@fujitsu.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On some runners, test_arm_ast2600_evb_buildroot_tpm can take longer
than 90s to complete. Increase timeout for these.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240722085547.90650-1-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtiofs_submounts test has been removed in commit 5da7701e2a
("virtiofsd: Remove test"), so we don't need this files anymore.
Message-ID: <20240718173125.489901-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "signal" module is not used here, so we can remove this import
statement.
Message-ID: <20240719095408.33298-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Only some few tests are using the LinuxTest class. Move the related
code into a separate file so that this does not pollute the main
namespace.
Message-ID: <20240719095031.32814-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'app' level logging is useful, but sometimes we want
more, for example QEMU leverages the 'console' logging.
Allow overwriting AVOCADO_SHOW from environment, i.e.:
$ make check-avocado AVOCADO_SHOW='app,console'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240719180211.48073-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Python 3.12 warns:
TEST gdbstub MTE support on aarch64
/home/rth/qemu/src/tests/tcg/aarch64/gdbstub/test-mte.py:21: SyntaxWarning: invalid escape sequence '\('
PATTERN_0 = "Memory tags for address 0x[0-9a-f]+ match \(0x[0-9a-f]+\)."
Double up the \ to pass one through to the pattern.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240719004143.1319260-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Using bare printf's in plugins is perfectly acceptable but they do
rather mess up the output of "make check-tcg". Convert the printfs to
use g_string and then output with the plugin output helper which will
already be captured to .pout files by the test harness.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-7-alex.bennee@linaro.org>
The test has been marked as broken more than 4 years ago, and
so far nobody ever cared to fix it. Thus let's simply remove it
now ... if somebody ever needs it again, they can restore the
file from an older version of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Clément Chigot <chigot@adacore.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240710111755.60584-1-thuth@redhat.com>
[AJB: fix MAINTAINERS]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-3-alex.bennee@linaro.org>
This brings in the latest python mappings for the BSD updates.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-2-alex.bennee@linaro.org>
Rather than defining a single use variable, let's just use the class
attribute directly.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208190911.102879-11-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Because all tests share the same tags, it's possible to have all of
them at the class level.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208190911.102879-10-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While it's a good practice to have reusable base classes, in this
specific case there's no other user of the BootXenBase class.
By unifying the class used in this test, we can improve readability
and have the opportunity to add some future improvements in a clearer
fashion.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-ID: <20231208190911.102879-9-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-4-richard.henderson@linaro.org
Message-Id: 172090222034.13953.16888708708822922098-1@git.sr.ht
[rth: Split test from a larger patch, tidy assembly]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test has been marked as broken more than 4 years ago [*],
and so far nobody ever cared to fix it. Thus let's simply remove
it now ... if somebody ever needs it again, they can restore the
file from an older version of QEMU.
[*] https://lore.kernel.org/qemu-devel/4bbe9ff8-e1a8-917d-5a57-ce5185da19fa@redhat.com/
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: add reference as suggested by philm)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fully eliminate the "Example" sections in QAPI doc blocks now that they
have all been converted to arbitrary rST syntax using the
".. qmp-example::" directive. Update tests to match.
Migrating to the new syntax
---------------------------
The old "Example:" or "Examples:" section syntax is now caught as an
error, but "Example::" is stil permitted as explicit rST syntax for an
un-lexed, generic preformatted text block.
('Example' is not special in this case, any sentence that ends with "::"
will start an indented code block in rST.)
Arbitrary rST for Examples is now possible, but it's strongly
recommended that documentation authors use the ".. qmp-example::"
directive for consistent visual formatting in rendered HTML docs. The
":title:" directive option may be used to add extra information into the
title bar for the example. The ":annotated:" option can be used to write
arbitrary rST instead, with nested "::" blocks applying QMP formatting
where desired.
Other choices available are ".. code-block:: QMP" which will not create
an "Example:" box, or the short-form "::" code-block syntax which will
not apply QMP highlighting when used outside of the qmp-example
directive.
Why?
----
This patch has several benefits:
1. Example sections can now be written more arbitrarily, mixing
explanatory paragraphs and code blocks however desired.
2. Example sections can now use fully arbitrary rST.
3. All code blocks are now lexed and validated as QMP; increasing
usability of the docs and ensuring validity of example snippets.
(To some extent - This patch only gaurantees it lexes correctly, not
that it's valid under the JSON or QMP grammars. It will catch most
small mistakes, however.)
4. Each qmp-example can be titled or annotated independently without
bypassing the QMP lexer/validator.
(i.e. code blocks are now for *code* only, so we don't have to
sacrifice exposition for having lexically valid examples.)
NOTE: As with the "Notes" conversion (d461c27973), this patch (and the
three preceding) may change the rendering order for Examples in
the current generator. The forthcoming qapidoc rewrite will fix
this by always generating documentation in source order.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240717021312.606116-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Python 3.13 is in beta and Fedora 41 is preparing to make it the default
system interpreter; enable testing for it.
(In the event problems develop prior to release, it should only impact
the check-python-tox job, which is not run by default and is allowed to
fail.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240626232230.408004-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Python 3.13 isn't out yet, but it's in beta and Fedora is ramping up to
make it the default system interpreter for Fedora 41.
They moved our cheese for where ContextManager lives; add a conditional
to locate it while we support both pre-3.9 and 3.13+.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20240626232230.408004-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When opening an image with discard=off, we punch hole in the image when
writing zeroes, making the image sparse. This breaks users that want to
ensure that writes cannot fail with ENOSPACE by using fully allocated
images[1].
bdrv_co_pwrite_zeroes() correctly disables BDRV_REQ_MAY_UNMAP if we
opened the child without discard=unmap or discard=on. But we don't go
through this function when accessing the top node. Move the check down
to bdrv_co_do_pwrite_zeroes() which seems to be used in all code paths.
This change implements the documented behavior, punching holes only when
opening the image with discard=on or discard=unmap. This may not be the
best default but can improve it later.
The test depends on a file system supporting discard, deallocating the
entire file when punching hole with the length of the entire file.
Tested with xfs, ext4, and tmpfs.
[1] https://lists.nongnu.org/archive/html/qemu-discuss/2024-06/msg00003.html
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20240628202058.1964986-3-nsoffer@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The test works since we punch holes by default even when opening the
image without discard=on or discard=unmap. Fix the test to enable
discard.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Update test case to test network connection via SSH.
Test command:
```
cd build
pyvenv/bin/avocado run ../qemu/tests/avocado/machine_aspeed.py:AST2x00MachineSDK.test_aarch64_ast2700_evb_sdk_v09_02
```
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Update test case to test ASPEED OpenBMC SDK v09.02 for AST2700.
ASPEED fixed TX mask issue from linux/drivers/ftgmac100.c.
It is required to use ASPEED OpenBMC SDK since v09.02
for AST2700 QEMU network testing.
A test image is downloaded from the ASPEED Forked OpenBMC GitHub
release repository :
https://github.com/AspeedTech-BMC/openbmc/releases/
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The double-colon synax is rST formatting that precedes a literal code
block. We do not want to capture these as QAPI-specific sections.
Coerce blocks that start with e.g. "Example::" to be parsed as untagged
paragraphs instead of special tagged sections.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240626222128.406106-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Indentation tweaked for consistency]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We do not need a dedicated section for notes. By eliminating a specially
parsed section, these notes can be treated as normal rST paragraphs in
the new QMP reference manual, and can be placed and styled much more
flexibly.
Convert all existing "Note" and "Notes" sections to pure rST. As part of
the conversion, capitalize the first letter of each sentence and add
trailing punctuation where appropriate to ensure notes look sensible and
consistent in rendered HTML documentation. Markup is also re-aligned to
the de-facto standard of 3 spaces for directives.
Update docs/devel/qapi-code-gen.rst to reflect the new paradigm, and
update the QAPI parser to prohibit "Note" sections while suggesting a
new syntax. The exact formatting to use is a matter of taste, but a good
candidate is simply:
.. note:: lorem ipsum ...
... dolor sit amet ...
... consectetur adipiscing elit ...
... but there are other choices, too. The Sphinx readthedocs theme
offers theming for the following forms (capitalization unimportant); all
are adorned with a (!) symbol () in the title bar for rendered HTML
docs.
See
https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/demo.html#admonitions
for examples of each directive/admonition in use.
These are rendered in orange:
.. Attention:: ...
.. Caution:: ...
.. WARNING:: ...
These are rendered in red:
.. DANGER:: ...
.. Error:: ...
These are rendered in green:
.. Hint:: ...
.. Important:: ...
.. Tip:: ...
These are rendered in blue:
.. Note:: ...
.. admonition:: custom title
admonition body text
This patch uses ".. note::" almost everywhere, with just two "caution"
directives. Several instances of "Notes:" have been converted to
merely ".. note::", or multiple ".. note::" where appropriate.
".. admonition:: notes" is used in a few places where we had an
ordered list of multiple notes that would not make sense as
standalone/separate admonitions. Two "Note:" following "Example:"
have been turned into ordinary paragraphs within the example.
NOTE: Because qapidoc.py does not attempt to preserve source ordering of
sections, the conversion of Notes from a "tagged section" to an
"untagged section" means that rendering order for some notes *may
change* as a result of this patch. The forthcoming qapidoc.py rewrite
strictly preserves source ordering in the rendered documentation, so
this issue will be rectified in the new generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json]
Message-ID: <20240626222128.406106-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message clarified slightly, period added to one more note]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If a comment immediately follows a doc block, the parser doesn't ignore
that token appropriately. Fix that.
e.g.
> ##
> # = Hello World!
> ##
>
> # I'm a comment!
will break the parser, because it does not properly ignore the comment
token if it immediately follows a doc block.
Fixes: 3d035cd2cc (qapi: Rewrite doc comment parser)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-7-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Change get_doc_indented() to preserve indentation on all subsequent text
lines, and create a compatibility dedent() function for qapidoc.py that
removes indentation the same way get_doc_indented() did.
This is being done for the benefit of a new qapidoc generator which
requires that indentation in argument and features sections are
preserved.
Prior to this patch, a section like this:
```
@name: lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
would have its body text be parsed into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
We want to preserve the indentation for even the first body line so that
the entire block can be parsed directly as rST. This patch would now
parse that segment into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
This is helpful for formatting arguments and features as field lists in
rST, where the new generator will format this information as:
```
:arg type name: lorem ipsum
dolor sit amet
consectetur apidiscing elit
```
...and can be formed by the simple concatenation of the field list
construct and the body text. The indents help preserve the continuation
of a block-level element, and further allow the use of additional rST
block-level constructs such as code blocks, lists, and other such
markup.
This understandably breaks the existing qapidoc.py; so a new function is
added there to dedent the text for compatibility. Once the new generator
is merged, this function will not be needed any longer and can be
dropped.
I verified this patch changes absolutely nothing by comparing the
md5sums of the QMP ref html pages both before and after the change, so
it's certified inert. QAPI test output has been updated to reflect the
new strategy of preserving indents for rST.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-6-jsnow@redhat.com>
[Lost commit message paragraph restored]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently setup_sd_card() asks the card its address,
but discard the response and use hardcoded 0x4567.
Set the SDHC_CMD_RESPONSE bit to have the controller
record the bus response, and read the response from
the RSPREG0 register. Then we can select the card with
its real address.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240702140842.54242-4-philmd@linaro.org>
Add tests to exercise the MTE stubs. The tests will only run if a
version of GDB that supports MTE is available in the test environment.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
[AJB: re-base and checkpatch fixes]
Message-Id: <20240628050850.536447-12-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-41-alex.bennee@linaro.org>
We are interested in the particular instruction so we should use a
stable record for it. We could bring this down to physical address but
for now vaddr + disas seems to do the trick.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-23-alex.bennee@linaro.org>
While the match functionality is useful lets make the verbosity
optional while we are actually running.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-22-alex.bennee@linaro.org>
Clang requires the architecture to be set properly
in order to assemble the half-precision instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-13-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-18-alex.bennee@linaro.org>
Clang does not allow specifying an integer as the value of a single
precision register. Explicitly move value from a general register.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
[rth: Use one single inline asm block.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-12-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-17-alex.bennee@linaro.org>
Clang does not support IWMXT instructions.
Fall back to the external assembler.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-11-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-16-alex.bennee@linaro.org>
This is redudant with a linker script, and is not
supported by clang.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-10-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-15-alex.bennee@linaro.org>
The test cases for "converting double-precision to single-precision"
emits float but the result variable was typed as uint32_t and corrupted
the printed values. Propertly type it as float.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Fixes: 8ec8a55e3f ("tests/tcg/arm: add fcvt test cases for AArch32/64")
Message-Id: <20240627-tcg-v2-1-1690a813348e@daynix.com>
[rth: Update arm ref file as well]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-9-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-14-alex.bennee@linaro.org>
The only use of SME is inline assembly. Both gcc and clang only
support SME with very recent releases; by deferring detection to
the assembler we get better test coverage.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-8-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-13-alex.bennee@linaro.org>
clang version 18.1.6 does not support x constraint for AArch64.
Use w instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-tcg-v2-5-1690a813348e@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-7-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-12-alex.bennee@linaro.org>
clang version 18.1.6 assumes a register is 64-bit by default and
complains if a 32-bit value is given. Explicitly specify register width
when passing a 32-bit value.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240627-tcg-v2-3-1690a813348e@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-5-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-10-alex.bennee@linaro.org>
This option is not supported by clang, and is not required
in order to get sve code generation with gcc 12.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-4-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-9-alex.bennee@linaro.org>
Define the variable to the compiler flag used, not "y".
This avoids replication of the compiler flag itself.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-8-alex.bennee@linaro.org>
This avoids a memcpy to the stack when compiled with clang.
Since we don't enable optimization, nor provide memcpy,
this results in an undefined symbol error at link time.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-7-alex.bennee@linaro.org>
Previously we are always specifying -u $(UID) to match the UID in the
container with one outside. This causes a problem with rootless Podman.
Rootless Podman remaps user IDs in the container to ones controllable
for the current user outside. The -u option instructs Podman to use
a specified UID in the container but does not affect the UID remapping.
Therefore, the UID in the container can be remapped to some other UID
outside the container. This can make the access to bind-mounted volumes
fail because the remapped UID mismatches with the owner of the
directories.
Replace -u $(UID) with --userns keep-id, which fixes the UID remapping.
This change is limited to Podman because Docker does not support
--userns keep-id.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240626-podman-v1-1-f8c8daf2bb0a@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-6-alex.bennee@linaro.org>
I guess we never noticed and tried to build with this cross image. Fix
the toolchain prefix so we actually build 32 bit images.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-2-alex.bennee@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update the list of supported architectures to include RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-14-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Update list of images supported in unpack_edk2_blobs to enable RISC-V
ACPI table testing.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-13-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Same machine name can be used by different architectures. Hence, create
aarch64 folder and move all aarch64 related AML files for virt machine
inside.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-11-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support multiple architectures using same machine name, create x86
folder and move all x86 related AML files for each machine type inside.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-10-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To search for expected AML files under ${arch}/${machine} path, set this
field for X86 related test cases.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-9-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To search for expected AML files under ${arch}/${machine} path, set this
field for AARCH64 related test cases.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-8-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since machine name can be common for multiple architectures (ex: virt),
add "arch" in the path to search for expected AML files. Since the AML
files are still under old path, add support for searching with and
without arch in the path.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-7-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Existing AARCH64 virt test functions do not have AARCH64 in their name.
To add RISC-V virt related test cases, better to rename existing
functions to indicate they are ARM only.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-6-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To test ACPI tables, edk2 needs to be booted with a disk image having
EFI partition. This image is created using UefiTestToolsPkg.
The image is generated using tests/uefi-test-tools source.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Message-Id: <20240625150839.1358279-5-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
edk2-funcs.sh which is used in this Makefile, was removed in the commit
c28a2891f3 ("edk2: update build script"). It is replaced with a python
based script. So, update the Makefile and add the configuration file as
required to support the python based build script.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-4-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable building the test application for RISC-V with appropriate
dependencies updated.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-3-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`memory-backend-shm` can be used with vhost-user devices, so let's
add a new test case for it.
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240618100534.145917-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`memory-backend-memfd` is available only on Linux while the new
`memory-backend-shm` can be used on any POSIX-compliant operating
system. Let's use it so we can run the test in multiple environments.
Since we are here, let`s remove `share=on` which is the default for shm
(and also for memfd).
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240618100527.145883-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Argument ordering for setcond2 is:
output, a_low, a_high, b_low, b_high, cond
The test is supposed to be against b_low, not a_high.
Cc: qemu-stable@nongnu.org
Fixes: ceb9ee06b7 ("tcg/optimize: Handle TCG_COND_TST{EQ,NE}")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2413
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240701024623.1265028-1-richard.henderson@linaro.org>
The non-standard .fa library suffix breaks the link source
de-duplication done by Meson so drop it.
The lack of link source de-duplication causes AddressSanitizer to
complain ODR violations, and makes GNU ld abort when combined with
clang's LTO.
Fortunately, the non-standard suffix is not necessary anymore for
two reasons.
First, the non-standard suffix was necessary for fork-fuzzing.
Meson wraps all standard-suffixed libraries with --start-group and
--end-group. This made a fork-fuzz.ld linker script wrapped as well and
broke builds. Commit d2e6f9272d ("fuzz: remove fork-fuzzing
scaffolding") dropped fork-fuzzing so we can now restore the standard
suffix.
Second, the libraries are not even built anymore, because it is
possible to just use the object files directly via extract_all_objects().
The occurences of the suffix were detected and removed by performing
a tree-wide search with 'fa' and .fa (note the quotes and dot).
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-xkb-v4-4-2de564e5c859@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used to request declare_dependency() to link_whole static libraries.
If a static library is a thin archive, GNU ld keeps all object files
referenced by the archive open, and sometimes exceeds the open file limit.
Another problem with link_whole is that suboptimal handling of nested
dependencies.
link_whole by itself does not propagate dependencies. In particular,
gnutls, a dependency of crypto, is not propagated to its users, and we
currently workaround the issue by declaring gnutls as a dependency for
each crypto user. On the other hand, if you write something like
libfoo = static_library('foo', 'foo.c', dependencies: gnutls)
foo = declare_dependency(link_whole: libfoo)
libbar = static_library('bar', 'bar.c', dependencies: foo)
bar = declare_dependency(link_whole: libbar, dependencies: foo)
executable('prog', sources: files('prog.c'), dependencies: [foo, bar])
hoping to propagate the gnutls dependency into bar.c, you'll see a
linking failure for "prog", because the foo.c.o object file is included in
libbar.a and therefore it is linked twice into "prog": once from libfoo.a
and once from libbar.a. Here Meson does not see the duplication, it
just asks the linker to link all of libfoo.a and libbar.a into "prog".
Instead of using link_whole, extract objects included in static libraries
and pass them to declare_dependency(); and then the dependencies can be
added as well so that they are propagated, because object files on the
linker command line are always deduplicated.
This requires Meson 1.1.0 or later.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-objects-v1-1-07cbbe96166b@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Don't open qcow2 data files in 'qemu-img info'
- Disallow protocol prefixes for qcow2 data files, VMDK extent files and
other child nodes that are neither 'file' nor 'backing'
-----BEGIN PGP SIGNATURE-----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=7LWn
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches (CVE-2024-4467)
- Don't open qcow2 data files in 'qemu-img info'
- Disallow protocol prefixes for qcow2 data files, VMDK extent files and
other child nodes that are neither 'file' nor 'backing'
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmaEKQwRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9YgMA/+OeQf0veFb02ZNqf907Etz8/DvnqbiWUN
# 0aT5z5x8ilZQIiEDbFtLKgF3A/WO7phyCKk1q1dbRNbc1ZaWFW7mTaJM2ew++EuB
# fq0mnskLt/GVSqTReO4od7flsssp3sEDxs74yuyNITIUqui4we9WK2lLRiAv3aco
# 2NbyNeMHJxIW+QlOO3R62i24yjQaLyg/YekmiIK8itQkpKuI80fiVgor5W3RR0P0
# 71AVSHC0Edv5eavmiRqmQ+pfSI8tlINsN1s5jvxge6XpVTaL8NHsgH3LVv1R3Qtx
# Uo9hp6lQboAfc4I06gf+fcsYSBRiGCwA/J+JsWusX4FLaaTNHLt5eJAEJhfZlioj
# wgTqpy2ImRu5lcuLjLWRu4cLapPLI6CSwf4/lG9/szmRA/1UtOKpquKeTuCwMl9Y
# XEVoNDzo7GpfSb7YONo7fU7kq00OuEEAn0he7eNd2UU+Ao9Abi7JvY+fKx71FHo3
# k24SQVhVJihV1IEC4psCtaQm2bB/jdMr0jB44zHLtmqeUMLrrVf64cSAntp+2KRa
# sINBXA5OeblGKQ7FoAzc5NNNveSdF1ioRCvKB3MlHzI+efzRS7+I3wwh2Uz1Uwfo
# sivg+dAXQQBKVXn8UbfznFyEKueT0RW5CUbfeEqGQ/ocw7iTrXABsX+tjcktxl8Q
# zrHZNoAz6Ds=
# =7LWn
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Jul 2024 09:21:32 AM PDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
block: Parse filenames only when explicitly requested
iotests/270: Don't store data-file with json: prefix in image
iotests/244: Don't store data-file with protocol in image
qcow2: Don't open data_file with BDRV_O_NO_IO
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to disable filename parsing for data files because it's too easy
to abuse in malicious image files. Make the test ready for the change by
passing the data file explicitly in command line options.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
We want to disable filename parsing for data files because it's too easy
to abuse in malicious image files. Make the test ready for the change by
passing the data file explicitly in command line options.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
One use case for 'qemu-img info' is verifying that untrusted images
don't reference an unwanted external file, be it as a backing file or an
external data file. To make sure that calling 'qemu-img info' can't
already have undesired side effects with a malicious image, just don't
open the data file at all with BDRV_O_NO_IO. If nothing ever tries to do
I/O, we don't need to have it open.
This changes the output of iotests case 061, which used 'qemu-img info'
to show that opening an image with an invalid data file fails. After
this patch, it succeeds. Replace this part of the test with a qemu-io
call, but keep the final 'qemu-img info' to show that the invalid data
file is correctly displayed in the output.
Fixes: CVE-2024-4467
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Introduce a test, that checks that plug/unplug of virtio-blk device
works.
(the test is developed by copying hotplug_cpu.py, so keep original
copyright)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240409065854.366856-1-vsementsov@yandex-team.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These GThreads are never referenced.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-15-750bb0946dbd@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This fixes LeakSanitizer warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-14-750bb0946dbd@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This fixes LeakSanitizer warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-12-750bb0946dbd@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This fixes LeakSanitizer warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-11-750bb0946dbd@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A test function may not be executed depending on the test command line
so it is wrong to free data with a test function. Use
qtest_add_data_func_full() to register a function to free data.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-10-750bb0946dbd@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
s390x with TCG is more stable now. Enable it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240525131241.378473-3-npiggin@gmail.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
[thuth: Added "with TCG" to the commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the scenario where vhost-user sets eventfd to -1,
qemu_chr_fe_get_msgfds retrieves fd as -1. When vhost_user_read
receives, it does not perform blocking operations on the descriptor
with fd=-1, so non-blocking operations should not be performed here
either.This is a normal use case. Calling g_unix_set_fd_nonblocking
at this point will cause the test to interrupt.
When vhost_user_write sets the call fd to -1, it sets the number of
fds to 0, so the fds obtained by qemu_chr_fe_get_msgfds will also
be 0.
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Message-Id: <20240411073555.1357-1-yuxue.liu@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Validate that a shutdown via the pvpanic device emits the correct
QMP events.
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240527-pvpanic-shutdown-v8-7-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid the necessity to update all tests when new events are added
to the device.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-4-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
EXTI's new field `irq_levels` tracks irq levels between tests when using
`global_qtest`.
This happens in `stm32l4x5_exti-test.c`, `stm32l4x5_syscfg-test.c` and
`stm32l4x5_gpio-test.c` (`dm163.c` doesn't use `global_qtest`).
To ensure that `irq_levels` has the same value before and after each
QTest, this commit toggles back the irq lines that were changed at the
end of each problematic test. Most QTests were already doing this.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-3-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QTest `test_irq_pin_multiplexer` makes the assumption that the
reset state of irq line 15 is low, which is false since STM32L4x5 GPIO
was implemented (the reset state of pin GPIOA15 is high because there's
pull-up and it results in the irq line 15 also being high at reset).
It wasn't triggering an error because `test_interrupt` was mistakenly
"resetting" the line low.
This commit corrects these two mistakes by :
- not setting the line low in `test_interrupt`
- using an irq line in `test_irq_pin_multiplexer` which is low at reset
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629104454.366283-1-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The version of the sbsa-ref EDK2 firmware we used to use in this test
had a bug where it might make an unaligned access to the framebuffer,
which causes a guest crash on newer versions of QEMU where we enforce
the architectural requirement that unaligned accesses to Device memory
should take an exception.
We happened to not notice this because our test was booting with "-smp
1" and through luck this didn't write the boot logo to the framebuffer
at an unaligned address; but trying to boot the same firmware with two
CPUs would result in a guest crash. Now we have updated the firmware
we're using for the test, we can make the test use all the cores on the
board, so we are testing the SMP boot path.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240620-b4-new-firmware-v3-2-29a3a2f1be1e@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update firmware to have graphics card memory fix from EDK2 commit
c1d1910be6e04a8b1a73090cf2881fb698947a6e:
OvmfPkg/QemuVideoDxe: add feature PCD to remap framebuffer W/C
Some platforms (such as SBSA-QEMU on recent builds of the emulator) only
tolerate misaligned accesses to normal memory, and raise alignment
faults on such accesses to device memory, which is the default for PCIe
MMIO BARs.
When emulating a PCIe graphics controller, the framebuffer is typically
exposed via a MMIO BAR, while the disposition of the region is closer to
memory (no side effects on reads or writes, except for the changing
picture on the screen; direct random access to any pixel in the image).
In order to permit the use of such controllers on platforms that only
tolerate these types of accesses for normal memory, it is necessary to
remap the memory. Use the DXE services to set the desired capabilities
and attributes.
Hide this behavior under a feature PCD so only platforms that really
need it can enable it. (OVMF on x86 has no need for this)
With this fix enabled we can boot sbsa-ref with more than one cpu core.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240620-b4-new-firmware-v3-1-29a3a2f1be1e@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Found with fuzzing for qemu-8.2, but also relevant for master
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-ID: <20240521103106.119021-3-frolov@swemel.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make sure there will be an event for postcopy recovery, irrelevant of
whether the reconnect will success, or when the failure happens.
The added new case is to fail early in postcopy recovery, in which case it
didn't even reach RECOVER stage on src (and in real life it'll be the same
to dest, but the test case is just slightly more involved due to the dual
socketpair setup).
To do that, rename the postcopy_recovery_test_fail to reflect either stage
to fail, instead of a boolean.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Making sure the postcopy-recover-setup status is present in the postcopy
failure unit test. Note that it only applies to src QEMU not dest.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Introduce a small helper to wait for a migration event, generalized from
the incoming migration path. Make the helper easier to use by allowing it
to keep waiting until the expected event is received.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Libvirt should always enable it, so it'll be nice qtest also cover that for
all tests on both sides. migrate_incoming_qmp() used to enable it only on
dst, now we enable them on both, as we'll start to sanity check events even
on the src QEMU.
We'll need to leave the one in migrate_incoming_qmp(), because
virtio-net-failover test uses that one only, and it relies on the events to
work.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Most of them are not needed, we can stick with one ifdef inside
postcopy_recover_fail() so as to cover the scm right tricks only.
The tests won't run on windows anyway due to has_uffd always false.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add a multifd test for mapped-ram with passing of fds into QEMU. This
is how libvirt will consume the feature.
There are a couple of details to the fdset mechanism:
- multifd needs two distinct file descriptors (not duplicated with
dup()) so it can enable O_DIRECT only on the channels that do
aligned IO. The dup() system call creates file descriptors that
share status flags, of which O_DIRECT is one.
- the open() access mode flags used for the fds passed into QEMU need
to match the flags QEMU uses to open the file. Currently O_WRONLY
for src and O_RDONLY for dst.
Note that fdset code goes under _WIN32 because fd passing is not
supported on Windows.
Reviewed-by: Peter Xu <peterx@redhat.com>
[brought back the qmp_remove_fd() call at the end of the tests]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The tests are only allowed to run in systems that know about the
O_DIRECT flag and in filesystems which support it.
Note: this also brings back migrate_set_parameter_bool() which went
away when we removed the compression tests. I copied it verbatim.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
monitor_fdsets_cleanup() currently has three responsibilities:
1- Remove the fds that have been marked for removal(->removed=true) by
qmp_remove_fd(). This is overly complicated, but ok.
2- Remove any file descriptors that have been passed into QEMU and
never duplicated[1,2]. A file descriptor without duplicates
indicates that no part of QEMU has made use of it. This is
problematic because the current implementation does it only if the
guest is not running and the monitor is closed.
3- Remove/free fdsets that have become empty due to the above
removals. This is ok.
The scenario described in (2) is starting to show some cracks now that
we're trying to consume fds from the migration code:
- Doing cleanup every time the last monitor connection closes works to
reap unused fds, but also has the side effect of forcing the
management layer to pass the file descriptors again in case of a
disconnect/re-connect, if that happened to be the only monitor
connection.
Another side effect is that removing an fd with qmp_remove_fd() is
effectively delayed until the last monitor connection closes.
The usage of mon_refcount is also problematic because it's racy.
- Checking runstate_is_running() skips the cleanup unless the VM is
running and avoids premature cleanup of the fds, but also has the
side effect of blocking the legitimate removal of an fd via
qmp_remove_fd() if the VM happens to be in another state.
This affects qmp_remove_fd() and qmp_query_fdsets() in particular
because requesting a removal at a bad time (guest stopped) might
cause an fd to never be removed, or to be removed at a much later
point in time, causing the query command to continue showing the
supposedly removed fd/fdset.
Note that file descriptors that *have* been duplicated are owned by
the code that uses them and will be removed after qemu_close() is
called. Therefore we've decided that the best course of action to
avoid the undesired side-effects is to stop managing non-duplicated
file descriptors.
1- efb87c1697 ("monitor: Clean up fd sets on monitor disconnect")
2- ebe52b592d ("monitor: Prevent removing fd from set during init")
Reviewed-by: Peter Xu <peterx@redhat.com>
[fix logic mistake: s/fdset_free/fdset_free_if_empty]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add a test for file migration using fdset. The passing of fds is more
complex than using a file path. This is also the scenario where it's
most important we ensure that the initial migration stream offset is
respected because the fdset interface is the one used by the
management layer when providing a non empty migration file.
Note that fd passing is not available on Windows, so anything that
uses add-fd needs to exclude that platform.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
When doing file migration, QEMU accepts an offset that should be
skipped when writing the migration stream to the file. The purpose of
the offset is to allow the management layer to put its own metadata at
the start of the file.
We have tests for this in migration-test, but only testing that the
migration stream starts at the correct offset and not that it actually
leaves the data intact. Unsurprisingly, there's been a bug in that
area that the tests didn't catch.
Fix the tests to write some data to the offset region and check that
it's actually there after the migration.
While here, switch to using g_get_file_contents() which is more
portable than mmap().
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
PCMachineClass::enforce_aligned_dimm was only used by the
pc-i440fx-2.1 machine, which got removed. It is now always
true. Remove it, simplifying pc_get_device_memory_range().
Update the comment in Avocado test_phybits_low_pse36().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-14-philmd@linaro.org>
Add a test case to test Aspeed OpenBMC SDK v09.01 on AST2700 board.
It loads u-boot-nodtb.bin, u-boot.dtb, tfa and optee-os
images to dram first which base address is 0x400000000.
Then, boot and launch 4 cpu cores.
```
qemu-system-aarch64 -machine ast2700-evb
-device loader,force-raw=on,addr=0x400000000,file=workdir/u-boot-nodtb.bin \
-device loader,force-raw=on,addr=uboot_dtb_load_addr,file=workdir/u-boot.dtb\
-device loader,force-raw=on,addr=0x430000000,file=workdir/bl31.bin\
-device loader,force-raw=on,addr=0x430080000,file=workdir/optee/tee-raw.bin\
-device loader,cpu-num=0,addr=0x430000000 \
-device loader,cpu-num=1,addr=0x430000000 \
-device loader,cpu-num=2,addr=0x430000000 \
-device loader,cpu-num=3,addr=0x430000000 \
-smp 4 \
-drive file=workdir/image-bmc,format=raw,if=mtd
```
A test image is downloaded from the ASPEED Forked OpenBMC GitHub release repository :
https://github.com/AspeedTech-BMC/openbmc/releases/
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
add qpl to compression method test for multifd migration
the qpl compression supports software path and hardware
path(IAA device), and the hardware path is used first by
default. If the hardware path is unavailable, it will
automatically fallback to the software path for testing.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Similar to other archs, build a custom bios memory updater. Running the
test with OF code is a cool trick, but SLOF takes a long time to boot.
This reduces test time by around 3x (150s to 50s).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
ppc64 with TCG seems to no longer be failing this test, perhaps since
commit 03bfc2188f ("physmem: Fix migration dirty bitmap coherency
with TCG memory access") which is not ppc specific but was seen to hit
ppc64 quite easily.
Let's enable it again.
The s390x problem has been identified so mention it while we are
adjusting the comment.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The spapr QEMU machine defaults is useful outside libqos, so create a
new header for ppc specific qtests and move it there.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
* Make qtests more flexible with regards to non-available CPU models
* Improvements for the test-smp-parse unit test
-----BEGIN PGP SIGNATURE-----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=s7+V
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-06-12' of https://gitlab.com/thuth/qemu into staging
* Fix loongarch64 avocado test
* Make qtests more flexible with regards to non-available CPU models
* Improvements for the test-smp-parse unit test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmZpoEoRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVF6g/+JYTRKmaIduQIP9g2+NkM+qMTbjI9Ow47
# 8Vdj/ePMXNWOZsgMPkCUdisYeMZEC+XMcDN1xvwZXwLTMTJRacZCSFRpeN4P0m0W
# 6aQ28+tPNgx+B9Eh2kc4TpxbiqSH8u5u4GEN4Y07rcX/3YbYyjFgZD8orRu/nJ+H
# 0wV7Riq9csi1BkLxrgKaHocFSOl4eOga4OFi+u4wIn/xoW3MN0laxe4iuoQRMZPf
# gJLPRhEija4lto8iIKNxJbTABB0wEcWRWtgqcbHxdatqh1lPTPBpWxmdD/v1LJn+
# H/eO+oh05NQdlhw7+xfWF9PD+MpIePbZ28oNb3X3uURROTdcxpBAgpPipv07FsT4
# LmU2nIBQ4FcpDOkhLnLmBmFBNO6uDCzuGzxFRhX1SIiGMABqTDOKynBQSgQI2iB0
# 5J47XUwHtnOoCvf4SRA/MZG8zNSQZdJbnuOBLgZ+vsCG14mWM2NbfSUwRkH6pd/J
# fEbODuzHZoYgUTxjR9+WMbINAbNjMy+SP2sGZIBzcAIIkybKynOy58LoCyNT684U
# ean9bnc65908PJxEfsQ6k9kNwkK4GwOqZi+X383nVgMJ9+3dDw8M76IVU59hsq1n
# wnz4VgFcRdXMYhj9zghaCgH2Ezw8gZHILXH+RlX0Bav4LQ5vSZQ6tRNwM4+rfXBe
# okF1Sxmz31U=
# =s7+V
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 12 Jun 2024 06:19:06 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2024-06-12' of https://gitlab.com/thuth/qemu:
tests/tcg/s390x: Allow specifying extra QEMU options on the command line
tests/unit/test-smp-parse: Test the full 8-levels topology hierarchy
tests/unit/test-smp-parse: Test "modules" and "dies" combination case
tests/unit/test-smp-parse: Test "modules" parameter in -smp
tests/unit/test-smp-parse: Make test cases aware of module level
tests/unit/test-smp-parse: Use default parameters=0 when not set in -smp
tests/unit/test-smp-parse: Fix an invalid topology case
tests/unit/test-smp-parse: Fix comment of parameters=1 case
tests/unit/test-smp-parse: Fix comments of drawers and books case
test: Remove libibumad dependence
meson: Remove libibumad dependence
tests/qtest/x86: check for availability of older cpu models before running tests
tests/qtest/libqtest: add qtest_has_cpu_model() api
qtest/x86/numa-test: do not use the obsolete 'pentium' cpu
tests/avocado: Update LoongArch bios file
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The use case for this is `make check-tcg EXTFLAGS="-accel kvm"`,
which allows validating the system TCG testcases on real hardware.
EXTFLAGS name is borrowed from tests/tcg/xtensa/Makefile.softmmu-target.
While at it, use += instead of = in order to be consistent with the
other architectures.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522184116.35975-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With module level, QEMU now support 8-levels topology hierarchy.
Cover "modules" in SMP_CONFIG_WITH_FULL_TOPO related cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-9-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since i386 PC machine supports both "modules" and "dies" in -smp, add the
"modules" and "dies" combination test case to match the actual topology
usage scenario.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-8-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cover the module cases in test-smp-parse.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-7-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, -smp supports module level.
It is necessary to consider the effects of module in the test cases to
ensure that the calculations are correct. This is also the preparation
to add module test cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-6-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since -smp allows parameters=1 whether the level is supported by
machine, to avoid the test scenarios where the parameter defaults to 1
cause some errors to be masked, explicitly set undesired parameters to
0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-5-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Adjust the "cpus" parameter to match the comment configuration.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-4-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SMP_CONFIG_WITH_FULL_TOPO hasn't support module level, so the parameter
should indicate the "clusters".
Additionally, reorder the parameters of -smp to match the topology
hierarchy order.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-3-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix the comments to match the actual configurations.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-2-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove libibumad dependence from the test environment.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240611105427.61395-3-pizhenwei@bytedance.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is better to check if some older cpu models like 486, athlon, pentium,
penryn, phenom, core2duo etc are available before running their corresponding
tests. Some downstream distributions may no longer support these older cpu
models.
Signature of add_feature_test() has been modified to return void as
FeatureTestArgs* was not used by the caller.
One minor correction. Replaced 'phenom' with '486' in the test
'x86/cpuid/auto-level/phenom/arat' matching the cpu used.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240610155303.7933-4-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Added a new test api qtest_has_cpu_model() in order to check availability of
some cpu models in the current QEMU binary. The specific architecture of the
QEMU binary is selected using the QTEST_QEMU_BINARY environment variable.
This api would be useful to run tests against some older cpu models after
checking if QEMU actually supported these models.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240610155303.7933-3-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'pentium' cpu is old and obsolete and should be avoided for running tests if
its not strictly needed. Use 'max' cpu instead for generic non-cpu specific
numa test.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20240610155303.7933-2-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The VM uses old bios to boot up only 1 cpu, causing the test case to fail.
Update the bios to solve this problem.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20240604030058.2327145-1-gaosong@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The n_threads argument is no longer used since the previous commit.
Remove it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240527155851.892885-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Hexagon Programmer's Reference Manual says that the exception 0x1e
should be raised upon an unaligned program counter. Let's implement that
and also add some tests.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <277b7aeda2c717a96d4dde936b3ac77707cb6517.1714755107.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
At 09a7e7db0f (Hexagon (target/hexagon) Remove uses of
op_regs_generated.h.inc, 2024-03-06), we've changed the logic of
check_new_value() to use the new pre-calculated
packet->insn[...].dest_idx instead of calculating the index on the fly
using opcode_reginfo[...]. The dest_idx index is calculated roughly like
the following:
for reg in iset[tag]["syntax"]:
if reg.is_written():
dest_idx = regno
break
Thus, we take the first register that is writtable. Before that,
however, we also used to follow an alphabetical order on the register
type: 'd', 'e', 'x', and 'y'. No longer following that makes us select
the wrong register index and the HVX store new instruction does not
update the memory like expected.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <f548dc1c240819c724245e887f29f918441e9125.1716220379.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZmE0HwAKCRBAov/yOSY+
396sA/90m/zr91pLQlkhFuYLHg958Ow3L5ysblcuAAmcTXGi8iE9IeTTeZru6WEO
H/CL/njUkIgP+/Tio0n0Lx6rWkxOzGxWCpvzqrabsPGvs4GUtFEjI/2pvEWP6C9/
S6Jon3py0oZeoVx8D6Tr/CJrhD0IBptbEn1aiQNDRuSzeuCo1Q==
=xpjH
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240606' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240606
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZmE0HwAKCRBAov/yOSY+
# 396sA/90m/zr91pLQlkhFuYLHg958Ow3L5ysblcuAAmcTXGi8iE9IeTTeZru6WEO
# H/CL/njUkIgP+/Tio0n0Lx6rWkxOzGxWCpvzqrabsPGvs4GUtFEjI/2pvEWP6C9/
# S6Jon3py0oZeoVx8D6Tr/CJrhD0IBptbEn1aiQNDRuSzeuCo1Q==
# =xpjH
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 08:59:27 PM PDT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240606' of https://gitlab.com/gaosong/qemu:
target/loongarch: fix a wrong print in cpu dump
hw/loongarch/virt: Enable extioi virt extension
hw/loongarch/virt: Use MemTxAttrs interface for misc ops
hw/intc/loongarch_extioi: Add extioi virt extension definition
tests/qtest: Add numa test for loongarch system
tests/libqos: Add loongarch virt machine node
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the new ability to output YAML we can build the package list for
our ansible setup scripts. We will integrate them in the next commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-12-alex.bennee@linaro.org>
Beside g++ we also need the mingw-w64-tools for properly building
the code in qga/vss-win32/ , so let's install that package now, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240601070543.37786-5-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-11-alex.bennee@linaro.org>
Update to the latest version of lcitool. It dropped support for Fedora 38
and Alpine 3.18, so we have to update these to newer versions here, too.
Python 3.12 dropped the "imp" module which we still need for running
Avocado. Fortunately Fedora 40 still ships with a work-around package
that we can use until somebody updates our Avocado to a newer version.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240601070543.37786-3-thuth@redhat.com>
[AJB: regen on rebase]
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-10-alex.bennee@linaro.org>
We've missed to delete this file when removing support for CentOS 8.
Since the current upstream version of the lcitool removed support
for CentOS 8 now, too, we have to remove the file before updating.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240601070543.37786-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-8-alex.bennee@linaro.org>
This isn't really used and we have lighter weight docker containers
for testing this stuff directly.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-5-alex.bennee@linaro.org>
As Centos Stream 8 goes out of support we need to update. To do this
powertools is replaced by crb and we don't over specify the python3 we
want.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-4-alex.bennee@linaro.org>
Add numa test case for loongarch system, it passes to run
with command "make check-qtest".
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240528082155.938586-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add loongarch virt machine to the graph. It is a modified copy of
the existing riscv virtmachine in riscv-virt-machine.c
It contains a generic-pcihost controller, and an extra function
loongarch_config_qpci_bus() to configure GPEX pci host controller
information, such as ecam and pio_base addresses.
Also hotplug handle checking about TYPE_VIRTIO_IOMMU_PCI device is
added on loongarch virt machine, since virtio_mmu_pci device requires
it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240528082053.938564-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prevent regressions when using NBD with TLS in the presence of
iothreads, adding coverage the fix to qio channels made in the
previous patch.
The shell function pick_unused_port() was copied from
nbdkit.git/tests/functions.sh.in, where it had all authors from Red
Hat, agreeing to the resulting relicensing from 2-clause BSD to GPLv2.
CC: qemu-stable@nongnu.org
CC: "Richard W.M. Jones" <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240531180639.1392905-6-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Partial support for NUMA setup:
- cpu nodes
- memory nodes
Used versions:
- Trusted Firmware v2.11.0
- Tianocore EDK2 stable202405
- Tianocore EDK2 Platforms code commit 4bbd0ed
Firmware is built using Debian 'bookworm' cross toolchain (gcc 12.2.0).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes test-failure on Fedora 40 CI.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240527040711.311865-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to avoid regressions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-15-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We want to have similar QMP objects in different tests. Reworking these
objects to make common parts by calling some helper functions doesn't
seem good. It's a lot more comfortable to see the whole QAPI request in
one place.
So, let's increase the limit, to unblock further commit
"iotests: add backup-discard-source"
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add test for a new backup option: discard-source.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-6-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Currently block_copy creates copy_bitmap in source node. But that is in
bad relation with .independent_close=true of copy-before-write filter:
source node may be detached and removed before .bdrv_close() handler
called, which should call block_copy_state_free(), which in turn should
remove copy_bitmap.
That's all not ideal: it would be better if internal bitmap of
block-copy object is not attached to any node. But that is not possible
now.
The simplest solution is just create copy_bitmap in filter node, where
anyway two other bitmaps are created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-4-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
linux-user/i386: Fix allocation and alignment of fp state in signal frame
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
0KPd/A==
=sYrE
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu into staging
target/i386: Introduce X86Access and use for xsave and friends
linux-user/i386: Fix allocation and alignment of fp state in signal frame
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
# MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
# oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
# rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
# EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
# bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
# 0KPd/A==
# =sYrE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 26 May 2024 05:48:44 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu: (28 commits)
target/i386: Pass host pointer and size to cpu_x86_{xsave,xrstor}
target/i386: Pass host pointer and size to cpu_x86_{fxsave,fxrstor}
target/i386: Pass host pointer and size to cpu_x86_{fsave,frstor}
target/i386: Convert do_xrstor to X86Access
target/i386: Convert do_xsave to X86Access
linux-user/i386: Honor xfeatures in xrstor_sigcontext
linux-user/i386: Fix allocation and alignment of fp state
linux-user/i386: Return boolean success from xrstor_sigcontext
linux-user/i386: Return boolean success from restore_sigcontext
linux-user/i386: Fix -mregparm=3 for signal delivery
linux-user/i386: Split out struct target_fregs_state
linux-user/i386: Replace target_fpstate_fxsave with X86LegacyXSaveArea
linux-user/i386: Remove xfeatures from target_fpstate_fxsave
linux-user/i386: Drop xfeatures_size from sigcontext arithmetic
target/i386: Add {hw,sw}_reserved to X86LegacyXSaveArea
target/i386: Add rbfm argument to cpu_x86_{xsave,xrstor}
target/i386: Split out do_xsave_chk
target/i386: Convert do_xrstor_* to X86Access
target/i386: Convert do_xsave_* to X86Access
tagret/i386: Convert do_fxsave, do_fxrstor to X86Access
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For modern cpus, the kernel uses xsave to store all extra
cpu state across the signal handler. For xsave/xrstor to
work, the pointer must be 64 byte aligned. Moreover, the
regular part of the signal frame must be 16 byte aligned.
Attempt to mirror the kernel code as much as possible.
Use enum FPStateKind instead of use_xsave() and use_fxsr().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1648
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The dbus_display1_dep is not really used since all occurrences also
request gio independently. Just list the generated sources and drop
dbus_display1_dep.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
=lp7q
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* hw/i386/pc_sysfw: Alias rather than copy isa-bios region
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
# DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
# 7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
# lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
# g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
# t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
# =lp7q
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 May 2024 10:58:40 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
target-i386: hyper-v: Correct kvm_hv_handle_exit return value
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[4]
i386: Add cache topology info in CPUCacheInfo
hw/i386/pc: Support smp.modules for x86 PC machine
tests: Add test case of APIC ID for module level parsing
i386/cpu: Introduce module-id to X86CPU
i386: Support module_id in X86CPUTopoIDs
i386: Expose module level in CPUID[0x1F]
i386: Support modules_per_die in X86CPUTopoInfo
i386: Introduce module level cpu topology to CPUX86State
i386/cpu: Decouple CPUID[0x1F] subleaf with specific topology level
i386: Split topology types of CPUID[0x1F] from the definitions of CPUID[0xB]
i386/cpu: Introduce bitmap to cache available CPU topology levels
i386/cpu: Consolidate the use of topo_info in cpu_x86_cpuid()
i386/cpu: Use APIC ID info get NumSharingCache for CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use APIC ID info to encode cache topo in CPUID[4]
i386/cpu: Fix i/d-cache topology to core level for Intel CPU
target/i386: add control bits support for LAM
target/i386: add support for LAM in CPUID enumeration
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If analyze-migration.py cannot be run or crashes, the error is currently
ignored since the code only checks for nonzero values in case the child
exited properly. For example, if you run the test with a non-existing
Python interpreter, it still succeeds:
$ PYTHON=wrongpython QTEST_QEMU_BINARY=./qemu-system-x86_64 tests/qtest/migration-test
...
# Running /x86_64/migration/analyze-script
# Using machine type: pc-q35-9.1
# starting QEMU: exec ./qemu-system-x86_64 -qtest unix:/tmp/qtest-417639.sock -qtest-log /dev/null -chardev socket,path=/tmp/qtest-417639.qmp,id=char0 -mon chardev=char0,mode=control -display none -audio none -accel kvm -accel tcg -machine pc-q35-9.1, -name source,debug-threads=on -m 150M -serial file:/tmp/migration-test-XPLUN2/src_serial -drive if=none,id=d0,file=/tmp/migration-test-XPLUN2/bootsect,format=raw -device ide-hd,drive=d0,secs=1,cyls=1,heads=1 -uuid 11111111-1111-1111-1111-111111111111 -accel qtest
# starting QEMU: exec ./qemu-system-x86_64 -qtest unix:/tmp/qtest-417639.sock -qtest-log /dev/null -chardev socket,path=/tmp/qtest-417639.qmp,id=char0 -mon chardev=char0,mode=control -display none -audio none -accel kvm -accel tcg -machine pc-q35-9.1, -name target,debug-threads=on -m 150M -serial file:/tmp/migration-test-XPLUN2/dest_serial -incoming tcp:127.0.0.1:0 -drive if=none,id=d0,file=/tmp/migration-test-XPLUN2/bootsect,format=raw -device ide-hd,drive=d0,secs=1,cyls=1,heads=1 -accel qtest
**
ERROR:../../devel/qemu/tests/qtest/migration-test.c:1603:test_analyze_script: code should not be reached
migration-test: ../../devel/qemu/tests/qtest/libqtest.c:240: qtest_wait_qemu: Assertion `pid == s->qemu_pid' failed.
migration-test: ../../devel/qemu/tests/qtest/libqtest.c:240: qtest_wait_qemu: Assertion `pid == s->qemu_pid' failed.
ok 2 /x86_64/migration/analyze-script
...
Let's better fail the test in case the child did not exit properly, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
On s390x, we recently had a regression that broke migration / savevm
(see commit bebe9603fc ("hw/intc/s390_flic: Fix crash that occurs when
saving the machine state"). The problem was merged without being noticed
since we currently do not run any migration / savevm related tests on
x86 hosts.
While we currently cannot run all migration tests for the s390x target
on x86 hosts yet (due to some unresolved issues with TCG), we can at
least run some of the non-live tests to avoid such problems in the future.
Thus enable the "analyze-script" and the "bad_dest" tests before checking
for KVM on s390x or ppc64 (this also fixes the problem that the
"analyze-script" test was not run on s390x at all anymore since it got
disabled again by accident in a previous refactoring of the code).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
After i386 supports module level, it's time to add the test for module
level's parsing.
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Co-developed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240424154929.1487382-18-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support module level in i386 cpu topology structure "X86CPUTopoInfo".
Since x86 does not yet support the "modules" parameter in "-smp",
X86CPUTopoInfo.modules_per_die is currently always 1.
Therefore, the module level width in APIC ID, which can be calculated by
"apicid_bitwidth_for_count(topo_info->modules_per_die)", is always 0 for
now, so we can directly add APIC ID related helpers to support module
level parsing.
In addition, update topology structure in test-x86-topo.c.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Co-developed-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-14-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GDB commit a207f6b3a38 ('Rewrite "python" command exception handling')
changed how exit() called from Python scripts loaded by GDB behave,
turning it into an exception instead of a generic error code that is
returned. This change caused several QEMU tests to crash with the
following exception:
Python Exception <class 'SystemExit'>: 0
Error occurred in Python: 0
This happens because in tests/guest-debug/test_gdbstub.py exit is
called after the tests have completed.
This commit fixes it by politely asking GDB to exit via gdb.execute,
passing the proper fail_count to be reported to 'make', instead of
abruptly calling exit() from the Python script.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240515173132.2462201-4-gustavo.romero@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Validate that it is possible to pass 'parameter=1' for any SMP topology
parameter, since unsupported parameters are implicitly considered to
always have a value of 1.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-ID: <20240513123358.612355-3-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This effectively reverts
commit 54c4ea8f3a
Author: Zhao Liu <zhao1.liu@intel.com>
Date: Sat Mar 9 00:01:37 2024 +0800
hw/core/machine-smp: Deprecate unsupported "parameter=1" SMP configurations
but is not done as a 'git revert' since the part of the changes to the
file hw/core/machine-smp.c which add 'has_XXX' checks remain desirable.
Furthermore, we have to tweak the subsequently added unit test to
account for differing warning message.
The rationale for the original deprecation was:
"Currently, it was allowed for users to specify the unsupported
topology parameter as "1". For example, x86 PC machine doesn't
support drawer/book/cluster topology levels, but user could specify
"-smp drawers=1,books=1,clusters=1".
This is meaningless and confusing, so that the support for this kind
of configurations is marked deprecated since 9.0."
There are varying POVs on the topic of 'unsupported' topology levels.
It is common to say that on a system without hyperthreading, that there
is always 1 thread. Likewise when new CPUs introduced a concept of
multiple "dies', it was reasonable to say that all historical CPUs
before that implicitly had 1 'die'. Likewise for the more recently
introduced 'modules' and 'clusters' parameter'. From this POV, it is
valid to set 'parameter=1' on the -smp command line for any machine,
only a value > 1 is strictly an error condition.
It doesn't cause any functional difficulty for QEMU, because internally
the QEMU code is itself assuming that all "unsupported" parameters
implicitly have a value of '1'.
At the libvirt level, we've allowed applications to set 'parameter=1'
when configuring a guest, and pass that through to QEMU.
Deprecating this creates extra difficulty for because there's no info
exposed from QEMU about which machine types "support" which parameters.
Thus, libvirt can't know whether it is valid to pass 'parameter=1' for
a given machine type, or whether it will trigger deprecation messages.
Since there's no apparent functional benefit to deleting this deprecated
behaviour from QEMU, and it creates problems for consumers of QEMU,
remove this deprecation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-ID: <20240513123358.612355-2-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Run "make lcitool-refresh" after the previous changes to the
lcitool files. This removes the g++ and xfslibs-dev packages
from the dockerfiles (except for the fedora-win64-cross dockerfile
where we keep the C++ compiler).
Message-ID: <20240516084059.511463-6-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's try to keep the entries in alphabetical order here!
Message-ID: <20240516084059.511463-5-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We don't need C++ for the normal QEMU builds anymore, so installing
g++ in each and every container seems to be a waste of time and disk
space. The only container that still needs it is the Fedora MinGW
container that builds the only remaining C++ code in ./qga/vss-win32/
and we can install it there with an extra project yml file instead.
Message-ID: <20240516084059.511463-4-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU's commit a5730b8bd3 ("block/file-posix: Simplify the
XFS_IOC_DIOINFO handling") removed the need for the 'xfsprogs'
package.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[thuth: Adjusted the patch from the lcitools repo to QEMU's repo]
Message-ID: <20240516084059.511463-3-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In case lcitool fails (e.g. with a python backtrace), this makes
the output of lcitool much more readable.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240516084059.511463-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Count number of tb and insn executed using a conditional callback. We
ensure the callback has been called expected number of time (per vcpu).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240502211522.346467-7-pierrick.bouvier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240514174253.694591-9-alex.bennee@linaro.org>
We don't want to build on the default machine setup here but define a
custom one for the microbit.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240514174253.694591-2-alex.bennee@linaro.org>
All the lcitool generated containers define a "MAKE" env. It will be
convenient for later patches if all containers do this.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240513111551.488088-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ARM/aarch64 are easy to fix because they already have to pass a machine
type by hand. Just guard the tests with a check that the machine actually
exists.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do the bare minimum to ensure that at least a vanilla
--without-default-devices build works for all targets except i386,
x86_64 and ppc64. In particular this fixes s390x-softmmu; i386 and
x86_64 have about a dozen failing tests that do not pass -M and therefore
require a default machine type; ppc64 has the same issue, though only
with numa-test.
If we can for now ignore the cases where boards and devices are picked
by hand, drive_del-test however can be fixed easily; almost all tests
check for the virtio-blk or virtio-scsi device that they use, and are
already skipped. Only one didn't get the memo; plus another one does
not need a machine at all and can be run with -M none.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add boot-serial-test and filter test cases support on LoongArch system.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240509084745.2514607-1-maobibo@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU headers are relative to the include/ directory,
not to the project root directory. Remove "include/".
See also:
https://www.qemu.org/docs/master/devel/style.html#include-directives
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240507142737.95735-1-philmd@linaro.org>
The 'compress' migration capability enables the old compression code
which has shown issues over the years and is thought to be less stable
and tested than the more recent multifd-based compression. The old
compression code has been deprecated in 8.2 and now is time to remove
it.
Deprecation commit 864128df46 ("migration: Deprecate old compression
method").
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block migration is considered obsolete and has been deprecated in
8.2. Remove the migrate command option that enables it. This only
affects the QMP and HMP commands, the feature can still be accessed by
setting the migration 'block' capability. The whole feature will be
removed in a future patch.
Deprecation commit 8846b5bfca ("migration: migrate 'blk' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
* switch boards to "default y"
* allow building emulators without any board
* configs: list "implied" device groups in the default configs
* remove unnecessary declarations from typedefs.h
* target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASK
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY1ILsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNtIwf+MEehq2HudZvsK1M8FrvNmkB/AssO
x4tqL8DlTus23mQDBu9+rANTB93ManJdK9ybtf6NfjEwK+R8RJslLVnuy/qT+aQX
PD208L88fjZg17G8uyawwvD1VmqWzHFSN14ShmKzqB2yPXXo/1cJ30w78DbD50yC
6rw/xbC5j195CwE2u8eBcIyY4Hh2PUYEE4uyHbYVr57cMjfmmA5Pg4I4FJrpLrF3
eM2Avl/4pIbsW3zxXVB8QbAkgypxZErk3teDK1AkPJnlnBYM1jGKbt/GdKe7vcHR
V/o+7NlcbS3oHVItQ2gP3m91stjFq+NhixaZpa0VlmuqayBa3xNGl0G6OQ==
=ZbNW
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386: Introduce SapphireRapids-v3 to add missing features
* switch boards to "default y"
* allow building emulators without any board
* configs: list "implied" device groups in the default configs
* remove unnecessary declarations from typedefs.h
* target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASK
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY1ILsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNtIwf+MEehq2HudZvsK1M8FrvNmkB/AssO
# x4tqL8DlTus23mQDBu9+rANTB93ManJdK9ybtf6NfjEwK+R8RJslLVnuy/qT+aQX
# PD208L88fjZg17G8uyawwvD1VmqWzHFSN14ShmKzqB2yPXXo/1cJ30w78DbD50yC
# 6rw/xbC5j195CwE2u8eBcIyY4Hh2PUYEE4uyHbYVr57cMjfmmA5Pg4I4FJrpLrF3
# eM2Avl/4pIbsW3zxXVB8QbAkgypxZErk3teDK1AkPJnlnBYM1jGKbt/GdKe7vcHR
# V/o+7NlcbS3oHVItQ2gP3m91stjFq+NhixaZpa0VlmuqayBa3xNGl0G6OQ==
# =ZbNW
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 May 2024 10:36:59 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
qga/commands-posix: fix typo in qmp_guest_set_user_password
migration: do not include coroutine_int.h
kvm: move target-dependent interrupt routing out of kvm-all.c
pci: remove some types from typedefs.h
tcg: remove CPU* types from typedefs.h
display: remove GraphicHwOps from typedefs.h
qapi/machine: remove types from typedefs.h
monitor: remove MonitorDef from typedefs.h
migration: remove PostcopyDiscardState from typedefs.h
lockable: remove QemuLockable from typedefs.h
intc: remove PICCommonState from typedefs.h
qemu-option: remove QemuOpt from typedefs.h
net: remove AnnounceTimer from typedefs.h
numa: remove types from typedefs.h
qdev-core: remove DeviceListener from typedefs.h
fw_cfg: remove useless declarations from typedefs.h
build: do not build virtio-vga-gl if virgl/opengl not available
bitmap: Use g_try_new0/g_new0/g_renew
target/i386: Introduce SapphireRapids-v3 to add missing features
docs: document new convention for Kconfig board symbols
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A previous commit narrowed the type of .visit_alternate_type()
parameter @variants from QAPISchemaVariants to QAPISchemaAlternatives.
Rename it to @alternatives.
One of them passes @alternatives to helper function
gen_visit_alternate(). Rename its @variants parameter to
@alternatives as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The previous commit narrowed the type of .visit_object_type()
parameter @variants from QAPISchemaVariants to QAPISchemaBranches.
Rename it to @branches.
Same for .visit_object_type_flat().
A few of these pass @branches to helper functions:
QAPISchemaGenRSTVisitor.visit_object_type() to ._nodes_for_members()
and ._nodes_for_variant_when(), and
QAPISchemaGenVisitVisitor.visit_object_type() to
gen_visit_object_members(). Rename the helpers' @variants parameters
to @branches as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make sure the decoding of HVX .new is correctly handling this case
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240307032327.4799-6-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The documentation says:
SUBV Rm, Rn Rn - Rm -> Rn, underflow -> T
The overflow / underflow can be calculated as:
T = ((Rn ^ Rm) & (Result ^ Rn)) >> 31
However we were using the incorrect:
T = ((Rn ^ Rm) & (Result ^ Rm)) >> 31
Fix by using the Rn register instead of Rm.
Add tests provided by Paul Cercueil.
Cc: qemu-stable@nongnu.org
Fixes: ad8d25a11f ("target-sh4: implement addv and subv using TCG")
Reported-by: Paul Cercueil <paul@crapouillou.net>
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2318
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20240430163125.77430-3-philmd@linaro.org>
Benchmark each acceleration function vs an aligned buffer of zeros.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Together with the series at https://patchew.org/QEMU/20240423131612.28362-1-pbonzini@redhat.com/,
this allows adding sparc-softmmu to the target list of the
build-without-defaults CI job.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
`test_dm163_bank()`
Checks that the pin "sout" of the DM163 led driver outputs the values
received on pin "sin" with the expected latency (depending on the bank).
`test_dm163_gpio_connection()`
Check that changes to relevant STM32L4x5 GPIO pins are propagated to the
DM163 device.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-6-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exposing SYSCFG inputs to the SoC is practical in order to wire the SoC
to the optional DM163 display from the board code (GPIOs outputs need
to be connected to both SYSCFG inputs and DM163 inputs).
STM32L4x5 SYSCFG in-irq interception needed to be changed accordingly.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux kernel 5.10.16 binary for sunxi has been removed from
apt.armbian.com. This means that the avocado tests for these machines
will be skipped (status CANCEL) if the old binary isn't present in
the avocado cache.
Update to 6.6.16, in the same way we did in commit e384db41d8
when we moved to 5.10.16 in 2021.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2284
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20240415151845.1564201-1-peter.maydell@linaro.org
Verify that the ATA command READ NATIVE MAX ADDRESS returns the last
valid CHS tuple for the native device rather than any limit
established by INITIALIZE DEVICE PARAMETERS.
Signed-off-by: Lev Kujawski <lkujaw@mailbox.org>
Message-ID: <20221010085229.2431276-2-lkujaw@mailbox.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
-----BEGIN PGP SIGNATURE-----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=WEsU
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYqMhMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uVlD/47U3zYP33y4+wJcRScC0QI
# jYd82jS7GhD5YP5QPrIEMaSbDwtYGi4Rez1taaHvZ2fWLg2gE973iixmTaM2mXCd
# xPEqMsRXkFrQnC89K5/v9uR04AvHxoM8J2mD2OKnUT0RVBs38WxCUMLETBsD18/q
# obs1RzDRhEs5BnwwPMm5HI1iQeVvDRe/39O3w3rZfA8DuqerrNOQWuJd43asHYjO
# Gc1QzCGhALlXDoqk11IzjhJ7es8WbJ5XGvrSNe9QLGNJwNsu9oi1Ez+5WK2Eht9r
# eRvGNFjH4kQY1YCShZjhWpdzU9KT0+80KLirMJFcI3vUztrYZ027/rMyKLHVOybw
# YAqgEUELwoGVzacpaJg73f77uknKoXrfTH25DfoLX0yFCB35JHOPcjU4Uq1z1pfV
# I80ZcJBDJ95mXPfyKLrO+0IyVBztLybufedK2aiH16waEGDpgsJv66FB2QRuQBYW
# O0i6/4DEUZmfSpOmr8ct+julz7wCWSjbvo6JFWxzzxvD0M5T3AFKXZI244g1SMdh
# LS8V7WVCVzVJ5mK8Ujp2fVaIIxiBzlXVZrQftWv5rhyDOiIIeP8pdekmPlI6p5HK
# 3/2efzSYNL2UCDZToIq24El/3md/7vHR6DBfBT1/pagxWUstqqLgkJO42jQtTG0E
# JY1cZ/EQY7cqXGrww8lhWA==
# =WEsU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:36:03 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm: (37 commits)
tests/qtest: Add tests for the STM32L4x5 USART
hw/arm: Add the USART to the stm32l4x5 SoC
hw/char/stm32l4x5_usart: Add options for serial parameters setting
hw/char/stm32l4x5_usart: Enable serial read and write
hw/char: Implement STM32L4x5 USART skeleton
reset: Add RESET_TYPE_SNAPSHOT_LOAD
docs/devel/reset: Update to new API for hold and exit phase methods
hw, target: Add ResetType argument to hold and exit phase methods
scripts/coccinelle: New script to add ResetType to hold and exit phases
allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset
hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr
linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
hw/dma: avoid apparent overflow in soc_dma_set_request
hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI
target/arm: Add FEAT_NMI to max
hw/intc/arm_gicv3: Report the VINMI interrupt
hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update()
hw/intc/arm_gicv3: Implement NMI interrupt priority
hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()
hw/intc/arm_gicv3: Add NMI handling CPU interface registers
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been running this test for almost a year; it
is safe to remove its debug statements, which clutter
CI jobs output:
▶ 88/100 /nested-aio-poll OK
io_read 0x16bb26158
io_poll_true 0x16bb26158
> io_poll_ready
io_read 0x16bb26164
< io_poll_ready
io_poll_true 0x16bb26158
io_poll_false 0x16bb26164
> io_poll_ready
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_read 0x16bb26164
< io_poll_ready
88/100 qemu:unit / test-nested-aio-poll OK
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240422112246.83812-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test:
- read/write from/to the usart registers
- send/receive a character/string over the serial port
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-6-arnaud.minier@telecom-paris.fr
[PMM: fix checkpatch nits, remove commented out code]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To control that creating new machine type doesn't affect the previous
types (their compat_props) and to check complex compat_props inheritance
we need qmp command to print machine type compatibility properties.
This patch adds the ability to get list of all the compat_props of the
corresponding supported machines for their comparison via new optional
argument of "query-machines" command. Since information on compatibility
properties can increase the command output by a factor of 40, add an
argument to enable it, default off.
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240318213550.155573-3-davydov-max@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
RHEL 9 (and thus also the derivatives) have been available since two
years now, so according to QEMU's support policy, we can drop the active
support for the previous major version 8 now.
Another reason for doing this is that Centos Stream 8 will go EOL soon:
https://blog.centos.org/2023/04/end-dates-are-coming-for-centos-stream-8-and-centos-linux-7/
"After May 31, 2024, CentOS Stream 8 will be archived
and no further updates will be provided."
Thus upgrade our CentOS Stream container to major version 9 now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This update adds the removing of the EXTERNALLY-MANAGED marker files
that has been added to the lcitool recently.
Quoting Daniel:
"For those who don't know, python now commonly blocks the ability to
run 'pip install' outside of a venv. This generally makes sense for
a precious installation environment. Our containers are disposable
though, so a venv has no benefit. Removing the 'EXTERNALLY-MANAGED'
allows the historical arbitrary use of 'pip' outside a venv.
lcitool just does this unconditionally given the containers are
not precious."
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We need the latest fixes for the lcitool to be able to properly
update our CentOS docker file to CentOS Stream 9.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since Ubuntu 22.04 has now been available for more than two years, we
can stop actively supporting the previous LTS version of Ubuntu now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240418101056.302103-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The messages for assertions using hexadecimal numbers will be
easier to understand with `g_assert_cmphex`.
Cases changed : "cmpuint.*0x", "cmpuint.*<<"
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-ID: <20240414173349.31194-1-ines.varhol@telecom-paris.fr>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
- Het's new test cases for "channels"
- Het's fix for a typo for vsock parsing
- Cedric's VFIO error report series
- Cedric's one more patch for dirty-bitmap error reports
- Zhijian's rdma deprecation patch
- Yuan's zeropage optimization to fix double faults on anon mem
- Zhijian's COLO fix on a crash
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZig4HxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbQiwD/V5nSJzSuAG4Ra1Fjo+LRG2TT6qk8eNCi
fIytehSw6cYA/0wqarxOF0tr7ikeyhtG3w4xFf44kk6KcPkoVSl1tqoL
=pJmQ
-----END PGP SIGNATURE-----
Merge tag 'migration-20240423-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull for 9.1
- Het's new test cases for "channels"
- Het's fix for a typo for vsock parsing
- Cedric's VFIO error report series
- Cedric's one more patch for dirty-bitmap error reports
- Zhijian's rdma deprecation patch
- Yuan's zeropage optimization to fix double faults on anon mem
- Zhijian's COLO fix on a crash
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZig4HxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbQiwD/V5nSJzSuAG4Ra1Fjo+LRG2TT6qk8eNCi
# fIytehSw6cYA/0wqarxOF0tr7ikeyhtG3w4xFf44kk6KcPkoVSl1tqoL
# =pJmQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 03:37:19 PM PDT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240423-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration/colo: Fix bdrv_graph_rdlock_main_loop: Assertion `!qemu_in_coroutine()' failed.
migration/multifd: solve zero page causing multiple page faults
migration: Add Error** argument to add_bitmaps_to_list()
migration: Modify ram_init_bitmaps() to report dirty tracking errors
migration: Add Error** argument to xbzrle_init()
migration: Add Error** argument to ram_state_init()
memory: Add Error** argument to the global_dirty_log routines
migration: Introduce ram_bitmaps_destroy()
memory: Add Error** argument to .log_global_start() handler
migration: Add Error** argument to .load_setup() handler
migration: Add Error** argument to .save_setup() handler
migration: Add Error** argument to qemu_savevm_state_setup()
migration: Add Error** argument to vmstate_save()
migration: Always report an error in ram_save_setup()
migration: Always report an error in block_save_setup()
vfio: Always report an error in vfio_save_setup()
s390/stattrib: Add Error** argument to set_migrationmode() handler
tests/qtest/migration: Fix typo for vsock in SocketAddress_to_str
tests/qtest/migration: Add negative tests to validate migration QAPIs
tests/qtest/migration: Add multifd_tcp_plain test using list of channels instead of uri
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migration QAPI arguments - uri and channels are mutually exhaustive.
Add negative validation tests, one with both arguments present and
one with none present.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-9-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a positive test to check multifd live migration but this time
using list of channels (restricted to 1) as the starting point
instead of simple uri string.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-8-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Alter migrate_qmp() to allow use of channels parameter, but only
fill the uri with correct port number if there are no channels.
Here we don't want to allow the wrong cases of having both or
none (ex: migrate_qmp_fail).
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-7-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
migrate_get_connect_qdict gets qdict with the dst QEMU parameters.
migrate_set_ports() from list of channels reads each QDict for port,
and fills the port with correct value in case it was 0 in the test.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-6-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Alter migrate_qmp_fail() to allow both uri and channels
independently. For channels, convert string to a Dict.
No dealing with migrate_get_socket_address() here because
we will fail before starting the migration anyway.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-5-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Refactor migrate_get_socket_address to internally utilize 'socket-address'
parameter, reducing redundancy in the function definition.
migrate_get_socket_address implicitly converts SocketAddress into str.
Move migrate_get_socket_address inside migrate_get_connect_uri which
should return the uri string instead.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-4-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Move the calls to migrate_get_socket_address() into migrate_qmp().
Get rid of connect_uri and replace it with args->connect_uri only
because 'to' object will help to generate connect_uri with the
correct port number.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-3-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add the 'to' object into migrate_qmp(), so we can use
migrate_get_socket_address() inside migrate_qmp() to get
the port value. This is not applied to other migrate_qmp*
because they don't need the port.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-2-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
