Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1446203414-4013-12-git-send-email-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1446203414-4013-11-git-send-email-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1446203414-4013-10-git-send-email-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1446203414-4013-9-git-send-email-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1446203414-4013-8-git-send-email-kraxel@redhat.com
commit e0d03b8ceb converted VNC startup to use SocketAddress,
the interface socket_listen don't have a port_offset param, so
we need to add the port offset (5900) to both 'port' and 'to' opts.
currently only 'port' is added by offset.
This patch add the port offset to 'to' opts.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1445926252-14830-1-git-send-email-hongyang.yang@easystack.cn
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I have observed that depending on the contents and the encoding it happens
that sending data as RAW sometimes would take less space than the encoded data.
This is especially the case for small updates or areas with high color images.
If sending RAW encoded data is beneficial allow a fall back to RAW encoding
for the framebuffer update.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Current KEY_NPAGE/KEY_PPAGE handling is broken on -curses. Those uses
"GREY", but "KEY_MASK" masked out "GREY".
To fix, we have to use correct mask value - SCANCODE_KEYMASK.
Then, this adds support of "shift + pageup/pagedown". With this,
-curses mode can use scroll-up/down as usual like other display modes.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This converts vga code to curses code in console_write_bh().
With this changes, we can see line graphics (for example, dialog uses)
correctly.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If TERM=xterm-256color, COLOR_PAIRS==256 and monitor passes chtype
like 0x74xx. Then, the code uses uninitialized color pair. As result,
monitor uses black for both of fg and bg color, i.e. terminal is
filled by black.
To fix, this initialize above than 64 with default color (fg=white,bg=black).
FIXME: on 256 color, curses may be possible better vga color emulation.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for input-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-20-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for socket-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-17-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than storing a base class as a pointer to a box, just
store the fields of that base class in the same order, so that
a child struct can be directly cast to its parent. This gives
less malloc overhead, less pointer dereferencing, and even less
generated code. Compare to the earlier commit 1e6c1616a "qapi:
Generate a nicer struct for flat unions" (although that patch
had fewer places to change, as less of qemu was directly using
qapi structs for flat unions). It also allows us to turn on
automatic type-safe wrappers for upcasting to the base class
of a struct.
Changes to the generated code look like this in qapi-types.h:
| struct SpiceChannel {
|- SpiceBasicInfo *base;
|+ /* Members inherited from SpiceBasicInfo: */
|+ char *host;
|+ char *port;
|+ NetworkAddressFamily family;
|+ /* Own members: */
| int64_t connection_id;
as well as additional upcast functions like qapi_SpiceChannel_base().
Meanwhile, changes to qapi-visit.c look like:
| static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp)
| {
| Error *err = NULL;
|
|- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err);
|+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err);
| if (err) {
(the cast is necessary, since our upcast wrappers only deal with a
single pointer, not pointer-to-pointer); plus the wholesale
elimination of some now-unused visit_type_implicit_FOO() functions.
Without boxing, the corner case of one empty struct having
another empty struct as its base type now requires inserting a
dummy member (previously, the 'Base *base' member sufficed).
And now that we no longer consume a 'base' member in the generated
C struct, we can delete the former negative struct-base-clash-base
test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A future qapi patch will rework generated structs with a base
class to be unboxed. In preparation for that, change the code
that allocates then populates an info struct to instead merely
populate the fields of an info field passed in as a parameter
(renaming vnc_basic_info_get* to vnc_init_basic_info*). Add
rudimentary Error handling at the lowest levels for cases
where the old code returned NULL; but rather than plumb Error
all the way through the stack, the callers drop the error and
return NULL as before.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The Buffer code in the VNC server is useful for the IO channel
code, so pull it out into a shared module, QIOBuffer.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VNC code is currently using QemuOpts to configure the
sockets connections / listeners it needs. Convert it to
use SocketAddress to bring it in line with modern QAPI
based code elsewhere in QEMU.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* Support for Linux 4.4's new Hyper-V features
* Eliminate g_slice from areas I maintain
* checkpatch fix
* Peter's cpu_reload_memory_map() cleanups
* More changes to MAINTAINERS
* Require Python 2.6
* chardev creation fixes
* PCI requester id for ARM KVM
* cleanups and doc fixes
* Allow customization of the Hyper-V vendor id
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWJKYWAAoJEL/70l94x66D2yYH/Rw06gj9FFVEhfNODmJozCsK
zRqRREo+VMo/lIGUSwzI+OCX+yUoivxnsJXchqunK0udPuQ5vZ+mVGyKedg8/SU+
uqXzXMK7QgJK/w7qNA1n0OacNYSosZz9MpOwPgzSLPRda8FbtVKqPBOugSEs+Ymg
APtiumz3DGWXUmt+vqRdgdiAvoGkefPODjjPjfSQFukg205KR88tf/b9oN8Z+kDW
LtGqG9dUNS/60ulLNQdFInn3x5WpuGky5kk57f47QHpInNcN4/CH0BiguvYNkA9A
aFFEWj5RsK7xkhcwSw6JIaSoWoTdrQVd4mB6+WTZN4tfGIIaoDeI6fp2MFmVpZU=
=9Tf9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* KVM page size fix for PPC
* Support for Linux 4.4's new Hyper-V features
* Eliminate g_slice from areas I maintain
* checkpatch fix
* Peter's cpu_reload_memory_map() cleanups
* More changes to MAINTAINERS
* Require Python 2.6
* chardev creation fixes
* PCI requester id for ARM KVM
* cleanups and doc fixes
* Allow customization of the Hyper-V vendor id
# gpg: Signature made Mon 19 Oct 2015 09:13:10 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (49 commits)
kvm: Allow the Hyper-V vendor ID to be specified
kvm: Move x86-specific functions into target-i386/kvm.c
kvm: Pass PCI device pointer to MSI routing functions
hw/pci: Introduce pci_requester_id()
kvm: Make KVM_CAP_SIGNAL_MSI globally available
doc/rcu: fix g_free_rcu() usage example
qemu-char: cleanup after completed conversion to cd->create
qemu-char: convert ringbuf backend to data-driven creation
qemu-char: convert vc backend to data-driven creation
qemu-char: convert spice backend to data-driven creation
qemu-char: convert console backend to data-driven creation
qemu-char: convert stdio backend to data-driven creation
qemu-char: convert testdev backend to data-driven creation
qemu-char: convert braille backend to data-driven creation
qemu-char: convert msmouse backend to data-driven creation
qemu-char: convert mux backend to data-driven creation
qemu-char: convert null backend to data-driven creation
qemu-char: convert pty backend to data-driven creation
qemu-char: convert UDP backend to data-driven creation
qemu-char: convert socket backend to data-driven creation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mouse cursor can become blinky when being moved a lot. This patch fixes that
problem by issuing the redraw sooner.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: AAA87DD7-EC20-4F4B-B71E-C38461D9FCBA@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eliminate this warning associated with the addRemovableDevicesMenuItems()
function:
ui/cocoa.m:1344:13: warning: function declaration isn't a prototype
[-Wstrict-prototypes]
static void addRemovableDevicesMenuItems()
^
ui/cocoa.m: In function 'addRemovableDevicesMenuItems':
ui/cocoa.m:1344:13: warning: old-style function definition [-Wold-style-definition]
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 7B365FC2-072B-4E8D-A1D9-922C2D691A83@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Having creation as a member of the CharDriver struct removes the need
to export functions for qemu-char.c's usage. After the conversion,
chardev backends implemented outside qemu-char.c will not need a stub
creation function anymore.
Ultimately all drivers will be converted. For now, support the case
where cd->create == NULL.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eliminate this warning associated with the setting of the normalWindow's title:
ui/cocoa.m: In function '-[QemuCocoaAppController init]':
ui/cocoa.m:888:9: warning: format not a string literal and no format arguments
[-Wformat-security]
[normalWindow setTitle:[NSString stringWithFormat:@"QEMU"]];
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 57057D6E-C108-4AE1-8370-E7E6855B2F2C@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows virtio-gpu to render in 3d mode.
Uses native opengl support which is present
in gtk versions 3.16 and newer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows virtio-gpu to render in 3d mode.
Uses egl, for gtk versions 3.14 and older.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Optimizing updates by copying the dirty rectangle
only do not work because of double-buffering.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create a buffer for the vertex data and place vertexes
there at initialization time. Then just use the buffer
for each texture blit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Removes the open dialog code that runs when no arguments are supplied with QEMU.
Not everyone needs a hard drive or cdrom to boot their target. A user might only
need to use their target's bios to do work. With that said, this patch removes
the unneeded open dialog code.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 33856864-321C-4367-9170-FB0BF81E789B@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the user puts QEMU in the background while holding
down a key, QEMU will not receive the keyup event when
the user lets go of the key. When the user goes back to
QEMU, QEMU will think the key is still down causing
stuck key symptoms. This patch fixes this problem by
releasing all down keys when QEMU goes into the
background.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 7A3FA6EE-84C8-4422-A786-C899B7229D32@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch prevents the user from accidentally quitting QEMU by pushing
Command-Q or by pushing the close button on the main window. When
the user does one of these two things, a dialog box appears verifying
with the user if he or she wants to quit QEMU.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 29169A74-0347-47F5-934F-A5AD24C225CA@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When building for Mingw64 target on Fedora 22 a warning
is issued about _WIN32_WINNT being redefined.
In file included from ui/gtk.c:40:0:
include/ui/gtk.h:5:0: warning: "_WIN32_WINNT" redefined
# define _WIN32_WINNT 0x0601 /* needed to get definition of MAPVK_VK_TO_VSC */
^
In file included from /usr/i686-w64-mingw32/sys-root/mingw/include/crtdefs.h:10:0,
from /usr/i686-w64-mingw32/sys-root/mingw/include/stdio.h:9,
from /home/berrange/src/virt/qemu/include/qemu/fprintf-fn.h:12,
from /home/berrange/src/virt/qemu/include/qemu-common.h:18,
from ui/gtk.c:37:
/usr/i686-w64-mingw32/sys-root/mingw/include/_mingw.h:225:0: note: this is the location of the previous definition
#define _WIN32_WINNT 0x502
^
Rather than try to get MAPVK_VK_TO_VSC defined indirectly
by defining _WIN32_WINNT, instead just define it explicitly
if missing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Commit "555e72f spice: rework mirror allocation, add no-resize fast path"
adds a fast path for surface switches which does't go through the full
primary surface destroy and re-recreation in case the new surface is
identical to the old one (page-flip). It checks the size only though,
but the format must be identical too. This patch adds the format check.
Commit "0002a51 ui/spice: Support shared surface for most pixman
formats" increases the chance to actually trigger this.
https://bugzilla.redhat.com/show_bug.cgi?id=1247479
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Do not open a Cocoa window when another display is selected that will be
initialized later. The Cocoa display cannot be selected with -display,
so there is no need to check its argument.
Signed-off-by: Rainer Müller <raimue@codingfarm.de>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
Message-id: 1441807710-25431-1-git-send-email-raimue@codingfarm.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6TWk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/vnc-crypto-v9-for-upstream' into staging
Merge vnc-crypto-v9
# gpg: Signature made Tue 15 Sep 2015 15:32:38 BST using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/vnc-crypto-v9-for-upstream:
ui: convert VNC server to use QCryptoTLSSession
ui: fix return type for VNC I/O functions to be ssize_t
crypto: introduce new module for handling TLS sessions
crypto: add sanity checking of TLS x509 credentials
crypto: introduce new module for TLS x509 credentials
crypto: introduce new module for TLS anonymous credentials
crypto: introduce new base module for TLS credentials
qom: allow QOM to be linked into tools binaries
crypto: move crypto objects out of libqemuutil.la
tests: remove repetition in unit test object deps
qapi: allow override of default enum prefix naming
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch VNC server over to using the QCryptoTLSSession object
for the TLS session. This removes the direct use of gnutls
from the VNC server code. It also removes most knowledge
about TLS certificate handling from the VNC server code.
This has the nice effect that all the CONFIG_VNC_TLS
conditionals go away and the user gets an actual error
message when requesting TLS instead of it being silently
ignored.
With this change, the existing configuration options for
enabling TLS with -vnc are deprecated.
Old syntax for anon-DH credentials:
-vnc hostname:0,tls
New syntax:
-object tls-creds-anon,id=tls0,endpoint=server \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, no client certs:
-vnc hostname:0,tls,x509=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, requiring client certs:
-vnc hostname:0,tls,x509verify=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \
-vnc hostname:0,tls-creds=tls0
This aligns VNC with the way TLS credentials are to be
configured in the future for chardev, nbd and migration
backends. It also has the benefit that the same TLS
credentials can be shared across multiple VNC server
instances, if desired.
If someone uses the deprecated syntax, it will internally
result in the creation of a 'tls-creds' object with an ID
based on the VNC server ID. This allows backwards compat
with the CLI syntax, while still deleting all the original
TLS code from the VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Various VNC server I/O functions return 'long' and then
also pass this to a method accepting 'int'. All these
should be ssize_t to match the signature of read/write
APIs and thus avoid potential for integer truncation /
wraparound.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The QEMU code is not internationalized and assumes that it runs under
the C locale, but if we use the GTK+ UI we'll end up importing the
locale settings from the environment. This can break things, such as
the JSON generator and iotest 120 in locales that use a decimal comma.
We do however have translations for a few simple strings for the GTK+
menu items, so in order to run QEMU using the C locale, and yet have a
translated UI let's use setlocale() for LC_MESSAGES only.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kick off all grabbing logic from fullscreen mode. In the current state
it seems to create more problems than it solves. Try running qemu/gtk
fullscreen on one head of a multihead host for example ...
There probably was a reason the grab-on-fullscreen logic was added in
the first place. So please test and report any issues so we can try to
find a sane way to handle it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
free_scale field tracks zoom-fit menu toggle state,
so we should keep them in sync ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add a reason to grab calls and trace points,
so it is easier to debug grab related ui issues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Then we don't have to pair the grab/ungrab calls with update_caption
calls any more because things happen automatically ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If a grab is already active for our window, do nothing.
If a grab is already active for another window, release it.
Cleanup some checks and ungrab calls in the code which are
not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The _cmp_bytes variable added by commit "bea60dd ui/vnc: fix potential
memory corruption issues" can become negative. Result is (possibly
exploitable) memory corruption. Reason for that is it uses the stride
instead of bytes per scanline to apply limits.
For the server surface is is actually fine. vnc creates that itself,
there is never any padding and thus scanline length always equals stride.
For the guest surface scanline length and stride are typically identical
too, but it doesn't has to be that way. So add and use a new variable
(guest_ll) for the guest scanline length. Also rename min_stride to
line_bytes to make more clear what it actually is. Finally sprinkle
in an assert() to make sure we never use a negative _cmp_bytes again.
Reported-by: 范祚至(库特) <zuozhi.fzz@alibaba-inc.com>
Reviewed-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If vnc's password is configured, it will leak memory
which cipher variable pointed on every vnc connection.
Cc: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1437556133-11268-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 800567a61 updated the code to the generic crypto API
and mixed up encrypt and decrypt functions in
procotol_client_auth_vnc.
(Used to be: deskey(key, EN0) which encrypts, and was
changed to qcrypto_cipher_decrypt in 800567a61.)
Changed it to qcrypto_cipher_encrypt now.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Switch the VNC server over to use the generic cipher API, this
allows it to use the pluggable DES implementations, instead of
being hardcoded to use QEMU's built-in impl.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-11-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the direct use of gnutls for hash processing in the
websockets code, in favour of using the crypto APIs. This
allows the websockets code to be built unconditionally
removing countless conditional checks from the VNC code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-9-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To prepare for a generic internal cipher API, move the
built-in D3DES implementation into the crypto/ directory.
This is not in fact a normal D3DES implementation, it is
D3DES with double & triple length modes removed, and the
key bytes in reversed bit order. IOW it is crippled
specifically for the "benefit" of RFB, so call the new
files desrfb.c instead of d3des.c to make it clear that
it isn't a generally useful impl.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code. Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left. Eliminate it with this
coccinelle semantic patch:
@@
expression EP, E;
@@
-error_set(EP, QERR_DEVICE_NOT_FOUND, E)
+error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Adds all removable devices to the Machine menu as a Change and Eject menu
item pair. ide-cd0 would have a "Change ide-cd0..." and "Eject ide-cd0"
menu items.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add "Reset" and "Power Down" menu items to Machine menu.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Machine menu to the Macintosh interface with pause
and resume menu items. These items can either pause or
resume execution of the guest operating system.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 6D7AE6AA-0595-4FAD-AACF-9DFAB87248F0@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although it is pretty unusual the stride for the guest image and the
mirror image maintained by spice-display can be different. So use
separate variables for them.
https://bugzilla.redhat.com/show_bug.cgi?id=1163047
Cc: qemu-stable@nongnu.org
Reported-by: perrier vincent <clownix@clownix.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Ctrl-Alt-u keyboard shortcut restores the screen to its original
size. In the SDL2 UI this is done by destroying the window and
creating a new one. The old window emits SDL_WINDOWEVENT_HIDDEN when
it's destroyed, but trying to call SDL_GetWindowFromID() from that
event's window ID returns a null pointer. handle_windowevent() assumes
that the pointer is never null so it results in a crash.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.
The two callers that pass zero could just as well pass one:
* qemu_spice_init()'s callback add_channel() either returns zero or
exit()s.
* config_write_opts()'s callback config_write_opt() always returns
zero.
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
dpy_gfx_update_dirty expects DIRTY_MEMORY_VGA logging to be always on,
but that will not be the case soon. Because it computes the memory
region on the fly for every update (with memory_region_find), it cannot
enable/disable logging by itself.
We could always treat updates as invalidations if dirty logging is
not enabled, assuming that the board will enable logging on the
RAM region that includes the framebuffer.
However, the function is unused, so just drop it.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gdk_cursor_new() has been deprecated in GTK 3.16, it is recommended to
use gdk_cursor_new_for_display() instead, so do that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds opengl rendering support to the gtk ui, using egl.
It's off by default for now, use 'qemu -display gtk,gl=on'
to play with this.
Note that gtk got native opengl support with release 3.16.
There most likely will be a separate implementation for 3.16+,
using the native gtk opengl support. This patch covers older
versions (and for the time being 3.16 too, hopefully without
rendering quirks).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds the two extra brazilian keys to the evdev keymap for
X11. This patch gets the two keys going with the vnc, gtk and sdl1
UIs.
The SDL2 library complains it doesn't know these keys, so the SDL2
library must be fixed before we can update ui/sdl2-keymap.h
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
The brazilian computer keyboard layout has two extra keys (compared to
the usual 105-key intl ps/2 keyboard). This patch makes these two keys
known to qemu.
For historic reasons qemu has two ways to specify a key: A QKeyCode
(name-based) or a number (ps/2 scancode based). Therefore we have to
update multiple places to make new keys known to qemu:
(1) The QKeyCode definition in qapi-schema.json
(2) The QKeyCode <-> number mapping table in ui/input-keymap.c
This patch does just that. With this patch applied you can send those
two keys to the guest using the send-key monitor command.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Skip mm_time updates (in qxl device memory) in case the guest is stopped.
Guest isn't able to look anyway, and it causes problems with migration.
Also make sure the initial state for spice server is stopped.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before:
qemu-system-x86_64: -display vnc=unix:/root/foo.sock: Failed to start VNC server on `(null)': Failed to bind socket to /root/foo.sock: Permission denied
After:
qemu-system-x86_64: -display vnc=unix:/root/foo.sock: Failed to start VNC server: Failed to bind socket to /root/foo.sock: Permission denied
Rather than tweak the string possibly show unix: value as well,
just drop the explicit display reporting. We already get the cli
string in the error message, that should be sufficient.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qemu_acl_init() function has long since stopped being able
to return NULL, since g_malloc will abort on OOM. As such the
checks for NULL were unreachable code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit v2.2.0-1530-ge556032 vnc: switch to inet_listen_opts
bypassed the use of inet_parse in inet_listen, making literal
IPv6 addresses enclosed in brackets fail:
qemu-kvm: -vnc [::1]:0: Failed to start VNC server on `(null)': address
resolution failed for [::1]:5900: Name or service not known
Strip the brackets to make it work again.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add any console that is available to the current emulator as a
menu item under the View menu.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: Adjusted to apply after zoom-to-fit menu item was added;
create the View menu at the same time as all the others, and only
add the dynamically-determined items to it later]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In OSX 10.10, the NSOKButton and NSCancelButton constants are deprecated
and provoke compiler warnings. Avoid them by using the
NSFileHandlingPanelCancelButton and NSFileHandlingPanelOKButton constants
instead. These are the documented correct constants for the 10.6-and-up
beginSheetModalForWindow API we use. We also use the same method for
the pre-10.6 compatibility code path, but conveniently the constant
values are the same and the constant names have been present since 10.0.
Preferring the constant names that match the non-legacy API makes more
sense anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431296361-16981-7-git-send-email-peter.maydell@linaro.org
Our class QemuCocoaAppController implements the NSApplicationDelegate
interface, and we pass an object of this class to [NSApp setDelegate].
However, we weren't declaring in the class definition that we implemented
this interface; in OSX 10.10 this provokes the following (slighly
misleading) warning:
ui/cocoa.m:1031:24: warning: sending 'QemuCocoaAppController *' to parameter of
incompatible type 'id<NSFileManagerDelegate>'
[NSApp setDelegate:appController];
^~~~~~~~~~~~~
/System/Library/Frameworks/Foundation.framework/Headers/NSFileManager.h:109:47:
note: passing argument to parameter 'delegate' here
@property (assign) id <NSFileManagerDelegate> delegate NS_AVAILABLE(10_5,
2_0);
^
Annoyingly, this interface wasn't formally defined until OSX 10.6, so we
have to surround the relevant part of the @interface line with an ifdef.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431296361-16981-5-git-send-email-peter.maydell@linaro.org
The type for openPanelDidEnd's returnCode argument should be NSInteger,
not int. This only matters for the OSX 10.5 code path where we pass
the method directly to an OSX function to call.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431296361-16981-4-git-send-email-peter.maydell@linaro.org
The code that tries to test at both compiletime and runtime
for whether CGImageCreateWithImageInRect is supported provokes
a compile warning on OSX 10.3:
ui/cocoa.m:378:13: warning: comparison of function 'CGImageCreateWithImageInRect'
equal to a null pointer is always false[-Wtautological-pointer-compare]
if (CGImageCreateWithImageInRect == NULL) { // test if "CGImageCreateWithImageInRect" is
supported on host at runtime
^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
The simplest way to deal with this is just to drop this code,
since we don't in practice support OSX 10.4 anyway. (10.5 was
released in 2007 and is the last PPC version, so is the earliest
we really need to continue to support at all.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431296361-16981-2-git-send-email-peter.maydell@linaro.org
This patch makes the -full-screen option actually instruct QEMU to
enter fullscreen at startup, on Mac OS X.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch makes several changes:
- Minimizes distorted full screen display by respecting aspect
ratios.
- Makes full screen mode available on Mac OS 10.7 and higher.
- Allows user to decide if video should be stretched to fill the
screen, using a menu item called "Zoom To Fit".
- Hides the normalWindow so it won't show up in full screen mode.
- Allows user to exit full screen mode.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: minor whitespace tweaks, remove incorrectly duplicated
use of 'f' menu accelerator key]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without that the next mouse motion event uses the old position
as base for relative move calculation, giving wrong results and
making your mouse pointer jump around.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add new sdl2-gl.c file, with display
rendering functions using opengl.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The Spice protocol uses cursor position on hotspot: the client is
applying hotspot offset when drawing the cursor.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Denis Kirjanov is busy getting spice run on ppc64 and trapped into this
one. Spice wire format is little endian, so we have to explicitly say
we want little endian when letting pixman convert the data for us.
Reported-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Live migration with spice works like this today:
(1) client_migrate_info monitor cmd
(2) spice server notifies client, client connects to target host.
(3) qemu waits until spice client connect is finished.
(4) send over vmstate (i.e. main part of live migration).
(5) spice handover to target host.
(3) is implemented by making client_migrate_info a async monitor
command. This is the only async monitor command we have.
The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel. That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.
Time to drop step (3). This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK2 sends the accel key to the guest when switching to the graphic
console via that shortcut. Resolve this by ignoring any keys until the
next key-release event. However, do not ignore keys when switching via
the menu or when on GTK3.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At least on GTK2, the VTE terminal has to be specified as target of
gtk_widget_grab_focus. Otherwise, switching from one VTE terminal to
another causes the focus to get lost.
CC: John Snow <jsnow@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fixed build with CONFIG_VTE=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new function to get a nice label for a given QemuConsole.
Drop the labeling code in gtk.c and use the new function instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This way gtk has text terminal consoles even when building without vte.
Most notably you'll get a monitor tab on windows now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server websockets decoder will read and buffer data from
websockets clients until it sees the end of the HTTP headers,
as indicated by \r\n\r\n. In theory this allows a malicious to
trick QEMU into consuming an arbitrary amount of RAM. In practice,
because QEMU runs g_strstr_len() across the buffered header data,
it will spend increasingly long burning CPU time searching for
the substring match and less & less time reading data. So while
this does cause arbitrary memory growth, the bigger problem is
that QEMU will be burning 100% of available CPU time.
A novnc websockets client typically sends headers of around
512 bytes in length. As such it is reasonable to place a 4096
byte limit on the amount of data buffered while searching for
the end of HTTP headers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The logic for decoding websocket frames wants to fully
decode the frame header and payload, before allowing the
VNC server to see any of the payload data. There is no
size limit on websocket payloads, so this allows a
malicious network client to consume 2^64 bytes in memory
in QEMU. It can trigger this denial of service before
the VNC server even performs any authentication.
The fix is to decode the header, and then incrementally
decode the payload data as it is needed. With this fix
the websocket decoder will allow at most 4k of data to
be buffered before decoding and processing payload.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
[ kraxel: fix frequent spurious disconnects, suggested by Peter Maydell ]
@@ -361,7 +361,7 @@ int vncws_decode_frame_payload(Buffer *input,
- *payload_size = input->offset;
+ *payload_size = *payload_remain;
[ kraxel: fix 32bit build ]
@@ -306,7 +306,7 @@ struct VncState
- uint64_t ws_payload_remain;
+ size_t ws_payload_remain;
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the x509verify option is requested, the VNC websockets server
was failing to validate that the websockets client provided an
x509 certificate matching the ACL rules.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous change to the auth scheme handling guarantees we
can never have nested TLS sessions in the VNC websockets server.
Thus we can remove the separate gnutls_session instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When TLS is required, the primary VNC server considers it to be
mandatory. ie the server admin decides whether or not TLS is used,
and the client has to comply with this decision. The websockets
server, however, treated it as optional, allowing non-TLS clients
to connect to a server which had setup TLS. Thus enabling websockets
lowers the security of the VNC server leaving the admin no way to
enforce use of TLS.
This removes the code that allows non-TLS fallback in the websockets
server, so that if TLS is requested for VNC it is now mandatory for
both the primary VNC server and the websockets VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The way the websockets TLS code was integrated into the VNC server
made it essentially useless. The only time that the websockets TLS
support could be used is if the primary VNC server had its existing
TLS support disabled. ie QEMU had to be launched with:
# qemu -vnc localhost:1,websockets=5902,x509=/path/to/certs
Note the absence of the 'tls' flag. This is already a bug, because
the docs indicate that 'x509' is ignored unless 'tls' is given.
If the primary VNC server had TLS turned on via the 'tls' flag,
then this prevented the websockets TLS support from being used,
because it activates the VeNCrypt auth which would have resulted
in TLS being run over a TLS session. Of course no websockets VNC
client supported VeNCrypt so in practice, since the browser clients
cannot setup a nested TLS session over the main HTTPS connection,
so it would not even get past auth.
This patch causes us to decide our auth scheme separately for the
main VNC server vs the websockets VNC server. We take account of
the fact that if TLS is enabled, then the websockets client will
use https, so setting up VeNCrypt is thus redundant as it would
lead to nested TLS sessions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vnc_display_open method is quite long and complex, so
move the VNC auth scheme decision logic into a separate
method for clarity.
Also update the comment to better describe what we are
trying to achieve.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the VNC server is built without tls, sasl or websocket support
and the user requests one of these features, they are just silently
ignored. This is bad because it means the VNC server ends up running
in a configuration that is less secure than the user asked for.
It also leads to an tangled mass of preprocessor conditionals when
configuring the VNC server.
This ensures that the tls, sasl & websocket options are always
processed and an error is reported back to the user if any of
them were disabled at build time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Handling of VNC audio messages results in printfs to the console.
This is of no use to anyone in production, so should be using the
normal VNC_DEBUG macro instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Error classes are a leftover from the days of "rich" error objects.
New code should always use ERROR_CLASS_GENERIC_ERROR. Commit 1d0d59f
added a use of ERROR_CLASS_DEVICE_NOT_FOUND. Replace it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This happens for example when doing ctrl-alt-u and segfaults
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Put them under a #define similar to the VGA model and make them
actually compile. Add a couple too.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vs->lsock may equal to 0, modify the check condition,
avoid possible vs->lsock leak.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'x509verify' parameter is documented as taking a path to the
x509 certificates, ie the same syntax as the 'x509' parameter.
commit 4db14629c3
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Sep 16 12:33:03 2014 +0200
vnc: switch to QemuOpts, allow multiple servers
caused a regression by turning 'x509verify' into a boolean
parameter instead. This breaks setup from libvirt and is not
consistent with the docs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use inet_listen_opts instead of inet_listen. Allows us to drop some
pointless indirection: Format strings just to parse them again later on.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Nobody cares about those strings, they are only used to check whenever
the vnc server / websocket support is enabled or not. Add bools for
this and drop the strings.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Connecting to VNC through websocket crashes in vnc_flush() when trying
to acquire a mutex that hasn't been initialized (vnc_init_state(vs)
hasn't been called at this point).
Signed-off-by: Jorge Acereda Macia <jacereda@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This way the generated id will be stored in -writeconfig cfg files.
Also we can make vnc_auto_assign_id() local to vnc.c.
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds missing cyrillic character 'numerosign' to the VNC
keysym table, it's needed by Russian keyboard. And I get the keysym from
'<X11/keysymdef.h>', the current keysym table in Qemu was generated from
it.
Signed-off-by: Wang xin <wangxinxin.wang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This function is not used anymore, let's remove it.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove qemu_console_displaystate(), qemu_remove_kbd_event_handler(),
qemu_different_endianness_pixelformat() and cpkey(), since they are
completely unused.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
vnc_display_local_addr will not be called with an invalid display id.
Add assert() to silence coverity warning about a null pointer dereference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
in case we send and update for a complete scanline increment
the y offset to avoid running to find_next_bit for that lines
twice.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add new query vnc qmp command, for the lack of better ideas just name it
"query-vnc-servers". Changes over query-vnc:
* It returns a list of vnc servers, so multiple vnc server instances
are covered.
* Each vnc server returns a list of server sockets. Followup patch
will use that to also report websockets. In case we add support for
multiple server sockets server sockets (to better support ipv4+ipv6
dualstack) we can add them to the list too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also track the number of connections in "connecting" and "shared" state
(in addition to the "exclusive" state). Apply a configurable limit to
these connections.
The logic to apply the limit to connections in "shared" state is pretty
simple: When the limit is reached no new connections are allowed.
The logic to apply the limit to connections in "connecting" state (this
is the state you are in *before* successful authentication) is
slightly different: A new connect kicks out the oldest client which is
still in "connecting" state. This avoids a easy DoS by unauthenticated
users by simply opening connections until the limit is reached.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a display= parameter to the vnc options. This allows to
bind a vnc server instance to a specific display, allowing to create a
multiseat setup with a vnc server for each seat.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch switches vnc over to QemuOpts, and it (more or less
as side effect) allows multiple vnc server instances.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In case the display id is "default" (which is the one you get if you
don't explicitly assign one) we keep the old name scheme, without
display, for backward compatibility reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
DisplayState isn't used anywhere, drop it. Add the vnc server ID as
parameter instead, so it is possible to specify the server instance.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Replace with a vnc_displays list, so we can have multiple vnc server
instances. Add vnc_server_find function to lookup a display by id.
With no id supplied return the first vnc server, for backward
compatibility reasons.
It is not possible (yet) to actually create multiple vnc server
instances.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Teach qemu to set up a Spice server with a UNIX socket using the
following arguments -spice unix,addr=path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At least all the ones I've tested. We make the assumption that
SDL is going to be better at conversion than we are.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ kraxel: minor format tweaks ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At least all the ones I've tested. We make the assumption that
pixman is going to be better at conversion than we are.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ kraxel: just hook up qemu_pixman_check_format ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At least all the ones I've tested. We make the assumption that
pixman is going to be better at conversion than we are.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ kraxel: just hook up qemu_pixman_check_format ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows VGA to decide whether to use a shared surface based on
whether the UI backend supports the format or not. Backends that
don't provide the new callback fallback to native 32 bpp which
is equivalent to what was supported before.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ kraxel: fix console check, allow only 32 bpp as fallback ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In order to remove the logic for detecting supported shared
pixmap formats from device models, make qemu_default_pixman_format()
capable for failing by returning 0 which is not a possible format
value rather than asserting.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Apparently it is possible for X to send an event to a hidden SDL2
window, leading to SDL2 believing it is now shown. SDL2 will pass the
SDL_WINDOWEVENT_SHOWN message to the application without actually
showing the window; the problem is that the next SDL_ShowWindow() will
be a no-op because SDL2 assumes the window is already shown.
The correct way to react to SDL_WINDOWEVENT_SHOWN would be to clear
scon->hidden (analogous for SDL_WINDOWEVENT_HIDDEN). However, due to the
window not actually being shown, this will somehow not be correct after
all.
Therefore, just hide the window on SDL_WINDOWEVENT_SHOWN if it is
supposed to be hidden (and analogous for SDL_WINDOWEVENT_HIDDEN).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SDL_PollEvent() polls events for all windows; therefore,
sdl2_poll_events() will poll the events for all windows and not only for
the one identified by the given sdl2_console.
This should be considered in handle_windowevent(): The window affected
by the event is not necessarily the one identified by the sdl2_console
object given to sdl2_poll_events(), but the one identified by
ev->window.windowID.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that common event handling code is split off, we can move
over sdl_refresh to sdl2-2d.c, and rename it to sdl2_2d_refresh.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create a new function to poll and handle sdl2 events,
which is then just called from the refresh timer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Add a new sdl2_2d_redraw function for a complete screen refresh,
so we can stop using graphic_hw_invalidate for that. There is
no need to bother console / gfx emulation code if we are just
going to re-blit the screen after window resizes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Split do_sdl_resize function (which does alot more than just resizing)
into three: sdl2_window_{create,destroy,resize}.
Fix SDL_Renderer handling: must be guest display size not host window
size, and SDL2 will magically handle all scaling for us.
Make fullscreen actually enter fullscreen mode and simplify the code.
There is no need to store the original window size, the window manager
will do that for us.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create new sdl2-2d file for 2d display rendering.
Move over sdl_update code, and rename to sdl2_2d_update.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Makes quite some keys actually go to the guest instead of
being captured by the host window manager.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create sdl2.h header file, in preparation for sdl2 code splitup.
Populate it with sdl2_console struct (renamed from sdl2_state).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If errors happen for middle items of channel_list,
qmp_query_spice_channels() returns NULL, and the variable
cur_item going out of scope leaks the storage it points to.
The flag is a compatibility thing for older spice-server
versions. Meanwhile our minimum spice version requirement is
new enough that we should never ever see this error, and if we
do something went very seriously wrong. Let's using assert()
instead of returning NULL to avoid a memory leak.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Nothing seems to be using functions from spice-experimental.h (better
that way). Let's remove its inclusion.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is possible to use Spice server without TCP port. On local VM,
qemu (and libvirt) can add new clients thanks to QMP add_client command.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add fast path to qemu_spice_display_switch in case old and new
displaysurface have identical size (happens with display panning
and page flipping). We just swap the backing store then and don't
go through the whole process of deleting and creating the primary
surface.
To simplify the code a bit move mirror surface allocation to
qemu_spice_display_switch().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Calling directly doesn't work due to the qxl-render code running in
spice server thread context. Meanwhile bottom half scheduling is
thread-safe though, so we can use that to kick a cursor update in
main i/o thread context.
Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Compile sdl.c / sdl2.c depending on CONFIG_SDLABI instead of
compiling both and have version #ifdefs in the source code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
It's hard to read because of the confused coding
style in this file. Let's correct it following Qemu
coding style.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Arguments in wrong order (SWAPPED_ARGUMENTS)
The positions of arguments in the call to
tight_fill_palette do not match the ordering of the parameters:
&fg is passed to bg
&bg is passed to fg
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ongoing discussions on how we are going to specify the console,
so tag the command as experiental so we can refine things in
the 2.3 development cycle.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1416923657-10614-1-git-send-email-armbru@redhat.com
[Spell out "not a stable API", and x- the QAPI schema, too]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a crash by just skipping the vte resize hack if cur is NULL.
Reproducer:
qemu-system-x86_64 -nodefaults
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
local_err in gd_vc_gfx_init() is not freed, and we don't use it,
so remove it.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'QemuConsole' is the input source for handler, we share some
input handlers to process the input events from different QemuConsole.
Normally we only have one set of keyboard, mouse, usbtablet, etc.
The devices have different mask, it's fine to just checking mask to
insure that the handler has the ability to process the event.
I saw we try to bind console to handler in usb/dev-hid.c, but display
always isn't available at that time.
If we have multiseat setup (as Gerd said), we only have 'problem' in
this case. Actually event from different devices have the same effect
for system, it's fine to always use the first available handler
without caring about the console.
For send-key command, we just pass a NULL for console parameter in
calling qemu_input_event_send_key(NULL, ..), but 'input-send-event'
needs to care more devices.
Conclusion:
Generally assigning the special console is meanless, and we can't
directly remove the QMP parameter for compatibility.
So we can make the parameter optional. The parameter might be useful
for some special condition: we have multiple devices without binding
console and they all have the ability(mask) to process events, and
we don't want to use the first one.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In fullscreen mode, we attempt to shrink the menubar to 1 pixel in height,
so it takes up as little room as possible while still allowing us to use
the keyboard shortcuts for its various operations.
However this shrinking is disregarded on gtk3, so the entire menu bar is
visible, which isn't very pleasant. This patch hides the menu bar instead.
The side effect is that the only keyboard shortcuts that will work in this
mode are the ones that we explicitly register on the top level window and
not the menu bar. The previous patches changed the fullscreen and vc
shortcuts to work like that, which I think are the only ones that really
matter in for the fullscreen case.
https://bugs.launchpad.net/qemu/+bug/1294898
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
So they are usable when we hide the menubar in upcoming patches. This
has the accelerator text caveat as the fullscreen bit in the previous
patch.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of installing it on the menu. This will be needed to keep the
fullscreen keyboard shortcut working when we hide the menu (in future
patches).
On gtk < 3.8, this has the unfortunate side effect of no longer listing
the key combo in the UI. We could manually change the label in that case,
but it will look visually out of place, and I'm not sure if anyone really
cares.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
graphic_hw_update and vnc_refresh_server_surface aren't
need to do when no vnc client connected. It can reduce
lock contention, because vnc_refresh will hold global big
lock two millisecond every three seconds.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
bits_per_pixel that are less than 8 could result in accessing
non-initialized buffers later in the code due to the expectation
that bytes_per_pixel value that is used to initialize these buffers is
never zero.
To fix this check that bits_per_pixel from the client is one of the
values that the rfb protocol specification allows.
This is CVE-2014-7815.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
[ kraxel: apply codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Special handing of the Pause key. Implemented in a similar way as in
ui/sdl.c.
Signed-off-by: Martin Decky <martin@decky.cz>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this memory leak is introduced by the original
commit 3158a3482b
valgrind out showing:
==14553== 21,459 (72 direct, 21,387 indirect) bytes in 1 blocks are definitely
lost in loss record 8,055 of 8,082
==14553== at 0x4A06BC3: calloc (vg_replace_malloc.c:618)
==14553== by 0x80DBFBC: XkbGetKeyboardByName (in /usr/lib64/libX11.so.6.3.0)
==14553== by 0x40C704: gtk_display_init (gtk.c:1798)
==14553== by 0x1AEDC1: main (vl.c:4480)
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Which allows specification of absolute/relative,
up/down and console parameters.
Suggested by Gerd Hoffman.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 2e377f1730 changed the ordering
of the release events as side effect. Some guests are not happy with
that and don't recognise ctrl-alt-del any more. This patch restores
the old last-pressed first-released behavior.
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a function to allow display emulations to switch the hwops
function pointers. This is useful for devices which have two
completely different operation modes. Typical case is the vga
compatibility mode vs. native mode in qxl and the upcoming
virtio-vga device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes support for the cow file format.
Normally we do not break backwards compatibility but in this case there
is no impact and it is the most logical option. Extraordinary claims
require extraordinary evidence so I will show why removing the cow block
driver is the right thing to do.
The cow file format is the disk image format for Usermode Linux, a way
of running a Linux system in userspace. The performance of UML was
never great and it was hacky, but it enjoyed some popularity before
hardware virtualization support became mainstream.
QEMU's block/cow.c is supposed to read this image file format.
Unfortunately the file format was underspecified:
1. Earlier Linux versions used the MAXPATHLEN constant for the backing
filename field. The value of MAXPATHLEN can change, so Linux
switched to a 4096 literal but QEMU has a 1024 literal.
2. Padding was not used on the header struct (both in the Linux kernel
and in QEMU) so the struct layout varied across architectures. In
particular, i386 and x86_64 were different due to int64_t alignment
differences. Linux now uses __attribute__((packed)), QEMU does not.
Therefore:
1. QEMU cow images do not conform to the Linux cow image file format.
2. cow images cannot be shared between different host architectures.
This means QEMU cow images are useless and QEMU has not had bug reports
from users actually hitting these issues.
Let's get rid of this thing, it serves no purpose and no one will be
affected.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
we currently have the Nagle algorithm enabled for all outgoing VNC updates.
This may delay sensitive updates as mouse movements or typing in the console.
As we currently prepare all data in a buffer and then send as much as we can
disabling the Nagle algorithm should not cause big trouble. Well established
VNC servers like TightVNC set TCP_NODELAY as well.
A regular framebuffer update request generates exactly one framebuffer update
which should be pushed out as fast as possible.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now we have removed the legacy register_char_driver() we can
rename register_char_driver_qapi() to the more obvious and
shorter name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org
Don't call SPICE API directly to set password given in command line, but
use the internal API, saving password for later calls.
This solves losing password when changing expiration in qemu monitor.
https://bugzilla.redhat.com/show_bug.cgi?id=1138639
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we need to, we should use the pixman formats instead but for
now this is unused except in commented out code so take it out
to avoid further confusion about surface endianness.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Helper function for copying data from linebuf to framebuffer using
pixman, possibly converting in case src and dst formats differ.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Calls dpy_gfx_update for all dirty scanlines. Works for
DisplaySurfaces backed by guest memory (i.e. the ones created
using qemu_create_displaysurface_guestmem).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a qemu_create_displaysurface_guestmem helper function.
Works simliar to qemu_create_displaysurface_from, but accepts a
guest address instead of a host pointer and it handles
cpu_physical_memory_{map,unmap} for you.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With this patch the qemu console core stops using PixelFormat and pixman
format codes side-by-side, pixman format code is the primary way to
specify the DisplaySurface format:
* DisplaySurface stops carrying a PixelFormat field.
* qemu_create_displaysurface_from() expects a pixman format now.
Functions to convert PixelFormat to pixman_format_code_t (and back)
exist for those who still use PixelFormat. As PixelFormat allows
easy access to masks and shifts it will probably continue to exist.
[ xenfb added by Benjamin Herrenschmidt ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use the new qemu_pixelformat_from_pixman and qemu_default_pixman_format
functions to reimplement qemu_default_pixelformat
(qemu_different_endianness_pixelformat too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Function to convert pixman format codes to qemu PixelFormat.
[ Benjamin Herrenschmidt: fix BGRA+RGBA shifts ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Related spice-only bug. We have a fixed 16 MB buffer here, being
presented to the spice-server as qxl video memory in case spice is
used with a non-qxl card. It's also used with qxl in vga mode.
When using display resolutions requiring more than 16 MB of memory we
are going to overflow that buffer. In theory the guest can write,
indirectly via spice-server. The spice-server clears the memory after
setting a new video mode though, triggering a segfault in the overflow
case, so qemu crashes before the guest has a chance to do something
evil.
Fix that by switching to dynamic allocation for the buffer.
CVE-2014-3615
Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
imitate nearby code about using '!value' or 'value == NULL'
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We need to remember has_updates for each vnc client. Otherwise it might
happen that vnc_update_client(has_dirty=1) takes the first exit due to
output buffers not being flushed yet and subsequent calls with
has_dirty=0 take the second exit, wrongly assuming there is nothing to
do because the work defered in the first call is ignored.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
If the client asks for !incremental frame updates, it has lost its content
so dirty doesn't matter - it has to see the full frame, so setting force_update
Signed-off-by: Stephan Kulow <coolo@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
(Resending for correct email addresses via MAINTAINERS ...)
In the GTK UI, after changing focus to the qemu monitor Notebook Page,
when restoring focus to the virtual machine page, the keyboard focus is lost
to a hidden GTK widget. Focus can only be restored to the virtual machine by
pressing "tab" or any of the four directional arrow keys.
Clicking in the window or grabbing/ungrabbing input does not restore keyboard
focus to the child widget.
This patch adjusts the Notebook page switching callback to automatically
steal keyboard focus on the Page switch event, so that keyboard input
does not appear to break or disappear after tabbing to the QEMU monitor.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set auth to sasl when sasl is enabled, this makes "info spice" correctly
display sasl auth. Also throw an error in case someone tries to set
a spice password via monitor without auth mode being "spice".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this patch makes the VNC server work correctly if the
server surface and the guest surface have different sizes.
Basically the server surface is adjusted to not exceed VNC_MAX_WIDTH
x VNC_MAX_HEIGHT and additionally the width is rounded up to multiple of
VNC_DIRTY_PIXELS_PER_BIT.
If we have a resolution whose width is not dividable by VNC_DIRTY_PIXELS_PER_BIT
we now get a small black bar on the right of the screen.
If the surface is too big to fit the limits only the upper left area is shown.
On top of that this fixes 2 memory corruption issues:
The first was actually discovered during playing
around with a Windows 7 vServer. During resolution
change in Windows 7 it happens sometimes that Windows
changes to an intermediate resolution where
server_stride % cmp_bytes != 0 (in vnc_refresh_server_surface).
This happens only if width % VNC_DIRTY_PIXELS_PER_BIT != 0.
The second is a theoretical issue, but is maybe exploitable
by the guest. If for some reason the guest surface size is bigger
than VNC_MAX_WIDTH x VNC_MAX_HEIGHT we end up in severe corruption since
this limit is nowhere enforced.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
currently a malicious client could define a payload
size of 2^32 - 1 bytes and send up to that size of
data to the vnc server. The server would allocated
that amount of memory which could easily create an
out of memory condition.
This patch limits the payload size to 1MB max.
Please note that client_cut_text messages are currently
silently ignored.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Honour the -show-cursor command line option (which forces the mouse pointer
to always be displayed even when input is grabbed) in the Cocoa UI backend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-5-git-send-email-peter.maydell@linaro.org
Fix handling of absolute positioning devices, which were basically
unusable for two separate reasons:
(1) as soon as you pressed the left mouse button we would call
CGAssociateMouseAndMouseCursorPosition(FALSE), which means that
the absolute coordinates of the mouse events are never updated
(2) we didn't account for MacOSX coordinate origin being bottom left
rather than top right, and so all the Y values sent to the guest
were inverted
We fix (1) by aligning our behaviour with the SDL UI backend for
absolute devices:
* when the mouse moves into the window we do a grab (which means
hiding the host cursor and sending special keys to the guest)
* when the mouse moves out of the window we un-grab
and fix (2) by doing the correct transformation in the call to
qemu_input_queue_abs().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-4-git-send-email-peter.maydell@linaro.org
Add a utility method to check whether a point is within the current window
bounds, and use it in the various places in the mouse handling code that
were opencoding the check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-3-git-send-email-peter.maydell@linaro.org
Do the recalculation of the content dimensions in switchSurface if the
current cdx is zero as well as if the new surface is a different size to
the current window. This catches the case where the first surface registered
happens to be 640x480 (our current window size), and fixes a bug where we
would always display a black screen until the first surface of a different
size was registered.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-2-git-send-email-peter.maydell@linaro.org
The next patch will modify this function to initialize state that is
common to all backends.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
SPICE_INITIALIZED, SPICE_CONNECTED, SPICE_DISCONNECTED and
SPICE_MIGRATE_COMPLETED are converted in one patch, since they
use some common functions. inet_strfamily() is removed since no
callers exist anymore.
Note that there is no existing doc for SPICE_MIGRATE_COMPLETED
in docs/qmp/qmp-events.txt before this patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since VNC_CONNECTED, VNC_DISCONNECTED, VNC_INITIALIZED share some
common functions, convert them in one patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Bug was added by 38ee14f4f3.
vnc_jobs_join call is missing in one code path.
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
So you'll have a mouse pointer when running non-qxl gfx cards with
mouse pointer support (virtio-gpu, IIRC vmware too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make configure detect gtk x11 backend and link libX11 then. Make
gtk backend specific code properly #ifdef'ed on the GTK_WINDOWING_*
backends at runtime). Our gtk ui code should build and run fine on
any platform now.
This also fixes the linker failute due to the new XkbGetKeyboard call
added by commit 3158a3482b.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Current code silently changes the authentication settings
in case you try to set a password without password authentication
turned on. This is bad. Return an error instead.
If we want allow changing auth settings at runtime this should
be done explicitly using a separate monitor command, not as
side effect of set_passwd.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add function to bind input devices to display devices. Implementing
input routing on top of this: Events coming from the display device in
question are routed to the input device bound to it (if there is one).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without the mask, control bits are passed on in the keycode, generating
incorrect PS/2 sequences when SHIFT, ALT, etc are held down.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andrew Oates <andrew@aoates.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Major overhaul for window size handling. This basically switches qemu
over to use geometry hints for the window manager instead of trying to
get the job done with widget resize requests. This allows to specify
better what we need and also avoids window resizes.
FIXME: on gtk2 someone overwrites the geometry hints :(
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently only evdev keycodes are handled by the gtk-ui. SDL has
code to handle both. This patch adds similar processing so that
both keycode types will be handled via the gtk-ui.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's pointless. With grab on hover enabled the keyboard grab
is already active when you press Ctrl-Alt-G ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"View->Detach tab" will move to tab to a new window.
Simply closing the window will move it back into a notebook tab.
The label will be permamently stored in VirtualConsole->label,
so it can easily be reused to (re-)label tabs and windows.
Works for vte tabs only for now. pointer/kbd grab code needs
adaptions before we can enable it for gfx tabs too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simply ask for a small window size. When the widgets don't fit in gtk
will automatically make the window large enougth to make things fit, no
need to try (and fail) duplicate that logic in qemu.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Each display gets its own tab. Tab switching continues to work like it
did, just the hotkeys of the vte consoles changes in case a secondary
display is present as it will get ctrl-alt-2 assigned and the vtes are
shifted by one.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Only show the scrollbar if the content doesn't fit on the visible space.
[ kraxel: fix box packing ]
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vte tabs simply get the size of the vga tab then, with whatever
cols and lines are fitting in. I find this bahavior more useful than
resizing the qemu window all day long.
YMMV. Comments are welcome.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vte widget implements the scrollable interface, placing it into
a scrolled window is pointless and creates a bunch of strange effects.
Zap it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Have a global timer. Update all visible terminal windows syncronously.
Right now this can be the active_console only, but that will change
soon. The global timer will disable itself if not needed, so we only
have to care start it if needed. Which might be at console switch time
or when a new displaychangelistener is registered.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These days each QemuConsole has its own private DisplaySurface,
so we can simply render updates all the time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that we have a function to create a fancy DisplaySurface with a
message for the user, to handle non-existing graphics hardware, we
can make it more generic and use it for other things too.
This patch adds a text line to the in initial DisplaySurface, notifying
the user that the display isn't initialized yet by the guest.
You can see this in action when starting qemu with '-S'. Also when
booting ovmf in qemu (which needs a few moments to initialize itself
before it initializes the vga).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All defined properties of QemuConsole are mandatory and no access to them
should fail. Nevertheless not checking returned errors is bad because in case
of unexpected failure it will hide the bug and cause a memory leak.
Abort in case of unexpected property access errors. This change exposed a bug
where an attempt was made to write to a read-only property "head".
Set "head" property's value at creation time and do not attempt to change it
later. This fixes the bug mentioned above.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With sparc keyboard going directly from QKeyValue to sparc keycodes
this should not be needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Current Makefile system allows using foo.o-cflags variables to store
object-specific CFLAGS. Convert some usages of old syntax
(using QEMU_CFLAGS += construct) to the new syntax.
Do not touch multifile modules for now, as build system isn't ready for this.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only notify spice-server about migration events in case we got
target host information beforehand. So we kick the seamless spice
client migration only in case a actual live migration happens, not
when libvirt uses live-migration-to-file for snapshotting.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In case no listening address was specified, "info spice" reports
"0.0.0.0" as address. Which is incorrect in case spice is listening
on ipv6. Replace it by a wildcard "*" to indicate it is not limited
to a specific address.
Note: Being more specific is not possible without extending the
spice-server api. The socket is handled by spice-server not
qemu, so qemu can't easily figure the actual socket address.
Reported-by: David Jaša <djasa@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There was already a forward declaration using 'static',
but the attribute was missing in the implementation.
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In SDL2, wheel movement is its own event, not a button event. Wire
it up similar to gtk.c
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allows you to resize the sdl2 window and have the guest notice.
[ kraxel: zero-initialize QemuUIInfo ]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When keyboard focus is grabbed, current qemu wants to pass every
keypress to the VM, unless the user is pressing a UI accelerator.
That's exactly how things work without any of the fancy handling. Drop
the special handling, which seems to trigger accelerators twice on gtk3.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Try kicking off a rhel5 text install over serial, the text menu navigation
is all messed up, and some of the kernel boot messages are randomly
corrupted.
Drop use of a pty and just use vte infrastructure for reading and writing.
This fixes the above corruption, and is simpler to boot.
(I don't know what was wrong with the original code though. FWIW this is
what virt-manager has done for years).
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using the standard ctrl+q makes it too easy to kill the whole VM. Using
ctrl+alt+FOO is consistent with our other accelerators.
https://bugzilla.redhat.com/show_bug.cgi?id=1062393
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stock items are deprecated. As are ImageMenuItems. Convert everything to
text only MenuItems, with the same text content as mentioned in the
conversion guide:
https://docs.google.com/spreadsheet/pub?key=0AsPAM3pPwxagdGF4THNMMUpjUW5xMXZfdUNzMXhEa2c&output=html
gtk2 users lose their menu icons as well, but I don't think that's enough
of a problem to warrant keeping around back compat code.
Example error:
ui/gtk.c:1328:5: error: ‘GtkStock’ is deprecated [-Werror=deprecated-declarations]
ui/gtk.c:1335:5: error: ‘gtk_image_menu_item_new_from_stock’ is deprecated (declared at /usr/include/gtk-3.0/gtk/deprecated/gtkimagemenuitem.h:78): Use 'gtk_menu_item_new' instead [-Werror=deprecated-declarations]
s->zoom_out_item = gtk_image_menu_item_new_from_stock(GTK_STOCK_ZOOM_OUT, NULL);
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guard this with a VTE version check, since I'm not sure if this is backwards
compatible.
ui/gtk.c: In function ‘gd_vc_init’:
ui/gtk.c:1176:5: error: ‘vte_terminal_get_adjustment’ is deprecated (declared at /usr/include/vte-2.90/vte/vtedeprecated.h:101) [-Werror=deprecated-declarations]
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In these cases we weren't using an image in the menu item anyways, so
just do as the suggestion says. Should be fine for all qemu supported
gtk versions.
ui/gtk.c: In function ‘gd_create_menu_machine’:
ui/gtk.c:1284:5: error: ‘gtk_image_menu_item_new_with_mnemonic’ is deprecated (declared at /usr/include/gtk-3.0/gtk/deprecated/gtkimagemenuitem.h:76): Use 'gtk_menu_item_new_with_mnemonic' instead [-Werror=deprecated-declarations]
s->reset_item = gtk_image_menu_item_new_with_mnemonic(_("_Reset"));
^
ui/gtk.c:1287:5: error: ‘gtk_image_menu_item_new_with_mnemonic’ is deprecated (declared at /usr/include/gtk-3.0/gtk/deprecated/gtkimagemenuitem.h:76): Use 'gtk_menu_item_new_with_mnemonic' instead [-Werror=deprecated-declarations]
s->powerdown_item = gtk_image_menu_item_new_with_mnemonic(_("Power _Down"));
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These errors don't seem user initiated, so forcibly printing to the
monitor doesn't seem right. Just use error_report.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Right now relative mode accelerates too fast, and has the 'invisible wall'
problem. SDL2 added an explicit API to handle this use case, so let's use
it.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unbreaks relative mouse mode with sdl2, just like was done with sdl.c
in c3aa84b6.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes the behavior in the relative mode to be compatible
with other UIs, namely, grabbing the input at the first left click.
It improves the usability a lot; otherwise you have to press ctl-alt-G
or select from menu at each time you want to move the pointer. Also,
the input grab is cleared when the current mode is switched to the
absolute mode.
The automatic reset of the implicit grabbing is needed since the
switching to the absolute mode happens always after the click even on
Gtk. That is, we cannot check whether the absolute mode is already
available at the first click time even though it should have been
switched in X11 input driver side.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's pretty annoying that the pointer reappears at a random place once
after grabbing and ungrabbing the input. Better to restore to the
original position where the pointer was grabbed.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The relative pointer tracking mode was still buggy even after the
previous fix of the motion-notify-event since the events are filtered
out when the pointer moves outside the drawing window due to the
boundary check for the absolute mode.
This patch fixes the issue by moving the unnecessary boundary check
into the if block of absolute mode, and keep the coordinate in the
relative mode even if it's outside the drawing area. But this makes
the coordinate (last_x, last_y) possibly pointing to (-1,-1),
introduce a new flag to indicate the last coordinate has been
updated.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDK motion-notify-event isn't generated when the pointer goes out
of the target window even if the pointer is grabbed, which essentially
means to lose the pointer tracking in gtk-ui.
Meanwhile the generic "event" signal is sent when the pointer is
grabbed, so we can use this and pick the motion notify events manually
there instead.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Otherwise, the index of an input device like a usb-kbd is silently accepted.
(qemu) info mice
Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse
(qemu) mouse_set 1
(qemu) info mice
Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse
Also replace monitor_printf() call in do_mouse_set() with error_report() and
adjust error message.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK without VTE is needed for hosts which don't support VTE (for example
all variants of MinGW), but it can also be reasonable for other hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Current tablet + spice is unusable. Regressed with the UI input rework.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are currently three types of object_property_add_link() callers:
1. The link property may be set at any time.
2. The link property of a DeviceState instance may only be set before
realize.
3. The link property may never be set, it is read-only.
Something similar can already be achieved with
object_property_add_str()'s set() argument. Follow its example and add
a check() argument to object_property_add_link().
Also provide default check() functions for case #1 and #2. Case #3 is
covered by passing a NULL function pointer.
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Tweaked documentation comment]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some object_property_add_link() callers expect property deletion to
unref the link property object. Other callers expect to manage the
refcount themselves. The former are currently broken and therefore leak
the link property object.
This patch adds a flags argument to object_property_add_link() so the
caller can specify which refcount behavior they require. The new
OBJ_PROP_LINK_UNREF_ON_RELEASE flag causes the link pointer to be
unreferenced when the property is deleted.
This fixes refcount leaks in qdev.c, xilinx_axidma.c, xilinx_axienet.c,
s390-virtio-bus.c, virtio-pci.c, virtio-rng.c, and ui/console.c.
Rationale for refcount behavior:
* hw/core/qdev.c
- bus children are explicitly unreferenced, don't interfere
- parent_bus is essentially a read-only property that doesn't hold a
refcount, don't unref
- hotplug_handler is leaked, do unref
* hw/dma/xilinx_axidma.c
- rx stream "dma" links are set using set_link, therefore they
need unref
- tx streams are set using set_link, therefore they need unref
* hw/net/xilinx_axienet.c
- same reasoning as hw/dma/xilinx_axidma.c
* hw/pcmcia/pxa2xx.c
- pxa2xx bypasses set_link and therefore does not use refcounts
* hw/s390x/s390-virtio-bus.c
* hw/virtio/virtio-pci.c
* hw/virtio/virtio-rng.c
* ui/console.c
- set_link is used and there is no explicit unref, do unref
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
this fixes invalid rectangle updates observed after commit 12b316d
with the vmware VGA driver. The issues occured because the server
and client surface update seems to be out of sync at some points
and the max width of the surface is not dividable by
VNC_DIRTY_BITS_PER_PIXEL (16).
Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This matches the behavior of SDL, and makes the mouse usable when
using -display gtk -vga qxl
https://bugzilla.redhat.com/show_bug.cgi?id=1051724
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We were using the wrong coordinates, this fixes things to match the
original gtk2 implementation.
You can see this error in action by using -vga qxl, however even after this
patch the mouse warps in small increments up and to the left, -7x and -3y
pixels at a time, until the pointer is warped off the widget. I think it's
a qxl bug, but the next patch covers it up.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As long as we have no persistent GTK configuration, this allows to
enable the useful grab-on-hover feature already when starting the VM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fix warning with CONFIG_GTK=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hook into scroll-event to properly forward mouse wheel movements to the
guest, just like we already do in SDL.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Restores traditional behavior: Keyboard input will be routed to the most
recently added keyboard. Without this all kbd input goes to the ps/2
keyboard, even if you add a usb keyboard to your guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
